Our client is a distributor of automotive and industrial solutions.

• Manage and configure infrastructure systems and applications, network devices, desktops, mobile devices, and remote devices.
• Ensure automatic system backups, successful execution of recovery and disaster recovery plans, application of patches, and closely monitor system resource usage.
• Collaborate with external vendors to ensure compliance with Service Level Agreements (SLA).
• Research and source products, solutions, and vendors for ongoing projects.

Requirements:

• Diploma in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant working experience.
• Skilled in enterprise networking, with expertise in WAN, LAN, and VPN optimization, implementation, and support.
• Knowledgeable about Alcatel PABX, FortiGate devices, Cisco Systems, and Unifi Wireless AP Controllers.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 2 years hands-on experience in leading edge film deposition/CVD deposition/implant technology work.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Job Description

The successful candidate will be part of the Cloud & Platforms team.

He/She will be responsible for the following:

• Deep exposure to on-premises Linux and/or Windows administration on VMWare including SAN and storage solutions.

• Perform system administration and troubleshooting activities (including outside normal business hours) in accordance with company policies and procedures.

• Create and maintain documentation, and processes.

• Provide a focus on automation and Infrastructure-as-Code (IaC) to improve agility using tools such as Ansible, Python, and Terraform.

• Support audit and infrastructure/network security scans, disaster recovery and security related drills.

• Explore, learn and deploy new technologies that will help the company to reduce cost or improve operational efficiencies.

Requirements

• Possess a degree in Information Technology or related fields.

• Minimum of 5 years of IT experience with at least 3 years of hands-on experience in a similar role.

• Experience managing both Unix (Linux and/or AIX) and Windows servers. Expert level (e.g. certified) in one at least one: covering installation, configuration, security, networking, storage, patching, hardening etc.

• Experience working in VMWare environments.

• Practical experience administering SAN and related storage technologies.

• Experience with Python/Ansible scripting skills for provisioning and automating dynamic infrastructure.

• Demonstrate strong knowledge in infrastructure areas such as virtual server technologies, storage, networking, internet protocols, operating systems, scripting & monitoring tools and IT Security.

• Experience in Agile methodologies, DevOps, CI/CD and related tools preferred.

• Strong analytical, project management, communications, and interpersonal skills.

view more jobs : www.blueboxjobs.com

The detail plans as described above are as follows:

Yearly renewable contract. Jurong Island

• Execution formation with the direction by COMPANY’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with COMPANY’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the COMPANY’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Be Part of Our Success

· Carry out maintenance works (servicing, repair, overhaul) on customers' operational systems.

· Perform troubleshooting and corrective maintenance work safely.

· Supervise sub-contractors to ensure high quality of work and compliance with safety work procedures.

· 24/7 standby for maintenance support when rostered.

· Other duties as assigned by Department Manager and SDM.

Qualities We Value

· Individuals with deep experience in generator, cooling and hydraulic systems maintenance may apply.

· Basic knowledge in computer networking or IT systems an advantage.

· Team player.

· Able to work independently.

· Able to work under pressure with good time management skills.

· Good written and verbal communication.

· Good interpersonal skills (interaction with customers at site will be required).

· Knowledge of SAP system an advantage.

· Singaporean only

· Working Location: Sembawang (may be deployed to other camp sites)

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Job Description

1) Supervise the work of sub-contractors and work closely with other site operations staff to meet the project schedule.
2) Ensure that works are executed in accordance to specifications.
3) Coordinate with all M&E subcontractors to resolve all technical problems in order to achieve the desired overall project objective.
4) Work together with other project team members to coordinate/resolve technical issues.
5) Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Requirement

1) Minimum 3 years of experience as M&E Engineer in construction related field
2) Diploma/Degree in Mechanical or Electrical Engineering or degree in relevant subject.

Job Description

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors, SWCs, etc for all Works within the Railway Protection Zone

Requirements

• Minimum 8 years experience in the construction of civil and structure projects or related field ;
• Degree in Civil Engineering recognised by the PE Board and is registered as Resident Engineer with Institution of Engineers Singapore ;

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Good communication skills

Company Overview

Our client is a globally recognized leader in the elevator and escalator industry, specializing in innovative and sustainable mobility solutions. With a strong presence in over 100 countries, the company is committed to delivering high-quality products and services to enhance urban mobility. Known for its cutting-edge technology, the company serves diverse sectors, including residential, commercial, and infrastructure projects, while maintaining a focus on safety, efficiency, and customer satisfaction.

Job Responsibilities

• Oversee the full project lifecycle, from planning to execution, ensuring timely delivery and alignment with project goals.
• Review project proposals and plans to define timelines, budget limitations, staffing requirements, and procedures to meet deadlines and financial targets.
• Coordinate and participate in pre- and post-tender surveys to ensure project readiness and compliance.
• Provide detailed project updates and reports during Work-in-Progress (WIP) reviews for management.
• Lead and manage the project team, ensuring effective collaboration and task execution.
• Attend monthly WIP meetings with key stakeholders, including the Commercial team and Finance Controller, to review progress and address challenges.
• Monitor and manage project costs, identifying potential overruns and mitigating risks of delays proactively.
• Champion safety standards by conducting regular quality checks, safety walks, and inspections, fostering a culture of safety and compliance.

Requirements

• Minimum 4 to 5 years of experience in project management, preferably in the elevator and escalator industry / construction or related field
• Minimum Diploma in Mechanical, Electrical, or Electronics Engineering, or in Project Management, or equivalent qualifications.
• A solid understanding of marketing principles and market demands within the elevator industry.

Salary commensurates based on experience.

To apply online please use the 'apply' function, and attach your updated resume.

(EA: 94C3609/R1442042)

Job Description

• Industry/ Organization Type: Engineering Consultancy
• Position Title: Mechanical Engineer/ Mechanical & Electrical Engineer
• Working Location: Paya Lebar
• Working Hours: 5 days (Mon to Fri: 8:30am - 6.00pm)
• Salary Package: Basic + Transport Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Design and implement mechanical and electrical systems in building projects.
• Ensure compliance with all building regulations and standards specific to Singapore.
• Manage multiple building projects, ensuring adherence to outlined specifications and timelines.
• Collaborate with other engineering professionals to optimize design processes.
• Conduct thorough testing and evaluation of mechanical and electrical systems to ensure efficiency and safety.
• Provide detailed project reports and documentations for management review.
• Troubleshoot issues that arise during the project lifecycle and propose effective resolutions.
• Stay updated with the latest industry trends, technologies, and regulations
• Other ad-hoc duties which may be assigned.

APPLY NOW!!!

• Bachelor’s degree in Electrical or Mechanical Engineering, or a related field.
• Proven experience and knowledge in building services design and installation.
• Familiarity with building regulations and standards in Singapore.
• Demonstrated expertise in building project management.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72297 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for AI Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design, build, and optimize machine learning models and algorithms to solve specific business problems.
• Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance using techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Perform exploratory data analysis, generate insights, and present findings to stakeholders, using statistical methods and visualization techniques.

Requirements:

• Education qualification in Computer Science, Data Science, Machine Learning or relevant field
• At least 4 - 5 years' work experience in designing, developing, and deploying machine learning models in real-world applications
• Knowledge of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn)

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Role:Desktop Support Engineer

Install, upgrade, support and troubleshoot mobile /smart devices
• Good communication and problem-solving skills
• Excellent interpersonal skills
• Dedicated as well as hard working individual with the intercommunication skills to work at all the level of organization.
• Helpful and well-mannered
• Working tirelessly to enable the growth and development of organization that is customer centric and outward-looking.
a. Knowledge in basic trouble shooting of mobile/smart devices (Primary Requirement)
b. Knowledge in WOG, Legacy and application accounts based on monthly basis
c. Basic Desktop trouble shooting skills
d. Imaging and OS instalation knowldge.
e. Knowledge in MS excel"


Must have Talent / Skills
Good communication and excellent interpersonal skills, Proficient in Microsoft Office applications

Good to have Talent / Skills
ITIL Process Knowledge

Duties and Responsibilities
With reference to the Service Lead in AGRAMKOW Asia Pacific, you will be responsible for incoming customer requests, while showcasing your specialization within the technical field. You secure urgent support, maintenance advice and breakdown repairs when needed and work independently as well as collaboratively with your world-wide colleagues.

Your open-minded and helpful approach shines, especially during on-site customer visits, where you support and advise customers in any matter regarding maintenance of equipment, installation, or commissioning of machinery.

Skills and Experience

The right candidate for the job should be equipped with a relevant technical education, such as a degree in Electronics / Electrical / Mechatronics Engineering or similar.

In addition, the following will be required:

• A minimum of 2-3 years' experience in an industrial or automation-based project environment.
• Technically trained with ability to understand PI diagram, E-plan and mechanical drawings is a must.
• Practical electrical knowledge with ability to install equipment/instrument independently.
• Familiar with IoT4.0 concepts and IIOT implementation is a plus.
• Pre-sales experience preferred.
• Experience of the HVAC industry would be desirable, but not essential.
• Strong interpersonal and communicative skills.
• Team player with collaboration with people of all levels both within and outside of the company.
• Fluent communication skill in spoken and written English is essential. Proficient level of mandarin is an advantage.

The position is based in Singapore, and you will be supporting customers mainly within the Asia Pacific Region. Comprehensive, thorough training and needed education will be provided in Singapore and at our head office in Denmark.

What We Offer
We offer an exciting workplace, within a fast-growing industry, where we honor a positive mindset and find high collaboration as a natural part of the day. We foster a culture that values individual well-being and encourages a healthy work-life-balance. We support each other and embraces creativity. We offer opportunities for personal growth and professional development, that not only values your contributions, but also invests in your continuous development, making work an enjoyable journey.

We invite candidates for interview on an ongoing basis and close the position once we have found the right Candidate for the job.

AGRAMKOW

For more than four decades, AGRAMKOW has served manufacturers of refrigerators, freezers, and air-conditioning units all over the world. Based on our vast experience we provide reliable, high-quality, end-of-line solutions to help our customers establish a key edge in fiercely competitive markets.

From individual charging, evacuation, and testing stations to complete production line information systems that integrate operating data. Our customers count on AGRAMKOW to pave the way to data-driven production resulting in continuous quality and productivity improvements and better-informed decision-making.

At the heart of the AGRAMKOW's way of working our vision, is to be the most admired company in our industry for our applications expertise, partnership, productivity technologies and SMART solutions.

We are working across the globe, building partnerships to improve quality-based performance for customers. We provide local support wherever our products are installed, and have support centers in Asia, Europe and Latin America. In addition, we have an extensive network of alliance partners worldwide.

Always in the vanguard of new performance technologies, AGRAMKOW has continually pioneered within new solutions in response to the rapidly changing needs of the consumers within commercial appliance and air conditioning industries.

We are looking to hire an IT Engineer to manage our company’s computer systems as well as managing POC deployments and demos to clients. As an IT Engineer, you will be responsible for hardware configurations, installing/upgrading software, managing network systems, system integration and training staff on correct operating procedures.

The Responsibilities:

For this role, the IT Engineer will be involved in IT matters for both internal and external stakeholders.

There will be frequent travels from sites to sites. You will be responsible for maintaining, operating, troubleshooting, and integrating systems. You will be responsible for setting up and testing IT-AV systems in various locations. You will be expected to support/work with our AV Engineers / Project Managers to assist in the diagnosis and rectification of faults to ensure that all systems are fully functional, and that equipment and system downtime are kept to a minimum.

The IT Engineer will provide onsite event supporting alongside manufacturers. The IT Engineer will also be expected to provide UC/IT related advice to clients when required.

From time to time, the IT will need to complete questionnaires, audit surveys (ISO, J-Sox) and supporting documents for audits relating to IT, not limited to our IT infrastructure and our processes.

The IT Engineer is also required to manage our IT assets including but not limited to: recommendation, purchasing, deployment and refreshment. You will be involved in the new hire onboarding and offboarding. You also expected to develop or improve on current IT processes from time to time.

The Pre-Requisites:

• Minimum diploma in Computer Science or Information Technology
• Proven work experience as Desktop Support Engineer or Support Technician.
• Knowledge of IP networking and security, Router, Switch, Firewall, and VPN
• Understanding of network fundamentals such as multicasting/unicasting data transmission
• Excellent analytical, interpersonal and communication skills
• Knowledge with Zoom, Teams & O365 administration and operation
• Knowledge of popular operating systems, software applications, and remote connection systems.
• Ability to travel and work after hours when necessary
• Excellent interpersonal skills
• Good written and verbal communication skills
• Ability to effectively handle stressful situations
• Good customer service
• O365 Certifications will be a plus point
• CCNA Certifications will be a plus point
• ITIL Certifications will be a plus point

• Proven experience in DevSecOps role.

• Extensive experience with security scans, vulnerability remediation, and patch implementation.

• Strong expertise in Kubernetes and container orchestration.

• Proficiency in managing containerized applications using Docker.

• Hands-on experience with GitHub and CI/CD pipeline implementations.

• Deep understanding of Azure cloud services and infrastructure management.

• Strong scripting skills in languages such as Bash, Python, or PowerShell.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

Role:NOC Engineer L1

JD:

Proficiency in monitoring and managing network systems, servers, and infrastructure.
Knowledge of network protocols (TCP/IP, DNS, DHCP, etc.) and tools (e.g., SolarWinds, Nagios, or PRTG).
Familiarity with cloud platforms (AWS, Azure, GCP) and virtualization technologies (VMware, Hyper-V).
Understanding of ITIL processes for incident, problem, and change management."

Must have Talent / Skills

"High attention to detail and proactive mindset.
Ability to work under pressure during critical incidents.
Strong organizational skills for managing multiple tasks simultaneously."

Job Role/Level Senior Systems Engineer/Level 3

Skillset Category Common

Mandatory Skills CCTV knowledge, general system solutioning (network, system, infra, applications), project planning and execution, project cost management, management of contractors/juniors

Preferred Skills Construction site safety, issue troubleshooting, mechanical and civil works knowledge, proposal writing, documentation, efforts and costs estimation

Brief Job Description The ideal candidate should possess:

• Bachelor’s degree in computer science, Engineering, Information Technology, Electrical / Electronic, Information Systems or equivalent discipline

• 5 - 10 years of relevant experience in security surveillance hardware and software administration, configuration, network design, and troubleshooting

Roles & Responsibilities: 

 Work with system architect and pre-sales team to implement security surveillance systems and network infrastructure solutions in-premise and able to articulate and document the solution.

 Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system

 Good knowledge and hands on experience working with software and hardware systems in the area of:

• IP CCTV System

• Fence Intrusion Detection System (FIDS)

• Physical Security Information Management System (PSIM)

• Video Management System (VMS)

• Data Protection

• Identify and Access Management

• Windows Server OS, Linux OS in a virtual environment

• Virtualisation and Hypervisors

• Network Monitoring

 Work, liaise and lead inter-disciplinary technical team and stakeholders to design, implement and verify solutions to meet project requirements for performance.

 Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance

 Develop technical implementation timeline with critical path that complements project management schedule.

 Collaborate with respective key vendors/partners to design and review the proposed solution architecture in accordance with standards and policies.

 Understands technical documentation, installation manuals, system drawings and able to orientate construction drawing, floor plan, etc.

 Ensure the project User Acceptance Tests are conducted successfully accordance to requirements

 Proficient in electrical power and good knowledge on power cabling works for on-site works

 Attend customers meetings, report regularly on progress and monitor project progress

 Liaise with customers/consultants/project managers concerning approval of designs, reviews, progress of work, problem solving, etc.

 Determine and define clear deliverables, roles and responsibilities of technical engineers in a project to ensure all are actively working toward established milestones and ensuring work complete on time on schedule.

 Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement

 Conduct Root Cause Analysis of system issue and failures and recommend solutions.

 With knowledge on construction site safety and regulatory requirements

 Understanding of financial reporting, budget tracking, and project cost management

 Attain key certifications for partnership with key vendors

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Responsibilities:

• Coordinating, planning and conducting the project plan
• Project formulation and monitoring progress and schedule
• Effective communication and co-ordination between project participants
• Attend site meeting, inspect, monitor and report project progress.
• Submit and update monthly project status
• Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

• Degree in Civil/Structural Engineering or its equivalent
• At least 3 years relevant working experience as Project Engineer in main contractor office
• Proficient in MS Office Word, Excel and Project Scheduling software
• Good communication skills

Roles & Responsibilities:

• Able to troubleshoot and rectify the problem on-site.

• Provide technical knowledge and ensure the successful completion of scheduled activities.

• Handle and manage technical issues.

• Perform site analysis.

• Perform various tests to comply with regulatory requirements.

• Service and Maintenance of CCTV, Card Access, Public Address, and Turnstile system, Granty system

• Ensure that a high level of professionalism and customer service is maintained at all times.

• Other ad-hoc duties assigned.

Requirement:

• Min. 4 to 6 years of relevant working experience in CCTV, Card Access, Public Address & Turnstile system configuration, installation, and maintenance.

Able to read and speak English

• Experience working on reasonably large, high-availability software systems that have operated at scale.
• Experience in modern full-stack web application technologies; experience in modern front-end engineering on Next.Js/React.js and Java/TypeScript on the backend is preferred.
• Have a strong sense of what it means to be a technical leader, particularly as it relates to the suite of soft skills beyond just your technical chops.
• Passion towards engineering excellence; you deeply understand that software engineering is a team sport, and you take pride in the craftsmanship aspect of software engineering.
• Passion towards working for public good with interest.
• Interest and experience in coaching and growing junior engineers.

- Designing electrical system

- Ensure designs meet industry standards and regulations

- Knowledge of design techniques

- Prepare technical documentation and reports

- Responsible for producing schematic drawings

- Proficiency in electrical design software (e.g., AutoCAD, Solidwork)

- Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.

- Assist and collaborate with other project team members to comply with project requirements and meet project schedules

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a EQUIPMENT ENGINEER to be paart of our ETCH DEPARTMENTdiverse team of talent. You will be responsible for equipment preventive maintenance and equipment performance indices.

What you will be working on:

• Establish systems/guidance in sustaining and improving all equipment performance indices to meet operations goals.
• Perform shift duties to support the running of Production in the Module and ensure equipment readiness and worthiness for production when requested.
• Perform scheduled equipment preventive maintenance (PM), calibration and troubleshoot equipment-related problems on a timely basis to minimize equipment downtime.
• Conduct installation and hook-up of new equipment.
• Perform task with zero error.
• Establish work procedures, corrective actions and preventions
• Oversee the preparation of consumables/preventive maintenance parts to ensure adequate provision.
• Participate in continuous improvement programs to improve productivity and output quality of the Module, and constantly monitor and feedback to the team to improve performance of equipment to meet Module objectives.
• Assist in implementing and managing process improvement projects.
• Ensure good housekeeping and safety practices in the Fab.
• Safe custody of tools, equipment and other properties belonging to the Module.
• Initiate, organize, develop and lead task-force for short term problem solving and long term continuous improvement.

More About You:

• Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics or equivalent
• 2-5 years semiconductor wafer fab experience as an Equipment Engineer
• Engineering knowledge, which may include semiconductor devices theory, electronics, electrical/ pneumatic/ hydraulic control system, digital principle, wafer fabrication processes, pump and vacuum system and electrical wiring system
• Familiar with TEL Unity DRM/ ME+ Platform and Dry Strippers
• Good Team Player
• Good Analytical & Problem-Solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities:-

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Responsible for designing and detailing of Civil and Structural Engineering works to ensuring that the Structure sections of the works are constructed in accordance with the contract requirements
• Responsible for timely submission of reports and completion of projects for tender/submission with target dates
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Manage projects to meet the time, cost and quality objectives
• Liaise with consultants, contractors and authorities from inception to completion of projects
• Supervise the structural works of sub-contractors and work closely with site operations staff to meet the project schedule.
• Coordinate and monitor work progress at site including periodical site
• Responsible for all inspection activities and attending meetings during course of construction of projects being carried out
• Monitor site safety and liaise with the Safety Engineer

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years HDB experience in Building Engineering main-con companies
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Able to work independently and a team player
• Good analytical, supervision, and communication skills