Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ HDB experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description:

Facilities Operations and Management

• Lead the planning, be hands-on construction supervision and maintenance of facilities, equipment, and buildings
• Design and lifecycle management of all facilities and equipment
• Maintain documentation related to electrical systems, including schematics and maintenance records
• Develop and maintain workspace (clean room, lab & offices) that builds a work environment enabling collaboration, innovation, productivity, and destination of choice
• Ensure high level of service for transportation, pantry, and other services
• Lead all aspects of building space allocation and layout, communication services and facilities expansion
• Lead Singapore office access and security control in partnership with Asia Regional Security lead
• Ensure all facilities meet established environmental and safety control requirements in partnership with Asia EHS team
• Collaborate with the business continuity team on disaster preparedness policies and procedures
• Manage the portfolio KPIs, space utilization rate and budget spend
• Lead and implement Integrated Facility Management outsourced for Singapore

Space Planning and Projects

• Develop space roadmaps for cleanroom, lab, and offices to meet business needs
• Lead site planning and design for new building construction, remodels, cleanroom, and lab installs, capacity planning, space planning, and engineering
• Develop and manage budget/timeline for projects

Real Estate Management

• Drive proactive planning and management of the Singapore real estate portfolio and leases
• Manage the site selection, negotiate, and execute lease agreements

Vendor Management

• Lead oversight of the performance of service providers, contractors, vendors, and suppliers
• Partner with Indirect Procurement to select and manage vendors for construction and operations based on procurement guidelines and standards

Data Analytics

• Compile market data, forecast, budget, and other analysis to support real estate investment opportunities
• Create and benchmark industrial peers’ key operational and service levels KPIs

Qualifications

• Bachelor's Level Degree with at least 5 years of experience (preferably in Electrical)
• Possess Singapore Certified Energy Manager (SCEM)
• Strong understanding of energy auditing, energy modelling, and energy efficiency technologies
• Demonstrated ability to partner effectively with business groups and align with company’s goals and objectives
• Deep understanding of real estate and facilities ecosystem: strategic sourcing, supply chain management, people management, facilities management, lease transaction management, design, construction, and project management
• Experience in leading country level network of sites, including knowledge in Singapore and international commercial real estate markets and regulations from proposal to build.
• Held position(s) in relevant or manufacturing environments
• Experience in operation and maintenance of transformers, LV/MV switchboards, UPS, motors, frequency converters, and power distribution
• Ability to study protection circuits, single line drawings, and control circuits
• Knowledge of low voltage systems including fire protection
• Compulsory knowledge of HV, LV, transformers, switchboards, and breakers
• Manage projects related to electrical infrastructure upgrades and improvements
• Experience in project installation of electrical distribution systems
• Strong communication and presentation skills with senior leaders
• Proficient with organizing and using data and financial analyses support and influence decision-making
• Ability to travel up to 30% of the time

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in structural steel works/ precast RC works/ Building/ MRT/ LTA is an advantage
• More than 8-years of site experience in Construction sector.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Mission:

- Develop Go to Market Strategies on the IDEC’s focused products for specific vertical markets in the APAC Region

- Meet the growth target of product group in the APAC

- Develop sales across APAC & Middle East as per assigned targets

- Assist distribution channel during customer visits to conduct design-in opportunity

- Regular visits to direct account/customers to maximize IDEC opportunities

- Generate NBO (New Business Opportunities)

- Maintain a strong level of relationship with Distributors & Direct Accounts

- Following the group's pricing and sales policies

- Provide timely and accurate weekly and monthly Sales report to the sales management

- Maintain and share competitive intelligence

- provide customers feedback, market trend and new product development ideas to the sales/product management

Main Tasks:

- Tracking product performance against target

- Provide go to market strategy and for successful penetration into the focused vertical markets, identifying suitable portfolio for specific vertical markets

- Sales management and mentoring of distributors in assigned territories to generate NBOs and achieve budget

- Periodic visits to the distributors to conduct business reviews and regular joint customer visits

- Raise and follow up special price enquiries, prepare quotations with objective to maximize margin

- Assist distributors during exhibitions both at Marcom level and physical presence during the event

- Finding new prospective distributors and customers when needed

- Analyzing feedback from various channels and proposal of actions to Management

- Collect and feedback any competition information

- Prepare and Manage Sales Forecast quarterly/yearly in conjunction with Company Business Plan

- Work with colleagues and managers to understand & promote Company strategy & objectives

- Presentation of periodic reports with activity analysis

- Any other reasonably duties define by direct manager

Key Performance Indicators:

- Achievement of company turnover objective

- Achievement of personal turnover objective

- Achievement of Product and Vertical market growth target

- Achievement of NBO generation & win (number to be defined)

Territory Focus: APAC and Middle East. Region to be defined (e.g. Singapore, Malaysia, Indonesia, Vietnam, Philippines, S. Korea, Australia)

Candidate Profile:

- Bachelor’s Degree in electrical engineering is preferred (not mandatory)

- Minimum of 4 years of experience in OEM or distribution sales, product management

- Experience working with multiple distribution channels

- Ability to translate customer requirements into workable solutions

- Strong oral and written communications skills

- Strong technical aptitude & the ability to understand & communicate technical information

- Strong organizational skills & the ability to coordinate multiple projects simultaneously

- Able to travel overseas as required

- Good attention to detail and strong follow-up skills

- Ability to analyse sales results, interpret data and prepare action plan accordingly

- Knowledge of Microsoft Word, Excel and PowerPoint

- Experience with Salesforce.com is a plus (not mandatory)

- Posess a driving licence and car is desired (not mandatory)

Attractive package based on fixed salary + Variable bonus based on KPI’s achievement + Local travel allowance + Telephone allowance.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

Permanent, Singapore-based Electronics Service/Application Engineer for Electronics Test and Measurement Instruments. 5 days week (9.00 AM to 6.00 PM) Located near Lavender MRT station.

· Perform hands-on troubleshooting, service and repairs either in house or on-site.

· Provide on-site implementation, commissioning, testing and system integration support.

· On-the-job training is provided.

· Support Existing and New Project

· Any other duties as assign by superior and management

Job Requirements:

· ITE /NiTEC, Diploma in Electronics Electrical Engineering.

· Fresh graduate or 1 year or more working experience

· Preferable experience in Electronics Test and Measurement Instrument/Power Engineering/Battery

· Class 2/3 driver licence.

· Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Job Type: Full-time

Job Types: Full-time, Permanent

Salary: $3,500.00 - $5,500.00 per month

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

BROAD FUNCTION

A dedicated and proactive IT Support Engineer with a strong foundation in supporting environments primarily consisting of Windows devices and the Microsoft 365 suite.

Manage IT assets and responsible for troubleshooting/repair, providing technical support, and ensuring seamless end-user IT operations.

Effectively support the organization's IT needs, contribute to a positive user experience, and grow within the role.

ROLES AND RESPONSIBILITIES

• Provide Technical Support: Ensure timely and effective resolution of technical issues related to windows devices and Microsoft 365 applications, minimizing downtime and maintaining productivity.
• Enhance User Experience: Deliver high-quality customer service and support to end-users, ensuring their IT needs are met and they are satisfied with the solutions provided.
• Maintain IT Infrastructure: Assist in the maintenance and optimization of the IT infrastructure, including performing routine updates, backups, and system monitoring to ensure smooth operations.
• Support IT Projects: Contribute to various IT projects and initiatives, providing support and collaborating with the IT team to achieve project goals and improve IT services.
• Develop Technical Skills: Continuously learn and develop technical skills to stay updated with the latest technologies and best practices, enhancing the overall capability of the IT support team.
• Documentation and Reporting: Create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps, ensuring knowledge is shared and easily accessible within the team.
• User Training and Education: Conduct training sessions and create user guides to help end-users effectively utilize Windows devices and Microsoft 365 applications, promoting best practices and reducing common issues.
• On Rotating Roster: Provide standby support during off-office hours and weekend on a rotational basis.
• Ad-Hoc Assignments: carry out any other tasks assigned by the Supervisor or Reporting Officer.

EXPERIENCE

• Technical Support: Provided first-level support to users, resolving issues related to Windows devices and Microsoft 365 applications. Assisted in setting up new workstations and configuring user accounts.
• Incident Management: Logged and tracked support tickets using IT service management tools. Ensured timely resolution of incidents and escalated complex issues to senior engineers when necessary.
• System Maintenance: Performed routine maintenance tasks such as software updates, system backups, and virus scans. Monitored system performance and implemented necessary optimizations.
• User Training: Conducted training sessions for end-users on best practices for using Windows devices and Microsoft 365 applications. Created user guides and FAQs to assist with common issues.
• Collaboration: Worked closely with the IT team to support various projects and initiatives. Participated in team meetings and contributed to the continuous improvement of IT services.

SKILLS

• Technical Support: Proficient in diagnosing and resolving hardware and software issues on Windows devices. Experienced in providing remote and on-site support to end-users.
• Microsoft 365: Skilled in managing and troubleshooting Microsoft 365 applications, including Outlook, Teams, OneDrive, and SharePoint. Familiar with user account management and license allocation.
• Windows OS: Strong understanding of Windows operating systems (Windows 10/11), including installation, configuration, and maintenance. Knowledgeable in Active Directory for user and group management.
• Networking: Basic knowledge of networking concepts such as TCP/IP, DNS, DHCP, and VPN. Capable of troubleshooting connectivity issues.
• Customer Service: Excellent communication and interpersonal skills, with a focus on delivering high-quality support and ensuring user satisfaction.
• Documentation: Ability to create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps.

QUALIFICATIONS

• Diploma or Bachelor's Degree in IT with minimally 3-5 years of relevant experience.
• With relevant certifications such as CompTIA A+, Microsoft Certified: Modern Desktop Administrator Associate, Azure Fundamentals, CCNA, or equivalent will be an advantage.

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.