· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Work Scope:

• To repair electrical and electronic component of plastic processing machinery and equipment.
• To modify electrical and electronic circuit of machinery and equipment for upgrading, data logging & process automation etc.
• To install or de-install electrical works for factory building or machinery.
• To conduct periodical maintenance for electrical and electronic related works.
• To update and maintain electrical circuit drawing of all machinery and installation.
• To design and build new machinery that may improve production efficiency of factory.
• To assist in procurement for components and parts.
• To keep tooling in organized manner.
• Other duties as and when assigned by the company.

Job Requirement:

• Diploma or certification in Electrical Engineering or a related field.
• Minimum of 3 years of experience in industrial electrical maintenance.
• Able to read single-line diagram.
• Hands on experience in electrical installation and cabling
• Able to work independently with discipline.
• Have teamwork and is committed.
• Able to cooperate on overtime arrangement.
• On-job-training will be provided.

Working Conditions:

• Full-time position with potential for overtime.
• May require working in various environmental conditions, including high noise levels and confined spaces.
• Must be able to lift and carry heavy equipment as needed.

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Join our global team to help design, implement, improve, and operate our worldwide Internet Breakouts as well as the VPN Services for Bosch Users and partners. Ensure that the security infrastructure deployment and configurations align with industry standards, compliance requirements, and organizational security policies. Provide Level-2/Level-3 Support for our service portfolio, including shared on-call duty (remote). Collaborate closely with our Architects, Engineers, internal customers, partners, and stakeholders. Initiate, manage, and implement changes to our security infrastructure.

Responsibilities:

• Design, implement, and operate worldwide Internet Breakouts and VPN Services for Bosch Users and partners.
• Ensure security infrastructure deployments and configurations comply with industry standards, organizational policies, and compliance requirements.
• Provide Level-2 and Level-3 support for the service portfolio, including participation in shared on-call duty (remote).
• Work closely with Architects, Engineers, internal customers, partners, and stakeholders.
• Initiate, manage, and implement changes to the security infrastructure.

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Job Responsibilities:

• Design, implement and administer security infrastructure and measures to protect against potential threats
• Test and evaluate security products and solutions
• Monitor and investigate systems and infrastructure activities for signs of unauthorized access or malicious activities
• Lead or participate in internal and external security audits and risk assessments to identify vulnerabilities in existing systems, develop and implement remediation plan for closure
• Review the technical design and facilitate onboarding process for new systems to ensure security compliance
• Develop security policies and procedures and manage compliance
• Create incident response plans; lead and manage incident response
• Promote security awareness and conduct routine social engineering tests for end users

Job Requirements:

• Bachelor’s degree or diploma in Computer Science, Information Technology, Cybersecurity, or a related field.
• 4-7 years of experience in IT or cybersecurity roles.
• Fundamental knowledge on IP networking (e.g. TCP/IP, routing, etc.) and Firewalls (e.g. FortiGate).
• Strong analytical and problem-solving skills.
• EPP/EDR product certification such as Trellix ePO, Symantec Endpoint Protection is an advantage.
• Experience in implementing security products such as SIEM, NIPS, EDR System is an advantage.
• Security Certifications such as GISA, GSEC, CISSP, CISM is an advantage.
• Proficiency in network security and encryption technologies.
• Knowledge of security frameworks and industry best practices (ISO 27001, NIST Cybersecurity Framework, and PCI DSS).
• Experience with vulnerability assessment and penetration testing.
• Strong understanding of secure coding practices.
• Expertise in configuring and managing firewalls, intrusion detection systems, and other security devices.
• Effective communication and collaboration skills to work with cross-functional teams.

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

Sales Engineer offers specialized chemistry programs and related services for downstream oil and gas operations, aimed at maximizing production, protecting assets, and reducing operating costs and environmental impact. Through on-site problem-solving and innovative technologies, our team delivers solutions that assist energy customers in overcoming complex challenges in the most demanding energy frontiers. Our downstream team utilizes advanced chemistries and technologies to provide Oil & Gas customers with comprehensive and sustainable solutions to safeguard their assets, mitigate risks, and enhance profitability

Responsibilities:

• Leading Chemical Treatment Programs: Responsible for the chemical treatment programs at the client’s site, ensuring optimal performance and promptly addressing any deviations from the treatment plan.
• Analytical Field Testing: Comprehend the principles of field testing procedures and collaborate with service technicians to perform routine field testing
• Reporting and Communication: Provide regular chemical treatment program reports to clients, keeping them informed about progress and updates according to the agreed schedule.
• Inventory and Equipment Management: Oversee the planning of chemical stock levels in Singapore and manage inventory at client sites. Maintain an equipment maintenance program to ensure 100% equipment uptime and seamless operations.
• Monthly Technical Review: Prepare and deliver comprehensive monthly review materials to clients. These reviews serve as a valuable platform for discussing program effectiveness and identifying areas for improvement.
• Value-Added Projects: Actively source and develop value-added projects in collaboration with clients. These projects are designed to reduce the Total Cost of Operation (TCO) with Ecolab’s product.
• Troubleshooting and Collaboration: When clients encounter challenges related to chemical treatment programs or Ecolab’s products, step in to troubleshoot and collaborate with team members to find solutions.
• Proposal Development for New Opportunity: Develop chemical treatment proposals to enhance efficiency and address specific client requirements. Present new chemical treatment proposals to client. Lead the initiation and evaluation of new applications.
• Contract Management: Collaborate with application engineers and service technicians to ensure compliance with contractual obligations.
• Business Performance Review: Prepare and present the executive performance results material to the key client stakeholders and the head of the department. This can occur quarterly, half yearly or annually depending on contract obligation.
• Client Relationship Management: Building and nurturing strong relationships with clients is paramount. Frequent engagement ensures effective communication and mutual understanding.
• Billing and Invoicing Process: Maintain bookkeeping for client accounts under your responsibility. Verify billing amounts and work with the billing team to issue invoices to customers.

Requirements:

• Bachelor’s Degree (Chemical Engineering) with at least 8 years of relevant technical Sales & Service experience
• Should have technical sales or field sales support experience
• Must have a valid Class 3/3A Singapore Driver’s License
• Working knowledge of boilers, cooling towers, and wastewater treatment systems
• Experience with refinery or chemical processing is advantageous
• Curious and eagle to find out what customers’ needs and good approach to solutioning
• Effective critical thinking and problem solving skills
• Customer oriented and always ready to engage with customers
• Able to work in a refinery/chemical plant

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities：

1. Responsible for pre-sales support of products and problem solving solutions, assisting sales to research and analyze customer demand, formulating technical proposal and tender, expounding on technical solutions, demonstrating products and answering technical inquiries.

2. Assist sales to promote and sell products and problem solving solutions.

3. Collect and feed back customer’s opinions on products and technology to the technical department. Deepen solutions according to customer’s demand, and assist technical engineers to implement solutions.

4. Conduct relevant technical training for internal sales and pre-sales as well as external partners.

Requirements：

1. Bachelor degree or above; Computer, automatization or logistics majors are preferred.

2. Have three years and above experience in logistics automation, e-commerce or ERP-WMS; Experience in solution design, technical consultation, and project bidding is preferred.

3. Capable of analyzing, guiding demand and designing solutions in logistics, manufacturing storage, e-commerce and related IT systems.

4. Problem solving oriented , honest, pragmatic and responsible, highly enthusiastic and a team player.

5. Good communication and presentation skills, English can be used as working language; Proficiency in two or more foreign languages is preferred.

6. Willing to travel a lot.

...

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

Project Design & Engineering Calculations and Proposal drawings to Client.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as Equipment sample or Site measurement studies

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Schedule the project in logical steps and budget time required to meet deadlines.

Site & office project management and daily operations including Engineering Design, Drawing and Fabrication, inspections, site measurements and handover to client’s.

Attend Site meeting, Equipment rectification in assembly and dismantling when required.

Overall project planning, scheduling, monitoring, and updating to meet project completion targets.

Liaison and meeting with client's representatives, relevant authorities, and consultants.

Site co-ordination, monitoring and report work progress.

Flair in design; able to sketch fast and produce good design concept

Coordinate all new and current on-going projects and able to communicate well with all levels

Review M&E Design Drawings and ensure compliance with design specifications and guidelines. Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Review incoming engineering, ISO piping drawings and assess impact of extra work or changes on schedule.

Ensure all regulatory and statutory requirements regarding testing and record keeping are met.

Supervise and coordinate M&E and Mechanical piping/equipment installation in accordance with approved drawings and materials. Coordinate M&E details with Clients, Consultants, Sub-contractors and other site staffs.

Monitor performance of multi-skilled craft workers in the installation, removal, or adjustment of equipment or components in accordance with established project procedures, requirements and specifications.

Monitor construction schedules, methods, manning charts, materials and equipment requirements.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Supervise electrical and instrumentation construction work as per IFC drawings.

Monitor construction schedules, methods, manning charts, material and equipment requirements.

Monitor the activities of contractors and subcontractors performing craftwork, ensuring compliance with project quality, safety, and security requirements.

Min 5-7 years’ of experience in Engineering related activities in Mfg, Recycle, Oil & Gas and Chemical plant industry.

Responsible for safety of supervised personnel; ensures that craft personnel comply with established safety policies and procedures, and that they practice safe work habits.

Applicable only for Singaporeans / PR's

Beng Hui Marine Electrical Pte Ltd (a subsidiary of BH Global Corporation Ltd) is looking for someone who is motivated and leads by example and is willing to drive sales through proactiveness and hard work. We always believe in rewarding results.

Responsibilities

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: Create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Requirements

• Diploma or Certifications in Marine / Engineering or relevant fields.
• Candidate with experience in the marine or similar industry is preferred.
• Industry Technical Knowledge: Understanding of the marine or similar industry, including knowledge of similar products, services, market trends, and customer needs.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.
• Professionalism: Demonstrated professionalism, integrity, and a customer-focused approach in all interactions.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

Be part of our journey toward digitalization, where you’ll play a key role in advancing automated systems and smart technologies to enhance efficiency. Join a team that leverages innovation to transform manufacturing processes and deliver exceptional quality.

Key Responsibilities:

• Provide control system support, to improve efficiency and reliability of manufacturing equipment and processes.
• Collaborate closely with mechanical, validation, and process engineers to optimize equipment & processes including data analysis for problem resolution.
• Initiate and spearhead software improvement projects on control systems and manage testing, validation and implementation
• Engage in cross-functional team projects aimed at machine and process improvements, embodying teamwork, responsibility, and a capacity for independent work.
• Lead training sessions to enhance the technical skills of operational and technical teams, ensuring smooth transfer and operation of automated equipment.

Minimum Requirements:

• Degree in Engineering or related field.
• 3 years work experience in designing control systems for manufacturing equipment
• Competent in SCADA and PLC programming
• Knowledge in C# will be an added advantage

Responsibilities

• To be the liaison for the coordination of M&E works to ensure works are carried out as per schedule and local authorities’ quality standard.
• To supervise and ensure that work done are in accordance with the required drawings and specifications as per the contract.
• To monitor closely and report promptly work progress to superior.
• Coordinate and prepare technical submissions with sub-contractors and suppliers to ensure timely work arrangements.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Diploma in Civil Engineering/Building Construction/Mechanical Engineering or any equivalent qualification or relevant on-the-job experience are welcome.
• More than 3-years of work experience in the Construction sector would be preferred.
• Good team player and able to work independently.
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

Halliburton invites qualified candidates to apply for the Software Engineer position.

The Software Engineer will leverage his/her strong software design and programming skills to provide technical leadership and build software solutions to address complex business needs.

Responsibilities

• Design and develop professional quality desktop applications in an agile environment
• Perform analysis to define system scope and objectives in order to develop and/or modify existing engineering applications
• Ensure the Technical Software Development process is optimized and projects are on track
• Define requirements, functional specifications, and testing documentation for various engineering software applications
• Design and develop unit test for code validation and automated regression testing of overall systems validation
• Incorporate lab testing and field testing with various cross-functional teams
• Job role contributes to value creation

Required Education and Skills

1. Bachelor’s degree in Computer Engineering or Computer Science
2. Minimum 3 years of related experience in software development.
3. Self-initiative, independent and a good team player
4. In addition to the above, candidate must have a minimum of 3 years of experience in the following

• Strong development experience using C++
• Developing desktop applications and reports using C#, Python, HTML, Java Script, XML, JSON technologies
• Developing Graphical User Interfaces (GUI) using WPF/XAML and MFC
• Developing multi-threaded applications
• Developing Real-Time solutions (applications that run within a fixed-time constraint)
• Developing software using SQL, MS Access DB and MongoDB
• Developing software via Agile software development methodology
• Debugging software applications at different stages of maturity, ranging from development-prototype through to commercial-production maturity levels
• Developing, debugging, and supporting software applications both locally and in remote locations
• Developing software that directly interfaces with electrical devices (sending/receiving data, controlling electrical devices via software)
• Experience working in cross-functional teams including mechanical and electrical engineers, acoustic and electromagnetic scientists (SME), and software architects
• Experience in Embedded Software development and Real-Time Operating System is added advantage

**Candidates having qualifications that exceed job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs.

Work Location: 315 Jalan Ahmad Ibrahim Singapore 639940 (company transport provided)

Work Schedule: 7:30 am to 4:30 pm

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

• Design and building of infrastructure/ Water plant / building engineering works (Civil / Structural)
• Conducting technical feasibility study, life cycle study and planning for building engineering.
• Preparation of design report, calculation, drawings, specification, cost estimation and details / schedules for projects.
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Evaluation of tenders and preparation of tender assessment reports.
• Assist Professional Engineer in liaison preparation and follow up of authority submission.

Requirements:

• Bachelor Degree / Diploma in Civil / Mechanical / Electrical Engineering
• Minimum 5 years hands-on design experience in building and/or infrastructure projects
• Good project management and technical skills
• Familiar with local code and authority submission procedures
• Team player and able to work independent with minimal supervision
• Proficient in AutoCAD and BIM
• Good communication skills; ability to work well in a team
• Must hold valid Singapore License

The Air Traffic Management Research Institute (ATMRI) is the first institute in Singapore to be entirely dedicated to Air Traffic Management research. As part of its agenda for innovation, it is seeking to recruit a Research Engineer to work on the AI-Assisted ATFM project, to deliver an operationally ready prototype of an AI enabled ATFM system. This job will be responsible for contributing to the research transition into development, by documenting existing AI tools, including those designed by ATMRI researchers, and integrate them into operational software development.

Key Responsibilities:

• Interpret research papers and program, for conversion into applicable software development. Develop a vision for transforming research papers into technologies ready for deployment.
• Design and develop the front and backend of the applied research, for operational use. Work closely with the researchers and stakeholders to design a user-centric, ready for development software that emphasizes the benefits for end-users.
• Rigorously document every aspect of the software development, for integration into industrial development.
• Participate in meetings and workshops with fellow researchers and stakeholder partners to discuss the future directions for research and development.

Job Requirements:

• Bachelor / Master of Engineering in Computer Science or a related field.
• Impeccable English writing and communication skills
• 1+ year experience in industrial software development
• Experience in the development of APIs, UI, authentication and actualization systems, with proficiency in several programming languages (Python, Java, C++…)
• Industrial or operational prior experience in air traffic services is a plus.

We regret that only shortlisted candidates will be notified.

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as a global technology, defence and engineering group, spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Join our team of highly motivated individuals in the engineering cutting edge solutions that unify both cybersecurity and productivity. As our Cyber Security Product Engineer, you will join a team of specialised engineers to deploy, configure and support our indigenous and robustness cybersecurity products.

Job Description

• Participate in the product and project implementation and coordinate new installations, designs and migrations for security technology and solutions.
• Understand customer’s requirements and transform to technical control & technical solution
• Install, configure and upgrade Cyber Security Products
• Troubleshooting, diagnosing and resolving hardware, software, and other network and system problems on the customer's site
• Liaise with vendors and internal team for resolution solutioning for problems encountered.
• Monitor compliance to applicable codes, best practices, security standards and specifications for the delivery of security technology and solutions.
• Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the ICT infrastructure.
• Cooperate and communicate effectively with project manager and coordinate with other project participants to deliver functional solutions and provide assistance and technical support.
• Create and maintain technical documentation for reference and reporting.
• Create, oversee and test system integration and security requirements (e.g. system integration test plan, system security acceptance test plan).
• Review findings from vulnerability assessment and penetration testing.
• You will learn system and cyber security knowledge with the team.

Requirements

• Possess 5-7 years of similar experience
• Familiar with cyber security products and project implementation
• Possess networking knowledge
• Possess basic knowledge in Linux
• Soft skills – Problem Solving, Communication and Teamwork Skills
• Singaporean only
• Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.