Job Description

• Prepare single-line schematics in AUTOCAD.
• Amend layout drawings and detail drawings.
• Assist in preparing project submission DWGS.
• Assist in material take-off.
• Assist in compiling the material list.
• Assist in preparing tender documents for submission.

Requirements

• Degree or diploma in mechanical engineering/material engineering.
• 2 years of relevant experience in the construction industry. Working experience in the water or wastewater industry will be an advantage.
• Fresh graduates are welcome.
• Be familiar with AUTOCAD and Bentley software.
• Must have advanced computer literacy, especially in Excel.

Network Operations

1. Manages the set-up and coordination of TV transmission traffic in real time.

2. Acts as the first level support, and point of contact, for equipment, and the broadcast network.

3. Fully responsible for operating Eurovision's satellite, fibre and IP network.

4. Oversees the quality of transmission signals and reports to the Senior Network Operations Engineer.

5. Detect and correct any anomalies or faults in transmissions.

6. Allocates resources and services to customer on a short notice basis.

7. Reports faults/modifications on equipment in the Eurovision Control room, or at any important technical point across the network.

8. Takes the temporary measures required in order to ensure the continuity of service.

9. Ensure customer satisfaction, and have the appropriate behaviour in all situation.

10. Assures a consistent and high quality of service, through monitoring, and ensuring service integrity.

11. Enters real transmission times used for invoicing services.

12. Is responsible for capturing incident logs in the relevant operating system in order to follow up internally with support teams, and externally for customer reporting.

13. On night shifts maintains full responsibility for network traffic and can take all necessary measures to ensure continuity in the network.

Special Projects

1. Can participate in event projects to provide technical guidance, and engineering solutions.

2. Can be required to take part in outside missions; as a technical coordinator, engineer, and engineer in charge.

3. Upon Manager request other tasks can be added.

Working Conditions

1. Shift work from 0630 – 1430 and 1400 – 2200 hrs GMT+8.

2. Will be expected to work independently most of the time.

3. Will have to support head office, regional and international bureaus.

Suitably qualified candidates are invited to submit your detailed resume indicating qualifications, working experience, current and expected remuneration package, available commencement date, and contact number.

All applications will be treated in strictest confidence and only shortlisted candidates will be notified.

By expressing an interest in joining us, you agree that personal data you submit to us may be collected, used and disclosed by the Company and our service providers and agents for the purpose of processing your job application, including evaluation of your suitability, background screening, contacting you regarding your job application, and notifying you of future career opportunities. You warrant that where you have disclosed personal data of individuals (e.g. next-of-kin, friends or referees) to us and our service providers and agents in connection with your job application, you have obtained the prior consent of such third parties for us and our service providers and agents to collect, use and disclose for the above purposes, in accordance with any applicable laws, regulations and/or guidelines. You also acknowledge that in the course of the collection, use and disclosure described above, relevant personal data may be transferred outside of Singapore.

As a Service Engineer, you have to attend to equipment fault at customers’ premises. Liaise with the customer and sub-contractors regarding all aspect on the add-on project activities. Monitor the progress of the work done closely in order to ensure that the schedule and quality of work are met. Also to ensure that all materials and equipment are delivered on time as per schedule for site installation or rectification of fault. To carry out periodic maintenance for our customers.

You should possess a Diploma in Electronics and/or Electrical Engineering with 2-3 years’ hands-on experience in troubleshooting of card access systems, alarm systems, CCTV, etc. With good interpersonal communication skills and a valid Class 3 license. Stand-by duty is required.

Please submit resumes to [email protected] with the following

details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

Data Engineer - Talend ETL

• Required skills:
• Experience with Talend, Python and Spark
• Experience in Database and Hadoop (Hive, Impala, HDFS)
• Understanding of data-warehousing and data-modelling techniques
• Using the Talend ETL toolset, to create new and maintain existing ETL jobs.
• Design and implement ETL for extracting and transforming data from diverse sources, such as: Cloudera, PostgreSQL, and SQL Server databases.
• Design and develop database tables necessary along with the necessary constraints as per the requirement.
• Collaborate with Team members to understand source system structures and data retrieval methods/techniques, and tools within the organization.
• Support the development of data transformation logic using ETL tools or scripting languages like SQL, Python.
• Clean, validate, and transform data to conform to target schema and quality standards.
• Work with the Team to execute data quality improvement plans.
• Participate in troubleshooting activities to maintain data integrity and process efficiency.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

Recruitment Manager

Hand Phone: +65 92333815

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Mon to Fri 9am to 6pm

Summary:

• Provide support and manage project

• Follow up with clients in timely manner

• Assist sales team with site survey & system design

• Provide onsite support to diagnose and rectify technical issue

• Outline budget based on requirements and tracking costs to deliver project on budget.

• Prepare detailed project plan to schedule key project milestones, workstreams & activities.

• Manage delivery of the project according to project plan.

• Track project and providing regular reports on project status to project team and key stakeholders.

• Manage and adjust for any changes in project scope, schedule and/or budget.

• Managing the relationship and communication with the client and all stakeholders, ensuring the project is delivered to their satisfaction.

Additional Information:

• Relevant educational qualifications in Diploma or Degree in Computer Science / Information Technology

• At least 1 year experience in handling software projects

• Good understanding of programming , new technology trends / applications etc and with .basic cybersecurity & network knowledge.

• Proficient in Windows, Word, Power Point, Excel, and Access

• Able work independently and with other both indoor and outdoor locations

• Effective interpersonal skills for working in a team environment

• Able to work with deadlines and pressure

• Good working attitude and self-motivated

Job Description:

• Identify and troubleshoot issues in circuit boards using testing tools like oscilloscopes and multimeters.
• Perform visual inspections and utilize specialized tools to find defects or faults on the board.
• Solder and desolder components to replace damaged or malfunctioning parts.
• Use rework stations and hot air tools for efficient component removal and replacement.
• Conduct functionality tests on repaired boards to confirm they meet required standards.
• Keep comprehensive records of repair work, including fault details and resolution steps.
• Capable of adjusting PCB design to address component obsolescence.
• Keep current with new repair methods and tools.
• Engage in training sessions and workshops to advance technical skills.
• Parts teardown, re-assembly, re-certification and qualification
• Troubleshoot PCB Electronics

Requirements:

• Miniumum Diploma / Degree in Electronic/Electrical Engineering
• At least 4 years of experience in troubleshooting of PCB Re / Semiconductor Components.
• PCB repair and maintenance in a huge advantage.
• Strong diagnostic and troubleshooting skills.
• Excellent communication and customer service skills.
• Ability to work independently and in a team environment.
• Familiarity with industry standards and best practices for PCB maintenance.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Build and optimizing ‘big data’ data pipelines, architectures and data sets.

To support migration of data from Hadoop platform to Snowflake.

Performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.

To support and develop Data modeling, Data mapping activities.

Strong analytic skills related to working with unstructured datasets.

Build processes supporting data transformation, data structures, metadata, dependency and workload management.

Manipulating, processing and extracting value from large disconnected datasets.

Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.

Perform CI/CD Activities, Deployment activities in both cloud and on premises or as required.

Requirements

Experience with Data engineering tools (Python, Spark (Scala or Python), Hadoop).

Experience with relational (oracle, MySQL, MS Sql) or NoSQL databases, including Postgres and Cassandra.

Experience with data pipeline and workflow management tools.

Experience with stream-processing systems: Storm, Spark- Streaming, etc Experience with object-oriented/object function scripting languages: Python, Java, C++, Scala,etc

Experience on Cloudera/ Data bricks/ Snowflakes platforms will be added advantage

Experience with Cloud (Aws, Azure or Google).

JOB SCOPE

Responsible for executing the company projects in mechanical & electrical works in building construction which covers:

• Review project specifications and technical clarifications
• Prepare method statements and check drawing discrepancies
• Carry out project planning, design, material requisition, cost control, project supervision and documentation
• Supervise the M & E works and coordinate with client’s representatives, consultants and sub-contractors on technical matters
• Ensure timely and smooth progress of works
• Ensure quality of works is achieved and safety & environmental regulations are complied with
• Ensure project activities complied with the Company’s ISO system

JOB REQUIREMENTS

• Minimum 5 years relevant experience of M & E works
• possess a degree from universities in mechanical or electrical engineering, recognized by the Professional Engineer Board to be overall in charge of all M&E trades.
• Use of Autocad would be an advantage
• Proficient in using Microsoft Office
• Good communicative skills, able to interact with people of all levels and teamwork

Our clien is looking a experience analog chip designer engineer, this candidate must have at least 3 year work experience in similar role.

Your job responsiblities are:

-Use simulation tools to predict circuit behavior, identify potential issues.

- Design and develop high performance digital standard cell libraries tailored to meet critcal design specification, performance, power consumption.

- Work closely with layout design team to ensure accurate and efficient implementation of the physical layout of both analog and digital standard cells.

- Competent in PERL, TCL, Python and C++.

- Proficiency in schematic Capture & Simulation ( Cadence Virtuoso, Spectre)

• Build and optimizing ‘big data’ data pipelines, architectures and data sets.
• To support migration of data from Hadoop platform to Snowflake.
• Performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement.
• To support and develop Data modeling, Data mapping activities.
• Strong analytic skills related to working with unstructured datasets.
• Build processes supporting data transformation, data structures, metadata, dependency and workload management.
• Manipulating, processing and extracting value from large disconnected datasets.
• Working knowledge of message queuing, stream processing, and highly scalable ‘big data’ data stores.
• Perform CI/CD Activities, Deployment activities in both cloud and on premises or as required.

Requirements

• Experience with Data engineering tools (Python, Spark (Scala or Python), Hadoop).
• Experience with relational (oracle, MySQL, MS Sql) or NoSQL databases, including Postgres and Cassandra.
• Experience with data pipeline and workflow management tools.
• Experience with stream-processing systems: Storm, Spark- Streaming, etc Experience with object-oriented/object function scripting languages: Python, Java, C++, Scala,etc
• Experience on Cloudera/ Data bricks/ Snowflakes platforms will be added advantage
• Experience with Cloud (Aws, Azure or Google).

Overview

Microsoft Cloud Operations and Innovation (CO&I) is the team behind the cloud. Within CO&I, the Datacenter Engineering (DCE) team is responsible for delivering core datacenter infrastructure for Microsoft’s cloud business. The MS portfolio consists of complex, multi-disciplinary, large scale, multi-year datacenter construction and lease projects. We are looking for a passionate, high-energy individual to help build the cloud datacenters that power the world’s largest online services.

In alignment with our Microsoft values, we are committed to cultivating an inclusive work environment for all employees to positively impact our culture every day.

Responsibilities

The APAC Datacenter Engineering Senior Mechanical Engineer will be part of the team responsible for the development of Microsoft’s industry-leading datacenter designs.

This position is a Subject Matter Expert providing key input to other organizations and stakeholders. The successful candidate will be a professional mechanical engineer with extensive experience in datacenter mechanical engineering (HVAC, Plumbing, Fire Protection, Fuel Oil and BAS systems), design, construction, and operations. This individual will also review and coordinate the delivery of complex datacenter mechanical systems, associated controls, and overall topology.

The SME will be responsible for:

• Design decisions related to datacenter projects including new construction, expansions, retrofits and upgrades and standards upgrades in the APAC region.
• Detailed understanding of mission-critical datacenter HVAC cooling systems, cooling equipment selection, plumbing systems, fire protection systems, fuel systems and mechanical Building Automation System (BAS) controls.
• Responsible for overseeing the specification and drawing development detailing all mechanical systems
• Critical assessments of designs and decisions and support in applying the required standards and country-specific regulations to make the best design choices.
• Engage and manage external design consultants, run design workshops to ensure they deliver a design to meet the requirements of the Basis of Design (BOD).
• Collaboration with Global Technical Excellence team, Global Strategy team and DC Operations teams to develop datacenter designs from Basis of Design (BOD) to Issue For Construction (IFC) and through the Construction Administration phase of the datacenter until handover for new project build outs.
• Interface closely with the procurement team, the manufacturers, and the global and local engineering teams to deliver the mechanical solutions needed for each project.
• Assisting Operations teams with mechanical system solutioning and working with Operations and equipment vendors for implementation as well as assisting in commissioning activities to validate performance, quality, and reliability.
• Some travel to sites for “Factory Witness Testing”, consultant/vendor interaction in the design process, as well as for final commissioning of the installed systems.
• Collaboration with internal and external customers, lead the direction of the mechanical designs and oversee the delivery of multiple, concurrent, complete datacenter design solutions aligned with scopes, schedule and budgets of the projects.
• Supporting requests, liaise with customers to develop specific project design requirements, liaise and collaborate with other Microsoft engineering teams and Operations providing support as and when required for new and existing datacenters.

Qualifications

• Bachelor's Degree in Mechanical Engineering, or related field AND 4+ years related technical engineering experienceOR Master's Degree in Mechanical Engineering, or related field AND 3+ years related technical engineering experience OR Doctorate in Mechanical Engineering, or related field OR equivalent experience.
• Related technical experience in consulting engineering / construction / operation which involves design, engineering, construction, operation or maintenance of large scale and complex mission-critical mechanical (HVAC, Plumbing, Fire Protection, Fuel Oil, BAS) systems
• Technical understanding of mission critical environments.
• Strong experience with the operation and maintenance of building cooling and related mechanical systems (HVAC, Chilled Water, DX Refrigerant, Evaporative, and related controls systems)
• Knowledge of construction techniques and terminology including the ability to read and interpret blueprints, construction drawings and documents is essential.
• Familiarity with CFD modelling
• Sound knowledge of building codes and regulations.
• Ability to perform complex business case analysis to justify technical decisions
• Ability to lead teams of engineers in advanced engineering and operational processes and procedures as they relate to large datacenter environments
• Must possess strong leadership competencies and willingness to collaborate and work cross- functionally to maximize business results and positive customer experiences
• Experience managing both internal and external vendors, with a proven ability to manage and monitor progress to ensure objectives are achieved for outsourced project efforts
• Strong interpersonal, communication, and presentation skills at varying levels of business up to and including business executives
• Ability to manage, prioritize and successfully execute multiple concurrent mission-critical infrastructure projects
• Excellent analytical and organisational skills.
• Be a person of integrity, be methodical, detailed-oriented with a strong work ethic.
• Excellent problem solving, judgement, team building and decision-making skills.
• Ability to travel domestically and internationally.

Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to, the following specialized security screenings: Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.

While not required, we also look for the following Preferred Qualifications:

• Bachelor's Degree in Mechanical Engineering, or related field AND 8+ years related technical engineering experienceOR Master's Degree in Mechanical Engineering, or related field AND 6+ years related technical engineering experience OR Doctorate in Mechanical Engineering, or related field AND 3+ years related technical engineering experience OR equivalent experience.
• Professional Engineer or Registered Engineer

Benefits/perks listed below may vary depending on the nature of your employment with Microsoft and the country where you work.

Microsoft is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, read more about requesting accommodations.

What will you do?

• Takes ownership for validating the project’s statement of work and contract terms with the customer, including both technical and commercial elements, becomes lead contact for customer for balance of project order. (Project Initiation).
• Develops a project schedule and communicates with the customer to ensure expectations are being met. Direct engagement with internal manufacturing facilities and third party vendors. (Project Planning).
• Monitor the execution of the customer’s project order, verifying execution of the project through kick-off meetings, communication to all parties and exchange of technical requirements and project plan information, performance of factory acceptance, site acceptance, site energization preparation. (Project Execution)
• Lead the monitor and control of the performance of the customer’s project through its lifecycle. Key activities include task completion verification, project team monitoring, managing the exchange of project updates across the project team members, schedule reporting, issue resolution, and contract administration. (Monitor and Control Project Work)
• Lead the closeout of the customer’s project to include financial reconciliation, verification of job site equipment arrival, installation, start-up, and training support completion through review of internal system information, contact with the customer, and coordination with support services such as field services, after-shipment support, and training functions. (Project Close)
• Compares/differentiates/propose alternate products with additional customer value compared to competition.
• Solves problems with customer interaction that results in positive feedback and improved relationship.
• Utilizes a base knowledge of Schneider Electric products and their use would be an advantage and demonstrates an understanding of the fundamental knowledge, processes and terminology needed for effective project management.
• Manage, control and supervision of site activities, including preparation of method of statement, site risk assessment, liaise with customer’s safety personal and provide guidance and instruction to vendor for installation, testing and commissioning

What qualifications will make you successful?

• Diploma / Degree in Electrical Engineering or Equivalent.
• 3-5 years proven track record in managing electrical equipment and package projects
• Familiar with standards and regulatory requirements.
• Commercial and legal implications of contracts.
• Good understanding of budgeting and financial implications, including cash flows
• Proficient in English and computer literate.
• Good knowledge of contract law and trade documents, project management.
• Good knowledge of electrical distribution systems and standards.
• Proactive & able to work independently.

• Hand on install automation machines & systems with meeting planned project & production schedule.
• Maintain and suggest improvement for existing automated production lines.
• Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.
• Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.
• Coordinate with internal team (Sales, Quality, Project, Production, maintenance) and external supplier to make projects successful.
• Participate of root cause analysis of product failure within cross functional team.
• Prepare machines preventive maintenance check list and train operation & maintenance staffs.
• Monitor automation system performance and provide support & perform service production automation line when necessary.
• Any other duties as and when assigned.
• Adhere to workplace health and safety. Abide by all EHS policies and procedures

Requirements

• Diploma of Engineering in Automation / Mechanical /Mechatronics / or equivalent. Fresh graduates are welcome, on job training will be provided.
• ITE with serval years’ experience are welcome.
• Experience in automation machine design are advantages.
• Hands-on experience of electrical and mechanical assembly & installation
• Knowledge on Mechanical/Mechatronics/Electrical components.
• IT skills (MS Office)
• Communicate well in English

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

DUTIES

· Plan and manage manufacturing processes from raw material receipt to finished

· part shipment.

· Create or revise work instructions and develop new processes according to

· Engineering drawings and standards.

· Design Jig & Fixture to support CNC section.

· Develop Advanced Product Quality Planning, carry out associate training and a

pre-production trial project.

· Assist Production in fulfilling technical and quality requirements.

· Manage technical changes to fulfill customer requirement.

· Providing assistance with the RFQ proposal process and development.

· Any other ad hoc duties as assigned.

REQUIREMENT

· Diploma/Degree in Mechanical / Precision Engineering or other relevant discipline.

· Minimum 3 years of experience as a process engineer in the Manufacturing

industry or equivalent.

· Experience with Master-CAM Programming are preferred.

· Experience of hands-on CNC Milling/Turning fabrication.

· Good problem-solving skills.

· Proficient in Microsoft Excel functions.

· Systematic and meticulous in approach.

· Good communication skills & acts as a team player in a small dynamic team.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer to be part of our Etch diverse team of talent. You will be responsible to manage the integration of all modules' processes and the respective derivatives.

What you will be working on:

• Responsible for new Process Development and/or Process Transfer
• Process optimization for Yield and Productivity improvement
• Troubleshoot and resolve Process related issues
• Sustain and/or improve Process Capability, CpK
• Qualify and release tools for required MFG capacity
• Qualify alternate sources for Cost improvement
• Plan and execute Engineering Projects
• Continuous improvement through participation in 10k idea, LSS & BKM to create cost effective and robust processes with quality
• Setup, monitor and maintain SPC charts
• Adhere and complete necessary documentation

More about you:

• Bachelor Degree in Engineering / Science or equivalent
• 1-3 years relevant experience in Semiconductor manufacturing environment
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for QA/QC Engineer (Contract) to make an impact! In this role, you will be accountable to build and drive the quality processes, execution and teams for its Data Centre projects in APAC. You will work closely with the project sponsors and project management team to define the project objectives, create a plan for executing those objectives. Dependant on the systems demand, the role will include working on multiple projects or directly on a single specific project in APAC.

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Ensure Quality-related activities on the Project are compliance to Corporate, Project, and other applicable Regulatory requirements.
• Implement BIM360 QA/QC dashboards to show overall KPI metrics and status, and manage documentation tracking, distribution and submission through various collaboration tools.
• Generate Project high-level Plans/Guidelines to provide roadmap for key Quality related activities.
• Ensure knowledge transfer / lessons learnt of execution issues to local customer & SE teams. Ensure compliance to overall program.
• Ensure adequate and suitably qualified Quality team resources are available to support Project Quality requirements.
• Involve in Project Review in conjunction with Engineering/Construction phases of the Project and ensure appropriate closure of observations/issues raised from review, generation of final review closeout report.
• Ensure Project SOP’s/Plans/Guidelines are appropriately authorized for implementation and adequate training provided.
• Develop, implement and manage an effective Audit Schedule focusing on the key work processes, and design activities undertaken during the project lifespan.
• Review and approve Quality Records/Reports, Engineering Drawings, Change Notices/Design Modifications, Quality Plans, Inspection Test Plans, etc.
• Conduct and maintain training program for relevant project personnel for Project SOP’s/GDP/GEP applications.
• Continually identify and proactively manage project risks and issues, ensure execution of corrective action plans up to closure.
• Implement systematic documentation turnover system for all Project Quality related documentation.
• Manage day-to-day activities of the Project walk down teams.
• Plan, prepare, review and execute project system walk down packs to transfer punch items into Master Punch list database (BIM360), approval and issuance of Construction Completion Certificate.
• Provide support and advice on Quality-related issues and resolution of engineering-related disputes.
• Responsible for any other related QAQC matters as requested by management.
• Be seen as the trusted advisor for our customer.

What qualifications will make you successful?

In this role practical experience will carry a high weighting than formal qualifications: -

• Bachelor’s Degree in Engineering or any other related discipline from recognized university.
• Minimum of 5 years of relevant work experience in BMS, HVAC, or Industrial Controls / Automation industry.
• Has an excellent working knowledge of the technical and operational environment in which the project deliverables are created and in which they are used.
• Must be an excellent communicator at all levels both internal and external in the project environment, be proactive and exhibit strong leadership qualities and be able to adapt to a dynamic and geographically disbursed environment.
• Position is to be base at client’s site.
• Able to commit to the full duration of the contract

What's in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee
• Worldwide Employee Stock Ownership
• ...... and more!

Let us learn about you! Apply today.

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

The NPI / Production Process Engineer is required to collaborate with the Program Management Team

and be involved in New Product Introduction activities and the creation of manufacturing Work

Instructions as well as other process documents. The incumbent is also expected to improve the work

processes actively and continuously to achieve high productivity and quality.

Key Responsibilities:

 Early involvement in NPI (New Product Introduction) activities.

 Interpret technical information (documents, drawings, and data) and analyse the manufacturing

process elements.

 Create Bill of Materials structure.

 Create manufacturing Work Instructions and other process documents in collaboration with the

Program Management, Production and Quality Assurance Teams.

 Carry out time studies and update the process cycle times.

 Provide timely technical support to the Production Team pertaining to manufacturing process and

quality issues.

 Engage in DFM and Lean Line Design activities.

 Relentlessly explore, evaluate, and review new tools, equipment, processes, etc.

 Actively and continuously improve the work processes to improve work efficiency and quality.

 Work with Program Management, Production, and Quality Assurance Teams to identify potential

process risks and make recommendations to mitigate these risks.

 Any other ad-hoc tasks as assigned by the Manager and/or Engineering Lead.

Skills & Qualification:

 Minimum Diploma in any Engineering field such as Electrical, Mechanical/Mechatronics,

Manufacturing/Production or industrial Engineering

 Min. 3 years of manufacturing process engineering experience, preferably dealing with wire or cable

harness. Candidates with less experience may be considered for the Asst. Engineer position

 Ability to read and interpret technical documents and drawings

 Basic manufacturing knowledge in cable harness assemblies, plastics and sheet metal preferred

 Experienced in the creation Bill of Materials structures

 Good knowledge on Solid Edge or SolidWorks preferred.

 Proficient with Microsoft Outlook, Excel, Word and PowerPoint

 Lean/Six Sigma certification is desirable

 Strong analytical ability

 Team player with good communication skills

Visa’s Technology Organization is a community of problem solvers and innovators reshaping the future of commerce.   We operate the world’s most sophisticated processing networks capable of handling more than 65k secure transactions a second across 80M merchants, 15k Financial Institutions, and billions of everyday people.   While working with us you’ll get to work on complex distributed systems and solve massive scale problems centered on new payment flows, business and data solutions, cyber security, and B2C platforms.     

The Opportunity: 

We are looking for Versatile, curious, and energetic Software Engineers who embrace solving complex challenges on a global scale.  As a Visa Software Engineer, you will be an integral part of a multi-functional development team inventing, designing, building, and testing software products that reach a truly global customer base. While building components of powerful payment technology, you will get to see your efforts shaping the digital future of monetary transactions.   

The Work itself: 

• Design code and systems that touch 40% of the world population while influencing Visa’s internal standards for scalability, security, and reusability 
• Collaborate multi-functionally to create design artifacts and develop best-in-class software solutions for multiple Visa technical offerings 
• Actively contribute to product quality improvements, valuable service technology, and new business flows in diverse agile squads 
• Develop robust and scalable products intended for a myriad of customers including end-user merchants, b2b, and business to government solutions. 
• Leverage innovative technologies to build the next generation of Payment Services, Transaction Platforms, Real-Time Payments, and Buy Now Pay Later Technology 
• Opportunities to make a difference on a global or local scale through mentorship and continued learning opportunities 

Essential Functions:

• Demonstrates relevant technical working knowledge to understand requirements.
• Identifies and contributes to the development and solution strategies to team members that improve the design and functionality of interface features across one or more project features, under minimal guidance.
• Applies standard processes on the use of programming languages (e.g. HTML, C++, Java) to write code that fulfills website modification requests and technical requirements. 
• Collaborates with others to support the piloting of new technology capabilities and features that enhance the user website experience across e-commerce products.
• Analyzes bugs for simple issues and applies debugging tools to verify assumptions.

The Skills You Bring:

• Energy and Experience: A growth mindset that is curious and passionate about technologies and enjoys challenging projects on a global scale
• Challenge the Status Quo: Comfort in pushing the boundaries, ‘hacking’ beyond traditional solutions
• Language Expertise: Expertise in one or more general development languages (e.g., Java, C#, C++)
• Builder: Experience building and deploying modern services and web applications with quality and scalability
• Learner: Constant drive to learn new technologies such as Angular, React, Kubernetes, Docker, etc.
• Partnership: Experience collaborating with Product, Test, Dev-ops, and Agile/Scrum teams

**We do not expect that any single candidate would fulfill all of these characteristics. For instance, we have exciting team members who are really focused on building scalable systems but didn’t work with payments technology or web applications before joining Visa

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs. 

Responsibilities:

• Develop scalable application using Spring Boot, Redis, MongoDB, Docker, Openshift/Kubernetes

• Work with business stakeholders to define/clarify project requirements and acceptance criteria, define success metrics for

features to be delivered

• Support existing applications including troubleshooting, bug fixing, required upgrades and modifications to existing functionality

• Improve & managing the deployment pipeline (devops)

• Improving Application Reliability

Requirement:

• Bachelor's or advanced degree in computer science, engineering

• 6+ years of hands-on programming/application development experience in JAVA, Spring Boot, REST/API

• Experience in building cloud native applications, microservices and cloud platform (Openshift / Kubernetes)

• Proficiency in MySQL/MariaDB or other RDBMS databases

• Experience in Redis/MongoDB & Experience in Unix/Linux

• Good communications skills

• Proficiency in reading and writing technical requirements

• Proficiency in Git and Bitbucket

• Strong knowledge in automated build pipelines like Jenkins using Groovy

• Development experience under an agile development methodology and process

• Maintain, manage and modify all software systems, tools, and applications.
• Identify the areas of improvement to reduce time to delivery avoiding manual errors.
• Support version upgrade for the products and amend the scripts/process as and when required.
• Integrate with SMS/NaaS notification tool.
• Coordinate with developers to build and implement technology solutions.
• Excellent communication skills and problem-solving abilities are essential.
• Provide testing support to meet DITSCAP, DII COE, JTA-A, and DoD standards.
• Knowledge of databases, system security and troubleshooting recommended.
• Prepare required documentation to cover each SDLC stages (e.g. Functional spec, test cases etc).
• Enhance system to deliver Change workflow functionality
• Rollout the solution to all environments across different environments.

• Examining and solving production problems associated with the Oracle Tuxedo middleware platform.
• Addressing customer-reported technical problems.
• Creating codes to confirm the proper functioning of connections.
• Conducting data transfers and managing third-party connections.
• Designing and developing distributed applications using Oracle Tuxedo middleware platform
• Writing efficient, scalable, and reliable code in programming languages such as C, C++, Java, or COBOL to implement application logic
• Setting up and managing the Oracle Tuxedo environment involves configuring application servers, resource management, and performance optimization.
• Collaborating with cross-functional teams, including business analysts, system administrators, and database administrators, to gather requirements, design application architecture, and ensure seamless integration
• Developing and maintaining documentation for applications, including code comments, technical specifications, and system configurations
• Performing unit testing, debugging, and troubleshooting to ensure the applications meet functional and performance requirements
• Conducting performance tuning and optimization of Oracle Tuxedo applications
• Keeping up to date with the latest Oracle Tuxedo platform updates, technologies, and best practices in distributed application development
• Providing technical support and guidance to other team members and stakeholders
• Participating in code reviews and ensuring adherence to coding standards and software development best practices
• Bachelor's degree in Computer Science, Software Engineering, or a related field
• Proven experience in developing distributed applications using Oracle Tuxedo middleware platform
• Strong proficiency in programming languages such as C, C++, Java, or COBOL
• Familiarity with middleware concepts, distributed computing, and service-oriented architecture (SOA)
• Experience in performance tuning and optimization of Oracle Tuxedo applications
• Knowledge of database systems and SQL
• Excellent problem-solving and debugging skills
• Strong communication and teamwork skills
• Ability to work independently and manage multiple priorities in a dynamic, deadline-driven environment