A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

- In charge if production, scheduling ,planning and coordination of the assigned projects

- Liaise with contractors on the requirements of the projects

- To asisst the Site Manager in the coordination and execution of the projects

- To perform the duties which are assigned from time to time

- Must possess at least a Diploma in Civil or Building, degree or equivalent

· Please include your current and expected Salary in your resume

· Identify & develop new business opportunities

· Establish new accounts as well as maintaining with existing customers

· Meeting Company objectives and expectations

· Marketing function for new products

· Corresponding with customers on quotations and purchase order related issues

· After Sales service calls

· Diploma in Mechanical or other disciplines with or without experience.

· Dynamic, outgoing personality and self-motivated.

· Able to work independently as well as a team player in a fast paced and pressurized environment.

· Class 3 Driving License and possess own vehicle will be an advantage.

Position Summary

• To ensure legal compliance for all activities within assigned area of responsibility.
• To ensure a safe and healthy work environment within assigned area of responsibility.

Responsible for: (The main job activities)

• Ensure legal compliance for all activities within relevant regulatory framework and PaxOcean’s HSE Management System
• Support HSE Manager to implement and execute HSE Programs & Initiatives
• Plan, conduct and participate in audits to identify potential areas of improvement and best practices.
• Organise and conduct regular HSE site inspections with all relevant stakeholders and follow up on all identified non-conformances
• Function as a safety assessor as per relevant regulatory requirements
• Function as a Site Incident Controller (SIC) and lead the Company Emergency Response Team (CERT) during emergency situations
• To serve as secretary for the Vessel Safety Coordination Committee (VSCC) for all assigned projects
• Initiate and conduct investigation for the purpose of identifying root causes upon any occurrences
• Liaise with relevant authorities as point of contact representing PaxOcean
• Any other tasks or responsibilities as assigned by HSE Head

Job Requirements

• Diploma / Degree in any Engineering field or related discipline
• Hot work Assessor
• Confined Space Assessor
• Work at Height Assessor
• Relevant emergency response certifications will be an added advantage
• WSH Level C
• Candidates without prior experience are encouraged to apply.

Duties/Responsibilities

Drive Project Operations Dept.

1. Assists Project Manager to overseas the projects in charge

2. Ensure the project engineering issues are on schedule/within budget

3. Work closely with Engineering Service dept. to ensure accurate & updated construction drawing

4. Work with Supply Chain & Procurement on machinery and materials orders

5. Monitor all the material wastage

6. Deployment of resources (manpower, material, machineries) required to achieve project schedules

7. Ensure the sub-contractors to achieve project requirement & schedule

Prepare Risk Management Plan

1. Build contingencies in to the plan to provide a reserve in the schedule for unforeseen future problems

Administer Workplace Safety and health (WSH) and Environmental Management Systems (EMS)

1. Ensure workers/sub-contractor comply with the company safety regulation

Organise and Proper Handover the Completion Project

1. Ensure proper accurate handover of construction documents to the Clients

2. Ensure the Sub-contractor submit the proper handover documents to the company

3. Ensure the project deliver by us and sub-contractor to client(s) on schedule with "0" defect

Manage a Team with Good Technical Knowledge

1. Build and train a competent Supervisor, Leadmen and worker team

As work roles evolve over time, company may change your job scope, based on organizational needs and employee abilities, from time to time.

Job Responsibilities

- Supervise Plumbing & Sanitary installation works.
- Discuss with Main Contractors, Sub-Contractors & Suppliers and Consultant if necessary.
- Documentation of method statement and work procedures.
- To develop, monitor, and review site construction activities to ensure work completion as scheduled.
- Manpower arrangement and supervise/manage site arrangement.

Working Day: 6 days per week

Job Requirements

Min 3 years experience in similar experience and managing a few sites.
Knowledge of Plumbing/Sanitary and Gas as an Advantage.

· Manage and grow customer base on the assigned product range.

· Prospecting sales visits and regular follow-ups to customer relationship

· Offer commercial and technical proposals or quotations according to technical specifications and customer requirements

· Tender preparation, sales presentations, conversion of prospects to customers and after-sales service

· Gather regional market and competitor information (technical, prices and product development), ensure meeting pre-determined targets.

· Formulation and execution of market growth strategies for tasked Segment and territories

· Collaborate and work with other department/ regional offices to maximise growth and orders

· Prepare and deliver technical presentations and demonstrations to clients

· Collaborate with the engineering and product development teams to understand product specifications and capabilities.

· Oversee and coordinate the installation and implementation of products and systems.

· Ensure projects are completed on time, within scope, and within budget.

· Prepare and present sales proposals, contracts, and agreements.

· Track and report on sales performance and progress against targets.

· Maintain accurate records of customer interactions and transactions.

· Provide post-sales support to ensure customer satisfaction and repeat business.

· Address customer inquiries and resolve issues in a timely and effective manner.

· Gather customer feedback and work with internal teams to improve products and services.

· Traveling within the designated region to meet clients and manage projects as require.

· Participate in industry conferences, trade shows, and networking events to promote the company and its products.

Requirements:

· Diploma in Marine/Mechanical/Electrical/electronic/Engine

· Possess good sales and customer service knowledge

· 7-10 years of sales experience in marine diesel engine or marine equipment related experience.

· Self- motivated, independent and sales driven to develop and increase revenue

· Strong learning curves in upgrading technical knowledge

. Excellent presentation and negotiation skills

· Regional travelling is required

· Good oral and written communication skills in English and Chinese

. ⁠Other assigned duties

For more information, please reach us at [email protected]

*Only shortlisted candidates would be notified*

Job Responsibilities:

1. Assisting and supporting technical sales team in terms of scope of supplies and costing with respect to electrical, automation requirements during the prospecting stage for water/wastewater related systems and projects.
2. Liaising and communicating with agents/distributors/OEM partners/end-user customers on technical details and specifications of parts and components where EICA works are concerned.
3. Design and producing electrical, control panel drawings (AutoCAD or Eplan), BOM list generation and hardware component selection.
4. Developing PLC programming & HMI project (Siemens /Allen Bradley etc) for all process and functional controls of water/wastewater related systems and instrument.
5. Liaising, negotiating, and managing sub-suppliers/sub-contractors in Singapore and in the region with respect to procurements of all wiring and cabling works, fabrication and assembly of control panels for systems as well as for in-situ installation of water/wastewater related systems or projects.
6. Determining and monitoring procurement and production progress and schedules where cabling and wiring works, control panels’ PLC works and supplies are concerned.
7. On site electrical installation supervision, electrical panel testing, instrumentation configuration, loop test and automation commissioning works.
8. Compiling and handing over operation and maintenance (O&M) manuals (electrical and PLC portions etc) to our agents/distributors and end-user customers.

Requirements:

• Diploma / Degree in Electrical Engineering or Computer Science.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Minimum 5 to 8 years of working experience in Water Industry or engineering projects would be advantageous.
• Knowledge of PLC programming (Siemens /Allen Bradley etc)
• Willingness to travel locally or to regional countries occasionally for site installation, trouble-shooting or testing and commissioning duties at clients' project sites
• Able to work independently and a good team player.
• Senior position will be considered for candidates with more experience.
• Candidate who are able to start work within short notice or immediately would be advantageous.

Job Descriptions:

• Technical window for new product development.
• Involvement in developing the methodology for implementation of new and improved processes.
• Perform hands-on testing such as setting up the presses, moulds, process development and other engineering activities.
• Develop and document moulding processes, ensuring they meet all technical and quality standards, including DOE and process window study.
• Utilize scientific moulding principles to analyse and troubleshoot process issues, implementing corrective actions to improve efficiency and product quality.
• Preparation of process-related technical documentation, like FMEA, validation protocol, engineering report, evaluation processing parameters and data.
• Trial new tooling and equipment and make modifications as needed to meet quality and production goals.
• Liaison with customer engineering teams, incorporate customer engineering concepts, and ideas into feasible designs to fit facility/company manufacturing process.
• Use creative skills to assist in solving design or manufacturing issues or constraints.
• Provide primary tooling component and packaging cost input for quotation of new business.
• Work closely with the internal engineering team and outside vendors in tooling, equipment, component and material development.
• Work closely with customers on product, project or system development issues.
• Keep up on the latest industry standards, processes and procedures.
• Participate in formal improvement team activities.
• Support all development and initiate improvements to achieve business objectives.
• Travel to other sites and customer sites to perform testing onsite and knowledge transfer when required.
• Other tasks as assigned by supervisors/managers.

Requirements:

• Diploma/Degree in Mechanical Engineering/relevant field
• Strong mechanical aptitude and problem-solving skills.
• 5 years of hands-on working experience and process DOE will be a plus.
• Experience in the Medical Device Manufacturing industry.
• Experience in LSR will be a plus.
• Experience in Minitab software will be a plus.
• ISO9001 and ISO13485 awareness certification will be a plus.
• Good communication skills.
• Lead the technical team and provide training where required.
• Able to liaise with customers and interact with relevant persons in technical discussions.

A quantity surveyor may work for either the client, the contractor or sub-con, working in an office or on site. They are involved in a project from the start, preparing estimates and costs of the work.

When the project is in progress, quantity surveyors keep track of any variations to the contract that may affect costs and create reports to show profitability.

Aside from Quantity Surveyor, he or she will also act as project engineer wherein will take charge of the suprvising the project, adhere to construction procedures, coordinate all work schedule with the main con and liase with project manager and archi coordinator.

He or She should monitor and ensure that the work progress is within project schedules and manage the project independently as well as lead and motivate team.

Estimation of quantities, preparing BOQ, BBS as per drawing.

• Coordinating with Design & Construction team.

• Review engineering drawing and specifications and ensure the correctness of transfer of drawing details to ground, Checking all centering and reinforcement works.

• Physical measurement of quantities and tracking the productivity.

• Ensuring timely resource availability.

• Undertaking cost analysis for repair and alteration done by customer in project work.

• Evaluating completed work and arranging payments

• Ensure quality of structure, works as per drawing and specifications & ensure no rework

• Analyzing outcomes and writing detailed progress reports.

• Preparation of Daily, Weekly and Monthly reports and submitting it to the Management

Responsibilities

- Manage and analyze yield for new product off-loads and qualifications.

- Collaborate with customers on product correlation, qualification runs, design and optimization of test process and test program improvements.

- Develop and maintain test programs / hardware for Wafer Sort and Final Test.

- Prepare engineering reports and conduct technical reviews with customers.

- Develop and transfer test solutions for Wafer Sort and Final Test to production.

- Provide engineering support to Test Operations in productivity improvement

- Participate in manufacturing activities to enhance test processes and flow specifications, minimizing downtime and optimizing productivity.

Requirements

- Degree in Electronics Engineering or a related technical field.

- Minimum 2 years working experience in similar capacity preferred, fresh graduates are also welcome to apply.

- Knowledge of programming languages is an advantage.

- Experience in product testing and software / hardware debugging is beneficial.

- Possess project management, analytical, and problem-solving skills.

- Positive attitude with excellent communication and interpersonal skills.

Job Description:

• Preparation of construction schedule, monitoring of production and subcontractor's work progress.
• Able to handle with technical method statement.
• Resolving of technical matters and geotechnical issue.
• Submission of progress claims & variation order.
• Cost control measures & wastage control.
• Arrange work progress records.
• Preparation & submission of relevant documents to contractors.
• Able to attend to contractors' queries and comments.
• Attending of site progress meeting.
• Coordinate with Professional Engineer (PE) for PE Endorsement which includes test pile, trench stability, working platform, COS & etc.
• Prepare official letter to Main-contractor to record standby period, EOT claims, variation order, obstruction record
• Summarize diaphragm walls and bored pile panel record.

Requirements:

• Degree in Civil Engineering or relevant studies.
• Working experience in foundation works such as diaphragm walls and bored piles would be an advantage.
• Construction site working environment.
• Fresh Graduate are welcome to apply.

Position Overview:

Develop image/video processing algorithms for camera related applications.

Responsibilities:

1. Expand existing solutions to new levels of functionality, quality, and performance.
2. Assist other teams with algorithm implementation, testing and verification
3. Drive the productization of the hardware.
4. Algorithm documentation
5. Collaboration with external researchers.

Requirements:

Key Qualification:

1. BS/MS/PhD in Electrical Engineering, Computer Science or equivalent.
2. Knowledge of image processing algorithm development;
3. Good understanding of digital photography, image quality assessment.
3. Proficiency in C/C++
4. Demonstrate great teamwork, outstanding communication skills, and willingness to learn.

Advantageous:

1. Farmiliar with image and color processing techniques, including HDR, AWB, color correction, noise reduction, IR removal/suppression and CFA demosaicing, etc.
2. Proficinecy in developing, implementing and deploying image processing algorithms for ISPs, or CMOS image sensors
3. Strong mathematics background and track record of independent algorithm research.

Job Description

Bring more to life.

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Senior System Engineer, R&D is responsible for designing, building, and testing complex or large-scale, systems, ensuring that the components of the system are integrated and function. The incumbent determines the overall structure of the system, organizes the interaction between components, and evaluates the influence of the environment.

This position is part of the SCIEX Research and Development organization and will be located in Singapore. We empower our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support.

In this role, you will have the opportunity to:

• Define system architecture to provide desired functionality in product based on User Needs and regional Regulatory Standards. Thereafter generate the system requirements specification (SRS) based on the architectural decisions and technology choices made.
• Work with engineering disciplines to decompose System/Subsystem Requirements Specifications (SRS/SSRS) and allocate to subsystems. Thereafter, lead/oversee the development of SSRS working jointly with the Subsystem Technical Leads to ensure that the content is developed by the appropriate subject matter experts to achieve performance, functionality and reliability.
• Ensure that SCIEX Systems Engineering Processes are adhered to as per internal documents.
• Perform, lead/or participate in feasibility study, technical design reviews and FMEA in projects where necessary and ensure the mitigations are in place for potential risks. Identify gaps in design proposals, technical capabilities / techniques, and supports the development of strategies to overcome them through DFM & DFS practices.
• Provide technical support and investigation to field escalation and drive design improvements.

The essential requirements of the job include:

• M.Sc. / Bachelor degree in Electrical/Electronic/Mechanical or Systems Engineering.
• Minimum 5 years’ experience in New Product Development environment working with complex integrated systems
• Good knowledge with precision injection and fluidic control, Injections Electrokinetic and / or Electrospray ionization will be an advantage.
• DFSS knowledge and experience is preferred.

Travel Requirements:

• The position requires traveling to company locations and customer sites in US, Canada, Europe, Japan, and China. The successful candidate should be prepared to travel up to 20% of the time.

It would be a plus if you also possess previous experience in:

• Technologies such as electrophoresis sodium dodecyl sulfate (CE-SDS), ribonucleic acid (RNA) analysis and / or glycan characterization analysis.
• Capillary isoelectric focusing (cIEF) and imaged capillary isoelectric focusing (icIEF).

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

Responsibilities:

Responsible for design, development, commissioning and maintenance of inhouse Ship Management System (SMS), which includes:

• Perform system and architecture design of Ship Management System (SMS).
• Perform system integration for SMS with third party systems.
• Perform, coordinate, manage and support of Factory Acceptance Test (FAT), Set to work (STW) and Harbour Acceptance Test (HAT).
• Perform software configuration management and technical documentation.
• Perform hardware / software maintenance and troubleshooting.
• Liaise with customers, project manager and other engineering trades.
• Ensure operationality and functionality of SMS during the maintenance period of the vessel life cycle.
• Maintain close working relationships with customer, subcontractors, and suppliers.

Knowledge and Skills:

• Knowledge in PLC programming and SCADA software.
• Knowledge in control & instrumentation, and control system design.
• Knowledge in computer administration, cybersecurity and networking concepts.
• Knowledge of standard Communication protocols like Modbus RTU/TCP, Profibus, RS422, RS485, NMEA, CANbus J1939.
• Knowledge in Python, JSON, Restful, Machine Learning and Data Analytics experience will be an advantage.
• Knowledge of international codes, Marine Classification/Statutory Rules and Regulations will be an advantage.
• Experience in Site Testing and commissioning will be an advantage.

Requirements:

• Degree in Engineering in Electrical / Electronics / Computer, those with other engineering experiences are also welcome.
• At least 5 years experiences with system architecture design, system maintenance, and/or IT/Networking
• Ability to work independently under pressure, as well as able to lead a small team
• Possess good communication skills to communicate with suppliers and customers at all levels
• Possess good analytical skills and good problem-solving & troubleshooting skills

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

Job Description:

• Manage the development of Unmanned Ground Vehicles (UGVs) by researching and recommending ways to improve their performance, working with technical experts.
• Manage cross-functional team members and coordinate system integration, assembly, testing, and qualification of UGVs
• Conduct and coordinate structured testing of UGVs to validate system and subsystem performance.
• Work with external vendors and internal teams to align design requirements and ensure smooth collaboration.
• Support business development activities by synthesising requirements, defining specifications, plan, drive and track the solution process for the team.
• Ensure that all necessary documentation (designs, system requirements, production details) is organized for manufacturing and production.
• Conduct market research to understand new trends in robotics and unmanned systems technology.

Requirements:

• Degree in Mechatronics, Robotics, Electrical/Electronics, Mechanical Engineering, or similar fields.
• 2-3 years of working experience in project management or product development in fields of robotics or equivalent.
• Experience in systems design, system integration, and team management.
• Good communication and management skills to handle both internal and external stakeholders.
• Ability to handle multiple projects and meet deadlines.
• Knowledge of robotics and unmanned systems.
• Hands-on approach when needed, with the ability to collaborate in a dynamic team environment.
• Experience building and testing robotics/control systems would be advantageous.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

At Asia MatteLab, we’re on a mission to empower researchers with the tools they need for groundbreaking discoveries. We connect the world’s best scientific equipment with researchers across Singapore and APAC. Now, we’re looking for a passionate and driven Sales Engineer to join our growing team and make an impact!

Why You’ll Love This Role:

• Hands-On Experience: You’ll get to dive deep into the world of cutting-edge lab equipment and scientific tools.
• Growth Opportunities: Start as a Sales Engineer, and with your performance, you could be leading your own sales team in no time. And regional role is available.
• Flexible Schedule: We believe in work-life balance—own your time as long as you hit your goals.
• Exciting Fieldwork: Meet new people, visit different labs, and build lasting relationships with researchers across the region.

What You’ll Do:

• Be the Solutions Expert: Understand and present our lab equipment, helping researchers find the right solutions to advance their work.
• Meet & Build Relationships: Spend most of your time out in the field, meeting with researchers and building strong, lasting connections.
• Drive Sales Growth: Create smart strategies to introduce our products to new clients, expand our market reach, and exceed sales targets.
• Collaborate & Support: Work closely with our suppliers and customers, ensuring you’re the go-to person for any questions or opportunities.
• Lead the Charge: As you grow, you’ll have the chance to take on leadership responsibilities, potentially managing your own team.

Who You Are:

• A People Person: You love connecting with new people and building relationships that last.
• A Go-Getter: You’re driven, proactive, and always looking for the next opportunity to grow.
• A Problem Solver: You enjoy understanding client needs and providing solutions that truly make a difference.
• An Independent Worker: You thrive in an environment where you can manage your own schedule and take ownership of your work.
• A Quick Learner: You’re excited about learning new technologies and products and sharing that knowledge with others.

Qualifications:

• Diploma or Degree in Materials Science, Biotechnology, Life Sciences, Chemistry, Engineering, or related fields.
• 2+ years of experience in laboratory analytical equipment sales
• Strong communication skills and the ability to build rapport with clients.
• A passion for helping researchers achieve their goals through the right tools.

What’s In It For You:

• Competitive Salary: Your hard work will be rewarded with a great compensation package.
• Clear Career Path: Grow into a leadership role as the company expands.
• Training & Travel: Learn continuously through training programs and travel opportunities to meet clients and partners.
• A Dynamic Work Environment: Enjoy a vibrant, fast-paced, five-day workweek with a fun and supportive team.

Ready to Be the Driving Force Behind Scientific Progress?

If you’re ready to take on an exciting role where you’ll learn, grow, and make a real impact, we want to hear from you! Send your resume and expected salary to [email protected]. Only shortlisted candidates will be contacted, but don’t miss out—this could be the start of an amazing journey!

We are seeking a talented and motivated Research Engineer to join our team focused on developing cutting-edge AI models for vision inspection. This role involves leveraging state-of-the-art computer vision and machine learning techniques to solve complex manufacturing inspection challenges.

Responsibilities:

-Design, develop, and optimize AI models for image-based vision inspection tasks.

-Implement and fine-tune state-of-the-art models such as YOLO, Yolact, DeepLabV3, Vision Transformers, and others.

-Develop and maintain Python-based pipelines for data preprocessing, model training, and evaluation.

-Research and implement innovative algorithms to improve model accuracy and efficiency.

-Collaborate with cross-functional teams to understand project requirements and deliver high-quality integrated solutions.

-Document research findings, experimental results, and software implementations.

-Stay updated with the latest advancements in AI and computer vision technologies.

Job Requirements:

-Bachelor's or Master's degree in Computer Science, Electrical Engineering, or a related field.

-At least 3 years of experience

-Strong proficiency in Python programming.

-Expertise in deep learning frameworks like PyTorch (mandatory) and TensorFlow (preferred).

-Hands-on experience with computer vision models, including YOLO, Yolact, DeepLabV3, Vision Transformers, etc.

-Familiarity with image processing techniques and libraries such as OpenCV.

-Strong problem-solving and analytical skills.

-Strong communication and excellent writing skills

-Have a strong work ethic, and able to work on own initiative.

-Team player, communicate efficiently, be flexible and details oriented.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

• Responsible for 3D product design and its requirements

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions

• Create proof of concepts

• Generate engineering drawing with proper GD&T and Tolerance Stack up

• Define test requirements needed for all the designed products

• Perform Patent search for possible design infringement

• Drive Projects with tight timeline

• Any other duties as and when assigned

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/Bachelor Degree in Mechanical / Industrial Engineering

• 2-3 years of relevant experience

• Good exposure in Plastic Injection molded parts design

• Knowledge of product design, engineering plastics behavior, product certification

• Knowledge of CAE simulation will be an added advantage

• Competent in Engineering calculations

• Hands on 3D CAD & CAE experience

• Good problem-solving skills with strong technical acumen

• Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Responsibilities and Duties:

1. Oversee daily sales operations for semiconductor manufacturing equipment, such as CMP tools, within the assigned sales territory to ensure achievement of sales targets set by the management team.
2. Guide and manage the sales representatives’ activities to maximize market opportunities and maintain competitiveness.
3. Regularly prepare forecasts and sales targets, monitoring team performance against these benchmarks. Provide strategic direction to help the team meet or exceed these goals.
4. Lead new marketing initiatives and collaborate with EC to implement promotional efforts for semiconductor manufacturing equipment products.
5. Design, develop, and execute localized sales and marketing programs tailored to the needs of the sales territory.
6. Maintain clear communication with the sales team to understand customer needs and provide sales support as required.
7. Collaborate with EC to establish appropriate industry pricing levels.
8. Utilize the SAP ERP system to track and manage the progress of quotations, purchase orders, deliveries, and customer invoicing.
9. Partner with EC to identify and secure new accounts and contracts, leveraging the local team to support growth in new product offerings.
10. Build and maintain strong customer relationships to ensure trust and satisfaction.
11. Perform any additional responsibilities as assigned by the management team.

Qualifications and Requirements:

Experience:

• A minimum of 5 years of sales experience, preferably within the semiconductor industry and in a Japanese company setting.

Knowledge:

1. Familiarity with commercial and shipping documents, including Incoterms.
2. Understanding of semiconductor manufacturing equipment, such as CMP tools.

Skills:

• Strong interpersonal and communication skills, complemented by a friendly and professional demeanor.
• Demonstrated ability in customer service, negotiation, and delivering impactful presentations.
• Capability to work effectively both independently and collaboratively within a team environment.

Other Requirements:

• Willingness to travel internationally for training and visits to customer locations across the region as needed.
• Candidates who own a vehicle will receive a vehicle allowance.

EA License Number: 22C1267

EA Personnel: R22110252

Job Description

• Maintain mechanical equipment, systems and processes to meet requirements, applying knowledge of engineering principles
• Provide technical support to optimise process capability of production line, ensuring smooth and efficient output.
• Assist in Product samples making prior to mass production based on customers specification
• Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
• Hands-on applications are expected

Job Requirements

• Higher Nitec or Diploma in Mechanical Engineering
• Must be able to understand Mechanical Drawings
• Able to design with SolidWorks or similar
• Able to communicate with Chinese customers and English-speaking vendors.
• A team player

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628