Process Engineer (Lithography) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in Lithography process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Knowledge in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Roles & Responsibilities:

· Responsible for analysing wastewater samples using various analytical lab methods

· Perform lab equipment maintenance, troubleshooting, and calibration

· Develop methods for wastewater treatment according to customer’s requirements

· Develop test plans, drive testing execution, analyze, document results, and report to respective PIC.

· Lead and guide technician(s) priority, workload, technical understanding

· Learn critical market drivers/needs and understand product applications

· Manage projects or sub-projects including timelines and budgets and work in an interdisciplinary team

· Consolidate and analyse data for process quality control and reporting purposes, ensure compliance with relevant standards and regulatory requirements.

· Facilitate laboratory equipment, accessories, and consumable purchase and inventory management

· Developing and maintaining an effective laboratory workforce by constantly improving work methods

Qualifications/Experiences required:

· Degree in Chemistry, environmental, chemical engineering-related engineering fields.

· Able to communicate with various levels of people.

· Pleasant personality; mature, independent, and resourceful.

· Analytical with good writing, communication, and problem-solving skills

· Self-motivated, team-oriented, and flexible individual must possess the initiative and ability to take on numerous challenging tasks, and new projects, and meet high standards and deadlines.

Job Scope:

• Design, develop, and test electrical systems and components
• Create electrical schematics, layouts, and wiring diagrams
• Ensure compliance with standards, codes, and safety regulations
• Select components and perform system simulations
• Troubleshoot and resolve electrical system issues
• Collaborate with cross-functional teams for integrated solutions
• Oversee installation, testing, and commissioning
• Provide technical support to production and maintenance teams
• Prepare and maintain project documentation and reports
• Implement energy-efficient and sustainable electrical solutions
• Research and apply new technologies to enhance system performance

Requirements

• Diploma/Degree in Electrical Engineering with 2-3 years of experience
• Experience in designing and developing customized automation machines
• Proficient in writing PLC programs (e.g., Omron, Allen Bradley, Siemens, Keyence)
• Familiar with PC-based programming (Visual Basic, C++) for machine controls
• Hands-on experience in guiding technicians with schematics and electrical layouts
• Occasional travel required

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Role

• Install, configure, and administer VMware ESX/ESXi servers (5.x, 6.x, and 7.x).

• Manage and maintain vCenter Servers (4.x, 5.x, 6.x, and 7.x).

• Configure, administer, and troubleshoot VMware vSAN 6.7 and newer versions.

• Perform capacity planning, resource allocation, and optimization for VMware environments.

• Monitor and resolve performance issues within VMware infrastructures.

• Perform firmware and software upgrades on VMware ESX/ESXi hosts.

• Install, configure, and maintain Windows Server operating systems (2008, 2008 R2, 2012, 2012 R2, 2016, and 2019).

• Manage Active Directory, DNS, DHCP, Group Policy, and other core Windows Server functionalities.

• Troubleshoot hardware and software issues in physical and virtualized Windows environments.

• Plan and execute patching, updates, and upgrades for Windows Servers.

• Implement best practices for data backup, restoration, and disaster recovery planning in virtualized environments.

• Work closely with security teams to ensure compliance with corporate security policies.

• Maintain documentation for infrastructure designs, configurations, and procedures.

• Assist with IT infrastructure projects and provide technical support for escalated issues.

• Monitor system health and ensure high availability of all services.

Skills and Qualifications:

• Bachelor’s degree in Computer Science, Information Technology, or related field (or equivalent experience).

• 5+ years of experience in VMware and Windows Server administration.

• Proficiency in VMware tools, including vSphere Client and VMware vSAN.

• Strong knowledge of Windows Server installation, configuration, and administration.

• Experience with virtual network configuration and troubleshooting.

• Familiarity with storage technologies and SAN/NAS integration.

• Excellent problem-solving and communication skills.

• Certification in VMware (e.g., VCP-DCV) or Windows Server (e.g., MCSA, MCSE).

• Experience with scripting and automation (PowerShell, Bash, etc.).

• Exposure to hybrid cloud environments and integrations with VMware on AWS/Azure.

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• Preferably with minimum 1 year experience in Data Center Facilities Management & Operations environment and service delivery.
• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location : 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Position Summary:

Mainly supporting security aspect like firewall checkpoint, security appliances - configuration, troubleshooting, capacity planning. Supporting current operation and deployment of resiliency project.

Roles and Responsibilities:

• Directly reporting to Security Senior Manager
• Assist Architect team on new infrastructure design, implementation, and management of network solutions that form the core infrastructure, ensuring seamless integration across different platforms. This includes procurement of necessary equipment.
• To provide comprehensive product knowledge on the data technology required to deliver, support the networks infrastructure.
• Collaborate with the team to identify network and system needs, monitor performance metrics, troubleshoot, and resolve network-related issues, and implement improvements.
• Deliver project management for network activities encompassing upgrades, deployments, and migrations. Provide technical guidance and user support as required.
• Develop, maintain, and update documentation covering the network environment and operational procedures.
• Generate reports and detailed documentation outlining findings, implemented solutions, and recommendations for further enhancements.
• Oversee network environment to maximize performance, scalability, and minimize downtime.
• Closely coordinate and conform to Change Management policies, process, and procedures on any network changes.
• To implement approved changes, troubleshoot to identify root causes and implement effective solutions.
• Experience on Automating daily network tasks using scripting.
• Be available to provide on-call support as needed.

Qualification/ Requirements:

• Minimum Bachelor in Computer Engineering or equivalent
• Must equipped with CCNP or CCIE
• Network Infrastructure & Hardware: 5+ years experience managing large enterprise network with a strong focus on F5, Palo Alto, Cisco, and CheckPoint Technology.
• Network Devices: In-depth knowledge and proficiency with switches, firewalls, load balancers, routers, and ISE.
• Network Design & Troubleshooting: Expertise in designing, monitoring, and network & incident management (LAN, WAN, VPN).
• Experience with automation tools: Ansible, Python
• Experience with Deployment and automation, advantage to have experience building data center
• Proven track record of success in a fast-paced IT environment.
• Excellent communication and interpersonal skills, allowing you to effectively collaborate with both technical and non-technical stakeholders.
• Ability to work under pressure and delivery the project on time with minimum supervision.
• Certified and experienced with the mentioned technologies.
• 2 years contract

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting.
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.
• Follow up with clients and handover the project
• Good knowledge civil, Structure and M&E deoartment

Responsibilities:

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.
We are innovative, focused, and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.
As a Full Stack Developer, you will design, develop, and deploy robust, secure, and user-centric applications while leveraging the power of cloud technologies. You will work across the entire tech stack, ensuring our applications are scalable, efficient, and aligned with business goals.

Location:

Singapore

Key Responsibilities:

• Develop Full-Stack Applications: Design, build, and maintain responsive front-end interfaces and secure, scalable back-end services.
• Cloud Integration: Leverage cloud platforms (AWS, Azure, Google Cloud) to develop and deploy cloud-native solutions, ensuring optimal scalability and performance.
• Collaborate Across Teams: Work closely with product managers, designers, and DevOps engineers to deliver seamless user experiences.
• Optimize Performance: Ensure applications perform reliably under high usage, implementing best practices for scalability and security.
• Innovate: Stay ahead of industry trends and bring new ideas to enhance our offerings.

• 8+ years in full-stack development with expertise in front-end frameworks (React, Angular, or Vue.js) and back-end technologies (Node.js, Python, Go, etc.).
• Hands-on experience with cloud platforms such as AWS, Azure, or Google Cloud.
• Strong understanding of CI/CD pipelines and DevOps tools.
• Proficiency in building RESTful APIs and microservices architecture.
• Familiarity with containerization (Docker, Kubernetes) and serverless computing.
• Experience with both SQL and NoSQL databases.
• Excellent problem-solving and analytical abilities.
• Strong communication skills to work effectively with cross-functional teams.
• Self-motivated, team-oriented, and driven to innovate.
• A natural curiosity for new technologies and trends in cloud computing and software development.

We are a global leader in sports vision technology, powered by a team that believes in failing fast, learning faster, and winning as a team. At Rapsodo, you'll thrive in a culture driven by customer focus, achieving more with less, and redefining what's possible. If you are eager to work independently while contributing to a dynamic, innovative, and passionate team, we encourage you to submit your application.

Job Responsibilities:

·Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

·Conduct root cause analysis & implement pro-active measures

·Responsible for supporting operational systems satisfying contractual Service Level Agreement

·Perform and manage routine preventive maintenance and operational activities promptly and effectively

·Perform troubleshooting and fault rectification

·Provide up-to-date project documentation and reports

·Diagnose and rectify technical issues

·Perform standby duties if required

Job Requirements:

·Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

·Strong troubleshooting skills and analytical mind with problem-solving aptitude

· Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

·Pro-active, dynamic and with good analytical/conceptual thinking

·Able to work independently as well as in a team and good interpersonal skills

·Good Working knowledge with VPN, firewall appliances would be an advantage

·Good working knowledge with routers, switches would be an advantage

·Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

•Experience in hardening of OS, system and network equipment

•Experience in Patch Management

•Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

You may submit your resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

(EA Reg No: 20C0312)

Job Description:

• To be responsible for all the execution of Contracts progress.
• To monitor the installation progress as well as co-ordination with Clients, Consultants, Subcontractors to ensure efficient and timely delivery of assignment.
• To report and monitor of progress of project to Project Manager.
• To supervise and ensure works are in accordance to the contract drawings and specifications.
• To prepare method statement, shop drawings, installations / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.
• To coordinate with subcontractors and consultants on preparation and submission of shop drawings.
• To coordinate / prepare technical submissions with suppliers / subcontractors.
• To assist the Project Manager to negotiate / procure materials, equipment and labour in accordance to (or below) the allocated approved budget.
• To hold technical discussions with various stakeholders to resolve technical / site issues.
• To liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.
• To have experience in working at Data Center.
• Mechanical: Familiar with VAV / VRV / cooling tower / chillers / chilled water pipe / A&A works.
• Electrical: Familiar with retrofit / renovation / lighting control / BMS.

Job Requirements:

• Diploma or Degree in Electrical / Mechanical Engineering or equivalent.
• Min. 3-5 years’ experience in construction industry in Singapore.
• The candidate will assist and support the Project Manager in handling and monitoring the progress of projects.
• Well versed in English.
• Able to commence work immediately or short notice.

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Work Location : East
Work Day : Monday to Friday (8.30am to 5.30pm)

Responsibilities:

• To work with all internal departments & suppliers to create a friendly & ensure quality awareness environment so as to achieve zero defect products

• To lead & work with MRB team on the OSV activities so as to meet supplier's requests before any RMA / RTV process

• To understand customer manufacturing quality requirements & align with the business agreement so as to work effectively with suppliers on the line rejection

• Work closely with suppliers to expedite on-the-line defective returns, and follow-up on the disposition & FA report so as to work back with the internal relevant departments. Eg : SCM, Quality, Process and etc.

• Maintain zero defective quality on hand & aging period

• Support parts localization and work closely with factory RD & engineering team

• Compliance with RBA

Requirements:-

• Degree / Diploma in quality/engineering

• Ability to work with the customer, HQ / factory, Peers / Subordinate, and Superiors

• SAP knowledge

• Able to multi-task & work under pressure

• Able to handle customer complaints and work well with internal & external departments to resolve the quality issues

• Able to provide constructive solutions/advice to the team

• Participate in con-call outside office hours if required

Compliance with RBA standard

Compensation & Benefits

• Annual Increment
• Performance Incentive Bonus
• Career Progression

For quick reply, please contact me at +65 85878287

Registration Number: R21100938 (Tan Jie Bei)

EA Licence No: 22C1301 (Unisearch Services Pte Ltd)

As a Steel Structure Engineer specializing in steel structures, you will be responsible for planning, designing, and overseeing the construction and integrity of steel-based structural components and frameworks. This role involves ensuring structural safety, compliance with codes and regulations, and independent delivery of engineering solutions from inception to completion.

Key Responsibilities:

1. Design and Analysis: Conduct structural design calculations for steel components, connections, and frameworks, ensuring compliance with relevant codes (e.g., AISC, Eurocode, or BS standards).
   Analyze load-bearing requirements, seismic impact, and material properties to create safe, efficient designs.
   Create detailed drawings, specifications, and technical documentation.
   
2. Project Management: Manage steel structure projects from initial design to final implementation, including budgeting, scheduling, and coordinating with other teams.
   Perform risk assessments, implement quality control procedures, and ensure compliance with safety and environmental standards.
   Monitor project progress, making adjustments as necessary to stay on track with timelines and budgets.
   
3. Collaboration and Coordination:Work closely with architects, civil engineers, project managers, and construction teams to integrate structural requirements into overall project design.
   Coordinate with suppliers and contractors to ensure timely and accurate delivery of materials and execution of installation.
   Provide technical guidance and oversight to junior engineers and drafters.
   
4. Quality Assurance and Compliance: Conduct on-site inspections, quality checks, and structural assessments to ensure compliance with design specifications.
   Ensure that all steel structures meet safety and regulatory requirements, adapting designs as needed for unforeseen challenges.
   
5. Reporting and Documentation: Prepare project reports, cost estimates, and technical summaries for stakeholders.
   Maintain organized records of project documentation, calculations, and revisions.
   

Requirements:

1. Education and Experience:Bachelor’s degree in Civil Engineering, Structural Engineering, or related field. At least 2 years of experience in steel structure engineering, with a strong portfolio of completed projects.
   
2. Technical Skills: Proficiency in structural analysis software (e.g., STAAD Pro, ETABS, SAP2000) and CAD tools (e.g., AutoCAD, Tekla, Revit).
   Solid understanding of steel design standards, load calculations, material properties, and connection detailing.
   
3. Project Management Skills:Strong project management abilities, including budgeting, scheduling, and resource allocation.
   Ability to independently lead a project from start to finish, making critical decisions as necessary.
   
4. Soft Skills:Excellent communication and interpersonal skills to collaborate effectively with multidisciplinary teams. Detail-oriented with a strong commitment to accuracy and quality. Problem-solving skills to address design and site challenges effectively.
   

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

• Remote Support
• Counter Services/Walk in
• Mass Onboarding/New Hire Setup
• UAM Account Pre-Provision
• Pre-Setup Autopilot & Follow up non-Compliance issues
• Reimage laptops
• Setup MacBook, Laptop, Printers, Kiosk machines, etc
• Setup iPads or phone.
• At least 1 year IT Support experience
• IT Support

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 8 years’ experience

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

- Degree holder with about 5 years’ experience or Diploma holders with 8 years’

experience in design and implementation.

- Able to multi-task and work in a fast paced environment

- Possess initiative, drive and ability to work independently

- Good interpersonal/communicational skills

- Experience as a consulting in the construction industry is a pre-requisite

Responsibilities:

• Equipment and Utilities qualification, facility qualification, controlled temperature chamber qualification with temperature mapping.
• Develop, review and/or approve validation lifecycle documents and protocols/reports and deliverables in accordance with relevant policies, standards, procedures and guidelines, and completed in a timely fashion.
• Take lead and review project design documents (P&IDs, PFDs, URS etc.)
• Define user requirements and create SOPs or documentation related to the validation activities
• Manage qualification execution and lead validation deviation investigation encountered in qualification.
• Create and review validation lifecycle documents: User Requirement Specification, Functional Specification, Risk Assessments, Validation Protocols (IQ/OQ/PQ/CPV) and Reports, Study Protocols and Reports, Requirement Traceability Matrix, CFR Part 11 assessment and validation submission dossier
• Collaborate with multi functions to arrange, plan and ensure smooth running of the qualification activities
• Participate in site Validation Maintenance Program.
• Write execution related deviations and change requests
• Support change implementation on site.
• Manage Change Control to update SOPs, Risk Assessment, Requirement Traceability Matrix and/or Automation System Life cycle documentation as needed
• Perform validation documentation and/ or support validation documentation in accordance to the division procedures
• Regular preview of pending activities to maintain validation status with validation lead, supervisor or manager
• Ensure validation execution meets compliance, validation standards and cGMP requirements
• Any other task as assigned by Supervisor/Manager

About You:

• Diploma/Degree in Engineering or Science Disciplines with 3 to 5 years experience in Pharmaceutical Industry
• Proven track record in Equipment Qualification for HVAC and Utilities Validation (IQ/OQ/PQ/CPV)
• In-depth knowledge on cGMP, GDP and ASTM E2500
• Proactive and self-motivated
• Demonstrated proficiency of written and verbal communication skills in English (including technical writing and presentations)
• Effective Project Management, leadership, communication and interpersonal skills

Job Type: Contract

Contract length: 9 months

Job Description

• Able to read design drawings and operate generator control panel and switchgear.
• Able to plan and arrange commissioning work at site.
• Design customized power generator control circuits with PLC programming, networking, HMI and switchgear layout.
• Work closely with Service Engineers to handle factory test in workshop and commissioning at customer's site.
• Provide assistance to Sales Engineers in technical specification and attending technical meetings at customer's site.
• Able to support and troubleshoot control issues through phone and email, remotely.
• Able to coordinate with Site Engineers and Superintendents on site commissioning.
• To handle factory internal testing in workshop.
• To handle Factory Acceptance Test in workshop in the presence of customer.
• Provide technical assistance to Sales Engineers.
• Coordinate with customer for technical issues to meet customer's technical requirements.
• Able to support and troubleshoot programming issues throught remote internet/computer device.
• Monitor projects through completion, providing corrections, modifications or assistance to other department as needed.

Qualifications & Requirements

• Degree in Electrical or Engineering equivalent.
• Minimum 5 years of design experience in either power generation controls and/or electrical switchgear or automation control.
• Proven experience with low-voltage and medium-voltage switchgear design, control panel development, and power system studies.
• Proficiency in AutoCAD, E3, or other CAD tools.
• Demonstrate above-average electrical engineering skills, preferably within the power generation industry or closely related field.
• Ability to manage multiple projects simultaneously, meet deadlines, and coordinate across teams.
• Generator control knowledge is a plus.
• Strong written and verbal communication skills for creating documentation and liaising with cross-functional teams and clients.
• Excellent analytical and troubleshooting abilities to resolve complex electrical design challenges.
• Experience in PLC and HMI (touchscreen and/or IPC) programming.
• Knowledge in network communication and SCADA is a plus.
• Ability to read and interpret electrical schematics, plans, drawings, prints or similar job write-up.
• Willing to travel overseas as frequent global site visits is expected.

JOB SCOPE:

• Generate leads and identify sales opportunities
• Present product demos and technical solutions to customers
• Prepare proposals, quotes, and pricing
• Collaborate with engineering teams to design tailored solutions
• Assist with product installation and integration
• Provide post-sales support and customer training
• Manage sales pipeline and track progress
• Build and maintain customer relationships
• Negotiate pricing and close deals
• Stay current with product knowledge and industry trends

REQUIREMENTS:

• At least 3 years of experience in manufacturing automation machines
• Knowledge of CAD software and Microsoft Office
• Diploma (or higher) in any discipline; related experience may apply
• Self-motivated, goal-oriented, creative, and able to multitask
• Able to collaborate effectively with others
• Frequent travel may be required
• Class 3 driving license preferred
• Willingness to adapt and be flexible
• Preferably own vehicle (car allowance provided)

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

- Assess Die Overkilling In Line and Optimization of criteria

• Define Sampling Criteria for Yield Enhancement (YE) Wafer – Initial is to align with RPM lot
• Define and Create YE In Line DL2 & MRDA Flow: Full scan with tighter criteria (higher magnification) with non-die-kill
• Create Deviation flow to Route to YE Flow
• Define and Create YE Probe Flow: Full data logging and Test-to-end to capture as much data as possible
• Data Analysis:
• Correlation of MRDA (Metro Real-time defect analysis) Defect to Probe to identify in line failure mode causing probe fail and failure analysis

- Manage Risk of deviation

- Provide organizational leadership to build functional strategies & processes, and collaborate with partners to deliver strategic solutions

• Establish organizational roadmaps and strategies. Apply extensive knowledge and tenacity to carry out strategies.
• Collaborate with peers to construct global solutions.
• Ensure conflict resolution and assist with identifying escalation paths.
• Align internal strategies and communicate line of sight to corporate strategic objectives.
• Establish and communicate department capabilities to ensure partner expectations are aligned.
• Manage conflict and build effective relationships with internal and external partners.
• Initiate and sustain effective communication with internal and external partners.
• Provide advice to senior and executive management on strategic decisions
• Establishes and manages budget/finances for the team

- Ensure a Safe, Compliant, and Ethical Work Environment

• Maintain knowledge of and apply company safety, labor, and ethics policies.
• Communicate requirements and expectations to leaders and external partners.
• Ensure execution of mandatory training for organization.
• Identify and resolve and / or report potential safety, security, and labor issues.

Requirements

• Bachelors, Masters or PhD in Electrical Engineering, Materials Science, Chemical Engineering, or related field
• At least 4 years of experience in Semiconductor Manufacturing and on a leadership capacity, with focus on Advance Packaging technologies and High Bandwidth Memory (HBM) integration, in yield enhancement
• Experience in PWF (Post Wafer Fabrication), Backend engineering process, assembly package technology development and technical knowledge with die and wafer level process technology with understanding of Micron’s silicon and how it interacts at a package level through CPI (Chip Package Interaction), in yield enhancement
• Strong leadership and vision and must be able to comfortably work across organizational boundaries and geographies.
• Demonstrated ability to influence executives, senior leaders and partners on strategic decisions across multiple functions and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Ability to be guided by business objectives and determine best methods for delivering results.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Proven facilitation skills including the ability to influence others, build consensus, and resolve conflict.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill

Keen on the role? Apply now!

Job Scope:

• Project planning, coordination, and execution.

• Design and integration of automation systems according to project requirements.

• Graphical design of the electrical network.

• Plan installation schedule with client and installer

• Testing and commissioning of systems.

• Preparation of project documents and drawings.

• Manage a group of Application Engineers in the functional aspect.

Requirement:

The candidate is preferable with at least a Degree in the Engineering field (Electrical or Power & Automation, experienced candidates are welcome.)

• Experience/knowledge in SCADA, PLC & HMI in Power System Control or Environmental Control Systems is an added advantage.

• Knowledge of data communication and automation systems for electrical networks.

• Knowledge and experience in IT networking as well as server/VM setup.

• Knowledge in Power Quality area is a plus

• Knowledge in HVAC system is a plus

• Required skill(s): Microsoft Office, Savvy in various computer skills such as computer networking, setting up new PC/VMs, and knowledge of electrical systems.

• Mature and able to handle tasks independently, result-oriented, and self-driven team player with good communication skills.

• Good personality, responsible, hardworking person.

• Fast learner and good soft skills.

• Ability to work as a team, lead and supervise the contractors.

• minimum 5 years of experience.

• Experience in team management in functional aspects.

• Process excellent team spirit and good leadership.

Additional remark:-

- Candidate with more years of technical and/or team management experience will be considered for Team Lead or Manager position/package.