As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above
Location: Fab10N
Closing Date: Until filled

As Facilities Utilities Engineer of Global Construction team, you will be an integral member of the Global Facilities Line Planning Group responsible for overseeing and managing the analytical duties related to facility utilities planning program, assisting in the planning and design of facilities construction and expansion projects. You will be responsible for managing Micron Facility utilities consumption assessment process, analyzing facility future needs and resource utilization analysis.

In this role, you manage utilities related projects, programs and will help to plan and prioritize resources needed to achieve results and assure accurate tracking of projects and programs to predict results and outcomes critical to success.

Responsibilities

• Collect, classify, evaluate utilities data and information used in supporting the facilities utilities consumption management and capital program.
• Create reports, charts, graphs and eventual monitoring system for Facilities Services.
• Define, manage and improve on Micron Tools Utility Matrix (TUM) Business Process.
• Drive network alignment among Micron sites in tools utility matrix (TUM) database.
• Drive network alignment across sites in Tools’ process independent utilities database and eventually moving towards alignment for Tools’ process dependent utilities database.
• Work closely with Teams from Global and Site Facilities, Global Planning, Facilities Transfer Team, CPEE & IEs to coordinate and drive facility utilities estimates for new layout, technode scenarios.
• report program status, wins, issues, and actions to program sponsor for broadcasting to global leadership team and stakeholders
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in wafer fab facilities systems is highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 3 years of Facility or Equipment tool Management experience in Semiconductor manufacturing environment
• Demonstrable experience in the Facility or Equipment tool utilities Management and/or other relevant industries is strongly preferred.

Keysight is the world's leading electronic measurement company, helping scientists and engineers address their toughest technical challenges with confidence through innovations in wireless, modular, and software solutions. Our employees leverage their insight and passion to deliver measurement solutions in wireless communications, aerospace and defense, and semiconductor markets with world-class platforms, software and consistent measurement science. This job will be part of the Communications Solutions Group, which is responsible for Keysight's portfolio in the Wireless Data Ecosystem, including wireless devices, operators, internet infrastructure, and Aerospace & Defense. Our software-centric solutions accelerate our customers' time to market and reduce their costs - giving them a competitive advantage in today's and tomorrow's technology waves.

Job Description

This position is for a full-time Software Engineer to join Keysight’s Quantum Engineering Solutions (QES) organization, which is responsible for producing world-leading solutions in quantum technologies, including quantum computing, quantum communications and quantum sensing. As a Solution Developer, you will be part of an R&D team and launch breakthrough software solutions to market. You will engage in every stage of our product development process, addressing intricate technical hurdles in a customer-centric setting, while implementing a novel method for calibrating physical qubits as an Automation Engineer.

Job Responsibilities

• Develop and implement automation tools for qubit calibration.
• Apply machine learning techniques to optimize calibration processes and improve qubit performance.
• Collaborate with quantum physicists and engineers to integrate calibration solutions into quantum hardware.
• Work independently as well as in teams to accomplish business objectives.

Job Qualifications

• Bachelor’s, Master’s, or PhD in Computer Science, Physics, Electrical Engineering, or a related field with 4-7 years job experience.
• Background in quantum computing and familiarity with qubit calibration methods.
• Strong proficiency in Python/ C++ programming.
• Solid understanding of graph theory and its applications.
• Experience with machine learning frameworks and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Knowledge of optimization techniques and high-performance computing (HPC) algorithms.
• Ability to work in a collaborative environment and to develop teamwork among individuals and over geographically disperse teams.
• High tolerance for ambiguity, results-oriented, meets timelines, handles pressure while working positively in a collaborative manner.
• Excellent written and verbal communication skills
• Willingness to learn proactively.

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

Requires a BS in Electrical or Computer Engineering and > 5 years of related experience

Micron Technology’s vision is to transform how the world uses information to enrich life and our commitment to people, innovation, tenacity, collaboration, and customer focus allows us to fulfill our mission to be a global leader in memory and storage solutions. This means conducting business with integrity, accountability, and professionalism while supporting our global community.  Micron’s teams of dreamers, visionaries, and scientists have redefined innovation—designing and building some of the world’s most advanced memory and semiconductor technologies.  Information Security Protection processes from within all business units with connectivity to corporate information security strategy is fundamental to protect Micron’s mission.

As the Frontend Manufacturing IP Security Manager/Principal Engineer, you will be responsible to help transform how the corporate Cyber and Information security strategies connect and integrate into all Micron technology and business teams.  You will work directly with local business unit information security teams to advocate and coordinate global security initiatives within the business areas, bring in real world security threat and awareness training campaigns, as well as leader or general population security awareness campaigns.  A primary attribute of the role is to be the conduit for feedback between Global Security and Micron’s business area teams.  Equally important is working with Frontend Manufacturing teams to internally assess and establish best practices within the business communities while bringing insights from local successes to a broader Micron community.  With business and information knowledge, you will be a partner with Global Security and business leadership to create and enable Micron’s overall security strategy.  In this, you will gain a broad perspective by working on a variety of information sources, control solutions, and dynamic business conditions across a global organization to analyze issues, make well-reasoned recommendations and solve problems to protect and enhance organizational value.

Responsibilities:
• Collaborate and conduit two-way interaction with Global Security Team and business areas supporting roadmaps, strategies, and requirements from both perspectives. Bridge security goals and commitments with articulated business needs driving towards a common set of goals and objectives

• Define clear goals and strategic initiatives to create, advocate, and present across-the-business security campaigns, awareness, and cultural messaging.  Assessments of security influence across Micron

• Understand and lead efforts to meet the requirements of internal and external customers. with Global Security Team, BISO and Data Protection Community to develop associated processes and automation requirements to enable.

• Coordinate with experts on various topics to present and provide education around their areas of expertise.  Create opportunities to increase security knowledge within the Data Security Community

• Coordinate leading and lagging metrics and to security problems, solutions, and business processes.  Partner to enable a business facing dashboard support security strategies and needed efforts

• Provide coordination for the Data Protection Community and BISOs to drive best practices and creative solutions to data security problems.  Drive to enable common guidance and goals (records and access management, unstructured data solutions, vendor and contractor access/data models)

• Partner with BISO representatives to drive best-known-methods within organizations supporting security culture and collaborate opportunity to expand

• Handle escalations and exception approvals for all Global Operations

Requirements :
• Ability to understand and effectively communicate vision and technical concepts in appropriate terminology at all levels of the organization

• Ability to balance security with end user productivity and operational impacts in a large organization to provide transparent, secure solutions

• Strong Agile development knowledge, build in increments and iterate

• Excellent organizational skills and the ability to see solutions to their conclusion

• Ability to be self-directed and a fast learner and ability to gain understanding of new solutions

• A sense of urgency, prioritization, and growth mindset

• Demonstrated ability to promote security practices and drive improvements into organization’s overall security framework

• Advantages with CISSP/CISM/CISA/ISO27001/PMP certification

Education & Experience:

• Bachelors/Masters degree in Engineering or Business Field, Computer Science, or Cyber security related field

• Equivalent experience in industry on Intellectual Property or Cyber Security

• Understanding of information technology general controls, process and structure

• Proven communication skills with multi-functional leaders

• Strong skills in decision-making, prioritization and problem solving

• Strong skills in Project management and organization change management

Identifies, analyzes, monitors and minimizes areas of risk that pertain to information technology. Coordinates closely with the disaster recovery and data security disciplines; all three disciplines (risk management, disaster recovery and data security) may be part of the same department.

JOB RESPONSIBILITIES:

• Assist the Project Manager in developing and managing project schedules.
• Coordinate with architects and contractors to ensure project success.
• Review project plans and electrical design, specifications, and contracts.
• Ensure compliance with building codes, safety regulations, and environmental requirements.
• Monitor project progress and make adjustment as necessary
• Communicate project status to Project Manager
• Manage project risks and identify opportunities for improvement
• Provide technical support to project team members
• Ensure quality control and quality assurance for all project deliverables
• Attend project meetings and facilitate communication among team members.
• Any other ad-hoc projects assigned from time to time

QUALIFICATION:

• Diploma or Degree in Electrical Engineering

WORKING EXPERIENCE:

• For Diploma holder, more than 3 years’ experience in handling project management.
• For Degree holder, 1-2 years similar experience
• Computer literacy in Microsoft Office
• Strong knowledge of construction materials, methods, and regulations
• Experience in managing and supervising construction teams
• Strong problem-solving and decision-making skills

Responsibilities:

• Performs all SQS work assignments in accordance with the standard work procedures, practices and specifications
• Review of Vendor Documents for Compliance to project requirements/ spectification and international standards
• Implements and adminsters the Quality Assurance Plan manifested by QA Supervisor for field and participates on a day to day basis in quality assurance activities.
• Review and approval of quality related specification, painting procedures, SAT and FAT procedures, NDT procedures, EIT related documents, pre com and commissioning documents
• Prepares and issue QAQC reports
• Organizes and perform audits and surveillance at a supplier's (or their sub suppliers) facility to verify compliance with qualification requirements
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor's Degree in Naval Architecture / Marine and Offshore / Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Well conversant with codes & standards like ASME, API, ANSI, AWS, IACS, ABS, NR etc

Our Addresses and Working Hours:

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description: We are a well-established no-code app development platform, seeking a highly skilled and adaptable Senior AI Integration Specialist to enhance our platform's capabilities through seamless integration of AI technologies. As a key member of our experienced team, you will be responsible for designing and implementing the integration of various AI functionalities to cater to our users' specific needs.

Responsibilities:

• Lead the integration of AI technologies into our no-code app development platform.
• Collaborate closely with the development team to identify integration requirements and implement efficient solutions.
• Customize AI functionalities to align with our platform's objectives and user interaction flows.
• Design and implement robust backend infrastructure to support AI functionalities' seamless performance within our platform.
• Conduct extensive testing to ensure the reliability and accuracy of integrated AI features.
• Continuously monitor and optimize AI performance to enhance the overall user experience.
• Stay updated with the latest advancements in AI technologies and apply relevant innovations to our platform.

Requirements:

• Bachelor's or Master's degree in Computer Science, Engineering, or a related field.
• Proven experience in integrating AI technologies into web-based or mobile platforms.
• Proficiency in programming languages like Python, Java, or JavaScript.
• Familiarity with cloud-based infrastructure and services.
• Strong problem-solving skills and adaptability to meet dynamic project requirements.
• Excellent communication and collaboration skills to work effectively within a team.

Nice-to-Have Skills:

• Experience with integrating language models like ChatGPT or other AI chatbots.
• Knowledge of dialogue systems, natural language generation, and user experience design.

If you are an experienced AI Integration Specialist with a track record of successfully integrating AI technologies into established platforms, we invite you to apply. Join our team and contribute to expanding our no-code app development platform with the power of AI, delivering even more value to our users.

Job Description

• Diagnose and resolve problems that occur in daily production lines/machines to minimise downtime and quality loss costs.
• Liaise with other departments to develop improvement plans to reduce quality loss costs and other cost savings activities.
• Develop process documentation and operating instructions for new/revised processes and/or products.
• Conduct the planned maintenance work for production machines & equipment to maintain optimum operating conditions.
• Manage Process Change control documents when implementing process and/or location changes on the assigned production process

Requirements

• Diploma or Degree in Mechanical / Mechatronic Engineering
• Min. 2 years experience in electronics connectors manufacturing environment
• Hands-on, enjoy solving problems
• A collaborative teammate
• A strong communicator and an active listener
• Strong analytical skill

Responsibilities:

• Design cooling and heating systems and follow through the deployment
• Drive thermal designs with numerical approaches, model based analysis
• Conduct experiments to validate designs
• Develop and optimize automation scripts for numerical analysis tools
• Support thermal management for electronics
• Involve in precision and mechatronics design work occasionally

Requirements:

• Min. Degree or higher in Mechanical Engineering / Physics or relevant disciplines
• Good understanding of thermal technologies including computational modeling and calculation
• Min. 1-2 years of working or research experience in thermal system design is preferred
• Knowledge in precision machine design, CFD or thermal modeling tools is a plus

JOB DESCRIPTION:

Department: MLCC production

Reports to: Manager

Functional relationships:

- MLCC process engineering in Japan factories

- MLCC related R&D in Japan

- MLCC process engineering in oversea affiliates: China and Philippines

POSITION PROFILE:
The Product Planning Engineer will drive improvements in the MLCC manufacturing process (post-process) and product quality, efficiency, and manufacturing costs through specialized knowledge of processes and products. This role includes providing technical training to local engineers focused on the post-processing aspects of MLCC manufacturing.

Key Duties & Responsibilities:

• Policy and Strategy Alignment: Collaborate with Japan HQ or other affiliate companies to align policies and strategies for project initiatives.
• Problem Solving Meetings:Initiate periodic meetings with Japan HQ or other affiliates to address issues within the division effectively.
• Quality Improvement:Enhance the quality of MLCC products by focusing on post-process improvements.
• Cost Reduction Initiatives: Propel efforts to reduce costs associated with MLCC products while maintaining quality standards.
• Efficiency Enhancements:Improve the efficiency of MLCC manufacturing post-process operations.
• Technology Transfer:Facilitate the transfer of new technologies from Japanese factories to Singapore factory.
• Bridge Between Teams: Serve as a liaison between Japanese factories and related R&D departments, ensuring timely access to necessary information for effective implementation into MES factory.
• Technology Grasping & Proposals: Stay abreast of new technologies; propose improvements in quality, cost, efficiency, and safety based on this knowledge.
• Technical Training Organization:Organize and deliver technical training sessions for local engineers focusing on best practices in post-process.

Ability/Competency required:

• Master degree in engineering field
• At least 2 years working experience in electronics manufacturing industry
• Deep & specialized technical knowledge in plating process and to be able to fully utilize it in actual job for improvement
• Fluent in Japanese and English language to liaise with Japan factories & R&D departments
• Logical thinking, analytical skill and good engineering sense
• Strong mind-set for change and improvement
• Proactive attitude and strong communication and interpersonal skills
• Networking ability with MLCC related functions

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Basic knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment
• Experience with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills (English speaking is must)
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines

Job Responsibilities:

Identify, select, and evaluate new equipment/ new technology to support current and future requirements

• Define, development and establish new equipment design/ capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new equipment capabilities/ solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Engage in active participation in Package Development Engineering activities
• Conducts equipment benchmarking to establish the equipment suppliers and platforms for future need
• Create decision matrix for equipment and material selection

Evaluate and qualify new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create and owner of purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional teams
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives
• Feedback loop for Continuous Improvement after mass volume production via collaborate with production and HVM team on existing production equipment enhancement through continuous improvement projects

Maintain a matrix of key equipment platform capability and constraints (Equipment Maturity Index, EMI & Tool of Records, TOR) on current and new equipment platform

• Driving EMI, a system to standardize equipment maturity expectations, metrics to communicate tool manufacturing readiness, analyze the requirements to advance tool maturity level
• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Equipment System Readiness, Enablement & Enhancement

• Conduct equipment characterization, identify and enable the critical equipment parameter monitoring system
• Working with PCS, IT & Automation team to enable tool control system such as FDC (fault detection & classification), E3 (enterprise equipment engineering), APC (advanced process control), tool alarm system, IOT, ECM (equipment constant management), R2R (run to run) and other equipment control system whichever applicable
• Equipment automation solution enablement for both system datamation (tool- micron host communication) and factory AMHS readiness and deployment from equipment perspective follow by working with IT & automation team to delivery full automation solution for production running support

Supplier Management & Engagement Program

• Working on several engagement forum from ERM (executive review meeting), TRM (technical review meeting), QBR (quarterly business review) to CIP review to strategize and ensure supplier understand and focus on identified priorities by business value ensuring focus on the greatest benefit
• Manage all the key and critical engagement activities between Micron and supplier to prioritize and enable quality and tool performance improvement
• Collaborate with supplier on technology and path finding focus, engineering improvement, manufacturing efficiency focus which focus on roadmap development/ solution and H2H partnership with competitive landscape strategies

Job Requirements/ Qualifications:

• PhD/Masters/Bachelor’s Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• Basic knowledge in semiconductor manufacturing assembly, wafer bumping packaging technologies & advanced packaging techniques
• Minimum 3 years’ experience in related semiconductor industry or related manufacturing environment
• Experience with technical knowledge on assembly and/or wafer bumping and/ or advanced packaging technology
• Understanding and/or experience in equipment automation solution e.g. GEM300, AMHS and IIOT solution for datamation such as APC, FDC, E3, PCS, SPC) is a plus
• Fast learner, with initiative and independence (min supervision), good team player, ability to integrate and cooperate with cross function teams and external vendors
• Strong communication (verbal & written) and presentation skills (English speaking is must)
• Understanding of business needs and customers’ requirement, able to participate in cross functional team environment
• Strong project management skills to ensure execution to timelines

As an Project Engineer, you will be responsible to execute project as planned cost and manage the order risk to satisfy customer and keep our promise.

Your Tasks as a Project Engineer will include the following:

• Review Project specification and requirement and highlighting the deviations between Sales technical offer and Project requirement to Contracts Manager/Engineer.

• Produce project design to meet project specification and technical offer, ensuring accurate information to meet project delivery.

• Liaise with internal/external customers and suppliers on technical matters

• Support Sales and Production on technical details.

• Responsible to arrange the factory acceptance test and Site acceptance test from customers

• Implement cost effective design and project management methods.

• Responsible for project dossier (document and drawing) preparation and submission.

Ideally you should have a degree or above, Electrical Engineering background preferred and other engineering degree may apply. Fresh graduates are welcome to apply.

You must have strong sense of responsibility, teamwork and customer oriented. You must be able to speak, read and write English.

Salary : $3,000 - $4,500

Job Description:

1. Lead a group of technicians to maintain all the facilities, building, and services systems (BMS, Electrical etc)
2. Perform Preventive maintenance and corrective maintenance program according to procedure for all electrical & BMS systems
3. Conduct troubleshooting and determine root cause for rectification works of all electrical & BMS systems
4. Liaising and check with contractors on all electrical & BMS preventive and corrective works
5. Comply with all Plant environment and safety guidelines
6. Ensure sufficient critical spares inventory for all electrical & BMS system
7. Ensure complete documentation of procedures and maintenance works
8. Standby duties as and when required for A&A or rectification works
9. Any other ad hoc works assign by HOD

Job Requirements:

1. At least 3 years of relevant experience in electrical engineering
2. Strong technical knowledge of electrical systems, project managament skills, problem-solving abilities and excellent communications skills

Only shortlisted candidates will be notified by the HR department.

• Lead a team of technicians to ensure the maintenance programs and rectification jobs are manage efficiently
• Responsible for the daily AC thermal comfort are within acceptable limit
• Plan and supervise all Preventive and Corrective Maintenance work activities, priorities and reallocate resource when required, on ACMV equipment system under the responsibilities of Facilities organization
• Lead and participate in equipment and system abnormalities root cause analysis, attend review meeting, and provide update, then execute corrective and preventive action for continual improvement, this includes installation and modification work on existing or new mechanical equipment and system
• Implement efficiency improvement on the operational process, innovating and implementing systems improvement on energy conservation
• Perform standby/duty to attend to system fault or after office hours, weekends and public holidays when required
• Minimise all facilities, building and services system downtime during operation.
• Ensure adherence to quality standards and health and safety regulations

Job Requirement:

• At least 3 years of hands-on experience in ACMV works or a related field.
• Thorough understanding of building regulations and health and safety protocols.
• Exceptional communication skills, with the ability to collaborate effectively with non-engineering team members.
• Strong problem-solving abilities and the capability to troubleshoot issues on-site

Job Descriptions

Enviroment: IFM

· Ensure daily AC thermal comfort remains within acceptable limits.

· Schedule and oversee maintenance activities for ACMV systems, tracking maintenance work and follow-up actions for systems such as chillers, air-conditioners, and fire protection systems.

· Make sure all maintenance tasks are executed according to the checklist and schedule.

· Enhance operational efficiency by innovating and implementing energy conservation improvements.

· Deliver excellent service to meet client expectations.

· Ensure maintenance programs and repair jobs are efficiently managed by a team of technical officers and technicians.

· Provide feasible solutions and coordinate with owners/users, consultants, vendors, and contractors to meet engineering functional requirements and achieve objectives.

· Conduct regular inspections of existing aircon systems to ensure maintenance programs are effectively implemented in strict compliance with instructions and guidelines.

· Ensure all work is performed safely and by safety procedures.

· Perform any other tasks as required by the Facilities Manager.

· To support other work/project assignments by the Head of Project or Direct Superior.

· Oversee day-to-day operational matters and challenges.

Job Requirements:

· Diploma/BS Degree in Mechanical, Electrical or Industrial Engineering with a minimum of 3-5 years in construction projects & Building maintenance/Operations/Engineering

· Able to guide and troubleshoot ACMV faults

· High Level interpersonal and leadership skills,

· Strong customer service, analytical, and interpersonal skills,

· Excellent organizational, project management, and problem solving skills,

· A proactive & positive person with a strong motivation to learn, self-starter, ability to handle multiple tasks and priorities,

· A good team player yet able to deliver independent assignments as required,

· High level of integrity, ownership and drive

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

As Environment, Health and Safety (EHS) senior engineer, you will be responsible for the implementation of Fab10’s EHS programs at the site. You will conduct/coordinate EHS training to employees, conduct periodic EHS audits and surveys to identify level of implementation and efficiency of EHS management system, identify potential gaps or improvement opportunities and recommend measures and improvement plan to management. You will also be liaising with external organizations on EHS compliance issues.

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Responsibilities and Tasks

• Ensure Micron's safety programs and procedures are effective, efficient, and conform to the Management System and regulatory requirements
• Develop and implements functional, cost-effective solutions for safety issues
• Coordinates, manages, and conducts safety walks, inspections, and audits to ensure operations comply with Micron safety procedure and regulatory requirements
• Responds to emergencies and investigates incidents and recommends preventive/corrective action
• Collect, analyze, and communicate safety related metrics and performance measurements.
• Support ISO System by participating in internal audits to continuously improve our safety program and procedures.
• Identify, develop, and provide safety training in accordance with company goals and objectives,

Education & Qualifications

• Bachelor's degree in occupational health and safety or related filed e.g. Engineering
• Safety and Health Certifications eg. Certified Safety Professional, WSH Safety Officer Certification, ISO auditor training and certification
• Experience with ISO 45001:2018 Occupational Health and Safety Management System
• Ability to read and develop understanding and interpretation of safety regulations
• Strong interpersonal communication and collaboration Department
• Minimum 4 years + of experience in related field

Develops, implements and monitors company safety programs and policies. Ensures compliance with government health and safety regulations. Conducts employee training in emergency response, life safety, industrial hygiene, and chemical and fire hazards. Conducts safety surveys and recommends corrective action where occupational hazards exist. Responds to emergencies and investigates accidents and recommends corrective action. Completes required federal, state and local government reports relating to safety.

Job Scope / Responsibilities :

1. Project planning and execution included resource management, control and coordination with subcontractors, suppliers and Consultants for Building Construction Works.

2. Preparation of the project schedule.

3. Check and analyze drawings, authority requirements and tender specifications.

4. Implement correct working methods, observe all safety rules & regulations.

5. Attend Technical & progress meetings with the owner.

6. Visit the site to solve interferences during construction and updating of As-Built drawings according to site.

7. Prepare checklists, procedures and closeout comments of the projects.

8. Follow the aftermath of the projects.

Requirements :

1. Diploma /Degree in Mechanical Engineering, Building Services Engineering, Green Building & Sustainability, Intelligent Building Technology, Specialist Dip in M&E Coordination.

2. Prefer local working experience in Construction industries

3. Good communication skills, independent & self-motivated

4. Knowledge of design & implementation of ACMV system

Interested applicants please submit your details CV & resume to the following email:

Email: hr@littleswanaircon.com.sg

As the Facilities Electrical Engineer, you will lead engineering and maintenance efforts for on-site electrical equipment and systems. With guidance from the Facilities organization, you will work towards achieving the goals of the facilities department, site, corporate facilities, and the company as a whole.

Job Responsibilities:

• Adhere to environmental safety policies, standard operating procedures, and quality standards. Perform risk assessments and maintain good housekeeping practices.
• Gain experience in maintaining and commissioning electrical systems up to 230kV, including emergency generators, Rotary UPS, and power quality equipment.
• Provide support for operational issues and root cause analysis using standard problem-solving techniques.
• Review and support capacity analysis for electrical systems.
• Review and advise on scope, schedule, and cost estimates for infrastructure additions or modifications. Supervise progress and provide engineering and design support during construction.
• Conduct risk and failure mode and effects analysis to eliminate single points of failure and mitigate risks.
• Guide, mentor, and certify the electrical team through classroom and site training.s.
• Participate in root cause identification for equipment and system abnormalities, conduct post-incident reviews, and implement corrective and preventive actions.
• Provide engineering support for system capacity expansion and improvement projects, ensuring alignment with production plans.
• Drive the implementation of SMART power systems, early detection, and team efficiency improvements.

Job Requirements:

• Bachelor’s Degree in Electrical Engineering required.
• Minimum 6+ years of experience in High, Medium, and Low Voltage Electrical Systems Design Maintenance and Operations, Semiconductor, and/or Facilities related Industry.
• Ability to prioritize and schedule workload and work on multiple tasks concurrently.
• Strong organisation skills and Service attitude.
• Excellent interpersonal skills and good team working skills, English Required.
• Self-motivated worker!
• Familiarity with semiconductor manufacturing and facilities systems.

Job Description:

• The System Engineering discipline understands the needs of the automotive customers and translates them into requirements for the other functional disciplines (e.g. electrical, mechanical, software etc.) for implementation. In the RFQ stage, the System Engineer takes the lead in providing the technical proposals of the product to the customers. In the product development stage, the System Engineer ensures and validates that the end product meets the customers’ expectations.
• Define and develop system architecture and innovative concepts for automotive electronic products (including but not limited to infotainment, displays, clusters and ADAS systems) in collaboration with platform teams.
• Drive new technology development and create innovative system solutions for proof-of-concept projects and RFQs.
• Support business development in acquisition activities and providing customers with the best solutions in terms of technology and cost.
• In product development, ensure customer requirements are met in the product design, through negotiating performance specifications with customers as required and translating customer requirements to internal requirements.
• Perform as Functional Safety System Engineer in safety related product development activities.
• Lead cross functional design reviews in system requirements, architecture concepts and system level DFMEA for the product.
• Support engineering teams in multi-discipline design reviews of interface specifications and design concepts, simulation results, and other module level testing results.
• Support engineering teams in product quality related issues, test specification definitions in system integration and system verification levels as well as manufacturing test development.

Job Requirements:

• Bachelor’s degree in Electronic/Computer Engineering or related field, with 8 years of experience in embedded system development, preferably in automotive industry.
• Experience in system level architecture and platform development in automotive electronic systems.
• Experience in product development and verification of embedded systems.
• Experience with CAN/LIN/Flexray/Ethernet and other vehicle communication network.
• Possess good technical writing, communication, and presentation skills.
• Good experience of system engineering process and related toolchains.
• Knowledge of IATF16949, ASPICE and automotive product lifecycle is desirable.
• Good understanding of ISO26262 standards and experience in SOTIF is preferred.
• Experience in cost and effort estimation for project quotations.
• Knowledge of Real-time operating systems (RTOS), QNX OS or embedded Linux will be added advantage.

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

As a DevOps Specialist, you will be required to:

• ​Work directly with clients Development team, product owner and various key stakeholders.
• Develop scripts and templates to automate infrastructure provisioning. ​
• Take ownership of end-to-end solutions provided by teams across the organisation. ​
• Provide system troubleshooting and problem solving across platform and application domains, expect to participate in on-call escalations to troubleshoot customer facing issues. ​
• Security and access control design IAM roles and utilize cloud native controls to meet security objectives and every infrastructure level and cloud services used. ​
• Capacity management and planning devise mechanisms to monitor and capture system. metrics and identifying potential bottlenecks at the infrastructure level. ​
• Assist in the migration activities for clients platform.

Qualifications:

• ​Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines. ​
• Passion for automation, standardization and best practices. ​
• Solid hands-on experience in designing, building, deploying and securing of highly available web application in cloud platform such as AWS, Azure or Google Cloud. ​
• Experience with Terraform, Atlassian JIRA, Confluence, Bitbucket and Bamboo. ​Experience in software-defined infrastructure (OpenStack, CloudStack, VSphere). ​
• Experience with infrastructure provision tools (Docker, Ansible, Puppet, Chef etc.). ​
• Network skills in firewall rules, load balancers, firewalls, VPNs, DNS. ​
• Basic understanding of DevOps principles and practices.
• Knowledge in DecSecOps will be an added advantage. ​
• Self-motivated and good communication skills. ​
• Experience in Agile development environment focusing on rapid quality delivery. ​
• High attention to detail, accuracy, meticulous to figures and processes in high agility environment.

Preference:

• ​Experienced with management cloud infrastructure and services / certification with GPC, GCC (i.e. AWS, Azure, Google Cloud) or equivalent cloud platforms will be preferred. ​
• Experience in one or more virtualization technologies (KVM, Xen, VMware, Hyper-V). ​
• Good understanding of the Linux operating system. ​
• Good understanding of Infra-as-code and Policy-as-code.