Job Role/Level Systems Engineer/Level 2

Skillset Category Common

Mandatory Skills CCTV knowledge, Electrical & Cabling (Power & Network)

Preferred Skills Contractor supervision, construction site safety, issue troubleshooting, mechanical and civil works knowledge

Brief Job Description The ideal candidate should possess:

• Diploma in Information Technology, Electrical / Electronic, Information Systems or equivalent discipline

• 1-3 years of relevant experience in security surveillance hardware and software administration, configuration, and troubleshooting

Roles & Responsibilities: 

 Good knowledge and hands on experience working with software and hardware systems in the area of:

• IP CCTV System

• Perimeter Protection System (PPS)

• Physical Security Information Management System (PSIM)

• Video Management System (VMS)

• Audiovisual System

 Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system.

 Work closely with team members to meet client’s service delivery level agreement

 Able to work and coordinates with contractors and clients

 Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance

 Understands technical documentation, installation manuals, system drawings etc.

 Able to read and orientate construction drawing, floor plan, etc.

 Continuously looking to improve processes as well as introduce new technologies for better security and greater customer satisfaction

 Proficient in electrical power and good knowledge on power cabling works for on-site works

 Understands technical documentation, manuals, as-built system drawings etc.

 Works independently without supervision and communicates well with team members, partners, and clients

 Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement

 Carries out any other technical related duties that may be required

 With knowledge on construction site safety and regulatory requirements

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Job Description & Requirements

Fast Flow is a highly specialised group of companies providing solutions for rainwater management in building projects across Asia Pacific.

Roles & Responsibilities

The Project Engineer is to support the Project Managers (PM) in the performance of their duties and coordination, site execution of rainwater system installations, testing and commissioning, to the successful handing over of project to clients.

JOB DESCRIPTION

- To assist the PM on multiple projects to programme and allocate manpower as required.

- Discuss inspection reports with the PM and ensure clear and accurate implementation of necessary actions and recommendations.

- Maintain records of inspections, actions and non-conformances.

- Assist in submission of shop drawings and material samples for conformance with project specification

- Assist PM in the planning of required, materials, plant, transport and equipment.

- Plan activities of allocated Site Supervisors and workforce under their control, in line with project requirements.

- Monitor Health and Safety on projects to ensure safe working practices are carried out in accordance to local regulations

- Ensure that projects are carried out within the labour and material budget parameters provided as advised by PM

- Check site progress and productivity, record and submit monthly progress claims for certification and payment.

JOB REQUIREMENTS

The successful candidate should possess a Diploma / Degree, or equivalent Technical certificate in Architecture / Mechanical / Civil or Building.

Preferably 2 year(s) of working experience in the related field.

A good communicator.

• Bukit Timah
• Up to $4000 + Bonus
• Contract (renewable/convertible)
• Monday to Friday (Officer Hours)

Job Responsibilities:

• Plan and supervise contractors for M&E preventive maintenance works such as Crane/Air compressor/Fire protection system/Lift/Cooling tower/ Aircon/ Ejector pump, etc.
• Plan and supervise contractors for building services work such as cleaning/landscaping/waste management, renovation, etc.
• Troubleshoot faults and carry out corrective maintenance such as replace light tubes/fitting, install power points, etc.
• Conduct daily routine inspection for building/M&E facilities works
• Record meter reading to monitor electricity/water consumption.
• Ensure contractor comply with security and safety requirements for corrective and preventive maintenance works
• Raise Purchase Requisition for works/services by contractors/vendors
• Perform acceptance of services completed by contractor e.g. pest control, grass cutting, etc.
• Response to emergency call including after office hours e.g. power failure, fire incident, etc.

Requirements:

• Higher Nitec or Diploma in Facilities Managements or Mechanical/Electrical Engineering
• At least 2 years experience in Facilities/M&E maintenance.
• Prefer Class 2 /3 driving license
• Able to work on weekends for critical repair works
• Able to commit for Alternate Saturday
• Singaporean Only

If you are interested, please click "Apply Now".

Thank you for your application and we regret that only shortlisted candidates will be notified.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.”

P-Serv Pte Ltd

EA License No: 90C3494

Uma Maheswari | Registration No. R2092012

You may also reach me at + 65 81278347 for further information.

Reporting to the Engineering Manager, the systems engineer will provide engineering design, technical configuration, drawing of various telecommunication systems.

He/ She will possess extensive knowledge and experience in Engineering design of telecommunication, safety & security and marine navigation systems covering technologies such as IP Infrastructure, WIFI WLAN, Firewall security, IP-PABX, PAGA, CCTV, VCS, TETRA/DMR UHF/VHF Radio, GMDSS Radio, GEO/MEO/LEO VSAT, IPTV, Radar, Gyrocompass and etc and provide engineering design, technical configuration, proof of concept as well as drawing instruction of various telecom systems.

Reponsibilites

• Take ownership of engineering design and make a truly access and understanding of client requirement and propose the right solution to fit the specs.
• Produce engineering document (VDRL) and close the client comments in a timely, high quality and accurate manner.
• Produce scratch drawing and guide the AUTOCAD drafter to come out the engineering drawing deliverables.
• Adapt the industrial standard and best practice into the engineering drawing preparation, design, review, and submission.
• Guide the in-house technician for equipment assembly and cabinet integration; implement the system configuration, simulation, testing and verification.
• Conduct factory acceptance testing (FAT) to client and provide in-house training to client as well as commissioning engineer.
• Any other ad hoc tasks required for business needs.

Requirements

• Minimum diploma in telecom or equivalent technical discipline
• Proven 4-5 years’ experience in a similar role within the industrial markets.
• Well organized documentation, time management skills
• Ability to articulate and share concepts with customers and suppliers.
• Ability to work with cross function teams and lead the team
• Objective driven, time-sensitive and resourceful
• Certificate of AUTOCAD will be added advantages.
• Site commissioning / radio surveying experience as per SOLAS / MODU will be added advantages.
• Ability to use various coverage tools such as CadnaA for PAGA, Ekahau for WIFI coverage, iBwave for UHF/GSM coverage will be added advantages.

Experience with GitLab CI/CD pipelines, Kubernetes (EKS), and Red Hat Linux administration. Exposure to AWS and cloud security practices is highly desirable.

Key Responsibilities:
Implement and manage CI/CD pipelines using GitLab.
Deploy, manage, and scale containerized applications with Kubernetes (EKS).
Perform routine system administration tasks on Red Hat Linux servers.
Implement and maintain AWS cloud security best practices.

Must-Have Skills:
Hands-on experience with GitLab and CI/CD pipeline configurations.
Proficiency in Kubernetes and Amazon EKS for container orchestration.
Basic/Good knowledge with Amazon Web Services(AWS).
Basic/Good knowledge of Red Hat Linux system administration

Nice-to-Have Skills:
Infrastructure knowledge of PEGA.
Scripting skills in Bash, PowerShell, or Python.
Knowledge of cloud security practices on AWS.
Familiarity with Ship Hats and the GCC 2.0 AWS environment.

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Highlight technical issues and update Construction Department on changes and distribute to vendors, engineers and supervisors.
• Plan and execute geotechnical and instrumentation installation and monitoring works.
• Site evalution of soil, rock, fault distribution and geological studies on site to determine their engineering properties.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum a Diploma, Degree in Civil Engineering, Geology or its equivalent.
• Preferably with a minimum of 2 years of relevant working experiences in construction industry.
• Proficient in Microsoft Office, AutoCAD and Geotechnical analysis software.
• Able to communicate effectively with Client, Consultants, Management and Subcontractors.
• Location: East

Job Description

We are seeking a skilled and proactive DevOps Engineer to join our team. The ideal candidate will have hands-on experience with GitLab CI/CD pipelines, Kubernetes (EKS), and Red Hat Linux administration. Exposure to AWS and cloud security practices is highly desirable.

Key Responsibilities:
Implement and manage CI/CD pipelines using GitLab.
Deploy, manage, and scale containerized applications with Kubernetes (EKS).
Perform routine system administration tasks on Red Hat Linux servers.
Implement and maintain AWS cloud security best practices.

Must-Have Skills:
Hands-on experience with GitLab and CI/CD pipeline configurations.
Proficiency in Kubernetes and Amazon EKS for container orchestration.
Basic/Good knowledge with Amazon Web Services(AWS).
Basic/Good knowledge of Red Hat Linux system administration

Nice-to-Have Skills:
Infrastructure knowledge of PEGA.
Scripting skills in Bash, PowerShell, or Python.
Knowledge of cloud security practices on AWS.
Familiarity with Ship Hats and the GCC 2.0 AWS environment.

Recommended:
Any certifications related to Kubernetes and AWS would be a great advantage."

EA Number: 11C4879

Job Description:
- Attend onboard for maintenance, inspection, repair, troubleshooting, and modification.
- Manage field activities and schedule.
- Resolve malfunctions.
- Oversee repairs and technical improvements.
- Install new systems and technology.
- Ensure proper maintenance of onsite equipment.
- Supervise and direct technicians/engineers onsite.
- Make service reports with details of job progress, working/traveling time, technical advice, and recommendations if any.
- Report and share job progress with the superior.
- Provide technical support and training for customers, service agents, and internal teams.
- Arrange necessary parts and drawings and send them to agents.
- Maintain tools in good condition for safety and high-quality service.
- Create manuals/support documents to share experiences with other engineers.
- Collaborate with team members to achieve better results.
- Gather feedback from customers or prospects and share it with internal teams.
- Review maintenance lists and service reports for sales support.
- Cover all Technician responsibilities.

Job Requirements:
- Minimum diploma in electronic/electrical engineering or relevant.
- Minimum 4 years of experience in vessel main engine automation systems or related field.
- Proficiency in relevant engineering principles, hands-on experience with equipment or systems, and good knowledge of electrical systems.
- Strong problem-solving skills and attention to detail.
- Ability to stay updated with the latest industry advancements and technology.

Compensation:
- Monday to Friday 9am to 6pm
- OT pays
- AWS
- Travel allowance
- Company phone provided
- 14 days AL
- Group insurance covered

• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During System Implementation Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

• Maintaining computer networks including mainframes, VPNs, routers and other physical hardware
• Creating firewalls and updating virus protection software and data security systems to keep data and communications protected
• Possess robust analytical and problem-solving abilities, with a talent for addressing technical and operational challenges
• Skilled in network operations and maintenance, enthusiastic about offering troubleshooting assistance.
• Preference for IT audit experience or certification in CISA/CISM, operational risk management, self-assessment of control, prior implementation of security solutions, and information security governance experience.
• Enterprise Data Network (administration, patching, upgrade and migration activities), Design, Preparing of HLD/LLD, Implementation Team leading, Service Level management, demand, incident, change management.
• Conduct a network audit to pinpoint any deficiencies and propose appropriate solutions. Assisting with RFP/RFI reply.
• Cisco/Aruba Networking and Wireless LAN.
• DDI, AAA/Cisco Identity Services Engine
• Python & Ansible for Automating Networks
• As Built, LLD, Testing & Acceptance Testing Documentation Skills
• ZScaler & Network Security
• Provide network WAN/LAN design, implementation, consulting, Cisco, Aruba, Juniper

Roles & Responsibilities

Responsibilities

• Assist of design, develop & customize automation concepts in line with customer requirements with effective technical solutions in customer site.

• Review and improve existing automation solutions.

• Support and troubleshooting automated production line.

• Prepare automation system document, drawing, procedure & work instruction.

• Prepare maintenance procedures to training & supervise maintenance team’s program & activities.

• Knowlege & experience in panel making

• Participate of workplace health and safety, abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives.

• Any other duties as and when assigned.

Requirement

• Degree in Mechanical / Mechatronics / Electrical / Electronic Engineering or equivalent

• Possess knowledge of industrial automation & engineering, PLC, CAD. Experience in automation design are advantages.

• Driving Licence with Class 3,2B are advantages

• Good interpersonal, communication and Microsoft skills

Only shortlisted candidate will be notify

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs

• Knowledge in source code management tools such as Git and GitHub, and experience with branching and merging strategies.
• Experience in Cloud computing platforms such as AWS, including EC2, S3, Lambda, Glue and RDS.
• Good understanding of infrastructure as code principles and experience with tools such as Terraform or Cloud Formation.
• Experience in Level 2 issue troubleshooting.
• Strong understanding of DevOps principles and experience with CI/CD pipelines.
• Knowledge in test environment setup and experience with tools such as Selenium or Postman.
• Knowledge in databases and SQL.
• Knowledge in networking protocols and services, such as DHCP, DNS, Firewalls etc.
• Experience in JVM development environment.
• Familiarity with containerization technologies such as Docker and Kubernetes.

Design & Drafting: Assist in creating and refining electrical drawings, ensuring they align with project specifications and industry standards.

Calculations: Perform basic load calculations and other engineering analyses required for project development.

Material Management: Generate material take-offs to aid in accurate project planning and cost management.

Project Execution: Support the timely execution of deliverables by coordinating project schedules, resources, and deliverables.

Coordination & Support: Assist in the arrangement of equipment installation, testing, and commissioning activities, ensuring smooth project completion.

Problem-Solving: Collaborate with the manager to address client inquiries and provide effective solutions for electrical issues.

Stakeholder Communication: Maintain consistent communication with clients, vendors, contractors, and sub-contractors to ensure project alignment and success.

Client Relations: Build and nurture strong relationships with customers and clients to foster trust and satisfaction.

Personal Attributes:

• Detail-oriented with a proactive problem-solving attitude.
• Excellent team player with the ability to work independently when required.

Training & Development:

• Specialized training in PLC programming to enhance your skills and career trajectory.
• Opportunities for professional development and certifications.

Additional Perks: Comprehensive support for career growth within a supportive team environment

view more jobs: www.blueboxjobs.com

The detail plans as described above are as follows:

• Execution formation with the direction by COMPANY’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with COMPANY’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the COMPANY’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Candidates are expected to:-

• Participate in the general planning of maintenance and operations onboard vessel;
• Control the detailed implementation of the general plans in appropriate areas;
• Plan the activities of immediate subordinates and officers under his/her charge;
• Serve as a member of the Management Team onboard vessel;
• Implement safety policies and practices onboard vessels according to the QHSSE policies as defined;
• Perform the role of the Training Officer for any Engineer Cadets/Ratings;
• Deputise for the Chief Engineer when necessary; and
• Appraise the performance of immediate subordinates and Cadets and report to Chief Engineer.

The ideal candidate must:-

• Possess a Certificate of Competency (Marine Engineer Officer Class II); and
• Possess at least 3 years of experience as a Second Engineer Officer onboard a container vessel.

The ideal candidates will possess extensive knowledge of power plant systems and operations, along with strong communication skills to work with the project team. This role is crucial for ensuring that all plant engineering tasks are executed correctly.

Key Responsibilities:

• Supports the engineering team at site to ensure that all technical engineering deliverables are completed on time and on budget.
• Bridging all technical communication between site stakeholders and engineering team.
• To provide technical advice and resolve / troubleshoot technical issues at site.
• Site engineers collaborate with project managers, site supervisors, engineering team, and other stakeholders for coordination.

Desired Characteristics:

• Strong technology knowledge on electrical equipment and requirements to assist the site team - equipment listed below.
• Familiarity with Singapore standards for power plant (at least 30MW size) installation and commissioning, specifically for voltage ranges from 0.4kV to 66kV.
• Capability to address inquiries related to installation and commissioning matters, including technical clarification and documentation work.
• Strong communication skills. Ability to be the main liaison between multiple stakeholders.
• Prior experience in installation and commissioning in power plant projects
• Preferable experience with Singapore government projects

Working schedule: 8-6pm Mon to Sat, Sunday if needed.

Location: Tuas

Contract duration: 1 year

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

WHAT YOU WILL DO:

Cost Transformation and Energy Management

● Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.

● Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.

● Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program

● Support the computerized energy monitoring system for the site to drive efficiency and sustainability

● Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.

● Provide expertise in conducting energy audit, evaluating options and providing solutions

● Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation

● Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts

● Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

● Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate

● Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets

● Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

● Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology

● Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations

● Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site

● Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.

● Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

● Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan

● Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels

● Ensure projects are timely, on budget and completed in compliance to safety and quality

● Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

Technical Competencies

● Advance in Energy Conservation Technologies, Proven Energy Savings Program, Standards and Benchmarking.

● Advance in the practical application of theoretical engineering knowledge

● Advance in the development and monitoring of engineering budgets

● Advance in planning of engineering and non-engineering activities in support of role

● Advance in the principles and application of risk based decision

● Consistently applies and promote LSS, MPS and change management tools

SHE

● Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards

● Seek opportunities to improve company SHE standards and move company towards goal on injury free work place & better environment

cGMP Standards

● Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards

● Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions

● Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance

● Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Problem Solving

● Demonstrate creativity, maturity and foresight in providing solutions which are highly innovative, practical for implementation and may have strategic impact

● Lead cross-functional teams in the evaluation and resolution of complex problems with potential impact across business units and demonstrates ability to make rapid rational decisions under pressure

ACCOUNTABILITIES

● Undertakes activities to realize cost reduction, energy reduction or continuous improvement projects to be on time, on budget and to meet compliance requirements

● Effectively implements the Performance Management Process (PMP), ensures that objectives are developed, provides timely continuous feedback to direct reports, and appropriately rewards team members based on performance and demonstration of our leadership standards

● Implement effectively any tasks or projects as assigned by Supervisor as prioritized by business need.

WHAT YOU MUST HAVE

● Engineering Degree or equivalent

● Singapore Certified Energy Manager (preferable)

● Advance degree, such as Masters, would be a plus

● Work experience required with 5-20 years’ experience in engineering, manufacturing, consultancy or equivalent industry

● Demonstrate leadership behavior in alignment with our leadership standards

Functional Competencies

● Demonstrated project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.

● Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance and calibration.

● Demonstrated capability in vendor service contracts management.

● Demonstrated knowledge of our System Life Cycle Methodology.

● Understands maintenance programs and requirements (reliability-centered, preventative, predictive).

● Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

● Demonstrated capability in the application of appropriate trouble-shooting and problem solving techniques.

● Effective communication skills, ability to lead cross-functional teams.

● Performance planning: objectives setting, metrics, action plan, reviews and performance management.

● Understands the site value stream and is customer focused.

Provide technical expertise, improvement recommendations and guidance in support of the manufacturing process. Work to improve the performance and efficiency of existing machine. Plan projects or subtasks that may be tracked and presented.

Responsibilities :

• Gather, analyse and summaries production process data for their use in valuing and prioritising process continuous improvement opportunities; utilise continuous improvement methodologies to lead, implement, and track improvements and to conduct check and adjust activities with the objective to reduce wastes while striving for efficiency and profitability.

• Work with cross-functional personnel to analyse and solve production flow issues stemming from sequence of work, balance of tasks, tooling/equipment constraints, and manpower allocation/training.

• Analyse and makes recommendations regarding production facility arrangements for improvements to production capacity, manufacturing flow, new model incorporation, and strategic work transitions.

• Identify, justify and implement new technology and manufacturing techniques to improve safety/ergonomics, reduce manufacturing cost (Labour, material, inventory, scrap) and improve product/process quality.

• To develop and implement an Energy program to prevent waste/reduce utility consumption.

• Support the needs of the plant by participating in all strategic initiatives.

• Control of Bill of Materials (BoM), CAD Models and Engineering Drawings.

• Participate in overseas project management team by the provision of engineering and technical expertise in the design and installation of new plant design and production lines. This includes the designing, installing/constructing and commission new production plant, monitoring development.

• Develop, implement and manages all maintenance procedures to ensure all engineering and maintenance goals are met.

• Ensure the Maintenance Department supports the needs of production and keeps all production equipment in proper working condition.

• Write reports and present progress at project meetings.

• Ensure plant equipment and processes are in compliance with all regulatory requirements including WSH, environmental, health and emissions.

• Responsible for completing technical work assignments with direction and Supervision.

• Responsible for reporting and taking any necessary action to prevent food safety and food quality problems from occurring.

• Responsible for following and enforcing procedures outlined in the HACCP & Quality Plan under the ISO & ISO Management Systems.

• Perform other related duties as assigned by superior.

Requirements :

· Diploma in any Engineering / Project Management related discipline.

- Fresh Graduates are welcome.

· Proactive team player and technically motivated to solve problems, innovate and deliver to internal and external customers.

· Possess strong written and communication skills.

Job Highlights:

• company transport provided
• Meal provided

Job Responsibilities

• Basic troubleshooting, installation, calibration, maintenance and repair on designated equipment.
• Completing Preventative Maintenance/Calibration reports
• Keeping up to date on administrative responsibilities such as maintaining customer service logs and internal service records in a timely manner.
• Maintaining daily communications with customers to ensure resolution and proper follow-up.
• Utilising the escalation process to resolve customer service delivery issues.
• Identifying and participating in sales opportunities such as new contracts or contract renewals
• Working as a member of the local team to provide efficient service delivery to all accounts within the assigned area.

Qualifications & Requirements

• Candidate should be Electrical /Electronic/ Mechanical trained with qualifications from polytechnics or relevant institutions.
• Possess some basic IT related experience.
• Possess minimum 2 years of relevant working experience/ Candidates with limited working experience will also be considered.
• Experience in troubleshooting and responding to customer concerns.
• Should have basic level of computer skills including MS Word, PowerPoint, Excel and Outlook
• Candidates are required to perform outdoor servicing of equipment and work in warm/humid environment.

The Project Engineer for the project will be responsible for managing and overseeing the technical aspects of the offshore substation engineering, procurement, construction, transport & installation, and commissioning processes. This role involves ensuring that all engineering activities are conducted in accordance with project specifications, timelines, budgets, and quality standards. The Project Engineer will work closely with the engineering, construction, and commissioning teams to ensure the successful execution of the offshore substation project.

DUTIES & RESPONSIBILITIES

Engineering and Technical Support:

• Coordinate and oversee the detailed design activities for the offshore substation, ensuring compliance with Employer Requirement, industry standards (e.g., IEC, DNV, ISO), and safety regulations.
• Support performing engineering calculations, simulations, and assessments to verify the integrity of designs and ensure that all technical requirements (e.g., electrical, mechanical, structural) are met.
• Provide technical support to the project team during design, procurement, construction, and commissioning phases. Address any technical queries and assist with resolving complex engineering challenges.
• Participate in design reviews and workshops with the engineering team, ensuring that designs are optimized for cost, schedule, and performance.

Procurement, Supplier & Subcontractor Management:

• Work closely with the procurement team to define technical specifications for equipment, materials, and systems required for the offshore substation. Ensure that procurement activities align with engineering requirements.
• Liaise with suppliers and subcontractors to ensure the timely delivery of materials and equipment. Participate in supplier selection and manage technical discussions and clarifications.
• Oversee the performance of subcontractors and suppliers during the entire project schedule, ensuring compliance with technical requirements and specifications.

Construction and Transport & Installation Oversight:

• Coordinate with the construction team to ensure that the offshore substation is constructed according to design specifications. Supervise the installation of electrical, mechanical, and structural components of the substation.
• Monitor the quality of materials, workmanship, and installations. Ensure all activities adhere to the project’s quality management system (QMS) and relevant standards.
• Liaise with the offshore construction team to provide technical support, ensuring that engineering issues are promptly addressed and resolved. Act as the primary focal point for any technical challenges during construction and T&I stage.
• Track the progress of construction and transport & installation activities, ensuring they are completed on schedule. Provide regular updates to the Project Manager regarding the status of engineering tasks.

Safety, Health, and Environmental (SHE) Compliance:

• Ensure that all engineering and construction activities adhere to the project's health, safety, and environmental (HSE) policies and regulations. Support in conducting safety audits and risk assessments where applicable.
• Identify potential risks associated with engineering tasks, including offshore conditions, and work with the project team to develop strategies to mitigate these risks.

Commissioning & Handover:

• Provide technical support during the post-commissioning phase to address any issues that arise and ensure the substation operates efficiently.
• Collaborate with the commissioning team to ensure the offshore substation is tested and commissioned successfully. Provide technical support during system tests, including electrical, mechanical, and communication systems.
• Ensure all technical documentation, including design calculations, test reports, commissioning results, and as-built drawings, is accurately recorded and handed over to the Employer.

Reporting & Documentation:

• Prepare and deliver regular technical reports to the Project Manager and senior management, outlining the status of engineering tasks, challenges, and any risks, being incorporated in Project Report.
• Maintain accurate and up-to-date technical documentation, including design changes, specifications, test results, and approvals. Ensure all documents are in compliance with project management processes and procedures.

Coordination & Communication:

• Work closely with other disciplines (electrical, mechanical, structural, etc.) to ensure that the design, construction, and commissioning of the projects are well integrated.
• Maintain clear communication with Employer, subcontractors, suppliers, and other stakeholders. Liaise with project team in providing technical explanations and in resolving any issues that arise during the project lifecycle.

REQUIREMENTS

Education

• Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field. A Master’s degree is a plus.

Experience

• Minimum 5-8 years of experience in project engineering, with at least 3 years in offshore energy projects (e.g., offshore substations, offshore wind, or oil & gas industry).
• Experience with electrical, mechanical, and civil engineering aspects of offshore substations is highly desirable.
• Experience in project coordination and the ability to manage technical tasks within a multidisciplinary team.

Qualifications

• Strong understanding of offshore substation systems, including electrical distribution, power transformers, switchgear, protection systems, and control systems.
• Familiarity with the design, procurement, construction, and commissioning phases of offshore substation projects.
• Knowledge of relevant codes and standards (e.g., IEC, DNV, ISO, and offshore standards).
• Strong verbal and written communication skills, with the ability to clearly present complex technical information to non-technical stakeholders.
• Ability to work effectively with Employer, subcontractors, and team members, both onshore and offshore.
• Strong analytical and problem-solving skills with the ability to resolve technical issues on the spot and think critically during challenging situations.
• Knowledge of offshore health, safety, and environmental regulations and the ability to implement safety measures during engineering and construction activities.
• Offshore safety certifications (e.g., BOSIET) are a plus.
• Familiarity with engineering design software (e.g., AutoCAD, VISIO, etc.) is desirable.

Roles & Responsibilities

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinate between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering or equivalent
• Experience: Prior 3 years experience in building projects

Key Responsibilities:

• Design, implement, and maintain CDN architectures to optimize content delivery.
• Configure and manage CDN services to enhance performance.
• Monitor CDN performance metrics and analyze traffic patterns to identify areas for improvement.
• Provide effective troubleshooting solutions for technical issues encountered during content delivery.
• Collaborate with development, DevOps, and network operations teams to resolve complex technical problems.
• Collect and organize customer feedback to provide insights and improvement suggestions to the product and development teams.
• Maintain strong customer relationship by providing after-sales technical support through phone, email, and online chat.
• Implement security measures to protect content delivery from threats such as DDoS attacks.

Qualifications

• Education: Bachelor's degree in Computer Science, Information Technology, or a related field.
• Experience: Proven experience working with CDNs (e.g. Akamai, Cloudflare, AWS CloudFront).
• Networking Knowledge: Deep understanding of networking technologies and protocols including TCP/IP, DNS, DHCP, routing, and switching; familiarity with network topologies.
• Programming Skills: Proficiency in programming languages such as C, Java, Python, JavaScript, and HTML for developing and optimizing CDN services; experience in scripting for automation using languages like Python.
• Language Skills: Fluency in English and Mandarin is required for effective communications with clients.
• Soft Skills: Excellent problem-solving skills, attention to details, strong communication skills for effective collaboration with cross-functinal teams, and the ability to work independently as well as in a group setting.

Work Environment:

This position requires shift work with the following schedules:

• AM Shift: 7.30 AM to 3.30 PM
• PM Shift: 3.15 PM to 11.30 PM
• Night Shift: 11.15 PM to 7.30 AM

*Shift allowances will be provided.*

Employee Welfare:

We offer competitive employee welfare benefits that include:

• Medical and dental benefits
• Annuage Wage Supplement (AWS)
• Performance Bonus (Subject to company discretion)

Responsibilities:
* Design, implement, and maintain robust CI/CD pipelines for efficient software delivery.
* Collaborate with development, testing, and operations teams to automate build, deployment, and testing processes.
* Configure and integrate various tools and technologies to support automation and streamline the CI/CD pipeline.
* Develop automated test scripts and frameworks for functional, regression, and performance testing.
* Execute automated tests and analyze results to identify defects and areas for improvement.
* Monitor CI/CD pipeline performance and reliability, troubleshooting issues as needed.
* Continuously optimize and enhance the CI/CD pipeline for improved efficiency, scalability, and reliability.
* Work closely with cross-functional teams to ensure alignment with project requirements and timelines.
* Provide technical guidance and support to team members on automation testing and CI/CD best practices.
* Stay updated on emerging technologies, tools, and trends in automation testing and CI/CD DevOps practices.

Requirements:
* Bachelor’s degree in computer science, Engineering, or related field.
* Proven experience (Minimum 3 years) in building and maintaining CI/CD pipelines.
* Strong proficiency in CI/CD tools such as Jenkins, GitLab CI.
* Proficiency in scripting languages such as Python, Shell, or Groovy for automation tasks.
* Experience with containerization technologies like Docker and orchestration tools like Kubernetes.
* Hands-on experience with configuration management tools such as Ansible, Puppet, or Chef.
* Solid understanding of software testing concepts and methodologies.
* Experience in developing and executing automated test scripts using tools like Selenium, or JMeter.
* Familiarity with version control systems (e.g., Git) and code branching strategies.
* Strong problem-solving skills and attention to detail.
* Excellent communication and collaboration abilities.
* Proven ability to work effectively in a fast-paced, dynamic environment.
Preferred Qualifications:
* Certification in DevOps or Automation Testing.
* Experience with cloud platforms like AWS, Azure, or Google Cloud Platform.
* Knowledge of infrastructure as code (IaC) principles and tools such as Terraform or CloudFormation.
* Familiarity with Agile/Scrum methodologies.

Job description:

· Commissioning, Maintenance, Repair & Troubleshooting of marine electrical & mechanical equipment onboard vessels and in company premisses/workshop ( i.e. Burners, Boilers, Scrubbers, EGE, EBG, GCU and supporting systems).

· Ability and willingness to travel on short notice onboard vessels in region, but occasionally also globally.

· Employees must have ready valid travel documentation, passports, visas, seaman book and vaccinations as required to travel.

· This is full time position, and we welcome experienced candidates of all ages.

· Ensure that the work is executed according to the company’s Quality, Health, Safety and Environment guidelines and customer site procedures and report unsafe practices and incidents.

· Write Service Certificates (time sheets) on site and get them signed by customer.

· Write Service Reports with full details of job done, warn customer on possible safety issues, spare parts required/suggested and giving suggestions & recommendation of future services.

· Proactive recommendation of required/suggested spare parts to Customers.

· Communicate sales opportunities to Service Managers.

· Provide onsite and remote technical support to clients.

Required skills:

· Preferred experience with Boiler & Burners systems, Scrubbers, but it is not mandatory.

· Troubleshooting skills in electrical, electronic & mechanical systems.

· Basic programming skills of PLC (Programmable Logic Controllers).

· Basic parametrisation knowledge of industrial & marine controllers.

· Experience in automation, control and instrumentation devices, pumps, electrical motors, frequency converters, actuators, positioners, …

· Proficient skills in MS Office.

· Fluent written and spoken English.

· Cross cultural awareness.

· Structural and systematic approach when executing tasks.

· Attitude to provide high quality of work results.

· Good communication skills.

· Team player mindset with attitude to share knowledge and experience with Your colleagues.

· Customer oriented approach with effectively prioritizing and executing tasks with clear customer communication with no prestige attitude.