Hardware Engineer

Responsibilities:

• Develop of real time embedded systems
• Able to execute development project independently throughout the development implementation and manufacturing process
• Perform debugging, testing and improvement of current products
• Provide in-house/on-site technical support, documentation and technical training

Requirement:

• Degree in Embedded system/Electronics/Electric or equivalent
• Experience in Electronic hardware design inclding circuit analysis, IO interface to microprocessor and component selection for the performance enhancement on current and new product
• Experience in PCB schematics and artwork layout is highly preferred
• Experience in C and Assembly language programming

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Main Responsibilities / Critical tasks

• Responsible to assist in the design of controls system and programming coding to meet the budget and time expectations as defined by Project Manager
• Able to Modify controls design and other documents according to the Mikron Processes & Standards and compliance to industry standards as according to customer URS.
• Develop specific program per customer and project requirements based on Mikron Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly

Skills and knowledge requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent; or at least 5 years related experience and/or training; or equivalent combination of education and experience.
• Minimum 3 years of related work experience.
• Must be able to travel as requested
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Knowledge in Allen Bradley and Siemens-S7 programming.
• Computer skills including intermediate to advanced Microsoft Office Tools (Outlook, Word, PowerPoint) and Excel spreadsheet experience; Microsoft Project; Design software; Internet software; Manufacturing software and SQL/Dbase Database software.

Key Responsibilities:

• Formulation Support: Collaborate with the R&D team to develop and scale up cosmetic and skincare formulations, ensuring consistency and performance.
• Process Optimization: Design, implement, and optimize chemical processes to improve production efficiency, reduce costs, and enhance product quality.
• Quality Control: Monitor production processes to ensure that products are produced according to specifications, comply with regulatory standards, and maintain high-quality standards.
• Troubleshooting: Diagnose and resolve process-related issues, ensuring minimal downtime and maintaining production schedules.
• Sustainability Initiatives: Identify and implement sustainable practices in the manufacturing process, including waste reduction, energy efficiency, and greener chemical alternatives.
• Compliance: Ensure compliance with safety standards, environmental regulations, and industry best practices (e.g., GMP, ISO).
• Cross-Department Collaboration: Work closely with the quality assurance, production, and supply chain teams to ensure smooth operations and continuous improvement.

Requirements:

• Experience: At least 1-2 years of experience in a chemical engineering role, preferably within the cosmetics, skincare, or personal care industry.
• Skills:Strong understanding of chemical processes and formulation techniques in the cosmetic/skincare industry.
  Proficiency in process modeling, data analysis, and process optimization.
  Familiarity with industry regulations and quality standards (GMP, FDA, etc.).
  Excellent problem-solving and troubleshooting skills.
  Ability to work in a fast-paced, collaborative environment.
  Strong communication and documentation skills.
  
• Desirable: Experience with sustainability practices in manufacturing, knowledge of new trends and innovations in cosmetics/skincare formulations.

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

Summary:

• Salary up to $6000
• MNC company - stable revenue & perks
• Transport allowances
• Possess own vehicle
• Location: Pioneer
• 5 days work week
• Sales experience in precision engineering related products

Key Responsibilities:

• Develop new business opportunities & sales leads for revenue growth and customer retention
• Achieve sales targets and analyst current market trends and industry information
• Pitch, recommend and fulfil the requirement of customer in terms of products and services offered
• Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met
• Attend problem and generate solution
• Other related ad hoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering or equivalent
• Sales experience in precision engineering related products
• Strong technical knowledge in CNC machines
• Possess own vehicle is a must

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Senior Testing Engineer

As part of IME’s Photonics & Sensors Department, the candidate will take lead for the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices
• Manage photonics laboratory including facilities management, health and safety, equipment calibration, inventory and stocktake
• Take on procurement duties for laboratory equipment and consumables
• Prepare technical presentations for internal meetings

Qualifications:

• Bachelor’s degree in Physics, Electronic/Electrical Engineering or equivalent
• Experience in optical/photonics device testing
• Experience in experimental data acquisition and analysis
• Critical thinking and problem solving ability
• Strong skills in communication and providing technical presentations
• Values teamwork and fostering a collaborative spirit
• Skillset in programming or instrument automation is a plus

Responsibilities

• Manage IT infrastructure (including SDWAN and cybersecurity solutions), servers (including VM) and backup solutions (on-premises and cloud)
• Manage various IT assets including user PC, Retail POS and peripherals, printers (including barcode printers), electronic shelf labels, digital signage, mobile phones and tablets etc.
• Manage various SAAS solutions including Microsoft 365
• Problem solving, troubleshooting & user support
• Project management of IT initiatives
• Liaising with various external vendor solution providers
• User training, UAT, user/system documentation and change management.
• Assist in developing and implementing IT policies, protocols, procedures, solutions, and best practices including incident reporting on containment and remediation.
• Be part of project management team on IT initiatives (including system updates and migrations) starting from managing timelines, requirements gathering, specifications, sourcing of solutions, evaluation of solutions, managing implementation process including UAT, user training and system documentation.
• Assist to conduct regular system audits, regular checks on network and data security and testing to detect issues within the IT systems.
• Identify opportunities to improve and update software and systems for higher productivity.

Prerequisites

• Minimum 3 years work experience in IT support, systems administration, or network management, experience in setting up or maintaining basic infrastructure (networking, server setups) is a plus.
• Diploma in Computer Science, Information Technology, Network Engineering, or related field.
• Familiar with configuring and maintaining servers, workstations, and network devices.
• Good analytical, logical and problem-solving skills.
• Team player and able to independently and self-motivated.
• Able to communicate clearly with both technical teams and non-technical staff.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Job Summary:

We are seeking a highly skilled and experienced Senior Sales Engineer to lead our front sales activities in the Polymer and Crystallization (POFC) sectors. The ideal candidate will have a strong technical background, excellent communication skills, and a proven track record in sales.

Main Tasks and Key Responsibilities:

• Undertake sales and marketing of Sulzer Polymer and Crystallization Technology in Japan.
• Focal point for Sulzer Crystallization Technology in Southeast Asia.
• Develop and execute sales strategies to achieve sales targets and expand our customer base in the Polymer and Crystallization markets.
• Identify and engage with potential clients, understanding their needs and providing tailored solutions.
• Conduct technical presentations to showcase the benefits and features of Sulzer Polymer and Crystallization Technology.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer prior to order stage.
• Co-ordinate all proposal activities with Process, and Product-line Management teams to ensure customer requirements are met.
• Deliver sales proposals, negotiate contracts, and close deals.
• Follow up projects monthly and update CRM daily.
• Assist Project Management and Engineering during project execution.
• Stay updated on industry trends, market conditions, and competitor activities.
• Involved in organization of marketing activities such as tradeshow, conference and digital content.
• Any other duties that are assigned by superior.
• 40% travelling is expected.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

IT SECURITY engineer

We are a leading Regional IT and Cyber Security system integrator headquartered in Singapore with a presence in Malaysia & the Philippines. We are hiring talented individuals with a positive attitude to join us. We run SOC, a cybersecurity consultancy, and other professional services to local and regional customers.

Primary Functions:

· Responsible for providing technical assistance and support related to computer systems, hardware, or software

· Responds to queries, run diagnostic programs, isolate the problem, and determines and implements a solution

· To ensure that clients get prompt and quality service

· To document troubleshooting and problem-resolution steps

· To participate and provide knowledge transfer to customers when necessary

· Professional services implementation including but not limited to Linux, Wintel Server, Networking, CyberSecurity project implementation

· Create training manuals, documentation, and knowledge transfer documents

· Install and modify computer & Infrastructure based on in-house best practices

· To implement security control on the system and network devices

· Follow up with customers to ensure the issue has been resolved

· Provide technical assistance and support for queries and issues related to computer systems, Local area network (LAN), Wide area network (WAN), and other hardware/software via phone, email, and/or onsite according to stipulated SLA

Requirements and Skills:

· Diploma holder in IT and other IT Security certifications will be a plus

· Minimum 1-year experience in IT

· Fresh graduates are welcome as we will provide relevant training

· A good understanding of IT network, data storage, network, Wintel Server

· Resourceful, creative, independent, and able to work well in a team

· Required to work on-site when necessary

· Taking ownership of technical issues and working with customers and partners to resolve more advanced issues when necessary.

· Good written and verbal skills; excellent phone and email manners.

· Understanding of TCP/IP, OSI Layer, network security, Internet, DNS, network routing, switching, SMTP email, Linux, and Microsoft Windows

Other Information:

· Office Location: 67 Ayer Rajah Crescent #02-10 S139950

· Working hours: Mon-Friday, 9 am-6 pm

· Depending on the season and customer request may require to work outside working hours

· Monthly basic salary commensurate with qualifications and experiences

· Other benefits such as annual leave, medical, insurance, training opportunities, regional exposures, etc

· Additional performance bonus based on individual contribution towards company strategy and its financial performance

Contact: [email protected]

What you will do:
As Digital Solution Engineer/ Architect, you will be taking lead on application of digital software to our customer requirements and supporting digital sales specialists to sell the deals with include:

Client Engagement:

• Engage with prospective and existing clients to understand their business objectives, challenges, and technical requirements.
• Conduct discovery sessions to gather detailed information on customer needs, pain points, and success criteria.
• Develop and manage customer technical relationships, identify and expand digital opportunities.

Solution Design & Architecture:

• Develop customized digital solutions that align with client requirements, leveraging Johnson Controls’ digital OpenBlue portfolio, including IoT, AI, and data analytics platforms.
• Create and present high-level architectural solutions that address client needs, ensuring scalability, flexibility, and efficiency.

Technical Support to Sales:

o Qualify opportunities in terms of customer technical requirements and contribute to the Go/No-Go recommendations.

• Collaborate closely with the sales team to provide technical expertise throughout the sales cycle.
• Assist in the preparation of proposals, RFP responses, and presentations, ensuring they are technically accurate and compelling.
• Act as a technical advisor and thought leader to clients during meetings, workshops, and demonstrations.

Internal & External Digital Advocate:

o Enable the branch eco-system on technical aspect of the OpenBlue Solutions.

o Identify & train external partners to expand JCI digital solution business market reach

Product Demonstrations

• Deliver compelling product demonstrations that highlight the value and capabilities of Johnson Controls’ digital solutions.
• Tailor demonstrations to specific client needs, showcasing how our solutions can address their unique challenges

Solution Validation & Product Roadmap:

• Work with internal product teams to validate and optimize solutions for client-specific implementations.
• Provide feedback to product development teams on client requirements and market trends to inform future product enhancements.

Post Sales Activities:

• Support delivery readiness and gathering required documents including Scoping documents, IT approval, technical support during implementation
• Support Customer Kick-off meetings.

Documentation & Training:

• Develop and maintain technical documentation, including solution architectures, integration plans, and client-specific configurations.
• Provide training to sales teams and partners on new digital solutions and architectural best practices.

Industry Knowledge & Trends:

• Stay informed about the latest trends in digital solutions, smart building technologies, and industry-specific regulations.
• Share insights and best practices with clients and internal teams to drive innovation and competitive advantage.

How you will do it:

Technical Skills:

• Strong understanding of digital solutions, including IoT platforms, AI, data analytics, cloud computing, OT Cyber security and smart building technologies.
• Good understanding of building protocols like BACnet, Modbus, OPC, MQTT and other BAS protocols
• Proficiency in architectural frameworks, integration methodologies, and solution design best practices.
• Experience with relevant software and SaaS application in built or industrial environment.

Soft Skills:

• Commercial acumen
• Excellent communication and presentation skills, with the ability to convey complex technical concepts to non-technical audiences.
• Strong problem-solving abilities and a customer-centric mindset.
• Ability to work collaboratively in a cross-functional team environment

What we look for:

• Bachelor’s degree in computer science, Engineering, Information Technology, electronics, instrumentation, communication or a related field. A master’s degree is a plus
• Relevant certifications in cloud architecture, IoT, networking, cyber security or other digital technologies are a plus
• At least 6-7 years of experience in built or industrial environment.
• Minimum of 5 years of experience in a solution architect or presales role, preferably within the digital solutions, IoT, or smart building technology sectors.
• Minimum 3 years of experience in designing or delivering energy efficiency, workplace optimization, Asset Management, Facility management, HVAC optimization or digitization SaaS application in built or industrial environment.
• Proven track record of successfully designing and presenting technical solutions that meet client needs and drive business outcomes.
• Proficiency in APAC local language, Chinese is a plus as this position will require to liase with Chinese speaking customers.

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

Assurity Trusted Solutions (ATS) is a wholly-owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

Middleware Administration

• Responsible for providing technical services to support environment provisioning, software integration and projects from deployment planning, setup & testing, pre-production readiness to production cutover;
• Hands-on experience on Middleware technologies such as Webserver Apache, IIS, WebLogic, JAVA & .NET based Application server, SSO server, Scheduling and Enterprise Backup;
• Responsible for software upgrades and patching ensuring that the platforms are performing to their potential & meet security compliance;
• Collaborate with Cyber Security and identify solutions for remediation of vulnerabilities in the web and middleware infrastructure;
• Developing and maintaining infrastructure/process logs, documentation, process metrics and capacity trending will be part of the daily activities;
• Participate in 24/7 support by acting as an escalation point for any production issues;
• Responsible for monitoring and optimizing the performance of middleware systems. This may involve diagnosing and resolving issues related to scalability, throughput, latency, and overall system efficiency.
• Work closely with developers, system administrators, and other stakeholders to understand their requirements and provide technical support;
• Stay current with trends and incorporate emerging technology to benefit the platform for on premise and cloud solutions;

Requirements

• At least 3-5 years of Middleware support experience, preferably in large-scale government projects;
• Candidate with strong infrastructure/technical background with knowledge on message-oriented applications in cloud-native architecture will have an advantage;
• Strong understanding of high-availability architectures. Hands-on experience in Clustering, Load Balancing and failover management;
• Work under minimal supervision and take ownership of middleware incidents end to end
• A good working knowledge in UNIX-platform based Web-App administration is a must;
• Good verbal and written communication skills.
• Strong analytical and problem solving skills.
• Good interpersonal and team management skills.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions! The remuneration package will commensurate with your qualifications and experience.

Interested applicants, please click "Apply Now".We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Job Description

The Applications Development Engineer role is within the product division that designs and manufactures inspection and review equipment for the semiconductor manufacturing industry. Based in Singapore, the Applications Engineer will be responsible for product penetration/adoption and process optimization at customer facilities in fabs.

This includes gaining expertise on KLA equipment and customers’ semiconductor fabrication processes and applying them to solve critically important production problems.

The role also includes training customers and other applications engineers, handling/driving local applications issue processes, investigating customer technical needs/problems and providing solutions, conducting final acceptance, demonstrating products, and understanding competitive situations, methodology, and performance group analysis.

Characterization of new systems and features includes crafting and conducting experiments, collecting data, and publishing results and recommendations in the form of application notes, best-known methods, or

characterization studies.

Minimum Qualifications

• Minimum Bachelor's Level Degree in Engineering and related work experience of 8 years.
• Work experience in semiconductor processing or the equipment industry is preferred.
• This role requires up to 70% travel on short notice, including extensive international travel and working with other global cultures.
• Teamwork is critical, so having a good balance between technical skills and people skills is important.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Tender Engineer (Power System) to make an impact!

This position is accountable for preparing a response to the Request for proposal/Quotation on moderate size and complex Customer’s opportunity, from start to finish, so that the response offered the best Value Proposition. This includes reviewing the RFP/RFQ, determining the scope of works and tasks, determine the best product/equipment/software/services offers, liaising with factories and vendors, challenging the factories and vendors’ offer, costing and determining the market price level, working with various internal stakeholders, i.e. opportunity leader, business leader, project management, engineering, solution purchaser, legal, contract management, solution risk management, analyze risk and opportunities etc. To prepare/revise the offer till the closure of the opportunity, attend and support bid clarification with the opportunity leader, organized Contract Review as well as hand-over package to the project management team. This position is expected to be self-driven, taking ownership and initiative to complete the require task within the timeframe agreed with the Opportunity Leader.

What you will do:

• Take ownership of the tender process and drive the submission of the Offer
• Analyze request for proposals (RFP)/ request for quotation (RFQ) from Customer and determining the scope of works and tasks
• Liaise with factory personnel in preparing proposal packages and advising on technical matters to prospective clients / consultants
• Ensure and comply to company tendering process
• Build techno-commercial proposals by using standard tools and processes and integrating validated data provided by technical and commercial support functions.
• Prepare costing as per requirements and complete submission of Offer within deadline.
• Understand risk analysis and apply into the offer.
• Ensure compliance of Solution Risk Policy and coordinate for approval
• Conduct contract review with the required stakeholders to ensure contract alignment.
• Prepare and handover of opportunity to Execution & Project Team

What qualifications will make you successful for this role?

• Degree/Diploma in Electrical/Power Engineering
• At least 2 years of relevant experience in Tendering process and good experience and strong knowledge in Electrical Distribution equipment, systems and solutions especially Medium Voltage Switchgear
• Knowledge of Electrical industry, EPC and customers’ base in various segments such as Oil & Gas, Utilities, Commercial Buildings and other segments
• Adaptability and Teamwork oriented mindset
• Customer focused mindset and fluent in English language.
• Good communication skills and previous Commercial or Project Management experience would be an advantage.

Profile Summary:

The Senior Systems Engineer supports security systems and operations administration, monitoring and maintenance. Monitors security alerts and events. Collects and documents contextual information based on established practices and supports the preparation and publishing of security advisories. Assists with the analysis of security-related information and events, escalation of incidents for validation and remediation.

Able to be alert and vigilant in performing monitoring activities, and is able to analyze and resolve security-related issues critically. He/She communicates clearly in his/her interactions with others and coordinates effectively with his/her team to perform security operations.

Roles & Responsibilities:

Monitor security systems

• Perform non-routine security monitoring activities

• Perform prioritization and allocation of security incidents

• Track security monitoring rules and alerts

• Compile regular reports on the performance of security operations

Maintain security operations

• Assist with the implementation of agreed security system changes and maintenance routines

• Assist with implementation of new security programs

• Support vulnerability, penetration testing and assessments

• Support the development of reports on security penetration testing results

• Recommend security products, services and/or procedures

• Support the alignment of security systems with established service agreement standards

• Support the implementation of new enterprise security architecture, technologies and enhancements

Respond to queries

• Support live response to security issues

• Support investigation of security breaches such as forensic threat investigation

• Support the resolution of security related issues

• Support the simulation of user problems to identify security system drawbacks

• Recommend security system modifications to reduce user problems

Facilitate compliance

• Assist with the implementation security policies, procedures and programs

• Educate users on the security standards and practices

• Identify improvement areas to existing security policies and procedures

• Deliver user training

Optimize security system performance

• Support piloting of new tools, technologies, and processes as well as installation of hardware and software

• Support security system testing and ongoing optimization or changes such as scheduled upgrades and updates

• Maintain documentation of all optimization activities

• Suggest improvements to operational processes, procedure manuals, and documentation

Requirements/ Qualifications:

• Minimum Bachelor in Computer Science or equivalent
• 2-3 years of relevant experience
• Experience in firewall, network scanning or asoc
• Possessed Risk assessment experience
• Required to be on standby with on-call availability with varied shifts including nights, weekends and holidays.
• Experience in AD/ID administration as per best security practices
• Exposure in IM8 or equivalent

• Recognised degree in civil engineering, construction management or related field.
• Minimum 5 years of experience in construction planning and preferably in MRT or large scale infrastructure projects.
• Profeciency in construction progress planning, data analysis and using BIM software such as Primavera P6, AutoCAD, Navisworks, Power BI & etc.
• Strong understanding and knowledge of tunnelling and underground construction and cut and cover technigues.
• Proven ability to analyse critical paths, manage project timelines and adapt plan effectively.
• Monitor project progress and adjust plans as necessary to mitigate risks and meet deadlines.
• Preparation of progress reports by forecasting and identifying delays and bottlenecks.
• Familiarity with ERSS walls, pile extraction, contaminated ground, railway protection requirement, WSM and large diameter bored tunnels.
• Able to work under pressure and manage multiple priorities.
• Applicants are required to submit their detailed CV and indicate the current and expected salary.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

In this role you will be accountable for:

• Design and conduct bench-scale test and pilot testing related to the company's separation process technology. Some tests may required rotating shift schedule.
• Develop and review validation protocols for bench-scale test and pilot testing
• Investigate and resolve discrepancies identified during bench-scale test and pilot testing
• Collaborate with process engineers to develop new technologies and improve existing ones
• Work with the sales team to develop commercialization strategies for new technologies
• Stay up-to-date with industry trends and emerging technologies related to separation processes

To succeed in this role, you will need:

• Degree in Chemical engineering, Biochemical engineering, Environmental engineering or related fields
• 2 to 5 years of analytical testing experience in pharmaceutical, petrochemical or flavor and fragrance environment.
• Knowledge of separation processes such as distillation, liquid-Liquid extraction, and crystallization.
• Experience designing and conducting bench-scale tests and pilot testing, as well as experience developing and reviewing validation protocols is an advantage.
• Basic knowledge and experience in analytical chemistry, including experience with various analytical equipment is an advantage.
• Awareness for safe handling of chemicals, potentially dangerous materials and equipment.
• With process engineering background are welcome to apply.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

Project Overview

The AMR IRG is an interdisciplinary community of biologists, engineers, and clinicians from MIT and Singapore, sharing a state-of-the art research facility and united by a commitment to providing a supportive intellectual environment where students and staff can learn, grow, and contribute to solving a pressing societal problem.

The objective of this project is to advance the field of RNA analysis by developing and implementing innovative analytical tools. These tools will be used in a comprehensive study of all forms of RNA -- the ribonucleome -- and the >170 RNA modifications -- the epitranscriptome -- in disease pathobiology, host-pathogen interactions, biomarker development, and therapeutic target discovery.

Responsibilities

The Research Engineer will plan and conduct experiments with the aim of studying the roles of RNA modifications in human immunue diseases. The candidate will work primarily on cell culture, RNA isolation, and chromatography-coupled mass spectrometry analysis. As part of this work, the candidate will prepare results for publication, be a liasion with the AMR IRG community, work with external collaborators, and develop strong experimental and communication skills.

Requirements

• B.S. or M.S. in biochemistry, molecular & cell biology, bioengineering, chemical engineering, or a related field.
• Experience in cell culture, RNA extraction, high-performance liquid chromatography or mass spectrometry are prefered. Strong proficiency in oral and written communication in English. Ability to work well with others and as part of a team.

To apply, please visit our website at: https://portal.smart.mit.edu/careers/career-opportunities

Interested applicants are invited to send in their full CV/resume, cover letter and list of three references (to include reference names and contact information). We regret that only shortlisted candidates will be notifie

Responsibilities:

• Performs the set-up, calibration, testing and troubleshooting of circuits, components, instruments and mechanical assemblies
• Determines and may develop test specifications, methods and procedures from blueprints, drawings and diagrams.
• Tests and troubleshoots assemblies and/or final systems. May complete rework on assemblies and/or systems as a result of testing.
• Prepares technical reports summarizing findings and recommending solutions to technical problems.
• May assist in the selection and set-up of specialized test equipment.

Requirements:

• Diploma or Bachelor Degree in Engineering.
• Ability to read technical drawings/procedures and use a variety of precision testing and measuring instruments.
• Previous hands-on experience with semiconductor equipment
• Experience with optics alignment will be adventagous
• Strong troubleshooting and analytical skills to resolve technical problems, set up experiments, and perform data analysis.
• Excellent communication, teamwork, and people skills are required.
• Comfortable working in shifts and cleanroom environment

Why choose Logicalis?

As Architects of Change, Logicalis' focus is to design, support and execute clients' digital transformation by uniting their vision with their technology expertise and industry insights. The company, through its deep understanding of key IT industry drivers such as security, cloud, data management and IoT, can address customer priorities such as revenue growth and business, operational efficiency, innovation, risk and compliance, data governance and sustainability.

We strengthen our purpose: to design, support, and execute our customers' digital transformation by converging their vision with our technological expertise and knowledge of the industry. The brand refresh underpins both the evolution of Logicalis’ positioning as well as our strategic vision for growth.

Responsibilities:

• Implementing network and security solutions: Responsible for implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices like Aruba. Racking and Stacking network devices. Expected to handle small to mid-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network and security delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to client and internal operations team.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 1-5 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNA/CCNP qualified with related professional experience, CCIE would be an advantage.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role. We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

Job Purpose:

The Sales Engineer is responsible for driving the revenue growth of his / her portfolio within the SEA region for both the advanced materials (coating services) and the industrial equipment business units.

Responsibilities:

• Participate in the formulation and drive execution of the sales and marketing strategy within the SEA region (Singapore, Malaysia, Thailand, Indonesia, Vietnam, Philippine, Indonesia) to deliver sales revenue growth within the 3 years business plan.
• Actively collaborate in collaborative market research into regional markets to identify clear target customers with defined market segments and application groups defined in the strategy.
• Lead and drive strategic sales initiatives for the SEA region, collaborating with the required internal resources to identify and acquire qualified leads and ultimately create new opportunities. These initiatives will include sales campaigns (personal selling, LinkedIn, etc), exhibitions, seminars etc.
• Lead and cultivate strong customer relationships with all key customers and key business opportunities. Engage and develop key stakeholders on the customer side and devise clear plans to drive opportunities through the sales process to win business.
• Opportunity Management: manage all opportunities with a clear roadmap through the sales process, managing where necessary projects with clear objectives, goals, milestones, and timelines to win customer business.
• CRM: Work professionally within the CRM tools / framework to ensure best practices in customer relationship management.
• Solutions & Product knowledge: continuously develop a deep understanding of the markets, applications, solutions, and product portfolio of Nanofilm and its target customers.
• Business responsibility to define with management the most relevant business model / offering to our customers, to balance the strategy of Nanofilm and to meet customer needs to win business.
• Negotiation skills to navigate customer negotiations on all business and contractual topics such as NDA, Sales Contracts, Negotiation commercial terms, etc.
• Reporting, providing regular reports on status, progress, and planning for the S&M activities in the region. Including forecasting, monthly updates, etc.

Requirements:

• Bachelor's in engineering Discipline
• 3- 5 years minimum experience in B2B Materials Technology and related industries
• Aggressive in meeting sales targets and results- driven.
• Confident, independent, target-driven, and goal-oriented with a proactive approach to generating and converting prospects into actual sales.
• Excellent communication skills and competitive sales approach
• High degree of commercial acumen matched with a strong customer-focused approach.
• Knowledge of International business practice and regulation has an added advantage.
• Ability to assimilate and understand technical information regarding vacuum coating technologies and sell on technical capabilities.
• Strong analytical skills to evaluate market opportunities and benchmark competitors technically and commercially.
• The initial work location will be at 28 Ayer Rajah Crescent. The company is scheduled to relocate to the HQ office at 11 Tai Seng Drive in 2025.

Roles & Responsibilities

Job Description & Requirements

Be involved in the planning of civil engineering works.

To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients.

Any ad-hoc duties as assigned by the Manager.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

Job Summary:

The Senior Civil Engineer assists the Construction Manager in performing engineering duties in planning, designing, and overseeing the construction and maintenance of current upcoming Civil projects.

The Senior Civil Engineer shall supervise all civil, structural, and geotechnical building works, including structural elements for architectural work, building services, electrical and mechanical (M&E), and specialist engineering works for compliance with the PUB/LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.