• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Report to the Head of Department at basis level and to the Lead Electrical Engineer at project level.
• Implement Company work processes, procedures and quality policies as required by project.
• Review Company contractual requirements, scope boundaries and support the Lead Engineer with the Management of change on assigned areas.
• Manage interfaces with equipment and package suppliers to comply with technical requirements, specifications and Client’s Basis of Design, Standards & Project Specifications.
• Ensure that that all risks related to his/her area or responsibility are identified, assessed and preventive measures are implemented in a timely manner when required.
• Support the Lead Engineer on verification activities as required by the verification body / classification society or other applicable approving authorities.
• Represent the Electrical Engineering discipline during meetings, audits, verifications, workshops and technical reviews and be responsible for an effective and timely resolution of identified issues.
• Provide technical support related to Electrical activities at the fabrication site, whenever required.
• Ensure the technical integrity of all Electrical Engineering activities and deliverables for work performed through project lifecycle phases and for compliance to project specific performance, integrity, quality and HSE requirements.
• Continuously seek to improve working methods, tools and procedures and contribute actively to the Electrical Engineering Discipline development and experience transfer.
• Perform any other duties as assigned by supervisor.

Work experience requirements:

• Must have a minimum 8 years of work experience in medium/large sized brownfield and/or greenfield projects in the Upstream Oil and Gas sector and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Experience in electrical power system design and handling of power system studies.

Qualifications:

• Bachelor’s degree in Electrical Engineering.

Other skills:

• A good understanding and knowledge of oil and natural gas industry standards including but not limited to IEC, NORSOK, DNV and other relevant standards related to Electrical Design and Engineering.
• Effective technical communication (verbal and written) skills with proven ability to present technical issues to design teams, client, technical authorities and verification bodies.
• Effective interpersonal skills and ability to work well with people at all levels.
• A self-starter who can work independently, make sound decisions, analyses problems and provide focused solutions.
• Prepared electrical philosophies and specifications for electrical systems for concept, FEED and detail engineering projects as necessary.
• Dimensioning and calculation of electrical networks (High and Low voltage).
• Prepare Technical Requisitions for electrical packages like High and Low voltage switchgear, Transformers, Bulk materials etc.
• Input and Follow up of vendor documentation.
• Participate during Factory Acceptance Test (FAT)/Site Acceptance Test (SAT).
• Perform electrical calculations like cable sizing, lighting and heat tracing using relevant software’s.
• Client liaison regarding technical clarifications and queries.
• Co-ordinate electrical design within own discipline and on a multidiscipline level.
• Administration of tags in EIS (set up, define control objects, link to activity, data input etc.).
• Cable administration in relevant database like cabsys, AVEVA.
• Familiarity with Equinor systems (STID, STID TAG, procosys, Stidele, cable routing, SAP) will be a distinct advantage.
• Produce new and revise existing documentation and drawings in accordance with project document schedule.
• Assist in preparation of bulk material MTO.

We regret that only shortlisted candidates will be notified.

ROLE DESCRIPTION SUMMARY

A Systems Engineer (Solutions)interfaces with customers and identifies their needs. A Systems Engineer (Solutions)with then work with various departments from network engineers, support and operations to ensure a plan is in motion to improve the customer's experience. A Systems Engineer (Solutions)works to balance various aspects of the project, from safety to design. Additionally, a Systems Engineer (Solutions)researches advanced technology regarding best practices in the field and seek to find cost-effective solutions.

Performs a subset of the system engineering activities required to develop a solution or product.

Analyses the customer’s and other stakeholders’ needs whatever the used means (e.g. advanced studies, simulations, mock-ups, models, prototypes, …)

- Describes the missions, functions and requirements on the sub-system

- Formalises the specification and the architectural design to develop the sub-system

- Prepares and performs the solution or product integration, verification and validation tests.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Engineer, you are accountable to:

• Perform the engineering requirements analysis
• Provides required technical documentation:
• Design Documents (Preliminary, Final)
• Statement of Works for suppliers and external contractors
• Input/output requirement for Interfaces Management
• Input for specialty engineering: RAMS, EMC/EMI, Cyber-Security.
• Input for Installation Management
• Operation and Maintenance documentation
• Training material
• Assists the bid team to scope and cost engineering work packages
• Work with contractors to produce costing, ensure that they deliver on time
• Reports and follow-up the KPIs for the sub-system
• Participate to progress meetings
• Analyse and Correct the Problem Changes Requests

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

QUALIFICATIONS

• Tertiary qualification in Computer Science, Information Technology, Electronics Engineering or related discipline (essential)
• Higher degree qualifications are desirable.
• Demonstrated engineering competencies required for qualification to INCOSE CSEP (or equivalent, or ASEP) are highly desirable.

ESSENTIAL EXPERIENCE

• Minimum of 5 years’ experience in an Engineering role
• Able to decipher technical scope from high level requirements
• Experience with Governmental and/or complex IT Projects
• Strong oral and written communications skills.

DESIRABLE EXPERIENCE

• Experience working on Software Security projects
• Experience working within a Systems Engineering lifecycle
• Knowledge of Thales Products and Processes
• Membership of relevant professional organisation, e.g. INCOSE, Institution of Engineers Singapore, etc.

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

1. Conduct lab-based research and perform experiments.
2. Collaborate with colleagues both inside/outside the group.
3. Assist in daily lab management duties.
4. Present and report research results and publish scientific results in peer-reviewed journals in a timely manner.
5. Ensure compliance with environment, safety, health and quality program requirements from all levels (e.g. university, faculty of engineering and the department of MSE).
6. Translation and commercialization. Training will be provided

Job Requirements

A bachelor and a master degree in Chemical Engineering, Material Engineering or related field is required. The candidate should have 2-3 years of experiences in doing research.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry-partnered Ignition research project where you will be part of a collaborative team exploring innovative ways of characterizing the physical and rheological properties of liquid personal care products and understanding the impact of these properties in product design and process development.

Key Responsibilities

• In this role, you will perform shear and extensional rheological characterization of a large variety of liquid personal care products including lotions, topical oils, and more. We will explore innovative and emerging methods of rheological characterization and analyzing rheological data to extract material parameters to build a database of materials. Working with our industrial partner we will establish an understanding of rheological properties that are useful for product formulation and process design related to lab and larger scale extrusion/dispensing applications.More specific responsibilities include:
  • Participate in and manage the research project with Principal Investigator (PI), and the research team members to ensure all project deliverables are met.
  • Undertake development of rheological protocols and characterization of liquid personal care products
  • Formulate model materials with various additives to understand their impact on product rheology
  • Design, execute, and interpret experiments independently and with support from the PI.
  • Prepare and deliver written articles, reports, and presentations for industrial partners and external audiences.
  • Attend and present at regular group meetings to receive feedback on work done and future plans
  • Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
  • Coordinate procurement and liaison with vendors/suppliers.
  • Work independently, as well as within a team.

Job Requirements

• Have relevant competence in the areas of rheological characterization and analysis, wet lab work, material formulation
• Have a degree in pharmaceutical engineering, chemical engineering, mechanical engineering, food or materials science/engineering, or a related field. Possessing a Master’s degree will be advantageous.
• Knowledge of any of the following will be advantageous: material dispensing/extrusion processing, material science, textural and sensory analysis

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development.
• Proficient in communicating via technical writing and presentations.
• Possess strong analytical and critical thinking skills.
• Show strong initiative and take ownership of work.

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Product area

Whether it is paying online with Autofill, using tap and pay in stores, or using the Google Pay app, the Payments team at Google is focused on making payments simple, seamless, and secure. In addition to consumer payment technologies, the Payments team also powers the money movement between Google and its consumers and businesses.

Job description

Google's software engineers develop the next-generation technologies that change how billions of users connect, explore, and interact with information and one another. Our products need to handle information at massive scale, and extend well beyond web search. We're looking for engineers who bring fresh ideas from all areas, including information retrieval, distributed computing, large-scale system design, networking and data storage, security, artificial intelligence, natural language processing, UI design and mobile; the list goes on and is growing every day. As a software engineer, you will work on a specific project critical to Google’s needs with opportunities to switch teams and projects as you and our fast-paced business grow and evolve. We need our engineers to be versatile, display leadership qualities and be enthusiastic to take on new problems across the full-stack as we continue to push technology forward.

Qualifications

Job responsibilities

• Build out data infrastructure and data pipelines in a secure and privacy compliant manner.
• Work with feature teams to provide reliable data and infrastructure.
• Maintain existing data infrastructure and ensure critical data is available and reliable.

Minimum qualifications

• Bachelor's degree or equivalent practical experience.
• 1 year of experience with software development in one or more programming languages (e.g., Java, C++).

Preferred qualifications

• Experience working with large data and creating and making available data cubes for other teams.
• Experience in optimizing data processing pipelines and data serving.
• Experience with data analysis and visualization tools (e.g., SQL, Colab).

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Coastal Protection and Flood Resilience Institute (CFI) Singapore is actively seeking a Research Engineer to contribute to a groundbreaking research project. This research explores the efficacy of integrated nature-based solutions in sediment erosional control and coastal protection. The goal is to develop innovative, physically based models that quantify the protective benefits a vegetation meadow can offer to shorelines.

The Research Engineer will participate in experimental research, with a specific focus on studying sediment flux in hybrid solutions to coastal protection. He/she will lead and execute flume experiments, data analysis and field sampling as well as specific tasks which includes planning and conducting experiments, running laboratory analyses, collection and analysis of data, and performing basic administrative duties.

He/she will work need to work with Assistant Professor Gary Lei from Civil and Environmental Engineering and Dr. Ow Yan Xiang from the Tropical Marine Science Institute (TMSI) at NUS. Ideally, we are interested in candidates with prior experience with laboratory experiments.

Job Requirements

• Possess a bachelor’s degree in environmental engineering /Environmental Science/ Mechanical Engineering, or a closely-related field.
• Priority will be given to applicants who have prior research experience in coastal engineering, aquatic plants science, eco-hydraulics, and/or environmental fluid mechanics.
• Strong verbal and written communication skills.
• Proficient with Microsoft Suite and R, or other equivalent analytic software.
• Open to fixed-term contract.

As a PDE Central Process Integration Principal Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide synergy

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

JOB QUALIFICATIONS

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

As a PDE Central Process Integration (PI) Senior Engineer, you will lead the development and integration of assembly and packaging processes for cutting-edge semiconductor products, such as DRAM, NAND, controllers, graphics, 3D-stacked (3DS) technologies, and High Bandwidth Memory (HBM). The ideal candidate will drive innovation in packaging technology and ensure seamless process integration during new product introductions.

This position involves working closely with multi-functional teams to research, design, and implement new packaging solutions while optimizing production yields and ensuring the successful commercialization of next-generation semiconductor technologies.

JOB RESPONSIBILITIES

Promote worldwide alignment

• Improve benchmark performance and efficiency gains through global project management and execution
• Network BKM leveraging and enhancement, business process creation and re-engineering
• Maintain a strong and open relationship with peer group and managers in other functional areas within central team and outside in areas such as Sites, TD, Product Engineering, Global Quality
• Help drive and fix the issue where necessary

Drive FE-AT Integration initiatives

• Business process governance between Fab – Assembly (WSPEC, FE2BE forum, WPSWAT)
• Lead & drive FE-AT excursions
• Yield, DPM related issues that involves both Fab – Assembly

Cross sites benchmark & achieve BIC yield performance

• Lead PI programs, PI Loop taskforce and/or team in network to address yield and quality challenges, optimize process flow

Identify, Propose & Drive new initiatives programs

• Propose & lead strategic programs to shift left/ shorten cycle learning across TN phase (PD, NPI, HVM)
• Process flow simplifications & standardizations
• Cross technology streamline (Process, tools, etc)
• Sites expansions process & qualification requirements
• Drive roadmaps with multi-functional teams (FE, AT Procurement, APTD, APPDE)

Requirements

• Bachelor's degree in Engineering (Electrical, Mechanical, Materials Science, or related field).
• 3+ years of experience in semiconductor packaging technology development, process integration, or new product introduction (NPI)
• Strong background in frontend fabrication processes (FAB)
• Proven experience in data analysis, statistical process control (SPC), and process optimization.
• Strong problem-solving skills, attention to detail, and a proactive approach to technology development.
• Excellent communication and teamwork skills, with the ability to work across departments and with external partners.
• Hands-on experience in the development and implementation of cutting-edge semiconductor packaging technologies.
• Experience leading multi-functional teams in process development, technology transfer, and ramp-up.
• In-depth knowledge of the latest industry standards and trends in semiconductor packaging and assembly.

Keen on the role? Apply now!

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

What you will do

• Develop and review test plans.
• Develop verification environment/testbench in Module/IP/SOC level.
• Develop verification IP and reference model.
• Implement test with randomization based coverage driven verification methodology.
• Implement functional and functional/code coverage closure.
• Hands-on code/debug with UVM, SystemVerilog, Verilog and SystemC.
• Low Power verification.
• Verification automation flow.
  

What you will bring

• Bachelor's/Master's Degree in EEE/Computer/IC design/equivalent.
• With min. 2 years of relevant experience in similar field.
• With IC/ASIC design verification experience on SOC, Ethernet, PCIe, DDR, USB, ARM CPU.
• Strong experience and debugging ability on SystemVerilog/UVM.
• Skilled in Synopsys/Cadence/Mentor Simulator and debugging flow.
• Experience on Low Power and formal verification is a plus.
• Strong in UNIX scripting with Pyhon, Perl, makefile Cshell.
• Fast learner and a good team player.
• Candidates with more years of experience will be considered for a more senior role.

About the team

Our ASIC DV Team focus on developing full and advanced verification methodology IP/SOC. You will have chance to work on challenging projects that attractive and be immersed in leading tech e.g.: WiFi, 5G, AR/VR, AI, Cloud Networking. A comprehensive program for professional development / career growth will be provided to the new joiner and he/she will have chance to learn from the best expert in this area.In MediaTek, we promote diversity and inclusiveness. Passionate talents who love new challenges and keen on learning new technologies, do send us your cv our way today and join our multicultural team that consists of talents from all over the world!

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to thermal management of flexible electronics. You will play a key role in designing and fabricating flexible electronic devices, with a specific focus on solving challenges related to overheating and heat dissipation.

Responsibilities:

• Design and fabricate integrated thermal management system for flexible electronics devices, including RF devices.
• Conduct thermal simulations to identify potential thermal issues and optimize the heat dissipation capabilities of the devices.
• Develop and implement innovative thermal management materials, structures, and approaches to address overheating challenges in flexible electronics.
• Explore and evaluate new materials for efficient heat transfer, storage, and dissipation in flexible electronic devices.
• Collaborate with interdisciplinary team members to integrate thermal management solutions into the overall device design and fabrication process.
• Perform experimental characterization of thermal properties and performance of flexible electronic devices using appropriate measurement techniques and equipment, including IR thermal imaging and thermal reflectance system.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

To apply, please submit your application materials, including a cover letter and curriculum vitae.

Review of applications will begin immediately and continue until the position is filled.

Qualifications

Candidate should meet at least 4 criteria from the following list:

• Bachelor’s or Master’s Degree in Electrical Engineering, Chemistry, Materials Science, or a related field with a focus on flexible electronics and thermal management.
• Strong background in thermal management of electronic devices.
• Proficiency in thermal simulation software for analyzing and optimizing thermal performance.
• Knowledge of thermal management techniques and strategies for flexible electronics, including heat dissipation mechanisms and materials.
• Experience in developing and characterizing novel materials for heat transfer, storage, and dissipation in electronic devices.
• Familiarity with experimental techniques for thermal characterization, such as thermal imaging and thermal reflectance.
• Strong problem-solving skills and ability to think critically about thermal management challenges in flexible electronics.
• Excellent written and verbal communication skills, with the ability to present research findings effectively.
• Track record of research publications in reputable scientific journals.

As an NPI Engineer, you will be responsible for overseeing the transition of new products from design to full-scale production. You will work closely with cross-functional teams, including Product Development, Manufacturing, Quality, and Supply Chain, to ensure the smooth introduction of new products while maintaining efficiency, quality, and cost-effectiveness. Your role will be instrumental in implementing new processes, optimizing manufacturing methods, and ensuring product manufacturability.

Key Responsibilities:

• Product Introduction & Process Development: Collaborate with the design and engineering teams to evaluate product designs for manufacturability, scalability, and cost efficiency.
• Cross-Functional Collaboration: Partner with Product Development, Quality Assurance, and Supply Chain to define project requirements and timelines, supporting a seamless transition to manufacturing.
• Production Line Setup: Develop and implement production line processes, workflows, and assembly instructions to achieve quality and production targets.
• Process Validation & Optimization: Conduct process validation tests, analyze data, and implement adjustments to optimize production yields and reduce waste.
• Supplier Management: Work with suppliers to ensure components and materials meet required specifications and quality standards.
• Continuous Improvement: Drive continuous improvement initiatives for production processes, focusing on quality, efficiency, and cost savings.
• Documentation: Develop and maintain technical documentation, including process flow diagrams, PFMEA, work instructions, and BOMs.
• Troubleshooting: Investigate and resolve production issues, providing timely solutions to minimize downtime and production delays.

Qualifications:

• Education: Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or related field.
• Experience: 3+ years of experience in NPI, process engineering, or manufacturing engineering, ideally within precision engineering.
• Technical Skills: Strong understanding of production process development, validation, and troubleshooting. Experience with lean manufacturing principles and Six Sigma is a plus.
• Communication Skills: Ability to work cross-functionally and communicate complex technical information effectively.
• Analytical Skills: Proven ability to analyze data, identify trends, and make recommendations for process improvements.

Job description

• Design, develop, test, deploy, maintain and improve of software application

• Documentation of software design and description required in a software process life cycle

• Create and maintain documentation for software installations, changes and upgrades

• Involve in the setup and deployment of software for developmental, testing and operational use

• Manage individual project priorities, deadlines and deliverables

• Evaluate system architecture and make recommendations as required

• Perform peer-to-peer code reviews

Requirement

• Proficient in C, C#, NodeJS, Augular or ReactJS

• Familiar with working in Windows environment

• Good knowledge in Javascript / RESTful API / HTML5 / CSS3 / Typescript will be added advantage

• Good knowledge in SQL / NoSQL databases would be added advantage

• Good knowledge in Network Communication and configuration would be added advantage

• Team player with good interpersonal, written and verbal communication skills

Job Description:

• Perform electrical and mechanical assembly work for the semiconductor industry.
• Perform equipment assembly according to engineering drawings.
• Perform installation, repair, inspection, reassembly, refitting, and adjusting products as required.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Maintain work area clean, safe, and orderly.
• Perform repair pipe and plumbing if needed.
• Planning / Scheduling and coordination of M&E works.
• Oversee and ensure works are carried out by the approved drawings, materials, and method statements.
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Update maintenance daily schedule.
• Any other duties as may be assigned.

Job Requirements:

• Minimum 3 years of relevant experience in the Construction industry.
• Diploma/ Degree in Mechanical & Electrical Engineering or related fields.
• Strong building and M&E knowledge with hands-on experiences.
• Positive attitude, willingness to learn, and good team player.
• Entry-level candidates are welcome to apply.

Others:

• Working hours: Monday to Friday - 8:30 am to 5:30 pm
• Saturday - 8:30 am to 12:00 pm
• Salary range: $2500 - $5000 (Price Negotiation)
  

Job requirement:

• Degree in Mechanical or Electrical Engineering.
• Must have at least 3 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

• Software Development, Implementation and Deployment in the area of industrial automation systems, with Human Machine Interface (HMI), including but not limited to the following sub-systems: Motion Control System, Vision System, Digital and Analog Input/output Control, Device control and Database.
• Work with customer and application team to configure, install and test new equipment.
• Provide software user training to customers
• Field service support, field deployment and on-site / remote debugging
• Overseas travel is required with short notice period.

Qualifications

• Candidate must possess at least Bachelor's Degree and/or equivalent, preferrably in Electrical / Computer Engineering and/or any other relevant course of study.
• Preferably with [1 - 3] Year(s) of working experience in Engineering in automation and/or any other related field/industry is required for this position.
• Fresh graduates with relevant knowledge in their course of study are welcome to apply.

Other Information

Skillset(s) Requirement:

• Required Knowledge: Sofware development
• Required Skill(s): C#, C++, VB.NET, WPF, Winform, MFC, MySQL Database
• Preferably Entry / Junior specialized in [Engineering] - [expertise, Electrical / Mechatronics / Computer Engineering] or equivalent.

Attributes:

• Can do attitude
• Adaptable to a fast-paced environment
• Able to work independently
• Good team player
• Highly logical

• Provide engineering support to various telecommunication equipment installations, testing, patching, and migration.
• Responsible for implementing Outside Plant Cable Networks, such as RF cable, structured cable, Fiber optic cable installation, and testing.
• Responsible for fixing and troubleshooting ADSL Modem, CISCO Routers, and wireless APsPerf
• Perform fault diagnosis, analysis & rectification of LAN, WAN, and Telephone issues
• Perform site acquisition, site survey, acceptance test plan(ATP), and network planning of new sites to roll out and reconfiguration of sites
• Provide engineering support activities either remotely, or on-site.
• Rotational 24x7 standby duties required

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role