Job Scope

• Responsible for planning, LAN design, configuration, installation, implementation and deployment of network infrastructure
• Perform documentation, test plans and procedures
• Perform network / systems testing
• Network troubleshooting and fault analysis
• To perform Preventive Maintenance for customer as allocated and scheduled
• To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites.
• When necessary escalate problems to the appropriate vendors / principals
• Require to travel to sites for work
• Other duties as assigned

Requirements:

• Candidate must possess at least a Diploma in Electronics/Computer Engineering/Information Technology or equivalent
• Knowledge on LAN, WAN & Wireless, switching & routing technologies (such as VLAN, STP, OSPF, BGF, etc.) will be an added advantage
• Able to work effectively in an outdoor environment
• Strong communications and written skills
• Proficient in MS Office (Words, Power-point & Excel)
• Ability to work as a team and independently with minimum supervision

Job Description & Requirements

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, STRAP, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

.Net Software Engineer (6 Months-9 Months Contract) - Can convert to Permanent role

Working Location: AMK@Link (Yio Chu Kang MRT)

Working hours: 8.30am to 6.15pm, 5-days week

Salary Range: $4,000 - $6,000 + Pro rated annual leave

Responsibilities:

• Design, develop, and maintain .NET-based containerized applications.
• Write clean, scalable code using C# programming language and .NET frameworks (e.g., ASP.NET Core, MVC).
• Collaborate with cross-functional teams to define, design, and ship new features.
• Troubleshoot, debug, and resolve issues in existing software applications.
• Participate in code reviews, ensuring code quality and adherence to coding standards.

Requirements:

• Experience with web development frameworks such as ASP.NET Core or MVC.
• Knowledge of front-end technologies like HTML5, CSS3, JavaScript, and front-end frameworks (e.g., React, Angular, Vue.js).
• Familiarity with databases (SQL Server, MySQL) and ORM frameworks (Entity Framework).
• Understanding of Agile methodologies and software development lifecycle (SDLC).

Qualifications:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• Proven experience as a .NET Developer or similar role

Interested candidates feel free to contact me.

wa.me/6597930832

Liaw Ying Ru Karis Reg No: R24125303

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Responsibilities:

- Collaborate with the sales/business development team to understand customer requirements and use cases

- Conduct POC, demo, testing and setup of security system and video analytics

- Process knowledge of basic security technology including video analytics and application scenarios

- Manage and execute new/existing projects

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Process market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

- Forward looking in term of industry/technology trend to improve business portfolio

Requirements:

- Diploma or Degree in any discipline

- Ability to understand and address customer requirements and translate them into

technical solutions

- B2B (Business-to-Business) experience in robotic/physical security

- Process negotiation, networking, presentation, project management, market analysis, strategic skill will be an advantage

Job Responsibilities :

- To develop and maintain business strategies by achieving sales target and increased market shares.

- Visits customer to drive sales pitch and product presentations

- Responsible for achieving sales revenue and profit target

- Align and link business strategies set by company

- Build strong relationship with existing and new customers

- Provide sales and after-sales support, in coordination with our internal departments and customers

- Prepare sales quotations for customer.

- Follow up with after sales issues.

- Market studies and feedback to sales manager

- Monitors sales quotation status and forecast.

- Performs order screening and preparation for clean order processing

- Ensures proper documentation of all sales quotations in line with the ISO standards and processes.

- Participate in any ad-hoc projects as assigned by management and or sales manager from time to time

Job Requirements :

- Diploma / Degree in Engineering

- 3 years of relevant experience

- Experience in Process Instrumentation / Automation Industry

- Experience with MRO Sales an added advantage

- Independent and Team player

- Excellent communication and interpersonal skills

Familiar with CRM and ERPLN

Engineer/Senior Engineer, Fire protection

Duties & responsibilities:

• To monitor and supervise sub contractors’ work progression according to shop drawings, method statements, material and samples
• To liaise and work with relevant authorities, sub-contractors or clients on shop drawings, materials and samples
• Review and align Fire protecton design drawings to ensure compliance with design specifications and guidelines (Sprinkler System, Fire Alarm System, Hosereel System, Wet/Dry riser system, Fire Hydrant System, Fire man intercom system)
• Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions
• Manage and execute project as per the schedule
• To attend meeting with contractors to address issues and update progress
• Study and reviewing of drawings, specifications for compliance
• Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.
• Plan and lead testing and commissioning of the fire protection systems.
• Follow up with site / authority inspections, defects rectifications of the fire protection works.
• Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.
• Follow up with maintenance of fire protection systems during DLP.

Education / Experience / Special Skills:

• Degree in Mechanical Engineering/Building Services OR Diploma in Mechanical Engineering/ Building Services
• 5 years of relevant experience
• Proficient in MS office
• Good communication and written skills
• Experience in Water Mist system and/or foam system is added advantage
• Able to work independently and possess good interpersonal skill

• Deliver technical solutions to clients and take responsibility for the standards of work, project sign off and client satisfaction.
• Provide client support, assisting with troubleshooting and design, configuration and escalated problem management.
• Act as key project team members charged with the analysis of client and technical requirements, specifications development, solution design and development, and in some environments may consult on testing and deployment processes.
• Expected to be technology leads for specific technologies and to use their deep knowledge of these technologies to propose enhancements.
• Interact with clients on site to meet complex requirements of a solution.
• Escalate unresolved problems and issues to the relevant third parties.
• Respond to escalated client requests and support client applications to a first line resolution.
• Escalate complex problems to the relevant third parties.
• Write reports and proposals and complete and maintain project documentation.
• Assist with the documentation of standard operating procedures relating to installations and fixes.
• Act as coach and mentor to more junior Implementation Engineers and Technicians.
• Assume responsibility for the co-ordination of the activities of the Engineers, in line with performance targets.
• May be required to serve periodically on the customer service desk, providing third line telephonic, remote and on-site support and problem management.
• Included in higher complexity design work, with input to the design expected.
• Expected to take ownership of relevant technologies according to domain or specialization.
• Knowledge, Skills, and Attributes:
• Good understanding and appreciation of technical design and business principles
• Demonstrates project management and administration ability.
• Good project skills which are demonstrated in the execution of installations and other assignments.
• Demonstrate customer engagement skills.
• Demonstrate relevant domain specialist knowledge.
• Good verbal communication skills
• Client focused and displayed a proactive approach to solving problems.
• Ability to work under pressure.
• Ability to coach, mentor and provide guidance to team members.
• Good understanding of project management principles

Academic Qualifications and Certifications:

• Computer Science / Information Technology Degree or equivalent together with specialized training in new technologies and legacy systems or equivalent
• CCNP (SDN, ACI, SDA, SD-WAN, DNAC), Meraki
• CCNP (Wireless, Meraki)
• ACMA, ACMP, ACCA, ACCP
• ACFE, ACSE
• JNCIA, JUNCIP-ENT, JCIA-MistAI
• CCSE, PCNSE, NSE4
• SolarWinds NPM, NCM
• CCIE – highly advantageous
• F5 Certified Technical Specialist (30X track) – highly advantageous
• Nokia GPON – highly advantageous
• Project management certification

Required Experience:

• At least 5 – 8 years' professional technical experience related to software development, systems design and deployment, or networking and infrastructure within a large scale (preferably multi- national) technology service environment.
• Experience in designing and building complex LAN and large WAN.
• Expertise in routing/switching technology, including BGP, OSPF, etc.
• Experience in designing and building complex data center network with Software Defined Networking (SDN) solutions such as SD-WAN, Cisco ACI, VMware NSX or any OpenFlow protocol.
• Experience in designing and building complex WLAN – Cisco/Meraki/ Aruba/ Alcatel/ Juniper Mist
• Extensive in Network Access Control – ISE/ Aruba ClearPass
• Extensive hands-on LAN switches: Cisco N9K, Alcatel Omni Switches, Juniper EX switches
• Extensive hands-on Wireless site survey; Post & Pre heatmap generation
• Experience in designing and building complex campus network with Software Defined Access (SDA) solutions from Cisco or any other SDA vendors.
• Experience in network automation via scripting (e.g., Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)
• Experience in designing and building network security (Checkpoint, Palo Alto, FortiGate, Cisco firewall, IDS/IPS, VPN, SSL), Content Networking (cache, load balancer, F5, etc.)
• Experience in project management methodologies

What you’ll do:

• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Responsible for project management, design coordination and contract management
• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission documents

Job Description & Requirements

We are looking for a highly driven and self-motivated Cyber Security Consultant to join our team! As a member at our company, you will have the opportunity to work on new and exciting projects and develop your career.

JOB SUMMARY

You will participate in a variety of engagements, focusing on targets that may include network equipment, servers, applications, APIs, wireless infrastructures, mobile devices, and other information systems. Using a variety of tools and techniques that may include red teaming, you will have the opportunity to combine technical expertise with your imagination to discover innovative methods with the goal of ensuring customers remain one step ahead of its adversaries.

Hands on Responsibilities:

·Support the sales by attending security sales meeting (if necessary), effort estimation and provide security testing project timeline

·Develop the security acceptance test plan

·Provide expert technical support during the security testing activities

·Security test preparation, setting-up of testing environment, configuration and installation of the security testing tools

·Perform manual or automated security testing using commercial security testing tools

· Conduct Greybox Testing (Authenticated) and/or Blackbox Testing (Unauthenticated) Penetration Tests

· Conduct Whitebox Testing and Secure Code Review

· Conduct Network and Infrastructure Vulnerability Assessment and Penetration Testing

· Conduct Web, Mobile and Desktop Application Vulnerability Assessment and Penetration Testing

· Find and pinpoint the vulnerabilities of the assess target system / application

· Document and Report the vulnerabilities found in the system

· Provide professional recommendations / advice to mitigate and resolve the vulnerabilities

· Present the security testing results to the relevant stakeholders

·Provide weekly status reporting on the security testing activity progress

Requirements:

· Bachelor's degree, preferably in computer science or information systems, or equivalent work experience

· Minimum 3 - 5 years security experience in a security analyst, engineer, architect, consultant, or a similar role

· Minimum 3 years’ professional experience in conducting vulnerability assessment and penetration testing

· Required Certifications: Any of the followings

o CREST Registered Penetration Tester (CREST CRT)

o Offensive Security Certified Professional (OSCP)

· Knowledge in conducting security testing with the following guidelines and standards

o Open Web Application Security Project (OWASP Top 10 Frameworks)

o Common Vulnerability Scoring System (CVSS)

o Common Vulnerabilities and Exposures (CVE)

o Common Weakness Enumeration (CWE) / SANS Top 25 Software Errors

· High proficiency in manual and automated techniques for penetration testing (network equipment, servers, web applications, APIs, wireless, mobile, databases, and other information systems), as well as executing vulnerability assessments (injection, privilege escalation, fuzzing, buffer overflows, etc.)

· Tools – Proxies, Port Scanners, Vulnerability Scanners, Exploit Frameworks (ex: Burp, Nessus, Nmap, Metasploit)

· Strong oral and written communication skills, including a demonstrated ability to prepare quality documentation and presentations for technical and non-technical audiences

Test Planning and Strategy:

• Define test strategies, plans, and processes tailored to project requirements.
• Analyze project requirements to identify potential risks and testing needs.
• Create and maintain detailed test plans, schedules, and resource allocation.

Team Leadership and Coordination:

• Lead and mentor a team of QA testers, providing guidance and support.
• Assign tasks, monitor progress, and ensure deadlines are met.
• Facilitate communication between QA, development, and project management teams.

Test Execution and Reporting:

• Oversee execution of functional, regression, integration, performance, and user acceptance tests.
• Ensure thorough documentation of test cases, results, and defects.
• Track and report on test progress, coverage, and results to stakeholders.

Quality Assurance:

• Identify, log, and track defects to closure, collaborating with developers for resolution.
• Ensure adherence to quality assurance best practices, standards, and procedures.
• Monitor and improve the effectiveness of testing processes and tools.

Stakeholder Collaboration:

• Work closely with product owners and developers to clarify requirements and ensure testability.
• Participate in project planning and risk assessment discussions.

Qualifications:

• Degree/Diploma in Computer Science, Software Engineering or equivalent from a recognized university
• Minimum 5 years of hands-on experience in involving software testing life cycle phases for medium to large-scale systems
• Experience in large scale projects testing and commissioning in the transport/traffic management domain (especially enterprise-wide Traffic Management System related) would be advantageous
• Strong in all aspects of system & software application testing in various test levels such as
• Component Testing, Integration Testing, System Testing and Acceptance Testing
• Experience in using JIRA, Xray, Confluence, Postman, Swagger, REST, JSON, and MS Excel
• Collaborate with various teams to facilitate the orderly execution of assigned tasks
• Written and verbal communication skills to successfully share the testing results and make recommendations
• Good communication skills, interpersonal skills, problem solving skills and analytical skills
• Willingness to learn new things with open mindse

We’re searching for an Infrastructure / System Engineer to be part of our diverse team of talents here at NCS!

If you believe in going above and beyond, want to exemplify the best, and wish to bring people and technology together like never before, then we would love to have a conversation with you!

Overview

We are seeking an experienced Infrastructure Engineer to join our Infra team that is providing critical operations and maintenance for an enterprise customer. The ideal candidate will have advanced expertise in VMware Virtualization, Windows Server 2016/2019, Veritas NetBackup, Red Hat Enterprise Linux (RHEL), and SAN storage. This role is essential for ensuring the stability, reliability, and performance of the customer’s IT infrastructure.

What we seek to accomplish together:

1. VMware Virtualization:

• Design, deploy, and manage VMware virtual environments.
• Perform advanced troubleshooting and optimization of virtual infrastructure.
• Ensure high availability and disaster recovery configurations for virtualized environments.
• Conduct regular health checks and performance tuning of VMware systems.
• Perform regular updates, patching, and security hardening for VMware environments.

2. Windows Server Administration:

• Manage and maintain Windows Server 2016/2019 environments.
• Perform regular updates, patching, and security hardening.
• Implement and manage Active Directory, Group Policy, DNS, and DHCP.
• Troubleshoot and resolve server related issues to ensure optimal performance.

3. Veritas NetBackup:

• Configure and manage backup and recovery solutions using Veritas NetBackup.
• Perform regular backups, restore operations, and disaster recovery testing.
• Monitor backup jobs and troubleshoot failures.
• Ensure compliance with backup policies and retention requirements.
• Perform regular updates, patching, and security hardening for Veritas NetBackup environments.

4. RHEL Administration:

• Install, configure, and maintain Red Hat Enterprise Linux servers.
• Perform system updates, patch management, and security hardening.
• Monitor system performance and troubleshoot issues.
• Automate routine tasks using shell scripting and other tools.

5. SAN Storage Management:

• Configure and manage SAN storage solutions.
• Monitor and optimize storage performance and capacity.
• Perform regular maintenance, updates, and patching of storage systems.
• Troubleshoot and resolve storage related issues to ensure data integrity and availability.

6. General Responsibilities:

• Participate in the planning and execution of infrastructure projects.
• Collaborate with crossfunctional teams to support application deployments and updates.
• Maintain detailed documentation of configurations, procedures, and operations.
• Provide 24/7 support for critical infrastructure components as part of an oncall rotation.
• Ensure compliance with company policies and regulatory requirements.

We are driven by our AEIOU beliefs—Adventure, Excellence, Integrity, Ownership, and Unity—and we seek individuals who embody these values in both their professional and personal lives. We are committed to our Impact: Valuing our clients, Growing our people, and Creating our future.  

Together, we make the extraordinary happen.  

Learn more about us at ncs.co and visit our LinkedIn career site. 

We handle all profiles with the highest level of confidentiality.

• Responsible for ensuring highest possible uptime and availability for mechanical equipment in the scrap processing plant.
• Responsible for reliability is highest possible and where needed facilities / perform root cause investigations to increase reliability and general performance of equipment.
• Ensure incident free and reliable operation, including timely and proper maintenance of systems.
• Responsible for implementing Maintenance Excellence by aligning with International Best Practice on mechanical equipment.
• Ensure future maintenance activities are proactively planned, prepared and scheduled with the required level of equipment integrity and reliability.
• Ensure liaison with production team and other stakeholders to stay updated on the on-going maintenance activities.
• Other adhoc duties as assigned

Joy Yeow Zhi Qian

(CEI Registration No:R2096261)

Recruit Express Pte Ltd (EA Licence No: 99C4599)

Location: Tuas, Work on site (sea)

Working Days: 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary: $3500 - $4000 + AWS+ Variable Bonus + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

https://wa.me/6596420989

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Our client is a manufacturer in Oil & Gas industry. Due to business needs, they are now recruiting a Key Account Manager to join their sales team. They are located in the West - easily accessible.

Responsibility:

• Servicing and maintaining manual lathe machines, CNC machines, and deep hole boring equipment to ensure they are functioning at optimal capacity.
• Troubleshooting mechanical and electronic issues that could affect machine performance.
• Preventive maintenance to minimize downtime and ensure the longevity of the equipment.
• Performing detailed inspections and calibrations to maintain precision in machining operations.

Requirements:

• Min 2 years of maintenance experience for Deep Hole Drilling
• Min Diploma in engineering field

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Job Highlights:

• Established Fortune 500 MNC in Biopharma industry
• Up to $110,000 per annum (exclude performance bonus)

Job Responsibilities:

• Develop and execute validation protocols (IQ/OQ/PQ) for equipment, processes, and facilities in compliance with regulatory standards.
• Conduct risk assessments and validation impact assessments for new and existing equipment/process changes.
• Prepare and manage validation documentation, including protocols, reports, and work instructions, in alignment with Good Documentation Practices (GDP).
• Review and analyze validation data to determine compliance and troubleshoot any deviations or failures.
• Collaborate with cross-functional teams, including Quality, Manufacturing, and Engineering, to ensure validation objectives are met.
• Ensure that validation activities comply with cGMP, FDA, EMA, and other regulatory requirements.
• Support change control processes by evaluating the impact of proposed changes on validated systems and processes.
• Lead validation activities for new product introductions, equipment installations, and facility expansions.
• Participate in regulatory audits and inspections, presenting validation documentation and supporting audit requirements.
• Perform periodic reviews of validated systems to maintain compliance and update validation status as necessary.
• Train and guide team members in validation processes and best practices.

Job Requirements:

• Bachelor’s degree in Engineering, Life Sciences, or a related field.
• Minimum of 5 years of experience in validation engineering within the pharmaceutical industry.
• Strong knowledge of cGMP regulations, validation standards, and documentation requirements.
• Proficient in risk assessment and root cause analysis techniques.
• Excellent communication and project management skills.

If you are keen to explore this career opportunity, kindly send a copy of your resume to [email protected] or simply click the button to APPLY NOW! We regret that only shortlisted applicants will be notified.

Chan Ku Ci - R22111446

EA License No: 16C8261

My client is a well-known Internet company with 1000+ employees in China and Singapore. They are looking for Frontend Engineer in Singapore due to business expansion. This position focuses on internal system. This is the opportunity to join the team and be the one of core teammates in Singapore.

Responsibilities:

• Design, Develop and optimise frontend website for internal systems
• Collaborate with a cross-functional team of Product Designers & Product Managers to deliver compelling user-facing products
• Develop efficiency engineering platform to align with business requirement
• Keep abreast of of cutting-edge architecture and advance the scalability and user experience

Job Requirements:

• BS/MS degree in Computer Science or equivalent majors with experience in frontend development
• Good understanding of modern frontend architecture, React, TypeScript, JavaScript
• Commitment to producing high-quality, well-tested solutions
• Excellent problem-solving skill and the ability to work on complex technical challenges

If it sounds like your next move, please don’t hesitate to apply. Kindly note that only shortlisted candidates will be contacted. Appreciate your understanding. Data provided is for recruitment purposes only.

About Us

Dada Consultants was established in 2017, with the commitment of providing the best recruitment services in Singapore. We are comprised of a dynamic head-hunting team dedicated to sourcing for highly competent professionals in IT industry. We provide enterprises with customized talent solutions, and bring talents to career advancement.

www.dadaconsultants.com

EA Registration Number: R2197058

Business Registration Number: 201735941W. Licence Number: 18S9037

Business Function

Group Technology and Operations (T&O) enables and empowers the bank with an efficient, nimble, and resilient infrastructure through a strategic focus on productivity, quality & control, technology, people capability and innovation. In Group T&O, we manage the majority of the Bank's operational processes and inspire to delight our business partners through our multiple banking delivery channels.

Job Purpose

A network engineer with level 2 network support for Data Centre and Campus network. (SG & Regional)

Key Accountabilities

• Accountable for project and operation of Data Centre and Campus network.
• Accountable for level 2 network support for troubleshooting network operational issues relating to Data Centre and Campus network

Responsibilities

• Responsible to plan, coordinate, and work with various vendors for network deployment to Data Centre and Campus network setup.( SG and Regional )
• Responsible for network asset, network IPs, circuit, and inventory management
• Responsible to work with the respective network vendors’ support teams for the troubleshooting, identification, and resolution of network problems.
• Responsible for network devices, as well as appliances, vulnerability review and assessment
• Responsible to work on the network engineering and design for new initiatives.
• Responsible to work with respective countries’ s network team members on the review of network architecture and design, troubleshooting, as well as to work on the replacement of EOS network system or devices.
• Ready to be on call for 24x7 support.
• Prepare network configuration for network deployment.
• Implement change during green zone hours.
• Assist Level 2 & 3 Engineers during problem determination and resolution when necessary.
• Track and ensure network configuration security compliance and fixes are applied within schedule
• Hands on experience in Network Monitoring servers like Grafana, Nagios, Netbrain, Kibana etc.

Requirements

• Bachelor's degree in engineering or diploma in IT or equivalent
• 10 years of network engineer experience with the following skills and competencies:
• Knowledge and experience on IP addressing and subnetting
• Experience with coordinating with multiple vendors for network deployment and project management
• Experience in trouble shooting in different platforms on network.
• Experience with onsite support for network deployment like ACI , SDA , Huawei Imaster , F5 and Wireless technology
• Knowledge and experience in using network management systems, i.e. Cisco SDA, Huawei iMaster and 5G Wireless technology.
• Knowledge and experience in employing and using various networking trace tools, i.e. Sniffer, Wireshark, riverbed net profiler, NetBrain, Gigamon, ELK etc
• Hands on knowledge of advanced routing, switching and other network infrastructure technologies such as:
• BGP, OSPF
• MPLS, dark fiber (DWDM) technology
• DMVPN, GRE, IPsec VPN, QoS, Multicast
• Cisco SDA,
• NAC
• Huawei iMaster
• 5G wireless Knowledge
• Pro-active, dynamic and with good analytical/conceptual thinking
• Meticulous, dateline oriented and able to prioritize and multi-task
• Certifications such as CCNP , HCNA or equivalent level in networking.
• 3 to 5 years of experience in supporting complex banking IT environment or equivalent
• Must be willing to work 24*7 depending on the work schedule
• Able to work in a fast-paced environment

Apply Now

We offer a competitive salary and benefits package and the professional advantages of a dynamic environment that supports your development and recognizes your achievements.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Assurance Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Location: Tuas, Work on site (sea)

Working Days: 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary: $3500 - $4000 + AWS+ Variable Bonus + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

Company’s Profile

Our Client company is a prominent engineering company based in Singapore, specializing in HVAC (heating, ventilation, and air conditioning) systems, as well as other building services. The company is known for its commitment to sustainability and energy efficiency, providing innovative solutions for both commercial and residential projects.

Salary Package:
Basic Salary: $5000 - $6000

Working Location: Ang Mo Kio / Yio Chu Kang / Central

Working Hours: Mon - Fri 8.30am - 5:30pm

Key Responsibilities:

· Lead and manage the electrical team.

· Oversee design, calculations, planning, and tender preparation.

· Guide team development and review QA/QC documentation.

· Coordinate with clients, project managers, architects, and contractors.

· Resolve technical issues during design and construction phases.

· Recommend solutions to improve efficiency and revenue.

· Supervise testing and commissioning of ACMV electrical systems.

· Ensure compliance with electrical codes and standards.

Requirements:

· Any qualification in a relevant engineering field with minimum 5 years of related working experience in the Construction Electrical Field associated with ACMV / Electrical.

· Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

· Possess design experience and good understanding of ACMV / Electrical technical systems and procedures:

· Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.

· Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

· Productions of drawings and developing models

· Site Experience, Testing & Commissioning Experience

· Having experience working with Infrastructure Projects would be an added advantage.

Candidates without experience are welcomed to apply! On job training will be provided!

*Able to start work within short notice will be highly advantageous.*
**Please be notified that only shortlisted candidates will be notified**

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: TOH SHIQI

EA Personnel No: R23119083

EA License No: 21C0845

Company’s Profile

Our Client company is a prominent engineering company based in Singapore, specializing in HVAC (heating, ventilation, and air conditioning) systems, as well as other building services. The company is known for its commitment to sustainability and energy efficiency, providing innovative solutions for both commercial and residential projects.

Salary Package:
Basic Salary: $4200 - $5000

Working Location: Ang Mo Kio / Yio Chu Kang / Central

Working Hours: Mon - Fri 8.30am - 5:30pm

Key Responsibilities:

· Assist in managing the electrical team.

· Perform design, calculations, planning, and tender preparation.

· Support team development and review QA/QC documentation.

· Collaborate with clients, project managers, architects, and contractors.

· Troubleshoot technical issues during design and construction.

· Contribute ideas for improving efficiency and revenue.

· Assist with testing and commissioning of ACMV electrical systems.

· Ensure compliance with electrical codes and standards.

Requirements:

· Any qualification in a relevant engineering field with minimum 1 year of related working experience in the Construction Electrical Field associated with ACMV / Electrical.

· Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

· Possess design experience and good understanding of ACMV / Electrical technical systems and procedures:

· Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.

· Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

· Productions of drawings and developing models

· Site Experience, Testing & Commissioning Experience

· Having experience working with Infrastructure Projects would be an added advantage.

Candidates without experience are welcomed to apply! On job training will be provided!

*Able to start work within short notice will be highly advantageous.*
**Please be notified that only shortlisted candidates will be notified**

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: TOH SHIQI

EA Personnel No: R23119083

EA License No: 21C0845

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Marine Service Engineer

Location at Tuas, Work on site (sea)

5 Work Days 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary Open for Discussion + AWS(dec) + Variable Bonus (Jan) + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• Must DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

As the Equipment Supplier Quality Principal Engineer, you will lead a global team to ensure the highest quality standards for equipment supplied to our company. You will be responsible for establishing and maintaining strong relationships with critical suppliers, managing supplier quality governance processes, and driving continuous improvement programs. This role requires collaboration with various departments, including development, engineering, manufacturing, and procurement, to meet the business needs and ensure supplier compliance with quality management systems.

Key Responsibilities:

• Lead and manage a global team of Supplier Quality Engineers to achieve best-in-class supplier quality performance.
• Establish and maintain close relationships with critical suppliers' management teams and internal stakeholders.
• Ensure consistent management and deployment of quality requirements and supplier quality governance processes.
• Drive continuous improvement programs with critical suppliers to enhance quality performance.
• Ensure suppliers deliver the highest possible quality materials and comply with Quality Management System (QMS) requirements, standards, and other quality safeguard programs.
• Conduct regular audits and assessments of supplier processes and quality systems.
• Develop and implement supplier quality metrics and performance monitoring systems.
• Collaborate with development, engineering, manufacturing, and procurement teams to resolve quality issues and implement corrective actions.
• Provide training and support to suppliers on quality standards and requirements.

Qualifications:

• Bachelor's degree in Materials Science, Electrical Engineering, Mechanical Engineering, or a related field.
• Minimum of 8-10 years of experience in supplier quality management, preferably in the semiconductor or electronics industry.
• Strong knowledge of quality management systems, standards, and methodologies.
• Proven experience in leading and managing a global team.
• Excellent communication and interpersonal skills.
• Strong analytical and problem-solving abilities.
• Ability to work effectively in a fast-paced and dynamic environment.

Preferred Qualifications:

• Master's degree in a related field.
• Certification in quality management (e.g., Six Sigma, ISO 9001).
• Experience with supplier quality management in a multinational corporation.