Responsibilities

• Able to use primavera 6 and Microsoft project for project scheduling
• Gather pertinent data, perform related calculations and analyse schedule impact, include critical path method (CPM).
• Produce and maintain the good quality work on project schedule, inclusive frequent updating project schedule with physical site progress
• Able develop progress reports, daily, weekly and monthly basis (e.g., overall S-curve, plan vs actual table)
• Proactively engage and communicate with Construction Team on schedule matters for developing quality schedule and updated the status
• Determine project requirements and estimate resources by allocating correct resources such as manpower, materials and equipment.
• Coordinate between interdisciplinary for logical connection among activities.
• Prepare construction schedules, resource and cost loaded with governance of major project milestones stated in the project contract.
• Oversee the master schedule and highlight deviations that critical enough to pay attention to supervisor/project management team.
• Coordinate with Contract Engineer on project progress claims matters.
• Interface with sub-contractors and client’s representative to finalise the baseline schedule.

Requirements

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Environmental/Health/Safety), Logistic/Transportation or equivalent.
• At least 4 year(s) of working experience in the related field is required for this position.

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Oversee process mechanical design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including P&ID, equipment/piping/valve sizing, equipment selection, equipment/piping layout, equipment specification/data sheet, etc
• Provide process mechanical input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of mechanical equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process mechanical submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the mechanical equipment suppliers / subcontractors to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing, commissioning and O&M work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process/mechanical work (design, engineering, installation support, T&C, etc.), ideally for water/wastewater treatment project (including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience.
• Familiarity with international and local standards (e.g., ASME, ANSI, PUB Singapore regulations)
• Familiarity with mechanical equipment used in WWTPs, including such as screens, pumps, mixers, blower, air compressors, tanks, biogas equipment, odour control system, sludge equipment, piping, and valves, etc
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Salary : $3,000 - $4,500

Working hour : 9am to 6pm (Mon to Fri), 9am to 1pm (Alternate Sat)

Location : Admiralty

Job Description:

* Develop detailed electrical system designs specifically for residential buildings and condos, including power distribution, lighting, and electrical layouts for units and shared spaces.

* Coordinate with architects, structural engineers, and interior designers to ensure that electrical plans integrate seamlessly with overall building designs.

* Ensure adherence to local electrical and building codes, focusing on residential construction requirements.

* Implement safety protocols for residential wiring, grounding, and circuit design to protect occupants and prevent hazards.

* Stay updated on the latest energy-saving codes and green building standards that apply to residential developments.

* Supervise electrical installations on-site, coordinating with contractors and ensuring that work is completed accurately and on schedule.

* Oversee inspections, testing, and troubleshooting of installed systems to meet quality standards and avoid post-construction issues.

* Manage budgets, track resources, and optimize the use of materials to meet project timelines and cost constraints.

* Ensure high standards in power distribution for residential buildings, preventing overloads, power surges, and other risks to residents.

Requirements:

* Bachelor’s degree in Electrical Engineering, with coursework or training focused on residential or building electrical systems.

* Min 2 years experience in relevant industry.

* Proficiency in software for electrical design and load calculation, such as AutoCAD, ETAP, or Revit MEP, tailored for residential settings.

* A strong portfolio of completed residential projects, ideally involving high-rise condos or large residential communities, will be advantageous.

* Familiarity with energy-efficient lighting, solar panel installations, and other green energy options is highly beneficial in line with sustainable residential development.

Company Name: Nala Employment Pte Ltd | License No.: 16C8302
Contact Person: Soo Yee Hui
Regisration No.: R24120810

· Coordinate with precast supplier on technical details assistance.

· Checking & submitting shop drawings to QPS/LTA for approval..

· Preparing MSRA for all work activity to be done at site.

· Monitor, planning & supervise setting up of precast storage yard.

· Monitor & supervise erection of gantry cranes at precast yard.

· Preparing the schedule for production based on site's delivery requirement.

· Checking & maintaining quality of PC production.

· Planning and scheduling of site works for PC installation.

· Monitoring storage space for precast deliveries.

· Checking quality of delivered products before installation

· Directed all necessary day to day Site activities.

· Monitoring work progress.

· Administration of all site works.

· Quality analysis and control of works.

.

Responsibilities:

• Supervise design schedule, estimates and drawing updates
• Control of all design & engineering documents
• Review of tolerances and constraints on new products prior to estimation
• Continuous development of cost saving activities
• Allocate and monitor schedules quality and cost for subcontracted design & tooling
• Support the Sales dept on design-related function
• Involve in all tooling designs & pre-sale activities (Prototype & quotation)
• Ensure tooling meet the production requirements
• Make tooling improvement to meet higher productivity

Requirements:

• Degree in Mechanical Engineering or equivalent
• 3-5 years hands on experience in precision metal stamping process/multi-slide forming
• Competent in tool design and conversant with CAD and geometric tolerance
• Meticulous and detail-oriented
• Able to prioritize workload and meet deadlines
• Team-player, self driven and able to work under pressure with a sense of urgency and meet tight deadline

Experience with injection molding, double disc grinding, and machining is an added advantage

Job Responsibilities

• Sales and marketing of valves (Own and well known brand in the industry)Able to secure & generate sales of valves & Actuators to achieve company order targets
• Aggressive PIC for Sales Division who can develop new business(sales) from scratch & be able to conclude orders.
• Establish relationship with End Users, Contractor (Industrial Market, main Market is semiconductor, & petrochemical related) who use valves, gathering market information and expand sales
• Market survey of new business field and reporting
• Work closely and liaise with related divisions such as Sales Team, Warehouse, Engineering, Factories, Japan head office
• Properly understand the needs from customers and follow upongoing project
• Person in charge to communicate with customers if a claim occurs, and liaise with related divisions to solve the problem
• A highly dedicated, responsible & passionate person who can perform task accurately & promptly, and able to work under pressure by taking challenge.
• Ad-hoc duties by MD or GM.

Requirements

• Minimum 2 years’ experience related valves, actuators & similar industry in sales including planning sales approach
• Proactive attitude to analyze the current situation and change to better way
• Depending on the performance, this position could be the future Senior Manager
• Proactive attitude to hit the target and logical way of thinking, and to develop new business and sales channel
• Confident in communication
• General Skill in Excel, Word and Power Point
• Team Player
• Ownership
• Decisive, drive and ability to deliver effective, innovative solutions
• A person who has positive and can think and act for himself (most important)
• A person who can act flexibly for sudden related work
• A person who can keep confidentiality
• Good people management skills with excellent communication andinterpersonal skills at all levels
• Some understanding of Japanese is a plus.

Reporting Function

• Directly report to Sales General Manager

Roles & Responsibilities

Job Description

• Industry/ Organization Type: Marine Shipbuilding and repairs
• Position Title: Mechanical Engineer
• Working Location: Jurong West
• Working Hours: 6 days (Monday to Friday (8 AM - 6 PM) Sat 9am -1230pm
• Salary Package: Basic Salary up to $8,500 + OT + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Focus on equipment repairs, hands-on assembly, testing, troubleshooting, and supporting projects related to Scrubber systems and valves
• Assess the client's needs to understand design requirements.
• Use CAD software to create design drafts (such as P&ID and GA drawings).
• List necessary materials, compare with current stock, and manage inventory reports for project implementation.
• Keep track of the project's progress to ensure it aligns with the planned timeline.
• Test, diagnose issues with, and fix equipment or products manually.
• Manage the submission of documents to clients.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or a relevant advanced qualification.
• Minimum 1-2 years of mechanical engineering experience in the marine/mechanical industry.
• Skilled in using AutoCAD for drafting and competent with Microsoft Office.
• Hands-on technical skills are an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at) [email protected] Kindly indicate #me on the email subject.

Zantra Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Job Responsibilities:

· Assist Project Manager to supervise project(s) comprising design, purchasing, quality control, production, and commercial.

· Coordinating drawings approval between classification, designer, and third parties

· Recommend, review & approved design specific cation

· Responsible for the execution of works control as per the project schedule that is planned by the Project Manager or himself

· Clients facing from start to end of the project be it site inspection/feasibility/visits, operational requirements such as solar system design and execution

· Vendors management to ensure project on schedule

· Provide inputs on accomplished schedules, manpower, machinery, and equipment status to the Project Manager as well as project progress reports

· Costs benefits analysis on proposed projects designs and suggesting cost reduction analysis for solar systems

· Administrative files and documentation where applicable

Job Requirements:

· Diploma/Degree in mechanical/structural/civil/related engineering discipline/renewable energy

· Min. 2 years of relevant experience in the similar industry/fields handling HDB related projects/renewable energy/solar photovoltaic

· Excellent communications and interpersonal skills to convey technical concepts clearly & effectively

· Effectively bilingual to liaise with non-English speaking clients

· Proactive, energetic, adaptable, analytical &problem-solving abilities

• Provide engineering support to various telecommunication equipment installations, testing, patching, and migration.
• Responsible for Outside Plant Cable Networks implementation such as RF cable, structured cable, Fiber optic cable installation, and testing.
• Responsible for fixing and troubleshooting ADSL Modem, CISCO Routers, and wireless APsPerf
• Perform fault diagnosis, analysis & rectification of LAN, WAN, and Telephone issues
• Perform site acquisition, site survey, acceptance test plan(ATP), and network planning of new sites to roll out and reconfiguration of sites
• Provide engineering support activities either remotely, or on-site.
• Rotational 24x7 standby duties required

• Able to plan/coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at the site and recommend solutions to relevant teams/departments.
• Review Architectural drawings for conflicts with Structural/M&E and liaise with consultants to resolve issues.
• Ensure all work is carried out within the schedule and maintain the required quality.
• Ensure a safe work environment at the work site and manage workers.
• Assist the Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submitting and monitoring technical drawings, method of statements, and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.

Job description

• Proactively engaging with customers on service sales and technical inquiries to support the sales team in meeting sales growth objectives and nurturing positive client relationships.
• Provides technical support during site installation, troubleshooting and testing & commissioning.
• Deliver in-house (phone/email) and on-site service support, as well as conduct demonstrations for potential customers.
• Provides technical support throughout site installation, troubleshooting, testing, and commissioning, including diagnosing issues, providing quotations, and processing purchase orders.
• Source and fabricate troubleshooting tools, as well as manage the ordering process to ensure spare parts availability and reordering when necessary.
• Prepare documentation for repair cases as required and assist with payment issues related to repair orders.
• Enhance service revenue and expedite repair process turnaround time (TAT), while also managing warranty claims for both local and overseas customers.
• Keep the repair/workshop area tidy and orderly, ensuring that demo equipment remains in operational condition.
• Perform any other duties as assigned from time to time.

Requirements :

• Minimum a Higher NITEC qualifications.
• Preferably with at least 3 years of commercial experience in the Electrical/ Electronic industry. Fresh graduates are welcome too.
• Good understanding of Standard Electrical Schematic Diagrams, and able to perform System, Hardware Testing & Troubleshooting.
• Knowledge and practical use of standard vacuum technology practices is an advantage.
• Service-minded with passion and patience for handling customers.

Roles & Responsibilities

• Prepare final reports for Incoming, In-process and outgoing processes.
• Compile and ensure timely submission of Manufacturing Record Book (MRB).
• Verify external provider's documented information (Incoming or secondary processes).
• Investigate and prepare non-conformance reports.
• Implement and verify corrective actions and ensure compliance with requirements.
• Present NCR findings to Management and customer.
• Liaise with customers on Notification of Inspection schedule and Pre-production meeting.
• Conduct internal training and process improvement plan.
• Involve in quality audits (Internal or External).
• Assist QA Manager on all issues.
• Any ad-hoc tasks which may be assigned.

Requirements

• Diploma or Degree in Engineering. Preferably Mechanical.
• 3 years of working experience in oil and gas industry.
• Familiar with international codes and standards (ASME/ASTM/API).
• Understanding and interpretation of drawing.
• Knowledge in Welding, NDE, CMM and manual inspection will be added advantage.
• Fresh graduates are welcome to apply. Training will be provided.

• Designing and developing electrical systems for marine vessels
• ⁠Installing and commissioning electrical systems on ships
• Supervising the work of marine engine technicians
• Inspecting and testing electrical systems and equipment
• Maintaining and repairing electrical systems and equipment
• Designing tray routes and electrical panel positions
• Creating single-line diagrams of lighting and other electrical panels
• ⁠Supervising the installation, cabling, and termination of electrical equipment
• Independently testing and commissioning electrical panels
• ⁠Loading testing D.G. sets
• Presenting surveys of electrical systems to relevant authorities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Oversee and mentor staff and liaise with a variety of Clients
• Handle over the resulting structures and services for use
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

PLC/SCADA Project Engineer - European Engineering MNC

2 years contract

Salary: $5500 max

5 days work week

8am - 5pm

Location: Tuas

Job Scope:

• Reporting to lead engineer and project manager.
• Directly involves in the Technical meeting with customer, analyze customer inputs and understand the requirements, such as Technical Specification, IO list, etc.
• Raise Technical Queries and clarification to customer.
• Develop drawing/documentation as required for the project; and work together with lead engineer for document submission.
• Together with lead engineer to design and develop 800xA Object Library.
• Develop test plan and procedures.
• In the absence of lead engineer, able to take the leadership and ownership.

Job Scope

• Involved in planning and development of projects.
• Assist to develop mechanical and/or electrical engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Assist to design mechanical and electrical systems.
• Assist to conduct project assessments and is able to suggest feasible and creative solutions based on the assessment results.
• Support tendering process.
• Assist to plan the team's manpower and provides on-the-job guidance to junior staffs

Requirements

• Degree in Mechanical or Electrical Engineering or related fields
• Meticulous and highly detail-oriented.
• Has a keen interest to incorporate new technologies into engineering design projects.
• Excellent knowledge in mechanical and/or electrical engineering fields
• Good problem-solving skills.
• Good interpersonal and project coordination skills crucial for networking with internal and external stakeholders.
• Required to work both in office and at project sites.
• Applicants with good experiences will be considered for Senior positions

Responsibilities:

• Acquisition and Implementation
• Advise and support corporate demand management in the acquisition and implementation of new services in regards to the IT landscape. Identify and evaluate potential solutions, ensure that requirements are met during development and support the implementation of IT
• Lifecycle Management
• Advise management on required upgrades of service components to guarantee continued support and required capacity to handle the expected load and volume of changes to keep the service aligned with changing business needs
• Service Coordination/product management
• Identify opportunities for service improvement. Acts as internal coordinator for the execution of service improvement plans
• Requirement specifications
• Formulate IT solutions/service requirements
• Architecture and design
• Contribute to enterprise architecture, start architectures and design or development of new services concerning the IT landscape. Contribute to standardisation and development of technical building blocks
• Development (coordination)
• Development of new and change of existing IT landscape (including coordination of 3rd party, and own development)
• Acceptance testing
• Ensure operational continuity and quality of deliverables of external suppliers through testing. Plan, organise and perform the functional acceptance test of new releases, including functional integration testing. Facilitate user acceptance testing of new releases by the business
• 2nd & 3rd level support
• Provide 2nd or 3rd level support on incidents and act as problem manager or SME for problems

Requirements:

• At least 5 years of experience in virtual or (hybrid) cloud environments
• A minimum BSc in Information Technology or a related field
• Microsoft Certified Systems Engineer or equivalent education and experience
• A passion for continuous improvement and preventive controls to minimize disruptions
• Eagerness to explore new technologies and implement innovative solutions
• Experience working in a global IT team
• Excellent verbal and written communication skills in English

Responsibilities:

• Apply engineering principles and techniques to perform equipment engineering
• Carry-out mechanical maintenance and basic electrical troubleshooting and repair of workshop machinery
• Ensuring repairs, installations and preventive maintenance on equipment are completed on-time and safely
• Implement network solutions for equipment capability monitoring
• Able to interpret electrical, pneumatic and hydraulic diagrams for troubleshooting purposes
• Maintain proper safekeeping of maintenance tools and equipment
• Carry out safety inspection at workplace and follow safety procedures
• Perform any other duties as assigned by his Immediate Supervisors

Requirements:

· Minimum 5 years experience in equipment engineering and CNC maintenance works

· Experienced in dismantling and assembling of machines

Responsibilities:

• Designing, manufacturing, and installing components that fulfil requirements
• Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement)
• Analysing problems or deficiencies and developing solutions to resolve them
• Conducting experiments and evaluations to improve and innovate product designs
• Creating plans and designs using CAD technology
• Evaluates final product’s overall performance, reliability and safety
• Estimating budgets and time scopes for each project
• Writing technical documentation for machine operators
• Ensuring that products meet compliance regulations
• Collaborating with project managers and other engineers in our team
• Liaison with vendors on finalization of modules
• Responsible for mechanical documentation

Requirements:

• Candidates must possess at least Bachelor’s Degree in Engineering (Mechanical/Mechatronics)
• Experience working in the mechanical engineering field
• Superior computer skills, with solid experience in CAD, CAM, and Matlab/LabView programs
• Ability to run simulations and analyse test data
• Ability to write clear and comprehensive technical documentation
• Highly analytical mind, with exceptional problem-solving skills and attention to detail
• About 2 years field technical experience in Semiconductor environment. Other industrial with good equipment knowledge is welcome
• Experience in troubleshooting of PC base fully automatic equipment in semiconductor and other industrial
• Good knowledge on equipment control and troubleshooting method/skill.
• Good knowledge in die bonder application and process will be an advantage.

Job Benefits:

• 5 days work week
• Group Medical Insurance
• Only shortlisted candidates will be notified
• Starting salary depending on experience

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 8 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus