Responsibilities:

· Project management involving Sanitary, Plumbing & Gas Services

· Documentation of method statement and work procedures

· Review and monitor site construction activities programme to ensure work completion as scheduled

· Evaluation, Cost estimation & analysis for Sanitary, Plumbing & Gas Services

· Preparation of design construction drawings

· Liaison with all parties involved in the project including Local Authorities, Consultants, Architects, Main contractor, Sub-contractors & Suppliers

· Attend site meetings and inspections.

Requirements

· Degree / Diploma in Mechanical or related discipline

· Knowledge of tender costing with experience in evaluation and cost estimation for Sanitary, Plumbing & Gas Services will be an added advantage

· 3 years working experiences in similar position with relevant design and installation knowledge preferred but fresh graduate may apply

· Excellent interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Employment Type: Full-time

About the Role:

We are seeking a skilled and proactive IT Level 2 EUCD (End-User Computing Devices) Assistant Specialist to join our dynamic IT support team. In this role, you will be guided to provide second-level technical assistance to ensure seamless operation and optimal performance of end-user computing devices and systems. Your expertise will be crucial in resolving complex technical issues and delivering exceptional service to our users.

Key Responsibilities:

• Assist in Level 2 technical support for end-user devices, including desktops, laptops, tablets, mobile devices, and peripherals.
• Troubleshoot and resolve hardware, software, and connectivity issues in a timely manner.
• Collaborate with helpdesk to escalate unresolved issues and ensure prompt resolution.
• Install, configure, and maintain end-user devices and related software applications.
• Support system upgrades, patches, and new software rollouts for end-user devices.
• Manage and update IT documentation, including FAQs and troubleshooting guides.
• Monitor and address vulnerabilities and compliance issues on end-user devices with other infrastructure teams.
• Provide excellent customer service by effectively communicating technical solutions to non-technical users.

Required Qualifications:

• Minimum 1 years of experience in IT support, specifically with end-user computing devices.
• Good technical knowledge of Windows, macOS, and mobile operating systems (iOS/Android).
• Experience with Active Directory, Office 365 and remote troubleshooting tools.
• Familiarity with endpoint security solutions and system management tools (e.g., SCCM, Intune).
• Strong problem-solving skills and ability to work independently under minimal supervision.
• Excellent communication and interpersonal skills with a customer-focused mindset.

What We Offer:

• Competitive salary and benefits package.
• A supportive and inclusive work environment.
• Exposure to cutting-edge technologies and projects.

How to Apply:

Interested candidates are encouraged to submit their resume and cover letter outlining their qualifications and experience.

Join us in delivering exceptional IT support and driving technological excellence!

Job Responsibilities:

• Design and commissioning of building electrical systems including, fire alarm, EVCS, power distribution, lighting, lightning protection etc.
• Perform Lighting Power Budget calculations.
• Understand and design Single Line Diagram and perform electrical load calculations.
• Understand and familiarize with Singapore authority requirements and adherence to Singapore building code of practices.
• Involve with project site meetings to understand client requirements and site supervision.
• Participate in Testing & Commissioning phase of completed electrical installations.

Experienced Electrical Engineer with minimum 5 years of relevant experience is welcomed to apply.

Requirements:

• An electrical engineering degree recognised by the PEB of Singapore.
• Familiar with statutory code and requirements.
• Minimum 5 years of work experience as a Electrical design Consultant in an M&E consultancy firm.

A. Overall Purpose Of The Job

As a member of the Service Desk team, this position serves as a single point of contact for all IT issues and requests reported by users through the different support channels (phone, email, Self-Service Portal, Tech Concierge Desk). It is responsible for providing support (remotely or onsite) on company supported computer software, applications, and platforms.

B. Key Responsibilities

The scope of responsibilities includes the following:

• Serve as the first point of contact for users experiencing technical issues via different support channels (phone, email, Self-Service Portal, Tech Concierge Desk).
• Diagnose, troubleshoot, and resolve hardware, software, and network issues efficiently. ● Log incidents and requests accurately in the service management tool, categorizing and prioritizing them based on urgency and documenting with event timeline.
• Escalate unresolved issues to relevant next level support team (L2/L3)
• Ensure effective management of all incident priorities including Major Incidents, Priority 1,2,3 and 4 and service requests through various communication channels, including phone, email, and in-person interactions at the concierge desk .
• Act as an Incident Manager and drive end-to-end Major Incident and Priority 1 incident management process
• Monitor ticket, email, chat, phone queues and agent performance to ensure adherence to service level agreements (SLAs) and quality standards
• Handle user account lifecycle management (Joiner, Mover & Leaver), access provisioning in accordance with company IT security policies.
• Perform regular out of office hours on call duties as per operational needs
• Oversee DSAT feedbacks and take corrective action
• Handle account provisioning across various system platforms (Active Directory, GSuite email account, Windows, Linux etc) for staff and generic accounts such as service accounts, admin account or FTP.
• Oversee daily cessation activities and evaluate any potential issues to ensure compliance with audit requirements.
• Provide reports upon stakeholder requests to list the active users or users associated with a specific application.
• Manage and process IT service requests, assist in projects including user profiling setup, software installation, and system configuration

● Assist in DWS (Digital Workplace Services) BAU tasks and projects such as but not limited to the following:

• OS imaging, deployment, upgrade, and tracking (Windows and Mac)
• Endpoint device management
• Hardware refresh
• Maintain up-to-date knowledge base articles for common issues, troubleshooting steps, and SOPs used by the Service Desk team
• Collaborate with cross-functional teams (Product Managers, Engineering, Architects, etc.), and business stakeholders and ensure proper escalation to improve service delivery and user experience.
• Communicate effectively with end-users, keeping them informed of the status of incidents and requests.
• Monitor alerts triggered from servers, databases, or systems and inform the respective teams for necessary actions.

C. Job Profile

• Required Qualifications
• Degree/Diploma in Computer Science, Information Technology, or related field • Proven work experience in an IT support function such as a Service Desk Agent, Desktop Support Engineer, or other similar roles
• Working knowledge and experience on ITSM ticketing tools (ServiceNow, etc.) • Working knowledge and experience on computer hardware, OS, software, and applications both in Windows and Mac environments.
• Comfortable in supporting users over the phone, onsite, or remotely using remote access tools such as Teamviewer
• Possess an ITIL v3 and above Foundation certification is an advantage
• Knowledge of user access management processes and tools such as Sailpoint or OKTA is a plus.

Required Competencies

• Excellent written and verbal communication skills
• A minimum of 5 years of experience in a 24X7 service desk or technical support role
• Good interpersonal and problem-solving skills
• Able to multitask and prioritize the tasks accordingly
• Pragmatic and flexible mindset to succeed in an ever-changing and dynamic environment • Capacity to learn and adapt to new technologies fast
• Ability to proactively carry out tasks independently or with minimal supervision
• Clearly and calmly communicating with team members or stakeholders to manage expectations and coordinate efforts during high-stress situations.

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ HDB experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Job Description:

Facilities Operations and Management

• Lead the planning, be hands-on construction supervision and maintenance of facilities, equipment, and buildings
• Design and lifecycle management of all facilities and equipment
• Maintain documentation related to electrical systems, including schematics and maintenance records
• Develop and maintain workspace (clean room, lab & offices) that builds a work environment enabling collaboration, innovation, productivity, and destination of choice
• Ensure high level of service for transportation, pantry, and other services
• Lead all aspects of building space allocation and layout, communication services and facilities expansion
• Lead Singapore office access and security control in partnership with Asia Regional Security lead
• Ensure all facilities meet established environmental and safety control requirements in partnership with Asia EHS team
• Collaborate with the business continuity team on disaster preparedness policies and procedures
• Manage the portfolio KPIs, space utilization rate and budget spend
• Lead and implement Integrated Facility Management outsourced for Singapore

Space Planning and Projects

• Develop space roadmaps for cleanroom, lab, and offices to meet business needs
• Lead site planning and design for new building construction, remodels, cleanroom, and lab installs, capacity planning, space planning, and engineering
• Develop and manage budget/timeline for projects

Real Estate Management

• Drive proactive planning and management of the Singapore real estate portfolio and leases
• Manage the site selection, negotiate, and execute lease agreements

Vendor Management

• Lead oversight of the performance of service providers, contractors, vendors, and suppliers
• Partner with Indirect Procurement to select and manage vendors for construction and operations based on procurement guidelines and standards

Data Analytics

• Compile market data, forecast, budget, and other analysis to support real estate investment opportunities
• Create and benchmark industrial peers’ key operational and service levels KPIs

Qualifications

• Bachelor's Level Degree with at least 5 years of experience (preferably in Electrical)
• Possess Singapore Certified Energy Manager (SCEM)
• Strong understanding of energy auditing, energy modelling, and energy efficiency technologies
• Demonstrated ability to partner effectively with business groups and align with company’s goals and objectives
• Deep understanding of real estate and facilities ecosystem: strategic sourcing, supply chain management, people management, facilities management, lease transaction management, design, construction, and project management
• Experience in leading country level network of sites, including knowledge in Singapore and international commercial real estate markets and regulations from proposal to build.
• Held position(s) in relevant or manufacturing environments
• Experience in operation and maintenance of transformers, LV/MV switchboards, UPS, motors, frequency converters, and power distribution
• Ability to study protection circuits, single line drawings, and control circuits
• Knowledge of low voltage systems including fire protection
• Compulsory knowledge of HV, LV, transformers, switchboards, and breakers
• Manage projects related to electrical infrastructure upgrades and improvements
• Experience in project installation of electrical distribution systems
• Strong communication and presentation skills with senior leaders
• Proficient with organizing and using data and financial analyses support and influence decision-making
• Ability to travel up to 30% of the time

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a novel near-eye display technology for augmented reality (AR).

Key Responsibilities

• Participate in the research project with Principal Investigator (PI), Co-PI and the research team members to ensure all project deliverables are met.
• Conduct research towards a novel near-eye display for augmented reality and develop a prototype.
• Coordinate procurement and liaison with vendors/suppliers and carry out other project related activities.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements

• A Bachelor/Master’s degree in computer, mechanics or related programmes.
• Knowledge and experience in near-eye display for VR/AR will be advantageous.
• Able to build and maintain strong working relationships with people within and external to the university.
• Show strong initiative and take ownership of work.
• Teamwork spirit

Key Competencies

• >= 2 years of research experience in near-eye display technologies for VR/MR.
• Teamwork spirit and ownership attitude.

PFU Asia Pacific Pte Ltd ("PAPL") is assigned as the control center in managing scanner sales and marketing within Southest Asia region.

Join us as Technical Support Engineer to be an integral part of our regional sales team, helping to drive the growth of the Ricoh document scanners.

Responsibilities

1.Post-sales support :

- Provide technical support to partner or customer after purchasing our product.

- Assist technical team of partner and customer to tackle and resolve technical issue.

- Dissemble and assemble scanner according to maintenance manual(training will be provided).

- Train and enable service partner to provide post-sales support to end-user

- Manage and process of warranty claims, demo/standby unit loan, spare part cannibalization, with system and paperwork.

- Installation and configuration of hardware and software products.

2. Pre-sales Support :

- Support sales activity as technical expertise.

- Assist sales team, partner or customer to win and deliver deals.

- Demonstration of hardware and software product.

- Assist in integration of own products with 3rd party solution.

- Training and enable partner on pre-sales technical capabilities.

- slight experience in programming will be advantage.

- Occasional overseas travel is required.

(Average 1 trip per quarter. Mainly to ASEAN, South Asia countries, or Japan)

We appreciate all applicants for their interest in this opportunity. However, only those shortlisted for interview will be contacted.

Lead Mechanical Engineering

Mechanics- CRAFTMANSHIP - Project execution - COOPERATION

The Most Desired Audio Brand

At Bang & Olufsen, we strive to be the most desired audio brand in the world. For more than 95 years, we’ve developed products that change moods, inspire minds, and instill pride in all of us. We are passionate innovators, using our deep knowledge and collaboration skills to solve and simplify complex challenges every day, each of us driven by the profound effect sound can have on the mind. We welcome others that share our passion.

Join us to use your mechanical expertise to create the next iconic wearable Bang and Olufsen product. Here you get to participate in project teams where you in unison with expert colleagues and Partners, drive mechanical architecture and engineering.

Your mission

As our new mechanical engineer for wearable products, you will join our Project development department as part of the global Mechanical engineering team. Here you will drive NPI projects as Sr. Lead mechanical engineer and expert for earphone & headphone program.

Working alongside concept creators, hardware and acoustics specialists, you will create new and exciting products based on Concept and Business briefs. Joining various project teams, you will:

• Acting as lead for the mechanical design creation process, throughout complete NPI phase.
• Master concept and architecture engineering, providing mechanical engineering and knowhow.
• Make assessments and recommendations e.g., on material and process choices based on mechanical design principles, supporting design for perfection, longevity and magical elements.
• Create mechanical constructions and make proof of concept by rapid prototyping & simulations.
• Cooperate with suppliers for exploration and product development, transforming proven concept and architecture into product requirements.
• Work closely with Quality organization and Partners to ensure product and process validation.

Your network

You will become a part of the global mechanical team. We are a very dynamic team that approach our tasks with vigor and technical curiosity as we are all proud engineers loving our products and exist to create amazing products.

We are an experienced team, and you bring a lot of experience and join a very inspiring environment. Here you will have room to grow and the opportunity to bring your ideas and passion for mechanical design and development into play.

Your location

You will be working out from our office in Singapore. Working closely with your colleagues in a global setting and suppliers in Europe, China and other parts of Asia, you should also expect there to be some travel activity.

Education & Experiences

A passion for mechanical engineering & creation. You have a well-founded and deep understanding of mechanical architecture, design, manufacturing processes and material characteristics. Experiences of leading suppliers and have the capability to transform proven architecture into product requirements.

Moreover, you bring:

• Degree or master’s in mechanical design, Engineering
• 10+ years of experiences in R&D or product development
• Design experiences in audio, wearable products, hearing aids devices an advantage
• 3D CAD design SW such as Creo Parametric
• Capable of Architecture design with good understand of GD&T, simulation
• An understanding of the different tooling processes for different material such as plastic, silicon, aluminium, steel, glass and wood
• An open mind, technical curiosity, and attention to detail
• Good communication skills in English. Fluent in Mandarin a plus.

Ready to join the most desired audio brand in the world?

Then send your CV and application by pressing the apply bottom above. Applications are assessed continuously, so please apply as soon as possible and no later than 31st January 2025.

Read more about our recruitment process and explore your career opportunities within Bang & Olufsen, https://www.bang-olufsen.com/en/corporate/careers

Main Responsibilities

1. Plan and execute layout designs for modules or single-chip circuits, including routing and verification tasks such as DRC, LVS, and EM checks.
2. Enhance product performance through optimized layout design techniques.
3. Collaborate effectively with design engineers to achieve layout design objectives.
4. Prepare and review tape-out data for accuracy and completeness.
5. Draft layout design documentation.

Requirements

1. Bachelor’s degree or higher in Electronics, Microelectronics, or related fields.
2. Direct experience in analog and mixed-signal IC layout design; familiarity with EDA tools such as Virtuoso, Calibre, and EM verification tools.
3. Proficiency in CMOS/BCD MOS processes and device structures, as well as layout handling for common package types.
4. Familiarity with common ESD protection device structures, principles, and full-chip latch-up protection methods.

5. Strong written and verbal communication skills in both English and Chinese.

6. Proactive, diligent, and capable of working under pressure; excellent learning, communication, and teamwork skills.

This role welcomes both fresh graduates and experienced engineers.

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

Job Description:
We are seeking a skilled and motivated System Performance Engineer to join our team. In this role, you will develop and optimize operator libraries for large model inference, training, and fine-tuning processes. You will map operator library implementations to hardware, conduct performance analysis, and identify bottlenecks to maximize system efficiency and performance.

Key Responsibilities:

• Operator Library Development: Develop and optimize libraries for large model inference, training, and fine-tuning, ensuring efficient operation on hardware platforms.
• Performance Analysis: Analyze operator library implementations to identify and resolve performance bottlenecks, optimizing for memory usage, processing time, and data accuracy.
• Optimization Implementation: Engage in the software design and optimization of operator libraries, including instruction-level parallelism, to maximize hardware performance.
• Mapping to Hardware: Map operator library implementation to the underlying hardware, ensuring seamless execution and improved performance.
• Testing and Validation: Perform detailed testing, including memory usage and processing time analysis, to validate optimized library performance.

Qualifications:

• Educational Background: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Strong understanding of large model algorithms and the principles behind their design.
  • Proficiency in computer architecture and many-core processor principles.
  • Practical experience in CPU performance optimization.
• Programming Skills: Expertise in C/C++ programming for performance optimization.
• Communication Skills: Excellent interpersonal and communication abilities to collaborate effectively within cross-functional teams.

Why Join Us?

• Work on cutting-edge technologies and contribute to the development of high-performance systems.
• Collaborate with a dynamic team of experts in semiconductor and hardware design.
• Make an impact on the performance of next-generation hardware systems.

Job Description:

We are seeking a SoC Verification Engineer to test and validate System-on-Chip (SoC) designs. You will work with cross-functional teams to ensure chip functionality through verification using UVM, SystemVerilog, Python, and other cutting-edge tools.

Responsibilities:

• Develop verification plans for module and system-level testing.
• Collaborate with design engineers to address design defects and optimize chips.
• Set up virtual testing environments and develop test cases (direct and randomized).
• Analyze code coverage and functional coverage to ensure thorough testing.

Qualifications:

• Bachelor's degree in Electronics, Computer Science, or related field.
• 3+ years of experience in SoC verification.
• Strong knowledge of UVM, SystemVerilog, Python (TCL/Perl a plus).

Experience in IC Design Process and SoC/IP verification.

Job Summary:
We are looking for a highly skilled AI Chip Processor Core Verification Engineer to design, verify, and enhance AI processor cores. This specialized role demands deep expertise in hardware verification to ensure the functionality, efficiency, and performance of AI chips through systematic test planning and execution.

Key Responsibilities:

• Testplan Development & Verification:
  Develop comprehensive test plans, create and manage testbenches, and ensure thorough testing by analyzing code/functional coverage. Prepare detailed verification reports.
• Gate-Level Simulation:
  Conduct gate-level simulations to validate chip designs, generating and presenting simulation reports.
• Efficiency Improvement:
  Write and refine scripts (in Shell/Python) to automate tasks and enhance the verification workflow, improving overall efficiency.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Computer Science, or a related field.
• Technical Expertise:
  • Proficiency in UVM (Universal Verification Methodology) for testbench development.
  • Hands-on experience with Shell and Python scripting for verification tasks.
• Soft Skills:
  • Strong interpersonal and communication skills to work collaboratively with cross-functional teams.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

Job Description:

We are looking for an Analog Chip Design Engineer to lead the development of digital standard cell libraries and design advanced analog circuits. You will optimize circuit designs, innovate new digital standard cells, and collaborate with cross-functional teams to meet performance, power, and area requirements.

Key Responsibilities:

• Circuit Design & Optimization: Lead analog circuit design, optimize for speed, power, and reliability using Cadence Virtuoso, Spectre, and HSPICE.
• Digital Standard Cell Libraries: Develop high-performance, low-power digital standard cells.
• Innovative Architecture Development: Research and design innovative digital standard cell architectures and explore new logic families and power-saving techniques.
• Collaboration: Work with layout designers to ensure manufacturability, performance, and adherence to DFM/DFT standards.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. is a plus.
• Experience: 5+ years in high-performance analog design with expertise in deep sub-micron process technologies (12nm and below).
• Skills:
  • Analog Design Expertise: Proficient in transistor-level design, noise analysis, and power optimization.
  • Tool Proficiency: Experience with Cadence Virtuoso, Spectre, and HSPICE.
  • Digital Standard Cell Design: Experience designing digital cells balancing performance, power, and area.
• Communication: Strong collaboration skills and ability to work in cross-functional teams.

Job role:

1. Works with the front-end design team to complete the chip floorplan , clock

architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDS2, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability (DFR) and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an

automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 3 years of work experience in the digital backend design field.

3. Hands-on project experience is required.

4. Tapeout experience at advanced technology is prefered.

5. TCL , Perl or Python script development and familiar with EDA tool design will be plus.

Responsibilities

• To ensure smooth operation of site activities.
• To Provide logistical support (site utilisation) when needed, as requested by sub-contractors.
• To be the liaison for the coordination of different trades within the same discipline.
• Responsible for all on-site engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients queries to ensure timely work arrangements.
• Involve in day-to-day management of site supervision of construction activity to ensure site works are carried out as per schedule

Qualifications

• Degree/Diploma in Design/Structural/Architectural/Civil Engineering/Building Construction or any equivalent qualification.
• Experience/Knowledge in structural steel works/ precast RC works/ Building/ MRT/ LTA is an advantage
• More than 8-years of site experience in Construction sector.
• Good team player and able to work independently
• BCSS Certificate
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Mission:

- Develop Go to Market Strategies on the IDEC’s focused products for specific vertical markets in the APAC Region

- Meet the growth target of product group in the APAC

- Develop sales across APAC & Middle East as per assigned targets

- Assist distribution channel during customer visits to conduct design-in opportunity

- Regular visits to direct account/customers to maximize IDEC opportunities

- Generate NBO (New Business Opportunities)

- Maintain a strong level of relationship with Distributors & Direct Accounts

- Following the group's pricing and sales policies

- Provide timely and accurate weekly and monthly Sales report to the sales management

- Maintain and share competitive intelligence

- provide customers feedback, market trend and new product development ideas to the sales/product management

Main Tasks:

- Tracking product performance against target

- Provide go to market strategy and for successful penetration into the focused vertical markets, identifying suitable portfolio for specific vertical markets

- Sales management and mentoring of distributors in assigned territories to generate NBOs and achieve budget

- Periodic visits to the distributors to conduct business reviews and regular joint customer visits

- Raise and follow up special price enquiries, prepare quotations with objective to maximize margin

- Assist distributors during exhibitions both at Marcom level and physical presence during the event

- Finding new prospective distributors and customers when needed

- Analyzing feedback from various channels and proposal of actions to Management

- Collect and feedback any competition information

- Prepare and Manage Sales Forecast quarterly/yearly in conjunction with Company Business Plan

- Work with colleagues and managers to understand & promote Company strategy & objectives

- Presentation of periodic reports with activity analysis

- Any other reasonably duties define by direct manager

Key Performance Indicators:

- Achievement of company turnover objective

- Achievement of personal turnover objective

- Achievement of Product and Vertical market growth target

- Achievement of NBO generation & win (number to be defined)

Territory Focus: APAC and Middle East. Region to be defined (e.g. Singapore, Malaysia, Indonesia, Vietnam, Philippines, S. Korea, Australia)

Candidate Profile:

- Bachelor’s Degree in electrical engineering is preferred (not mandatory)

- Minimum of 4 years of experience in OEM or distribution sales, product management

- Experience working with multiple distribution channels

- Ability to translate customer requirements into workable solutions

- Strong oral and written communications skills

- Strong technical aptitude & the ability to understand & communicate technical information

- Strong organizational skills & the ability to coordinate multiple projects simultaneously

- Able to travel overseas as required

- Good attention to detail and strong follow-up skills

- Ability to analyse sales results, interpret data and prepare action plan accordingly

- Knowledge of Microsoft Word, Excel and PowerPoint

- Experience with Salesforce.com is a plus (not mandatory)

- Posess a driving licence and car is desired (not mandatory)

Attractive package based on fixed salary + Variable bonus based on KPI’s achievement + Local travel allowance + Telephone allowance.

Job Position:- Senior Resident Engineer (C&S)

Time:- Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• More than 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.