Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Overview:

Electrical / PLC Engineer to design, implement, and maintain electrical and automation control systems. The ideal candidate will have strong electrical and programming skills and extensive experience with industrial automation systems.

Key Responsibilities:

Design, develop, and implement PLC programs for automated manufacturing systems using platforms such as Allen-Bradley, Siemens, or Beckhoff. Other platforms may also be utilized in the course of your work.

Create and maintain HMI (Human Machine Interface) applications, SCADA systems and MES as required.

Troubleshoot complex control system issues and provide timely solutions to minimize production downtime.

Develop and maintain documentation for PLC programs, including logic flowcharts and technical specifications.

Perform risk assessments and ensure compliance with safety regulations.

Perform calculations, sizing and deployment of LV electrical and control systems.

Inspection, testing and troubleshooting of existing and new systems.

Qualifications:

Bachelor's degree (or Diploma) in Electrical Engineering, Computer Engineering, or related field. Fresh graduates are welcome to apply, experience in Semi-conductor field is an added bonus.

Experience programming PLCs in an industrial environment preferred.

Proficient in ladder logic programming and structured text.

Experience with major PLC platforms. (Allen-Bradley, Siemens, TwinCAT, etc.)

Knowledge of industrial networks and communication protocols.(Ethernet/IP, Profibus, Modbus)

Experience with HMI/SCADA development.

Experience with MES integration and deployment.

Experience with electrical systems and industrial safety standards.

Strong problem-solving and analytical skills.

Strong communication skills.

Working Conditions:

Mix of office and factory floor environment

Will require travel to overseas sites including but not limited to, Singapore, Malaysia, China, India. Existing Visas not required, but is an added bonus.

☑ Basic $ 4500 - $ 5000 Days (Mon – Fri: 08:30am – 5.30pm)

☑ Office Centrally located, Island wide jobsite attended required

☑ Good Benefits + Career Growth

☑ Experience in Fire Protection Project is advantageous!!

Responsibilities:

• Conduct site inspections, gather data, and coordinate with the design team for drawings.
• Verify drawings before construction, addressing customer requirements.
• Coordinate with design team, customers, and subcontractors during construction.
• Inspect and ensure quality work from subcontractors; assist Project Manager in meeting project timelines and safety standards.
• Oversee testing, commissioning, customer training, and final inspections for as-built drawings.

Requirement

• Diploma / Degree in Mechanical Engineering or any related field.
• 1-3years of Project Management experience.
• Knowledge of ISO 9000 standards, problem-solving, and analytical skills.
• Proficient in English, computer skills, and experience with LTA projects preferred.

Interested applicants are welcome to apply online with updated resume to [email protected]

Only shortlisted candidate will be notified

Yvette Kam Soo Leng

Registration: R22107492

Responsibilities:

• Responsible for the design and selection of rotating equipment on EPC projects through the various engineering work phases (i.e. Feasibility / FEED studies and detailed engineering for Offshore, FPSO Projects)
• Plans and directs technical specifications/ standards
• Review all technical requirements incorporated in engineering deliverables.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment.
• Assists in placing and executing the orders. Review supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance. Being the focal point, liaises and coordinates with various stakeholders.
• Oversees the technical and administrative management of the project mechanical team and ensures quality/ schedule of deliverables from the team.
• Provides technical/ engineering support and advice for quality work at site.
• Resolves technical issues using expert knowledge and technical know-how that may arise during the execution of package engineering, fabrication and post delivery.
• Ensures business activities and decisions conform to the laws and regulations and demonstrates high standard of ethical behaviour.

Requirements:

• Possess Degree in Mechanical Engineering or equivalent
• At least 15 years of relevant work experience, preferably in the Marine Offshore/ Oil & Gas industries
• Conversant with design standards and International Industry Codes such as ASME, API etc.
• Conversant with specifications and requirements for mechanical rotating equipment such as process gas compressors, screw compressor packages, reciprocating compressors, gas turbines, Sea Water injection pumps and requirements of Industry Codes and Standards, Classification Society rules and all relevant regulatory.

Interested applicants are welcome to submit your resume to [email protected]

EA. R1107675

Agency no. 07C3676

We are looking for a skilled and motivated DevOps Engineer (Azure) to join our project on a 12 months extendable contract basis. You will get an oppourtunity to work on exciting AI projects.

The successful candidate will work on the development, deployment, and continuous improvement of our cloud infrastructure, leveraging Azure DevOps practices and tools. This role will focus on building scalable and reliable infrastructure solutions that support our business applications.

Key Responsibilities:

• Azure Cloud Infrastructure Management: Design, deploy, and manage scalable infrastructure solutions using Microsoft Azure.
• DevOps Automation: Implement automation using Azure DevOps pipelines to automate the build, test, and release processes.
• CI/CD Pipelines: Develop, maintain, and improve Continuous Integration/Continuous Deployment (CI/CD) pipelines for seamless application delivery.
• Cloud Resource Management: Work on Azure resources (e.g., virtual machines, databases, storage) and ensure the infrastructure is cost-effective, scalable, and secure.
• Monitoring & Optimization: Monitor system performance and application health to ensure high availability, identify bottlenecks, and implement optimization strategies.
• Collaboration & Support: Collaborate with software development teams, QA teams, and system architects to ensure alignment between development and operational goals.
• Incident Management: Troubleshoot and resolve issues related to the infrastructure and deployments. Perform root cause analysis to ensure issues are resolved efficiently.
• Security & Compliance: Ensure the infrastructure follows best practices for security, disaster recovery, and compliance with industry regulations.
• Documentation: Create and maintain technical documentation on infrastructure architecture, processes, and procedures for knowledge sharing and process improvement.

Key Requirements:

• Education: Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Experience:Proven experience working as a DevOps Engineer or in a similar infrastructure role.
  Hands-on experience with Azure Cloud Services (Azure Compute, Networking, Storage, Azure Resource Manager, etc.).
  Strong expertise in Azure DevOps services, including pipeline creation, release management, and configuration management.
  Experience in building and managing CI/CD pipelines using tools like Jenkins, Azure Pipelines, or GitLab CI.
  Knowledge of containerization technologies such as Docker, Kubernetes, and Azure Kubernetes Service (AKS).
  Familiarity with Infrastructure as Code (IaC) tools like Terraform or Azure ARM Templates.
  
• Skills:Strong scripting skills in languages such as PowerShell, Bash, or Python.
  Experience with version control systems (e.g., Git).
  Familiarity with cloud monitoring tools such as Azure Monitor, Log Analytics, and Application Insights.
  Understanding of networking and security principles within cloud environments.
  Strong problem-solving, troubleshooting, and analytical skills.
  Good communication skills and the ability to collaborate across teams.

Preferred Qualifications:

• Certifications in Microsoft Azure (e.g., Azure DevOps Engineer Expert or Azure Solutions Architect Expert).
• Experience with Agile methodologies and tools such as JIRA.
• Knowledge of microservices architecture and related deployment strategies.

Argyll Scott Consulting Pte Ltd

Responsibilities:

· Develop, test, and deploy Ansible playbooks to automate infrastructure provisioning, configuration management, and application deployment.

· Collaborate with development and operations teams to identify automation opportunities and implement efficient solutions.

· Maintain and improve existing Ansible playbooks and modules.

Qualifications:

· 3-5 years of hands-on experience with Ansible, with knowledge in Openshift and Red Hat Middleware is a plus.

· Strong understanding of containerization, virtualization, and cloud technologies.

· Proficiency in scripting languages (Python, Bash) and configuration management tools.

· Experience with Linux administration and networking.

· Excellent problem-solving and troubleshooting skills.

· Strong communication and interpersonal skills.

· Red Hat certifications (e.g., RHCSA, RHCE) are expected.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Job Description & Requirements

• To design, plan and test for Network Infrastructure Projects implementation
• To install, configure and troubleshoot network from Internet routers, Layer2 to core switches, wireless APs to wireless controllers, and firewalls
• To carry out onsite and remote technical troubleshooting support for network infrastructures
• To carry out extensive internal solution testing and research for network infrastructures, as per customer requirements
• To be responsible for project management of Network Infrastructures from design to delivery and commissioning

D-Synergy group welcomes you not for how you look, where you come from, or differences you may have.

We want you here for who you are. Diversity at the company helps us see a greater picture represented by different voices, helping us in contributing back to the society. So, feel free to express who you are, and be proud of your heritage and personal experience as you begin your journey with us!

Job Requirements:

• Candidates must have more than 3 years networking experience.
• Candidates must be a disciplined and responsible team player with the ability to work effectively across teams within our group and with customers from various industry verticals.
• Candidates must have strong working knowledge of Internet routers, L2/3 switches, enterprise Wi-Fi solutions and prevailing UTM brands of firewalls and End-Point Security solutions

About our client: Our client is an international engineering and project management consultancy specializing in infrastructure and environmental projects.

*Please note that this role will be contracted to support our client's project.

*Work Location: Tuas

About the role:

• Work as owner’s engineer to lead the electrical team in project implementation at site.
• Proactive attitude and solution-orientated personality with leadership mentality and for the electrical discipline, assisting project director in the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment.
• Good understanding of industrial MV/LV cabling installation and commissioning requirement.
• Experience in large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• Able to understand P&ID drawings and layout drawings.
• Possessing strong analytical capability to resolve technical issues proactively
• In-depth of understanding of electrical power automation for electrification of WtE project would be an added merit.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the project implemetation
• Familiar with SS638 requirements on electrical installations in Singapore.
• Multi-discipline coordination in the execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site technical meeting with contractors and client
• Strong communication capabilities to deliver concept and idea
• Join site inspection of contractors' works.
• Participation in FAT and SAT of electrical and DCS equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

About you:

• Degree holder in Electrical Engineering
• The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: R1325507

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg. No: R1325507

Key responsibilities:

• Review customers' regulatory requirements and conduct compliance review such as RoHS, REACH, Conflict Minerals, etc
• Work with Engineering to obtain BOM. Coordinate with SCM to gather regulatory declaration/ compliance letter from suppliers to ensure material used comply with regulatory requirements
• Review compliance verification on collected declarations and provide compliance letter to customers to ensure our products meets customer requirements.
• Gather compliance documentation on first buy / FA, review and file records.
• Perform updating on new compliances / changes, work with team on gathering declaration updates and filing records.
• Review and conduct regulatory documentation updating exercise every 2 years or upon customer's request.

Qualification and traits desired:

1. Minimum Diploma in Quality Management /Mechanical Engineering or equivalent
2. Possess Internal Quality Audit training certificate in ISO 13485 and 9001 will be advantageous
3. Minimum 2 years in Q, preferably with similar working experience in regulatory compliance.
4. Candidate must be proficient in Microsoft Office and preferably has performed Internal Quality Audit.
5. Excellent oral and written communication skills/good interpersonal skills

Other information:

• Working Hours : 8.15am to 5.30pm (Mon-Fri)
• Location : Changi North
• Company Bus : Pick up at Ang Mo Kio, Yishun, Hougang, Punggol, Pasir Ris, Bedok, Tampines MRT/Interchanges

Interested candidates are invited to apply online with an updated resume. Please indicate the below information in your resume:

• Education Background
• Work experience
• Current & Expected salary
• Reason(s) for leaving current/previous job
• Availability / Notice Period

Job Description:

• Review tender specifications / customers’ requirements and prepare process design.
• Obtain quotation from vendors, suppliers, and subcontractors based on the requirements.
• Interact closely with vendors to understand new technologies and effective implementation of customer applications using vendor’s information.
• Interact closely with customers on technical information and clarifications.
• Prepare cost effective costings.
• Prepare commercial & technical proposals with specifications for timely bid submissions.
• Generate / coordinate P&ID and General Arrangement drawings.
• Work with Business Development Manager to apply costing and process design strategies to increase probability of winning bids.
• Coordinate with Process / Mechanical / Electrical & Instrumentation Team for technical clarification support if required.
• Follow up with customers on submitted proposals and potential opportunities.
• Negotiate with vendors and customers if required.
• Upon award of projects, review and verify completeness of PO contract and compliance with agreed requirements.
• Communicate and nurture relationships with customers to drive more opportunities.

Requirements:

• Degree in Environmental or Chemical Engineering.
• Knowledge or previous experience in water treatment process and municipal wastewater treatment such as Filtration, UF, RO, EDI, SRU, MBBR, MBR etc.
• Knowledge and experience on pumps, motors, valves, piping, mechanical and electrical components for oil and gas industry is added advantage.
• Minimum 5 years of relevant experiences.
• Strong verbal and written communication skills in English.
• Ability to prioritize multiple tasks and work on own initiative.
• Willing to travel for site visits, sales presentation to customers and technical clarification meeting occasionally.

Job Overview

We are seeking a dynamic ICT Assessment Certified Solution Architect & Software Developer to lead the design, development, and implementation of robust ICT solutions. This role requires strong technical expertise, excellent problem-solving skills, and the ability to align ICT strategies with business goals.

Key Responsibilities

Solution Architecture:

• Analyze business requirements and translate them into effective ICT solutions.
• Design scalable, secure, and high-performing architecture using industry best practices.
• Evaluate and integrate third-party tools and platforms to enhance system functionality.
• Prepare technical documentation, including system architecture diagrams, integration flows, and solution blueprints.

Software Development:

• Lead the development of enterprise-grade applications, ensuring adherence to coding standards and best practices.
• Collaborate with cross-functional teams to deliver high-quality software solutions.
• Implement and maintain microservices, APIs, and integrations.
• Perform code reviews, unit testing, and continuous integration to ensure software reliability.

ICT Assessment and Certification Compliance:

• Conduct ICT assessments to evaluate and certify solutions for compliance with regulatory and organizational standards.
• Provide recommendations to address gaps identified during assessments.

Stakeholder Engagement:

• Work closely with stakeholders to understand business challenges and propose innovative solutions.
• Present architectural strategies and solutions to technical and non-technical audiences.

Performance Monitoring and Optimization:

• Monitor system performance, troubleshoot issues, and implement enhancements.
• Optimize ICT solutions to improve efficiency, reliability, and scalability.

Qualifications and Skills

Education:

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.

Certifications (Mandatory):

• ICT Assessment Certification.

Technical Skills:

• Strong experience with software development in languages such as Java, Python, C#, or JavaScript.
• Proficiency in designing and implementing cloud-based solutions (AWS, Azure, or Google Cloud).
• Deep understanding of system integration, microservices architecture, and API development.
• Experience with database technologies (SQL and NoSQL).
• Familiarity with DevOps practices, CI/CD pipelines, and containerization (Docker, Kubernetes).

Soft Skills:

• Excellent analytical and problem-solving abilities.
• Strong communication and interpersonal skills.
• Ability to manage multiple projects and meet tight deadlines.
• Collaborative mindset with the ability to lead and mentor teams.

Preferred Qualifications:

• Additional certifications in cloud technologies (e.g., AWS Certified Solutions Architect, Azure Architect Expert).
• Experience in conducting security assessments and implementing security best practices.
• Knowledge of agile methodologies and project management tools.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the Tech Aalto Privacy Policy, a copy of which is published at Tech Aalto’s website (https://www.techaalto.com/privacy/)

Confidentiality is assured, and only shortlisted candidates will be notified for interviews

Job Descriptions:

1. Complete in-depth special data analysis and insight based on business requirements, establish service growth models, data dashboards, analysis models, and indicator systems based on scenarios, and check and attribute abnormal data changes.

2. Disassemble and define complex problems, and propose effective strategies or solutions based on data mining and statistical modeling. Analyzes and models massive user behavior data, such as feature processing, labeling, modeling, effect evaluation, and model optimization.

3. Based on the in-depth understanding of user groups, media advertising slots, advertisers, platforms, and ecosystems, define scientific index systems and exploratory data analysis to accurately reflect the current business situation and quickly identify potential improvement opportunities in each business and technical direction.

4. Work closely with collaborative teams to design and implement scientific and reasonable AB experiments or observational research, guide scientific decision-making and iterative closed-loop, and promote the implementation and continuous optimization of data analysis conclusions.

5. Be responsible for big data governance, data access, data asset, and data quality maintenance, and maintenance of bottom-layer platforms and upper-layer data applications. Be able to handle routine maintenance, fault locating, and troubleshooting of various big data-related systems and data products. Ensure the normal and stable running of the system and services.

Job Requirements:

• Master's degree or above in computer/statistics/mathematics/operations research (doctoral degree is preferred), more than 3 years of relevant experience in user growth/user product analysis/business analysis is preferred.

• Have theoretical knowledge foundation and practical experience in statistical analysis, machine learning, and data mining, including probability statistics, data mining, and machine learning algorithms (classification, clustering, and time sequence).

• Have a basic command of Linux and network basics. Have a good command of the distributed parallel computing framework, including Hadoop, Hive, Spark, streaming computing, and real-time computing technologies.

• Have a good command of basic SQL syntax and be familiar with database programming languages such as HiveSql, SparkSql, Oracle, MySQL, and postgresql. Rich experience in data analysis, mining, cleaning and modeling;

• Excellent ability to write business analysis reports, and keen to find and analyze hidden problems in a timely manner. Good at communication, willing to cooperate, keen on new technologies, good at summing up and sharing, like hands-on practice.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries

A Process Engineer specializing in powder coating oversees and optimizes the powder coating process, ensuring high-quality finishes and efficient, cost-effective production.

Work Location: Woodlands

Working hours: 830 - 530 (Mon to Fri)

Job Responsiblities

1. Process Design and Optimization Design and develop powder coating processes to improve efficiency, product quality, and cost-effectiveness. Optimize powder coating application parameters (e.g., thickness, adhesion, curing time) to ensure consistent, high-quality finishes. Implement best practices for color changes, coating uniformity, and waste reduction.

2. Quality Control and Compliance Set up quality control checks to monitor coating thickness, gloss levels, and durability. Conduct root cause analysis for defects such as orange peel, uneven coating, and contamination, implementing corrective actions. Ensure processes adhere to relevant standards (e.g., ASTM, ISO) and industry regulations on environmental safety and emissions.

3. Equipment Management and Maintenance Oversee the maintenance, calibration, and performance of powder coating equipment, such as spray guns, curing ovens, and booths. Work with vendors and maintenance teams to source and maintain equipment and ensure minimal downtime. Ensure that equipment settings are correctly adjusted for different product specifications and powder types.

4. Troubleshooting and Problem-Solving Diagnose and resolve issues such as coating defects, equipment malfunctions, or process inefficiencies. Develop contingency plans to minimize production disruptions. Collaborate with cross-functional teams (e.g., quality assurance, production, and maintenance) to address and resolve coating-related issues.

5. Process Documentation and Reporting Maintain detailed documentation of the powder coating processes, parameters, and changes. Create reports on process efficiency, quality metrics, and improvement initiatives. Develop standard operating procedures (SOPs) for powder coating applications and updates.

6. Continuous Improvement Initiatives Lead initiatives to improve process efficiency, reduce powder usage, and minimize waste. Utilize Lean, Six Sigma, and other continuous improvement methodologies to identify and address process bottlenecks. Conduct regular process audits and implement action plans to achieve ongoing improvements.

7. Safety and Environmental Compliance Ensure powder coating operations comply with environmental regulations, such as VOC emissions and waste disposal. Implement safety protocols to prevent hazards like dust explosions and chemical exposure. Train team members on proper handling and usage of powder coating materials and equipment.

8. Project Management and Coordination Manage powder coating projects, such as new product lines, equipment installations, or process upgrades. Coordinate with departments such as R&D, production, and quality to align process capabilities with business needs. Develop project timelines, resource plans, and budgets to ensure project objectives are met.

Requirements

- Bachelor’s degree in Chemical Engineering, Mechanical Engineering, or Industrial Engineering, or related field.

- Minimum of 2-5 years in powder coating or a similar surface finishing process.

- Familiarity with powder coating equipment and materials, process control, and quality standards.

Sophia Lu

R1100200

06C2812

Company Profile

M3’s client is an established company with many years of experience in the spray painting and powder coating services in Singapore. Looking to expand a new line production line for Sheet Metal.

Company Location

Woodlands

Working Hours

Mon – Fri: 830am – 530pm

5 day work week

Job Responsibilities

• Develop and optimize sheet metal manufacturing processes such as cutting, bending, stamping, punching, forming, welding, and assembling.
• Select appropriate tools, machinery, and materials for production.
• Create and refine process documentation, including process flowcharts, work instructions, and standard operating procedures (SOPs).

Job Requirements

• Technical Knowledge: Expertise in sheet metal materials, properties, and forming techniques.
• CAD/CAM Proficiency: Familiarity with software like SolidWorks, AutoCAD, or similar for design and simulation.
• Able to interpret engineering 2d Drawings.

Sophia Lu

R1100200

Senior Recruiter

This role involves supporting global infrastructure, serving as a technical escalation point, and collaborating with partners and vendors. If you have a strong background in cloud computing and Azure technologies, this opportunity could be the perfect fit for you!

Key Responsibilities:

• Support the global IT infrastructure by acting as a technical escalation point and collaborating with external partners and vendors.
• Play a crucial role in major projects, including network and cloud migrations.
• Ensure optimal system performance, coordinating with external service providers as needed.
• Monitor and maintain the security, integrity, and performance of core systems and backup services.
• Generate compliance reports and implement remediation actions.
• Work closely with the Architecture & Security teams, contributing to solution designs.
• Assist in planning and delivering infrastructure improvements as part of a collaborative team.
• Partner with vendors and outsourcing providers to enhance and optimize service delivery.

Job Requirements:

• Strong expertise in cloud computing and Azure technologies, including Azure IaaS, SaaS, and PaaS.
• Proficient in the Microsoft Stack, including Windows OS Family, Active Directory (hybrid), Exchange, Office, scripting, and endpoint management (Intune & SCCM).
• Experience in designing and implementing scalable, secure, and highly available cloud solutions.
• Ability to troubleshoot and resolve issues in Azure environments, hardware, software, network, and systems.
• Hands-on experience with IT projects, such as system upgrades, migrations, and backups.
• Excellent communication and teamwork skills.
• ITIL certification or equivalent experience.

Desirable Skills:

• Knowledge of infrastructure processes, including capacity management, patch management, and change management.
• Familiarity with LAN and WAN network technologies.
• Experience in managing outsourced suppliers.
• Understanding of IT security standards such as ISO27001, CE+, or PCI-DSS.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

We are looking for a skilled Digital Engineer/BIM Lead to join our team. As a Digital Engineer, you will be responsible for the production of models and drawings using Autodesk Revit, Civil3D, and/or Bentley Open Suite software. You will also assist in the development and implementation of BIM execution plans, set up, configure, and manage the project BIM platforms, and support BIM implementation, authoring, and coordination in all phases of a project. Additionally, you will be responsible for the following:

• Assisting the project in implementing BIM processes & workflows for various projects.
• Assisting in maintaining BIM documents such as BEP, Project BIM standards, MIDP, TIDP, Model tree, LOD table, etc.
• Managing BIM production and a pool of BIM modellers, BIM collaboration & coordination, issue management, as-built verification, BIM handover & other BIM processes.
• Preparing and updating federated models for coordination, performing clash detection & reviewing the model, creating & assigning issues, distributing the list to the relevant teams, setting up BIM coordination meetings, following up & ensuring timely resolution of the issues.
• Coordinating with the BIM modeling team on production of 3D models & 2D drawings from BIM (or directly) for C&S/M&E works.
• Producing BIM deliverables such as 4D, 5D, 6D.
• Assisting to develop the Company-wide & Project-specific templates & object libraries.
• Managing the BIM deliverables schedule & ensuring timely delivery of good quality models & drawings.
• Performing QA QC on models & drawings as per project/client standards.
• Maintaining records of all issued & received models/drawings, Clash Reports, RFIs, etc. in accordance with the company’s ISO standards and procedures. Performing regular backups and housekeeping work in the CDE.
• Assisting in/attending trainings. Continuing to learn new methods to improve efficiency & apply them in projects.
• Maintaining a high level of competency of software through continued use, training, and assistance on projects for the implementation of new BIM software.
• Supporting Project Team for Presentations with BIM-Model and related activities.
• Working under the supervision of the BIM Manager and performing work tasks assigned.
• Providing on-site reporting and bi-weekly BIM/VDC reports.
• Implement BIM processes and workflows for various projects under the supervision of the BIM Manager
• Maintain BIM documents such as BEP, Project BIM standards, MIDP, TIDP, Model tree, LOD table, etc.
• Manage BIM production, collaboration, coordination, issue management, as-built verification, handover, and other BIM processes
• Assist BIM modeling team in producing 3D models and 2D drawings for C&S/M&E works

Requirements and Qualifications:

• A bachelor's degree in architecture, Engineering, Construction Management or related field.
• A minimum of 2 years of experience in BIM coordination in the construction industry.
• Experience with BIM software including Autodesk Revit, Civil3D, and/or Bentley Open Suite software.
• Strong organizational, communication, and problem-solving skills.
• Excellent knowledge of BIM execution plans, BIM standards, and construction documentation.
• Familiarity with clash detection and resolution techniques.
• Strong attention to detail and ability to multi-task.
• Familiarity with ISO standards and procedures.
• Strong knowledge of 3D digital modeling and 2D drawing production.
• Knowledge of 4D, 5D, 6D BIM deliverables.
• Ability to communicate complex technical concepts in 3D digital models.
• Familiarity with PFD, P&ID drawings of the BoP systems and modeling the Piping and Mechanical items into the BIM platform using Revit 2020.
• For Singaporean citizen or PR only.

We offer competitive compensation, benefits, and opportunities for growth and advancement. If you meet the qualifications and requirements, please submit your resume and cover letter for consideration at [email protected].

*Join Our Team: Outdoor Service Engineer*

Are you a tech-savvy problem solver with a passion for the great outdoors? AV Media Pte Ltd is seeking an enthusiastic and skilled Outdoor Service Engineer to join our dynamic team.

*About Us:*

AV Media Pte Ltd is a leading provider of audiovisual solutions, serving prestigious clients including MOE schools and various government agencies. We pride ourselves on delivering top-notch services and innovative solutions.

*Position: Outdoor Service Engineer*

*Key Responsibilities:*

- Provide maintenance and support for audiovisual equipment at client locations.

- Troubleshoot and resolve technical issues efficiently and effectively.

- Ensure customer satisfaction by delivering excellent service.

- Collaborate with the team to improve service quality.

*Requirements:*

- Technical diploma or equivalent in a related field.

- Experience in audiovisual equipment maintenance and troubleshooting.

- Strong problem-solving skills and attention to detail.

- Excellent communication and interpersonal skills.

- Ability to work independently and manage time effectively.

- Valid driver's license.

*Benefits:*

- 5-day work week.

- Company-provided vehicle for service visits.

- Comprehensive training program.

- Attractive salary and benefits package.

- Opportunity to work with prestigious clients and advance your career.

*How to Apply:*

If you’re ready to take on an exciting challenge and be part of a forward-thinking company, send your resume and a cover letter to [email protected] with the subject line "Application for Outdoor Service Engineer."

Join us in making a difference through cutting-edge audiovisual solutions!

Job Description

• Industry/ Organization Type: Manufacturer - RFID security systems and wireless
• Position Title: Systems & Network Engineer/ Network Engineer
• Working Location: Ang Mo Kio
• Working Hours: 5 days (Monday to Friday – 8.30am to 6:15pm)
• Salary Package: Up to $5500 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Collaborate with other domain specialists to design technical solutions that meet business requirements.
• Develop solution designs, project documentation, and material bills based on customer needs.
• Conduct evaluations, Proof of Concept trials, and liaise with vendors to understand product offerings.
• Support project implementation including system administration, network support, and training in Windows/Linux environments.
• Perform network troubleshooting, upgrades, and ensure compliance with cybersecurity standards.
• Manage ad hoc technical tasks and document system specifications.
• Stay updated on networking trends and pursue necessary vendor certifications.
• Any other assigned duties.

APPLY NOW!!!

• Bachelor’s degree or Diploma in Computer Science or a related field.
• 3-5 years of experience in network design and project implementation.
• Proficiency in Microsoft Windows and Linux environments.
• Strong knowledge of cybersecurity principles, network security, TCP/IP, and risk management.
• Experience in virtualization, as well as on-premise, hybrid, and cloud networking.
• Effective communication skills and the ability to work independently.
• Hands-on experience with server and network hardware setups and software configurations.
• Knowledge of CCTV, audio/video systems, and IP communication technologies.
• Professional certifications (e.g., CCNP, CISSP) preferable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #72035 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities

• Study of construction drawings details and coordinate with the consultants and sub-contractors to resolve any technical/site issues.
• Ensure that works on site are carried out according to specications/drawings.
• Produce M&E coordination drawings and check drawings discrepancies.
• Carry out project planning, design, materials requisition, cost control, project supervision and documentation.
• Ensure quality of works is achieved and safety regulations are complied with.
• Conduct M&E meetings

Requirements

• Diploma/Degree in Mechanical / Electrical Engineering or equivalent.
• At least 3 years' working experience in the Building / Construction / Interior Design Industry.
• Proficient in MS Office applications
• AUTOCAD skill will be added advantage
• Able to converse with English and Chinese speaking clients, contractors and vendors to complete projects effectively.
• Strong Organizational, Project Management, and problem-solving skills.
• Capable of working independently with minimal supervision.
• Local working experience needed

Your resume must include the following information: -

1. Current and expected salary
2. Reasons for leaving
3. Date of availability

Other information

• Working hours: Monday to Friday, 9am to 6pm
• saturday 9am to 1pm
• Require to be reachable day and night
• Salary: $3,500 to $8,500

For interested parties, please send your resume to:

[email protected]

HAZARI ENGINEERING & RENOVATION PTE LTD

Whatsapp: +6580376525