The Assistant Chief Engineer supports the Chief Engineer in maintaining overall maintenance operations of entire Hotel facility, including guest rooms, all mechanical, electrical, H.V.A.C. systems, fire protection system, kitchen equipments, emergency power system, sewage system and related equipment in accordance with guest service, preventive maintenance and energy conservation standards and programs. Ensure the upkeep of guest and service areas to maintain them in proper working order and appearance, this position must be able to work independently as well as with others.

Responsibilities

• Implements and maintains preventive maintenance and energy conservation programs for guest rooms, public areas, back-of-house, mechanical equipment, building systems, etc.
• Ensures compliance with international standards, local regulations, and other environmental considerations including but not limited to workplace safety and security practices.
• Implements hotel maintenance procedures and conducts training in order to achieve property maintenance and guest service objectives.
• Manages departmental operations and capital projects to achieve budgeted goals.
• Supervises all senior technicians, technicians and craft men to ensure high quality preventive, corrective and guest demand maintenance services are provided
• Supervises all Team Leaders, Senior Technicians and Technicians to ensure high quality preventive, corrective and guest demand maintenance services are provided.
• Reports any faults and renders assistance as and when required by department head / hotel management and takes on any responsibilities and tasks as assigned by supervisor and hotel management
• Conducts walk through and visually assesses the safe and efficient maintenance and operation of the physical aspects of the hotel, including guest rooms, public areas, all mechanical, electrical, H.V.A.C. systems and any other related equipment.
• Assists on routine preventive maintenance on equipment under the direction of Chief Engineer. This includes guest rooms, public areas, meeting rooms, ballrooms, outlets and back of house, laundry & kitchen equipment, heating, and air handling units, ice machines, fire extinguishers, fire equipment and plumbing etc. These are performed as required by the manufacturer and in accordance with the warranty specifications.
• Champions work order assignment program for to complete work orders. Prioritizes and completes work orders in a timely manner. Monitors all deficiencies. Communicates to the requesting party upon completion when needed.
• Carries out inspection of guest rooms after Preventive Maintenance. Reviews any problems with the Preventive Maintenance team and recheck room/suite before releasing to Housekeeping/Front Office.
• Assists in developing, implement and manage emergency programs for the operation and maintenance of all equipment and physical structures in compliance with corporate standards, local, state and national codes and regulations to protect the asset, guests and associates, to ensure optimum operations, minimize expenses and maximize customer satisfaction.
• Responsible for the short and long term planning and day-to-day operations of the Engineering Department.
• Reports to Chief Engineer, on a regular basis, regarding the specific and overall condition of the building structures, guest areas, service areas, related systems and equipment offering prudent and cost effective proposals for maintaining the same. Reviews reports, and initiates appropriate actions to carry out maintenance work effectively and efficiently.
• Ensures maintenance of swimming pool, water features and spa are done according to manufacturer specifications; PPHG standards and local Health Department Regulations.
• Promptly responds to guest requests in a friendly manner and follow up to ensure highest quality of service to guest satisfaction at all times.
• Responsible for any other tasks assigned by Chief Engineer or Director of Operations.

Requirements

• Degree in Engineering or Diploma in Hotel & Leisure Facilities Management, or any other combination of education, training, or experience that provides the necessary knowledge, skills, and abilities to perform the job.
• Minimum of five (5) years with advanced knowledge of building management/engineering experience in international five star hotels.
• Hands on experience on troubleshootHVAC operations, repair and maintenance; electrical controls and equipment maintenance, mechanical applications and building management system etc.
• Strong understanding of building life safety system and energy management systems.
• Strong knowledge and hands on experience on troubleshoots commercial kitchen equipments and meat processing equipments.
• Strong Leadership qualities
• Flexible and able to adapt to fast pace environment
• Strong team player
• Innovative and resourceful
• High levels of flexibility, adaptability and ability

PARKROYAL COLLECTION Pickering, Singapore is dedicated to providing equal employment opportunities, including individuals with disabilities.

We regret that only shortlisted candidates will be notified.

Job Description:

POSITION OVERVIEW : Software Development Analyst

POSITION GENERAL DUTIES AND TASKS :

Sound knowledge of operating Systems (like LINUX).

Understanding all stages of software Development.

Supporting incident escalation and troubleshooting.

Documenting processes and related knowledge.

Evaluating incidents after resolution.

Understanding data processing pipelines.

Aware of DevOps concepts and best practices.

Expertise in CI/CD implementation

Experience in Issue troubleshooting .

Communication & Collaboration skills.

Good knowledge of Cloud-native applications.

Good understanding of “Distributed computing”

The role of the Principal Engineer is to assist the Head of MRO in planning and supervise MRO engineer. This role also needs to ensure and adherence to safety regulations, industry standards and trade compliance activities is carried out.

Primary Duties:

Reporting to Head of MRO, you will have the following key responsibilities:

• Assist the MRO Head in planning and executing MRO strategies, ensuring all activities align with organizational goals.
• Supervise MRO engineers, providing guidance and support to foster a high-performance culture within the team.
• Coordinate and liaise with customers on any MRO related matters.
• Identify areas for process improvement and implement best practices to enhance operational efficiency and reduce downtime.
• Ensure adherence to safety regulations, industry standards, and organizational policies throughout MRO operations.
• Assist in the development and management of the MRO budget, tracking expenditure and identifying cost-saving opportunities.
• Analyze maintenance metrics and performance indicators to inform decision-making and improve reliability of equipment.
• Liaise with suppliers and service providers to ensure timely availability of parts and services needed for maintenance activities.
• Support the training and development of MRO staff to enhance skills and knowledge in maintenance practices.
• Ensure adherence to all domestic and international trade regulations, including customs laws, export controls, and sanctions.
• Perform regular audits of trade activities and transactions and prepare reports for management and regulatory bodies.
• Oversee the maintenance of accurate and comprehensive records related to trade compliance activities

Key Attributes and Skills:

• Strong leadership and interpersonal skills.
• Excellent analytical and problem-solving Abilities.
• Strong organization skills with the ability to manage multiple priorities.
• Effective communication skills, both written and verbal.

Qualifications and Experience and Requirements:

• Bachelor’s degree in Electronics, Electrical, Mechanical Engineering, or a related field.
• Strong knowledge of international trade regulations, export controls, and customs compliance. (e.g. ITAR) or a related role is an advantage.
• Occasional overseas travelling is required.

Position Overview:

We are seeking a skilled Physical Design Engineer to join our team. As a Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Assist in the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 2-4 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Job Description

• Perform system configuration, testing, and commissioning of integrated audiovisual and videoconferencing solutions
• Collaborate with inhouse teams and engineers from different manufactures like Samsung, BOSE, Crestron, Extron, Poly, Logitech, etc to deliver fully integrated solutions for venues like meeting rooms, lecture halls, experience centres, command centres, auditoriums, ballrooms, etc.
• Analyse schematic drawings to understand technical and functional requirements for each solution implement
• Conduct end-user training sessions on the implemented solutions
• Assist in providing after sales services and support

Requirements

• ITE/ Diploma in IT, Engineering, or Audio Visual related fields
• Certification in CTI-P101, CTI-P201
• Must have minimum 2 years of experience in System configuration, Testing & Commissioning for Audio Visual solution
• Experience in Crestron, Extron, AMX, Kramer automation programming
• Experience in some of the products like Videowall, LED & LCD Display, Digital Sound Processor (DSP), Amplifier, Speaker, videoconferencing, Audio Visual Switches
• Experience in similar renowned AV brands like Samsung, Crestron, Extron, BOSE, Ev, Poly, Cisco, Logitech, etc

Job Title: Senior Project Engineer

Location: Singapore

Industry: Oil & Gas

Employment Type: Contract

Start Date: January 2025

Duration: 1-year

NES Fircroft has partnered with our client, a leading Oil & Gas company dedicated to innovation and providing comprehensive industrial solutions, to seek a Senior Project Engineer to join the team.

Main Duties:

Supervise & Coordinate project’s day to day activities including installation and coordination with consultants, main contractors and subcontractors.

Guide, provide inputs and comments, for the drafter to prepare installation plan drawings, detailed drawings for mechanical parts like piping layout, piping isometric drawing, pipe supports, process and mechanical plan drawings.

Controls project plan by reviewing design, specifications, and plan and schedule changes, recommending actions.

Check, confirm all safety documents and issue work permits to contractors in collaboration with site safety officers, work permit requirements will be trained by in-house team

Assist project manager or procurement in charge in preparation of tender documentation, procurement specification and Bill of quantity.

Manage and coordinate vendors and suppliers during commissioning and testing of the equipment and systems.

Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation.

Conduct Toolbox meetings with safety officers onsite and maintain records.

With sound knowledge of process piping installation and equipment installation.

Able to work with drafters to produce Piping drawings, installation drawings, details design.

Qualifications:

Graduate of Bachelor's degree in Mechanical or equivalent engineering education.

Experience:

1) Has work experience in Micron Semiconductor
2) Experience in running and leading project > S$10mil project
3) Good team player and communication skills
4) Good understanding in AutoCAD drawings and project work flow
5) Proficient in English

Role Summary:

As a Principal Software Engineer on our team, you’ll play a key role in supporting our digital transformation journey as a senior specialist in our development team to build and implement large-scale applications involving APIs and UIs that will be leveraged across the business. You’ll be both hands-on and strategic, diving deep into code to define system behavior, and establishing technical roadmaps that you and the developers on your team will act upon to deliver quality and scalable software solutions. You will also have the opportunity to directly engage with senior leadership as you communicate back and forth with the business to ensure these software solutions align with business objectives.

Education and Experience:

• Background in computer science, information systems or bachelor’s or master’s degree in computer science, Information Technology, Computer Engineering, Software Engineering, or a related field.

• Insurance/Financial services background preferred.

Responsibilities:

• Leading proof of concept initiatives with Solution Architects as required.

• Create and maintain technical architecture documentation for solutions.

• Define development standards and tooling for the squads.

• Partner with business stakeholders to translate business requirements into consumable technical stories and software solutions.

• Participate in solutioning and estimation activities for upcoming opportunities.

• Mentor a team of software developers to build quality software solutions aligned to architecture guidelines.

• Deep dive on technical solutioning or troubleshooting with the Tech Leads and Squads as required.

• Provide debriefing and support to Tech Leads and Developers on POCs that are being handed over to Sprints for full implementation.

Functional Competencies:

• Able to provide technical excellence while embracing flexibility over building “bulletproof” systems.

• Passionate learner who keeps up with evolving technologies and is willing to experiment to test what would work for the business.

• Experience in or willingness to learn Agile methodology and working in a cross functional team.

Technical Competencies:

• 15+ years of hands-on, full-stack development experience building high performance, scalable and reliable software applications using Java and Microsoft technology stacks.

• Experience in Angular for front-end development including Single Page Application and Micro-Frontends.

• Deep understanding of SQL Server, including database design models, database performance optimization and the ability to develop and maintain PL/SQL Packages, Stored Procedures, Triggers, and Functions in SQL Server

• Demonstrated experience developing REST based APIs using Microservice architecture, Open API Specification and/or creating specifications w/Swagger.

• Experience in containerizing applications using Docker & Kubernetes

• Previous experience with cloud solutions (Azure preferred) along with experience configuring DevOps/continuous integration and continuous deployment (CI/CD) pipelines using tools such as Git, Jenkins and/or Maven.

• Experience in monitoring and logging tools such as ELK and Prometheus.

• Experience with secure SDLC and application security & compliance.

Our client, a well-known Japanese company is looking for candidates for the Process Engineer position.

Responsibilities: -

• Provide support to customers’ engineers on the development of Dry Etch process
• Develop new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products
• Coordinate design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods
• Compile and evaluate test data to determine appropriate limits and variables for process or material specifications
• Develop and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes
• Work closely with cross-functional engineering teams to troubleshoot processes and integration problems

Requirements:

• Degree in Chemical/Materials Science Engineering or its equivalent
• At least 2 years of relevant experience in the development of Dry Etch process
• Experience in Project Management will be an added advantage
• Strong communication and good interpersonal skills
• A meticulous, organized and resourceful team player
• A highly motivated individual who works independently with little supervision
• Work in cleanroom environment

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | RCB No. 200007268E

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Piping CAD Engineer for a Marine Offshore & O&G company:

Our client’s principal activities are to provide Clients with Full Turkey Project Management. This includes engineering, project management through the pre-construction planning, critical path development, construction / fabrication / site management, commissioning and hand over. They are looking for a Piping CAD Engineer.

Job Highlight

· Permanent role| 5.5 days’ work week

· Competitive compensation benefits

· Good career advancement opportunities

· Conductive & friendly working environment with cultural diversity

Role & Responsibilities

Responsibilities

· Create shop drawings based on client given information, specifications, calculations and drawing to incorporating all details of shop drawings

· Make the drawings in keeping with company standards

· Provide MTO based on drawing details

· Read P&ID drawings, update as-building (e.g., redline)

· Maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/ Leads

· Explain drawings to production or construction teams and provide adjustments as necessary

Requirements

· Degree/Diploma in Engineering (Naval Architecture / Marine and Offshore / Mechanical / Electrical Engineering)

· Minimum 3 years of experience in Marine or Oil & Gas industry in the same field

· Spoolgen experience and expertise in HVAC design

· Knowledge and experience with HVAC (Design) systems

· Able to read P&ID drawings, update as-built (e.g., redline)

· Must have hands on knowledge on AutoCAD

· Good time management and able to work under pressure

Job Related Information

Permanent - 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm

Office Location: 59 Gul Circle| Singapore 629354

Salary & Benefits

· Monthly Basic Salary: Based on expertise, academic qualification and skills

· OT pay entitlement: OT Flat rate S$8/- per hour

· Healthcare benefits such as Outpatient, Dental, Health Screening etc.

· Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy

· Variable Bonuses

· 14 days Annual Leave and 14 days sick leave

· Birthday leave / Festival eve half day leave

· NTUC membership – Applicable for only Permanent confirmed staff

· Company transport is available @ various pick-up points

NB

· NO QUOTA FOR THE FOREIGNERS PLEASE.

· This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.

Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role@ [email protected]

Venture Cove Pte Ltd| EA License 21C0547

65 Chulia Street, #46-00 OCBC Center, Singapore 049513

LinkedIn: http://www.linkedin.com/in/venture-cove-681891249/

Website: http://www.venture-cove.com/

Please apply here: https://talent.sage.hr/jobs/b0aa80ab-6951-4717-b49e-37ac3c199206

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for Machine Learning Research Engineers with the following backgrounds:

- Generative Modelling (particularly LLMs and multi-Agent systems)

- Data science

- High-performance Computing

- Data-driven personalised healthcare

- Model-based personalised healthcare (e.g. pharmokinetic modelling)

- Translational and regulatory expertise in medical devices

As a Machine Learning Research Engineer, the successful candidate will contribute to the programme by developing and implementing novel machine learning algorithms with focus on security and data privacy, as well as translating recent AI advancements to the healthcare setting.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Your new company
Our client is an accomplished multidisciplinary consultancy that offers a wide range of professional services. As a leader in the industry, they tackle complex challenges with creativity and innovation, balancing design, function, and cost. They have been going through growth mode in recent years and are now looking to expand their headcount with a Mechanical/Electrical engineer.

Your new role
A few of your responsibilities would be ;

· Collaborate with project teams to plan and design mechanical/electrical engineering solutions for building services.

· Prepare comprehensive reports, specifications, calculations, and detailed drawings for various project stages.

· Conduct design presentations and address any discrepancies or modifications.

· Review shop drawings and material/equipment submissions.

· Handle Requests for Information (RFIs) and other contract administration duties.

· Manage installation, testing, and commissioning of mechanical/electrical engineering systems to ensure quality and compliance.

What you'll need to succeed

· Bachelor’s degree in Mechanical/Electrical Engineering or any related field.

· Open to fresh graduates.

· Proficiency in mechanical/electrical engineering design systems software and familiarity with AutoCAD and/or Autodesk Revit is advantageous.

· Possess the inclination to join the Construction and Building Services industry.

· Adaptability to work both independently and as part of a team.

What you'll get in return
You'll be offered professional development opportunities, attractive remuneration, and comprehensive on-the-job training will be given to you. You’d be a part of a growing team that will support you throughout your career.

What you need to do now
If you feel like you meet the above requirements or know someone who does, then click on the link to apply, or, you may send your application/referral directly to me at [email protected].

If this job isn't quite right for you but you are looking for a new position, please contact me for a confidential discussion on your career.

Engineer (Terminal Operations Maintenance)

As a key member in the Terminal Operations team, you will assist to oversee the maintenance activities of the terminal with specific attention to quality, safety and emergency, compliance with regulatory / insurance / statutory requirements, and other administrative functions, hence, ensures division remains a profit centre for the organisation.

Job Responsibilities:

· Develop and oversee preventive maintenance schedules to ensure fuel storage tanks, pipelines, and associated equipment function optimally.

· Coordinate regular inspections and manage maintenance activities and resources to avoid disruptions in storage operations.

· Ensure the availability of the terminal and equipment is maximised.

· Ensure all maintenance work complies with industry regulations, environmental standards, and safety protocols.

· Conduct risk assessments and implement safety procedures, emergency response plans, and training for team members.

· Coordinate and lead relevant functional stakeholders on diagnostic checks and perform repairs on mechanical, electrical, and control systems associated with storage tanks and fuel distribution.

· Respond swiftly to any issues to minimize downtime and maintain operational efficiency.

· Maintain detailed records of maintenance activities, inspections, and repairs, and prepare reports on facility performance and safety compliance.

· Ensure documentation is current for regulatory audits, inspections, and internal reviews.

· Assist Tank Management leadership in formulating and executing of Tank Management Maintenance Strategy.

· Lead and update the Maintenance Management System of all maintenance master data such as assets master, equipment master, maintenance checklists, maintenance schedules.

· Identify opportunities to improve efficiency and reduce costs, while enhancing the reliability and safety of fuel storage operations.

· Stay updated on industry best practices, new technologies, and regulatory changes to keep maintenance practices current.

· Foster a safety-first culture by providing ongoing training on protocols, equipment usage, and emergency response.

Job Requirements:

All Candidates

• Fresh graduates are welcome to apply.
• Degree or Diploma in Mechanical Engineering or equivalent.
• 2 to 3 years of relevant experience is a plus.
• Demonstrates strong management and leadership qualities, with the ability to work independently and think critically.
• Self-motivated, resourceful, and committed to continuous self-improvement, with strong analytical and communication skills.
• Possesses good working knowledge of safety and statutory requirements.
• Strong analytical and problem-solving skills, with the ability to diagnose and resolve maintenance issues under time-sensitive conditions.
• Available to be on standby after office hours in response to any emergency.

Experienced Candidates

• Prior experience in a supervisory or lead role, especially in maintenance, with proven team coordination and communication skills is advantageous.
• Strong technical aptitude in maintaining and repairing fuel storage systems, including tanks, pumps, valves, and piping.
• Ability to interpret technical drawings, schematics, and manuals related to fuel storage systems.
• Competence in conducting risk assessments, identifying potential hazards, and implementing preventive safety measures.
• Experience in Maintenance, Repair, and Overhaul (MRO) activities.
• Familiar with using maintenance management systems such as Maximo and SAP.

Skillset : Azure, Professional, Cyber Security Governance, Risk & Co

• Familiar working with Microsoft Azure
• Day to day security monitoring on the Azure security alerts, DSM alerts and any other custom alerts related to security.
• Day to day operation of administration and support on Microsoft Cloud Defender, Logs Analytics Workspace, Network Security Groups and Azure Trend Micro Cloud One
• Incident management and resolution, raising tickets to Microsoft and Trend Micro to support and rectify any problems.
• Software upgrade of TrendMicro Cloud One to remediate any vulnerabilities and to get the most out of security administration enhancement
• Support on the vulnerability management in GCC to recommend the mitigation actions to the system OIC and GCC infra
• Conduct queries on the log analytic to support cyber proactive investigation as per Cyber needs.
• Some Knowledge of scripting , az cli, PowerShell , KQL and Logic Apps is advantageous

• In-house Support IT
• Support and maintain WAN/LAN network links and equipment's
• Administration of the Servers
• Support and maintain the Firewall System
• Fault diagnosis and resolution of software and system errors on the desktop
• Fault diagnosis of desktop hardware and co-ordination of repairs and replacements
• Software installation and decommissioning of desktop hardware
• Outdoor / Onsite Project Support for IT Related Products
• Interactive Panel Firmware update
• Network Devices Firmware update
• IP configuration of network devices
• Support Product Preventive Maintenance
• Any other task assign by Superior

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Capacity Planning Engineer

Smart IMS is a leading provider of information technology solutions, offering a wide range of services to businesses worldwide. With a strong focus on innovation and customer satisfaction, we help organizations streamline operations, improve efficiency, and achieve their strategic goals.

We are currently looking for a Capacity Planning Engineer to forecast sufficient vendor resources for Hosting and Network Services partners.

Responsibilities:

- Develop automation for reporting needs.

- Responsible to Work Queue status reporting and Capacity Reporting

Requirements:

- Proficient in Capacity Planning

- Familiar with report automation

Additional Information:

- Location: HarbourFront

- Working hours: Monday to Friday, 9 am to 6 pm.

- Competitive salary commensurate with experience, with 14 days of Annual Leave and above market medical coverage / insurance.

- Start off as a 1-year contract with 2 months' notice period.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Civil and Environmental Engineering at the National University of Singapore is recruiting a Research Engineer. The successful candidate will work on experiments and numerical modelling of 3D breaking waves and wave-current interaction. The candidate should have strong knowledge background in terms of waves, currents, turbulence, etc. Experience with experiments and CFD model will be advantageous. Only shortlisted applicants will be notified.

Job Requirements

• Possess at least a Masters degree in Civil Engineering with related research experience.
• Candidates with background in fluid mechanics, coastal and ocean engineering, experimental methods are encouraged to apply.
• Strong written and spoken communications.
• Good in quantitative analysis.
• Strong written and spoken communications.
• Good knowledge of CFD analysis and programming skill is an advantage.
• Open to fixed-term contract.

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

RESPONSIBILITIES;

• To done a stage wise inspection of (FITUP inspection, WELDING inspection and PDI (predelivery inspection).
• Ensure the stage wise IPV (In process validation) and prepare regular written QC & QA report
• submitted to the customer.
• Final inspection - Ensure the body visual orientation and materials against the customer IPV(In
• process validation).
• Responsible for documentation process for customer CAT (caterpillar) provide standards prepare
• quality document to every inspetion stage.
• Check the incoming materials by confirming specifications conducting visual and measurement
• tests rejecting and returning unacceptable materials.
• Ensure the Incoming stock material Quality and then give aprove for the stocks through the
• provided SAP (System application product).
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

Qualifications for Mechanical Engineer

• Bachelor's degree in mechanical engineering or in a related field
• Firm grasp of engineering concepts, and experience desiging mechanical systems and products
• Excellent math skills: ability to apply advanced mathematical principles and statistics to solve problems
• Experience using CAD software such as SolidWorks, AutoCAD, or similar
• Exceptional technical and problem-solving skills and reasoning ability
• Ability to communicate effectively and clearly
• Must be self-motivated and a great team worker

Position: Senior Software Engineer
Working Location:Tai Seng
Working Days:5days (office hours)
Salary Range:$6,500 – $8,000

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Job Scope:

Software Development

• Design, Develop and Maintain device drivers for Windows Operating Systems
• Undertake WHQL testing and certification of drivers and device frameworks.
• Design, Develop and Maintain User Libraries and DLLs.
• Participate in all phases of SDLC and prepare corresponding documentation
• Undertake porting and maintenance of existing drivers to new frameworks and OS’s
• Resolve defects reported by internal and external customers
• Collaborate with USB host & device firmware development teams.

Job Requirement:

• Degree/Master’s in computer science/Engineering or related field.
• 5 years or above experience in the area of device drivers development, preferably USB
• In-depth understanding of WDM and KMDF frameworks, multi-threading and DLLs
• Excellent C Programming Skills.
• Professional attitude to work and meticulous in coding and testing
• Must have participated and experienced in SQA processes.

COMPANY DESCRIPTION

About the Company

JERA Global Markets (JERAGM) is a leading utility-backed seaborne energy trader specialising in LNG, coal and freight. A joint venture between majority shareholder JERA Co., Inc. and EDF Trading, JERAGM's shareholders are among the world's major utilities.

JERAGM operates one of the largest energy portfolios in the world which gives it an in-depth understanding of the way local, regional and international energy markets behave. Its in-depth knowledge and market insights enable us to capture trading opportunities, optimise portfolios, create value and enhance security of supply for our customers.

Headquartered in Singapore, JERAGM has a global talent pool of close to 300 people across offices located in four strategic locations: Singapore, Japan (Tokyo), the UK (London) and the US (Houston).

JERAGM is strongly capitalised with over US$500 million in paid up capital and a total equity of US$4 billion. JERAGM has retained its A+ Stable rating from R&I, attributable to a robust business model and solid financial base.

RESPONSIBILITIES

JERA GM is implementing a series of new IT systems to reduce its reliance on its shareholders for IT services and to enable the rapid growth into a global leader in the trading of fossil fuels.

At the core of the system landscape is a set of vendor systems that support critical business activities such as trading, risk management, pricing, and logistics. JERA GM have and will continue to make significant investments building on top of these systems to tailor them to the specific needs of its business. Up until now, this work has been performed by teams of consultants. JERA GM would like to develop an in-house capability, so they can be self-sufficient in the ongoing development on this platform.

This in-house capability needs to be able to extend, customise, configure and integrate these systems to meet the ongoing needs of the business. They will also support the development of new bespoke systems, such as for business intelligence and decision support, to meet needs not provided by the vendor systems.

The Core Platform Software Engineer will:

• Work to obtain excellent business knowledge of the full transaction cycle within a multi-commodity energy trading environment such that they can converse directly with users and other stakeholders with minimal hand-holding from Business Analysts.

• Develop new features on the company's credit system (Cubelogic) and ETRM (Energy Trading and Risk Management) system to support the company's growth (new products, new processes), in a Python/Azure (Databricks & ADF)/C# / SqlServer environment.

• Demonstrate a broad set of technical skills including expert database development and administration, Python/.NET/C# development and Powershell Automation/Devops skills.

• Build new features on the various applications that revolve around the Cubelogic/ETRM (APIs, loaders, reports, BI). It is most important that they have the ability and desire to rapidly pick up a diverse range of technical skills to support challenges as they arise. They will be actively required to work with challenges using technologies such as Azure IaaS/PaaS, Python, Databricks, Power BI.

• Apply their strong software engineering skills to:
  • Improve the ability to integrate vendor systems together.
  • Improve the ability to unit test customisations of vendor systems.
  • Improve the structure the source of such customisations.

• Work with JERA GM IT to evaluate the quality of the existing vendor system customisations and build out a prioritised backlog of improvements. Work to then safely improve the code estate to improve its flexibility and maintainability.

• Support efforts to improve end-to-end test automation and continuous integration across the application estate.

• Have a strong engineering focus and eye for high quality delivery. They will be expected to deliver high quality software and adhere to modern software engineering practices. They must also be driven to automate everything as this is ingrained in the culture of the team.

• Work within a hybrid internal/consultant/vendor team to deliver a backlog of new features, enhancements, bug fixes and integrations to support the ongoing needs of the LNG and Coal trading businesses. Demonstrate a strong ability to self-organise when required.

• Work collaboratively with the rest of the JERA GM technical team, whilst also demonstrating end-to-end ownership of entire problems where required.

• Show a highly proactive attitude in learning and immersing themselves in the vendor platforms with the aim of gaining an expert knowledge of how to develop and support extensions and integrations.

• Be comfortable with agile delivery modes such as Scrum or Kanban but also be flexible to work with whichever delivery approach works best for the problem at hand.

• Provide 3rd line production support.

Skills and Experience required

• 5-10 years of overall experience with advanced level of coding experience in either Python or C# with good knowledge of other.
• Strong experience in SQL, & PowerShell
• Modern cloud-based system architectures and technologies such as Data Lakehouse using Databricks, Azure functions and ADF
• Experience with C# .NET
  • Good understanding of the core language and framework
  • Service oriented development (WCF, Rest API, GraphQL)
  • Data access development (ADO.NET, EF or equivalent such as NHibernate)
• Extensive SQL Server database design and development skills (excellent SQL skills assumed). A good working knowledge of database performance optimisation is also required.
• Familiar with knowledge of Azure services including VNET, Key-Vaults, Azure Data Factory, ADLS Gen2, Virtual Machines, App Services, Storage Accounts and Azure Active Directory
• Orchestrating data pipelines using Azure Data factory
• Strong conceptual understanding of Big Data, Map-Reduce, Spark, file formats such as Parquet, Avro, ORC etc.
• Reporting tools such as Power BI
• Knowledge of JavaScript/UI framework like Angular/React.
• Cloud experience in Azure or AWS
• Experience with Windows Server infrastructure
• Experience working with agile delivery methodologies such as SCRUM or Kanban.
• Experience with Microsoft-based BI stack, including SSIS, SSRS and Power BI is desirable.
• Experience with Azure PaaS and IaaS and corresponding automation toolkits is desirable.
• Experience in Allegro ETRMs is desirable.
• Experience in Cubelogic is desirable.
• Proven work experience in the energy trading, commodities trading or corporate banking sector

• Highly motivated to continually develop skills and techniques to ensure the best tools are used for the job. Support, resources and technical mentoring will be provided by JERA GM as required.

• Highly motivated to deliver results and ‘go the extra mile' to meet deadlines.

• Able to multi-task with minimal supervision and highly structured and organised in the way tasks are approached.

• Excellent communication skills.

• Strong academic background, educated to degree level and/or equivalent professional qualification or relevant business experience.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Singapore, Jakarta, Seoul and Tokyo.

Creation is the core of TikTok's purpose. Our platform is built to help imaginations thrive. This is doubly true of the teams that make TikTok possible.

Together, we inspire creativity and bring joy - a mission we all believe in and aim towards achieving every day.

To us, every challenge, no matter how difficult, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At TikTok, we create together and grow together. That's how we drive impact - for ourselves, our company, and the communities we serve.

Join us.

About the Team:

TikTok Live Revenue Team is responsible for building the cutting-edge revenue ecosystem which includes gifting and other revenue features that are innovative, secure and intuitive for our users. We focus on bring out more meaningful features with the help of various front-end technologies. what you will build also affect millions of users and live streamers.

Responsibilites

1. To develop user-interfaces for TikTok Live on PC/ Mobile Devices, including Middle platform, Operating platform, Products for users, Events with Multi-scales and etc.

2. To develop infrastructures such as engineering solutions that will be supporting TikTok Live's business and productivity tools and platforms.

3. Create the ultimate user experience and support the growth and development of the TikTok Live Ecosystem with high-quality design and coding.

4. Explore and implement efficient collaboration methods to enhance the efficiency of remote and cross-regional communication and support the iteration of our business.

Qualifications

Minimum Qualifications

- Computing related major, bachelor degree.

- Proficient in front-end technologies such as JavaScript/HTML/CSS, understand the operating principle of the browser, and be able to develop independently without Front-end libraries;

- Familiar with front-end mainstream frameworks, JS libraries and related ecological tools, such as: React/Vue/AngularJS, etc., understand their design principles and application scenarios;

- Familiar with front-end engineering and modularisation development, and have experience in large-scale application development and maintenance;

- Familiar with various front-end related debugging and testing tools, and have independent problem-solving skills;

- Familiar with front-end and back-end collaboration mode, have good abstract thinking, and have a certain understanding of algorithms and data structure;

- Have good communication skills and teamwork spirit, strong sense of responsibility, positive and optimistic attitude;

Preferred Qualifications:

-Minimum 3 years of front-end experience;

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

TikTok is the leading destination for short-form mobile video. Our mission is to inspire creativity and bring joy. TikTok has global offices including Los Angeles, New York, London, Paris, Berlin, Dubai, Mumbai, Singapore, Jakarta, Seoul and Tokyo.

Why Join Us

At TikTok, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for more than 1 billion users on our platform. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at TikTok.

We are looking for passionate and talented engineers to join us to build up and optimize a real-time, high-performance, large-scale distributed infrastructure for live streaming at TikTok. We will be deeply involved in the developmental lifecycle of critical product features, and collaborate closely with product managers to deliver the best live streaming experience for live streamers and viewers.

TikTok LIVE Revenue Engineering team is responsible for building a cutting-edge revenue ecosystem that includes innovative, and intuitive gifting and other revenue features. This ecosystem also encompasses a range of interactive games and activities designed to stimulate user spending. As a vital member of the engineering team, you will develop solutions that impact millions of users and live streamers.

Responsibilities:

- Develop TikTok LIVE gifts include 3D model rendering, animation implementation and interactive implementation.

- Development of interactive games for TikTok Live events.

- Optimise 3D gift performance and research the best practices of 3D rendering on mobile devices.

- Design and develop gift production tools and workflow to reduce the cost of gift production.

- Contribute innovative ideas towards gift creativity and explore graphic interactive technology that can be implemented in business.

Qualifications

Qualifications:

Minimum Qualifications:

- Bachelor's degree in Computer Science, or related technical field.

- Experience and knowledge of computer graphics.

- Problem-solving and communication skills.

- Experience with JavaScript, TypeScript, with solid coding ability and good abstract ability.

- Passionate about Web 3D graphics rendering and animations.

Preferred Qualifications:

- Strong on WebGL, GLSL, Three.js, Babylon.js, PixiJS, Cocos Creator etc.

- Experience with advanced techniques in real-time rendering, character animation, physics simulation and geometry modelling.

- Experience with modern mobile graphic pipeline.

- Experience with web game developement.

- Experience with low-level performance profiling and optimization.

- Experience with 3D software such as Blender, C4D and game engines such as Unity, Unreal.

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

Role:

Engineer (Construction)

• Singapore Based (City Hall / Site)
• 5 Days work per week (8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT))
• Salary: $5000 to $7500
• Minimum of 5 years of relevant site / building construction experience.
• Career Progression Opportunities

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

#SCR-vicky-wee

✅ Wee Yuan Huan
✅ Reg No: R21100383
✅ The Supreme HR Advisory Pte Ltd
✅ EA No: 14C7279

FIELD SERVICE ENGINEER

Job Responsibilities:

• Provide on-site software installation and technical support to customers, resolving complex issue related to automation software systems.
• Diagnose and troubleshoot hardware/wiring and software problems in a timely and efficient manner.
• Communicate technical solutions to customer in a clear and concise manner.
• Provide training and guidance to customer on issue resolution.
• Maintain accurate and up to date user/training and troubleshooting manuals.
• Travel to customer sites (including international sites) to provide hands-on technical support.
• Dynamic work-shifts may be required on need basis.

Job Requirements:

• Degree in Electrical/Electronic Engineering/Computer Science/Software Engineering.
• Minimum 2 years' experience in related field.
• Experience in software testing and maintenance.
• Excellent communication and customer skills.
• Ability to work under pressure and in a dynamic environment.
• Strong software troubleshooting skills in Windows and Linux Environment.
• Experience in automation software support and maintenance is an advantage.
• Ability to develop software scripts and troubleshooting tools is preferred.
• Knowledge of SECS/GEM and SEMI standards is a plus.
• Basic knowledge of relational databases, including MSSQL, MySQL and Oracle is an added advantage.