• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil/Structural Engineering / Building
• minimum 5 years structural coordinator experience
• Good knowledge of Structural specifications & requirements

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades such M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Min Diploma in Civil/Structural Engineering / Building
• Min 5 years structural coordinator experience
• Good knowledge of structural specifications & requirements

• Assist Principal Project Manager (PRPM)/Senior Project Manager (SPM)/Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on-site quality and safety issues
• Determine any non-conformances on works
• Liaise with the Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on-site issues are conveyed to the Contractor within a reasonable timeframe
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggests quality improvement measures for implementation on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Supervise the installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site
• Assist in the operating of the PMCC

Requirements:

• Min Degree in Civil & Structural engineering
• Min 2 years of viaduct and/or flyover or cut and cover tunnel experience in a project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Experience in civil/structural/geotechnical design will be an advantage.

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Job Description

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 2 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Role: Laboratory Engineer (Geotechnical/soil testing)

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Job description

• Carry out Indoor Air Quality monitoring
• Carry out Industrial Hygiene monitoring
• Carry out Noise monitoring
• Preparation of test reports

Requirements

• Degree in Environmental / Chemical / Mechanical Engineering or related field / certificates
• For fresh graduates / candidates with no experience, training will be provided
• Willing to work in outdoor environment, testing and monitoring is carried out at customers premises
• Proficient in Microsoft Office
• Class 3 license preferred

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

• Assist Principal Project Manager (PRPM)/ Senior Project Manager (SPM)/ Project Manager (PM) in day-to-day management of the contract
• Advise the PRPM/SPM/PM on site quality and safety issues.
• Determine any non-conformances on works
• Liaise with Contractor to rectify any non-conformances and document them properly
• Ensure that decisions on site issues are conveyed to the Contractor within a reasonable time frame.
• Ensure that works are carried out according to specifications, drawings and programme without compromising on quality and safety
• Provide feedback to the PRPM/SPM/PM on quality and safety matters and suggest quality improvement measures for implementation on site
• Supervise installation of instrumentation and monitoring of instrumentation
• Lead a team of supervisors to ensure full time supervision of works on site by supervisor /client

Job Requirement

• Minimum Degree in Civil and Structural Engineering
• Minimum 5 years relevant experience in project/construction environment
• Proficient in relevant software programmes for planning and project work
• Pro-active team player with good analytical and communication skills
• Required to have at least 2 years of viaduct and/or flyover construction experience

Job Requirement

• Recognised degree in Civil Engineering by PEB Board
• Mininum 3 - 5 years in design office
• Well versed and familiar with Government and Agencies regulations, requirement and submission procedure
• Experience in using Euro-codes in steel and concrete design
• Experience in utilising of structural Revit/BIM
• Able to handle project independently

Job Description

• Design and produce calculation and detailing for building structure and civil work
• Submission and obtain approval from relevant Authorities
• Attend meeting, project management and site supervision

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil / Structural Engineering / Building
• Min 2 years structural coordinator experience
• Good knowledge of Structural specifications & requirements

· At least 5+ years of software development experience

· Experience working with Java/ J2EE

· Experience with Sql Server or any other RDBMS

· A strong understanding of recent Java language features.

· An understanding/working experience with MQ.

· Experience with Maven, Git, writing and maintaining unit/integration tests.

· Experience in database performance tuning and optimizations.

· Web development (Java web development, HTML, Javascript, jQuery etc)

· Strong ability to analyze code

· Experience in working with Jenkins , Jira or a similar issue-tracking system

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

ROLE :

Maintain and enhance IT applications which includes implementing new enhancements to the applications, troubleshoot live issues to identify causes of the problems and providing workable solution to fix the issues.

Redevelop the existing e-services to cloud infrastructure and meet security (AIAS) requirements.

Perform design, programming, integration, system testing, assist users in User Acceptance Test (UAT), and documentation.

Generate unit tests and end-to-end test scripts using Azure technologies.

Troubleshoot, identify, solve issues and develop automated test cases to prevent similar issues.

See through all enhancements and fixes to ensure they are properly deployed to the testing and live environment within the agreed time. That includes working with the end users, server administrators, database administrators and the system analysts supporting the IT systems.

Experience and skills requirements

Degree in Computer Science, Information Systems, Information/ Infocomm Technology, Computer or Electronics Engineering or related discipline.

Must have minimum 3 years of working experience in this role and good experience in the following skills/technologies:

Frontend

JSP, JavaScript, Jquery, AJAX/JSON, ReactJS

Backend

J2EE (Weblogic, Tomcat) or Struts or Spring MVC or Spring Cloud or Spring Boot; Restful APIs; and

MS SQL or Oracle or PL/SQL.

Other requirements

Must have good communication skills and the ability to:

Understand and communicate in English, in speech and writing.

Work with other members in a dynamic and fast-moving team.

Work independently with minimum supervision.

Work on own initiative and adhere to deadlines.

Must have at least 3 years of good working knowledge in version control software like Git.

Added advantage with the following:

Development experience using Azure App Services, Spring Cloud, Tomcat, MS SQL, Azure DevOps Experience with RedHat Linus OS.

Spring MVC, Hibernate.

Experience in agile development and DevOps processes.

Experience in GIS map development.

Roles and responbilities

-Technical experiences in Mechanical or Facilities management related works Min 5 years

- Facilitate, manage and provide support and change management activities for all critical infrastructures within the building or client's properties. eg, ACMV, M&E, UPS, Generator Set, Fire alarm system, PA system, Passenger/ Fire, Goods Lift etc

-Assist manager to Prepare Budgetary quote for tenders

- Assist manager Prepare materials and order materials, planning etc

-Support on-site technicians and solving operations issue etc

-Able to read project drawing eg Auto CAD,BIM,SLD Diagram

-Project management

-Plan and implement preventive maintenance schedule and carry out regular inspections to properties and facilities.

-Ensure technical team to perform works in accordance to internal SOPs and BCA requirements

-Result orientated

-Meeting with clients

-Proactive and Self-discipline

Requirements

-A.Certificate or Specialist Dip in M&E Coordination / Dip in Mechanical Engineering (Green Building Technology)

B) Ngee Ann Polytechnic: Dip in i) Building Services Engineering ii) Technology (Building Services) iii) Technology (Building Services & Fire Safety) iv) Engineering (Building Services & Fire Safety)

C) Temasek Polytechnic: Dip in i) Green Building & Sustainability ii) Intelligent Building Technology

or equivalent skill or certs for Green Building services added advantage.

Here’s the bit about the opportunity.

As a Sales Engineer at Fireblocks in APAC, you will take full ownership and responsibility for your designated projects and clients, from the product sales demonstration up to the preparation of client onboarding. You will be expected to understand the competitive landscape and how other competing solutions and platforms operate, be a gatekeeper to the internal engineering groups, assist with POC setup and testing, give demos on all advanced features related to API, handle tier 1-3 knowledge transfer to customers, coordinate workshops, assist in customer onboarding, handle RFPs and more.

You’ll be

● Working within a supportive APAC-wide Sales Engineering team of highly motivated self-starters

● Supporting the Sales team through the entire client sales cycle from qualification to client onboarding

● Tailoring each demo to match the unique requirements of the customer to show how Fireblocks can support their Digital Asset goals

● Delivering in-depth technical presentations to C-level executives and cybersecurity professionals regularly

● Collaborate internally with Account Managers, Sales Directors and Product Managers

● Translating technical knowledge and terminology to non-technical audiences

● Managing multiple projects and preparing RFx responses simultaneously, each with its bespoke requirement.

You’ll bring:

● Experience in either a pre-sales or consulting position within a Fintech, Crypto or Cybersecurity company

● A high technical acumen with natural curiosity and willingness to dig deep into complex technologies

● Confident & concise communication with excellent presentation skills

● A demonstrable passion for Blockchain and the Crypto industry, whether it be a professional or a personal interest

● An analytical approach that intuitively connects the dots

● A proactive, self-starter mindset with an interest and knowledge of Banking, Financial Services or Fintech

● Enthusiasm when educating customers and colleagues

● The ability to work with Webhooks, REST APIs and perform basic scripting tasks

● Business level Korean proficiency desirable.

JOB SUMMARY:

The Applications Engineer is responsible for promoting the sale of the Division’s products which requires engineering knowledge sufficient to make judgments involving applications, installations, and economic consideration, as well as, handling all customer and distributor inquiries requiring technical assistance.

ESSENTIAL DUTIES & RESPONSIBILITIES:

This job description represents the primary areas of responsibility; specific position assignments will vary depending on the needs of the proposal department.

To perform the job successfully, an individual must be able to execute each essential duty satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Essential duties and responsibilities should be listed in the order of importance/majority of time spent.

• Primarily responsibility is to support sales in the quoting, designing, and costing of solutions to customer problems, including prompt responses to inquiries and questions.
• Handles application inquiries and recommends appropriate products with a high sense of urgency and in a timely manner.
• Provides quotations, both written and verbal, in accordance with ERP and company price lists, electronic quote tool and contractual discount schedules; performs necessary follow-up.
• Assists customers with troubleshooting problems, handles customer complaints, and solves problems in a prompt, professional manner; may be involved in investigating and reporting on warranty claims and return goods authorization (RGA) process.
• Performs costing analysis, when necessary, on product line items versus published pricing to arrive at gross margin calculation for review and approval by Applications and Sales Managers
• Coordinates customer delivery requirements with the Production Department
• Recommends modifications to standard products to meet individual customer requirements, within practical company and economic limitations.
• Takes necessary actions to increase sales of the Division’s products.
• Represents, on occasion, and if necessary, the division at trade shows as well as potential visits to customer for sales or service-related activities.
• Assists in creating marketing literature, website development and other system tools to boost productivity and sales.
• Performs other duties of a similar nature and level as assigned.

EDUCATION AND EXPERIENCE:

• Bachelor of Science degree in Engineering or equivalent experience with plant emission control design
• 2-3 years of experience developing system design for nuisance dry particulate collection for industrial manufacturing processes
• Understanding of EPA emissions requirements is preferred.
• Experience working with materials used in corrosive and/or high temperature environments.
• Experience working with technical specifications is preferred.
• Understanding of the physics of gas flow is preferred.
• Knowledge of fans and process systems is preferred.
• Experience developing cost estimates and proposals for engineered equipment systems.
• Experience working with pollution control and product recovery equipment is preferred.
• Experience managing equipment design and supply projects is preferred.

JOB DESCRIPTION:

• Bachelor’s degree in Computer Science, Engineering or related technical field or equivale practical experience.
• Coding experience in one or more general purpose languages.
• Experience managing customer projects to completion, working with engineering teams,sales and partners.
• Experience architecting, developing, or maintaining secure Google Cloud solutions.
• Strong verbal and written communication skills (English and Mandarin Chinese), and the abili
• to develop high-quality technical documentation and presentation materials.
• At Least 7 years of security architecture and/or security engineering experience
• Hands on and deep knowledge of security principles.
• Demonstrated experience in Cloud Security delivered within the context of customer facing roles.
• Experience understanding attacks and mitigation methods, in two or more of the followin
• Network protocols and secure network design; Operating system internals and hardening;
• Web application security; Security assessments and penetration testing; Authentication and
• access control; Applied cryptography and security protocols; Security monitoring and
• intrusion detection, Incident response and forensics; Development of security tools,
• automation or frameworks.
• Strong practical experience securing Kubernetes and containerized workloads

The Commissioning Engineer will be responsible for planning, executing, and overseeing the commissioning processes for data center projects. This role involves coordinating with multiple stakeholders, including vendors, contractors, and the construction team, to ensure that all systems are tested, validated, and fully operational according to project specifications.

Key Duties & Responsibilities:

• Commissioning Plans: Develop commissioning sequences and plans according to project requirements.
• Scheduling: Create and analyze the testing and commissioning schedule, identifying the critical path.
• Equipment Testing: Coordinate on-site equipment testing with vendors, ensuring smooth setup.
• Activity Tracking: Monitor and track commissioning activities to maintain schedule adherence.
• Meetings: Lead weekly meetings with vendors, suppliers, and contractors to address progress and issues.
• Reporting: Issue weekly commissioning reports and maintain a tracker for script status.
• Issue Resolution: Log and resolve commissioning issues with vendors and contractors.
• FAT/SAT Leadership: Lead Factory and Site Acceptance Testing, ensuring successful outcomes.
• Documentation: Consolidate and validate daily testing reports.
• Logistics: Arrange equipment logistics for HLT and IST
• Project Close-Out: Resolve all commissioning issues and complete documentation for the OMM handover.

Job Requirements

1. Experience: At least 2 years of relevant experience in data center testing and commissioning.
2. Technical Knowledge: Knowledge of data center systems and equipment, including servers, storage, networking, power, cooling, fire protection, and security.
3. Skills: Strong communication, problem-solving, and analytical skills. Ability to work independently and as part of a team.
4. Willingness to Travel: Ability to travel for projects within Malaysia/Indonesia.

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Our client is serving the Oil & Gas and Marine Offshore industries’ companies. It is looking for a Piping Engineer.

Job Highlights:

• Permanent role| 5.5 days’ work week
• Location: Gul Circle| Company’s transport available.
• Competitive compensation benefits
• Good career advancement opportunities

Responsibilities:

· Study the project requirement, specification, scope of work and scope supply and other requirements stated

· Attend periodical meeting with client to discuss on the engineering clarification and •engineering status:

· Technical Query (TQR)

· Piping Insulation Document & Drawing Status (isometric drawings, P&ID’s, Piping GA’s, etc.)

-FIM & DM supply piping material status

-Engineering Clarification / Proposal

· Responsible for the master material take off (MTO), procurement of insulation materials and to expedite delivery for materials

· Take charge of master status of Engineering, Procurement and construction status

· Coordinate with fabricator and project team for the execution of insulation work

· Prepare necessary documents for additional claim/instruction to sub-contractor (JCS/JCR/Site Instruction/Timesheet “A” and “AA”).

· Resolve engineering matters as advised or instructed by the department head and engineer manager

· Establish sequence of priority for piping completion with other relevant departments

· Ensure work and materials are in accordance with sequence and stated quality standards and requirements

· Supervise fabrication and installation of piping items are in accordance with drawings and clients’ specifications

· Organize and control shop fabrication activities

Requirements:

· Diploma in Mechanical Engineering or equivalent

· Minimum 8 years of experience in marine/shipyard operations involving site piping fabrication and supervision works

· Highly motivated individuals with good organizational skills and leadership skills

· Able to adapt new work environment and able to lead independently

· Active and positive minded

· Proficient in MS Office applications | Familiar with Excel is very crucial for this role

For Engineering role candidate, he must be PC literate with good Microsoft Excel knowledge to follow up and close up Engineering Issue, Procurement Issue and Construction issue and Test Pack Preparation work.

(NB: No quotas for the foreigners. Singaporeans are welcome to apply.)

Job Related Information:

• Permanent| 5.5 days’ work week | Monday-Friday 8am-5pm, Saturday 8am-12pm
• Office’s Location: Gul Rd, Singapore.

Salary & Benefits:

• Monthly Basic Salary: Based on expertise, academic qualification and skills
• OT pay entitlement: OT Flat rate S$8/- per hour
• Healthcare benefits such as Outpatient, Dental, Health Screening etc.
• Cover with insurances, Personal Accident, Hospital & Surgical, Term Life and Work Injury policy
• Variable Bonuses
• 14 days Annual Leave and 14 days sick leave
• Birthday leave / Festival eve half day leave
• NTUC membership – Applicable for only Permanent confirmed staff
• Company transport provided at 5 pickup points:

Ø Bukit Batok MRT

Ø Jurong East MRT

Ø Boon Lay MRT

Ø Choa Chu Kang MRT (only Morning pickup)

Ø Woodland MRT (only Morning pickup)

NB: NO QUOTA FOR THE FOREIGNERS PLEASE.

• This job vacancy is posted on the My Career Future Jobs Bank portal, which is only for the Singaporeans and Singapore PRs.
• Please contact our Recruitment Manager: Leeza Shaheed (R1770675) for further enquiries about the role @ [email protected]/ [email protected] and send your updated CV in MSWORD with the following information: Nationality, Full name, Total yrs. of exp., relevant work exp. for how many yrs., expected monthly basic salary, latest drawn monthly basic salary, availability, reason for leaving last two jobs.

Venture Cove Pte. Ltd.

(EA License # 21C0547| UEN: 202103896W)

138 Robinson Road, Singapore 068906

Website: http://www.venture-cove.com/

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

• Experience in setting up automated systems.
• Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568