☑ Basic $3000 - $4800

☑ Permanent role + High Variable Bonus.

☑ 5.5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm ; Sat: 8am - 12pm)

☑ East Area – Tampines

☑ Semicon Construction

Job Responsibilities

• Safety Management: Implement and maintain a Site Safety Management System to minimize risks and prevent accidents.
• Safety Programs: Execute workplace safety, health, and environmental initiatives, ensuring compliance with regulations.
• Training & Enforcement: Conduct safety training and inspections to ensure adherence to safety standards on-site and at HQ.
• Compliance: Ensure strict adherence to statutory safety and health requirements, and manage safety reports and audits.
• Team Leadership: Work with WSH coordinators and supervisors to uphold safety practices at the project site.
• Continuous Improvement: Stay updated on industry best practices and regulatory changes, and assist in safety certifications.

Job Requirements:

• Diploma in Environment, Health and Safety Management or related field.
• 1-3 years’ experience in construction safety.
• Possess positive and willing to learn attitude.
• Able to multi-task and able to work in a fast-paced environment.

☑ Salary: $3700 - $4600 + AWS

☑ Working hours: Mon - Sat, 7am - 7pm

☑ Location: Onsite - East/ West (project-based)

☑ Well-established company in Marine Civil Engineering industry

☑ Fresh graduates are welcome to apply!

Job description:

• Develop and manage construction schedules, coordinate activities, and monitor project progress.
• Conduct site inspections, ensure safety compliance, and manage daily site operations.
• Prepare and submit project reports, analyze specifications, and maintain project documentation.
• Coordinate with clients, consultants, and other stakeholders.

Job requirement:

• Bachelor's degree in Civil Engineering only.
• 2 - 4 years of work experience in infrastructural or marine construction industry. Open to fresh graduate to apply.
• Relevant project experience in dredging, reclamation, or nearshore construction is highly advantageous.
• Daily sea travel to island work site is mandatory.

Only shortlisted candidate will be notified.

Yang Hui Shan (Sherri)

EA Reg No.: R22106683

Junior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 4 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

· Hands-on experience in the design and integration of RF, Analog, and Mix signal blocks such as PA, LNA, mixer, frequency synthesizer, filter, coupler, detector, microcontroller, etc., supplemented with knowledge of specification derivation from system level requirements

· Experience working with basic CAD tools and competence in evaluation flow and operation of appropriate test equipment to evaluate product performance

· Experience in script writing such as Bash, python etc., will be a plus as it is used in test automation

Job Responsibilities

• To assist in reply to sales enquiries and tender queries
• To attend the tender interview
• To prepare specifications for tendering and order processing
• To assist in clarifying matters raised by principals
• To prepare local cost estimation and project estimation

Job Requirements

• Degree or Diploma in any discipline.
• Good Communication skills.
• Only Singaporean and PR need to apply.

About Marvell

Marvell’s semiconductor solutions are the essential building blocks of the data infrastructure that connects our world. Across enterprise, cloud and AI, automotive, and carrier architectures, our innovative technology is enabling new possibilities.

At Marvell, you can affect the arc of individual lives, lift the trajectory of entire industries, and fuel the transformative potential of tomorrow. For those looking to make their mark on purposeful and enduring innovation, above and beyond fleeting trends, Marvell is a place to thrive, learn, and lead.

Your Team, Your Impact

Your team focuses on Storage controllers and cloud data center connectivity solution enabled our customer to move data inside and between cloud data center faster and more reliably. The PAM4 DSP technology enabled 200G, 400G and 800G data transfer rate within the data centers. The Coherent DSP technology enabled 100G and 400G data transfer rate between data centers. Marvell is the enabler and partner of world’s leading cloud hyper scalers in area of transferring data from Copper PHY to the world of Optics.

What You Can Expect

• Responsible new product introduction initial phase of silicon bring up working with NPI Product and Test team in the US to validate new device features and test/DFT methodologies.
• Collaborate with NPI PE, Test, Foundry and Reliability Engineering teams to drive NPI development of highspeed datacenter products and their variants.
• Analyze yield at engineering sample phase and characterize NPI product performances and manufacturing yield window including bench correlation to meet product cost targets.
• Perform data mining and statistical data analysis on wafer sort and final test parametric to support initial product assessment.
• Perform functional testing and analysis to ensure product operation and reliability.
• Support test engineering on resolving test program related issues.
• Support volume engineering sample supply for early hyperscaler customer engagement.
• Plan and coordinate (data analysis, debug, root-cause, implementing solutions) yield & test time improvement activities to meet the set mass production release goals.
• Engage & manage Test Subcon in early production stage
• Collaborate with HVM PE to identify and drive production capacity improvement after production release via test time reduction, yield improvements, qualifying alternate sources etc.

What We're Looking For

• B.S. in Electronics/Electrical Engineering or related field. M.S. preferred
• Minimum 8 years of experience in the semiconductor industry
• Minimum 5 years of semiconductor manufacturing in 7nm technology node and below
• Demonstrable knowledge of yield analysis, quality management tools, GR&R, Cp, Cpk.
• Minimum 5 years and demonstrable knowledges of Auto Test Equipment (ATE), Adventest 93K, UltraFlex, test handler, wafer prober is a plus.
• Demonstrated proficiency with strong hands-on test development and debug skills
• Self-directed, capable of managing complex projects, working individually and collaborating with other technologists to achieve objectives
• Excellent communication skills, including written and spoken English

To apply, please submit your application via this link: Marvell Careers

Senior Radio Frequency Design Engineer

About Doodle Labs

Doodle Labs is the global leader in high-performance private wireless systems. We build cutting-edge mesh networks for robotics, drones, and the Industrial Internet of Things. Doodle Labs has experienced rapid growth over the past five years as our radio systems have been adopted by Fortune 500 companies (e.g. Airbus, General Electric) and industry-leading innovators (e.g. Boston Dynamics, FLIR).

Your Opportunity

Doodle Labs develops market-leading broadband mesh radios. Products include handheld mesh hotspots (Wearable Smart Radio) and tiny embedded multi-band radios for robots (Helix). Your opportunity is to build novel RF products while implementing Doodle Labs’ patented RF techniques. You will design and develop next generation wireless communication systems utilizing Wi-Fi 4/5/6/6E chipsets and protocols. As a senior member of the engineering team, you’ll have the opportunity to lead projects with the support of a cross-functional team of RF engineers, technicians, software engineers, etc.

Job Description

· Perform detailed radio frequency translation plans and architectures

· Evaluate gain, noise parameters (NF, SNR), dynamic range, linearity, and power consumption analyses to execute a predictable, robust design

· Collaborate with CAD engineers and drive PCB implementation of the design with emphasis on clean power supply design, interconnect design for required EMI and RF transmission performance

· Participate in design reviews and prepare design documentations at every stage of development until the final prototype test and characterization

· Perform parametric evaluation of transceivers, like Pout, IMD/IP3, EVM, noise parameters with spectrum analyser, modulation analyser and perform wireless link level functional evaluation to complete the product characterization

· Collaborate with product engineers for various certification procedures and NPI, followed by the Transfer of Technology (ToT) for large quantity production

Job Requirements

· Bachelor’s, Master’s, or PhD in Electronics Communication Engineering or Digital Communication Engineering

· Minimum 8 year of experience as a RF system hardware with proven track record of meeting industry delivery standards in the relevant areas

· Good interpersonal and creative skills with the ability to multitask in a demanding and fast paced environment

• Plan, lead and supervise upgrading works, addition and alteration works
• Lead a team of supervisors and workers and oversight of manpower for project execution
• Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices
• To attend site matters / discussions to resolve technical / site issues and progress matters
• Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management
• Monitor and control project schedule, materials delivery and budget etc
• Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Establish and maintain a detailed tracking and filing system of all documents
• To prepare, submit Variation Claims with instruction documents & part-plan from client
• Maintain all filing systematically & uploading of softcopies in the system
• To place materials order to Purchaser in advance as per Order list as per site requirement
• Responsible for ensuring implementing safety measures
• Able to commit 6 days work

Requirements

• Must have Refrigeration knowledge or experience.
• Min 2 - 5 years working experience in the field of Industrial cooling, industrial refrigeration, electrical, mechanical as well as electronic skill.
• Candidate must possess at least a ITE Certificate / Diploma in Electrical / Electronic or other equivalent qualification.

Job Description

• Mainly in house chiller repair.
• Service and maintenance on site, installation and commissioning if willing to learn, training will be provided.
• Respond and attend calls from clients.
• Responsibility of all other service tasks as assign.
• Perform ad hoc duties as assigned by Manager / Supervisor.
• Able to work independently.
• Willing to learn, training will be provided by way of training in our HQ Germany or Subsidiary Office in China or on-the-job training.
• travel allowance given if willing to travel overseas for service jobs.

• Plan, lead and supervise upgrading works, addition and alteration works
• Lead a team of supervisors and workers and oversight of manpower for project execution
• Ensure designs / drawings meet relevant code and compliance requirements, and good engineering practices
• To attend site matters / discussions to resolve technical / site issues and progress matters
• Continuing to improve all installation works schedule and quality of work through proper planning of work method, materials procurement and selection, and efficient site management
• Monitor and control project schedule, materials delivery and budget etc
• Liaise coordinate with clients, consultant, project supervisors and sub-contractors on project related issues and to ensure project objectives are met
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Establish and maintain a detailed tracking and filing system of all documents
• To prepare, submit Variation Claims with instruction documents & part-plan from client
• Maintain all filing systematically & uploading of softcopies in the system
• To place materials order to Purchaser in advance as per Order list as per site requirement
• Responsible for ensuring implementing safety measures
• Able to commit 6 days work

I- Basic Function/General Scope of Work

The position takes overall responsibility of project management for all aspects (contract, commercial and technical) of the projects assigned. The position works closely with Project Manager so as to complete and achieve the projects’ objectives/ metrics as planned.

II- Key Duties & Responsibilities

1. Conducts site inspection, collects the data and transfers the information to design team to prepare drawings.

2. Verifies all drawings from design team prior to moving to construction phase.

3. Deals with customer requires related to drawings and requirements.

4. Coordinates with design team, customers and sub contractors during construction.

5. Checks and inspects the quality of work carried out by workers of subcontractors.

6. Assists and follows the assignments of project manager in ensuring that the projects are implemented on time, safety and in accordance with the customer requirements

7. Be responsible for testing and commissioning all equipment with subcontractors after installation.

8. Be responsible for customer training after project completed.

9. Be responsible for final inspection and collection the data for as built drawings.

10. The position is accountable for implementing assigned responsibilities and activities to attain project goals and objectives.

11. The position is accountable for strictly complying with Chubb’s Code of Ethics.

12. The position is accountable for implementing assigned responsibilities and activities to attain EH&S goals and objectives and complying with EH&S policies, applicable rules, procedures, and regulations.

III- Qualifications & Compentencies

The incumbent should possess:-

1- a degree in Engineering is required/preferred.

2- a minimum 3 years of Project Management knowledge, skills, experience.

3- Knowledge and experience in any kind of engineering management, problem solving, strong systematic and analytical thinking skills, strong knowledge of commercial terms and conditions, working within an ISO 9000 quality environment, strong coaching, influential and negotiation skills.

4- Good English communications and computer competencies.

5- Adaptability, Analytical Thinking, Teamwork, Communications, Listening and Ethics.

6- Experience in LTA projects is preferred.

Responsibilities

As a System/ Network Engineer, you will be responsible for the following:

System And Network,

Able to configure CISCO, Fortinet, Juniper, Firewall & Antivirus, and other security software.

Experience with CISCO core switches, Access Points (Wireless) such as Aironet / Meraki / HP Aruba is a plus.

Familiarize with CISCO Network LAN & WAN design.

Pre-sales to Point to Point and Client VPN.

Setup and perform troubleshooting with network technical skills, including CISCO Routers, CISCO Switches, wireless devices, Fortinet Firewalls, Load Balancers, and system management tools like Network Analysis.

Install WINDOWS Server O/S, WIN 11, Microsoft 365, Microsoft Platform for Servers, and PCs with hands-on experience in setup and configuration.

Knowledge of setup/configure VMWare, Exchange Server, SQL, and Virtual Server, along with hardware configuration experience (Server, external backup, UPS) in FAS System, HPE Storage, Synology NAL, etc.

Job Description

Rack/stack IT Equipment.

Installation/configuration of various OS (Windows, Linux, Vmware).

Work closely with Team Leader to meet system delivery milestones.

Engage with back-line support and/or with vendor’s support to diagnose and rectify technical problems.

Assist in day-to-day operation of the System Delivery team.

Carry out other technical related duties that may be required.

Design and implement LAN, WAN, VPN, and wireless networks.

Configure and Network security appliances such as firewalls, routers, and switches.

Requirements

Diploma/Degree in Information Technology, Computer Science, Engineering or equivalent

Able to configure/design and provide consultation for Cisco Switches, Router and Fortigate Firewall

3 – 10 years of relevant experience in server implementation / operation / administration for Vmware / Storage / Redhat / Windows.

Good analytical and problem-solving skills

Possess initiative with positive working attitudes

Strong teamwork, communication and interpersonal skills

Ability to work after office hours/weekend for systems preventive maintenance

Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Stay updated with the latest industry trends and technologies to continuously improve control
  system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• Minimum 3 years of experience in designing and implementing control systems for electrical machines.
• Proficiency in programming PLCs, HMIs, and motor drives.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251 WGT Group

Registration No | R22111484 Ketty Lim

The Electrical Engineer will be responsible for the detailed design, programming, and maintenance of electrical systems and controls. Key responsibilities include designing and sizing electrical components, programming PLC/HMI systems, and preparing technical documentation.

Responsibilities:

• Carry out detailed electrical design, including sizing and drawing preparation.
• Develop technical documents, including P&ID (Piping & Instrumentation Diagrams), I/O wiring diagrams, and technical data sheets.
• Program and configure PLC/HMI systems to meet project specifications.
• Perform electrical calculations and select components for ATEX environments, ensuring compliance with industry standards.
• Prepare pre-procurement documents and conduct technical evaluations of quotations.
• Provide engineering support for international projects, including troubleshooting and technical assistance.
• Assist in developing project schedules, creating work procedures and method statements, and preparing monthly progress reports.
• Understand hazardous area classifications and select appropriate instruments for hazardous zones (e.g., EX-d, EX-i certifications).

Requirements:

• Minimum Diploma in Electrical Engineering or Mechatronics.
• At least 5 years of hands-on experience in electrical design and programming.
• Proficiency in PLC/HMI programming, electrical calculations, and knowledge of ATEX standards.

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251 WGT Group

Registration No | R22111484 Ketty Lim

Join our dynamic team as an Inside Sales Engineer, contributing to our sales department by accurately interpreting customer inquiries and crafting comprehensive quotations that align with their technical needs while meeting company margins. As a Purchaser, you'll be responsible for procuring direct materials efficiently.

Responsibilities:

• Evaluate customer requirements and prepare high-quality proposals while adhering to commercial policies.
• Negotiate contract terms for mutual benefit and exceptional customer service.
• Liaise effectively with customers, ensuring top-notch after-sales support and relationship building.
• Collaborate with internal teams to provide accurate technical and commercial responses to clients.
• Maintain a meticulous log of customer sales inquiries and handle complaint reporting.
• Generate accurate purchase orders and oversee timely deliveries from suppliers.
• Manage emergency spares stock levels and handle material discrepancy complaints.
• Serve as a technical specialist for a range of igus® products, ensuring customer satisfaction and continual improvement in purchasing.
• Collaborate closely with the external sales team to surpass customer expectations.

Requirements:

The ideal candidate should possess:

• Tertiary education in Engineering or equivalent industry experience.
• Strong customer focus with excellent communication skills.
• Technical prowess to interpret and convey technical data effectively.
• Proactive, self-motivated, and organized with excellent teamwork skills.
• Ability to multitask, prioritize, and work toward common goals in a sales environment.
• Meticulous quoting and pricing abilities, problem-solving skills, and analytical thinking leading to creative solutions.
• Familiarity with the company's product range and basic computer applications.

If you're passionate about technical sales, possess exceptional communication and technical skills, and thrive in a collaborative environment, we'd love to hear from you! Apply now to be a part of our dedicated team.

JOB DESCRIPTION:

•

Review drawings and scope of works, resolve technical issues with clients and subcontractors.

•

Monitor overall site progress, schedule critical work paths to avoid delay in project schedule.

•

Ensure specifications are being followed and work is proceeding on schedule.

•

Plan work activities and ensure they are carried out in safe working environment.

•

Manage and supervise site workforce.

•

Prepare and submit weekly/ monthly progress/construction report.

Job Requirements:

•

Minimum 1-year relevant experience in building construction environment.

•

Basic knowledge in construction planning.

•

Proficient in MS Office and schedule reporting.

•

Ability to work independently and within a team.

Job Responsibilities:

• Develops new & existing software systems by designing, developing and installing software solutions to support business requirements.
• Prepares and install software solutions by determining and designing system specifications, standards, and programming.
• Support and maintain all software libraries and databases through proper documentations.
• Conduct network / software load and performance tests.
• Follows the software development lifecycle.
• Developing quality assurance procedures
• Provides information by collecting, analyzing and summarizing development and service issues.

Job Qualifications:

• Bachelor's Degree in Computer Science or Engineering or related technical discipline
• Experience with OAuth, JWT
• Experience with building APIs and services using REST, GraphQL, SOAP, Healthcare Protocols etc.
• Experience with Node.js.
• Experience with modern front-end stack like React, CSS, HTML , etc.
• Experience with server hosting engines such as Nginx, Apache.
• Experience in database management (MSSQL, Oracle)
• Ability to work with multiple operating systems (Unix - RHEL, Windows Server, Windows Clustering)
• Experience in development of distributed/scalable systems and high-volume transaction applications
• Excellent analytical and problem-solving skills.

Job Description & Responsibilities:

• Document Management: Manage the distribution of documents and drawings to clients and subcontractors, ensuring that updated versions are issued and maintained.
• Preparation of Technical Documents: Prepare method statements and work procedures, ensuring that they align with project specifications and regulatory requirements.
• Progress Meetings: Conduct weekly and monthly meetings with subcontractors to update and monitor the progress of work, addressing any issues that arise.
• Quality and Safety Compliance: Ensure that all work meets the required quality standards and complies with all relevant government and safety regulations.
• Drawing and Documentation Control: Oversee the management and control of drawings and technical documentation, ensuring accuracy and proper filing.
• Resource Management: Manage the procurement of resources, monitor and control material usage on-site to prevent wastage, and ensure that materials are used correctly.
• Coordination and Liaison: Assist Senior Project Engineer in coordinating with consultants on change orders. Work closely with the Quantity Surveyor to provide necessary supporting documents for these changes.
• Site Management: Organize labor, equipment, and materials for daily site activities, ensuring smooth operations.
• Material Inspection: Perform material receiving inspections and maintain accurate records of materials.
• Reporting: Prepare daily and monthly progress reports, maintain inspection records, and ensure they are up-to-date and accurate.

Requirements:

• Educational Qualifications: Bachelor of Engineering (Civil) or a Degree in Construction Management from a recognized institution.
• Technical Skills: Proficiency in AutoCAD and Microsoft Office applications.
• Experience: Candidates with knowledge of structural and architectural trades are preferred.

Responsibilities:

• Prepare and execute all assigned validation and re-validation protocols, as well as engineering study protocols.
• Monitor and manage the validation and re-validation status of machines and systems.
• Monitor machine performance to ensure high quality and yield results.
• Improve process performance to maintain product quality and quantity.
• Ensure calibration compliance at all times to adhere to Quality System Regulation (QSR).
• Document and prepare monthly, bi-yearly, and annual calibration of requirements and tools.
• Support engineering team members and other departments with projects, yield improvement, validation activities, troubleshooting and engineering studies.
• Annually qualify and re-certify the sterilizers used in production.

Requirements:

• A degree in any engineering field.
• Minimum of 2 years of experience as a Process Engineer in the medical device manufacturing industry.
• Proficiency in mechanical and/or electrical engineering.
• Strong verbal and written communication skills.

Your Team, Your Impact

Marvell is empowering the global data economy. Whether at the network core or edge, our leadership technologies make it possible for the world’s data to be processed, moved, stored and secured faster and more reliably. With leading intellectual property and deep system-level knowledge, Marvell's infrastructure semiconductor solutions are transforming the 5G, cloud computing, enterprise and automotive markets of tomorrow.

What You Can Expect

• Support new product introduction initial phase to validate new device features and test/DFT methodologies.
• Perform new device characterization, circuit sensitivity analysis, interpret findings & support root-cause investigations.
• Perform data mining and statistical data analysis on wafer sort and final test parametric to support initial product assessment.
• Support product assessment report generation.
• Perform functional testing and analysis to ensure product operation and reliability.
• Support & resolve Test engineering & program related issues.
• Support volume Engineering sample supply for early customer engagement.
• Plan and coordinate (data analysis, debug, root-cause, implementing solutions) yield & test time improvement activities to meet the set mass production release goals.
• Provide customer return verification support including implement containment & preventive actions
• Execute and implement test productivity activities which include test time reduction, retest reduction, test insertion removal, higher parallelism
• Transfer product knowledge to sustaining engineer
• Engage & manage Test Subcon in early production stage

What We're Looking For

• Bachelor’s degree in Computer Science, Electrical Engineering or related fields and 5-10 years of related professional experience.
• Master’s degree and/or PhD in Computer Science, Electrical Engineering or related fields with 3-5 years of experience.

Job Description & Responsibilities:

Reporting directly to the Managing Director, the Senior Project Engineer is responsible for the following:

• Lead and manage project supervisors to ensure the successful completion of projects.
• Ensure adherence to project budgets, schedules, and scope of work, while deploying appropriate staff resources.
• Review and assess project drawings, plans, specifications, and other relevant documents.
• Identify and troubleshoot issues arising during project execution and implement timely resolutions.
• Conduct and actively participate in weekly site meetings to monitor project progress.
• Collaborate with the Safety Officer to ensure compliance with quality standards and health & safety regulations.
• Monitor site staff to ensure strict adherence to all safety regulations.
• Prepare and submit project reports in a timely manner.
• Develop project drawings, including as-built drawings and shop drawings, as required.
• Perform any other tasks as assigned by the Managing Director.

Requirements:

• A minimum of a Diploma or Degree in Civil Engineering.
• Proficiency in Microsoft Excel.
• Ability to work 6 days a week with flexibility to work long hours when necessary.
• Possession of a personal vehicle is advantageous.
• 3-5 years of relevant working experience in construction or civil engineering projects, preferably in landed housing or fit-out jobs for shops.
• Certification in BCSS (Building Construction Supervisor Safety) or higher safety certification.
• Proficiency in CAD drawing.

Role:

• Diagnose and troubleshoot problems with marine engines, auxiliary engines, steering systems, and other related components.
• Carry out repairs on inboard and outboard engines, including work on fuel, cooling, and exhaust systems.
• Perform routine maintenance to ensure all shipboard systems are functioning properly.
• Maintain cleanliness of the ship and engine room while onboard.
• Provide detailed reports on work performed and communicate the nature of repairs and services to customers.

Safety and Compliance:

• Follow all safety protocols and regulations to maintain a safe working environment.
• Ensure compliance with environmental regulations related to marine services and repairs.

Documentation and Reporting:

• Keep accurate records of all services performed, including time spent, parts used, and labor involved.
• Use service management software to log and track repairs and maintenance tasks.

Team Collaboration:

• Collaborate with other technicians and service team members to ensure efficient workflow and high levels of customer satisfaction.
• Assist in training and mentoring junior technicians as required.
• Perform any other duties as assigned.

Requirements:

• Diploma or equivalent; technical certification or associate degree in marine mechanics or a related field is preferred.
• Minimum of 2 years’ experience in marine service and repair.
• Strong mechanical skills and ability to solve problems.
• Proficient in using diagnostic tools and marine service equipment.
• Knowledge of marine engines, auxiliary engines, and cargo pumps.
• Ability to read and understand technical manuals and schematics.
• Capable of lifting heavy objects, working in various weather conditions, and performing physically demanding tasks.

We are seeking a skilled and motivated Workplace Services Engineer to join our team. In this role, you will be responsible for maintaining, supporting, and improving the workplace technology and facilities that enable employees to work efficiently in a modern, flexible, and collaborative environment. You will work closely with cross-functional teams to ensure that workplace services and systems are operational, secure, and aligned with business needs.

· Technology Infrastructure Support: Manage and maintain the IT infrastructure for offices, including hardware (printers, monitors, workstations), software, video conferencing tools, and AV systems.

· Service Desk Support: Serve as a point of contact for employee support issues related to IT and workplace services, providing troubleshooting and guidance as needed.

· Collaboration Tools: Support and enhance collaborative tools such as video conferencing systems, messaging platforms (e.g., Teams), and other workplace applications.

· Onboarding & Offboarding: Set up and configure new employee workstations, ensuring access to necessary tools and software. Assist with the offboarding process by removing access and reclaiming equipment.

· Asset Management: Track and manage hardware and software inventories, keeping an up-to-date record of all workplace equipment.

· Vendor Coordination: Work with external service providers and vendors to ensure the timely resolution of issues and successful implementation of upgrades or new services.

· Space Planning: Collaborate with Facilities Management to plan and execute office layout changes, seating arrangements, and the setup of new office locations.

· Security: Ensure that all workplace systems adhere to company security protocols, including monitoring for vulnerabilities and implementing necessary patches or updates.

· Project Support: Participate in workplace technology and office infrastructure projects, helping with planning, coordination, and execution.

· 2-5 years of experience in workplace services, IT Support, or facilities management.

· Strong understanding of office infrastructure, IT systems, and workplace technologies.

· Experience with video conferencing tools (Zoom, Teams).

· Excellent troubleshooting and problem-solving skills.

· Strong communication and interpersonal skills to collaborate effectively with teams and employees at all levels.

· Ability to work independently and manage multiple tasks and priorities.

· Customer-oriented with a proactive approach to resolving workplace issues.

· Strong attention to detail and organizational skills.

Flexibility to adapt to changing business needs and priorities.

Responsibilities:

• Coordinate and supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical or in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and a team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

☑ Basic $5000 - $7000

☑ Permanent role + High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm )

☑ East Area, Tampines

☑ Semiconductor Plant Construction

☑ MNC Builder

Job Description:

• Oversee project planning, scheduling, manpower allocation, and progress monitoring for semiconductor plant construction.
• Manage budgets for materials, manpower, and machinery, addressing delays or site emergencies effectively.
• Collaborate with Project Managers, Engineers, clients, and authorities to resolve site and compliance issues.
• Ensure safe, economical methods and strict adherence to project standards for smooth operations.

Requirements:

• Min. 3 years of experience in construction, preferably in semiconductor plant projects.
• Degree in Engineering/Architecture or equivalent qualification.
• Strong prioritization skills, ability to work independently, and meet tight deadlines.
• Flexible to work night shifts, weekends, and public holidays as needed.

Interested applicants are welcome to apply online with updated Resume to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492