Job Description & Requirements

RESPONSIBILITIES :·

. Coordinate with various government/utility agency for initial site clearance.

. Liaise with all agencies and authorities such as LTA, Town Councils, PUB, SPPG, SP PowerGas, NParks, Starhub & Singtel, M1 and etc to facilitate the work progress.·

. Review, plan and schedule the site activities for diversion works·

. To coordinate with client/ consultants / QP (S)on any discrepancy on drawings or specifications·

. Conduct site inspection from time to time

. Report on daily issues to Construction Manager.

. To coordinate subcontractor meeting for utilities work·

. To obtain approval and official submission from relevant authorities for any services diversion and traffic diversion within the work site·

. Supervise excavation related work related to utility.

. Supervise civil works.

REQUIREMENT (E.g. Qualifications, Certifications, Experience) :·

.Tertiary Education in Civil Engineering fields

. Min 5 years related experience in relevant fields with at least 2 years experience in coordination with utilities agencies for projects of similar scale, complexity and nature of works.

. Able to work shift works when required

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Want to be part of a fun and exciting team in one of the fastest growing IT companies in Singapore? Xtremax is an established IT company that provides IT services such as website development and design to government agencies and private companies to help them transform their digital experience. We are expanding and actively looking for an experienced and highly motivated individual for the Technical Support role.

Responsibilities:

• Provide customer support by answering phone and email enquiries
• Primary investigation, information gathering before escalating to internal team for further diagnosis
• Manage operational issues/risks in a timely manner; escalating when necessary
• Keep track of service requests to meet service KPIs
• Follow standard operating procedures, and respond professionally
• Communicate effectively between customers and development team on escalated issues
• Understanding of issues raised by customer
• Good sense of ownership to customers’ reported issues and track them through resolution and bring to closure of ticket raised
• Serve as a key point of contact based on agencies assigned
• Cross functional collaboration: You are required to work with different teams within our organisation to meet the needs of our business.
• Escalate critical issues / roadblocks to the Technical Support Team Lead

Requirements

• Minimum polytechnic diploma in IT, computer engineering, or relevant experience
• Preferably have knowledge in cloud services (eg. Microsoft 365, Amazon Web Services, Microsoft Azure, Google Cloud)
• Preferably have knowledge in ticketing system (JIRA)
• Good interpersonal and communication skills
• Strong analytical and problem solving/troubleshooting skills
• Strong interest in technology
• Ability to communicate highly technical information to both technical and non-technical customer audience
• Ability to work independently and as a team in a dynamic environment

By submitting your resume/CV, you consent and agree to allow the information provided to be used and processed by or on behalf of Xtremax Pte Ltd for purposes related to your registration of interest in current or future employment with us and for the processing of your application for employment.

You also represent to us that you have obtained the consent of your referees when you disclose to us their personal data for the purpose of conducting reference checks.

The personal data held by us relating to your application will be kept strictly confidential and in accordance with the PDPA. You may also refer to our Privacy Policy for more details here: https://www.xtremax.com/privacy-policy

We regret to inform you that should you not consent to providing the necessary data required for us to process your application, your application will be considered void.

Apply for this job

Responsibilities:

• Setting up of AOI machines.
• Machine alignment, teaching and testing.
• Ensure machine meet customer specifications.
• Able to do machine troubleshooting

Requirements:

• NITEC or Higher NITEC, Diploma in Mechanical or Electrical Engineering.
• With minimum 3 years of experience in the semiconductor industry.
• Experience in automation industry.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Roles & Responsibilities

M&E Engineer is responsible for :-

JOB DESCRIPTION:

· Monitor and report on the progress of work to project manager;

· Control the progress of shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved;

· Carry out inspection of M&E works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record;

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality;

· Responsible for conducting inspection to meet with construction schedule;

· Provide and maintain all site inspection records & T&C records up to date;

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements;

· Provide and maintain all site inspection records & T&C records up to date;

· Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

REQUIREMENTS:

· Diploma / Degree in Mechanical or Electrical Engineering;

· Min of 2 years’ work experience related projects in Singapore building and construction industry;

· Strong Electrical/Mechanical knowledge with hands-on experiences;

· Sound knowledge in BIM, Revit, Autocad would be an advantage;

· Good communication skills with the ability to coordinate with site teams to execute work

Job Responsibilities:-

• Define, architect and document the Design-for-Testability (DFT) concept for SOC’s
• Develop, implement and verify DFT measures
• Work closely with cross-function teams (design/verification, physical, and operation) to ensure all test requirements are met and DFT function is correctly implemented for effective DFT solutions
• Achieve target structural test coverage for logic, memories, serdeses and other mixed signal IPs
• Test pattern generation/verification/post-silicon ATE support

Job Requirements:-

• Master's or Bachelor Degree in Electronics and Communications Engineering or equivalent
• Minimum 10 years of working experience in DFT field
• Good knowledge in Boundary Scan, ATPG Scan, Synopsys SMS and/or MBIST is a must
• Working experience in industry standard tools like Test Kompress, DFT advisor, DFT Compiler, Mentor’s SSN and OCC controller are desirable
• Knowledge of full VLSI RTL2GDSII design flow
• Knowledge in high level programming and script writing
• Knowledge in HDL, synthesis, static timing analysis and constraining will be an added advantage
• Some Experience in Test development and Product engineering

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

As a Process Development Engineer, you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

• Excellent execution on assembly process for 1st New Product Introduction (NPI) success and smooth transfer process from NPI to HVM
• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with cross functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and utilize key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:-

• Masters or Bachelor's degree in Mechanical/ Materials Engineering
• Experience in backend engineering process or package development preferred
• Good technical knowledge in component test and/or module manufacturing process
• Excellent data analysis, statistical analysis, data interpretation skills
• Ability to make sound data-driven decisions. Prioritize and apply due-diligence in day to day task.
• Possess analytical and problem solving skills
• Keen interest in semiconductor engineering
• Showcase leadership experience and potential

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

As a Package Design Engineer within the Package Development and Engineering (PDE) organization in Micron Technology, you will provide package definition and designs for advanced semiconductor devices. You will be working with a multi-functional team across several geographies to create package design databases such as package stack-up, simulation, route-study, substrate/lead frame layout, wire bond diagrams, and other design documentation. You will be ensure the completion of design activities within the project schedule and ensure that design outputs are within Assembly and vendor capability.

Responsibilities will include, but are not limited to:

• Conduct feasibility studies for various package options and assess designs for manufacturability and reliability.
• Work closely with multi-functional team to address packaging design challenge in the area of layout, electrical, thermal, mechanical, assembly and reliability.
• Interact with PDE assembly team and external assembly subcontractor partners to recommend package solutions to meet customer and/or market requirements
• Generate and update assembly documents in database. Provide drafting and drawing support for package drawings, interposer drawings, and manufacturing drawings.
• Support package and DFMEA reviews with assembly engineering and subcon teams.
• Support package technology development, including material selection, process development, DOEs, and related activities
• Support package technology development, including material selection, process development, DOEs (Design of Experiments), and related activities.
• Track and drive program milestones to ensure timely development execution.
• Provide design support for thermal/mechanical/electrical simulation analysis.
• Support and contribute to the Global Design, Simulation and Substrate (GDSS) team on continuous improvement efforts such as:Global design alignment activities
  Continuous improvement efforts
  Package design rules
  Package roadmaps
  Competitive Analysis review

Requirements:

• Master (preferred) or Bachelor of Science degree in Electrical Engineering or Mechanical Engineering with a minimum of 5 years of experience in semiconductor packaging industry OR PhD graduates in Electrical Engineering
• Candidates must possess a strong design knowledge of high-density (Wirebond + Flip-Chip) packaging architectures, die stack-up, packaging layout optimization.
• Excellent communication skills, both oral and written in English.
• Excellent problem solving and analytic skills.
• Experience with Cadence SIP, APD and AutoCAD software tools is preferred.
• Good understanding of Silicon IP, floorplan and Signal/Power Integrity is a plus.
• Ability to work independently, prioritize and manage numerous projects with minimum supervision.
• A global perspective and the ability to work in a multicultural environment.

Performs semiconductor design engineering assignments including engineering and designing packaging stack-up, layout checking, documenting specifications, modifying and evaluating packaging risk in the areas of electrical, thermal, mechanical and reliability. Reviews package design requirements, define the package stack-up and conduct final design review. Typically responsible for projects, or portions of projects, to design, fabricate, modify, and evaluate semiconductor Packaging.

Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Lead in Site Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years experience in Building Engineering projects
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Organized, meticulous with positive work attitude
• Able to work independently and a team player
• Good analytical, supervision, and communication skills
• Completed QM project and a registered Core-trade Foremen/ Supervisor would be an added advantage

Your main responsibilities include:

• Develop and maintain product datasheet testing and characterization test programs for NAND and NOR components
• Working with product reliability engineers to define test flows for individual products
• Provide support to operation team to ensure seamless execution for generated test flow on the tester with live product
• Perform electrical failure analysis for failure validation and characterization

You are encouraged to apply if you can demonstrate some of the qualities listed below:

• Master's or Bachelor's degree in Engineering field. Microelectronic/Electrical/Computer Engineering fields are preferred.
• Positive attitude and self-motivation towards learning and development.
• Good analytical mindset and structured personality.
• Good written and verbal communication skills.
• Hands on experience with C++/Python and Object-Oriented Programming is a plus
• Understanding Automated Test Equipment and flash memory is a plus.
• Fresh graduates are welcome to apply.

Working location:

• 990 Bendemeer Road, Singapore 339942

Responsibilities:

• Install, configure, troubleshoot and support servers or virtual machines (Hyper-V / VMware) running on Windows Server operating systems.
• Perform system maintenance, upgrade, patches and incident resolution outside of working hours when required.
• Monitoring and implementing backup solutions for critical systems and data regularly.
• Implement and maintain IT security measures and best practices for systems and address security incidents with latest security trends.
• Assist in the planning and implementation of IT projects, ranging from system upgrades to new system deployments.
• Create and update technical documentation pertaining to systems administration for on-premise systems, Azure and Microsoft 365.
• Any related ad-hoc duties as assigned.

Requirement:

• Minimum 3 years of experience as a System Engineer or Server Administrator.
• Experience with Active Directory, Group Policy, Virtualization, Patch Management, Microsoft Entra and Microsoft 365.
• Experience in cloud platforms such as Azure and AWS.
• Possess excellent communication, problem-solving and analytical skills.
• Ability to work independently.

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

About Us:

We develop comprehensive software products and solutions ranging from IT consultancy to infrastructure and hardware setup to optimise customers' experiences. To establish ourselves as a leading provider of applications and healthcare support services for the Asian market, and partner healthcare customers to build a safe medical environment for all.

We are driven by our group philosophy as defined below:

1. Provide the best to our customers through a service-oriented culture

2. Create new value through innovation

3. Realise greater possibilities through advanced technology

Roles and Responsibilities:

• Responsible for providing technical assistance and support related to computer systems, hardware or software testing
• Responds to queries, runs diagnostic programs, isolates problem, and determines and implements solution
• Provide technical assistance and support for incoming queries and issues related to computer, systems, software, and hardware
• Respond to queries either in person or over the phone
• Write training manuals
• Maintain daily performance of computer systems
• Respond to email messages for customers seeking help
• Ask questions to determine nature of problem
• Walk customer through problem-solving process
• Install, modify, and repair computer hardware and software
• Run diagnostic programs to resolve problems
• Are required to apply information security in accordance with the established policies and procedures of the organization.

Requirements:

• Diploma or Certificate in IT/Computer Engineering with 1-2 years of working experience in technical support
• Experience in basic networking support
• Experience in supporting OS platforms such as Windows 10 and MS Office applications
• Prefer candidates who are resourceful, good working attitude & takes initiative
• Good communication skills and administrative skills

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

As a Process Control System Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

As a PDE Network Engineering Process Control System (PCS) Engineer/Senior Engineer, we will be responsible to develop smart manufacturing solutions towards the Industry 4.0 standard. We will gain exposure and knowledge in many cutting-edge areas including Machine Learning, Advanced Control Solutions and Deep Learning. As a PDE PCS Engineer, we will have the opportunity to develop a complete solution that starts from requirements gathering, data analysis and modeling with big data platform, followed by system development and integration; and then network wide implementation. The work we do directly affects the bottom line of the entire company by providing scrap/excursion control, Statistical Process Control (SPC), Advanced Process Control (APC or Run-to-Run), Fault Detection and Classification (FDC), and overall enhanced process capability. We will meet regularly and team with Process areas to understand their tools, processes, and challenges and work with them to create process control models, strategies, and other methods for ensuring quality output.

Responsibilities

• We develop, implement and improve smart control solutions for optimum manufacturing performances.
• We provide technical oversight, guidance and support for process control implementation
• We conduct intensive data analysis and modeling to identify sources of variation in the process and translate it into control solutions.
• We support PDE KEG team in Classification, Characterization and Categorization and define Data Collection Requirements, Perform Integration and Setup Data Collection in E3 Environment.
• We define Analysis and setup Requirements and Setup Limits and OCAP and engage in periodic review with PCS team and network on BKM practices.
• We develop and deliver training on control systems and related topics.

Requirement

• PhD, Masters/Bachelor’s Degree in Electrical and Electronics Engineering/Computer Science/Statistics/ Mathematics/Physics
• At least 4 years of experience in semiconductor manufacturing advanced process control.
• Experience and knowledge in Programming and Data Analysis. Preferred experience in Python/R/SQL/Hadoop eco-system and/or in the development of web-based applications
• Familiar with Machine Learning.
• Good communication and interpersonal social skills.
• Excellent problem solving and analytical skills.
• Excellent verbal and written communications skills. Good interpersonal skill and a good teammate.
• Excellent Project management skills.
• Ambitious and ability to multi-task and balance dynamic priorities.
• Ability to participate in a multi-functional team environment.
• Willing and capable of international travel, as needed, to accomplish your objectives.

Keen on the role? Apply now!

Position: Software Developer

Experience: 10+ Years

Skills:

Mark-up Languages: HTML, HTML5, CSS, CSS3

Script Languages: Java Script, jQuery

Database: MySQL, Oracle

CRM Tools: Adobe Campaign Classic/Standard, Eloqua, Oracle Sales Cloud,

Events Tools: ERS (Event Registration System), Certain EMS

Content Management Tools: Universal Content Management (UCM) - Stellent

Reporting Tools: MS-Excel

Web Design Tools: Adobe Dreamweaver CSS

Photo Editing Software: Adobe Photoshop

Operating Systems: Windows

Key Responsibilities:

• Excellent knowledge of Adobe Marketing Cloud and its architecture.
• Should have knowledge of Enterprise Marketing Management across multiple channels of Communication (EMAIL, MAIL, SMS, PUSH etc)
• Should extensive knowledge of Adobe Campaign at architecture level and to do customization
• Should have knowledge of integrating Adobe Campaign with Adobe Analytics, Adobe Experience Manager etc and other components of Adobe Marketing Cloud.
• Excellent knowledge of Adobe Campaign Administration, Configurations and User Management
• Works closely with DATA Management Team and good knowledge in DATA Governance, DATA Assimilation.
• Should have knowledge of Landing Pages, Forms architecture for development of secure web application development and deployment process.
• Should have knowledge on Adobe Components Deployment options, Both on-premise and Cloud.
• Should have knowledge of Adobe Campaign Deployment options and Migration strategy.
• Should have knowledge of integration Third party applications/software with Adobe Campaign
• Work with Project teams/Tech Lead/Developers in defining application architectures and implementation to ensure adherence to business requirements, technology standards, best practices, business strategies
• Translate requirements into detailed solutions for the new platform
• Lead technical design sessions; architect and document technical solutions that are aligned to project objectives
• Develop technical and conceptual design in support of the overall application design with respect to Adobe Marketing Cloud
• Defines integrations between the Adobe Marketing Cloud Products (Adobe Analytics, Adobe Audience Manager, Adobe Target and Dynamic Tag Management)
• Designing a solution architecture and to identify the components and Templates for Campaign Management - Segmentation Workflows, Technical Workflows and Delivery Workflows.
• Marketing Experience with sound digital marketing management experience
• Banking retail campaign experience is preferred.
• Creating data import workflow to pull data from SFTP/NAS/ drive, GRD (hive) and data export workflow to push the data into SFTP/NAS drive.
• Implemented Email/SMS/Push/Direct mail channel for automated campaign.
• Developing e-mail templates using HTML, HTML5, CSS, CSS3, JavaScript and jQuery
• Creating Campaign Workflow and creating E-mail pages compatible in different languages for Oracle Product Campaigns in Email Execution Tool
• Providing information related to software bugs and defects by collecting, analyzing, and summarizing development &service issues
• Managing testing which include iteration test planning, test cases, test scripts, regression testing, raising and retesting bugs, ensuring that organizational and quality standards are met
• Monitoring project progress as per scheduled deadlines for various tasks and taking necessary steps to ensure completion within time and effort parameters
• Providing Training to User/Client after successful completion of adobe campaign implementation.
• Revising, editing or changing the existing web pages to keep the web portal up to date
• Designing, developing & implementing the workflow program, presentation and managing various phases of interface development based on technical specification
• Extending high technical support on servers &ensuring high customer satisfaction levels through prompt redress of problems
• Communicating with internal/external clients to determine specific requirements and expectations; managing client expectations as an indicator of quality
• Mapping client's requirements and providing them the best IT solutions involving evaluation of options, definition of scope of project, and finalization of project requirements
• Administering and leading team members; allocating resources among team members and guiding team members during the project, till final delivery

Experience: 9+ Years

Skills:

Languages: Pig, Hive, Hbase, SQL, Sqoop, Python, Flume, Spark, Kafka

Spark, Apache Nifi,

Frameworks: Hadoop.

Java IDEs: Eclipse.

Databases: Oracle, SQL (DDL, DML, DCL).

Key Responsibilities:

· Defines, develops or modifies application modules or enterprise-wide software systems using disciplined software development processes and makes modules production ready by moving them to libraries, completing forms, following procedures, completing version control documents

· Develop Hadoop and Web-Service based applications and components

· Interface with Users, BAs, and Developers to walk through data design

· Define comprehensive unit test coverage of data transformations

· Demonstrating analytical technical skills

· Should have basic knowledge in BSS data model specially CRM, OMS, Billing

· Be part of a team of Hadoop developers working on Big Data project with ample opportunity to grow professionally, functionally and technically

· Work with other groups to ensure smooth delivery with high standards and quality

· Understand requirements, propose and deliver superior solutions

· Write well-structured beautiful clean code.

Key Requirements:

· Understanding of Big Data Hadoop Ecosystem components (Sqoop, Hive, Pig, Flume)

· Experience with Java or Big Data Technologies a plus

· Any big data experience with Hadoop, HDFS, cluster management

· 6 years' experience in designing & developing enterprise application solution for distributed systems

· Experience with Hive, Pig & Map Reduce and Hadoop ECO system Framework

· Experience with HBase, Talend, NoSQL databases-Experience Apache Spark or other streaming big data processing preferred.

· 3.5 years of exclusive experience in Hadoop and its components like HDFS, Apache Pig, Hive, Sqoop, Spark, Hbase, NIFI, Cassandra

· Extensive Experience in Setting Hadoop Cluster.

· Good working knowledge with Map Reduce and Apache Pig

· Involved in Design and Development of technical specifications using Hadoop technology

· Involved in writing the Pig scripts to reduce the job execution time

· Involved in developing the Hive Reports.

· Very well experienced in designing and developing both server side and client-side applications.

· Good knowledge and experience in Hadoop Administration.

· Installation and configuration of Hadoop and associated applications.

· Setting up Hadoop in various modes and integrating Hadoop Ecosystem with Hadoop.

· Worked with several key customers in India, USA and Europe for planning & implementing their strategic programs and initiatives

· Excellent communication, interpersonal, analytical skills, and strong ability to perform as part of team.

· Exceptional ability to learn new concepts.

· Hard working and enthusiastic.