Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Description:

• Perform CPU design integration and IP development for ARM based CPU subsystem.
• Derive and develop Application or Subsystem PPA (Performance, Power, Area) optimization initiatives.
• Support SoC in MCUSYS Subsystem from Technical Feasibility Evaluation phase to Post-Silicon debug phase.

Job Requirement:

• Bachelor's Degree/Master's Degree in Electrical/Computer Engineering.
• Min 10 years of CPU related Architect/ RTL/ Verification/ Implementation design experience.
• Familiarity with ARM/MIPS/SNPS ARC CPUs.
• Cross-site working experience is a MUST.
• Experience with Foundry, Post-Silicon, FPGA, DVT, SLT debug is a PLUS.
• Smart-Phone Adv. ASIC consumer product HW design experience is a PLUS.

Hardware Engineer (Electronics Circuit Design)

Job Description Summary

The incumbent will collaborate across engineering teams to develop, modify and build electronics circuit designs that will meet the evolving needs of our customers. The role offers the incumbent the opportunity to participate in multiple phases of product development and production activities and to be part of a team whose expertise ensures the success of our engineering projects and programs.

Key Job Accountabilities

• Responsible for the design of ARM-based single board computer with many unique input/output interfaces
• Involved in the complete project life cycle from feasibility study through circuit design, prototyping, test, and integration to the preparation of production documentation
• Work closely in a multi-discipline project team to design, integrate, qualify, test and produce rugged airborne electronics system
• Provide technical leadership to a design team and support project management functions (for Senior Engineer position)

Required Experience and Qualifications

• Responsible for the design of ARM-based single board computer with many unique input/output interfaces
• Involved in the complete project life cycle from feasibility study through circuit design, prototyping, test and integration to the preparation of production documentation
• Work closely in a multi-discipline project team to design, integrate, qualify, test and produce rugged airborne electronics system
• Provide technical leadership to a design team and support project management functions (for Senior Engineer position)

Reporting Relationship

• The incumbent reports to Sr Director, Avionics Product Devt

Work Location

• 507 Airport Road, Singapore 539936

Job Description & Requirements

· Manage and monitor all installed systems and infrastructure

· Install, configure, test and maintain operating systems, application software and system management tools

· Proactively ensure the highest levels of systems and infrastructure availability

· Monitor and test application performance for potential bottlenecks, identify possible solutions, and work with developers to implement those fixes

· Maintain security, backup, and redundancy strategies

· Write and maintain custom scripts to increase system efficiency and lower the human intervention time on any tasks

· Participate in the design of information and operational support systems

· Provide 2nd and 3rd level support

· Liaise with vendors and other IT personnel for problem resolution

Requirements and skills

· BS/MS degree in Computer Science, Engineering or a related subject

· Proven working experience in installing, configuring and troubleshooting UNIX /Linux based environments.

· Solid experience in the administration and performance tuning of application stacks (e.g.,Tomcat, JBoss, Apache, Ruby, NGINX)

· Solid Cloud experience, preferably in AWS

· Experience with virtualization and containerization (e.g., VMware, Virtual Box)

· Experience with monitoring systems

· Experience with automation software (e.g., Puppet, cfengine, Chef)

· Solid scripting skills (e.g., shell scripts, Perl, Ruby, Python)

· Solid networking knowledge (OSI network layers, TCP/IP)

We are a world leading supplier of climate solutions for the future. We offer innovative, efficient and sustainable solutions for customers in industries where controlling indoor humidity, temperature and energy efficiency is mission-critical. Together, we work to support our customers in creating a healthier planet. Come work for us and be part of this exciting journey.

About the job

We are looking for a dynamic and skilled Service Sales Engineer to join our team. In this role, you will be pivotal in expanding our service contract sales, and engaging with new and existing clients to meet our sales targets. Your expertise in mechanical engineering will be vital in providing tailored solutions and maintaining strong customer relationships. If you are a motivated individual with a blend of technical acumen and sales prowess, this role offers a challenging yet rewarding opportunity.

Role and Responsibility:

• Expand service contract sales, focusing on both acquiring new clients and retaining existing ones to achieve sales objectives and targets.
• Provide customers with quotations for spare parts, focusing on standard items.
• Establish and maintain ongoing, positive relationships with our existing customer base to secure and cultivate future business opportunities. This includes recommending equipment upgrades tailored to customer needs.
• Deliver accurate monthly sales forecasts and reports of area of responsibility.
• Ensure enforcement of all service jobs and purchases, ensure all are correctly captured, ordered, invoiced, and fulfilled in a timely manner.
• Participate in marketing initiatives to enhance sales performance.
• Perform any other tasks or duties as assigned by the Company.

Candidate Requirements:

• Minimum Higher NITEC or Diploma in Mechanical Engineering or a related field.
• At least 2 years of relevant sales experience in a similar role.
• Able to read, understand, and interpret technical manuals and schematics.
• Able to work independently and a team player with excellent interpersonal and communication skills.
• Must possess a Singapore Class 3 Driving License.

At Munters, you get the chance to influence and solve meaningful problems for society. We lead with an absession for climate, with people in the core and sustainability as part of the DNA.

Summary:

Skywork AI Singapore welcomes enthusiastic and forward-thinking research engineers to join our dynamic team at the Kunlun-2050 Research Lab Singapore. Being a new entrant in Singapore’s R&D landscape, we are dedicated to pushing the boundaries of Artificial General Intelligence (AGI) through foundational and application research, with a particular focus on Foundation Model 2.0 and Agents. Foundation Model 2.0 encompasses various dimensions, including pioneering new foundation modes and applications, optimizing training and inference acceleration, and conducting theoretical studies to enhance interpretability. Our work on Agents delves into both virtual and physical agents, propelling us into the forefront of AGI development.

We invite individuals who share our passion for AGI advancement and are eager to make their mark in the field to apply and become a vital part of our evolving team. Join us to contribute to cutting-edge research and explore the potential for technology transfer into Skywork AI's core products.

Key Responsibilities:

· Implement intricate algorithms and enhance model scalability

· Provide comprehensive engineering support to the research team

· Develop reusable libraries to support research in AGI field, focusing on Foundation Model 2.0 and Agents.

· Collaborate closely with our interdisciplinary team to publish influential research findings in top-tiered conferences and journals, making a significant impact on the AGI community.

· Actively explore technology transfer opportunities into Skywork AI's core products.

Desirable Experience:

· Hold a Bachelor’s degree or higher in computer science, statistics, engineering, applied mathematics, data science or related fields

· Possess more than three years of related work experience

· Demonstrated proficiency in programming languages

· Hands-on experience with deep learning frameworks and familiar with development tools

· Actively contribute to open-source projects

· Achievement in programming competitions and regional contests

· Attain esteemed recognition within the academic and professional community

Apply:

If you're excited to be part of our cutting-edge research team in the AGI space, please send your latest Curriculum Vitae to [email protected] to explore this exciting opportunity.

Skywork AI Singapore is committed to fostering diversity and welcomes candidates from all backgrounds to apply. Join us in shaping the future of AGI at Kunlun-2050 Research Lab. Your contributions can be instrumental in defining our journey as a new start-up in this dynamic field

Fabrica AI Electrical Engineer Intern - Invention of Automatic Tile Grouting Robots

Fabrica AI is creating a future where ideating and developing a robot for any task takes days, not years. We believe that by training end to end controls in simulation with reinforcement learning and above that iterating hardware designs, we can automate the whole development process. At the current stage, the most important resource is a large fleet of robots to validate our approaches for our AI system and to collect data. This would help keep us grounded in reality.

To start building up the fleet, we invented an automatic tile grouting robot that boosts productivity by 5x and are piloting it on construction sites in Singapore managed by Woh Hup, BHCC, Gin Chia, Soilbuild, and Dragages. This should correspond to about 30% of the Singaporean market. We have early leads in the US and Europe as well. Tile grouting is the process of filling up the gaps between tiles after the tiles have been laid. Grouting is part of virtually every construction project and a highly laborious process, is considered one of the most physically damaging tasks resulting in tilers’ knees and back issues, and thus quality issues would also arise. We invented a patent pending robot that is able to automatically grout and clean tile gaps with only a press of a button. The operators would only need to reload grout and water.

We have also pitched at the Built Environment Demo Day 2022 organised by BCA as part of the International Built Environment Week (IBEW) and won the Rising Star Award. IBEW has drawn more than 10,000 individuals from over 100 countries.

Recently, we had a Presentation to Deputy Prime Minister of Singapore: https://www.linkedin.com/feed/update/urn:li:activity:7034394354731413504

We have also raised 850k USD from Hoxton Ventures to enable our development in not just our tile grouting robots but also other forms of construction automation.

Website: https://www.fabrica.ai/ Latest Demo:

https://youtu.be/MoOgIkGSc28

You may be remunerated with a combination of salary and share options.

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

Job Description

• Design and develop automotive display products (instrument clusters and display solution)
• Develop products according to project life cycles from requirement analysis, concept definition, detail design, design verification, off-tool validation until release for mass production.
• Prepare engineering documentations, specifications and reports.

Qualifications

• Degree in Mechanical Engineering or similar.
• Advance skill in CAD modelling software CATIA and CREO.
• Product design for plastic injection molding, metal stamping and die casting.
• Knowledge in plastic optical component design.
• Knowledge of secondary processes such as laser cutting, plating, vacuum metallization, in-mould decoration, spray painting, hot stamping, silk screen, etc.
• Strong knowledge of design analysis and tolerance stack calculations.
• Experience with design for manufacturing and troubleshooting.
• Knowledge in soft and hard tooling for prototype making and mass production.
• Good attention to details and able to learn independently in a dynamic environment.
• Team player with good communication skills.
• Self-motivated with a strong passion for product design work.
• Customer-oriented and able to work systematically under tight schedules.
• Willing to travel for work attachment and training.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Diploma/Bachelor's degree in Civil & Structural Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Fresh graduate is welcome to apply

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 3 - 5 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Degree in Civil Engineering / Geotechnical Engineering with 5 to 8 years experience in Geotechnical and Structural Instrumentation works especially working experience in Singapore MRT Projects.

Job Description & Requirements

• Conduct Geotechnical Analysis, Soil Classification, Data analysis and interpretation of instrumentation works Submit progress/ technical reports and assessment on geotechnical issues on site.
• Responsible for all on-site geotechnical and engineering issues pertaining to site matters.
• Coordinate with sub-contractors and attend to clients for queries. To conduct the geotechnical investigation and/or instrumentation projects to meet the schedule and specified requirement
• To prepare and submit factual and/or engineering reports on the respective projects
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Overview

Responsible in overseeing the performance of outsourced maintenance service provider for mechanical and fire safety related services and in functionality as well as serviceability at all times. To audit and monitor the service standard rendered by specialist vendors and outsourced maintenance service provider. To support the GFM Site Lead, Mechanical and Fire Safety Lead in capital nature replacements for installed mechanical systems and building improvement projects. Beside daily business as usual activities, supporting and involvement

phase) are norms to minimise services and operation disruption.

Job Responsibilities

• Work closely with FM Site Lead, Mechanical Lead and Fire Safety Trade Lead, in building clear scope, expectations and deliverables for the Mechanical and Fire Safety teams as well as planning for specialty training and develop the capabilities of Mechanical and Fire Safety Team members.
• As a Subject Matter expert to assist the Mechanical and Fire Safety Lead in ensuring team members understands their scope.
• Work closely with team members, service provider and specialist vendors on system breakdown investigations, inspections, audits, review of maintenance program, etc.
• To lead / provide support in the investigation of incident/system failure to determine root cause of failure as needed.
• To participate and support in audits that the hospital subscribes to.
• Oversee, monitor and manage Mechanical and Fire Safety systems/ services and specialist vendor contracts to ensure timely renewals and contract requirements are fulfilled.
• Ensure timely renewal of authority licences and permits.
• Ensure processes are in accordance and compliant with Audit Risk Committee recommendations, NUHS Contract Management, Procurement and Finance Policies and Processes.
• Be familiar and ensure compliance with SCDF fire codes and/ or SSCP as well as to be up to date with any amendments being in place.
• To respond and support the maintenance agent and vendors in mitigating and recovery of critical system failure or incident.
• Work closely with FM Admin team on compilation of contract documents, such as agreement, checklist, warranties, etc.
• Perform invoice verification against works completed for timely processing of invoices.
• To ensure repair to reported system fault and breakdown are carried out in a timely manner.
• To carry out monthly analysis to Mechanical/ Fire Safey systems breakdown and recommend improvement plan as needed.
• Conduct internal audits to check on non-compliances, identify gaps and follow-ups till closure.
• Represent Mechanical/ Fire Safety Team as the liaison party on authority matters.
• Review and update Standard Operating Procedures (SOP) and working instructions as required.
• Develop and harmonise trade related SOPs, Preventive Maintenance Checklists and working instructions with the cluster institutions for alignment to prevailing Singapore Standards / Code of Practices and/or industry best practices for benchmarking.
• Plan and oversee Mechanical/ Fire Safety system upgrades/improvements or replacements before their expiration or its end of life through MOHRR or CAPEX funding.
• Project Manager or render support to Project Managers for improvement works to existing hospital facilities such as renovation and retrofitting, replacement of system infrastructure and improvement initiatives to existing specialized systems and hospital facilities.
• Prepare Approval To Purchase (ATP) and Approval To Award papers for Preventive Maintenance Contracts and projects.
• Maintain good documentation (e.g records of all contracts, reports, agreements, checklists) with FM Admin team to ensure full compliance.
• Keep abreast of technical developments particularly associated with technology in building engineering services and building management and in all aspects of the mechanical, electrical and fire safety disciplines.

Requirements

• Bachelor degree / Diploma in Mechanical Engineering or Facilities Management or equivalent.
• Minimum five (5) years of relevant experience in management of mechanical systems operations. (Note: Minimum 8 years for Diploma Holders).
• Experience in the operations and replacement of Fire Safety/ Alarm System, Medical Gas/Vacuum System, Lift and Escalator System, Pneumatic Tube System is advantageous.
• Certificate in Fire Safety Manager/ Fire Safety Officer or WSH.
• Good interpersonal skills and customer service oriented.
• Positive work attitude, ability to work with all levels of staffs and strong team player.

Job Description
Products (digital clusters, display solutions, and head-up displays).
Development includes technical requirements definition, concept creation, architecture design, deviation review and negotiation with supplier, design review, performance evaluation/optimization, specification creation, failure analysis and support part qualification till mass production.
Define, align and track display components’ development milestones & schedule, and budget to ensure deliveries to customers.
Manage and lead in display component-related technical discussion with suppliers and internal project team members.
Prepare engineering documentation, specifications and reports.
Follow both project implementation and quality management rules in realization of the display components.
Develop new display / touch panel technologies in preparation for application in future Automotive products.
Work closely with supplier quality management and category management in new supplier development and introduction.

Qualifications
Degree in Electrical & Electronics / Mechanical / Optics Engineering with at least 3 years’ working experience in development of electronic products.
Good project management skills, including project planning, resource management, budget tracking, status reporting, and risk management.
Knowledge and experience in display / touch panel development, and optical metrology will be an advantage.
Knowledge and experience in display driving electronics, graphics processors, display interfaces, analogue/digital electronics, and microprocessor-based designs.
Knowledge of FMEA, EMC and Automotive quality standards.
Good attention to details and able to learn independently in a dynamic environment.
Customer-oriented and driven to work proactively & systematically under tight schedules.
Good interpersonal and communication skills to interact with different levels of people, including suppliers and customers.
Chinese language skills an advantage as incumbent is required to liaise with counterparts and vendors from countries like China.
Willing to travel overseas for training and/or projects on short notice.

Job Summary:

• Industry: Healthcare
• Employment type: Permanent

Job Responsibilities:

• Provide technical support to all hospital personnel in the commissioning, operation, maintenance and de-commissioning of medical equipment
• Supervise the specialist vendors and appointed contractors on medical equipment maintenance works to ensure quality of works and compliance with required standards
• Update and collect feedback from users regularly on the maintenance, performance, reliability and quality of medical equipment
• Check, analyse and investigate faults/complaints/hazards on medical equipment and assist BME engineers in mapping out and implementing required action plans
• Ensure quality of work conforms to standards and practices that the hospital subscribes to, including other quality initiatives driven by hospital and department
• Manage stock and spares for front-line technical support and assist stock supervisor in documentation
• Assist BME engineers in coordinating services for medical equipment projects with vendors, contractors and appointed project consultants
• Perform any other duties and tasks as assigned by BME engineers

Job Responsibilities:

• Preferably a Diploma in Electronics/Biomedical Engineering OR Vocational Training
• Certificate in Electronics/Electromechanical/Mechatronics Engineering
• Practical experience of at least 3 to 5 years in a healthcare setting preferred
• Good communication and supervisory skills
• Customer service oriented
• Positive work attitude and the ability to work with all levels of staff
• Basic IT skills needed
• Candidates with more experience may be considered for a senior position

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only shortlisted candidates will be notified.

Registration No: R23113834

Job Description Summary

Be part of a team responsible for the development, integration and testing of military Unmanned Aerial Vehicle (UAV) avionics systems and Ground Control Stations (GCS) to meet the operational and mission requirements of our customers.

You will be involved in the complete project life cycle, from feasibility study, system requirements definition, system architecture design, to integration, troubleshooting, acceptance testing, user training and engineering support of the UAV system.

Required Experience and Qualifications:

• Degree in Electrical, Electronics or Computer Engineering with an aptitude for electronics hardware and systems design
• Knowledge of avionics I/O interfaces (TCP/IP, UDP, MIL-STD-1553B, Serial, Discrete etc.) will be an added advantage.
• Able to work independently with strong problem-solving and analytical skills.
• Good written and verbal communication, interpersonal, and organizational skills
• Open to overseas posting for up to 2 years.
• Entry level candidates are welcome to apply.
• Successful candidates with relevant experience may be considered for senior position.
• Open to Singaporeans only

Reporting Relationship

• The incumbent reports to Senior Principal Engineer, UAS/Ground Platform

Work Location

• 540 Airport Road, Singapore 539938

As a Software Engineer in Thales Embedded Product Development Team in ECC, you will participate in the design, implementation, validation and deployment of Embedded Products for major OEM customers.

Responsibilities:

• Develop, validate and deploy new software components (for example advance software security mechanism and next generation IoT connectivity protocols) for embedded operating systems targeted for mobile and IoT devices, in applications such as mobile payment, digital identity and IoT connectivity
• Participate to the development of next generation operating systems for future devices
• Being in agile development environment to work closely within team and multiple teams around the world to build great products exceeding customer expectations
• Contribute to continuous product and development methodology improvement

Requirements:

• Degree in Electrical/Electronics/Computer Engineering, or related fields
• Proficient in C/Java programming languages
• 2-5 years of experience in embedded software development
• Knowledge of embedded technologies/ecosystem, software security or Javacard knowledge is a plus
• Team player with good communications and collaborative skills

Position Overview: We are seeking talented Software Engineer(s) to join our dynamic team based in Singapore. The ideal candidate will have a passion for software development, aerospace technologies and a willingness to learn. Some working experience is preferable but not essential. You will be responsible for execution of a full SDLC (Software Development Life Cycle), including designing, developing, and maintaining mission-critical software for aircraft applications. Join us for the opportunity to make a meaningful impact in the aerospace and defence industry.

Key Responsibilities:

• Collaborate with cross-functional teams to gather requirements and define software specifications for aircraft mission-critical systems.
• Design and develop robust, scalable, and efficient software solutions that meet aerospace industry standards and regulatory / authority requirements.
• Implement real-time software, data processing software, and control systems software for onboard and offboard aircraft applications.
• Perform thorough testing and validation of software components to ensure reliability, safety, and performance under various operating conditions.
• Participate in DevOps / DevSecOps activities, including continuous integration, deployment automation, and security enhancements.
• Document design processes, including development, testing, analytics, and troubleshooting.
• Conduct code reviews, provide constructive feedback, and contribute to a culture of continuous improvement and knowledge sharing.
• Work closely with hardware/firmware engineers and avionics systems engineers to integrate software with onboard avionics systems and ensure seamless functionality.
• Stay updated on the latest advancements in aerospace technology, software engineering best practices, and industry trends and standards to drive innovation and competitiveness. (e.g. Kubernetes, Docker, Type 1 Hypervisors, DDS, ARINC 653, Generative AI).
• Overseas travel or deployment can be expected.

Qualifications:

• Bachelor's or Master's degree in Computer Science, Computer Engineering, or equivalent field.
• Singapore citizenship is required for this position.
• 2 to 6 years of working experience in software development is preferable but not essential. Fresh graduates with relevant experience are welcome to apply.
• Proficient in C/C++, Python, and Dot Net programming languages/frameworks, with a willingness to learn other software technologies as needed.
• Expertise in developing, testing and debugging production-quality, scalable, multi-threaded, concurrent systems.
• Able to apply Object Oriented Software design patterns effectively.
• Proficient in identification of code smells and effective in code refactoring.
• Familiarity with software development methodologies including Agile, and experience working in Agile environments, version control systems, software test frameworks, and software testing techniques.
• Interest in DevOps / DevSecOps practices and a willingness to contribute to related activities.
• Strong analytical thinking and problem-solving skills, with a keen attention to detail and a commitment to delivering high-quality results.
• Excellent communication skills and the ability to collaborate effectively with multidisciplinary teams.
• Able to work under tight deadlines while coordinating several projects at a time and responding to changing business and technical conditions.
• You are a self-motivated, independent, and high-performing individual. You learn quickly and enjoy solving worthy challenges.

The following skillsets would be an added advantage:

• Experience with network troubleshooting/problem resolutions, protocol analysis, network troubleshooting/problem determination skills with network trace/capture/analysis software (Familiarity with network security technologies and products is a plus).
• Experience with distributed systems concepts and client-server architectures.
• Knowledge of relational databases, SQL, JSON, XML and XPath for handling of both structured and unstructured data.

Location: This position is based mainly in Singapore (Paya Lebar), with travel opportunities.

Benefits:

• Competitive salary and performance-based bonuses
• Comprehensive insurance plans and health / dental benefits
• Professional development opportunities
• Exciting projects and the opportunity to make a meaningful impact in the aerospace and defence industry

How to Apply: Interested candidates are to submit their resume and a cover letter detailing their relevant experience and why they are passionate about joining our team. Please include examples of your work or projects that demonstrate your expertise in software development.

Job Description

• Plan, propose, coordinate and execute services diversion routing plan on road
• Liaise with clients, consultants and sub-contractors on project coordination
• Liaise with utility agencies e.g. SPPG, telco & etc
• Supervising and managing the site construction activities carried out by subcontractors
• Prepare documentation (method statements, risk assessments, safe work procedures) for timely submission and review

Requirements

• Equip with knowledge of NCE application
• Minimum 5 years of engineering experience in relevant field and at least 2 years’ relevant experiences in the coordination with utility agencies for utility diversion works
• Candidate with Register Earthwork Supervisor Certificate is preferred

Overview

We are looking for Facilities Engineers with strong expertise in maintenance of Electrical systems and facilities operations to join our Facilities Management team. The Facilities Engineers will be participating actively in the Kent Ridge Campus (KRC) Master Plan program and interfacing withrelevant stakeholders over different phases of its implementation. They will work with appointed

consultants to develop feasible and sustainable technical proposals and/or strategies to meet thehospital operations requirements of the future as well as minimising electrical services disruption in the course of demolition and development works planned. Lastly, these Facilities Engineers essentially are to assist in overseeing the performance of outsourced maintenance service provider to the hospital in completing the maintenance program to ensure the availability and functionality of the installed Electrical systems at all times.

Job Responsibilities

You will be responsible for the following:

a. Provide technical support and assistance to the KRC Master Plan Project team to access and acquire information on the hospital’s infrastructure and installed systems.

b. Attend and participate in relevant meetings (design planning, interface, technical clarification, etc) as per planned schedule to provide technical inputs as needed.

c. Support and input to the consultants’ technical & design proposal to meet hospital’s operation needs and minimising Electrical services disruption.

d. Coordinate internally for design and interface coordination through the various transition phases of the KRC Master Plan.

e. Review and input to proposed work plans and schedules to achieve control, compatibility and coordinated objective to avoid and minimise operation disruptions.

f. Assist in the management of the appointed maintenance agent and specialist system vendors in their maintenance scope and planned program including breakdown investigations, inspections and audit.

Requirements

Qualification Required and Area of Discipline

Degree Holders:

- Engineering degree (Electrical/Electronics/Technology or related discipline)

- 10 years of relevant working experiences



Diploma Holders:

- Diploma in Engineering (Electrical/Power/Technology or related discipline)

- 15 years of relevant working experiences

Required Competencies and Capabilities (Skills, Experiences and Professional Licences)

 1. Possesses good writing and presentation skills.

 2. Positive work attitude and ability to work with all levels of staffs.

 3. Previous experience in Electrical installation work is advantageous.

 4. Possesses BCA Green Mark certification and/or related experiences will be advantageous.

Job Summary

Development and execution of the project cost estimation, cost plan, monitor costs and collects cost data to ensure conformity with management's budget directives, cost tracking, forecasting and reporting.

Duties & Responsibilities:

• Support or lead in cost estimation for projects at various stages of the project development like FS, FEED and EPC.
• Study and understand all relevant project documents relating to the cost management of allocated projects.
• Establish project control budgets based on the client approved Project Control Estimate.
• Cooperate with Project Management Team in identifying and gaining approval of Estimates/ Change Requests.
• Perform a variety of cost engineering functions including cost control, budget preparations, forecasting, risk management, contingency quantification and cost reporting.
• Review cost commitment and expenditure information (for all cost elements), for input to the cost control and reporting system on a weekly basis.
• Prepare regular cost reports and advise management of any forecast cost overruns, to maintain comprehensive accessible registers of financial approvals, variations and change orders.
• Report turnaround and project actual vs baseline cost status as required.
• Report earned value per vendor and identify trends that impact the final cost projections.
• Prepare final cost report and invoice to client.
• Perform other functions that may be assigned by the Department Manager.
• Support in cost database input and evaluation of cost data.

Requirements:

• B.Sc. (Building/Project and Facilities Management) or
• Degree in any Engineering with cost engineering (cost estimation or cost control) internship and show interest in cost engineering or has five (5) years of working experiences as a minimum in the capacity as a Cost Engineer in the oil & gas industry, or
• Diploma (Certificate in Quantity Surveying) / Diploma (Project & Facilities Management).
• Basic knowledge of contract administration.
• Have understanding of measurement, cost estimation and project cost control requirements.
• Demonstrated success in past project involvement and technical delivery of small to medium size projects.
• Enjoy numeric calculation and proficient in Excel software.
• Excellent communication and interpersonal skills, written and verbal English.
• Good team player, self-driven with ability to interact across multiple disciplines.
• Proficiency in Microsoft Office package.

Interested parties, please send in your detailed resume.

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]