Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide raining and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

• Site Supervision:Oversee on-site construction activities to ensure progress matches project schedules.
  Monitor subcontractor work and ensure quality compliance.
  
• Technical and Design Implementation:Interpret and implement construction drawings and plans.
  Assist with layout, leveling, and surveying activities on-site.
  
• Project Coordination:Work closely with project managers, architects, and subcontractors.
  Ensure materials and resources are available for smooth execution.
  
• Quality Assurance:Conduct quality checks and inspections to ensure work meets design and safety specifications.
  Address technical issues and resolve problems promptly.
  
• Health and Safety Compliance:Enforce site safety regulations and report hazards or risks.
  Ensure all work complies with local construction and safety laws.
  

· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic

Job Requirements:

Education:

• Bachelor’s degree in Civil Engineering, Construction Management, or related field.

Experience:

• Minimum 3–5 years of relevant experience in construction project management in Singapore.
• Hands-on experience with local construction projects and regulatory requirements.

Skills:

• Proficiency in project management tools (e.g., MS Project, Primavera) and CAD software.
• Strong understanding of construction methods, materials, and local building regulations.
• Excellent leadership, problem-solving, and time-management abilities.
• Effective communication skills to liaise with stakeholders at all levels.

Key Responsibilities:

• Plan and execute construction projects, including budgeting, scheduling, and resource management.
• Collaborate with architects, contractors, and consultants to ensure project alignment with design specifications.
• Supervise on-site activities to ensure adherence to safety, quality, and compliance standards.
• Resolve technical and operational challenges during project execution.
• Prepare and present progress reports to stakeholders.
• Ensure compliance with Singapore's building codes, safety regulations, and environmental standards.

Your responsibilities will include, but are not limited to

• Manage network tool utilizations strategies and benchmark performance to optimize the company’s deployed capital
• Manage and communicate improvement and implementation plan to all relevant levels and functions in Manufacturing
• Optimize capacity of install equipment and lead sites and tool level optimization studies for throughput enhancement
• Collaborate with partners to understand future tool and process roadmaps. Able to assess network capacity impacts of process changes
• Improve financial analyses before capital equipment are purchased through automating metrics optimizations, process flexibility, capacity sharing and equipment repurpose
• Attention to detail and ability to work in situations where changes is fluid
• Ability to spot, question and highlight differences to drive resolutions with relevant stakeholders

Requirements :

• Bachelors’ Degree in Engineering, Computer Science, or a Business-related or quantitative field (Finance, Economics or similar discipline). MBA or Master’s degree is a plus
• Experience turning complex and ambiguous problem statements into structured solution while working in a highly multi-functional environment
• Experience operating independently while maintaining a high degree of organization, control and change management
• Experience analyzing and interpreting data, drawing conclusions, defining recommended actions, and reporting results cross diverse technical and non-technical groups
• Experience working in teams, establishing and maintaining multi-functional relationships
• Experience in a combination of capacity analysis, business analysis or process analysis is advantageous

Work Location

• F16 Taichung, Taiwan
• F15, Hiroshima, Japan
• F10A, Singapore

Assisting the Support Engineer or Software Engineer in problem resolution beyond the capability of the 1st Level Support Staff.

• Performing system recovery if needed.

• Escalating unsolvable problems to the 3rd Level Support Staff and reports the escalation to superior.

• Ensuring that the System runs according to contractual specifications after problem resolution.

• Providing advice on system / database performance monitoring and tuning.

• Ensuring deployments of approved patches/releases are implemented accordingly to Change Request.

• Complete all Service Requested accordingly to SLA timeframe.

• Assisting the Customer in the verification, isolation and/or provision of a temporary work-around for the problem logged beyond 2nd Level Support Staff capability.

• Escalating unsolvable system problems and service request to the OEM/Vendor for technical support.

• Coordinating system development tasks to include design, integration and formal testing on the Change Request.

• Overseeing all transitions into production on the Change Request.

• Developing and complete actions in system specifications, technical and logistical requirements and other disciplines on the Change Request.

• Creating and maintain programmatic and technical documentation to insure efficient planning and execution on the Change Request.

• Managing and document system configurations on the Change Request.

• Perform troubleshooting and resolve incident based on SLA.

• Generating the relevant administrative records and reports.

The intern will work in the Production department of Keystone Cable factory. He will report to the Plant Manager (mentor) and work alongside engineers / technicians to identify opportunities for factory operations efficiency and productivity improvement.

Expected tasks / responsibilities

1. Job shadow / On-job training, OJT of Production Engineer to understand cable manufacturing process.
2. Problem understanding of current methods of manual production data collection with the intent of improving the process flow and to digitize where possible.
3. Data acquisition of shop floor data to set baseline targets for production improvement
4. Research and testing of hypothesis on production parameters we want to improve
5. Project management of one or two projects to improve factory productivity / efficiency using existing or acquired skillsets.

Learning outcomes and objectives

1. To allow intern to gain a good understanding of the work and responsibilities of a production engineer in a factory.
2. To project manage one or two projects that tackle factory productivity and efficiency problem statements.
3. To apply and extend intern’s skillsets on shop floor data collection and analysis with the objective of improving existing factory systems.
4. To allow company and intern to assess compatibility for potential collaboration opportunities in the future.

Requirements

Personal traits requirements: Respect for individual, Team player, Good communication skills, Willing to accept new challenges and learn.

Technical requirements: Industrial control and automation, Power systems, PLC systems, Basic programming skills will be a plus: Python, SQL database. MS Office proficiency

*Kindly indicate the period you are able to commit to the internship in resume

*Only available for internship period beyond August

Job Overview:

The Assistant Project Engineer will report directly to the Project Manager and manage ACMV (Air-Conditioning and Mechanical Ventilation) works within the built environment. The role involves ensuring that all project activities comply with engineering and contractual requirements. This position requires collaboration with the design department to meet engineering and safety standards, while overseeing contracts, costs, schedules, and overall project completion.

Key Responsibilities:

• Assist in managing the overall project from concept to completion, including support in planning, scheduling, budgeting, and coordinating with stakeholders, while following the Project Quality Plan, Safety Management Plan, and Building Execution Plan.
• Support the development and maintenance of the BIM model, ensuring it is accurate and up-to-date.
• Assist in the preparation and management of project documentation, including drawings, specifications, and reports.
• Collaborate with the client to help meet their requirements under the guidance of the Project Engineer
• Assist in verifying changes to project scope, schedule, or budget, ensuring compliance.
• Help in resolving technical or contractual issues that arise during the project, with the support of the senior team.
• Provide assistance in managing the construction process to ensure it progresses on time, within budget, and meets quality standards.
• Support monitoring the performance of contractors, ensuring they meet their obligations.
• Coordinate with various consultants and contractors, under the guidance of the Project Engineer.
• Assist in the handover process of the project to the client.
• Comply with all relevant Singapore regulations and standards under the supervision of senior project staff.
• Promote safety management activities and assist in compliance inspections.
• Assist in obtaining necessary permits and approvals.
• Support sustainability efforts and ensure the project adheres to environmental standards.
• Help minimize disruption to the public during construction by coordinating with authorities.

Requirements:

• Diploma or Degree in Mechanical Engineering, Building Services, Project Management, or a related field. ACMV project experience is preferred.
• Bizsafe Level 2 safety certification or higher preferred.
• A minimum of 1 year of experience in a related field is preferred, though fresh graduates are welcome to apply.
• Strong independence and leadership skills in a team environment.
• Knowledge of BIM are advantageous.

Advantages & Benefits:

• 5-day work week.
• Training provided for skillset conversion to BIM management, with fast progression upon BIM accreditation.
• Career development focused on progression and growth.
• AWS included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects.

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies.

· To prepare final design configurations, layouts, solid models and production/engineering data.

· To assist in preparation of machine documentation, specifications, manual.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, resourceful and organized.

Job Requirements:

· Degree/Diploma or relevant in Mechanical Engineering.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable.

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Qualified candidates please send your application with full resume stating current and expected salary.

DESCRIPTION

- Sizing, calculation, design layour, quantities and estimation based on drawings

- Provide technical support to sales team

- Prepare quote and technical proposal

- Attend meetings with consultants, engineers and clients

- On site troubleshooting/servicing work, resolving technical issues including system testing and commissioning

- Any adhoc tasks assigned by the management from time to time

REQUIREMENTS

- Knowledge in electrical and electronics

- Competent in AutoCAD

- Knowledge of BIM

Job Title: Project/Site Engineer - Fire Protection, Plumbing & Sanitary

Job Description:

1. Assist in site supervision of Fire Protection, Plumbing, and Sanitary systems.
2. Coordinate project planning, documentation, and execution of works on-site.
3. Monitor project progress, including manpower, materials planning, and ordering.
4. Liaise with internal departments and external stakeholders, including clients and subcontractors.
5. Oversee submission coordination and prepare necessary progress reports.
6. Conduct site inspections to ensure quality control and compliance with project requirements.
7. Attend site meetings and resolve technical/site issues as needed.
8. Report to the Construction Manager (CM) or Project Manager (PM).

Requirements:

1. Diploma or Degree in Mechanical Engineering or related field.
2. 1-5 years of experience in construction projects.
3. Strong communication skills and ability to interact across all levels.
4. Knowledge of project management processes across all project stages.
5. Experience in wafer fabs or pharmaceutical projects is an advantage.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

This position focuses on strategy and modeling creation, improving global standardizations, enable sustainability through automation, synchronizing the processes and scaling the solutions to transform the inline interdiction and operation system automation for RAM Quality and Operation Engineering sections.

Responsibilities:

• Establish and improve BKM (Best Known Method) for RAM quality defense line, sampling methodology, sampling systems and operation efficiency.
• Improve quality and yield performance by reducing defect OOC% variation.
• Keen to learn new skills, initiate proactive and continuous improvement projects, in areas across the Front-End including manufacturing methods and processes, quality, software systems, cycle time, key tool metrics (utilization, and performance efficiency), maintenance and routine tasks, and other manufacturing support operation.
• Establish metrics that can efficiently audit adoption rate and compliance to business process, BKM and strategy and perform audits.
• Perform quality deviation investigations, fab metrics benchmarking analysis and find opportunity for improvements.
• Lead and facilitate discussion to drive network alignment on strategy business process and roadmap to achieve area objectives and deliver to timelines/commitments. Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.
• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.
• Provide tactical support and coordination for the Fabs for issues of People, Safety, Yield, Quality, Cost, and Cycle Time when required.

Qualifications & Skills:

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management and present strategy and updates to network members and leaders.
• Proficient in project management with good resource planning, status monitoring and deliver timely results.
• Promote worldwide sharing and transfer of area-specific knowledge.
• Proficiency, experience, and knowledge relating to product and test wafer capacity modeling, wafer at risk modeling, Failure Mode Effect Analysis (FMEA) concept and system, defect analysis tools, sampling strategy and systems, Statistical Process Control (SPC) tools, Cycle Time Management, tableau creation, SQL and Programming language and Organizational Change have advantage.

Education and Experience:

• Masters/bachelor’s in engineering
• Relevant working experiences in RDA and/or Metrology
• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals.

Maximizes yield by working on tools, the process, or wafer fabrication recipes. Troubleshoots wafer fabrication problems and performs root cause analysis. Works with other process areas to understand and control process deviations. Long-term investigation of defect issues may require extensive work with shift engineering and other functional areas. Evaluates products to ensure they meet the required design and performance specifications. Conducts research to assess process adjustment requirements and recommends process improvements or equipment changes needed to efficiently manufacture new product or part types.

Job Responsibilities:

• Solicits new customer/products, existing customer’s recommendation and other sources which provide regular updates on construction projects
• Review M&E (Electrical) tender documents and drawing
• Material takes off, prepare bill of quantities and cost estimation
• Prepare technical data quotation and proposal to clients
• Attend to site visits/offices for contract negotiation
• Collects and collates background and ongoing project information of new customers to better facilitate credit approval
• Analyzes reports which helps to increases sales revenue and achieve profitability
• Other ad-hoc activities assigned by superior

Education Required:

• Diploma/Degree in Quantity Surveying, Electrical Engineering

Experience Required:

• Min 2 years in Electrical sector
• Working experience as Electrical QS is preferred
• Proficiency in MS Office & Auto CAD

Competencies and Skills Required:

• Communication skills – Good listening skill, English speaking and in writing.
• Possess good negotiating skills, analytical and research skills
• Good knowledge of materials and construction at site;
• Possess good inter-personnel skill to interact with all levels
• Pay attention to drawing details & requirements.
• Tactfulness with self-confidence.

Your primary responsibilities will be:

• Risk assessment of NAND cell reliability, identification of the process/trim/test strategy to bridge the gaps for JEDEC and internal product qualification.
• Design experiments to identify and segment the limiting reliability mechanisms impacting NAND quality.
• Design high volume electrical experiments (both wafer level and component level) and perform statistical data analysis to validate process/trims solutions required to close reliability gaps.
• Update management and provide continuous feedback to process development and product engineers on the NAND reliability status and roadmap to bridge gaps.
• Contribute to develop forward looking technology path finding for next NAND generation, including reliability risk assessment and product capability projections, identify innovative design and product features required to meet quality specification.

Required skills:

• Proven experience with NAND device structures, operations and algorithms
• Knowledge and understanding of electrical properties of semiconductor and insulator materials, semiconductor device physics and solid-state physics
• In-depth understanding of physics-based modeling of non-volatile memory and semiconductor devices failure mechanisms, reliability analysis
• Knowledge and understanding of statistical analysis and numerical computing software (Matlab, Octave, JMP)
• Knowledge and ability of scripting languages (C, C++, Matlab, Perl)
• Familiar with Big Data and database queries
• Knowledge of JEDEC standards

Responsibilities:

• Prepare Product / Architectural / Mechanical drawings with AutoCAD / Solidworks.
• Work within stated procedures to ensure that design records/controls are maintained.
• Provide product technical support to customers / suppliers.
• Ensure Supplier’s Quality meet our Quality Standard.
• To Initiate / propose / participate in Quality Improvement.
• Take part in new product development.
• Other ad-hoc job assigned by the supervisor.

Requirements:

• Min Degree in Mechanical/Engineering or equivalent.
• Good understanding of Precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Ironmongery industry.
• Minimum 3 to 4 years experience in mechanical field or Ironmongery industry.
• Required language(s): English, Mandarin (to liaise with 90% Mandarin speaking customers - majority, and suppliers in regard to technical support).
• Well verse in Solidworks & AutoCAD Software.
• Responsible, mature, independent with a positive attitude and willingness to learn.

Additional Information

• Office Location: 141 Woodlands Industrial Park E 5, Woodland E-Terrace Singapore 757507.
• Working Hours: Mondays to Fridays (8:30am to 5:30pm), Alternative Saturdays (8:30am to 1:30pm)

For immediate consideration, please indicate the following information in your resume:

(a) Current and expected salary

(b) Earliest available date to commence work

Please note that qualified applicants who are immediately available will be given priority, and we regret that only shortlisted applicants will be notified.

As a Senior- level Device Engineer in Micron's Front End Central Process Integration Engineering (cPIE) team, you will co-work with the global Micron network on improving Device performance to meet product yield and quality requirements, through optimizing process steps, reducing device variability, optimizing design layout or test specs, and standardizing device engineering business process and working methodology. The primary focus could be either DRAM or NAND flash memory when needed.

Requirements:

• Bachelor's degree with a minimum 5 years of relevant working experience is required. Master's or Ph.D. degree in Physics or Engineering areas is preferred.
• Working experience in fab process or process integration or test engineering. Direct experience in CMOS or NAND/DRAM memory device engineering is preferable.
• Require proven knowledge in semiconductor physics and understanding of transistor operations, scaling limitations and reliability, basic knowledge of CMOS circuits and characterization methods. Experience in advance transistor architectures such as High-K metal gate or FinFET or GAA is preferred.
• Deep understanding of at least one semiconductor fabrication process area, including tool sets, process mechanism, tuning knobs, etc.
• Excellent data analysis skills using at least one software (JMP, SPOTFIRE, etc).
• Strong task ownership, self-motivated to work with other team members to make progress collaboratively.
• Open-minded attitude to learn new skills and could adapt to new working environment swiftly.
• Good communication skills. Proficient in English (speaking and written). Working-level communication capability in Mandarin Chinese OR Japanese is preferred.
• Good digital literacy with MS office. Programming capability such as Python is a plus.
• Occasional domestic and international business travel is required.

Job responsibility:

cPIE Device Engineer, responsible for product yield and quality improvement, by working collaboratively with Micron global network, to improve device performance, standardize business procedure and working methodology.

Your primary responsibilities will be:

• Risk assessment of NAND cell reliability, identification of the process/trim/test strategy to bridge the gaps for JEDEC and internal product qualification.
• Design experiments to identify and segment the limiting reliability mechanisms impacting NAND quality.
• Design high volume electrical experiments (both wafer level and component level) and perform statistical data analysis to validate process/trims solutions required to close reliability gaps.
• Update management and provide continuous feedback to process development and product engineers on the NAND reliability status and roadmap to bridge gaps.
• Contribute to develop forward looking technology path finding for next NAND generation, including reliability risk assessment and product capability projections, identify innovative design and product features required to meet quality specification.

Required skills:

• Proven experience with NAND device structures, operations and algorithms
• Knowledge and understanding of electrical properties of semiconductor and insulator materials, semiconductor device physics and solid-state physics
• In-depth understanding of physics-based modeling of non-volatile memory and semiconductor devices failure mechanisms, reliability analysis
• Knowledge and understanding of statistical analysis and numerical computing software (Matlab, Octave, JMP)
• Knowledge and ability of scripting languages (C, C++, Matlab, Perl)
• Familiar with Big Data and database queries
• Knowledge of JEDEC standards

Working location:

• 1, North Coast Drive, Singapore 757432

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

FE Central Product Integration Engineering (CPIE) HPM PI Engineer

As FE CPIE HPM (High Performance Memory) PI Engineer at Micron Technology, Inc., you will be responsible for working with global Micron network to drive HPM Product yield, quality improvement, new product introduction (NPI) through technical expertise, business process management and project execution.

Responsibilities and Tasks

• Promote worldwide synergy for improved benchmark performance and efficiency gains through global project management and execution, network BKM leveraging and enhancement, and business process creation and re-engineering.
• Active engagement with PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow in a timely manner to achieve BIC yield performance.
• Maintain and enhance domain knowledge and technical expertise, explore innovation opportunities with strategic thinking and systematic approach.
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Fab, TD, Product Engineering, GQ. Communicate and respond to issues in a timely manner. Help drive to fix the issue where necessary.
• Demonstrate ability to give effective presentations to both small and large groups on project updates and new initiative proposals.
• Periodically follow up with manager to ensure all type of goals are met and get assistance to remove obstacles.
• Travel to Micron Fab locations as necessary for face-to-face collaboration for program requirements.

Requirements

• Background in electrical engineering, materials science, transistor physics and semiconductor process knowledge.
• Experience with Semiconductor Device Physics, DRAM operations, wafer fabrication process flows, parametric/electrical test, and probe yield will be an added benefit to this position.
• Good data analysis, troubleshoot, problem solving, reporting and presentation skills.
• Good multi-tasking, verbal, and written communication skills.
• Strong interpersonal skills and customer/co-worker relationships. Successfully demonstrated teamwork skills with a strong focus on developing good team dynamics.
• Good organizational capabilities and ability to work effectively with minimal supervision.
• Intermediate to advanced PC skills including Microsoft Office.
• Ability to be flexible with job responsibilities and take the initiative to assume added responsibilities.
• Travel Required: Yes. Willing to travel as needed to support department goals
• Travel Frequency: 20-50%.

Education

• Bachelor’s degree and above in Electrical Engineering, Microelectronics, Physics, Chemistry, Materials Science or related field of study

Job Description

· Work closely with the Project Team on identifying the customer’s needs and expectations. Site Survey and measurement.

· Support the Project Team on administrative works such as handling customer enquiries, preparing tender documentation, technical and material specifications and daily project reports (photos etc).

· Arrange meetings and monitor progress of the project works to ensure the projects are is on schedule, within budget and completed with good quality.

· Prepare workers’ worksite schedule and logistics arrangement.

· Coordinate with key stakeholders such as contractors, customers, QE/PE to meet authorities requirements and obtain the permits required for project completion.

· Upon completion of project, ensure proper project handover and follow up on maintenance services.

Requirements

· This is a non-executive position with at least 3 years relevant work experience.

· Proactive, committed, and able to work in a fast-paced environment.

· Possess initiative and ability to work independently.

· Good team player with excellent interpersonal and communication skills.

· Class 3 driving license is required

· Job Types: Full-time, Permanent

We are seeking a passionate and innovative AWS Cloud Engineer to join our team. In this role, you will

be responsible for migrating on-premises applications to AWS infrastructure using Infrastructure as

Code (Terraform). You'll collaborate closely with application and data teams to ensure they have a solid,

scalable platform for deploying their solutions. If you thrive in a collaborative and supportive

environment and have a desire to continually learn while building cutting-edge cloud solutions, we want

to hear from you!

Key Responsibilities

Cloud Infrastructure & Operations:

1. Implement robust solutions on AWS using services like EC2, Lambda, VPC, S3, RDS, and

Document DB.

2. Manage infrastructure changes via IaC (Terraform), ensuring scalable environments with EC2,

ALB, NLB, EBS, and EFS.

3. Migrate workloads to AWS, ensuring seamless transitions.

4. Automate deployments and data resilience using Python, shell scripting, and AWS SSM

5. Implement monitoring, alerting, and security with CloudWatch, SNS, CloudFront, and WAF.

6. Automate deployments, data resilience, and system administration using Python, shell scripting,

Bash, and PowerShell.

7. Administer Linux and Windows environments, ensuring optimal performance and security.

8. Support incident management and participate in the on-call rotation.

Collaboration & Continuous Improvement:

1. Work with clients and internal teams to understand requirements and deliver customized AWS

solutions.

2. Collaborate on CI/CD pipelines with tools like GitHub, Terraform, Jenkins, and AWS services.

3. Maintain comprehensive documentation and stay updated with industry trends.

4. Collaborate in an agile environment to deliver high-quality work.

What we are looking for

Requirements:

· 5 to 10 years of experience with core AWS services, such as IAM, networking, security, and

operations.

· Experience with infrastructure-as-code tools, such as Terraform, and a clear understanding of

infrastructure pipeline concepts.

· Solid understanding and experience building systems using AWS compute services, such as

EC2, and serverless platforms like AWS Lambda.

· Proficiency in at least one programming language, such as Bash, Python with additional

expertise in Linux administration, Windows, and shell scripting.

· Strong understanding of both relational databases (e.g., PostgreSQL, MySQL) and NoSQL

databases (e.g., Document DB, Mongo DB).

· Experience implementing AWS database solutions, such as RDS, DynamoDB, or Aurora.

· Familiarity with network protocols and IP networking, along with experience in network

troubleshooting.

· Strong understanding of security best practices and a commitment to integrating them into daily

tasks and projects.

· Excellent problem-solving skills and the ability to work under pressure to troubleshoot and

resolve complex issues.

· Excellent communication skills, with excellent spoken and written English, for effective collaboration with cross-functional teams.

• Managing daily activities on the site.
• Attend site meeting, inspection, and monitoring of project progress with Main Con and Sub-cons.
• Ensure safe work procedures are implemented and carried out at all times to control risk.
• Perform structural analysis and design involving the preparation of calculations and structural design drawings in accordance to customers' specifications.
• Handle technical matters such as construction program, shop drawing & other submissions related to project.
• Able to read construction/shop drawings and understand detailing.

Full Job Description

Job Description

• Responsible for schedules and forecasts of project development.
• Work with relevant personnel to rectify any electrical/mechanical issues.
• Involve in design works and make sure specifications are in line with Authority’s code of practice and requirement.
• Liaise, coordinate, and monitor project progress to ensure that schedule is on time as planned.
• Prepare method statement, risk assessment, construction drawing, catalogue submission, safe work procedure and all other documents as requested by site.
• Plan, manage and coordinate all site matters, ensuring compliance to Project specifications, regulations and schedules.
• Technical specification review and recommend appropriate resolution.
• Directs, supervises and train technicians on engineering activities on site to meet all project requirements.
• Actively use the right tools to collect and observe data to ensure good coordination with team activities and communicates project status through technical reports.
• Co-ordinate and attend meetings with the Structural, Architectural, and other M&E contractor, sub-contractor, consultant, and client’s representatives to resolve project related problems and issues.
• Monitor project cost activity to take actions on cost deviation.
• Attend and conduct of Factory Testing and Site Testing and Commissioning of system
• Collect all necessary accurate data and share information pertaining to project issues, budgets, and schedules in project meetings.
• Prepare progress report and project handover report.
• Execute other assigned tasks as delegated by immediate superior.

Job Requirements

• Bachelor’s degree/ Diploma in Electrical or Mechanical Engineering or related discipline
• 3 years of working experience in construction industry
• Knowledge for Mechanical, Pumping System, ACMV, CCTV, Electrical or Control System or SCADA system will be an added advantage

Position Summary

Responsible for new product introduction Production Tooling Development, and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interfaces with design, process, test, reliability and manufacturing engineering to solve product issues and production problems. Develops and sustains process improvements to reduce production costs and increase yields.

Position Responsibilities:

• Support and drive production tooling development activities during NPI and sustaining phases.
• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Establish and maintain databases of Production Tooling.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Applies basic problem-solving techniques to define and resolve routine issues.
• Determines a course of action based on guidelines.
• Works on assignments of limited scope where answers can be readily obtained and problem solving requires following standard practices/procedures.
• Develops working relationships internally.
• Exchanges standard/basic information with colleagues, immediate supervisor, project leaders and other professionals in the team/group.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements (Experience/Education/Skills):

• Bachelor’s Degree or Masters in Mechanical or Electro-Mechanical Engineering

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 2 years of related experience with a Bachelor’s Degree; or 1 year and a Masters degree; or a PhD without experience; or equivalent work experience.
• 2+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in enclosure and chassis, structure, mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively work together as a team, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

Job Summary

· To develop Motion Control Solutions and algorithm for precision stages and robotic applications

· To develop R&D product development integration with motion control solutions

· Evaluation of R&D product performance

Job Responsibilities

1. Development of Motion Control with complex motion profile requirement for jerk reduction, vibration control

and force control

2. Development of R&D products in accordance to motion control solutions

3. Technical review of motion control products, including controllers, drivers, encoders and any peripherals

4. Provide technical support for product range including motion controllers, PLC, HMI, motor drives, DDT motors

and actuators, encoders and robotic arms.

5. Diverse a vibration monitoring system for predictive maintenance investigation

People Requirements

1. PhD/Degree / Diploma in any Mechatronics, Electrical, Electronic, Control or relevant Engineering discipline

2. Familiar and knowledgeable in Closed-loop Control systems and precision engineering

3. Knowledgeable in control systems principles and electrical fundamentals

4. Programing in C#

5. Self-motivated and good communication skills