• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have minimum 12 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas / Wind energy sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• Prepared electrical philosophies and specifications for electrical systems for concept, FEED, and detail engineering projects as necessary.
• Experience in electrical power system design and handling of power system studies.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabSys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.
• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Computer literacy in MS Office.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.

We regret that only shortlisted candidates will be notified.

Summary

The Apple Services Engineering (ASE) team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, Fitness+ and Apple Books. And they do it on a massive scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries. These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, nimble, and cross-functional, offering greater exposure to the array of opportunities here.

Description

As an SRE at Apple, you will work on world-renowned internet services that serve hundreds of millions of users worldwide. You’ll collaborate closely with development teams and other stakeholders in the entire lifecycle of services from inception through deployment and continuous refinement. Your responsibilities will include monitoring performance and availability, capacity and disaster recovery planning, defining Service Level Objectives (SLO) and ensuring the reliability and resiliency of systems. Join us if you thrive on solving large-scale problems through your expertise and collaborative team work.

• Support and lead cross functional projects across multiple services - Design, analyze and troubleshoot complex mission-critical distributed systems on a global scale.
• Provide OnCall support to 1st level production support teams.
• Participate in incident management and blameless postmortems.
• Detect and resolve performance bottlenecks, enhance service efficiency.
• Write clear technical documentation, production run books.

Apple is an Equal Opportunity Employer that is committed to inclusion and diversity. We also take affirmative action to offer employment and advancement opportunities to all applicants, including minorities, Women, protected veterans, and individuals with disabilities. Apple will not discriminate or retaliate against applicants who inquire about, disclose, or discuss their compensation or that of other applicants. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Minimum Qualifications

• BS degree in computer science or equivalent field with 5+ years or MS degree with 3+ years experience, or equivalent.
• At least 5 years in a Site Reliability Engineering, DevOps or infrastructure focused role
• Excellent written and verbal communication skills
• Experience in supporting internet-facing production services and distributed systems
• Experience in collaborating effectively across organizations, building strong relationships
• Proficient coding experience with Python or similar scripting languages
• Experience with containers and container orchestration platforms such as Docker and Kubernetes
• Experience with monitoring tools such as Splunk, Grafana, and Prometheus
• Demonstrated ability to deliver results on time with high quality
• Experience in managing and scaling distributed systems in a public, private, or hybrid cloud environment
• Experience in debugging Java code and optimizing JVM performance is plus.
• Understanding of the Linux Operating System, standard networking protocols, and components

Preferred Qualifications

• Passion for crafting and building reliable systems
• Strong sense of ownership and integrity proven through clear communication and collaboration
• Automation advocate - you truly believe in removing operation load with software
• Excellent troubleshooting and problem solving skills

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have a minimum 8 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Experience in electrical power system design and handling of power system studies.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.
• Prepared electrical philosophies and specifications for electrical systems for concept, FEED and detail engineering projects as necessary.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabsys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.

We regret that only shortlisted candidates will be notified.

ROLE DESCRIPTION SUMMARY

A Systems Engineer (Solutions)interfaces with customers and identifies their needs. A Systems Engineer (Solutions)with then work with various departments from network engineers, support and operations to ensure a plan is in motion to improve the customer's experience. A Systems Engineer (Solutions)works to balance various aspects of the project, from safety to design. Additionally, a Systems Engineer (Solutions)researches advanced technology regarding best practices in the field and seek to find cost-effective solutions.

Performs a subset of the system engineering activities required to develop a solution or product.

Analyses the customer’s and other stakeholders’ needs whatever the used means (e.g. advanced studies, simulations, mock-ups, models, prototypes, …)

- Describes the missions, functions and requirements on the sub-system

- Formalises the specification and the architectural design to develop the sub-system

- Prepares and performs the solution or product integration, verification and validation tests.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Engineer, you are accountable to:

• Perform the engineering requirements analysis
• Provides required technical documentation:
• Design Documents (Preliminary, Final)
• Statement of Works for suppliers and external contractors
• Input/output requirement for Interfaces Management
• Input for specialty engineering: RAMS, EMC/EMI, Cyber-Security.
• Input for Installation Management
• Operation and Maintenance documentation
• Training material
• Assists the bid team to scope and cost engineering work packages
• Work with contractors to produce costing, ensure that they deliver on time
• Reports and follow-up the KPIs for the sub-system
• Participate to progress meetings
• Analyse and Correct the Problem Changes Requests

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

QUALIFICATIONS

• Tertiary qualification in Computer Science, Information Technology, Electronics Engineering or related discipline (essential)
• Higher degree qualifications are desirable.
• Demonstrated engineering competencies required for qualification to INCOSE CSEP (or equivalent, or ASEP) are highly desirable.

ESSENTIAL EXPERIENCE

• Minimum of 5 years’ experience in an Engineering role
• Able to decipher technical scope from high level requirements
• Experience with Governmental and/or complex IT Projects
• Strong oral and written communications skills.

DESIRABLE EXPERIENCE

• Experience working on Software Security projects
• Experience working within a Systems Engineering lifecycle
• Knowledge of Thales Products and Processes
• Membership of relevant professional organisation, e.g. INCOSE, Institution of Engineers Singapore, etc.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

1. Conduct lab-based research and perform experiments.
2. Collaborate with colleagues both inside/outside the group.
3. Assist in daily lab management duties.
4. Present and report research results and publish scientific results in peer-reviewed journals in a timely manner.
5. Ensure compliance with environment, safety, health and quality program requirements from all levels (e.g. university, faculty of engineering and the department of MSE).
6. Translation and commercialization. Training will be provided

Job Requirements

A bachelor and a master degree in Chemical Engineering, Material Engineering or related field is required. The candidate should have 2-3 years of experiences in doing research.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry-partnered Ignition research project where you will be part of a collaborative team exploring innovative ways of characterizing the physical and rheological properties of liquid personal care products and understanding the impact of these properties in product design and process development.

Key Responsibilities

• In this role, you will perform shear and extensional rheological characterization of a large variety of liquid personal care products including lotions, topical oils, and more. We will explore innovative and emerging methods of rheological characterization and analyzing rheological data to extract material parameters to build a database of materials. Working with our industrial partner we will establish an understanding of rheological properties that are useful for product formulation and process design related to lab and larger scale extrusion/dispensing applications.More specific responsibilities include:
  • Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
  • Undertake development of rheological protocols and characterization of liquid personal care products
  • Formulate model materials with various additives to understand their impact on product rheology
  • Design, execute, and interpret experiments independently and with support from the PI.
  • Prepare and deliver written articles, reports, and presentations for industrial partners and external audiences.
  • Attend and present at regular group meetings to receive feedback on work done and future plans
  • Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
  • Coordinate procurement and liaison with vendors/suppliers.
  • Work independently, as well as within a team.

Job Requirements

• Have relevant competence in the areas of rheological characterization and analysis, wet lab work, material formulation
• Have a degree in pharmaceutical engineering, chemical engineering, mechanical engineering, food or materials science/engineering, or a related field. Possessing a Master’s degree will be advantageous.
• Knowledge of any of the following will be advantageous: material dispensing/extrusion processing, material science, textural and sensory analysis

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Salary - ($5,200 - $6,000)

Mon - Fri, 8am - 5:15pm

Job Description:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations

Job Requirements:

• Diploma/ Degree in Mechanical Engineering
• Minimum 2-3 years related work experience
• 2D & 3D CAD operations; strong in CATIA
• Proficient in Microsoft ( Excel / words / powerpoint )
• Good technical design and engineering background would be highly advantageous
• Solid work test will be conducted during interview

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description

• Reporting to Global Category Microcontroller & Memories (MCM), strive to secure “Best in Class” consistent and sustainable supplier quality performance to reach the Continental Business and Quality targets.
• Maintenance of the defined Supplier Quality Management System (procedures, guidelines, and tools) to ensure the requested quality is in line with the defined supplier management strategies to meet the quality targets.
• Execution of supplier evaluations and assessments to support the cross-functional supplier selection team with the required quality data.
• Driving supplier development & improvement activities at supplier's site.
• Initiation and introduction of the preferred supplier and components strategy.
• Design, initiation, and control of preventive quality management measurements in the design and development phase for supplied parts and services to ensure that our products meet the quality requirements defined.
• Component introduction through robust APQP process which include Component sourcing, writing of specifications, handling of qualifications and risk management.
• Manage change requests (PCN) from component suppliers and assure comprehensive qualification of any change.
• Support of the data system to collect and evaluate supplier quality related key performance indicators (KPIs) for the regular reporting of quality performance.
• Support for the continuous improvement process of all supplier quality-related processes, guidelines, and tools by means of supplier audits, on-site assessments, and benchmarking and best practice sharing programs.

Qualifications

• Degree in Electronics/Electrical Engineering (or related) with minimum 5 years’ experience, preferably in the automotive industry
• Candidates with experience in semiconductor processes (e.g., wafer process technologies, back-end assembly, and testing), knowledge in electronic component & qualification requirements (e.g., AEC-Q, JEDEC, IP qualification) preferred. Candidate with more work experiences may be considered for Principal role.
• Strong experience in quality systems, process audits and part qualification.
• Understanding of automotive practices such as APQP/PPAP/VDA6.3/IATF16949.
• Able to lead suppliers' development and audit activities within Asia.
• Able to work independently and travel frequently (e.g. SE-Asia, China, Japan & S. Korea).
• Strong interpersonal and communication skills e.g. in collaborations, problem solving process, conveying technical details and presentation.

Renumeration: ($3,000-$4,000)

15% of basic as monthly commission paid quarterly

Location: City Hall

Work Hours: Mon - Fri

Job Description

● Implement strategies to acquire new clients and expand the customer

base within the security and IT solutions industry

● Perform needs assessments to understand clients' security requirements

and recommend suitable solutions

● Maintain up-to-date knowledge of advancements in technology and the

company's product offerings

● Provide product demonstrations and compelling presentations to highlight

the benefits of solutions

● Craft tailored sales proposals that address clients' specific security needs

and emphasize the value proposition

Job Requirements

● A bachelor's degree in IT engineering, or related field is preferred. Additional technical qualifications in security systems or electronics are highly advantageous

● Demonstrated success as a sales executive in the IT or physical security industry, with specific knowledge of CCTV, access control systems (ACS), network technology

● Exceptional communication skills to articulate technical concepts to diverse audiences, strong analytical and problem-solving abilities to craft custom solutions, and proven negotiation expertise.

● An established network within the security industry is advantageous

● Experience with selling SaaS solutions (CRM, cloud-based ACS/VMS) is highly advantageous.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.
  

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. 2 years of relevant experience in similar field.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job Description

Your responsibilities:

• You will work include face-to-face and remote selling to both new and existing customers including selling directly to the end consumer/business purchaser or indirectly through various sales channels.
• You will assess customer needs and suggesting appropriate products, services, and/or solutions.
• You will be developing, delivering sales bids, presentations, proposals and conducting product demonstrations.
• You will identify, contact prospective customers, building relationships to generate future sales and repeat business Incumbents matching to this specialization are compensated based on achievement of sales targets.
• You will manage projects / processes, working independently with limited supervision, coach and review the work of lower-level professionals and problems faced are difficult and sometimes complex.
• Living Hitachi energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• University degree in Engineering.
• 3 to 5 years of working experience.
• Entry level candidates are welcome to apply.
• Ability to work collaboratively with employees within department and across functions.
• Possesses excellent interpersonal, communication, problem-solving skills and capable of working effectively under own initiative.

technical understanding requirement .

a) understands the drawings and scope of works

b) understands the implications of different technicalchoice so as to meet the project objectives

c) involve in providing value engineering solutions basing on his knowledge .

d) to have knowledge in the preparationof engineering proect proposals and method statements .

e) carry out project objectives so align with company goals.

f) to co-ordinate program and monitor site work , materials , plant and equipment .

g) involving in client /consultant / sub-contractor meetings .

h) to carry out short term planning to meet site progress .

g) shop / as build drawing preparation .

h) Assists project manager in monthly progree report

PROJECT ENGINEER (MARINE INDUSTRY)

Company background:

• One of Singapore’s established MNC company specializing within the Marine Industry providing integrated mooring and rigging services

Location: West (Clementi) - Company transportation provided from MRT

Working Hours: 5 Days Work Week, Mon to Fri (8.30am to 5.30pm)

Remuneration Package:

• Basic up to S$ 8500
• Variable Bonus

Job Responsibilities:

• Provide technical expertise to oversee the design, development and construction.
• Interface with system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the system.

Requirements:

• At least a Diploma or Degree in Mechatronic or its equivalent discipline
• Preferably possess at least 5 years working experience within the Marine Industry or Shipyard Environment
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System)
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting
• Understanding of structural design is an added advantage
• Fluent in software skills (MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD)
• Ability to use Primavera scheduling software will be an added advantage
• Comfortable in travelling overseas to oversee projects

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a Pharmaceutical Innovation Programme Singapore research project where you will be part of a collaborative team exploring innovative ways of understanding extrusion processing for pharmaceutical drug materials and products using rheological measurements.

Key Responsibilities

In this role, you will characterize mixtures of pharmaceutical excipients and drug materials to develop methodologies for screening hot-melt extrusion formulations and selecting optimal operating conditions using rheology, with the objective of producing amorphous-solid-dispersions. You will validate the developed processing space and operating conditions for extruded pharmaceutical formulations using a lab-scale extruder. In collaboration with researchers at the Singapore-MIT Alliance for Research and Technology (SMART), you will characterize the physical properties and performance of intermediate pharmaceutical drug products. The created methods will be transferred to the industrial partner to enhance their product development process using rheological characterization.

More specific responsibilities include:

• Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
• Undertake characterization of pharmaceutical active ingredients, polymeric excipients, and plasticizers for producing amorphous-solid-dispersions.
• Perform lab-scale hot-melt extrusion of pharmaceutical materials to validate predicted processing conditions and product outcomes.
• Collaborate with broader pharmaceutical research team at SMART.
• Design, execute, and interpret experiments independently.
• Author papers in high-quality journals in areas that are related to the research.
• Prepare and deliver reports and presentations for industrial partners
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaise with vendors/suppliers.
• Work independently, as well as within a team.

Job Requirements

• Have deep hands-on experience with at least one of the areas of polymer rheology, extrusion processing, pharmaceutical engineering with small molecules.
• Relevant competence in the areas of wet lab work, analytical instrumentation, material science and formulation
• Have an advanced degree in chemical engineering, mechanical engineering, materials science and engineering, or a related field.
• Knowledge of any of the following will be advantageous: rheology, physical characterisation, crystallisation, polymer melts, extrusion, material physics.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

As an NPI Engineer, you will be responsible for overseeing the transition of new products from design to full-scale production. You will work closely with cross-functional teams, including Product Development, Manufacturing, Quality, and Supply Chain, to ensure the smooth introduction of new products while maintaining efficiency, quality, and cost-effectiveness. Your role will be instrumental in implementing new processes, optimizing manufacturing methods, and ensuring product manufacturability.

Key Responsibilities:

• Product Introduction & Process Development: Collaborate with the design and engineering teams to evaluate product designs for manufacturability, scalability, and cost efficiency.
• Cross-Functional Collaboration: Partner with Product Development, Quality Assurance, and Supply Chain to define project requirements and timelines, supporting a seamless transition to manufacturing.
• Production Line Setup: Develop and implement production line processes, workflows, and assembly instructions to achieve quality and production targets.
• Process Validation & Optimization: Conduct process validation tests, analyze data, and implement adjustments to optimize production yields and reduce waste.
• Supplier Management: Work with suppliers to ensure components and materials meet required specifications and quality standards.
• Continuous Improvement: Drive continuous improvement initiatives for production processes, focusing on quality, efficiency, and cost savings.
• Documentation: Develop and maintain technical documentation, including process flow diagrams, PFMEA, work instructions, and BOMs.
• Troubleshooting: Investigate and resolve production issues, providing timely solutions to minimize downtime and production delays.

Qualifications:

• Education: Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or related field.
• Experience: 3+ years of experience in NPI, process engineering, or manufacturing engineering, ideally within precision engineering.
• Technical Skills: Strong understanding of production process development, validation, and troubleshooting. Experience with lean manufacturing principles and Six Sigma is a plus.
• Communication Skills: Ability to work cross-functionally and communicate complex technical information effectively.
• Analytical Skills: Proven ability to analyze data, identify trends, and make recommendations for process improvements.

Job description

• Design, develop, test, deploy, maintain and improve of software application

• Documentation of software design and description required in a software process life cycle

• Create and maintain documentation for software installations, changes and upgrades

• Involve in the setup and deployment of software for developmental, testing and operational use

• Manage individual project priorities, deadlines and deliverables

• Evaluate system architecture and make recommendations as required

• Perform peer-to-peer code reviews

Requirement

• Proficient in C, C#, NodeJS, Augular or ReactJS

• Familiar with working in Windows environment

• Good knowledge in Javascript / RESTful API / HTML5 / CSS3 / Typescript will be added advantage

• Good knowledge in SQL / NoSQL databases would be added advantage

• Good knowledge in Network Communication and configuration would be added advantage

• Team player with good interpersonal, written and verbal communication skills

Job Description:

• Perform electrical and mechanical assembly work for the semiconductor industry.
• Perform equipment assembly according to engineering drawings.
• Perform installation, repair, inspection, reassembly, refitting, and adjusting products as required.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Maintain work area clean, safe, and orderly.
• Perform repair pipe and plumbing if needed.
• Planning / Scheduling and coordination of M&E works.
• Oversee and ensure works are carried out by the approved drawings, materials, and method statements.
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Update maintenance daily schedule.
• Any other duties as may be assigned.

Job Requirements:

• Minimum 3 years of relevant experience in the Construction industry.
• Diploma/ Degree in Mechanical & Electrical Engineering or related fields.
• Strong building and M&E knowledge with hands-on experiences.
• Positive attitude, willingness to learn, and good team player.
• Entry-level candidates are welcome to apply.

Others:

• Working hours: Monday to Friday - 8:30 am to 5:30 pm
• Saturday - 8:30 am to 12:00 pm
• Salary range: $2500 - $5000 (Price Negotiation)