Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

About the Company

Our Client is an innovator and leader in the mobility space.

Responsibilities

We’re looking for a Software Engineering Technical Lead to provide sound technical expertise in the design of backend architecture and systems to deliver impactful products to users.

• Lead backend architecture design, defining scope and optimising systems;
• Design functional flows and document critical requirements;
• Develop code and provide technical mentorship to team members;
• Resolve complex technical issues in a hands-on manner;
• Enforce best practices to ensure quality and security of code;
• Perform evaluations on existing systems to propose enhancements or mitigate risks;
• Work across functions and with internal stakeholders.

Requirements

• Degree in Computer Science or any relevant discipline;
• At least 6 to 8 years of experience in a technical role in backend development;
• Strong proficiency in multiple tech stacks;
• Hands-on experience in Agile software development;
• In-depth understanding of and experience in AWS;
• Strong problem-solving skills;
• Experience in various documentation tools;
• Good communication skills and ability to work cross-functionally.

Employment Details

• Permanent role;
• Hybrid work arrangement;
• Excellent remuneration and benefits.
• 
  

Get in touch with us

If you’d like to explore this opportunity, please reach out to Charmaine Tan (Regn No. R1102130) at [email protected] for a confidential discussion.

FCS CAREERS PTE LTD (EA 94C4359)

Data Protection Notice: By submitting any application or resume to us, you acknowledge that you have read, understood, and agreed to our Data Protection Policy (www.fcs-careers.com/about/data-protection), and that you consent to the collection, use and/or disclosure of your personal data by us for the purposes set out in the Policy. You may withdraw consent or make an access or correction request in respect of your personal data, however, depending on the nature or scope of such request, we may not be able to continue providing services to you. For any request, enquiry, or feedback, please contact our Data Protection Officer ([email protected]).

Responsibilities:

• Lead the development and implementation of software solutions at the client’s workplace.
• Design architecture and ensure scalability of applications on-site.
• Mentor junior developers and conduct code reviews within the client’s team.
• Collaborate with client stakeholders to refine requirements and deliver high-quality solutions.
• Identify and resolve complex software issues efficiently while working on-site.

Requirements:

• Bachelor’s or Master’s degree in Computer Science or related field.
• 3-6+ years of experience in software development.
• Proficient in C++/Golang/C#
• Familiar with Linux/Unix development environment,
• Familiar with shell, system programming;
• Familiar with TCP/IP protocol, network programming, database programming (MySQL, Redis, SQL Server), familiar with Kafka;
• Experience in full software development lifecycle (SDLC) and agile methodologies.
• Excellent analytical, problem-solving, and leadership skills, with the ability to work directly with clients.

We are searching for an *exceptionally skilled AWS Cloud Software Engineer—someone who doesn’t just know AWS, but has **mastered* it. This is an exclusive opportunity to tackle complex, large-scale cloud engineering challenges in a fast-paced, high-stakes environment. If you can solve cloud problems at scale, architect solutions that others can’t, and optimize cloud infrastructure in ways that seem impossible, then we want you on our team.

#### *What You Will Be Expected To Do:*

- Architect complex, multi-region, multi-account AWS environments, and manage thousands of services across different stages of the software lifecycle with zero downtime.

- Design and implement *highly granular* cost optimization strategies that reduce AWS bills by 50% or more without sacrificing performance or scalability, working with hundreds of concurrent instances and services.

- Build and scale serverless applications on AWS with *millisecond latencies*, utilizing Lambda, DynamoDB, and other serverless technologies at extreme scale.

- Secure highly sensitive data and systems in compliance with *zero-trust security models*, designing advanced IAM policies and using AWS encryption and network security tools to prevent any possible vulnerabilities.

- Develop *multi-cloud solutions* that integrate AWS with other cloud providers (GCP, Azure) seamlessly, enabling hybrid cloud architectures that can handle mission-critical workloads at global scale.

- Solve AWS performance issues that others cannot, finding bottlenecks and failures across multi-layered services using advanced monitoring tools like CloudWatch, X-Ray, and third-party integrations.

- Automate infrastructure provisioning using *advanced Infrastructure as Code (IaC)* practices, employing AWS CloudFormation, AWS CDK, or Terraform with a level of sophistication that minimizes manual intervention to near zero.

- Contribute to the *evolution of AWS services*—work directly with AWS teams to influence and test cutting-edge services, potentially even contributing to beta testing and product feedback.

- Lead global disaster recovery planning and execution, ensuring the continuity of complex cloud-based systems with automatic failover mechanisms and *zero data loss*.

- Push the boundaries of cloud technologies with *predictive scaling, **auto-healing* mechanisms, and *AI-driven optimization*.

#### *We’re Looking for Someone Who:*

- *Has deep, hands-on experience* with almost every AWS service (e.g., EC2, S3, Lambda, RDS, DynamoDB, EKS, CloudFormation, Redshift, Kinesis, etc.) and knows how to leverage these services in *cutting-edge, complex systems*.

- Can *design architectures* that are not just scalable, but also ultra-efficient, highly secure, and resilient in a highly dynamic cloud environment.

- Has *in-depth knowledge* of AWS best practices for security, compliance, and governance, including advanced IAM policy management, VPC flow, custom CloudTrail alerts, and maintaining compliance at scale in regulated environments (e.g., HIPAA, SOC2, PCI).

- Is a *master of automation, with experience designing and maintaining **highly complex CI/CD pipelines* using AWS CodePipeline, Jenkins, and GitOps practices.

- Is familiar with *AWS emerging technologies, including but not limited to: **AWS Graviton, **AWS Outposts, **Amazon Elastic File System (EFS), **Amazon QLDB, and **Amazon Elastic Inference*.

- Can demonstrate *advanced serverless architectures* using AWS Lambda, API Gateway, and Step Functions, running mission-critical applications at a global scale.

- Is an expert at *cost optimization* in complex environments with a deep understanding of Reserved Instances, Spot Instances, Savings Plans, and AWS Budgets. Able to cut cloud costs by a significant margin without affecting system performance.

- Has demonstrated *thought leadership* in cloud technology, having contributed to open-source cloud tools, written technical blogs, or spoken at AWS re:Invent or similar conferences.

- Has experience designing systems that handle *millions of transactions per second, utilizing highly parallel processing techniques like **AWS ParallelCluster* and *Amazon S3 Select*.

#### *Key Challenges You Will Face:*

- *Re-Architecting* legacy systems to be completely cloud-native with *zero downtime* and minimal manual intervention, all while maintaining a 99.99% SLA.

- *Scaling AWS environments* from 100 to 10,000+ EC2 instances with *auto-scaling groups* while ensuring security and operational simplicity.

- *Implementing real-time analytics solutions* with AWS Kinesis and Redshift at a level where thousands of data streams are processed and analyzed in *real-time*, driving mission-critical business decisions.

- *Designing fault-tolerant, multi-region architectures* that survive significant global AWS outages or data center failures, ensuring business continuity and zero data loss.

#### *Requirements:*

- *At least 5-7 years of direct AWS cloud experience*, including at least 3 years architecting and maintaining complex, high-scale production environments on AWS.

- *Expert-level certification*: AWS Certified Solutions Architect – Professional, AWS Certified DevOps Engineer – Professional, or AWS Certified Security Specialty.

- Proven track record of *successfully managing large-scale production systems* using AWS and ensuring they meet performance, security, and cost expectations.

- Deep understanding of *microservices architecture*, containerization (Docker, Kubernetes), and CI/CD automation at scale.

- Advanced programming experience (Python, Go, Java, or similar) for automation, application deployment, and cloud management.

- Advanced *troubleshooting* and *debugging* experience across large-scale cloud architectures, including identifying and resolving critical production issues quickly.

- Experience with *multi-cloud architectures* and hybrid-cloud integrations (AWS + GCP/Azure).

#### *Bonus Points:*

- Experience with *AWS IoT* or *edge computing* services.

- Strong background in *Big Data* solutions using AWS technologies (e.g., EMR, Redshift, Athena).

- Published work or open-source contributions in the cloud-native ecosystem.

Background

We are looking to digitalise the various services and business processes of our accounting and corporate services business. Therefore, we desire to leverage and apply the prevailing broad advances in various digital technologies to custom develop and implement targeted solutions (our IP) that enable us to serve our clients more efficiently and competitively. This initiative is also expected to enhance the work-roles of our team members and enable them to elevate their skills, job satisfaction and career sustainability (eg: minimise mundane tasks and transition towards more review-oriented, supervisory and advisory responsibilities)

Role and Responsibilities

You will be required to assist our business leaders to analyse the overall technical requirements of our strategic business initiative and to propose and design the overall system and applications solution that will serve as the backbone of the software platform.

You will be responsible to evaluate various technologies and frameworks, plan out the proof-of-concepts, and establish the MVP exit criteria for the proposed functionalities.

You will be hands-on to design, develop/code, QA and roll-out the proposed applications from POC to MVP to full blown capabilities so as to enable the business to reap its ROI. In this regard, you will be adept in every aspect of coding competencies, including but not limited to frameworks, mobile and web program design and coding (in person), API development, DB and system performance tuning, cloud setup, and the incorporation of ML and AI engines.

Qualifications and Experience

• Graduate in the requisite IT, Technology, Computer Science and/or Engineering disciplines;
• At least 10 years relevant working experience in this field;
• Proven track record in the coding and implemention of projects of this nature and scope;
• Full stack hands-on skills in the latest technical development trends;
• Able to lead by example with personal delivery of output, as well as subsequently to build up and lead a competent team to accomplish phased tasks;

We are looking for a creative and experienced UI/UX Designer to craft engaging, user-friendly digital experiences for our products. This role blends research, creativity, and technical expertise to drive intuitive design and enhance user satisfaction. You will collaborate with product managers, developers, and other stakeholders to deliver polished, functional, and visually appealing designs that align with our brand identity and clients’ expectations.

Key Responsibilities:

1. User Research and Analysis

• Conduct in-depth user research to understand customer needs, preferences, and behaviors.
• Analyze data and user feedback to uncover pain points and opportunities for design improvements.
• Develop user personas, journey maps, and use cases to guide the design process.

2. Wireframing and Prototyping

• Design detailed wireframes, user flows, and storyboards to demonstrate functionality and layouts.
• Create interactive prototypes to communicate design ideas and gather feedback from stakeholders.

3. Visual Design and Branding

• Develop visually stunning, user-centric designs that adhere to brand guidelines.
• Establish and maintain comprehensive UI guidelines to ensure a consistent design system.
• Partner with the marketing team to deliver a cohesive brand experience across platforms.

4. Usability Testing and Iteration

• Conduct usability testing to validate design decisions and identify areas for improvement.
• Continuously iterate on designs using user feedback, technical constraints, and business objectives.

5. Collaboration and Communication

• Develop and deliver clear design specifications, detailing UI elements, interactions, and logic flows for implementation.
• Collaborate with developers to ensure design accuracy during implementation.
• Actively engage with product managers and stakeholders throughout the design and development process.
• Present and articulate design concepts, decisions, and progress to internal teams and stakeholders.

Qualifications:

Required:

• Experience: Minimum 2+ years of proven experience in UI/UX design or related fields.
• Technical Skills: Proficiency in Figma, Sketch, Adobe XD, and Adobe Creative Suite.
• Portfolio: A strong portfolio demonstrating your design process, problem-solving abilities, and measurable impacts on user experience.
• Knowledge: Expertise in responsive design, mobile-first principles, and accessibility standards.
• Soft Skills: Exceptional communication, collaboration, and time-management abilities.

Preferred:

• Familiarity with front-end languages (HTML, CSS, JavaScript) for enhanced collaboration with developers.
• Experience in motion design or creating micro-interactions to elevate user engagement.
• Knowledge of user research methodologies such as A/B testing, surveys, and analytics tools.
• Educational background in design, human-computer interaction, or a related field.

Why Join Us?

• Collaborate with a dynamic and innovative team in crafting impactful digital experiences.
• Gain opportunities to work on cutting-edge projects and grow your design expertise.
• Contribute to a user-focused design culture where your creativity and insights matter.

- Experience in ChangeMan

- Extensive knowledge of the configuration management principles and procedures, and software testing procedures.

- Experience/Knowledge in Mainframe Devops using IDz, Git.

- Good experience on COBOL/JCL/CICS/JES/DB2/MVS/CICS concepts.

- write and maintain any customization needed for the change management tool - including creating rexx and/or xml reports, and customizing skeletons and panels as needed.

- Responsible for updating and maintaining documentation.

- Serve as primary contact for questions or problems relating to the Change Man Software, Code promotion etc.

- Migrate/Promote Software based on established procedures.

- Validate/Ensure approvals for Code promotion.

- Migrate software and verify successful migration.

- Maintain and manage Change man configuration, backup, recovery.

We are seeking an experienced and highly skilled Technical Lead with a strong background in Python development, software delivery, and leadership for a large organisation.

Key Responsibilities:

• Lead and mentor a team of developers, ensuring high-quality code delivery and adherence to best practices.
• Independently plan and architect end-to-end software solutions, ensuring scalability, reliability, and performance.
• Oversee the entire software development lifecycle, from requirements gathering to deployment and maintenance.
• Design, develop, and implement robust and efficient software systems using Python.
• Collaborate with product managers, designers, and stakeholders to align technical solutions with business objectives.
• Conduct code reviews, troubleshoot issues, and implement performance optimizations.
• Foster a culture of innovation, collaboration, and continuous improvement within the team.
• Manage project timelines, deliverables, and resource allocation to ensure successful project delivery.

Qualifications and Skills:

• 8+ years in software development with significant experience in Python and software delivery; 3+ years in a leadership or technical lead role.
• Strong proficiency in Python and related frameworks (e.g., Django, Flask).
• Deep understanding of software development methodologies (Agile, Scrum).
• Experience with cloud platforms (AWS, Azure, or Google Cloud).
• Knowledge of CI/CD pipelines, version control (Git), and DevOps practices.
• Proven ability to independently design, plan, and architect technical solutions.
• Demonstrated ability to lead, mentor, and motivate a team.
• Exceptional written and verbal communication skills to convey technical concepts to diverse audiences.
• Analytical mindset with strong problem-solving abilities.
• Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience).
• Experience working on government projects

Do send your resume across to [email protected] if you are keen to apply.

• Research, design, and develop computer and network software or specialised utility programs.
• Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with computer hardware engineers to integrate hardware and software systems and develop specifications and performance requirements.
• Design, develop, and deploy FileNet-based solutions
• Configure and administer FileNet systems, including workflows, security, and metadata
• Develop and maintain custom FileNet applications using APIs and scripting languages

Key Responsibilities:

Technical Leadership & Client Collaboration

Provide leadership and direction to software delivery teams, acting as the key technical point of contact in client discussions to propose and implement solutions.

Software Architecture & Development

Design and develop software systems and applications that meet the specific needs of clients, users, and other stakeholders.

Requirements Planning & Scheduling

Collaborate with the Project Manager and Scrum Master(s) to ensure projects are delivered on time, within scope, and according to schedule. Review project requirements and create detailed work plans, using agile methodologies like daily stand-ups and sprints to achieve critical milestones.

Team Collaboration & Technical Viability

Partner with developers, engineers, and other stakeholders to ensure that software systems and applications are technically feasible and optimized for efficiency.

Stakeholder Communication

Act as the intermediary between team members, management, and clients to ensure project deliverables align with expectations and defined scope.

Technical Guidance & Problem-Solving

Provide technical expertise and troubleshooting support to the development team, leading efforts to resolve technical issues.

Documentation & Information Sharing

Create and maintain technical documentation, design plans, and other necessary materials to support effective communication and teamwork.

System Improvement Recommendations

Assess and recommend upgrades or modifications to existing software systems to improve functionality, performance, and user experience.

Innovation & Industry Trend Adoption

Stay updated on new software development trends and technologies, incorporating these into design and development practices. Ensure adherence to industry standards, regulations, and best practices (e.g., SGTS, GCC, IM8, etc.)

Any other ad-hoc duties as assigned by supervisor.

Job Requirements:

• 3+ years of experience in technology / software sales or pre-sales consulting
• 5+ years of experience in infrastructure architecture (on-prem/cloud), database architecture and networking
• 7+ years in software and systems design and implementation, including development of mobile applications
• Proven experience as a Solution Architect, with a strong portfolio of software systems, applications designed and developed of project delivery is preferred
• Proficiency in software development languages such as Java, Python, C++, or others
• Strong problem-solving, analytical, and critical thinking skills
• Working knowledge of software development tools and methodologies (e.g. Agile, SCRUM)
• Experience in a customer-facing, sales aligned role, presenting to small and large audiences

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Responsibilities:

• Involved in new systems development and enhancements, and maintenance to existing applications to ensure alignment with business objectives
• Responsible for analysis, programming, problem resolution and user support for one or more system applications
• Plan, execute and monitor projects assigned to ensure deliverables are within scope, budget and schedule
• Prepares technical and user documentation
• Ensure codes are securely written and designed accordingly to industry standard.
• Maintain proper code versioning using source code management tool

Requirements:

• Minimum 1 years of Application development (full stack) and/or support experiences, of which must have at least one full development cycle from design to implementation from start to completion
• Good knowledge and understanding of the Agile / SCRUM software development cycle and familiar with other development methodologies
• Good working experience developing web applications, and integrating enterprise systems
• Experience with web Front End technologies (HTML5 / CSS) and CSS Framework such as Bootstrap
• Good working experience with JavaScript, web frameworks, RESTful APIs and related technologies
• Experienced with back-end language in Java or .NET

Interested candidates who wish to apply for the advertised position, please click APPLY to submit your resume.

EA License No.: 13C6305

Reg No: R1770654

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Lead and manage a small team of developers to deliver the modules to develop web-based application systems
• To perform requirement analysis and oversee the implementation of architectures of the project scope.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based)
• To conduct unit testing using automated unit test frameworks and identify and address possible risk by conducting mitigation action planning.
• Conducting configuration of your own work or from the team and assess the technical impact of multiple technologies/strategies.
• Using coding standards and best practices to ensure quality.
• Contribute as a team member to operational, integration, or application architecture requirements, design, implementation, or on-going operations deliverables.

Requirements:

• Candidate must possess at least a Diploma/Degree in Computer Science/Information Technology or equivalent.
• At least 2 years of relevant experience in JAVA/J2EE Technologies.
• At least 2 years of experience writing code using languages such as (but not limited to) J2EE, Java, PL/SQL.
• Some team leading experience.
• Must have Hands-on experience with Java Struts, Spring, and Hibernate enterprise frameworks.
• Worked with Version Control Systems like SVN (Subversion), GIT.
• Minimum experience of 3 or more full SDLC for web application projects.

Interested candidates who wish to apply for the advertised position, please click APPLY to submit your resume.

EA License No.: 13C6305

Reg No: R1770654

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Oversee the daily operations of the accounting department.
• Ensure compliance with accounting standards and regulations.
• Prepare and review financial statements and reports.
• Develop and implement accounting policies and procedures.
• Manage and mentor accounting staff.
• Collaborate with other departments for budgeting and financial planning.
• Provide strategic financial guidance to senior management.
• Coordinate audits and liaise with external auditors.
• Analyze financial data to identify trends and make recommendations.

Qualifications

• Bachelor’s degree in Accounting, Finance, or related field.
• CPA or CMA certification preferred.
• At least 7-10 years of progressive accounting experience.
• Proven experience in a management role.
• Thorough knowledge of accounting principles and procedures.
• Strong understanding of financial reporting and compliance regulations.
• Excellent analytical and problem-solving skills.
• Strong leadership and team management abilities.
• Exceptional communication and interpersonal skills

We are seeking a versatile senior software manager to develop cutting-edge software solutions to optimize our business operations. In this role, your duties will include supervising junior software developers, analyzing software performance and configuration systems, and managing the deployment and integration of new software. You will also be required to hire new software developers.

To ensure success as a senior software manager, you should possess extensive experience as a senior software manager and a mentor of junior software developers. First-class senior software managers drive software innovation at their companies.

Senior Software Manager Responsibilities:

• Consulting with management and software developers to determine software solution requirements.
• Evaluating software solutions and system performance, as well as supervising the software development team.
• Demonstrating patience and using effective explanations when mentoring junior software developers.
• Managing the development, deployment, and integration of software solutions.
• Determining system specifications and analyzing test stage data prior to software installation.
• Managing the installation and configuration of software solutions.
• Collaborating with front end users on software functionality.
• Resolving software deployment and integration errors, and documenting processes.
• Performing routine maintenance and monitoring performance metrics.
• Keeping abreast of new software technologies, as well as conforming to best practices in cybersecurity.

Senior Software Manager Requirements:

• Bachelor's degree in software engineering, computer science, information systems, information technology, or similar.
• Master's degree in a related field preferred.
• 5 years of experience in software development and team management.
• In-depth knowledge of programming languages such as Python and JavaScript.
• Ability to mentor junior software developers, as well as to collaborate with all stakeholders.
• Extensive experience in developing, deploying, and integrating software solutions.
• Proficiency in documenting processes and monitoring performance metrics.
• Knowledge of best practices related to data encryption and cybersecurity.
• Ability to keep up with software industry trends and innovation.
• Exceptional interpersonal and communication skills.

• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• BMS (Building Management System) // ACMV // Control Valve
• Mechanical Engineering - Training Provided

Job Responsibilities:

Liaison with Subcontractors:

• Coordinate with subcontractors for project updates and service execution, ensuring alignment with technical specifications.
• Monitor subcontractor performance to uphold quality and safety standards.

Client Interaction:

• Serve as the primary contact for clients regarding service inquiries and project progress.
• Attend client meetings to discuss project requirements, timelines, and address any concerns.

Project Management:

• Track and manage service projects, ensuring timely delivery and adherence to client specifications.
• Assist in preparing and submitting project documentation, including service reports and compliance materials.

Coordination of Meetings:

• Organize and participate in internal and external meetings to discuss project status and resolve issues.
• Prepare agendas and meeting notes, ensuring effective communication among stakeholders.

Documentation and Reporting:

• Maintain accurate records of project activities, subcontractor communications, and client interactions.
• Generate regular progress reports for management and stakeholders.

Continuous Improvement:

• Identify opportunities for process improvements in service delivery and communication.
• Collaborate with team members to implement best practices, enhancing operational efficiency and customer satisfaction.

Requirements:

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• Training will be provided for candidate without or with lesser experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

#NEW# Software Engineer Lead (Java, React) - 12 Months Contract

Are you passionate about driving impactful solutions, delivering high-quality engineering for pivotal projects? If so, we're seeking motivated software engineers eager to work alongside a collaborative, kind, and growth-oriented team. Your contributions will significantly impact our client's system.

Join our team to automate language translation and localization flows for business, product, and development projects.

Work Arrangement: 8am-8pm ( 8H daily with 1H lunch break Monday to Friday)

Responsibilities:

• Develop robust back-end applications and services using Java for high-traffic systems, ensuring scalability and performance.
• Collaborate with the front-end team to integrate user-facing elements with server-side logic, primarily using React.
• Implement and maintain AWS-based solutions to support cloud infrastructure and services.
• Utilize GraphQL to optimize APIs for various applications and data retrieval.
• Design, develop, and maintain databases such as MongoDB and ElasticSearch, ensuring efficiency and scalability.
• Contribute to the development and implementation of server-side logic using Go and Python for enhanced functionality.
• Leading and coaching team members

Requirements:

• Proven experience in back-end development with a focus on Java, React, AWS, and GraphQL.
• Strong proficiency in developing and managing databases, particularly MongoDB and ElasticSearch.
• Proficiency in Go and Python for server-side logic and back-end functionalities.
• Expertise in designing and implementing cloud-based solutions using AWS services.
• Familiarity with front-end technologies and the ability to collaborate with front-end developers to ensure smooth integration.
• MUST BE 100% HANDS-ON
• Leading and coaching team members

Qualifications:

• Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent work experience.
• Strong problem-solving skills and the ability to work in a collaborative team environment.
• Excellent communication skills and the ability to explain complex technical concepts to non-technical stakeholders.
• 1+ years Leadership experience
• You will need to attend a 2-hour real-time coding test !!!

Additional Skills (Preferred but not required):

• Knowledge of front-end technologies (HTML, CSS, JavaScript, React).
• Experience in containerization and orchestration tools like Docker and Kubernetes.
• Understanding of microservices architecture and RESTful API design.

Join Our Team:

If you are a dedicated Full Stack Developer with a keen interest in back-end development, possess the above skill set, and are passionate about creating high-performance, scalable, and secure systems, we invite you to apply and become a key part of our innovative and collaborative team.

Contract Duration: The initial contract spans until March 31, 2024, with the potential for extension based on performance and company standing. We aim to extend the contract through March 31, 2025, and potentially further.

Please contact [email protected] for more information.

Key Responsibilities:

• Component Enhancement: Enhance and maintain components within a comprehensive environment for systematic risk trading, utilizing modern C++ and Python, integrated with q/kdb+ for analytics and user interfaces.
• Requirements Analysis: Analyze business requirements with the Equity Line of Business (LOB), and create architectural designs for low latency C++ components, particularly for market making activities.
• Collaboration: Collaborate closely with the Site Reliability Engineering group to ensure industry-leading reliability and scalability of trading solutions.
• Core Development: Lead the core development and testing of low latency components, ensuring optimal performance and minimal downtime.
• Automation Focus: Promote an automation-first mindset across the software development lifecycle, emphasizing shift-left testing practices.
• Team Culture: Foster a responsible and professional culture within project teams, encouraging collaboration and accountability.
• Communication: Communicate effectively with both technical and non-technical stakeholders to ensure alignment and understanding of project objectives.

Key Requirements:

• Minimum of 8 years of extensive experience in C++ development on Linux, with a strong focus on building quantitative electronic trading applications.
• Specific exposure to automated on-exchange market making is preferred.
• Strong programming skills in C++, with practical exposure to Python development.
• Familiarity with Agile software development practices and the ability to implement associated best practices.
• Knowledge of equities, futures, options, and FX asset classes, along with algorithmic trading strategies for these products.
• Familiarity with regulatory requirements for trading in APAC markets.
• Working knowledge of architecting applications for cloud and/or containerized environments.
• Strong communication skills, capable of collaborating effectively with diverse teams and stakeholders.

About TikTok

TikTok is the leading destination for short-form mobile video. At TikTok, our mission is to inspire creativity and bring joy. TikTok's global headquarters are in Los Angeles and Singapore, and its offices include New York, London, Dublin, Paris, Berlin, Dubai, Jakarta, Seoul, and Tokyo.

Why Join Us

Creation is the core of TikTok's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible. Together, we inspire creativity and enrich life - a mission we aim towards achieving every day. To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always. At TikTok, we create together and grow together. That's how we drive impact-for ourselves, our company, and the users we serve. Join us.

Team's introduction:

Support revenue related frontend feature. Handle things literally about money in LIVE ecosystem, with a primary focus on supporting user-side products across diverse web/mobile/desktop platforms, and coordinating full-stack systems.

Responsibilities:

- Responsible for the construction of TikTok LIVE ecosystem, with a primary focus on 3D model rendering, animation implementation and interactive effect implementation

- Stay at the forefront of industry trends in rendering technologies, proposing and implementing innovative solutions to enhance our products, optimizing rendering performance on mobile devices

- Collaborate with cross-functional teams, including business developers, as well as UX/UI designers, to transfer technical exploration into real-world features

- Conduct thorough troubleshooting and debugging of issues, collaborating with the QA team to ensure the highest quality and robustness of code

- Contribute to decision-making processes and development of rendering infra tools or workflows or platforms aimed at improving overall efficiency

Qualifications

- BS/MS degree in Computer Science equivalent majors with experience in native iOS development

- Proficiency in Objective-C or Swift with the ability to understand and debug large scale codebase

- Solid foundation and high proficiency in 2D/3D graphics rendering and animations

- Strong collaboration and problem-solving skills, clear documentation - Live-streaming related knowledge is a plus but not mandatory

Preferred Qualification

- Strong on WebGL, GLSL, Three.js etc - Experience with Cross-Platform frameworks, such as React Native, Flutter

- Experience with advanced techniques in real-time rendering, character animation, physics simulation and geometry modeling - Experience with modern graphic pipelines

- Experience with low-level performance profiling and optimization on mobile devices

- Experience with DCC software such as Blender, C4D and game engines such as Unity, Unreal

TikTok is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At TikTok, our mission is to inspire creativity and bring joy. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

#LI-JG1

Technical Sales Manager, Test & Measurement (Box & Systems Business)

About the Role:

As an Account Manager, you'll be responsible for driving sales of cutting-edge Test & Measurement solutions. You'll work closely with key customers in the aerospace, satellite industries.

Key Responsibilities:

• Customer Relationship Management: Build and maintain strong relationships with key accounts.
• Sales Strategy: Develop and implement effective sales strategies to achieve sales targets.
• Technical Expertise: Demonstrate a deep understanding of product portfolio – Box & Systems Business.
• Market Knowledge: Stay up-to-date with industry trends and customer needs.
• Business Development: Identify new business opportunities and expand our market reach.
• Customer Support: Provide excellent customer support, including technical assistance and troubleshooting.

Qualifications:

• Bachelor's degree in Electrical/Electronics Engineering, Telecommunications, or a related field
• 3-5 years of experience in sales or business development in the Test & Measurement industry
• Strong technical skills & background in RF testing, Radar Technologies & Satcom related testing

Please forward resume to [email protected]

· 8 years of experience working with Java ecosystem.

· Very good understanding of application system design, development, testing, deployment and maintenance

· Frontend development experience with Vuejs or Angularjs

· Experience developing web service - REST, gRPC

· Good knowledge of different design patterns

· Working experience with Agile Methodology in at least on project

· Good knowledge and understanding of the following:

o Maven

o Git

o CI/CD tools like Jenkins and Gitlab CI

Good to have experience with:

o Containers (Docker)

o Kubernetes

o Messaging Systems (Kafka, RabbitMQ, WebsphereMQ)

o Relational Database

o NoSQL Database

Job Responsibilities

• Writing of technical documents for inquiry and purchase order for equipment packages as per project specification, requirements of industry codes and standards, classification society rules and all relevant regulatory.
• Evaluates the technical aspects of bids received from suppliers and concludes technical assessment. Make clarification, evaluation and technical comparison of providers' bid, technical analysis of offers.
• Assists in placing and executing the orders.
• Review of supplier documents (such as data sheets, drawings) for their completeness, accuracy and compliance.
• Ensures all technical requirements incorporated in engineering deliverables. Reviews and validates with various disciplines and stakeholders.
• Approaching and coordinating with vendors for package solutions.
• Follow-up of vendors and conduct of clarification meetings.
• Provides engineering support and advice for quality work at supplier shop, construction or commissioning work at site.
• Have relevant experience in FPSO.

Job Requirements

• Degree in Engineering disciplines
• At least 5 years of relevant working experience in marine/ offshore industry
• Well versed with regulatory and class requirements.
• Possess good communication and interpersonal skills.
• Able to work in a team.
• Proficient in Microsoft Office and engineering design software (e.g. S3D, Autocad)

Responsibilties

• Lead the engineering teams within the verticle
• Evaluating and analyzing existing processes and procedures to identify areas of improvements
• Oversee the projects by planning, prioritizing tasks, resource allocation, giving instructions, reviewing code and implementation
• Collaborate with Product Managers, Designers and other key stakeholders to deliver on key priorities
• Strategic thinking to deliver end-to-end user experience solutions with a focus on user needs and business goals

Requirements

• 6-10 years of software engineering experience
• Degree in computer science, information security, or a related subject
• Familiarity with backend development related technology stacks
• Experience leading design and implementation of a highly scalable web services
• Strong interpersonal and communication abilities work successfully with stakeholders
• Great time management skills while working under tight timeline
• Strong analytical and problem-solving skills
• Ability to communicate in mandarin with our stakeholders would be an added advantage

We are looking for a talented React Native Developer to join our team and help build high-performance mobile applications for both Android and iOS platforms. In this role, you will design, develop, and maintain these applications, working closely with team members across various infrastructure layers. A commitment to collaborative problem-solving, advanced design, and delivering high-quality products is essential.

Responsibilities:

• Collaborate with product managers to discuss requirements and develop business modules using the React Native framework. Work closely with QA to ensure high-quality product releases.
• Implement native modules for JS layer use.
• Work closely with the backend team to implement dependent features in the app.
• Continuously optimize and improve the performance, stability, and scalability of mobile applications to enhance user experience.
• Integrate third-party SDKs and release products across multiple platforms.
• Participate in the selection, design, and implementation of technical solutions, and solve technical challenges in the project.
• Contribute to establishing related technical standards, and documentation, and conduct code reviews.
• Maintain, optimize, and enhance the mobile logging system and Jenkins to improve development efficiency.
• Provide technical support for the live app during non-working hours.

Requirements:

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• 3 years of experience in mobile development.
• Proficient in TypeScript, React, React Native, and Expo.
• Familiar with Redux, MobX, or Zustand, with hands-on experience in at least one.
• Proficient in at least one native development language (Kotlin/Java/Swift/Objective-C)
• Familiar with common algorithms and data structures.
• Skilled in using Git for code management. Strong understanding of common design patterns and architectural design principles, with a high standard for code quality, maintainability, and performance.
• Solid grasp of fundamental computer science concepts and adept at solving complex technical problems.
• Excellent communication and teamwork skills, quick thinking, and a willingness to share knowledge.
• Capable of independently designing and completing unit tests, and participating in code reviews.
• Experience in large-scale app project development is a plus.