We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

About Sleek

Through proprietary software and AI, along with a focus on customer delight, Sleek makes the back-office easy for micro SMEs.

We give Entrepreneurs time back to focus on what they love doing - growing their business and being with customers. With a surging number of Entrepreneurs globally, we are innovating in a highly lucrative space.

We operate 3 business segments:

Corporate Secretary: Automating the company incorporation, secretarial, filing, Nominee Director, mailroom and immigration processes via custom online robots and SleekSign.  We are the market leaders in Singapore with ~5% market share of all new business incorporations.

Accounting & Bookkeeping: Redefining what it means to do Accounting, Bookkeeping, Tax and Payroll thanks to our proprietary SleekBooks ledger, AI tools and exceptional customer service.

Business banking: Overcoming a key challenge for Entrepreneurs by offering digital banking services to new businesses.

Sleek launched in 2017 and now has around 15,000 customers across our offices in Singapore, Hong Kong, Australia and the UK.  We have around 450 staff with an intact startup mindset. 

We have achieved >70% compound annual growth in Revenue over the last 5 years and as a result have been recognised by The Financial Times, The Straits Times, Forbes and LinkedIn as one of the fastest growing companies in Asia. Backed by world-class investors, we are on track to be one of the few cash flow positive, tech-enabled unicorns based out of Singapore.

Sleek is also a proudly certified B Corp.  Since we started our journey in 2017, we’ve been committed to building Sleek as a force for good. In just over 5 years, we’ve joined a community of industry leaders like Patagonia, Ben & Jerry's, and P&G who are building an inclusive, equitable, and a regenerative economy. We have planted over 29,271 trees to reforest our ecosystem and saved 7 tons of paper from landfills by processing over 1.4M pages through SleekSign. We aim to be Carbon Neutral by 2030.

About the role

We are looking for a Principal Engineer that is excited about the below Mission and Outcomes over the next 6-12 months.

Mission: Work closely with product teams to translate our business vision into impactful technical solutions. Drive the alignment of product requirements with strategic goals, ensuring each feature not only meets user needs but also advances our core objectives. Be pivotal in bridging the gap between business aspirations and technical execution, tackling complex challenges, and setting the stage for an exceptional user experience. Shape the roadmap, influence design decisions, and empower our team to deliver innovative, high-quality solutions every day.

Outcomes: 

1. Limit issues on KYC through Onfido/Myinfo to <1% of all onboarded customers.
2. Halve support tickets related to KYC onboarding by way of implementing an intuitive KYC flow and updating SOP with stakeholders.
3. Ensure 100% of customers' identity is compliant and up-to-date in platform by automating regular due-diligence checks in line with risk profile.
4. Review implementation of compliance flows related to information collection and validations, such as change of particulars, KYC invitations, address validations, and shareholder acceptance, ensuring that all information is accurate and certified.

To do this, you will have a minimum of 8 years experience as Fullstack Software Engineer or Software Architect and you will most likely be located in Singapore.

We are looking for a highly skilled Fullstack Engineer with a strong blend of technical expertise and business acumen. The ideal candidate will possess:

1. A solid academic foundation, preferably from renowned universities.
2. Proven experience working with leading organizations, demonstrating success in high-performing teams.
3. Over 8 years of expertise in Fullstack Engineering, with in-depth knowledge of both front-end and back-end development.
4. A demonstrated ability to translate technical skills into product-driven outcomes, creating significant business impact.
   

Behavioural fit is also important at Sleek, and we will be looking for candidates that have a proven track record of embodying the below attributes in their recent roles:

Ownership: This shows reliability and helps build trust within the team. We move fast and need to know that everyone will see things through to completion and proactively help to get things back on track when challenges arise. Accountability is really important to us.

Humility: There is so much we don’t know. Humility allows for open-mindedness to feedback and a willingness to learn from others. It paves the way for collaboration and creates a positive work environment. It is a key ingredient of self awareness and emotional intelligence.

Structured Thinking: Our business is complex with many layers (many services, many countries, many cultures). Regardless of whether you’re more analytical or creative in nature, being able to show sound judgement is important to us. It ensures solutions are pragmatic and balance the needs of the organisation, team and customers.

Data driven: We are a data rich business with ~15,000 small customers.  Each decision we make can impact many more people than we realise - so it’s critical that we use sound data to support our strategies and review the success of our initiatives.

Can have tough conversations in a positive way: It’s not a matter of if, but when difficult interpersonal situations arise.  Disagreement, conflict and disappointment are a given in a fast moving business where people care about their work.  People that proactively have tough conversations with kindness build empathy, trust and great working relationships. 

Problem Solving: You’ll need to be able to think on your feet as this role requires you to identify, diagnose, and resolve production issues quickly, reducing downtime. You will leverage your strong infrastructure and development skills in post-incident reviews to find the underlying cause of failures and prevent future incidents.

User-centric: You understand the importance of system reliability and performance for both internal and external users and make sure users are heard before suggesting solutions. Our business relies on our platform availability and you need to be cognizant of your actions as it comes with great responsibility.

Humility and kindness: Humility is a core attribute we hire for, which means we have a culture of not taking ourselves too seriously and being able to laugh. Kindness is also incredibly important. We are committed to creating and nurturing a diverse and inclusive environment. 

Flexibility: You’ll be able to work from home 5 days per week. If you need to start early or start late to cater to your family or other needs, we don’t mind, so long as you get your work done and proactively communicate. You can also work fully remote from anywhere in the world for 1 month each year.

Financial benefits: We pay competitive market salaries and provide staff with generous paid time off and holiday schedules. Additionally, you’ll be able to access our S$1,200 pa flexi benefits scheme for home office equipment or health and fitness expenditure.  Certain staff at Sleek are also eligible for our employee share ownership plan and can share in the upside of our stellar growth trajectory as we work toward listing on a prominent stock exchange in the Asia Pacific region.

Personal growth: You’ll get a lot of responsibility and autonomy at Sleek - we move at a fast pace so you’ll be making decisions, making mistakes and learning. There’s also a range of internal and external facing training programmes we run. We’re also at the forefront of utilising AI in our space and are developing a regional centre of AI excellence. It is our intention that if you leave Sleek, you leave as a more well-rounded person and professional.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

Job Description & Requirements

Job Responsibilities :

• Preparation of document for presentations.
• Attending site visit for tendering project and project management.
• Involve in solving construction issues raised by construction teams
• Other duties assigned from time to time.

Job Requirements :

• Degree in Civil / Structural Engineering recognized by BCA and preferably recognizes by Professional Engineering Board, Singapore.
• At least 5 years of relevant experience preferred
• Familiar with AutoCAD, Microsoft word, Excel and Project
• Familiar with latest code of practice as per BCA requirement

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• At least 6 years of working experience in the related field is required
• Having experiences in LTA Project would be bonus and advantageous
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• Willing to work in site office

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Highlights

• Attractive salary package

• Basic Salary + Commission + Vehicle Allowance

• Excellent benefit

• Dynamic working environment

• 1.5 days WFH

Job Description

• Continually meeting or exceeding sales targets by selling company products to new and existing customers.

• Services existing accounts, obtain orders, and establishes new accounts by planning and organising call/visiting on existing or potential sales prospects.

• Establish, develop and maintain positive business and customer relationships.

• Monitor the company’s industry competitors, new products, and market conditions to understand a customer's specific needs.

• Conduct calls and face-to-face meetings with customers daily.

• Developing and implementing an effective sales strategy to drive sales.

Job Requirements:-

- Positive attitude, self-starter

- Have a sense of responsibility

- Adaptable/flexible thinking

- Strong interpersonal skills

- Always team focused

- Processes a class 3 licence with own transport

- Min 2 year experience in industrial / construction / Marine sales

- Experience with hose management is strongly preferred

Working days: Monday – Friday 8:30am – 5:30pm

Saturday 8:30am – 1:00pm (alternate)

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

JOB DESCRIPTION

* Design and develop Mechanical Equipment/Systems, keeping in mind budget, timelines and other essential resources.

* Work with a team of Engineers in the creation of new product designs, ensuring alignment with project objectives and timelines.

* Utilized CAD Software to create 3D Models and details drawings for new product development.

* Implemented design modifications and optimizations to streamlne the assembly process.

* Collaborate with cross functional teams including product management, manufacturing and quality assurance to ensure successful product development and launch.

* Troubleshoot problems and devise solutions to resolve them.

* Research and keep up with the Dynamic Technology and trends in the mechanical design spectrum.

REQUIREMENTS

* Degree in Mechanical Engineering.

* Knowledge in dealing with Engineering Drawings and 3D Modelling.

* Experience working with designing software - Solidworks and Autocad.

* Minimum 5 years of relevant working experience as Mechanical Design Engineer.

* Able to work independently with minimal supervision.

* Strong verbal, written and communicatin skills.

* Sound knowledge of Computer Application and Microsoft Office.

* Willing to work on weekends and travel occassionally if required.

Job Responsibilities:

• Responsible for leading the planning and design of Mechanical engineering works for building services and infrastructure works.
• Review reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Supervise the installation, testing and commissioning of Mechanical engineering works.
• Work together with other disciplines in feasibility studies and design, as well as to ensure excellent service delivery to Clients.
• Job Title will correspond with project experience acquired and individual competency in technical knowledge/skills, project management and contract administration.

Job Requirements:

• Degree in Mechanical Engineering recognised by the Professional Engineers Board, Singapore.
• Ideally registered with the Professional Engineers Board, Singapore.
• Minimum 6-8 years of relevant experience in Mechanical engineering design for building services and infrastructure works.
• Good working experience in a consulting firm with a proven track record in major development projects.
• Conversant with local codes and regulations, and authority submission procedures.
• Strong planning, organizational and supervisory skills.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.

As a Salvage engineer, the world is your playground. You never know when or where a ship gets into trouble. That is why for a Salvage Engineer literally every day is different. It sounds like a cliché, but it is the reality. As a Salvage Engineer, you will have an adventurous job. When a ship is in distress, you will travel to the emergency scene with a multidisciplinary team. Once on-site, you work together with the team to repair the ship's plant and get the systems up and running again. It is vital to salvage the vessel as quickly as possible. As well as working on actual ship salvage operations.

Your responsibilities as a Salvage Engineer

• As part of the mobile team, provide support to the Salvage Master/Project Manager at site.
• When at base, assisting the technical manager and the operations manager in the selection of new salvage equipment and setting up the right maintenance procedures.
• Maintaining company owned salvage equipment.
• Sharing knowledge with other engineers about complex ship's systems.
• Advising the salvage inspector and superintendent about how to break into existing ship's systems in order to use them during the salvage operation.
• Producing reports about the actions taken to get systems operational again. As you can expect from a leading international maritime service company, you will work with state-of-the-art equipment.

Your qualities
To make your mark as a salvage engineer with SMIT Salvage, you will need a flexible approach; you never know when or where your next project will be. You adapt easily to working with different teams and you are fully proficient in English. Of course, you are happy to work irregular hours and to spend longer periods of time abroad. In addition, you have:

• A minimum degree in any field with experience sailing onboard ships.
• Worked for at least 5 years on modern (merchant) ships.
• Preferably experience with a range of different types of vessels and engine-room plants.
• Willingness to work on weekends and public holidays frequently, with OT and allowances compensated.

Job Responsibilties:

• Plan and design mechanical engineering works for building services.
• Prepare reports, specifications, calculations, drawings and other documents prepared for the different stages of a project.
• Conduct design presentations, review shop drawings and material/equipment submissions, handle RFIs and other contract administration duties.
• Oversee the installation, testing and commissioning of Mechanical engineering works.

Job Requirements:

• Degree in Mechanical Engineering from a University recognized by the Professional Engineers Board, Singapore.
• Minimum 3-5 years of relevant experience in mechanical engineering design.
• Good working experience in a consulting firm with proven track records in major development projects.
• Knowledge of mechanical engineering design systems software.
• Knowledge of AutoCAD and/or Autodesk Revit is advantageous.
• Conversant with local codes and regulations, and authority submission procedures.
• A team player, able to work both independently and as a group, ensuring excellent project delivery to Clients and other stakeholders.

We are seeking a dynamic Junior Data Engineer to join our Regional Data team to help foodpanda make smart, data-driven business decisions. We maintain data ingestion pipelines while creating and maintaining products and frameworks to empower teams to craft insights and build quality data products.

Responsibilities

• Architecting, defining, and building data pipelines to enable faster, better, data-informed decision-making.
• Ingesting first and third-party data sources into our petabyte-sized data warehouse.
• Curating and maintaining high-quality data assets so our data scientists and analysts can make informed decisions and create better products.
• Creating and maintaining tools that enable data consumers to use our data better.
• Collaborating with cross-functional teams to deliver high-quality data assets.

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902