Job Responsibilities:

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports.
• Assist in Coordination and execution relating to the construction project.
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Assistants in monitoring projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
• Ensuring supervisors & foremen meet clients’ regulatory work requirements.
• To check and ensure compliance with TOP checklist
• Responsible for all inspection activities being carried out.
• Other ad hoc projects assigned

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 1-2 years relevant experience (open to entry level)
• Proficient in MS Office, AutoCAD, and BIM
• A team player and with a positive working attitude

JOB SCOPE & JOB RESPONSIBILITIES

• Drive the creation and refinement of piping layouts, material take-offs (MTOs), and 3D model evaluations for intricate piping systems.
• Analyse stress and vibration data, offering technical expertise and recommendations.
• Collaborate closely with multidisciplinary teams to ensure cohesive project progress.
• Oversee technical specifications, support standards, and material selection to meet project requirement.
• Conduct regular progress assessments and provide strategic recommendations for project requirements.
• Offer technical guidance during contruction and installation phases to ensure successful project outcomes.
• Mentor and guide junior engineers, promoting a culture of quality and efficiency in design.
• Any other duties as assigned by superior.

JOB REQUIREMENT

• Bachelor Degree in Mechanical Engineering or a related field (or equivalent experience).
• At least 10 Years of experience in piping design, stress evaluation, and construction engineering support, including 5 Years in a supervisory capacity.
• Proficient in AutoCAD and 3D modelling tools (eg., Navisworks etc)
• Strong technical knowledge of piping stress/vibration analysia, material selection, and system design.

Responsibilities:

• Work closely with business user and software/system architect.
• Gather and analyze requirement from stake holder, including business requirement document.
• Conduct technical feasibility study, analysis requirement specifications to design and architect solutions including developing proof of concepts.
• Translate business requirement into documented technical and data design specification.
• Perform code development, involve in code review, user acceptance testing and sign off.
• Perform implementation, provide post-implementation maintenance support and fine tuning.
• Collaborate with team members to deliver high quality and high-performance .net applications, web and mobile applications.

Requirements:

• Possess a Degree/Diploma in Computer Science / Information Technology (IT,Design) or equivalent.
• Proficient experience with programming language in VB,C# ASP.Net and/or Android, IOS.
• Good HTML5, CSS3, JavaScript, jQuery, Bootstrap responsive web and mobile design.
• Technically proficient with database programming language SQL.
• Demonstrated expertise with MS excel based programming using VBA.
• Experience in SharePoint, Power BI, Power Apps and PHP is an added advantage.
• Technically competent with EDI integration, including web services, Rest API.
• Ability to work under pressure and to tight deadlines.
• Ability to communicate complex concepts.
• Good interpersonal, analytical and problem-solving skills.
• Minimum 2 years of relevant working experience is required

As a XS Developer, you’ll be working closely with our development team to implement and optimize code for our project (mainly xs syscalls). We’re looking for someone with a solid understanding of Age of Empires 2 mechanics and XS scripting, who is also comfortable with general scripting tasks to support a variety of development processes. In return, you will be part of a creative and supportive team environment with the ability to have a direct impact on the development of top-tier games.

Are you up for the challenge?

Some of the cool stuff you'll be doing:

· Develop and maintain code in C/C++

· Working with automation tools and customized scripting languages (.xs) in a proprietary engine

· Utilize Age of Empires 2 knowledge, including mechanics and XS scripting, to enhance project outcomes

· Collaborate with the team to deliver optimized and high-quality code

Requirements

· 1+ year of experience in C/C++ with a passion for game dev

· Strong understanding of Age of Empires 2 game mechanics and avid fan

· Fluency in English

· Strong general scripting skills and automation knowledge

· You will be asked to partake in a technical test to prove your skills.

· Plus: Any modding experience with AOE2

Rapsodo is a Sports Technology company with offices in the USA, Singapore, Turkey & Japan. We develop sports analytics products that are data-driven, portable and easy-to-use to empower athletes at all skill levels to analyse and improve their performance. From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

We are innovative, focused, and rapidly growing. We are continuously looking for team players who will stop at nothing to deliver state-of-the-art solutions as part of Team Rapsodo.

As a Full Stack Developer, you will design, develop, and deploy robust, secure, and user-centric applications while leveraging the power of cloud technologies. You will work across the entire tech stack, ensuring our applications are scalable, efficient, and aligned with business goals.

Location:

Singapore

Key Responsibilities:

• Develop Full-Stack Applications: Design, build, and maintain responsive front-end interfaces and secure, scalable back-end services.
• Cloud Integration: Leverage cloud platforms (AWS, Azure, Google Cloud) to develop and deploy cloud-native solutions, ensuring optimal scalability and performance.
• Collaborate Across Teams: Work closely with product managers, designers, and DevOps engineers to deliver seamless user experiences.
• Optimize Performance: Ensure applications perform reliably under high usage, implementing best practices for scalability and security.
• Innovate: Stay ahead of industry trends and bring new ideas to enhance our offerings.

Requirements:

• 8+ years in full-stack development with expertise in front-end frameworks (React, Angular, or Vue.js) and back-end technologies (Node.js, Python, Go, etc.).
• Hands-on experience with cloud platforms such as AWS, Azure, or Google Cloud.
• Strong understanding of CI/CD pipelines and DevOps tools.
• Proficiency in building RESTful APIs and microservices architecture.
• Familiarity with containerization (Docker, Kubernetes) and serverless computing.
• Experience with both SQL and NoSQL databases.
• Excellent problem-solving and analytical abilities.
• Strong communication skills to work effectively with cross-functional teams.
• Self-motivated, team-oriented, and driven to innovate.
• A natural curiosity for new technologies and trends in cloud computing and software development.

We are a global leader in sports vision technology, powered by a team that believes in failing fast, learning faster, and winning as a team. At Rapsodo, you'll thrive in a culture driven by customer focus, achieving more with less, and redefining what's possible. If you are eager to work independently while contributing to a dynamic, innovative, and passionate team, we encourage you to submit your application.

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

Job Responsibilities:

• Responsible for the architecture design and construction of the backend for social products and participating in technical planning.
• Responsible for the design of system software architecture, system modules, key components, and interfaces.
• Participate in writing core code, conduct project code reviews, continuously optimize code, and assist in resolving complex bugs.
• Adjust algorithm configurations in real-time based on business requirements.
• Participate in technical architecture reviews, ensuring high-quality technical designs.
• Guide, coordinate, and resolve technical issues that arise during the development process.

Job Requirements:

• Bachelor’s degree or above, majors in Computer Science, Software Engineering, or related fields.
• Over 6 years of experience in internet research and development, with experience in designing large-scale application systems. Experience in social product development is preferred.
• Proficient in microservices architecture and distributed architecture design, with experience in system development and optimization for high traffic, high availability, high fault tolerance, and high-load environments.
• Solid backend development skills, proficient in Java, with in-depth understanding and practical experience in data handling, performance optimization, concurrency, online system maintenance, and horizontal scaling.
• Familiar with Spring Cloud, Zookeeper, Redis, Kafka, Elasticsearch, and underlying architectures, including principles, cluster deployment, parameter optimization, and secondary development capabilities.
• Familiarity with recommendation technologies, algorithm engineering, and real-time estimation techniques is a plus.
• Strong communication, team collaboration, and project management skills, with the ability to work under pressure.
• A foundation in data analysis and a willingness to learn deeply, coupled with strong business acumen.
• Fluency in both English and Chinese for professional use.

JOB DESCRIPTION

Commissioning and Trouble-shooting to the all kind of air- con system,(A.C.C.U, A.H.U, F.C.U, SPLI type , WINDOW type , PACKAGE type , AND CHILLER type) check the Electrical wiring diagram to the system.

Overhauling all kind of Compressor to the refrigeration system(Carrier (5f/5h series), Daikin(c55/c58/c74/c75 series),Sabroe(cmo 20, 30 /smc 100/bf series), Bock(f-series), York( ms/mrseries), Carlyle (06ea/06ed series), Bitzer.

Mitsubishi (MS/O6B Series) open type and semi-hermetic type).

Split type air condition installation and troubleshooting.

Package type air condition installation and trouble shooting.

Re-fabricate and modify the piping to the Condenser by brazing method.

Re-fabricate and modify the piping to the Evaporator coil & steam coil by brazing.

Retro-fittings to the refrigeration system as per Environmental free zone Freon gas.

Service report maintains, & Attendant customer feed-back.

JOB REQUIRMENT

Minimum Degree or diploma in Relevant Engineering.

Minimum 10 years of experience on the relevant field.

Must have good communication knowledge.

Must have pervious Singapore experience.

Must able to work in any shift or any timing slot.

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Job Description

Reporting to the Project Manager/Engineering Manager, successful applicants will be involved in Power supply system and switching mode power supply development activities such as electrical circuit design, magnetic design, prototyping, evaluation and assisting manufacturing in BETA run of the new product.

Key Skills & Responsibilities

• Understand customer requirement to design or modify XP product to provide Added Value (AV) Solution based on XP design criteria and procedure
• Maintain an in-depth knowledge of all XP products to identify and select the most suitable product for Engineering Solution design.
• Design new products in timely manner to meet the product spec, modify existing designs, improve existing products for better performance and /or cost
• Proposed AV or modified solution based on sales/customer requirements.
• Perform product verification & validation test such as electrical performance, thermal, EMC and DVT to ensure product meet specification before delivered to customer.
• Electrical circuit and schematic design
• Embedded systems design both in hardware
• Firmware design knowledge will be an added advantage.
• Bill of materials (BOM) creation and documentation.
• Breadboard and prototype samples making and debugging
• Design new solution/product within XP standard design practice, safety guidelines, agreed timescales and costs.
• Performed product (AV and modified model) verification and validation, such as electrical performance, thermal, EMC and DVT evaluations,
• There will be some travelling required in conjunction with customer and manufacturing support as well as outside training

Qualifications

Knowledge/Qualifications/Attributes

• Minimum bachelor’s degree in electrical/electronic or higher degree in a related engineering field.
• More than 3 years electrical design experience of power supply/power system; those with more than 5 years’ experience will be considered for senior position.
• For Senior position, Identifies, and review projects main task, schedules, and technical challenges on project delivery timely is required.
• Good project management skill and capable of leading long-term structured problem-solving projects for senior position.
• Familiarity with PCB design using Altium/PADS will be an added advantage.
• Requires good communication, reasoning, problem solving and analytical skills.
• Hardworking, dynamic, strong responsibility and a good team play

Who Are We?

HoYoverse is committed to providing immersive virtual world experiences to players around the world. We have brought fans popular games including Genshin Impact, Honkai: Star Rail, Honkai Impact 3rd, Tears of Themis, and Zenless Zone Zero, as well as a wide range of entertainment content.
‌
Community is at the heart of everything we do. We are devoted to engaging fans and fostering an enthusiastic and inclusive global community that provides access and encouragement for people to share their passion for ACG (Animation, Comics, and Games) through their own creativity and skills.
‌
Pushing the boundaries of imagination, we consistently explore cutting-edge game development technologies, and have accumulated leading technical capabilities in cel shading, cloud gaming, and other fields.
‌
In the future, we will continue to expand our content production, technology research, and publishing duties through operations in offices in Singapore, Montreal, Los Angeles, Tokyo, Seoul, and other areas.

When you apply to a position with HoYoverse, we will process your personal data. To learn more about how we process your data, we encourage you to review our comprehensive Global Applicant and Candidate Privacy Policy. This policy provides detailed insights into how your information is collected, used, and protected throughout the application process.

What You Will Do:

• Collaborate with top-tier game R&D teams to implement comprehensive risk management strategies, ensuring quality assurance from the design phase through to the game launch.
• Experience the gameplay design, leveraging your extensive gaming experience to provide constructive feedback aimed at elevating the user experience.
• Utilize a range of tools and methodologies to conduct thorough and meticulous game testing. Follow up on issue resolutions to ensure a seamless game launch.
• Uphold and maintain stringent standards at all times, continually striving to enhance R&D processes. This effort aims to improve team efficiency and the quality of outputs, thereby contributing to the development of first-rate products.

What We Are Looking For:

• Passion for games and extensive gaming experience, with high standards for game quality. Hardcore gamers are preferred.
• Exceptional logical thinking skills with a strong aptitude for learning; be patient, detail-oriented, accountable, and adept at identifying and resolving issues.
• Strong communication skills, coupled with the ability to drive progress and collaborate effectively within a team; ability to perform well under pressure.

Bonus Points:

• Foundational knowledge in computer science and programming skills.

We are an equal opportunity employer that believes diverse backgrounds are key to bringing our concepts to life. If you're looking to play a key role in creating the best immersive virtual world experience for our users, we invite you to join our team.

As a Process Development Engineer, you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with material suppliers to achieve quality, cost and risk management objectives.

• Excellent execution on assembly process for 1st New Product Introduction (NPI) success and smooth transfer process from NPI to HVM
• Excellent execution of the qualification of NPI products / packages build that proliferate from the pilot products and packages according to planned timeline
• Full responsible on support NPI business process with process TRA, POS, PFMEA/QCP, risk mitigation and documentations.
• Deliver BIC yield and cost on product NPI with integration of DFx BIC package solution, process guideline and design rules.
• Collaboration with cross functional team from NPI to LVM/HVM process transfer.
• On-time execution of NPI Customer samples and Engineering Samples build for new products and packages

SME Process Owner Responsible for Continuous Improvement on Process Yield, Defect Elimination and Process Characterization

• Process owner to perform on-time detection with data analysis for process yield improvement. Lead the defect elimination and continue improvement action, with problem solving methodology, statistical analysis and integration solution decision.
• Process owner to develop process recipe for BIC UPH, conducting process characterization to define process parameters and boundary.
• Continuous develop in depth assembly process technical knowledge, well understand process capability/tolerance//spec limit/CpK, and utilize key tools PFMEA/QCP/APC/FDC/Alarm on assembly processes Cz/Development/NPI.
• Global leader for cross team collaboration on network BKM, process recipe spec and recipe standardization/conversion.

Technology enablement and development – Process, Material, Equipment

• Participate and support Product Roadmap, to enable key process capability and technology development to ensure packaging solution is ready prior 1st Qual Silicon deliver.
• Frequent engagement with equipment and material supplier (at least interval of monthly or daily/weekly for process issues)
• Collaboration with Supplier and involvement Supplier Roadmap (Material/Equipment/OSAT), to understand market trends and competitor’s direction, ensure key process technology and capability enablement is in-line.
• Frequent review and participant Competitor Analysis, to understand market trends and competitor’s technology/capability boundary
• Engage and follow PDE business process (TGR, TORB, KEG interlock) for new technology qualification, alignment and safe launch

Teamwork and General expectation

• Trainer/Buddy/Mentor for new team members, build effective relationships within team and cross team (peers, counterpart)
• Regularly review data and direction with supervisor. Demonstrate sound data analysis and judgment. Present reports and findings with appropriate conclusions, recommendations and decision making.
• Develop, or coordinate development of, training materials for existing/new process
• Safety Identify and promptly report hazards, follow safety procedures and area work rules including proper PPE, lockout and chemical safety.

Requirements:-

• Masters or Bachelor's degree in Mechanical/ Materials Engineering
• Experience in backend engineering process or package development preferred
• Good technical knowledge in component test and/or module manufacturing process
• Excellent data analysis, statistical analysis, data interpretation skills
• Ability to make sound data-driven decisions. Prioritize and apply due-diligence in day to day task.
• Possess analytical and problem solving skills
• Keen interest in semiconductor engineering
• Showcase leadership experience and potential

About DKatalis

DKatalis is a financial technology company with multiple offices in the APAC region. In our quest to build a better financial world, one of our key goals is to create an ecosystem-linked financial services business.

DKatalis is built and backed by experienced and successful entrepreneurs, bankers, and investors in Singapore and Indonesia who have more than 30 years of financial domain experience and are from top-tier schools like Stanford, Cambridge London Business School, JNU with more than 30 years of building financial services/banking experience from Bank BTPN, Danamon, Citibank, McKinsey & Co, Northstar, Farallon Capital, and HSBC.

About the role

You will be part of a cross-functional agile engineering team (squad) responsible to build, deploy and run (support) one or more of our digital products, focusing on full-stack experience to build robust & resilient systems (front-end & back-end).

You will work closely with Engineers, Product, Design, and other stakeholders, collaboratively ensuring quality gets built in the product, get to see your impact in everyday lives of many people, and have great fun while doing it.

You will share your learnings within and beyond your team (squad) and mentor budding engineers for good engineering practices

What will you do

• Working with engineering+product owners to design, refine and develop the product, from concept to implementation.
• Main contributor in creating best in-class product & experience for our customers by designing, building, scaling, and evolving our platforms, services, and tools
• Communicate, collaborate and work effectively across cross functional teams in a multicultural environment
• Mentor a team of highly talented and motivated engineers
• Ensure the performance, security, and responsiveness of applications built
• Continuously improve code quality, product execution, automatization and customer delight

What you need to have

• You have at least 10+ years of professional experience in a similar role developing highly scalable applications
• Good written and spoken English
• Hands on expertise in Java / Javascript or its derivatives (Typescript, NodeJS, Scala, Kotlin, Springboot, etc)
• Have hands on experience on one of this front-end development (Flutter Preferred)
• Experience to Lean/XP practices (TDD, Pair Programming, Continuous Integration/Delivery for both Mobile & Back-end)
• Experience working in Agile Software development
• Communicate, collaborate, and work effectively across distributed teams in a multicultural environment.
• You’re excited about delivering end-to-end experiences and care about your software architecture across the front-end, back-end, and the APIs that glue them together
• A passion for quality and best practices but with a pragmatism that understands the
  balance between perfection and delivering value in a timely manner.
• Enjoys mentoring more junior engineers on good engineering practices & share knowledge

Job Responsibilities:-

• Define, architect and document the Design-for-Testability (DFT) concept for SOC’s
• Develop, implement and verify DFT measures
• Work closely with cross-function teams (design/verification, physical, and operation) to ensure all test requirements are met and DFT function is correctly implemented for effective DFT solutions
• Achieve target structural test coverage for logic, memories, serdeses and other mixed signal IPs
• Test pattern generation/verification/post-silicon ATE support

Job Requirements:-

• Master's or Bachelor Degree in Electronics and Communications Engineering or equivalent
• Minimum 10 years of working experience in DFT field
• Good knowledge in Boundary Scan, ATPG Scan, Synopsys SMS and/or MBIST is a must
• Working experience in industry standard tools like Test Kompress, DFT advisor, DFT Compiler, Mentor’s SSN and OCC controller are desirable
• Knowledge of full VLSI RTL2GDSII design flow
• Knowledge in high level programming and script writing
• Knowledge in HDL, synthesis, static timing analysis and constraining will be an added advantage
• Some Experience in Test development and Product engineering

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Service Desk Engineer

We are looking for experienced full-time Service Desk engineer to provide End User Computing or Service Desk support to APAC Region in Singapore.

Job Responsibilities:

• Provide level 1.5 End User Computing support and well verse in Windows OS.
• Change Management, including review new and implemented changes, chair CAB, review change schedule, maintain dashboard, prepare comms.
• Incident Management, including analysing trends, incident workarounds, monitoring aged incidents.
• Major Incident Management, including communication, being part of the Incident Repsonse Team, managing suppliers
• Problem Management, including chairing any problem meetings, managing active problems, highlighting new problems.
• Release Management – liaising with the testers, vendor, tracking features and defects
• Service Request Management – documenting processes, analysing trends, identifying service improvements, working with teams to design new processes
• Continual Service Improvement – being able to highlight areas of improvement for effectiveness and efficiency
• Service Reporting
• ServiceNow – to assist with the day-to-day management of the tool, including working on incidents and requests

Technical Skills & Qualifications Required:

• Good knowledge of ITIL
• Good knowledge of ServiceNow
• Good knowledge/experience of using the Microsoft suite, specifically including SharePoint , Visio and Excel
• Exposure to/familiarity with automation

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• At least 3-5 years of relevant working experiences.
• A good team player.
• Excellent interpersonal skills.
• Excellent verbal and written communication skills, and ability to communicate with different audiences and write a range of document types – procedures, comms, training modules.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Sound problem solving and investigative skills.
• Desire to follow best practice and development standards as agreed within IT.
• Keen to learn new skills.
• Working location: Central, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

Job Description

• Carry out routine maintenance and repair work (Machine and Facilities)
• Perform plumbing, painting, and minor repairs
• Provide technical support and training to staff
• Implement preventive maintenance schedules
• Ensure compliance with health and safety regulations

Job Requirements

• Electrical/Mechanical engineering knowledge is an advantage
• Machinery repair and maintenance is an advantage
• Able to work as a team and individually
• Must be willing to be hands on
• Able to do overtime and work on Saturday and Sunday if required

Roles & Responsibilities

M&E Engineer is responsible for :-

JOB DESCRIPTION:

· Monitor and report on the progress of work to project manager;

· Control the progress of shop drawings, technical submissions and equipment/material procurement/fabrication/delivery status for on-time completion.

· Coordinate with client’s representatives, consultants, and subcontractors on all technical matters, including submission of method statement, drawings, materials, samples and work progress;

· Control site progress & installation quality as per approved;

· Carry out inspection of M&E works prior to concreting or subsequent construction works;

· Assist in supervising and coordinating work closely with other departments;

· Assist for submission of evaluation of progress claim, variation work to M&E Manager

· Participate in all relevant project meetings;

· Responsible for carrying out M&E technical meetings and resolving technical issues with record;

· Responsible for M&E drawing coordination and production of CSD and individual service drawings quality;

· Responsible for conducting inspection to meet with construction schedule;

· Provide and maintain all site inspection records & T&C records up to date;

· Ensure quality of MEP workmanship and compliance with safety and environmental requirements;

· Provide and maintain all site inspection records & T&C records up to date;

· Allocate work and ensure jobs are correctly and properly achieved within standards and SOP.

REQUIREMENTS:

· Diploma / Degree in Mechanical or Electrical Engineering;

· Min of 2 years’ work experience related projects in Singapore building and construction industry;

· Strong Electrical/Mechanical knowledge with hands-on experiences;

· Sound knowledge in BIM, Revit, Autocad would be an advantage;

· Good communication skills with the ability to coordinate with site teams to execute work

As an Engineer of MSB Lean Manufacturing, you will manage the implementation of Lean transformation methodologies and tools in Assembly, Test and SSD manufacturing at MSB. You will collaborate closely with site functional teams to identify, explore and implement lean methodologies and tools to drive improvements in throughput, labor productivity, yield, and cycle time performance.

Responsibilities:

• Lead the adoption and implementation of Lean methodologies and tools across Assembly, Test, and SSD manufacturing.
• Facilitate continuous improvement events across different functional teams (e.g., Kaizen, Value Stream Mapping (VSM), Projects, Workshops).
• Develop and sustain programs and systems to foster a Lean culture.
• Conduct labor productivity analyses (e.g., Touch-time, MMR, spaghetti charts) to enhance operator and technician efficiency and reduce operational errors.
• Oversee Utilization/ Overall Equipment Effectiveness (OEE) to identify key sources of losses and improvement opportunities.
• Collaborate with functional experts to identify areas for improvement through the application of Lean methodologies and tools.
• Propose Lean approaches and initiatives, including Kaizen and Continuous Improvement Projects.
• Act as the key integrator between central and site functional teams, developing, driving, and communicating progress on critical Lean improvement initiatives.
• Develop an overall view of critical initiatives and their impact on key performance indicators.
• Provide visibility on program status, including key achievements with clear ownership.
• Trigger interventions to ensure programs stay on track towards targets.
• Support regular reporting and meetings with senior leadership, including deep dives for weekly/monthly reports and ad-hoc senior management updates.

Requirements

• Bachelor’s /master’s in Industrial and system engineering, engineering management, Production & Operation Management, or related field.
• > 2 years of experience in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals in the semiconductor industry
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations

Keen on the role? Apply now!

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Working Location: Buona Vista

Working Time: 5 day work week, 8:45am - 5:30pm

Job Description

● Utilise 3D CAD design tools and perform high precision 3D printing (FDM

& DLP)

● Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32

to build simple circuit boards for sensor control and data acquisition

● Testing and assembly of electronics and mechanical parts and debugging

of software using basic tools like python or C++

● Familiar with maintenance of laboratory inventory and laboratory

administrative tasks (Procurement, equipment preventive

maintenance/repairs and safety matters)

● Enthusiastic, highly motivated, able to multitask, with excellent

interpersonal and communication skills.

● Administrative works, such as ordering and payment with SAP system.

Job Requirements

● Basic experience in 3D CAD design software, like Solidworks and Fusion360.

● Basic experience with microcontroller boards like Arduino, Esp32, STM32.

● Basic experience in handling simple electronics and basic hands-on soldering skills

● Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

● Diploma/Higher Nitec/ Nitec holders in Bioengineering, Biophysics, physics, mechatronics, electrical engineering, mechanical engineering, computer engineering, or any related fields.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

EA Personnel.: Chan Jun Wei
EA Registered no.: R1543992
Recruit Now Singapore Pte Ltd
EA License no.: 21C0845

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering(PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 5-7 years of semiconductor fab experience in Chip package interaction and integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team-oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!

As a Non-Volatile Memory Quality & Reliability Assurance (NVMQRA) Engineer at Micron Technology, you will be responsible for performing formal Failure Analysis of customer reported failing devices via the Returned Material Authorization (RMA) process. You will be required to summarize lab analysis results at the electrical and physical level to identify root cause and establish an associated containment plan. In this role, you will have the opportunities to collaborate with various engineering and manufacturing stakeholders to evaluate and review Corrective Actions /Preventive Actions. You will provide documentation of the RMA findings and oversee the final customer report till closure. In addition, for the senior role, you will be asked to provide guidance and lead the team when solving complex unplanned deviations reported by our customers. Project management skills are necessary and the ability to make critical decisions that directly translate to quality and timely completion of the project is highly desirable. You will also be required to spearhead the sustaining efforts and keeping up to date on new product knowledge, as well as developing and mentoring new talents.

Responsibilities and Tasks

Perform Failure Analysis of Customer Returns

• Understand customer complaint of the memory component failure
• Initiate communication with Micron Customer-facing team for further details on customer complaint, requesting additional questions to provide best opportunity for successful analysis
• Perform bench level analysis including initial data image analyis/examination
• Perform Automated Test Equipment (ATE) analysis and interpret results
• Work with the appropriate engineering teams (e.g., PE, PYE) to perform detailed fault isolation when electrical failure has been confirmed
• Summarize findings and submit for physical failure analysis (PFA).

Provide FA Reports for Micron Customer Facing Team for Communication to External Customers

• Summarize analysis at electrical and physical level into customer friendly formats.
• Work with the appropriate manufacturing Global Quality teams through the appropriate request systems (example: GPSS) for Root Cause and/or Corrective Action and a containment plan
• Identify potential risk to external customers
• Communicate with respective BU (Business Unit) on potential impact to customers
• Communicate FA updates through interim reports or during scheduled meetings with the customers.
• Provide formal FA Report with findings

Sustain Knowledge of Device Capabilities and Characteristics

• Keep up to date with latest Fab/ASM process technology
• Understand datasheet specifications for each device and the differences from previous technode for NOR * NAND product family
• Comprehension of qualification data and potential impact to customer operation
• Stay up-to-date on common customer applications and usage model
• Partnering with customer support team to resolve ongoing customer issues

Qualifications and Experience

• Excellent verbal and written communication skills in English. The ability to communicate clearly and concisely both verbally and in writing is critical in this role.
• Good organization skills and ability to multitask and coordinate between multiple issue at any given time.
• Ability to work effectively in cross-functional teams and handle pressure situations in a professional manner
• Excellent problem-solving and analytical skills with strong attention to details.
• Familiarity with NexTest /Teradyne bench analytical tools, scripting in linux console will be an added advantage.

Candidates with 2-3 years of experience in the semiconductor industry as Product or QA engineer are preferred. Relevant experienced candidates will be considered for the Senior Role.

Education

A Bachelor or Masters Degree in Electrical Engineering or similar field of study.

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Candidate with vast experience is also encouraged to apply.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.