- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

- Excellent written and oral communication skills in both English and Mandarin.

We regret that only the shortlisted candidates will be notified

The Project Engineer will be responsible for planning, designing, and overseeing the installation of medical devices at various OR, ICU, CSSD and other healthcare project sites. This role requires technical expertise, project management skills, and the ability to collaborate with various stakeholders to ensure successful project execution.

Key Responsibilities:

• Responsible for overall planning and implementation to ensure timely delivery and meet the customer's requirements.
• Coordinate with site supervisors and project managers to ensure project alignment.
• Attend project meetings with the customer, main contractor and other parties.
• Prepare the monthly project documents: project progress report, project claims, minutes of meeting…
• Assist the project manager to collate the necessary project documents: scope of works, project timeline, method of statement, risk assessment, T&C checklists, OMM and material for submission.
• Work with company design engineer to prepare the project drawings for submission (equipment setting out, utility requirement, equipment elevation views…).
• Coordination of the company internal resources (project, service, logistics…) and external parties (sub contractors, main contract) to ensure smooth project implementation.
• Conduct side surveys, technical assessments and feasibility studies.
• Monitor project progress and adjust plans as necessary.
• Ensure compliance with safety regulations, quality standards and company installation requirements.
• Provide technical support and troubleshooting during installation.

Requirements:

• Bachelor’s degree in Engineering, Construction Management, or related field.
• WSQ Workplace Safety and Health Management in Construction Industry - WSHMCI (Formerly known as WSQ SCWWSH, MOM BCSS)
• Experience in project engineering, preferably in the medical device industry.
• Excellent communication and teamwork abilities.
• Strong analytical and problem-solving skills.
• Proficiency in project management software and tools.

About the Role:
Are you passionate about ensuring the delivery of high-quality, impactful solutions? As a QA Engineer, you’ll play a critical role in transforming personalized healthcare by ensuring our cutting-edge AI and telehealth solutions meet the highest standards. Working closely with our Head of Engineering and a dynamic team, you’ll design and execute rigorous testing processes to support the development of game-changing healthcare technology for Asia.

This isn’t just about testing—it’s about building the future of healthcare. From ensuring the scalability of AI-driven relationship management to verifying personalized health insights and tailored treatments, you’ll help redefine what’s possible in telehealth.

Why Join Us?
This is more than just a job—it’s a mission. While there may be trade-offs in compensation, we offer the chance to be part of something transformative. You’ll take ownership of QA processes for impactful projects, working with a passionate team dedicated to using technology and innovation to change lives.

What You’ll Do:

• Review quality specifications and technical design documents to provide timely and meaningful feedback.
• Develop and maintain detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate quality testing activities across our engineering projects.
• Design and execute manual and automated test cases to validate AI and telehealth solutions.
• Identify, document, and track software defects to resolution, ensuring timely fixes.
• Collaborate with developers and the Head of Engineering to ensure seamless integration of QA processes into the development lifecycle.
• Continuously improve QA processes, tools, and techniques to support scalable, high-quality solutions.

Who You Are:

• You are passionate about delivering high-quality solutions that make a meaningful difference.
• You have experience in developing and executing manual and automated test cases.
• You’re skilled in reviewing technical design documents and creating test plans and cases.
• You’re familiar with QA tools, methodologies, and frameworks.
• You thrive in fast-paced, high-growth environments and enjoy building solutions from scratch.
• You have strong analytical and problem-solving skills and are detail-oriented.
• Experience in healthcare data or applications is a plus but not mandatory.

What We Offer:

• The chance to work on meaningful projects that transform healthcare in Asia.
• A collaborative and innovative team culture where your contributions matter.
• Ownership over impactful QA projects with the freedom to shape testing strategies.
• Flexibility to work remotely with occasional travel across Asia to collaborate with the team.
• An opportunity to join a mission-driven team passionate about making a real difference in healthcare.

Why Join Us?

• Impact: Play a pivotal role in ensuring the quality of transformative healthcare solutions.
• Ownership: Full responsibility over QA processes and the freedom to shape testing methodologies.
• Flexibility: Work remotely, with opportunities for travel across Asia.
• Mission-Driven: Join a team passionate about changing lives through technology and innovation.

Join us, and let’s redefine healthcare together.

• Overall accountable and responsible for delivery of testing services one or more applications and/or projects for Retail Banking
• Manage and oversee the day-to-day delivery of test services by Bank appointed vendors in the conduct of testing ; Ensure communications with country team for testing and status reporting, conversing in Vietnamese language
• Works with the testing service providers and other stakeholders both group (SG) and country (Vietnam) to review, provide feedback and sign off on the test strategy, test plans and other test service providers’ artefacts for the testing service delivery.
• Coordinates with the Test Governance team to ensure adoption of testing methods, standards and tools, and to coordinate any health checks or audits.
• Ensures that any changes to the scope of services are communicated to the respective test service providers and the impact is factored into the plan.
• Engages with various stakeholders (including but not limited to, application, security, infrastructure, business), testing service providers to ensure testing services meet the banks’ objectives and demand.
• Act as the first point of escalation for any issues raised by stakeholders, testing service providers.
• Quantify, manage, track and report test related statuses, SLA and KPIs, and ensure that defined testing transformation SLA and KPI targets are met for the portfolio accountable.
• Drive and collaborate with all stakeholders and test service providers to plan all testing related deliveries for the portfolio accountable.
• Participate and contribute in forums, as required, to drive testing transformation and innovation.
• Works closely with the Test Engineering Lead to provide inputs around domain specific test engineering requirements and ensure that they are met.
• Establishes and maintains effective working relationships with the Vendor Test Managers/Test Leads for the respective domains.
• Engages stakeholder communities to get their feedback on testing service delivery and identify improvement opportunities to be fed back to the Test CoE team.

Requirements:

• Bachelor’s Degree or master’s degree in computer engineering or related field.
• Must have oral and written communication abilities for both English and Vietnamese languages
• Proven working experience in test delivery or equivalent role with at least 10 to 15 years relevant experience in large and complex organisations preferably in Banking and Finance and at least 5 years’ senior manager experience in testing.
• Extensive experience in managing end to end delivery of testing services from multiple vendor test service providers.
• Good knowledge in managing data migration projects including conversiontesting.

C2D Solutions Pte Ltd is Hiring!!!

Only Singaporean and SPR need to apply!

Web: www.c2d.com.sg

Tel: +65 6392 2949

Job Description: Mechanical & Electrical Engineer

Company Overview

• C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimisation.
• We were established in 2012 and operates as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions.
• We have a team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers to ensure first-rate engineering solutions for our clients.
• We have grown over the years and are continuously increasing our market presence and are seeking like-minded individuals to join our team as a Mechanical & Electrical Engineer.

Job Responsibilities:

• Design and commissioning of building mechanical & electrical systems including, fire protection, air-conditioning & mechanical ventilation, smoke control systems, power distribution systems, lighting systems, etc.
• Perform Computational Fluid Dynamics simulations to design & optimize ventilation, pollution control and fire & smoke control systems.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements.
• Participate in Testing & Commissioning phase of completed mechanical & electrical installations.
• Appointed engineers will be attached to Senior Engineers who will provide Internal Training and Supervision.

Why you should apply:

1. We are a progressive company that place equal emphasis on personal and professional growth.
2. Appointed engineers with interest and potential will beoffered sponsorship to continue professional upgrading tofurther their engineering career development.
3. Career development includes the opportunity to register as aProfessional Engineer (PE) and/or Fire Safety Engineer (FSE).
4. Opportunities to work on dynamic and impactful buildingprojects
5. Our projects’ portfolio includes pharmaceutical & semi-conductor manufacturing facilities, air & land infra-structurefacilities, hospitality & conventions facilities, etc.

C2D Solutions is a premium holistic solutions provider with strong knowledge and experience in vast fields of engineering. As a trusted consultant, we aim to provide invaluable integrated solutions during design and optimization. We were establishedin 2012 and operate as a licensed corporation under the Professional Engineers Act. We provide holistic solutions in the field of Fire Safety Engineering, M&E Consultancy, Computational Engineering Solutions. Our team of dedicated Professional Engineers, Fire Safety Engineers and supporting Engineers ensure first-rate engineering solutions for our clients. Since 2012 we have grown exponentially and are continuously increasing our market presence and are seeking like-minded individuals with mechanical engineering or building services degrees to join our team as a Mechanical & Electrical Engineer.

Requirements

As a Data Science Engineer at Micron, you will employ techniques and theories drawn from areas of mathematics, statistics, semiconductor physics, materials science, and information technology to uncover patterns in data from which predictive models, actionable insights, and solutions can be developed.

You will interact with experienced Data Scientists, Data Engineers, Business Areas Engineers, and UX teams to identify questions and issues for data analysis projects and improvement of existing tools. In this position, you will help develop software programs, algorithms and/or automated processes to cleanse, integrate, and evaluate large datasets from multiple disparate sources. There will be significant opportunities to perform exploratory and new solution development activities.

Responsibilities include, but not limited to:

• Strong desire to grow a career as a Data Scientist in highly automated industrial manufacturing doing analysis and machine learning on terabytes and petabytes of diverse datasets.
• Experience in the areas: statistical modeling, feature extraction and analysis, supervised/unsupervised/semi-supervised learning. Exposure to the semiconductor industry is a plus but not a requirement.
• Ability to extract data from different databases via SQL and other query languages and applying data cleansing, outlier identification, and missing data techniques.
• Strong software development skills.
• Strong verbal and written communication skills.
• Experience with or desire to learn:
• Machine learning and other advanced analytical methods
• Fluency in Python and/or R
• pySpark and/or SparkR and/or SparklyR
• Hadoop (Hive, Spark, HBase)
• Teradata and/or another SQL databases
• Tensorflow, and/or other statistical software including scripting capability for automating analyses
• SSIS, ETL
• Javascript, AngularJS 2.0, Tableau
• Experience working with time-series data, images, semi-supervised learning, and data with frequently changing distributions is a plus
• Experience working with Manufacturing Execution Systems (MES) is a plus
• Existing papers from CVPR, NIPS, ICML, KDD, and other key conferences are plus, but this is not a research position

Designs, develops and programs methods, processes, and systems to consolidate and analyze unstructured, diverse “big data” sources to generate actionable insights and solutions for client services and product enhancement. Interacts with product and service teams to identify questions and issues for data analysis and experiments. Develops and codes software programs, algorithms and automated processes to cleanse, integrate and evaluate large datasets from multiple disparate sources. Identifies meaningful insights from large data and metadata sources; interprets and communicates insights and findings from analysis and experiments to product, service, and business managers.

• Hand on install automation machines & systems with meeting planned project & production schedule.
• Maintain and suggest improvement for existing automated production lines.
• Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.
• Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.
• Coordinate with internal team (Sales, Quality, Project, Production, maintenance) and external supplier to make projects successful.
• Participate of root cause analysis of product failure within cross functional team.
• Prepare machines preventive maintenance check list and train operation & maintenance staffs.
• Monitor automation system performance and provide support & perform service production automation line when necessary.
• Any other duties as and when assigned.
• Adhere to workplace health and safety. Abide by all EHS policies and procedures

Requirements

• Diploma of Engineering in Automation / Mechanical /Mechatronics / or equivalent. Fresh graduates are welcome, on job training will be provided.
• ITE with serval years’ experience are welcome.
• Experience in automation machine design are advantages.
• Hands-on experience of electrical and mechanical assembly & installation
• Knowledge on Mechanical/Mechatronics/Electrical components.
• IT skills (MS Office)
• Communicate well in English

Position: Site Engineer cum Quantity Surveyor

About Us:

ADT Builder Pte Ltd specializes in constructing premium landed houses and Good good-class bungalow (GCB) projects, including those with basements. As the main contractor, we pride ourselves on delivering high-quality construction projects with precision and excellence.

Job Description:

We are seeking a dedicated Site Engineer cum Quantity Surveyor to join our team. The successful candidate will play a pivotal role in overseeing on-site construction activities, managing project costs, and ensuring the delivery of projects on time and within budget.

Key Responsibilities:

• Site Supervision:

• Oversee and manage daily site operations to ensure quality standards and project timelines are met.

• Coordinate with subcontractors, suppliers, and consultants to resolve technical and site issues.

• Conduct site inspections and ensure compliance with safety regulations.

• Quantity Surveying:

• Prepare and manage project cost estimates, budgets, and cost control.

• Measure and value construction work for progress claims and final accounts.

• Evaluate and prepare variations and extension of time claims.

• Manage procurement processes, including tender evaluations and material take-offs.

• Documentation & Reporting:

• Maintain accurate records, including site diaries, progress reports, and material records.

• Prepare and submit progress claims, invoices, and other contractual documents.

• Liaise with clients, consultants, and authorities on project updates and requirements.

Requirements:

• Diploma or Degree in Civil Engineering, Quantity Surveying, or related fields.

• 6 years of experience in site supervision and quantity surveying, preferably in residential or landed housing projects.

• Strong knowledge of construction methods, materials, and regulations in Singapore.

• Proficient in AutoCAD, Microsoft Office, and quantity surveying software.

• Excellent organizational, communication, and problem-solving skills.

• Ability to work independently and as part of a team.

What We Offer:

• Competitive salary package

• Opportunities for career growth and professional development

• Exposure to high-end residential projects

• A collaborative and supportive work environment

How to Apply:

Please send your detailed resume, including your expected salary and earliest availability, to [email protected]

Join us in building the future of high-quality residential construction. Apply today!

Is there a Zenika in you?

Let’s talk skills and passion first.

You believe that clean code is more than just writing functional software. With a strong grasp of Agile, DevOps, and a passion for exploring the latest technologies, you're always eager to experiment, learn, and share. Platforms like GitHub, StackOverflow, and Twitter are part of your daily toolkit, and you have a strong commitment to sustainable tech practices. Knowledge-sharing is in your DNA—you might even be active in open-source communities or attend tech events like TechnoZaure.

Your Role as a Zenika Consultant

As a consultant, you’ll be deployed to client projects, using your expertise to solve complex problems and drive innovation. You’ll collaborate with client teams to:

• Develop clean, efficient, and scalable code in languages like Python (Django/Flask), JavaScript (React/Node.js), Java (Spring Boot), or TypeScript (Angular).
• Utilize SDLC and CI/CD tools such as Git, GitLab, Jenkins, Bitbucket, and CircleCI to streamline development pipelines.
• Work with SQL/NoSQL databases (MySQL, PostgreSQL, MongoDB, Redis) to manage and optimize data workflows.
• Leverage cloud platforms (AWS, Azure, GCP) and containerization tools like Docker and Kubernetes for deployment and scalability.
• Automate infrastructure and deployments using Terraform, Ansible, and CloudFormation.
• Apply testing frameworks (Jest, PyTest, JUnit) and TDD/BDD principles to ensure code quality.
• Collaborate with product and design teams to translate requirements into technical solutions, while ensuring a seamless user experience.

About Zenika

Founded by developer Carl Azoury, Zenika is a consultancy built on the principles of community, transparency, and craftsmanship. We are passionate technophiles advising clients with deep expertise in open-source technologies and modern tech solutions.

Why Join Zenika?

• Work with a global client base across 11 locations, gaining experience across diverse industries.
• Benefit from over 28,000 Zenika-led training sessions to continually grow your skills.
• Collaborate with tech giants like Google Cloud, Microsoft, and Scrum.org, and contribute to open-source projects or participate in industry conferences.
• Connect with experts and peers through our annual TechnoZaures events, where you can share, learn, and innovate together.

Ready to code your story with us? Apply NOW!

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Responsibilities

· Field service work on highly complex equipment which involves troubleshooting, diagnostic and repairing at customer wafer fab in local and overseas facility.

· Knowledge of Laser and optics is beneficial.

· Prepare field service reports on work activity and provide customer with supporting functions on re-occurring problems.

· Training and OJT will be provided.

Requirements

· Bachelor’s Degree or Diploma in Mechanical/Mechatronics/Electrical/Electronics Engineering

· Good interpersonal/communication skills in understanding customer needs.

· Shows initiative and can work independently.

· Able to work overtime and travel at short notice when required.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Responsibilities:

• Provide day to day EHS support to meet the Singapore EHS requirements, Responsible Business Alliance (RBA), Customer Requirements, KLA EHS policy and program.
• Partner with and manufacturing leads, supervisors, managers, and team leaders in incident investigations, corrective action deployment, and effectiveness evaluations.
• Ensure the functionality of the factory site safety committee and company emergency response team (CERT).
• Be appointed as Workplace Safety & Health Officer and Fire Safety Manager.
• Implement EHS management system / policy per ISO45001 & ISO14001, RBA requirements, and local safety regulations.
• Organize and conduct regular new hire safety orientation and other EHS trainings according to the training plan and company needs.
• Conduct regular and periodic site EHS inspections, audits and risk assessment, incident investigation, etc.
• Collaborate with field service operations and others. Provide assistance, support and technical expertise on field service and install operations when needed.
• Promote incorporation of EHS into business planning and assist with establishing EHS as a business and management performance measure.
• Assist with the implementation of business continuity plan, emergency response plan, company audit program and reviewing EHS performance and work practices against statutory and company requirements.
• Track, arrange and timely renew all equipment, building and related licenses ensuring compliance to governmental regulations.
• Provide support to our ESG (sustainability) efforts for the sites under your span of control.

Qualifications

1. Bachelor's Level Degree, relevant qualifications in Safety, Environmental, Risk Management, Occupational Hygiene or equivalent.
2. Holding of Singapore Workplace Safety & Health Officer and Fire Safety Manager certifications.
3. 5+ years or more experience in a large manufacturing facility.
4. Experience in RBA, Business Continuity Plan, ISO14001 & ISO45001 management system, FM Loss Prevention Program, bizSAFE program, building construction safety, etc.
5. Good written and verbal communication skills, and interpersonal skills. Fluency in English languages.

- To monitor and supervise work progression according to shop drawings, method statements, material and samples.

- To liaise and work with relevant authorities on shop drawings, materials and samples.

- Review and align Fire protection design drawings to ensure compliance with design specifications and guidelines.

- Knowledge in M&E and able to Identify discrepancies between M&E, structural, ID, architectural and client provisions.

- Manage and execute project as per the schedule.

- To attend meeting with contractors to address issues and update progress.

- Study and reviewing of drawings, specifications for compliance.

- Allocate work to supervisors and ensure jobs are correctly and properly achieved within standards and SOP.

- Plan and lead testing and commissioning of the fire protection systems.

- Liaise with regulatory bodies, fire departments, and other stakeholders to ensure compliance with relevant codes and regulations.

- Follow up with site / authority inspections, defects rectifications of the fire protection works.

- Plan and prepare OMM, training, As-Builts drawings for handing over of completed fire protection systems to client.

- Follow up with maintenance of fire protection systems during DLP.

- Ensure that all project documentation is accurate, complete, and up-to-date.

Job Requirements

-To assist the Project Manager on overall site works related to Fire Protection and this shall be in line with safety requirements.

- Hands-on and technical assistance for fire protection systems services, programming, testing and commission for the projects.

- Design and engineering of fire protection system.

- Supervision of work, liaise with sub-contractors, site supervisors, foremen and workers regarding the overall fire protection system.

- Attending to all site meetings with owner, consultants on all matters relating to the project operation and co-ordination

Requirements:

- Min 3 years similar capacity experience in fire protection Industry

- Knowledge of AutoCAD added Advantage

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage

- The Solar Photovoltaic (PV) and Energy Storage Systems (ESS) Asset Maintenance Engineer leads in the operations and maintenance of solar PV ,Hot water and ESS

- Establishes new methods to optimise system performance and improve maintenance processes.

- He/She prepares cost estimates for maintenance and verifies claims on repair works.

- He/She occasionally works outdoors at solar PV, Hot water and ESS sites.

- He/She is systematic and has good problem-solving skills in leading the operations and maintenance works

- He/She has good leadership and communication skills to engage his/her stakeholders.

- He/She is also service-oriented and ensures customers are satisfied with the services provided.

- He/She to Create Maintenance Schedules

Key Responsibilities:

• Liaise with Solutions team to understand systems design
• Perform installation, configuration and maintenance of network devices and AD server / management server on-site
• Assist Project Managers and Engineers to prepare systems related diagram for the project implementation
• Ensure systems design conforms to contract and technical requirements
• Engage with back line support and/or with vendor’s support to diagnose and rectify technical problems to effectively resolve project implementation issues
• Attend to preventive and corrective maintenance to backend system
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Skills in relating to and servicing the customers with a win-win mind set
• Skills in troubleshooting technical problems related to servers, routers, switches, and IoT devices.
• Good knowledge of the security and surveillance solutions landscape and industry trends
• Knowledge on Microsoft Clustering, Active Directory, Agent VI, Milestone, VMware and IT Security is required
• Knowledge of CentOS, Ubuntu, VMware (ESXi), Firewall, Networking, and Windows Server OS
• Proficient in Active Directory, Certificate Services, Virtualization technology, and cyber security is required
• Skills in planning and scheduling
• Professional Certificate in MCSE and CISSP would be an advantage

Requirements:

• Minimum Degree in Computer Engineering or related discipline
• At least 3 years’ experience in a similar capacity
• Experience in installation on Server / Client configuration, Network Storage and IT Network

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

PRODUCTION ENGINEER/ EXECUTIVE ($3,500 - $4,000)

LOCATION: PANDAN RESERVOIR

WORKING TIMING: 7.30AM-5.00PM (5DAYS WORK WEEK)

1. We need a engineer or assistant engineer with mechanical educational background or years of experience hand on mechanical troubleshooting.

2. We can also search for experience technician that want to upgrade as assistant engineer or engineer.

JOB DUTIES & RESPONSIBLITIES:

1. Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.

2. Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.

3. Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.

4. Work with HR Department and assure that employee grievances are addressed in a timely fashion.

5. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.

6. Maintain and ensure work safety and practices. Also continually improve safety record by addressing both physical safety issues and employee safety attitudes.

7. Maintain and improve housekeeping in all areas.

8. Evaluate, Train and Maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.

9. Ensure on time submission of overtime record to HR Dept for computation of monthly salary.

10. Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.

11. Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.

12. Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.

13. Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.

14. Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.

15. Assist in hiring of production personnel.

16. Maintain and update operating manuals for all the manufacturing equipment and facilities.

17. Maintain and update operating training manuals for all manufacturing processes.

18. Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Skill/Experience

* Minimum 2-3 years working experience in manufacturing environment.

* NITEC/ HIGHER NITEC / DIPOLMA IN M&E OR MECHANICAL

* Able to supervise and lead the subordinates.

* Willing to work after working hour or during non-working days.

* Able to work under pressure.

* Computer literate.

* Knowledge in ISO is an advantage.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei

EA Registered no.: R1543992

Recruit Now Singapore Pte Ltd

EA License no.: 21C0845

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

• Possess experience in Linux/Unix and worked in a 24/7 shifting schedule, supporting Tier 1 banks during crucial exchange times.
• Knowledgeable in the FIX protocol and proficient in monitoring tools like ITRS, Zenoss, and Grafana.
• Organize upgrades and maintenance, minimizing disruptions.
• Follow incident handling processes, including initial response, investigation, resolution, and post-incident review.
• Ensure effective communication and coordinated with technical staff, vendors, and stakeholders.

Requirement:

• Minimum Degree in computer Science or related.
• Must have worked in production support enviroment supporting banks for 5+ years.
• 5+ years of exeperiene in Linux/Unix
• Must have worked in a 24/7 rotating shift schedule.

Job Responsibilities:

1. Produce and manage technical documents, including writing technical cases, monthly technical reports, updating PDI technical files, and managing inventory vehicle technical documents.
2. Manage market technical operations, including managing and improving service provider technical managers, internal training management, regular assessment management, technical capability evaluation and improvement, market survey analysis, localization promotion, and the implementation of company technical management regulations.
3. Provide claims support, including promoting technical determination of fault responsibility and pre-review of claim forms.
4. Follow up on technical projects, including managing and supporting technical projects and promoting market-oriented projects.
5. Manage quality, including collecting and organizing market issues and following up on difficult problems with relevant departments at headquarters.

Recruitment Requirements:

• Minimum Degree in relevant field such as Electrical Engineer..
• At least 3 years of experience in vehicle maintenance or and after-sales technical management.
• Strong interpersonal communication and coordination skills.
• Preferable with class 3 driving licece.
• Proficiency in English or Chinese in order to liaise with HQ colleague from China.

About us

Since the 1930s, the way we commute, socialise and even how we make payments have changed, and yet our fundamental approach to the healthcare system hasn’t.

At Ordinary Folk, we’re reimagining the building blocks of healthcare, through Noah, Zoey, and Cyrus. Noah allows men to receive remote diagnosis and treatment across varying areas of care. Through Zoey, women’s sexual wellness and fertility journeys are supported with thoughtful products and services. Cyrus, our modern logistics fleet makes ultra fast deliveries for medication with the help of AI.

Job description

As a Full-stack Engineer at Ordinary Folk, you’ll help to:

• Developing and directing software system validation and testing methods.
• Directing our software programming initiatives
• Overseeing the development of documentation.
• Working closely with clients and cross-functional departments to communicate project statuses and proposals.
• Analyzing data to effectively coordinate the installation of new systems or the modification of existing systems.
• Managing the software development lifecycle.
• Monitoring system performance.
• Communicating key project data to team members and building cohesion among teams.
• Developing and executing project plans.
• Applying mathematics, and statistics to problem-solving initiatives.
• Applying best practices and standard operating procedures.
• Creating innovative solutions to meet our company’s technical needs.
• Testing new software and fixing bugs.
• Shaping the future of our systems.

What we’re looking for from you

• Strong knowledge of HTML, CSS, and Javascript/Typescript
• Proficiency with React for client-side development and Node.js for backend development
• Experience with relational database (e.g. PostgreSQL)
• Experience in production development of RESTful APIs
• eCommerce experience. You have experience building eCommerce platforms (e.g. customer
• management, transactions, order, invoicing) and have the requisite skills to meet the technical demands.
• Startup experience. You will have a huge passion for startups and fast-growing teams. You will have been part of the journey of a successful startup.

Why join Ordinary Folk?

Our mission is to revolutionise the way people access medical treatment.

We’ve built brands tailored to the differing needs of people across diverse Asian cities, and delivered healthcare solutions the modern way — online and to your doorstep.

Working with medical professionals in each country, who are armed with decades of expertise in their specialised fields, allows us to tailor treatment plans that work for the broad range of individual needs for their local populations.

Looking for the highlights?

• We’re one of the fastest-growing healthcare companies in Asia.
• You’ll be working alongside team members who’ve joined us from companies like BBH, Grab, Unilever, Ogilvy and IDEO.
• Join a team of 40 on the ground floor of an exciting start-up ready to blast off.
• Employee equity scheme giving you a share in the company and the work we do.
• A development allowance so you can upskill yourself and your career.

What is working at Ordinary Folk like?

We’re not your stereotypical healthcare company. We’re a bunch of creatives, entrepreneurs and tech-driven individuals from a wide range of cultural backgrounds – all with a focus on delivering better health to people.

Our team is based around Asia and as long as you’re between GMT+7 and GMT+11, you can work wherever you want. We also hate overbearing managers – at Ordinary Folk, the best ideas, not the manager’s ideas, win.

Life moves pretty fast around here because speed and execution matter more than anything else. But we believe that the A+ players at Ordinary Folk need and deserve the freedom to contribute their best to the company so they can help keep our trajectory on the up.

Contact and apply to [email protected]

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Responsibilities:

· Coordinating, planning and conducting the project plan

· Project formulation and monitoring progress and schedule

· Effective communication and co-ordination between project participants

· Attend site meeting, inspect, monitor and report project progress.

· Submit and update monthly project status

· Perform other duties or tasks as assigned by immediate superior or Project Manager

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 3 years relevant working experience as Project Engineer in main contractor office

· Proficient in MS Office Word, Excel and Project Scheduling software

· Bilingual with good communication skills

1. The role of Coordination Engineer shall encompass collaboration and chair meeting with all stakeholders
2. T serve as the primary point of contact for HQ, clients, vendors, and project teams.
3. To facilitate regular communication and meetings to keep all stakeholders informed of project progress.
4. To Identify and address any issues or obstacles that may impact project timelines or deliverables.
5. To assist in collaborate with relevant teams to resolve technical or logistical challenges, if possible.
6. To foster collaboration among HQ, stakeholders, PTO, LTA, and subcontractors.

Qualifications & Work Experience

• Bachelor’s degree in project management/ Electronic & Electrical, with 5 years of relevant experience, or Diploma in Mechanical, Electronic, Electrical Engineering with 10 years related field of experience.
• Excellent organizational and multitasking skills, with track record of managing project.
• Strong interpersonal and communication skills, capable of collaborating effectively with all various stakeholders.
• Ability to work under pressure and meet tight deadlines while maintaining high standards of quality.
• Problem-solving and decision-making.
• Risk assessment and mitigation.
• Attention to detail and quality assurance.
• Customer relationship management.