Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering

More than 4 years Experience

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

Job Description:

- Maintain, troubleshoot and repair of electronic assemblies

- Liaise and engage with customer in maintenance programme

- Maintain, troubleshoot and repair of automation machines

- Assemble electronic assemblies for production

- Identify and resolve production issues

Job Requirements:

- Degree in Electrical and Electronics Engineering

- Skilled in troubleshoot and repair of electronic assemblies

- Familiar with electronic equipment

- Skilled in soldering

- Able to lead, work and communicate effectively in a team

• Design, analysis and plan for security system engineering works
• Liaise with other consultants, contractors & authorities from inception to completion of projects
• Responsible for timely submission of plans and reports to authorities and clients
• Manage projects to meet the time, cost and quality objectives
• Prepare tender specifications and drawings for tendering of construction contracts, including evaluating of tender submissions and make appropriate recommendations to clients
• Coordinate and monitor work progress at site including periodical site inspection and attending meetings during course of construction of projects

Requirements:

• At least a good degree in an engineering discipline, preferably recognised by the Professional Engineers Board
• Proficiency in Engineering software such as AutoCad, BIM
• Good communication skills and the ability to work in a team
• Self-motivated, innovative thinker and willing to take on new challenges

Project engineer will be under Contruction service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience as Contruction Industry.- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.- Able to working at Height.

Must have experience in oil & gas components

Familiar in all kind of measuring instruments include CMM

Threading knowledge is Mandatory(ACME, BUTTRESS, IF CONNECTION)

Problem solving skill & commuicate with customer

Must attend API auditing, resolve NCR issues raised by customer and raise NCR internally.

Maintain API & ISO documents.

Must prepare COC and fulfill customer requirements

Job Responsibilties

• To prepare project QA & QC related documentation for wind farm related structure/submarine cable transportation and installation/ testing/ commissioning.
• To perform internal and external coordination to meet project quality requirement as per project quality plan.
• To implement and monitor project quality related compliance.
• To conduct fabrication site inspection as required at designated fabrication site, at various construction stages.
• To assist Project Manager in preparing project quality related documents to fulfil owner’s requirement.
• To assist in procurement of quality related items for operation.
• To coordinate with Project Engineer/Manager/T&I Manager in fulfilling quality related matters in project management.
• To be able to liaise with engineer for efficient workflow and contributing to better idea to improve work method.
• Respond to incoming requests for information, requests for proposals in a professional and creative manner.

Job Requirements

• Minimum Diploma/Bachelor’s Degree in Science/Engineering or equivalent
• MIn 5 years of relevant experience in the Oil & Gas, Renewal Energy industry
• Proficiency in ISO 9001:2015 Quality Management System
• CSWIP 3.1 certification or higher
• NDT Level II certification or higher
• Fluent in both English and Mandarin, with strong written skills in both languages
• Travelling is required when necesary

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation

Job description

GOAL OF THE POSITION

This role is to ensure we translate our customers' instructions into PTS's work instructions - to best coordinate schedule between Workshop and the respective Test Departments.

RESULT AREAS/CORE ACTIVITIES

Operational & Leadership tasks:

1. Ensure client instructions were properly documented and communicated downstream

• Interpret customer's documents
• Ensure Customers' instructions align with the work scope stated our Quotation
• Cross-reference customer's instructions with reference specification(s)
• Ensure proper markings of Samples for machining/cutting
• Comprehensive and accurate input in DWO

2. Ensure there is clear internal communication pertaining to the job, including:

• Check for all internal (e.g., quotation) and external (e.g., mill certificate) documents
• Ensure they are uploaded to our Document Management System
• Ensure instant update of the documents whenever there are changes
• Ensure instant communication of any changes to downstream personnel

3. Oversee the scheduling and coordination of the test jobs with Workshop and Testing Department(s), including:

• Ensure there is prioritization of jobs
• Ensure anticipation of longer lead time for jobs that require special preparation works for specimens or fixtures

4. Engage customers with the aim to build & maintain strong relationship with customers, including:

• Understand customers' testing objectives;
• Attend to Customers' enquires and to provide professional technical advice
• Advise Customers on potential problems they might face
• Gives advice to Customers on minimum sample requirement
• Advise customers on applicable codes and specifications and associated tests and test methods
• Advise customers on required turnaround time and test schedule
• Advise customers on test outcomes and possible follow up actions

5. Work with Draftsman to draw up sample plans to advise customers and instruct workshop on cutting/machining

Administrative Tasks:

• Write and review department SOPs and work processes

Learning & Development Tasks:

• Attend cross training in the respective Test Departments & Workshop
• Conduct training to the juniors as well as Employees from Workshop
• Establish Training syllabus and Training materials

FORMAL PREREQUISITES FOR THE POSITION

• Master of Science or Master of Engineering in Mechanical Engineering / Material Science; or
• Bachelor of Science or Bachelor in Mechanical Engineering or Material Science

Technical Skills:

• At least 4 years in an ISO 9001 Manufacturing or QAQC role or equivalent; or
• 4 years of experience working under an ISO 17025:2017 based Quality Management System (QMS)
• Strong knowledge in common metallic materials and alloy specifications and chemical composition, especially in steels, stainless steels, nickel alloys, cobalt alloys, aluminium alloys, titanium alloys.
• Good knowledge on metallic material properties and their industrial purposes
• Good knowledge of welding consumables and processes and their applications
• Good Understanding of measurement uncertainty and factors contributing to it

Other Skills:

• Build and maintain good relationship with Customers
• Good communication skills (provide technical advice and explanation to customers on work/test performed)
• CWI or CSWIP 3.1 (will be an added advantage)
• PCN Level 2 in Visual Inspection (will be an added advantage)

Principal Responsibilities

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• Planning and Execution of all Equipment (Rotating) Preventive Maintenance and Corrective Maintenance .
• Review all documents available in GDMS and work with LE to prepare equipment BOM and upload into SAP system.
• Condition Monitoring of Rotating Equipment through Online and Offline Vibration Analysis, Oil Analysis and other techniques.
• Planning, execution and monitoring of contractor routine and non-routine maintenance activities and perform troubleshooting or provide guidance where issues arise.
• Planning and coordination of shutdown maintenance activities of Rotating Equipment based on local and Global PM requirements, Vendor recommendation & Industrial Best practices.
• Review risk analysis and maintenance procedures on regular basis.
• Upkeep maintenance records for equipment modifications, repair and rerating on regular basis
• Identify and update discrepancies in plant equipment records or on field.
• Participate in the root cause analysis (RCA) on process incidents and process inducted mechanical failures, recommend corrective actions to permanently eliminate them and follow up on closure of the actions.
• Initiate the Engineering Management of Change (EMOC) and execute the changes for plant improvement and modification works.
• Facing External / Internal Audit and closing of the actions within given time limit.
• Identifying bad actors in the plant and reliability improvement by implementing short term and long term solutions.

Required Qualifications/Experience

• Degree in Mechanical Engineering with at least 7 years’ of maintenance experience in Oil & Gas / Petrochemical industry or Diploma holder with 10 years’ maintenance experience Oil & Gas / Petrochemical industry preferred.
• Experience in a Gas Plant such as Gasification/SMR/ASU is an advantage.
• Good conceptual knowledge on design and maintenance of all Rotating Equipment such as Steam Turbine, Centrifugal Compressors, Reciprocating Compressors, Screw Compressors, Multistage Pumps etc.
• Good conceptual knowledge of Industrial standards such as API, ASME etc for Rotating & associated Static Equipment.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

Minimum six (6) years of engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control and eligible for application as a Resident Engineer or Recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least five (5) years of experience in the construction supervision for building projects with basement structures.

Job Description

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 5 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Responsibilities

• Carry out periodic inspection program to assure integrity of the static equipments viz., pressure vessels, heat exchangers, hydrocarbon piping, high pressure boiler etc.,
• Carry out statutory regulation requirements in coordination with various disciplines.
• Carry out detailed internal inspection of static equipment during planned shutdowns and Turnarounds.
• Troubleshoot integrity problems and provide reports on preventive/ corrective actions.
• Conduct failure analysis, analyse inspection/reliability data & develop improvement plan.
• Review design packages of the new projects especially on the material selection and design aspects of the static equipments.
• Inspection of the piping fabrication work, repair/reclamation welding, its quality and testing.

Requirements

• A bachelor degree in Mechanical Engineering or Material Science with at least 3 years of relevant working experience.
• Experience in refinery/petrochemical/air separation industry.
• Familiarity with static equipments standards/specification viz. ASME, API, BS, NACE etc and industry practices.
• Preferable to have certification in NDT techniques viz., UT, PT, Radiographic & MPT.
• Familiar with Eddy current testing, MFLT and other testing methods to assure the integrity of Heat exchanges.
• Conversant in welding codes, WPS and PQR.
• Able to work independently as well as in a team environment under tight schedules.

Description of the Role:

• To plan projects, establish project criteria, coordinate project reviews, and ensure the proper implementation of project elements.
• Responsible for the engineering and technical disciplines needed to complete a project.
• Assists Project Manager in the control, planning, scheduling, project execution, installation completion and final documentation.

Key Tasks

• To understand project scope, specification, deviation, and commitment requirements.
• Conduct site surveys with suppliers, contractors & clients for installation works.
• Coordinate with suppliers, contractors & clients for smooth delivery and timely completion of projects.
• Develop project schedule, execute and monitor the progress from project kick-off till project completion.
• Attend site meetings and get involved in discussions with clients and consultants.
• Work with different technical disciplines internal or external vendors to meet technical requirements.
• Prepare project documents and report submissions.
• Maintain proper documentation.
• Maintain good relationships with clients.
• Carry out any ad-hoc duties as assigned by Management.
• Assist to lead the team to execute the project.

Requirements

Education

• Diploma in Electrical/ Mechanical Engineering.

Knowledge / Experience / Others

• Minimum 1-3 years of experience is required for this field.
• Preferably with site experience in an industrial building or Government projects.
• Excellent project management and site coordination skills.
• PC literate (Microsoft Word, Excel, and PowerPoint)
• Possess valid Singapore driving license and prefer to have own vehicle

Personal Competencies

• Able to perform multitasking.
• Independent, team player with good interpersonal skills.
• Organized and strong leadership
• Good communication skills

Mandatory Skills

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

Company Introduction

SepPure Technologies is a CleanTech company revolutionizing energy-intensive chemical separation processes through the application of novel membrane materials and processes. We are passionate about making a positive impact on the world through sustainable technology. Our chemical-resistant nanofiltration membranes are disrupting traditional chemical separation processes, such as distillation and evaporation, reducing global energy use, emissions, and pollution. With up to 15% of the world's total energy spent on industrial-scale chemical separations, SEPPURE's sustainable process is a game changer. We are currently working on transformative projects in the edible oil, pharmaceutical, semiconductor, solvents, and fine-chemical industries. If you enjoy working in an innovative environment and want to be part of creating a sustainable future through CleanTech innovation, we have a great opportunity for you.

Job Description

SEPPURE Pte Ltd is seeking a dedicated and detail-oriented Research Engineer to join our Applications Team in Singapore. The Research Engineer will work closely with the team to develop flatsheet and hollow fibre membranes for organic solvent nanofiltration applications. The Research Engineer will also be required to plan and conduct experiments to evaluate the performance of membranes, based on robust engineering and scientific techniques. The Research Engineer may also be required to assist in the evaluation of data and provide recommendations for membrane development.

Key Responsibilities

Membrane research and development

• Keep up-to-date with latest membrane technology development
• Support the development of dope formulation for membrane fabrication
• Modify processes to improve membrane performance
• Develop methods for membrane characterisation and performance evaluation
• Ensure high repeatability for experiments and data collection
• Maintain documentation and databases for research and development

Qualifications

Must have:

1. B.Sc in chemical engineering or related fields
2. Good understanding of polymer chemistry, design of experiment, data analysis and process troubleshooting
3. Good problem-solving skills
4. Team player with strong communication skills

Good to have:

1. Working experience in developing hollow fiber or flat sheet membranes

Worked in a lab environment

Job Description

• Establish cost effective & low risk manufacturing process steps/planning from raw material to completion including special processes, for parts involving welding such as frames, vacuum welded chambers/parts
• Responsible to manage FA project schedule and ensure physical product meets specifications, within budgeted cost and committed timeline
• Designs and implements improvements to products, processes, tooling or documentation which enhance the utility, quality, reliability or cost effectiveness, encompassing health and safety in the area of responsibility
• Work with internal & external party to solve engineering issue and implement solution
• Hands on and work with internal stakeholders to ensure smooth production flow when needed

Requirements

• Diploma/Degree in Mechanical Engineering/relevant field
• At least 5 years’ experience on handling welding (TIG/MIG/MAG process) related products/vacuum chamber/frame
• Possess expertise in various type of welding and metal joining processes
• Well verse in the interpretation and qualification process of AWS, ISO welding specifications
• Working experience in the semiconductor industry will be a plus
• Good leadership and communication skills
• Able to carry out technical analysis independently

Principal Responsibilities

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.).
• Leading and guiding the Ops shift team during P&ID walkdowns, and preparing of operating procedures & reviews.
• Coordinate with Linde Engineering for walkdown, discuss action items and close out.
• Coordinate with Training Manager for training & competency development.
• Lead Operation's participation in SAT and pre-commissioning activities.
• Support relevant PSSR activities.
• Day to day monitoring of the plant and give guidance to the shift operation team.
• Planning and coordination of the job with Maintenance department.
• To troubleshoot the issues and processes when needed (routine as well as during outages).
• Plant optimization, evaluate critical operational processes and identify key areas to improve operational effectiveness.
• Preparation of Plant Turnaround tasks and coordination of activities.
• Initiate plant modifications and de-bottlenecking of plant equipment to improve performance and reliability.
• Lead root cause analysis (RCA) on process incidents and process inducted mechanical failures, recommend corrective actions to permanently eliminate them and follow up on closure of the actions.
• Participate in various PSM elements like Process Hazard Analysis (PHA) /Pre Startup Safety Review (PSSR), Hazop etc.
• Support implementation of Process Safety directives, guidelines and prepare reports as necessary.
• Review the Management of Change (MOC) and execute the changes.
• Support Operations Manager in preparation of operations budget.
• Support Projects during development, execution and commissioning, and provide Operational inputs at all stages, Supporting Business Development activity – preparing concept, PFD & P&ID.
• Support Invoice processing and Government regulation reporting.
• Facing External / Internal Audit and closing of the CARs in given time limit.

Required Qualifications/Experience

• Degree in Chemical Engineering with at least 7 years of operating experience in large scale complex plants (Refinery, Oil & Gas or Petrochemical preferred)
• Experienced in large plant commissioning
• Knowledge in Microsoft Office tools
• Strong leadership and organizing abilities
• Strong troubleshooting and problem-solving skills
• Team Player | Good communication skills | Collaborative | Learning attitude

Mandatory Skills

Responsibilities:

• Manage and drive z/OS Unix (Mainframe Access Management operations and audits).
• Lead the completion of z/OS initiatives such as MFA and straight through processing for IDM processing requests.
• Automate manual processes through scripting or via zSecure.
• Possess strong knowledge of designing and reviewing RACF access groupings.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous
• Bachelor’s degree in IT or equivalent. A major in IT security or related areas would be an added advantage.
• Minimum of 5 years of experience in Mainframe Security (RACF) administration/operations provided by z/OS UNIX system services (USS), CICS, DB2, and WebSphere MQ with hands-on regulatory compliance knowledge.
• Good to have strong experience with using zSecure Admin and zSecure Audit modules.
• Good working knowledge of Access Management lifecycle and processes.
• Experience in banking or financial services institutions preferred

Mandatory Skills

Job Summary:

Seeking a highly skilled and experienced z/OS Systems Programmer to be responsible for providing technical support for IBM's z/OS operating system, RACF, zSecure, MFA and subsystems including JES2, and USS.

Key Requirements:

• At least 8 years of experience working in a z/OS environment including experience with REXX, Assembler, COBOL, JCL, TSO/ISPF
• Install, configure, and upgrade z/OS and subsystems using SMP/E
• Monitoring system performance and perform system tuning
• Technical support for z/OS and subsystems including engagement of IBM and vendors for problem determination and resolution
• Experience with IBM z15 hardware and peripherals, able to perform hardware configuration changes using HCD/IODF
• Experience with system automation and scheduling tools such as IBM System Automation, Netview, IBM Tivoli Workload Scheduler(OPC).
• Familiarity and support of 3rd party software such as FileAid/Expediter, IBM Omegamon, RMF, ChangeMan
• Solid experience in mainframe security, RACF access controls, IBM zSecure, MFA
• Provide process automation support and maintain SOP documentation
• Support backup/recovery and disaster/recovery planning and testing
• Support periodic system configuration reviews and audit reviews
• Strong communication skills and the ability to work collaboratively in a team environment
• Experience with zLinux and zVM will be advantageous

Job Responsibilities

• Analyze, troubleshoot and resolve stamping related problems systematically to achieve productivity, quality and cost targets.
• Assist in stamping tool design reviews for new product development
• Work closely with the Production Team to achieve set goals and targets.
• Establish process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Identify / propose cost reduction program / upgrading to achieve quality and competitive cost to meet present and future stamping requirements.
• Provide technical guidance / training to Toolmakers / Production Technicians to ensure effective operations of the area.
• Train and lead a team of Toolmakers and Production Technicians
• Work to comply with safety requirements and maintain safe working habits.

Job Requirements

• Possess a Diploma in Mechanical / Production or NTC II in tool and die making.
• For diploma holders: Minimum of 5 years’ experience in high speed stamping environment.
• For NTC II holders: Minimum of 15 years’ experience in die maintenance and stamping.
• Taking initiative and contributing innovative ideas are advantageous to this position.
• Good analytical skills and time management capability.
• Able to read and interpret die and part drawing
• Possess good knowledge in metal forming and die making / die maintenance.
• Able to work under tight schedule.
• Able to plan work systematically
• Able to analyze problem for solution with minimum effort and time
• Experience in running mass production of precision parts is advantageous.
• Good interpersonal and communication ability
• Pleasant personality and a team player

· Develop detailed project plan that includes timelines/schedules, budgets, resources, risk assessments, etc.

· Perform engineering tasks such as developing designs, creating models, and conducting tests to ensure that designs meet specifications.

· Identify and resolve technical issues and problems that arise during the project, including clarification with customers.

· Co-ordinate with various teams, including design, manufacturing, construction, maintenance teams, etc to ensure project goals are met.

· Monitor project progress and Ensure project adheres to quality standards and regulations.

· Maintain effective communication with stakeholders, including clients, contractors and vendors.

· Co-ordinate and participate in activities such as FAT, commission & purchase of equipment for project, etc.

· Prepare & create template for project/technical document, including contracts, file, archive (physical & digital records) to ensure all team members have easy access to necessary documentation.

· Site (such as on vessel in the shipyard) survey and support

· Prepare ad hoc reports on project as needed.

Duties and Responsibilities.

• Installation and maintenance of supported Windows Server environments.
• Troubleshoot and resolve technical issues for end Users
• Assist in set up and maintenance of server hardware.
• Assist in supporting corporate network, workstations, printers, phones, etc.
• Tracking and detailed documentation of projects and assigned support cases.
• Setup Computers for End users, including installation of Productivity tools such as Office 365, Microsoft Office, Configuring user profiles.
• Installation and Maintenance of Networking equipment like Router, Switches, Access Point, Firewalls etc.
• Monitoring LAN/WAN for issues, performance

JOB Requirements

• Familiarity with Microsoft Server Operating Systems.
• Experience with Active Directory, DNS, DHCP server roles
• Experience with Hyper V and virtual machine implementation.
• Solid understanding of TCP/IP networking concepts.
• Experience working with Network Switch/Firewall/Access Points
• Experience with IT networks, services, and applications.
• Working knowledge of Wireless Networking Technologies.
• Must be a self-starter with a strong desire to learn.
• Must possess excellent written and oral communications skills.
• Attention to detail is a must.

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Fellow (Engineer, 3D Printer Hardware Developer).

Key Responsibilities:

The Research Fellow will be responsible for completing the construction and development of multi-material micro-nano 3D printers (experimental platforms) based on new processes, and to realize the manufacture and application of parts.

• Design the mechanical structure, control system architecture scheme, CAD model slicing scheme of the new multi-material micro-nano 3D printer, and complete the construction and development of the mechanical system;
• Based on the mechanical structure of the designed multi-material micro-nano 3D printer and the required process route, the automation of the system is realized, and the coupling development of the multi-material micro-nano 3D printer machinery and control system is completed;
• Realize the successful manufacture and application exploration of multi-material composite parts with complex shapes;
• Technical write up and presentation.

​

Job Requirements:

• PhD Degree in Mechanical Engineering/Automation/Control/Material Processing/Robotics.
• Experience in Design, construction and system integration of complex precision mechanical equipment.
• Experience in Additive manufacturing process and materials based on vat light curing (SLA, DLP).
• Preferably with experience or research experience building 3D printers from the ground up.
• Experience in C/C++ programming for embedded system and Machine GUI Design.
• Experience in development of SLA, DLP 3D printer (experimental platform);
• Experience in Preparation and application of functional polymers
• Experience in Solve practical engineering problems in the process of automation equipment development
• A team player and technically motivated to solve problems.
• Good interpersonal and communication skills.

We regret that only shortlisted candidates will be notified.

• Responsible for the maintenance and engineering of all process control systems which may be installed in the plant or externally at customers' site.
• Perform fine-tuning, troubleshooting, modification and programming of the Control System as needed to improve system performance and optimize process operation needs.
• Response to 24-hour emergency call-out and provide night-shift support during plant startup, shutdown and as requested by Operation Team.
• Work closely with the Instrument Team to troubleshoot and resolve instrumentation problems.
• Work with the Project Team to develop requirements and/or specifications of control system for projects and modifications; supervise & implement the project works according to the schedule and requirements.
• Plan and execute preventive and corrective maintenance works for plant turnaround.
• Perform strategy planning for control system expansion, upgrading and renewal.

Job Requirements

• Degree in Electronics/Electrical Engineering, major in control and instrumentation is preferred.
• Minimum 5 years of experience working and maintaining process control systems, especially
• Honeywell DCS, Siemens PCS7 and Triconex PLC. Familiar with the engineering tools and programming languages of these systems.
• 3-5 years working experience in the refinery or petrochemical industry environment.
• Experience and knowledge in field instrumentation and control valve are added advantage.
• Experience in control system expansion, upgrading and renewal projects.
• Self-confident and able to work independently with minimum supervision but also a good team
• layer.
• Able to multitask, perform well under high pressure and quick-changing environments.
• Familiar with Microsoft Office, Project, Outlook and SAP systems.
• Knowledge and experience with computer system networking and server/client environments.
• Good analytical, troubleshooting and problem solving skills.
• Good written and communication skill.