• Provide technical subject matter expertise to enhance the electrical reliability and ensuring all KPIs are met.

• Improve reliability of electrical equipment by implementing repair recommendations and conducting inspections based on engineering codes and standards.

• Provide troubleshooting services to resolve electrical issues impacting safety, quality and reliable plant operations.

• Offer technical reliability guidance to site maintenance team during unplanned electrical outages.

• Liaison with OEMs and vendors for reliability improvement works and raise PRs for spares and services.

• Develop and implement preventive maintenance programs, analyze reports and address recurring issues.

• Roll out reliability improvement programs for the site based on global directives.

• Identify, procure and manage the critical spares required for electrical maintenance.

• Lead reliability-related RCA/Failure Investigations and conduct FMEA.

• Review and grade the low level RCAs performed by technicians and suggest action plans.

• Lead the RCM and CERR programs for electrical discipline addressing critical issues and bad actors.

• Provide technical support for process safety studies like PHA related to electrical discipline.

• Execute Turnaround job scopes for electrical discipline and ensuring all the TA KPIs are met.

• Review standard maintenance procedures and risk assessments for electrical equipment.

• Support global and site audits related to electrical reliability and close assigned action items.

• Raise MOCs for new projects and non-RIK modifications related to reliability improvement.

• Provide cost-saving ideas and productivity projects to reduce maintenance and TA costs.

• Review and optimize the warehouse inventory stock for electrical discipline-related spares.

• Support procurement teams in the vendor selection and approval process.

• Coordinate with OEM, electrical vendors, service contractors to define scopes, schedules and progress updates.

• Prepare five-year capital plan for discipline-related projects and lead reliability improvement capital projects.

• Expertise in electrical system studies such as short-circuit calculations, load flow analysis, relay coordination, motor starting analysis, harmonics studies and arc flash analysis.

• Proficiency with electrical equipment such as MV/LV switchgear, induction motors, power and control cables, bus ducts, UPS systems, transformers, diesel generators, VFDs, and SS.

• Good understanding of single line diagrams, control schematics, interconnection diagrams and logic diagrams.

• Strong knowledge of Singapore’s earthing, lightning protection

requirements and hazardous area classification.

• Review vendor drawings and electrical design calculations for electrical equipment and perform FAT of electrical systems at

OEM/Vendor sites for electrical projects.

• Execute SAT, loop testing, interlock, function testing, assist in electrical pre-commissioning and commissioning activities for electrical projects.

• Prepare project close-out reports, hand over systems to operations and update technical documentation.

• Participate and support the safety, quality and reliability programs of the site.

• Collaborate with multidisciplinary teams to ensure performance

standards are met by implementing best practices and maintaining compliance with industry standards.

• Mentor electrical team members in areas of technical expertise and provide training to in-house electrical contractors and operations team on mandatory electrical trainings.

• Network with peers and industry experts to adopt best practices for technology improvement and reliability programs.

•     Must have at least 2 years of developer experience, along with knowledge of Flutter.

•     Diploma/Bachelor’s degree in Computer Science or any other related field.

•     At least 2 years of professional experience in full lifecycle & full stack (front end + back end) application integration and development .

•     Hands-on implementation experience in building scalable web applications

•     Experience in following domain area/ technology/ programming languages

o     Server-side programming languages: JavaScript, Python

o     Experience in SQL database

o     Must have experience in DevOps, CI/CD Pipeline and/or DevOps tool chains

o     Implementation experience in at least one of these Web App frameworks: React, Angular, Flutter, Bootstrap, Vue.js

o     Front end data visualization frameworks and tools: Chart.js, React-vis, Goggle Maps, amCharts, D3.js, Plotly.js

•     Code management and deployment

•     Familiar with current UX trends on web & mobile applications

Additional experience in JavaScript 3D library like three.js and Cesium would be advantageous.

Responsibilities:

• To assist QP(Supervision) on the site supervision and coordination works.

• To attend site meetings and resolve site technical issues.

• To review contractor’s submission.

Requirements:

• Registered with IES as Resident Engineer (RE) in Singapore.

• Minimum 4 years relevant site experience and preferably in viaduct structures and/ or geotechnical works.

• Able to work independently as well as in a team.

Responsibilities:

• Work closely with other members of the team to develop software solutions to grow the P&L
• Design, develop and own high-performance solution stacks
• Maintain, monitor, extend and optimize existing trading systems
• Contribute to the firm’s technical roadmap
• Contribute to inter-team and cross-team efforts to ensure success of the business
• Provide L3 support for production issues

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering or similar disciplines
• Familiarity with Linux operating systems
• Good communication skills
• Interest in financial markets (with at least a basic understanding of cryptocurrencies)
• Must be able to multitask and work with minimal supervision
• Good grasp of software engineering principles
• Ability to translate non-technical requirements into technical tasks
• Good understanding of low-to-high level testing and performance optimization principles, statistical performance measuring and test-driven development approaches
• Understanding of low-level performance tuning concepts (e.g. microprocessor architecture, Linux kernel, networking, blockchain architecture)
• Experience working on high performance, low latency trading systems is a must
• Proficiency in Python and/or C++ preferred
• Knowledge of SQL and NoSQL (e.g. Redis, Mongo, Timescale) is a plus
• Knowledge of other technologies such as CI/CD, Docker and Kubernetes is a plus
• Familiarity with cloud computing services is a plus

Working within the Embedded SRE organisation, the Application Support Analyst will be handling the day-to-day operations including handle, triage and escalate on alarms and issues that may arise.

Job Responsibilities

• Provide Level 1 troubleshooting support and response, and be on standby up to 12h a day during the week of standby.
• Log, escalate and follow through with issues, ensuring that issues are resolved.
• Review and improve our alarms and alarm response.
• Periodic reviews and submission of the capacity needs of the business.
• Support and/or drive disaster recovery response drills.
• Deploy new versions of the software.
• Generate reports on the operational workloads, review capacity needs of the business, support and/or drive disaster recovery response drills.

Requirements

• Diploma/Bachelor's Degree in Computer Science or other related discipline.
• 2-5 years of Technical/Application Support experience on various technology platforms.
• Responsible and proactive approach to resolving problems, and being able to have a structured approach to problem-solving.
• Open to work shift work and be on on-call rotation.

• Designing, deploying, and maintaining cloud infrastructure.
• Monitoring via automation cloud resources for performance and cost optimization.
• Troubleshooting and resolving cloud-related issues.
• Develop, implement, and maintain configuration of underlying cloud services, specializing in M365 and Azure.
• Developing scripts for deployment, monitoring, reporting, and alerts, ensuring a robust, redundant, scalable 100% uptime infrastructure.
• Analyze security threats and applicability to customer environments.
• Triage and resolve technical and user issues.
• Collaborating with cross-functional teams to implement cloud solutions.
• Ensuring compliance with security and data protection policies.
• Troubleshoot and resolve issues related to Microsoft 365 services.
• Implement new features and updates in the Microsoft 365 environment.
• Ensure the security and compliance of the Microsoft 365 environment.
• Collaborate with other IT professionals and departments tounderstand their needs and provide solutions.
• Create and maintain documentation for Microsoft 365 configurations and procedures.
• Monitor the performance and usage of Microsoft 365 services.
• Perform regular audits and assessments of the Microsoft 365 environment.
• Develop and implement policies and procedures for Microsoft 365 usage.
• Provide technical support for Microsoft 365-related projects.
• Assist in the migration of data to Microsoft 365 services.
• Manage user accounts, licenses, and permissions in Microsoft 365.
• Manage Mobile Devices (corporate phones and BYOD)

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to A-IT Software Services Pte Ltd’s PDPA and e2i PDPA.

Job Responsibilities:

• Perform basic and advanced machine electrical wiring works
• Develop electrical testing jigs and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard
• Able to troubleshoot and resolve machine electrical non conformance
• Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Electrical) required
• 0-3years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, kindly click on “Apply Now” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Description:

• Expand customer base and business opportunity
• Prepare sales reports, project monitoring, and other ad-hoc duties as assigned
• Liaising with various suppliers and customers
• Working towards the company's overall sales and marketing plan

Job Requirements:

• Diploma / Degree in Mechanical / Electrical / Engineering field
• Willing to travel to various Asian countries for sales promotion
• Technical and Sales knowledge
• Team player and self-motivated
• Well-versed in MS Word, Excel, and PowerPoint
• Good interpersonal and communication skills
• Able to multitask
• Experienced or fresher is welcomed, training will be provided
• Hindi/Tamil language skills to liaise with Indian clients

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems. Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Our client is a renowned security solution provider that delivers turn-key solutions. They have carved a reputation for themselves and are committed to developing their people through continual career development training.

Education / Experience:

• Diploma / Degree in IT / Computer Engineering or equivalent
• 1 year of experience in IT Support & Monitoring (Will consider Fresh Graduate with a good attitude)

Job Description:

• Supporting deployment of on-site data centre physical infrastructure.
• Installing, replacing and troubleshooting Cables and Hardware.
• Handling data-bearing devices (ex. hard drives, solid-state drives, etc.)
• Working within a ticket-based environment.
• Movement of equipment using pallet jacks or other assisted lifting equipment.
• As required, assisting the Datacentre Inventory and Asset Management Team (DIAT) with
• shipping/receiving and inventory management to address high work volumes.
• Flexibility to work non-standard business hours that may include weekends and/or holidays.

Skill sets:

• Basic knowledge of computer hardware and components.
• Six (6) months or more handling/maintaining any technical equipment or machinery.
• 1+ years’ experience supporting IT equipment or related technology.
• Applicable certifications: CompTIA (A+, Server+, Network+), Basic Structure Cabling (BSC).
• Ability to support frequent standing, walking, lifting, and working at heights with or without
• equipment assistance.
• Able to communicate effectively.
• Proficient in written and oral English communication to support regional and global teams.
• Desire to learn, grow, and develop new technical skills.

Our client is a renowned security solution provider that delivers turn-key solutions. They have carved a reputation for themselves and are committed to developing their people through continual career development training.

They are seeking an Infrastructure Delivery Engineer to join their growing team.

Responsibilities:

• Implement, Maintain and administer network, OS, Storage and backup
• Collaborate on system development tasks to include design, implementation, integration and testing
• Provide on-call, 24x7 support for systems on a rotating basis. Implement corrective procedures to resolve production problems and minimize unplanned system outages
• Create and maintain programmatic and technical documentation to ensure efficient planning and execution
• Coordinate with external parties and customers for problem resolutions

Requirements:

• Ideally 1-3 years of relevant experience
• Knowledge of IT Infrastructure such as OS, Network, Storage & Backup
• Passionate about new technologies and keen to pick up new skillsets
• Good team player and ability to work independently
• Ability to manage multiple stakeholders
• Preferred skillsets:

1. Window servers (AD, DNS, Clustering)
2. Linux (Redhat, Centos)
3. Virtualisation (VMWare, HyperV, OVM, KVM)
4. Scripting (Linux Bash, Linux Python, Red Hat Ansible, Windows Powershell)

Responsibilities:

• Work closely with other members of the team to develop software solutions to grow the P&L
• Design, develop and own high-performance solution stacks
• Maintain, monitor, extend and optimize existing trading systems
• Contribute to the firm’s technical roadmap
• Contribute to inter-team and cross-team efforts to ensure success of the business
• Provide L3 support for production issues

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering or similar disciplines
• Familiarity with Linux operating systems
• Good communication skills
• Interest in financial markets (with at least a basic understanding of cryptocurrencies)
• Must be able to multitask and work with minimal supervision
• Good grasp of software engineering principles
• Ability to translate non-technical requirements into technical tasks
• Good understanding of low-to-high level testing and performance optimization principles, statistical performance measuring and test-driven development approaches
• Understanding of low-level performance tuning concepts (e.g. microprocessor architecture, Linux kernel, networking, blockchain architecture)
• Experience working on high performance, low latency trading systems is a must
• Proficiency in Python and/or C++ preferred
• Knowledge of SQL and NoSQL (e.g. Redis, Mongo, Timescale) is a plus
• Knowledge of other technologies such as CI/CD, Docker and Kubernetes is a plus
• Familiarity with cloud computing services is a plus

Infrastructure Engineer

Job Description:

• Operate, manage, and maintain VMWare ESX and HCI technologies

• Knowledge of administering Windows Server 2016, SQL 2016 and Windows Clustering technology

• Red Hat administration

• Plan, coordinate, and execute product installations, product upgrades, patch installations and hot fix installations

• Create, manage, and maintain documentation related to the managed systems and operation

• Perform hardening benchmarks adhering to defined procedure and checklist. Maintain the infrastructure in such a way that it is secure against unauthorized access.

• Deploy and deliver the project deliverables as stated in the project scopes extracted from the proposal/contract.

• Update the Infrastructure team lead on the project progress and status.

• Implement changes through Change Management Process on system components. Ensure change impact is evaluated, contingency plan and test plans are created to support the change request.

• Build, configure, and rollout new releases through Release Management Process on system components that affect operations. Organize training for new releases where necessary.

• Identify, isolate, resolve, escalate and close incident/problem ticket according to ITSM Incident/Problem Management Process.

• Ensure backup and recovery of system components is carried out, so that critical services can continue in the event of a disaster.

• Perform daily system health check

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Computer Science/Information Technology, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

• At least 3 year(s) of working experience in the related field is required for this position would be advantageous.

• Preferably possess certifications such as Microsoft MCITP, VMWare certified professional or equivalent

• Full-Time position(s) available.

Job Description:

• Support engineers in conducting site acceptance tests, commissioning, and start-up for transformers and switchgear. Knowledge of UPS, Low Voltage/Medium Voltage Variable Speed Drives, and PLC systems is a plus.
• Perform preventive maintenance, breakdown repairs, fault investigation, and troubleshooting of electrical equipment.
• Provide field operations and technical support to customers, helping them identify their needs and offering post-sales service solutions.
• Address on-site repair and maintenance issues, troubleshoot, and effectively resolve technical problems. Deliver field feedback to engineering and manufacturing teams to assist in new product development and improvements to existing products.
• Manage the procurement of spare parts from Supplier

Job Requirements:

• Diploma/ITE in Electrical Engineering or a related field.
• Relevant experience in technical servicing roles.
• Hands-on experience in customer service with the ability to work independently on-site.
• 1 to 2 years of field service experience in a related industry.
• Strong communication & analytical skills.
• Must be ready to travel on business trips

HOW TO APPLY:

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Summary: As a Senior / Security Engineer, you will manage security incidents, conduct threat hunting with SIEM/SOAR tools, and support IT audits. You will oversee vulnerability assessments, security training, and IT security for vessels. You will also lead security projects, provide advisory for projects, and engage with external parties on cyber threats.

Reports to: Senior Security Manager

Role and Responsibilities:

Security Incidents

• Perform investigations of Security incidents.
• Perform threat hunting using SIEM and SOAR tools.
• SIEM/SOAR Tools: Hands-on experience with security monitoring tools like Microsoft Sentinel or other relevant SIEM and SOAR platforms.

Audit and Governance

• Participate in internal and external IT audits.
• Maintain Incident Response Plans and IT policies.
• Perform Vulnerability Assessment and Penetration Testing.
• Conduct Security awareness training for the organization.
• Conduct phishing campaigns.
• Design and review IT/Cyber security architectures.
• Works with external parties (eg; CSA, MPA) on the latest cyber threats and trends.
• Assist in vessel IT security setup, review, audit and remedial actions.

Projects

• Manages Security related projects.
• Acts as Security Advisory for all projects.
• Participate in Request for Proposal and Request for Quote process.

Requirements:

• Degree in Information Security, Computer Science or related disciplines with at least 3 years of relevant experience.
• Knowledgeable in IT Security, Cloud Security, and security standards such as NIST, ISO 27000 and IMO.
• Azure Cloud Security: Strong expertise in Azure Security Center, Microsoft Defender for Cloud, and Azure Policy for real-time cloud threat management and compliance.
• IT Security Management experience of various aspects, e.g. network security, server security, application security, end point security, email security, physical access security, logical access security, etc will be an advantage.
• Knowledge managing network security devices (NextGen Firewalls, IDS, IPS, UTM, NAC, AV, etc.), Windows, Linux, and networking services will be an advantage.
• Preferred Certifications: CCSP (Certified Cloud Security Professional) and Azure Security Engineer Associate are highly preferred, in addition to other certifications such as CISSP, CISM, or CEH.
• Strong hands-on knowledge and experience with security architecture and implementation of Azure Cloud Computing (IaaS, Containers, AKS, DevOps, CI/CD) is mandatory.
• Proficiency in automating security workflows within CI/CD pipelines, focusing on Azure DevOps integration.
• Ideally completed 2 or more of the following certifications: SC-200, SC-300, AZ-500, MS-500 and SC-100.
• Knowledge of Vessel IT will be an advantage.
• Maritime Cybersecurity: Familiarity with maritime cybersecurity standards such as IMO guidelines and TMSA (Tanker Management and Self-Assessment) is a strong advantage for vessel IT security.

Job Description:

• Provide assistance, knowledge and user support in all aspects of IT to ensure the company's business gets maximum benefit from IT systems

• Perform system changes and developments to any of company's systems and applications to agreed standards and timescales.

• Provide basic hardware/software configuration, fault finding and problem resolution.

• Conduct routine maintenance, monitoring and administration on IT systems, hardware, network and business applications.

• Provide video and audio-conferencing system support to end users

• Supporting Group Digital projects/initiatives

• Liaise with external support organisations to ensure their service meets company's business requirements e.g. Service Desk, Telecoms provision and support.

• Answer technical queries and meet operational service levels

• Ensure own work satisfies quality requirements and is documented to departmental standards with all associated databases updated.

• Work as a team member and share knowledge with colleagues.

• Work to agreed personal development plans to broaden the skill range available for all systems and application areas.

• Generate KPI’s and reports to share details on the IT service and IT activities.

• Provide user training, hints and tips and other user assistance as required on systems and applications.

• Provide purchasing advice to and purchase IT equipment on behalf of the business, place orders and manage the stock of IT equipment and spares.

• Be available to support the business during ‘out of core hour’ working time.

• Proactively supports and operates solutions and takes measures to enhance processes and improve service delivery.

• Manage incidents and requests from customers.

Job requirements

• A sound range of IT skills, which need to be kept up to date in line with IT developments in the business.

• Have a basic understanding of the desktop and LAN\WiFi\WAN technical domains, involving familiarity with a wide range of environmental components and support tools.

• Good knowledge of computer hardware, Windows and Mac operating systems, and software applications

• Good understanding of mobile / smart devices, Android and iOS

• Good working knowledge of video conferencing platforms, Zoom, BlueJeans, Skype for Business

• Good working knowledge and experience in managing Office365 and Azure

• To demonstrate the ability to acquire and apply new technical knowledge, be able to work without close supervision.

• Work to high professional and personal standards in a disciplined manner to agreed standards and procedures and maintain appropriate databases and documentation

• The ability to work within a complex technical environment and able to perform tasks and resolve problems on a variety of systems and applications

• The ability to work within a team and be willing to share learning and to learn from others.

• Possession of good verbal and written communication skills.

• Maintain good personal skills and an ability to cope with potential conflict.

QUALIFICATIONS AND EXPERIENCE

• IT / engineer related diploma from polytechnic or degree from university

• Microsoft Certified Systems Engineer (MCSE) or a COMPTIA certification would be beneficial.

• ITIL Foundation V3 would be beneficial

• Thoroughness for investigating and monitoring systems and tenacity for resolving the root cause of problems.

• Familiarity with professional development standards

• Thorough knowledge of IT products and the marketplace

• Maintaining a good network of contacts within IT and within the business

• It is beneficial to have experience in the following technical support areas – Windows operating systems, LAN / WiFi / WAN, Office 365, Office products Outlook, Internet Web Browsers, Skype, Zoom, BlueJeans messaging and conferencing.

PREFERRED SKILLS

• Strong interpersonal, communication and presentation skills.

• Must be analytical, self-driven and proactive in keeping up with new technologies and attention to details.

• Independent worker with initiatives, resourceful, positive attitude, friendly deposition, good team player and able to deliver results within tight deadlines.

• Experience of project management tools and techniques to assist in major Information Technology implementation projects.

• Some on-call or after hours work may be required

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Mon to Fri 8.30am - 5.30pm

This position will be based in Singapore , reporting to procurement manager .

Expected to use their specialized knowledge to maintain an efficient procurement system to supply cost effective materials and services to support the company’s operations.

Job Responsibilities

Procurement Operations and Data Maintenance

• Support the procurement end to end function and other relevant departments and communicate any supply problems which may impact on business operations. Act as an interface between suppliers and relevant departments on purchasing processes and new projects and activities.

• Maintain system integrity of supplier’s info in the ERP system, such as items suppliers connect, purchasing agreements and supplier basic data like MOQ, order multiple, purchasers responsible and supplier maintenance.

Sourcing

• Conduct business review meetings with key stakeholders to assess risk, review future strategies, and identify potential cost down, new programs and improvement opportunities or mitigate the risk.

• Create and review opportunities on alternative materials and or suppliers to meet the business unit objectives in procurement activities and deliver best values and business savings.

• Collaborating with quality team to understand company/s needs as well as work with our existing/new suppliers to determine company strategic alignment.

SNOP

• Understand the trend of raw material / feedstock related, update the information to commercial team, provide analysis on costs, new and cost savings activities. Develop strong partnership with suppliers.

• Monitor market trends, competitor strategies and market suppliers, provide analysis on costs, new and existing and review cost to achieve savings. Establish r/s with suppliers to leverage the needs in term on tight supply situation as well as to be ahead of the market requirement.

• Contribute and communicate the impact on Procurement activities to new business initiatives and projects. Involve in Global procurement project activities.

Vendor Management

• Assess and evaluate supplier’s performance reviews, compiling data relating to supplier performance to enable evaluation.

• To audit supplier supply capability and quality standard when required. Maintain proper documentation in accordance with ISO procedures.

Job Requirements:

• Degree Holders with at least 5 years of working experience in end to end procurement related field in manufacturing environment

• At least 5 year(s) of working experience in related field preferably in petrochemical or polymers related industry

• Possess strong sourcing and negotiation skills.

• Accountable team worker, proactive, problem solving and analytical abilities.

• Strong interpersonal and communication skills to work productively and collaboratively with multi-functional teams to achieve business goals.

• Candidates with good experience in petrochemical raw material commodity price trend analysis will be at advantage

• Familiar with SnOP process would be added point

• This position required to manage overseas vendor from China

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

Objectives of this position:

The objective of the position is to manage the extract/transform/load processes ensuring the data availability.

Responsibilities:

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

•Design, create, modify extract/transform/load (ETL) pipelines in Azure Data Fac-tory ensuring efficient data flow from source to destination.

•Ensure data accuracy and data integrity throughout the ETL processes via data validation, cleansing, deduplication, and error handling to ensure reliable and us-able data being ingested.

•Monitor the ETL processes and optimize ETL pipelines for speed and efficiency, addressing bottlenecks, and ensuring the ETL system can handle the volume, ve-locity, and variety of data.

•Participate in data modeling, designing of the data structures and schema in the data warehouse to optimize query performance and align with business needs.

•Work closely with different departments and IT team to under-stand data requirements and deliver the data infrastructure that supports business goals.

•Provide technical support for ETL systems, troubleshooting issues and ensuring the continuous availability and reliability of data flows.

•Ensure proper documentation of data sources, ETL processes and data architecture.

Requirements:

3 to 5 years of data engineering in Snowflake

3 to 5 years in upstream / downstream Retail industry and/or Supply Chain / Manufacturing domain

Sound Understanding of data quality principles and data governance best practices

Proficiency in data analytics languages like Python, Java, Scala, etc.

Knowledge of big data technologies like Hadoop, Spark and distributed computing frameworks to manage large scale data processing.

Proficient in using version control systems like Git for managing code and configurations.

SnowPro Core Certification and SnowPro Advanced Certification will be advantage

Key Responsibilities:

• Perform routine maintenance on security systems (CCTV, access control, alarms, etc.).
• Provide 24x7 standby support for emergency system issues and breakdowns.
• Troubleshoot and repair security hardware, software, and network components.
• Assist with installation and setup of new security systems.
• Document all maintenance activities and system performance.
• Conduct preventive maintenance to minimize downtime.
• Ensure compliance with safety standards and regulations.

Requirements:

• 2–4 years in maintaining security systems products (CCTV, access control, alarms).
• Hands-on experience with security systems maintenance.
  Knowledge of networking and system configurations.
  Ability to troubleshoot and repair electrical/electronic systems.
• Willing to work 24x7 shifts and be on-call.
• Relevant security or networking certifications (optional).

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description:

• Must be a Diploma/Bachelor's Degree holder.

• Hands-on implementation experience in building full-stack Restful web Applications.

• Experience in the following domain area/Technology/Programming languages

• Communication/Data Protocols: Modbus, OPC UA/AD, IEC 101/104, TCP/IP, SFTP, MQTT, AMQP

• Programming languages: JavaScript, Python, C/C++, SQL

• Experience in Linux, Docker, PostgreSQL, And Firewall management

• Experience in Code Management and Deployment

• Certified in Microsoft Technologies will be an added advantage

• Knowledge in Azure Devops, Azure IOT and Azure sphere will be an added advantage.

Roles and Responsibilities:

• The candidate will be responsible for designing and implementing data acquisition solutions and systems that meet the requirements of our clients.

• The successful candidate will be expected to have strong problem-solving skills and be able to troubleshoot and debug complex issues.

• The candidate will also be responsible for developing and maintaining documentation for solutions, including design specifications and test plans.

• Company bus pickup from Ang Mo Kio, Jurong East, Boon Lay
• CNC Manufacturing
• MNC (Good remuneration)

1. Assistant Production Engineer (Mechanical)

Job Responsibilities:

• Perform basic and advanced machine assembly works
• Develop mechanical testing jigs & fixtures and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine mechanical setting and inspection checks according to YS standard
• Able to troubleshoot and resolve machine any kind of mechanical non conformance
• Perform machine final mechanical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Mechanical) required
• 0-3 years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, PowerPoint and Outlook)
• Knowledge of drawing software (SolidWorks, Unigraphic, etc) is added advantage

2. Assistant Production Engineer (Electrical)

Job Responsibilities:

• Perform basic and advanced machine electrical wiring works
• Develop electrical testing jigs and perform testing and validation of machines
• Lead the production team to strictly adhere to production schedule and same time improving the manufacturing process to improve quality, cost, and productivity.
• Creates, implements, and monitors KPI indicators on product quality and section capability
• Provide shop floor feedback to Production Engineering and D&D Department
• Assist the Production Manager to provide quality, cost effective and efficient support for launching of new machine models
• Perform machine pre & post machine power ON inspection checks, machine parameter settings, testing and inspection according to standard
• Able to troubleshoot and resolve machine electrical non conformance
• Perform machine final electrical inspection and adjustments for any defects to maintain high level of quality
• Prepare reports on productivity, quality, claims, etc
• Work with engineering and other departments to improve assembly processes
• Monitor the serviceability of measuring electrical instruments or jigs and fixtures and reporting to Supervisor or Manager any non-compliance condition
• Maintain accurate records of inspection result at each electrical process

Job Requirements:

• Bachelor Degree or Min Diploma (Electrical) required
• 0-3years working in a machine assembly environment
• A good track record of supporting the department achieving KPI
• Strong understanding of 5S and HSE knowledge
• Able to work effectively in a fast and ever-changing stressful environment
• Maintain good Quality standards, 5S and safety discipline
• Well verse in Microsoft office (Excel, Words, Powerpoint and Outlook)
• Knowledge of drawing software(Solidworks, Unigraphic, etc) is added advantage

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Ding Xin Er
EA Personnel Reg No: R22106669