Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

Responsibilities:

• Preparation of process scheme/process flow diagram/FEED and process description
• Familiar with material and heat balance calculations and thermal rating of heat exchangers
• Development of process data sheets and able to perform NPSH/hydraulic calculation and equipment and line sizing
• Participate in Hazop Study and develop the P&ID
• Prepare material selection diagram and establish requirements for any chemicals, solvents and catalyst
• Perform relief valve sizing, control valve sizing and popping philosophy
• Prepare the equipment and line list and review the various equipment and instrument data sheets
• Interface/coordinate with other discipline for design development

Requirements:

• Degree in Chemical Engineering
• Minimum 8 years of design experience for process system in the oil and gas, chemicals storage and process environment. Candidate with more years of relevant experiences may be consider for a lead position.
• Familiar with respective code of practices for process design and fire protection such as API, NFPA, SS532, SS634 etc.
• Able to lead the process team

• Reports to the Construction Manager
• To ensure that day to day viaducts erection activities/operations are monitored at an appropriate level
• Plan, organize, supervise, and liaise closely with sub-contractors and operation teams on all ongoing viaduct erection activities
• Perform routine on-site checks and inspections to ensure compliance with authorities’ requirements.
• Liaise with various stakeholders on the safety aspect of any viaduct erection operations
• Generate reports to construction team regularly
• Liaise closely with WSH team to ensure operations comply with safety standards

Job Requirements:

• Degree in Civil Engineering or equivalent
• Minimum of 10 years of relevant experience in the construction industry; inclusive of 5 years experience in construction and supervision for vehicular structures and road projects (Road / LRT / MRT / Viaduct) is mandatory
• Technically expert and highly knowledgeable in the erection of viaduct segments is essential for this position
• Location : Woodlands
• Project : Viaducts

io-consultants is looking to expand its activities in Asia and is searching for Senior Consultants / Principal Consultants for projects to be based in Singapore. The candidate must be a team player, full of drive, articulate, creative and have a can-do attitude.

Responsibilities:

• Industrial engineering and automation consultancy services

• Understanding Clients’ requirements, perform data gathering, data analysis

• Research and develop new processes, operations and logistics concepts and ideas

• Work with Clients on Production and/or Logistics process re-engineering and design

• Perform process and equipment layout design work

• Prepare Systems & Equipment budget, specification, evaluation and selection

• Work with Systems & Equipment Suppliers and other Consultants in project implementation

• Manage given projects within agreed budget and schedules

• Project administration and reporting

• Lead, guide, train and motivate younger consultants

Requirements:

• Good recognised degree in Engineering. Graduate Degree would be a plus

• Good working knowledge in MS-Office (Word, Excel and PowerPoint)

• Very good spoken and written English, communications and presentation skills. Have a lot of self-confidence

• 10 or more years’ working experience, preferably in the any of the following industries: Food & Catering, Healthcare, Pharmaceutical, Logistics and Facility Planning. Consulting experience would be a plus.

• Ability to work in team and/or independently

• Able to travel for short assignments

• Must have initiative and self-learning

• Ability to lead projects and produce quality results

Remuneration:

• Can be discussed, depending on experience, know-how and ability to contribute

• Range (dependent on experience and qualifications): $10,000 - 14,000

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

The Field Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Department: R&D

Report to: R&D Director

Xnergy is a multi-VC funded and Sovereign-backed power solutions Pre-IPO company, the first in the world in high power universal contactless charging for global electrified mobility. Xnergy was voted a APAC 25 company in 2020 by Cleantech Group.

* The APAC 25 is an annual list of private sustainable innovation companies that have gained the attention of market experts. The 25 companies are regarded as having the potential to make a significant impact in a five-to-ten-year time frame.

Xnergy has a subsidiary company in Suzhou and an office in Boston and Munich. For more information, please visit Xnergy website: www.xnergytech.com.

Description

We are looking for a senior Firmware Engineer with experience in power electronics to join us in Singapore, with opportunities to travel overseas.

In this role, you will be responsible for the design, development and testing of the firmware and embedded control algorithm for Xnergy wireless power and power conversion products. This includes various stages in a product’s life cycle such as concept/ architecture, prototyping, evaluation, production ready firmware, manufacturing, and maintenance.

You will work closely with the R&D team (hardware, firmware, and software engineers) to contribute to power converter design and shape the development of our future product strategies.

You are expected to provide theoretical knowledge and hands on skill in power electronics control and algorithm, firmware architecture, microcontrollers, power management strategies.

Essential Functions/Responsibilities

1. Design and implement control algorithms and embedded firmware for high-power converters based on DSP/MCU using C/C++ programming language and model-based design methodology in line with the applied normative and standards practice.
2. Apply knowledge of CAN, SPI, USB, I2C, RS485, RS232 communication protocols to product development.
3. Plan and execute testing strategy including bench testing, validation testing, unit testing, integration testing, and system level testing.
4. Develop lab test tools, and support development of routine testing methods/systems for production systems.
5. Produce clear documentation for firmware design and test results.
6. Support identification and troubleshooting of discovered field issues, customisation requirements, create solutions, and disseminate knowledge.
7. Contribute to all phases of the firmware development life cycle including requirements analysis, architecture, design, implementation, testing, and release to ensure high quality production code.
8. Work closely with R&D team, field applications, and production teams for specifications, design, prototyping, and fabrication locally and remotely.
9. Contribute in selecting microcontrollers, schematics review, power management strategy, testing, debugging, and troubleshooting of power, digital, and analog circuit.
10. Finding root-cause and solve technical issues during new product development and product improvement as well as in field escalations.
11. Provide technical guidance and support to the software team.
12. Contribute in related technology roadmaps, features development, next generation product.
13. Plan and schedule to meet goals, deliverables, and deadlines.
14. Mentor junior engineers with an emphasis on controls.

Requirements

1. Bachelor’s/Master’s/PhD degree in Electrical/Electronic/Power Electronics Engineering or Computer Science or other related field.
2. Possess minimum 3 years of relevant work experience.
3. Good understanding and strong interests in power electronics, control and stability, topologies (e.g., AC/DC, PFC, DC/DC, DC/AC, LLC and resonant converter), analog/digital circuit.
4. Solid experience with embedded software development, firmware design, real time control and implementation in microcontrollers, DSPs.
5. Good programming skills (C/C++/assembly, python) and familiar with various development platform (microcontrollers, Linux, etc.) and development tools (compilers and debuggers).
6. Strong knowledge in various industrial communication protocol and the implementation (UART, USB, SPI, I2C, RS-485, CAN, CAN-FD, ISO-15118, IEC 61851).
7. Strong practical knowledge on schematics, engineering specs, testing, troubleshooting, debugging, including familiarity with equipment (oscilloscopes, multi-meters, power supplies, etc.).
8. Familiar with good development practices including design and code reviews, testing and regression, revision control, release, and user documentation.
9. Experience with Agile development methods such as Kanban or Scrum.
10. Self-driven, proactive, assertive, organised, disciplined, and able to work in a collaborative, fast-paced, team environment.
11. Good interpersonal skills, analytical skills, written and verbal communication skills in English and Chinese language.
12. Able to work in start-up environment with global, cross-cultural, and cross-functional engagements.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At Leica Microsystems, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

Shape the Future with Us!

At Leica Microsystems, we have been shaping the future for over 175 years with groundbreaking optical and digital solutions. With a culture rooted in customer focus, innovation, and teamwork, we lead the market in microscopy, imaging, and analysis, unveiling the invisible and empowering our customers to build a better, healthier world.

Joining Leica Microsystems means contributing to scientific discoveries and supporting surgeons in making critical decisions. Our advanced microscopes and AI-based image analysis solutions enable users to gain profound insights into development and engineering challenges. Here, you will work on meaningful projects alongside passionate colleagues, driving progress and pushing the boundaries of what’s possible.

Learn about the Danaher Business System which makes everything possible.

The Senior Quality Engineer, PQE is responsible to ensure the quality of both medical and non-medical products through rigorous inspections, implementation of quality control measures, and identification of areas for improvement. You will address production quality issues, collaborate with cross-functional teams to find root causes, and drive continuous improvement to build high-quality products that exceed customer expectations. The ideal candidate will possess a strong background in engineering or quality assurance, attention to detail, a proactive mindset, and preferably experience in people management.

This position reports to the Senior Manager Quality Assurance and is part of the Production Quality Engineering (PQE) team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Address production quality issues by identifying problems and collaborating with cross-functional teams to develop solutions for overall product quality improvement.
• Utilize statistical tools to identify trends and patterns for enhancing the production process and ensuring quality.
• Investigate and correct root causes of product failures occurring in the field.
• Conduct periodic production audits to ensure compliance with established policies, procedures, and control plans.
• Participate in lean and continuous improvement initiatives, while adhering to company EHS requirements to prevent injuries and maintain safety.

The essential requirements of the job include:

• Bachelor's degree in Mechatronics, Mechanical Engineering, or Electronics.
• At least 5 years of relevant experience in biomedical or medical device manufacturing.
• Proficient in statistical control methods and QMS 9001; familiarity with ISO13485, USFDA QSR/cGMP, and ISO14971 for medical devices is advantageous.
• Computer literate in MS Office and Lotus Notes.
• Strong analytical, problem-solving skills, and knowledge of lean and investigation tools such as 8D and fishbone diagrams, with a solid understanding of engineering principles, theories, and concepts.

Leica Microsystems, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Basic Responsibilities:

Ø Conduct research on Atomic Layer Deposition technology for perovskite solar cells

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with ALD process is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

STAr-Quest Technologies is seeking for a Field Applications Engineer to support customers in SE Asia territories. The ideal candidate should possess knowledge on semiconductor wafer level testing and has a broad mix of experience on device test application

Responsibilities:

• Provide pre-sales and post sales application support
• Perform on-site setup and troubleshooting of probe cards on ATE Systems
• Optimize setup parameters to maximize production yield
• Work closely with customers and HQ on technical issues and provide solutions to address problem
• Generate incident reports and identify steps to close issues
• Present findings and solution internally and externally

Employment Requirements:

• Possess a Diploma/Degree in Electrical/Electronic Engineering
• At least 2 years of technical and engineering support on Wafer Level Test & Measurement systems
• Excellent communication and troubleshooting skill
• Experience in Parametric and Functional wafer level testing
• Broad knowledge of automated and semi-automated test equipment and reliability testing
• Experience with Semiconductor Metrology tool, Wafer Probers and Testers is a plus

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.

About our group:

Servo team spans the globe from Singapore to the United States. We invent and deliver servo electronics and code to satisfy all HDD product requirements. We also develop the required test and debug systems hardware and software to build, debug and validate servo systems in HDD products.

The is an individual contributor role, reports to the Manager, based in Singapore.

About the role - you will:

• Bring up newer generation and maintain existing preamp related driver code.
• To Involve in development of next generation servo demodulation channel and SOC.
• Failure analysis on servo demodulation related drive failures.
• Develop new algorithms to enhance the robustness of servo system, especially servo channel, Preamp and power management.
• Be part of the team responsible for improving servo code process.
• Be part of the global servo team to deliver best in class servo design.

About you:

• Not afraid to take on unfamiliar engineering tasks and willing to learn.
• Naturally inquisitive with a strong inclination in technical research.
• Flexible working hours to attend either early morning or evening conference calls with global counterparts.
• Able to work under pressure and meet aggressive deadlines without compromising work quality, while maintaining a positive attitude
• Take initiative, teamwork and self-motivated.

Your experience includes:

• Bachelor’s degree or higher and/or equivalent experience
• Experience in programming languages, such as C, Python and MATLAB.
• Familiar with real time embedded systems and digital signal processing.
• Familiar with Perforce, Jira systems will be an added advantage.
• At least five years’ experience of HDD servo systems, HDD manufacturing process, servo related failure analysis, servo test, data crunching and analysis.

You might also have:

• Strong analytical skills

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules
• Check and ensure all the temporary work is carried out as per PE design

Requirements

• Degree in Civil Engineering or equivalent
• Min 2 to 3 Years Relevant Work Experience (C&S RC / building work)
• Proficient in English writing and speaking
• Microsoft application (words, excel, ppt etc)

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

*Position Overview:*

We are seeking a skilled and experienced Marine NavCom Service Engineer to join our team. The ideal candidate will have at least 4 years of hands-on experience in the installation, troubleshooting, and servicing of a wide range of marine navigation and communication systems, including but not limited to MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, and maritime IT equipment. Additionally, knowledge in IT/networking and VSAT systems is essential for this role. A General Operator's Certificate (GOC) is recommended. The candidate should also possess a general understanding of marine electrical and electronics systems. Flexibility and a willingness to travel are required for this position.

*Key Responsibilities:*

Install, troubleshoot, and service various marine navigation and communication systems including MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Conduct regular maintenance checks and inspections on installed systems to ensure optimal performance and compliance with safety regulations.
Diagnose and resolve technical issues efficiently to minimize downtime and ensure the continuous operation of onboard systems.
Provide technical support and guidance to onboard crew members regarding the operation and maintenance of navigation and communication systems.
Collaborate with internal teams and external stakeholders to coordinate installations, upgrades, and repairs as needed.
Keep abreast of industry developments, regulations, and technological advancements in marine navigation and communication systems.
Document all service activities, including installation procedures, troubleshooting steps, and solutions provided, accurately and comprehensively.
Qualifications and Experience:

Bachelor's degree or equivalent in Electrical/Electronics Engineering, Telecommunications, or a related field.
Minimum of 4 years of hands-on experience in the installation, troubleshooting, and servicing of marine navigation and communication systems.
Proficiency in the installation, configuration, and maintenance of MARINE RADAR systems, chartplotters, ECDIS, AIS, VDR, VHF radios, MF/HF SSB, autopilots, maritime IT equipment, and VSAT systems.
Strong knowledge of IT/networking principles and protocols.
General Operator's Certificate (GOC) is recommended.
Familiarity with marine electrical and electronics systems is desirable.
Excellent problem-solving skills and the ability to work efficiently under pressure.
Effective communication and interpersonal skills.
Flexibility and willingness to travel frequently, including assignments at sea or in remote locations.
Commitment to maintaining high standards of safety and compliance with regulatory requirements.
If you meet the above qualifications and are looking to join a dynamic team in the maritime industry, we encourage you to apply for this exciting opportunity.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications.
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Electrical or Electro-mechanical engineering, preferably with a focus on motion systems
• At least 7 years of relevant working experience (semicon or similar)
• Knowledge of electric design principles of cabling, connectors, safety systems, electronic racks, PCB design
• User of 3D design tools and schematic drawing tools (e.g. NX, SolidWorks, E-Plan)
• Basic programming skills and ability to debug electrical systems
• Understanding of motion control systems
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing interdependency between electrical, electromechanical and mechanical (sub)systems
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Description & Requirements

Key Responsibilities

• Execute a project or test cut for Aerospace and PM part
• Doing time study and making a fixture concept for Aerospace and PM HV part
• Provide machine operation training to customers.
• Provide on-site technical support to for pre sales activities
• Actively visiting customer for post sales support
• Preparing Aerospace sample for sales usage
• Runoff for HV PM
• Follow the workplace safety and health system, safe work procedures or safety rules implemented at the workplace.

Job Requirements:

• Diploma in Precision Engineering or equivalent
• Good communication skill
• Has a passion for Engineering
• Occasional overseas travelling is required
• Fresh graduates are welcome to apply

Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

The ASRS Operation Engineer is responsible for the maintenance, repair, and operation of Automated Storage and Retrieval Systems (ASRS) equipment to ensure optimal performance and uptime. This role involves performing preventive maintenance, diagnosing, and resolving technical issues, and supporting system upgrades and modifications to meet operational requirements. Taking up the role of Team leader of the shift.

Responsibilities:

• Operate ASRS equipment, including automated cranes, conveyors, and control systems, to perform material handling tasks such as loading, unloading, and storing goods in designated locations.
• Follow maintenance schedules and perform routine inspections and preventive maintenance tasks on ASRS equipment.
• Diagnose and troubleshoot mechanical, electrical, and software issues affecting ASRS equipment performance, using diagnostic tools, schematics, and technical manuals.
• Conduct repairs and replacements of defective components or parts, such as motors, sensors, actuators, bearings, and PLC modules, to restore equipment functionality.
• Coordinate with equipment vendors or service providers for technical support, spare parts procurement, and warranty/contract repairs as needed.
• Assist Maintenance Team in implement software updates, firmware upgrades, and system modifications to enhance ASRS performance, reliability, and safety.
• Monitor system operation through computerized interfaces or control panels, and respond promptly to alarms, error messages, or abnormal conditions.
• Ensure smooth operation with the aid of warehouse control system (WCS) and Humane Machine Interface (HMI).
• Ensure compliance with safety regulations and company policies by following proper lockout/tagout procedures, wearing appropriate personal protective equipment (PPE), and adhering to safety protocols during maintenance activities.
• Document maintenance activities, repair logs, equipment histories, and spare parts inventory using computerized maintenance management systems (CMMS) or other digital record-keeping tools.
• Provide training and technical support to operators and maintenance personnel on ASRS operation, troubleshooting techniques, and safety procedures.
• Participate in cross-functional teams for system upgrades, capacity expansion projects, or process improvements related to ASRS operations.
• Shift schedule planning, arrangement, and execution.
• Managing inventory accuracy, stock replenishment, and space utilization within the warehouse or distribution center environment. This role involves coordinating with various teams to ensure timely inventory transactions, cycle counts, and adjustments to maintain optimal inventory levels.

Qualifications:

• High school diploma or equivalent; technical diploma or certification in mechatronics, automation, or related field preferred.
• Proven experience in maintenance and repair of automated material handling systems, such as ASRS, conveyor systems, robotics, or similar equipment.
• Strong mechanical aptitude with knowledge of electrical, electronic, and hydraulic systems.
• Familiarity with PLC programming, HMI interfaces, and industrial control systems (e.g., Siemens, Allen-Bradley) is desirable.
• Ability to read and interpret technical drawings, electrical schematics, and equipment manuals.
• Excellent problem-solving skills and attention to detail in diagnosing complex technical issues.
• Effective communication skills and ability to work independently or as part of a team.
• Willingness to work flexible hours, including weekends or evenings, and respond to emergency calls as needed.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule