We are looking for a Hardware Senior Engineer to make a difference!

What will you do?

Drive further development of PLC / programmable controller offer within the scope of product maintenance (analogue and digital circuit technology as well as power electronic circuit components)

• · Preparation and provision of data as a basis for the decision of the Board of change committee (BoC) regarding technical feasibility, risks and an effort estimation
• · Fault analysis on electrical assemblies
• · Selection of suitable replacement parts for obsolete or no available electronic components
• · Circuit diagram creation/modification with ECAD tools
• · Definition of procedures and test descriptions or definition of acceptance criteria for verification tests
• · Specify, plan, carry out and document test and verification at component, function and device level
• · Internal communication/ coordination with mechanical design, PCB layout, quality department, purchasing and industrialization
• · Creation or updating of development documentation
• · Participation in national and international project and team meetings

What qualifications will make you successful?

• · Bachelor degree in Electrical, Electronic Engineering.
• · 5 years of experience in Hardware Design.
• · Deep knowledge in digital Electronic Design including highspeed constraints
• · Knowledge and experience in Cadence, Allegro
• · Analytical approach to identifying the causes of errors
• · Customer oriented and business focused

We are looking for “Senior Firmware Engineer” for developing our next generation communication modules and Input/output modules for industrial automation applications. You will be involved in the entire product development life cycle activities from defining the functional specification, design and implementation till release. You will be required to consistently meet project deliverables with high quality and work in a diverse team environment across the globe.

Requirements

• · Bachelor or Master’s degree in Computer Science/Electronics Engineering with minimum 8-10 years of experience in embedded software development
• · Demonstrated experience in development of PLCs and/or Bus Couplers and/or IO modules for industrial automation applications
• · Should have delivered at least 3 products from inception to release with quality
• · Hands-on experience in developing prototype and design validation techniques
• · Demonstrated programming experience with C and/or C++
• · Experience in developing applications on VxWorks
• · Hands-on experience with communication protocols (Modbus, EtherNet/IP, CAN, Serial)
• · Experienced in solving complex system problems with systematic troubleshooting skills
• · Preferred if the candidate has worked on PLC with CoDeSys environment
• · Hands-on with GIT, IAR workbench, Drivers for HW peripherals and secure coding
• · Highly motivated and able to start contributing towards deliverables within a short notice

A Construction Company in Woodlands have vacancy for Building Construction Engineer

Job Scope

· Quality control and inspection

· Prepare and submit weekly and monthly site progress report to management

· Prepare method statement

· Safety regulations

· Meeting with clients

· Supervising your Construction Team

· Controlling Materials Order and Usage

· Improving Company's Work Quality

· All other necessary works

· Attend Site Survey and prepare site drawings

· Coordinate with officers, main cons, clients etc

· Attend kick off meeting

Criteria

· At least 2 years working experience in air-conditioning & mechanical ventilation system

· Able to work independently and work as a project team

· Able to carry out prescribed work in a safe, competent or compliant matter.

· Minimum diploma or Mechanical Engineering

· Possession of outstanding written and verbal communication skills, as well as having strong interpersonal skills

· Self-motivated individual, with phenomenal confidence working with diverse partner groups

· Able to perform using AutoCad and other drawing applications

· Good team player and handle stress and deadlines.

· Candidates with more experience may be considered for more senior positions.

· We offer attractive remuneration package to the right candidate.

· Interested candidates are invited to submit detailed resume stating:-

· Current salary;

· Expected salary;

· Reasons of leaving and

· Date of availability.

Benefits

· High Potential of growth

· Medical and dental coverage

· Year end remuneration benefits

We regret that only shortlisted candidates will be notified.

Our Client:

Our client is an established Manufacturing company, headquartered in Japan. They are currently looking for an energetic Sales Executive/ Sales Engineer to join their growing team in Singapore.

The Responsibilities:

• Maintain organized sales records and report month-end goal-setting to the senior management team
• Support management by completing orders and keeping customers informed of delays and delivery dates
• Coordinating the sales team by managing schedules, filing important documents, and communicating relevant information
• Ensuring the adequacy of sales-related equipment or material
• Responding to complaints from customers and giving after-sales support when requested
• Handle the processing of all orders with accuracy and timeliness
• Establish the planning process for the company by converting the Sales forecast into a feasible manufacturing plan
• Oversee preparation and timely release of raw materials to production to meet production orders. Track usage of raw materials to production
• Prepare monthly reports on the performance of production and highlight issues and bottlenecks that may potentially impact the achievement of the production schedule and customer satisfaction
• Performs time studies to determine how long certain tasks take
• Preparation of various monthly reports for Management (Sale & Purchase Invoice Summary, Sales & Sales Profit Report, Sale by Segment Sale Report, Unit Price Calculation, Bi-yearly Sales Budget Report, etc.)
• Ad hoc duties as assigned by management

The Requirements:

• 2 - 5 years of sales/sales engineer experience in a manufacturing field
• Ability to adapt in the fast-paced working environment
• A team leader & player
• Able to travel, usually to Malaysia, Thailand, Japan, and Shanghai
• Able to converse in Mandarin to communicate with the native Chinese speakers from China office
• Able to converse in Japanese will be an added advantage as you will need to liaise with native Japanese speakers from Japan HQ as well

RGF Privacy Policy – https://www.singapore.rgf-professional.com/privacy-policy

Disclaimer: The Company complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. All qualified applicants will be considered for the position regardless of their age, race, religion, nationality, marital status, or family responsibilities. A more detailed discussion of the TGFEP is available on the Tripartite Alliance for Fair and Progressive Employment Practices (TAFEP) website at https://www.tal.sg/tafep.

JO Reference: 114170

Job Descriptions

1. Plan, execute and supervise all Facilities maintenance related work services.
2. Manage Building / Facilities / M&E works and services for effective and efficient operations facilities performance.
3. Coordinate and supervise the M&E installation and maintenance work if needed.
4. Working closely with the client, sub-contractors, and the facilities team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
5. Assist in planning, controlling and coordinating of mechanical, electrical works.
6. Schedule, monitor and supervise the progress of works .
7. Prepare and follow- up closely on the client inquiries and quotations.
8. Follow the company internal work processes and documentation.
9. Build and maintain good client relationships and uphold high quality standards.

Job Requirements

1. Minimum Diploma or Degree in Engineering or Building / Real Estate/ Facilities Management or any related qualifications.
2. Facilities Maintenance operations background with at least 3 years of experience will be an added advantage.

5.5 days work week.

Who we are

Do you want to join our Geo-data revolution? Fugro’s global reach and unique know-how will put the world at your fingertips. Our love of exploration and technical expertise help us to provide our clients with invaluable insights. We source and make sense of the most relevant Geo-data for their needs, so they can design, build and operate their assets more safely, sustainably and efficiently. But we’re always looking for new talent to take the next step with us. For bright minds who enjoy meaningful work and want to push our pioneering spirit further. For individuals who can take the initiative, but work well within a team.

Job Description

As a Workshop Engineer, the main role will be conducted within an office-based position at Fugro in Singapore office. He will serve as the primary support contact for the mechanical aspects of all mobile / fixed drilling equipment. He will play a pivotal role in the planning and budgeting for preventive maintenance and upgrades which will include liaising between many internal and external departments. Additionally, he will be responsible for supervising routine mechanical tasks carried out by rig mechanics on the ships.

Day-to-day tasks will include:

• Assist with the preparation and planning for the mechanical equipment inspection and testing that will be carried out throughout the year in the workshop facility.
• Assist the equipment resource manager with the planning and implementation of the upgrades relating to equipment including modification works.
• Participate and execute mobilization activities of mechanical equipment, including development of procedures, task plans, as instructed.
• Plan and arrange contractors for repairs & maintenance and assigned activities on the vessel / workshop and to maintain machines, equipment, and tools, as assigned by equipment resource manager.
• Effectively remotely supervise the rig mechanics onboard vessels ensuring that all repair and maintenance including preventive maintenance for offshore drill rigs and geotechnical equipment on the vessels is carried out timely and effectively.
• Carry out periodical inspections of the geotechnical equipment onboard the ships and in Warehouse to ensure running and safety of the plant.
• Identify in advance need of additional support of contractors for critical Mobilisation / Repair activities concerning mechanical equipment such as Winches, Power packs, etc.
• Ensure maintenance records, certification and spare part information of the geotechnical equipment is filed in the planned maintenance system and available for future referral.
• Develop a comprehensive spares package for the Geotech equipment and effectively stock control it during ongoing operations; equipment to be topped and re-ordered when required.
• Ensure that all work performed complies with the requirements of the Project and is carried out in accordance with the rules and the methods of the Company.
• Ensure that all aspects of project Safety, Health & Quality remain prioritised at the work sites.
• Stand in as the emergency point of contact to support the field staff in troubleshooting issues on mechanical and hydraulic equipment.
• Ensure spares & consumables for the geotechnical equipment required on top of vessel standard consumables are defined and updated in STAR PMS onboard Fugro managed / chartered vessels for mechanical equipment.
• Supporting activities and tasks delegated by equipment resource manager in equipment maintenance & reliability audit requirements.

About You
The Workshop Engineer will be a qualified and experienced Mechanical Engineer with a detailed operational and maintenance knowledge of static & rotating mechanical (including high pressure hydraulic & Pneumatic) systems. He would have a minimum 8 years of hands-on experience on servicing hydraulic and mechanical equipment used in Marine & Offshore industry, of which minimum 3 years of experience is working on hydraulic equipment used on offshore facilities such as MODU’s, Rigs. The role is responsible for the day-to-day supervision of the Offshore Geotechnical drilling and Geophysical mechanical equipment’s maintenance. The role supports operational sites (vessels with hydraulic and mechanical equipment) with advice and direction whilst maximising the availability of plant and equipment through maintenance-based planning and organisation.

What we offer

• Competitive salary with Annual Wage Supplement
• Generous paid-leave
• Career & training opportunities (international opportunities possible)
• Company shuttle from various pick-up at MRT stations across Singapore
• Collective health insurance and outpatient benefits;
• Employee Assistance Programme (EAP) to provide help when you need extra support.
• Additional benefits: Long Service Awards, Professional Membership, Weekly fitness-related activities, etc)

**Benefits may vary according to position/contract/grade level.

Our view on diversity, equity and inclusion

At Fugro, our people are our superpower. Their variety of viewpoints, experiences, knowledge and talents give us collective strength. Distinctive beliefs and diverse backgrounds are therefore welcome, but discrimination, harassment, inappropriate behaviour and unfair treatment are not. Everybody is to be well-supported and treated fairly. And everyone must be valued and have their voice heard. Crucially, we believe that getting this right brings a sense of belonging, of safety and acceptance, that makes us feel more connected to Fugro’s purpose ‘together create a safe and liveable world’ – and to each other.

How to apply

• Please include your latest resume in the application.
• Please describe your working rights in Singapore (work pass sponsorship is subject to quota and availability).
• We regret to inform that we will only process applications made via our Careers website (and other linked portals) and only shortlisted applicants will be contacted.

Zenith Infotech (S), a Tech Recruitment firm with 28 years of presence in Singapore, is looking out for Data Platform Engineer to be supporting our client's project.

Canddiate whom are open for 12 months contract to start with, are most welcome to apply here or email to [email protected]

Job Scope :

• Perform operation, installation, and monitoring of big data platforms
• Ensure the reliability and normal operation of multiple core systems for big data and online computing, resolving issues within the agreed SLA
• Evaluate infrastructure requirements for deployments and upgrade activities
• Develop and maintain technical documentations related to design, configuration, troubleshooting, backup, DR, etc
• Ensures deployment and operations of the data platform comply with prevailing security, regulations and audit requirements
• Provide recommendations on data governance practices and in-depth optimizations best practices

Requirements:
• Solid computer software basic knowledge; understand Linux operating system, storage, network IO and other related principles
• Familiar with one or more programming languages, such as Python/Go/Java/Shell/Ansible
• Experience with Cloudera, Informatica, or Denodo and its runtime components would be highly advantageous
• Relevant computing/distributed/big data system experience (Hadoop/HDFS /Kubernetes/Docker/OpenStack/Hadoop/Spark/Flink,etc.) would be advantageous
• Good data structure and system design skills highly preferred
• Good knowledge of information security highly preferred

Job Description:

• Control and manage resources including labour and machinery on site.
• Conduct regular inspections and assess the work performance done by subcontractors.
• Monitor and manage work progress of subcontractors.
• Manage and resolve technical issues.
• Assist in planning and sequencing of the construction operations according to the Project Quality Plan.
• Attend meeting with consultant.

Job Requirements:

• Recognized Degree in Civil Engineering.
• HDB experience preferred.
• Min 5 years of relevant working experience.
• Good computer literacy.
• Self-motivated and able to work independently.

Job scopes

• Perform operation, installation, and monitoring of big data platforms
• Ensure the reliability and normal operation of multiple core systems for big data and online computing, resolving issues within the agreed SLA
• Evaluate infrastructure requirements for deployments and upgrade activities
• Develop and maintain technical documentations related to design, configuration, troubleshooting, backup etc
• Ensures deployment and operations of the data platform comply with prevailing security, regulations and audit requirements
• Provide recommendations on data governance practices and in-depth optimizations best practices

Job requirements

• Bachelor’s degree in computer science or any equivalent
• With 3+ years’ experience in Data Engineering, DevOps and system engineers in Unix
• Solid computer software basic knowledge; understand Linux operating system, storage, network IO and other related principles
• Familiar with one or more programming tech skills, such as Python/Go/Java/Shell/Ansible
• Experience with Cloudera, Informatica, or Denodo and its runtime components
• Relevant computing/distributed/big data system experience (Hadoop/HDFS /Kubernetes/Docker/OpenStack/Hadoop/Spark/Flink,etc.)
• Good data structure and system design skills
• Good knowledge of information security

Thank you for your interest!

We respect your privacy and all communication will be treated with confidentiality. If you wish to know more about this position or explore other roles, please prepare your updated profile and get in touch with our consultant at [email protected]

Cristina Malabuyoc Malijan EA License No. 02C3423 Personnel Registration No. R1111547

Please note that your response to this advertisement and communications with us pursuant to this advertisement will constitute informed consent to the collection, use and/or disclosure of personal data by ManpowerGroup Singapore for the purpose of carrying out its business, in compliance with the relevant provisions of the Personal Data Protection Act 2012. To learn more about ManpowerGroup's Global Privacy Policy, please visit https://www.manpower.com.sg/privacy-policy

Technical Lead (Cloud L2) Role and Responsibilities,

• Overall responsible for managing AWS cloud (70%) and On-perm (30%) infrastructure to ensure high availability and performance.
• Overall responsible for supervising, directing, and coordinating all work related to cloud operations and project.
• Be a Single Point of Contact for client on Operation matters.
• Participate in the regular meeting with customer to update operation status.
• Provide technical guidance and support to team members and client IT teams as needed.
• Monitoring for security threats and responding to security incidents.
• Monitoring cloud and on-perm resource availability, performance, and troubleshooting of issues when required.
• Monitor and troubleshoot issues that impact cloud/on-perm services, including cloud-native network services and cloud-native security services.
• Work closely with cloud engineers, system engineers, database engineers and client IT staff to monitor and troubleshoot systems.
• Automating operation tasks to improve productivity through using tools and scripts to automate repetitive tasks.
• Collaborate with developers and other teams to maintain the cloud services that meet client operation requirements.
• Perform provisioning and configuring of cloud and on-perm resources such as creating and managing virtual machines, storage, and networking resources.
• Deploy, manage, and monitor middleware and applications deployment: This includes deploying of OS patches, applications deployment, and their updates to the cloud.
• Continuous monitoring and performance of resource scaling when demanded.
• Deploy automation to monitoring and scaling cloud resources.
• Securing the cloud environment through adherence to security policies and procedures.
• Perform troubleshooting and resolving cloud and on-perm issues.
• Supporting cloud users. This includes providing support to users of the cloud environment and applications.

Required Skills for OS, Backup and Applications

• Windows Servers 2019
• RedHat Linux 8/9
• Active Directory, LDAP, OWFT
• IIS, SLIF, CrushFTP

Required skill for On-perm,

• VMWare, ESXi, vCenter
• Veritas Netbackup

To Apply:
Please send your latest CV in word file to [email protected]
Kindly indicate your availability, current and expected remuneration package.
We regret that only shortlisted candidates will be notified.

For more job opportunities, please visit our career page: http://quinnox-solutions.com/c...

Quinnox Solutions Pte Ltd (License Number: 06C3126)
Registered EA Personnel (Reg. No.:R1551322)

Objectives of the position:

This role involves Customer Quality Support for our company’s product distribution, addressing customer feedback and product quality requirements/issues. The person in this position will be responsible for handling customer feedback or requirements, such as complaints, test data, and other technical information as requested. This includes necessary communication with all stakeholders (Customer, Supplier, Customer Service, Production Planning, Supplier Management, Logistics).

Knowledge in cable testing or Electrical & Electronic (E&E) product testing, along with an understanding of technical specifications, will be required to comprehend customer complaints (both technical and logistical) and provide appropriate advice for resolution.

Key Responsibilities:

1. Manage Customer Complaint Processes:

• Acknowledge the complaint

• Update the complaint in SAP & Customer complaint log

• Track the complaint & Close the complaint once actions are completed

• Summarize complaints for monthly reporting (LOS & Q-reporting)

• Properly handle customers’ needs by providing accurate and timely information on inquiries related to cable standards, test reports, and complaint handling

2. Track Supplier Quality:

• Conduct incoming inspections when required or prompted by customer complaints

• Update results in the SAP system and release inspected lots according to the defined usage decision

• Generate Supplier Corrective Action Requests (CAR) and track corrective actions by liaising with the supplier

3. Compliance with Standards:

• Familiarize with and comply with international cable testing standards and procedures

• Contribute to achieving company and department KPIs through due diligence, duty of care, and personal accountability for quality assurance in all tasks

4. Liaise with Stakeholders:

• Effectively close customer complaints by liaising with relevant stakeholders

5. Maintain Records:

• Maintain records in SAP and other relevant records

6. Operate Laboratory Test Equipment:

• Operate laboratory test equipment when required for the validation of complaints

7. Assist with Customer Technical Enquiries:

• Assist with product test reports, RoHS, REACH, and CE inquiries

8. General Assistance:

• Assist in other day-to-day activities related to the QA department as assigned by your superior

Skills & Qualification:

• Min. Diploma in Engineering (Electronics / Electrical) or equivalent

• Min. 1 year of experience in electrical / electronic product testing and qualification

• Knowledge in ISO 9001: 2015 QMS standard will be added advantage

• To be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

• Prior experience in SAP system is required for this role.

• Knowledge of cable product testing is an added advantage

• Good customer handling skills and able to communicate to all levels in the organization

• Proficient in Microsoft Words, Excel & Power point

• Addresses present issues immediately and independently

• Possess self-confident and willing to share opinions and expertise in discussions

• Anticipate potential problems and takes action to avoid crisis

• Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am to 5.30pm

About your role

• Collaborate with application engineers and robotics experts to implement robotic software solutions for various industrial applications.
• Assist in configuring robotic systems to meet specific client needs, ensuring optimal performance and functionality.
• Support the integration of robotic hardware, sensors, and software components to create comprehensive industrial automation solutions.
• Participate in the creation of detailed technical documentation, including user manuals, guides, and system specifications.
• Assist in troubleshooting technical issues and providing timely solutions to ensure smooth operation of robotic systems.
• Collaborate with cross-functional teams to gather requirements, provide technical insights, and ensure successful project execution.
• Learn and develop expertise in the company’s proprietary robotic systems and technologies.
• Stay informed about the latest developments in industrial robotics and automation to contribute fresh ideas to projects.
• Adapt and learn quickly to new tools, technologies, and processes as required.

Requirements

• Minimum Bachelor’s degree in Engineering, or a related field.
• Experience: 5+ years in industrial robotics. (Eg. ABB , UR , Fanuc , Kawasaki , Yaskawa)
• Communication Skills: Excellent verbal and written communication.
• Technical Expertise: Hands-on experience with industrial robotic arms (e.g., ABB, UR, Fanuc, Kawasaki, Yaskawa).
• Onsite and Travel: Willingness to work onsite and travel internationally.
• Robotics Knowledge: Understanding of electrical robotic schematic diagrams.
• Project Management: Proven ability in stakeholder project management.
• System Integration: Proficiency in integrating robotic peripherals, sensors, and vision systems.
• Troubleshooting: Experience in diagnosing and resolving robotic system errors and alarms.

Nice to have

• CAD Design: Familiarity with CAD tools for design and modeling.
• End-Effector Design: Knowledge of robotic end-effector development.
• PLC Systems: Experience in Programmable Logic Controller (PLC) systems
• Programming Languages: Coding skills in C#, C++, and Python.

Are you up for the challenging next step in your career? Stolthaven’s corporate Asset Management department is looking for a Lead Corporate Development Engineer.

Stolthaven’s corporate Asset Management department is responsible for developing various new business opportunities in close cooperation with our commercial functions, various experts and local management. These range from greenfield and M&A opportunities in our core business to opportunities in new fields of business or innovation such as energy transition related. The role of business development engineer is a key role in this. As a business development Engineer, you will be supporting with everything technical around business development. These are typically large (class III) projects with capex above 0.5 mln. You will be expected to have an inquisitive mindset and willing to work on various engineering disciplines. This role is not so much focused on what you know, but more on your ability to learn!

In this dynamic role, your responsibilities range from developing conceptual designs, masterplans and other project related documentation during the early stages of a project to evaluating new technology and learning all about new products to be stored or new process at our terminals. Within the local and global Asset Management teams, you will share knowledge & experience on your expertise and act as a true partner for the various stakeholders. You should be business oriented and willing to learn the “bigger picture”, focusing on how technical problems can be solved to support business goals.

As part of the global Asset Management team, you will work in close cooperation with the network of technical specialists and procurement for developing project cost estimates to proposed facilities in consideration of environmental and customer requirements.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Management Director. Typically, business development conceptual engineering and innovation projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate to prepare for initial (board) approvals for new projects
• Assist in Preparing Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• Proactively identifies technical risks in projects and seeks for mitigation
• Providing assistance in the formation of annual capital budget forecasts
• Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, EI&A, Civil or related field

2. Familiarity with applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location is preferred or should be obtained as part of training. This could include API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes

3. Exposure to Multi-disciplinary project teams with various business stakeholders is preferred

4. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

5. Able to communicate with internal and external stakeholders in Portuguese and/or Chinese languages

6. Able to build and maintain both internal and external relations on various levels

7. Able to communicate effectively both verbally and in writing. Especially ability to explain complex technical topics to non-technical stakeholders

8. Proven safety leadership and service mindedness

9. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

10. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

11. Must be computer literate with specific skills in MS Office

12. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

13. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

14. Depending on the required engineering discipline, willing to gain knowledge of the following:

• Mechanical: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation

15. Knowledge and experience with reviewing drawings just as P&ID, E&I drawing and Automation specifications. Knowledge and experience with ACAD and or E-plan drawings

16. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

You will be part of the team that processes and approves the structural plans and calculations of the buildings submitted by Professional Engineers and Accredited Checkers. You are required to perform audit checks on selected structures, conduct construction site checks and take proactive actions to prevent damages to adjacent properties. You are also expected to investigate into complaints on buildings that are dangerous and assess their structural integrity and safety.

1) A degree in civil and structural engineering.

2) At least 3 years of working experience in structural design and analysis of buildings or infrastructures.

3) Ability to work independently and as a team.

4) Strong presentation and reporting skills

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

About the Role:
We are seeking an experienced Senior Data Solutions Engineer with a strong focus on Google Cloud Platform (GCP) to design, implement, and deploy cutting-edge data solutions. You will collaborate with diverse stakeholders, ensuring clarity of requirements and delivering high-quality solutions aligned with business objectives.

Key Responsibilities:

• Design and implement data solutions exclusively on GCP.
• Develop and maintain efficient data access layers using RDBMS and NoSQL technologies.
• Build and deploy Big Data applications leveraging GCP Big Data Services.
• Collaborate with the Client Technical Manager to understand customer requirements and their technical landscape.
• Ensure clarity and implementation of non-functional requirements (NFRs).
• Utilize programming skills in Java to develop robust solutions.

Desired Candidate Profile:

• 5+ years of experience implementing data solutions using GCP and SQL programming.
• Expertise in SQL and proficiency with RDBMS and NoSQL databases.
• Solid experience with development methodologies such as RUP, Scrum, and XP.
• Exceptional communication, articulation, and presentation skills.
• Strong problem-solving skills, a learning mindset, and high integrity.
• A collaborative team player capable of engaging with diverse stakeholders effectively.

EA License: R1873481

Company EA License: 11C4879

We are looking for a QA Engineer proficient in Manual Testing.

• Gain exposure to the FinTech/ Online Gaming Industry.
• Salary package up to $4,200 + AWS + VB (~2 months).
• Dynamic working environment.

Responsibilities

• Review requirements, specifications and technical design documents to provide timely and meaningful feedback.
• Create detailed, comprehensive and well-structured test plans and test cases.
• Perform thorough regression testing when bugs are resolved.
• Stay up-to-date with new testing tools and test strategies.
• Coordinate with development team/project management team for smooth SIT/UAT.

Requirements

• Tertiary education in Computer Science or related field.
• Min 2 years of working experience in Software Testing (Web Application/Mobile Application).
• Strong knowledge of software quality assurance methodologies, tools and processes.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J50777 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

PROJECT ENGINEER

6 days work week

8 am to 5 pm

12 Day Annual Leave

Job Description:

• Manage the project site by overseeing the day-to-day site operation and activities.
• Plan, implement and monitor the work schedules according to the master and detailed work programmes.
• Assist the Project Manager in planning and sequencing of the construction operations according to the Project Quality Plan.
• Liaise with client's representatives on site, sub-contractors and suppliers.
• Conduct inspections and check on work performed by sub-contractors.
• Assist Project Manager in the evaluation and resolution of any discrepancies and problems arising during construction and which has an effect on quality of the works.
• Ensure that only updated Construction drawings and Approved shop drawings are used by all for construction. Co-ordinate the handing over of completed works to the client and completion of the necessary rectification works.
• Update the status of materials stock balance and advise Project Manager when to place replenishment orders. Any duties to be assigned from time to time.

Requirements:

• Minimum degree in Civil/Structural Engineering recognised by the PEB Approved Qualifications / BOA Approved Qualifications.
• Minimum 2-3 years relevant working experiences or local fresh graduates are welcome
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Good communicative skills, able to interact with people of all levels and teamwork
• Able to start work immediately

Interested applicants kindly apply through this job portal or email to [email protected] and I will be in touch with you shortly.

Regret only shortlisted candidates will be notified.

Goh Boon Hui R24122338
Just Recruit Singapore Pte Ltd - EA12C6295

Position Summary

Your main role will be to ensure that Lam Research comply with regulatory and safety requirements. You will be is responsible for administering and coordinating the organization’s Workplace Safety and Health Management Systems, processes and policies. This will include conducting safety inspections, closing audit findings, reviewing workplace risk assessment and coordinating safety training for all personnel.

Job Responsibilities:

• Enter, inspect and examine worksite for potential safety violations/hazards; (WSH Reg)
• Inspect and examine any machinery, equipment, plant, installation or article in the worksite for potential violations / hazards; (WHS Reg)
• Assess the level of noise, illumination, heat or harmful or hazardous substances in the worksite and the exposure levels of persons at work; (WSH Reg)
• Investigate any accident, dangerous occurrence or occupational disease that occurred within the worksite. Coordinate with management, customers and relevant authorities when an incident / accident occurred
• Employ risk mitigation strategies, and environmental and safety requirements for the business unit;
• Identify safety lapses and provide solutions to improve. Execute to aligned action plans to close the identified gaps;
• Conduct audits to ensure conformance to Lam’s and customers’ safety requirements, policies and procedures;
• Conduct safety briefings (as appropriate) including representing Lam Research at customer meetings on issues relating to EHS;
• Report/ assist in any accident / injury/ near misses’ investigations
• Establish mechanisms to implement and monitor compliance requirements such as advise and assist with job analysis, risk assessment, job instruction training, safe work procedures, method statement
• Establish tracking and ensure that all Lam personnel attend required training such as CSOC (Construction Safety Orientation Course) and other related EHS (Environmental, Health & Safety) training for employees, including new hires, contractors and loaners from other countries;
• Take appropriate action to halt any conditions that may result in imminent hazard to persons, property, or the environment;
• Perform the role of Safety Assessor for the inspection/ assessment of Permit-to-work system
• Notify the local EHS manager of any unresolved compliance issues and situations, and seek EHS guidance in implementing corrective actions as needed; facilitate and promote the exchange of information within the business unit and with EHS in the interest of collaborative problem solving and program improvement;
• Represent the business unit on EHS committees (Customer meetings) and provide regular briefings to business unit management and the local EHS manager on the unit’s environmental and safety program status, trends and risks.
• Identify PPE (Personal Protective Equipment) requirements and sourcing of approved supplier for procurement
• Assist in applying special permits if certain work is required (e.g. hot work, working at tall heights etc), including facilitating the application / renewal of licenses and liaise with relevant authorities/bodies for license / permit issue
• Maintenance of worksite safety records, certificates, notices and documents (WSH Reg)
• Manages internal WSH systems, coordinates government agency or customers visits, inspections and compliance audit at the workplace and submit audit reports to relevant stakeholder for review (Customs, Foreign Trade, Biz Safe, MOM)
• Point of contact for physical security in Singapore Office
• A key member of the SEA BCP (Business Continuity Plan) team, responsible to ensure that the business continuity plan is up to date and support the coordination of annual BCP tabletop exercise.
• Lead a team of contract EHS officer / coordinator, ensuring that adequate resources are deployed to support different customers sites.
• Any other Safety, Health and Environmental related duties as assigned by the Immediate Supervisor

Job Requirements:

• Bachelor’s degree or equivalent
• Processes relevant qualification recognized ty the Ministry of Manpower
• Must be a registered Workplace Safety and Health (WSH) Officer with the Ministry of Manpower
• At least 10 years’ experience handling a WHS in a manufacturing site, preferably in the electronic or semiconductor industry
• Possesses strong inter-personal and communications skills, both in written and spoken English
• Comfortable to interact with people of diverse backgrounds
• Is meticulous and maintains detailed and accurate records
• Possesses good analytical and problem solving skills

Responsibilities

• Responsible for Design and delivery of DeltaV systems on site.
• Participate in the design, development, and implementation of Automation solutions in line with S88 standards for the plant.
• Lead team of engineers to deliver the Automation Project on site.
• Lead, design Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards.
• As a Subject Matter expert, lead development of systems architecture, specifications, controls strategies, sequence of operations through all design stages
• Build and maintain trusted relationships with client.

Requirements

• Good technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Good experience In Automation Sector ideally in the Pharmaceutical and/or Biotechnology industry.
• Good Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc),
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector.
• Excellent computer skills, proficient in Microsoft Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills.
• Leadership abilities, works well in a team environment.
• Capacity to lead team of engineers for design, development, and delivering Automation projects.
• Experience with Operations Support on site
• Good analytical & problem-solving skills

Project/Site Engineer is responsible for planning and coordinating technical engineering initiatives to make sure they can complete a project within their budget and according to a schedule, also to uphold project standards by researching compliance regulations, developing project implementation plans and adjusting specifications for elements of a project.

1. Examine project specifications, technical clarifications, and construction drawings.
2. Execute scheduling of construction activities, requisition of materials, cost management, project oversight, and documentation to guarantee adherence to regulatory standards.
3. Collaborate with Structural, Architectural, and M&E personnel to address related challenges and concerns.
4. Ensure the timely and efficient advancement of construction activities.
5. Undertake QA/QC responsibilities in the designated area and ensure compliance with safety regulations on-site.
6. Compile various reports, including progress reports and project handover documentation.
7. Perform any additional tasks as assigned.

Education Qualifications & Other Requirements:

• 2 Years relevant working experiene.
• Diploma or equivalent.

Job Description

• Industry/ Organization Type: Electrical Equipment Manufacturer/ Production
• Position Title: Technical Support Engineer
• Working Location: Ubi
• Working Hours: Monday to Friday, 8.30 am – 5.30 pm; Saturday 8.30 am – 12.30 pm
• Salary Package: Up to $5,000 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Provide technical support to customers for UPS, DC Systems, and Battery installations, commissions, repairs, and maintenance.
• Coordinate with end-users on-site to ensure smooth installation, commissioning, and maintenance activities.
• Collaborate with customers and engineers to ensure safe execution of site work.
• Deliver training to customers on the startup and operation of UPS and DC Systems.
• Monitor and follow up on maintenance contracts to ensure work is completed promptly.

APPLY NOW!!!

• Minimum Diploma in Electrical/ Electronics Engineering or its equivalent.
• At least 3 years of relevant experience in the UPS and DC power industry.
• Willing to travel across Asia on short notice.
• Immediate availability and own transport required.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69101 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Mechanical Engineer
• Working Location: Redhill
• Working Hours: 5 days (Monday to Thursday 8.30 AM – 6 PM, Friday 8.30 AM – 5 PM)
• Salary Package: Basic Salary up to $6,000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Provide guidance and technical assistance to sales and service teams.
• Offer customized solutions for technical issues and sales inquiries.
• Assist the service team with equipment repair and maintenance.
• Develop procedures for equipment testing, maintenance, and operation.
• Coordinate in-house product assembly and validation testing and produce test reports.
• Conduct technical presentations and product training for clients.
• Create and maintain drawings, bills of materials, and design documentation.
• Discuss technical requirements with clients on-site and coordinate site work.
• Prepare method statements and reports for site work.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 3 years of working experience in Mechanical Engineering, preferably in O&G industries
• Prior experience in flange management is advantageous
• Proficiency with CAD tools such as Solidworks and AutoCAD is an advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69140 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781