JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.
• 5.5 days work week

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company, and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

The Inside Sales Engineer work closely with External Sales members as one of the main contacts for customers regarding product and services inquiries. The role involves managing customer inquiries, preparing quotations, ensuring smooth coordination with other departments and maintaining strong customer relationships.

This role will be based in Singapore, is part of the Sales Department ( Internal Sales Team ) and reports to the Customer Experience Manager.

The main tasks and responsibilities are:

Collaborative Sales Approach

• Partner closely with all stakeholders to serve customers effectively and meet team sales targets.
• Respond promptly to customer inquiries via phone, email, or other communication channels.
• Build and maintain long-term relationships with customers.
• Promote Digital Sales business

Sales Support

• Coordinate with external sales teams to close sales opportunities.
• Prepare and follow up on quotations and proposals.
• Work with External Sales to ensure correct pricing, delivery timelines, and terms arrangement with customers.
• Verify customer Purchase Orders, convert quotations into sales orders, and process orders using the SAP system.
• Collaborate with the supply chain and operations teams to ensure timely delivery of products and services.
• Monitor and update customers on order status and delivery schedules.

Cross-Department Coordination

• Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations.

Basic Technical Support and Problem-Solving

• Understand and interpret technical requirements for products, projects and services.
• Liaise with Application Consultant teams to provide accurate solutions to customer enquiries and challenges.

Customer Service and Problem Resolution

• Deliver exceptional customer service, build strong relationships, resolve problems, and address complaints effectively.

Additional Responsibilities

• Perform any other tasks required by the Company to support its business strategy.

Requirements

· Diploma or Degree in any Engineering related discipline or equivalent

· Minimum 2 years’ experience as Inside Sales or Project Proposal

· Experience in Instrumentation and Automation/Control Engineering environments would be an advantage

· Relevant Technical knowledge (Would be an advantage)

· Enthusiastic, dynamic, and customer-oriented personality

· Systematic and meticulous

· Strong ability to work effectively within a team environment.

· Ability to handle multiple tasks simultaneously and prioritize effectively.

· Excellent communication skills, both written and verbal.

Project Description:

Our client is the corporate and investment banking arm of The Group, world’s 12th largest bank by total assets.
We work daily with international branches located in 30 markets by:
- Envisioning and preparing the Bank’s futures information systems
- Partnering and supporting core banking flagships and transverse areas in their large scale development projects.
- Providing premium In-house Banking applications,
This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.
We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

We are seeking a talented Software Engineer with a strong aptitude for programming to join our dynamic Capital Market Department!

In this role, you will contribute to projects and possesses capability to make breakthroughs in design, development, testing, debugging and implementing software applications or specialised utility programs in support of end users' needs on platforms.

Capital Markets IT involves technology solutions and systems used in financial markets for trading, investment, and related activities. This includes electronic trading platforms, risk management systems, market risk, counterparty risk, algorithmic trading, data analytics, and Regulatory measures. The use of advanced technologies like API’s, artificial intelligence and cloud solutions are also becoming increasingly prevalent in capital markets to enhance efficiency and decision-making processes.

The department is responsible for development and maintenance of Capital Market IT applications (in-house and package) used worldwide, covering Front Office (Murex, Apex, Orchestrade…), Back Office (Summit, Calypso…), Market data referential (Asset Control..), Market Risk (in-house application on big data technologies).

The Foreign Exchange (FX) IT division, works across the full value chain to sustain business activity and enable its acceleration.

This role aims to develop on the Calypso back office package, in project mode as well as maintenance, and to support the “run the bank” function. It requires a deep understanding of the nature of business operations, timing of activities & data flowing through internal and external systems. The build and support team continuously works with business users, infrastructure engineers and system managers.

Responsibilities:

• Research, design, and develop computer and network software or specialised utility programs. Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.
• Identify and resolve issues which have organisation wide and long-term impact. Identify security risks, creates requirements to capture security issues, and performs initial threat modelling to ensure coding standards meets security requirements
• Develop and maintain the software configuration management plan and oversees the building, verification and implementation of software releases. Provide guidance and technical support to the quality testing teams.
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Collaborate with cross functional teams (business analysts/ support teams… ) to ensure smooth integration of new features and updates and troubleshoot, debug, and resolve application-related issues
• Stay updated on industry trends, emerging technologies, and regulatory changes relevant to capital markets.
• Participate to proof of concept for new technology R&D
• Contribute to continuous improvement and automation by leverage your programming skills to create custom tools and scripts that automate repetitive tasks and reduce manual effort.
• Develop scripts and automation tools using Python, shell scripting, and other basic programming languages to streamline processes and improve efficiency
• Engage and support others in the team, readily put forth his ideas in a clear and compelling manner.
• The candidate should have analytical and problem solving skills, a pro-active mind-set in security, proven ability to work individually under pressure. Team player with good interpersonal skills. Very good communication skills and keen to work with business users.
• Collaborate with computer hardware engineers (CAGIP and ITS) to integrate infrastructure constraint (whether in-premise or cloud) hardware and software systems aligned with capacity, develop specifications and performance requirements.
• Build management:
- Develop in JAVA for Calypso v14.4 package.
- Develop internal components.
• Incidents and Requests management (business users and other IT teams)
- Communicate effectively.
- Analyse enhancement requests and bug-fixes.
- Document deliveries.
• Change Management
- Apply monthly release strategy, following the team’s milestones for analysis, coding and testing.
- Support the release roadmap in production.
- Operations management
- Application support, level 3 (expert).
- Troubleshoot and fix issues.
• Continuous improvement
- Process improvements.
- Coach more junior team members as required.
• Research, design, and develop software.
• Analyse user needs and develop software solutions
• Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.
• Work with other engineers to integrate hardware and/or software systems
• Develop specifications and performance requirements

Mandatory Skills Description:

• 7+ years of relevant working experience
• Experience in supporting capital market applications and trading systems, ideally within the dynamic landscape of Market Risk/Front Office operations with a commendable grasp of financial products (Treasury, FX, Credit, IRD, Bonds, RSF etc.)
• Expertise in Calypso Back office functionality with hands-on experience in customizations of different Calypso modules:
- Custom Remote Services
- Engines
- Events
- Filters
- Reporting Framework
- ScheduledTask
- Message / Swift messages
- Transfers
- Settlement Delivery Instructions
- Accounting
- Pricers
- Workflows
- Reconciliation functionalities
• In depth knowledge of Confirmations, Settlement, Position and Accounting modules.
• Understanding of financial assets (FX, Treasury products, repos, bonds, SLB, issuances) and trade lifecycle.
• Experience with regulatory reporting HRF, NORIA, MMSR.

• Excellent communication and interpersonal skills to effectively collaborate with diverse teams.
• Excellent problem-solving and analytical skills.
• Ability to work under pressure.
• Appetite to follow technology trend and participate to communities.
• Eagerness to learn and adapt to new technologies.
• Strong perseverance and diligence towards attaining goals and effective time management
• Passion for sharing expertise and grow team members’ skills.
• Autonomous, self-motivated and excellent team player

Nice-to-Have Skills Description:

• Domain-Driven design and Microservices: springboot
• Exposure to Capital Markets applications
• Hands-on experience in implementation projects.

• Provide pre-sales and after-sales support to all HVAC/ACMV projects.
• Manage the Service Team in executing project plans, timelines, cost preparations and resources requirement.
• Provide technical support and clarifications to the Customer Service in producing comprehensive quotations to the clients.
• Address and resolve project administrative issues that may arise during project execution.
• Liaise with vendors and suppliers to prepare necessary equipment required for the project.
• Actively follow-up and resolve customer service-related issues / concerns.
• Attend internal and external meetings with stakeholders to resolve service operational matters.
• Oversee project execution and ensure service completion are within schedule.
• Ensure off-site operations are scheduled in accordance with customers' requirements.
• Ensure customers' requirements are clearly coordinated and communicated with the Service Team.
• Conduct site survey to accurately plan and allocate manpower resources for all Service jobs.
• Ensure Service projects are in compliance with all internal and project site SQE rules & regulations.

Responsibilities

• Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)
• Verify Logic at ISP level and Digital System level
• Optimize Design for less gate count and low power consumption
• Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

• Minimum MSEE, or BSEE, or related/equivalent discipline
• Experience / knowledge in RTL, C/C++ programming and verification
• Strong debugging and problem-solving skills
• Good communication and interpersonal skills
• Result oriented and embrace change behaviours
• C++/SystemC knowledge with High Level Synthesis experience is a plus.
• Experience / knowledge in CMOS Image Sensor is a plus

Job description

• Prepare drawings for the production line & provide design information to customers upon their requests.
• Follow up on customers’ requests & requirements. Provide on-site & off-site service to customers.
• To pick up any orders for fabrication or modification from customers.
• To abide by all contractual assignments and rules and regulations in any OEM maker contract.
• Require traveling or attached to overseas assignment and will be subjected to overseas allowance.
• To follow all duties and responsibilities assigned by the management or superiors.

Requirements

• Degree / Diploma in Mechanical Engineering or equivalent
• Proficient in CAD software, preferably in AutoCad & SolidWorks
• Preferably with knowledge in Jigs & Fixtures design
• Preferably with experience in the Semiconductor industry
• 3-5 years of relevant experience

Job Description

• Develop detailed designs, layouts, and specifications for piping systems, ensure proper pipe support design based on piping loads, thermal expansion, and seismic considerations.
• Identify appropriate materials, ensure material compliance with project specifications, applicable codes, and standards such as ASME, ANSI, and local regulations.
• Work closely with process, mechanical, civil, and electrical teams to ensure piping systems are integrated seamlessly with other systems
• Coordinate with procurement, construction, and commissioning teams to ensure timely delivery and installation of piping systems
• Prepare piping-related project deliverables including technical drawings, specifications, data sheets, and material take-offs
• Liaise with suppliers for quotation and technical evaluation of quotation. Review and approve piping construction drawings, isometrics, and support drawings
• Lead piping design reviews, coordination meetings, and vendor technical discussions
• Manage piping engineering scope, schedule, and budget, ensuring project milestones are met

Requirements

• Degree in Mechanical / Piping Engineering
• For degree holder, minimum 5 years of experience in piping design and engineering. For Diploma holder, minimum 8 years of experience is required.
• For senior position, candidate must have at least 10 years of experience, including leadership or project management experience.
• Strong expertise in piping materials, piping arrangement, stress analysis, and design of piping systems
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Knowledge of international and local standards (e.g., ASME, ANSI, BS EN, PUB Singapore guidelines)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping engineering software, and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development servicesProviding customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and productsThrough intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutionsComprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com

RESPONSIBILITIES

• Leads multiple project teams of other software engineers and firmware engineers, including internal and outsourced development partners responsible for all stages of design and development for complex products and platforms from NPI through Sustaining.
• Manages and expands relationships with internal and outsourced development partners on Software applications, firmware design, and development.
• Provides domain-specific expertise, overall software and firmware leadership, and perspective to cross-organization projects, programs, and activities.
• Specifies and documents workflows, engagement models, and objectives in partnership with other WW Software and Firmware teams.
• Collaborates with hardware engineers to ensure proper integration and communication between hardware and firmware components.
• Mentor less-experienced software and firmware engineers and help guide them to successful deliverables.
• Communicate program progress, escalations, and issue analysis to key stakeholders and executives.
• Identify areas of improvement in executing defined solutions and define path-forward actions.
• Communicate program progress, escalations, and issue analysis to key stakeholders and executives.

• Bachelor's degree/Master's in Computer Science, Computer Engineering, Software Engineering, Information Systems, Electrical Engineering, or equivalent.
• Minimum 5 years of experience in Embedded Systems/Firmware Development or relevant industries.
• Experience with multiple software/firmware design tools and languages, such as C, C++, Java/Javascript/Python, etc.
• Evaluating forms and processes for software/firmware testing and methodology, including writing and execution of test plans, debugging, and testing scripts and tools.
• Experience in CI/CD and Agile or other equivalent modern development methods.
• Experience in overall architecture of software/firmware and interaction with hardware/software/OS designs for products and solutions.
• Excellent analytical, problem-solving, and communication skills.
• Ability to effectively communicate program plans, proposals, and results, and negotiate options at senior management levels.

The Senior Service Engineer is responsible for providing technical expertise and support at customer sites. This role involves installing, maintaining, troubleshooting, and repairing equipment and systems to ensure optimal performance and customer satisfaction. This role is also a Team Lead for specific Service Team.

Key Responsibilities:

Installation & Commissioning

· Perform installation, setup, and commissioning of maritime equipment and systems onboard vessels or at customer facilities.

· Conduct functional testing and calibration to ensure systems meet operational requirements.

Maintenance & Troubleshooting

· Diagnose and resolve technical issues on mechanical, electrical, and control systems.

· Conduct scheduled and preventive maintenance to minimize equipment downtime.

· Prepare detailed service reports and recommend corrective actions.

Customer Support

· Provide technical advice and training to customers to ensure proper system operation.

· Act as the primary point of contact for technical support during and after project completion.

Compliance & Documentation

· Ensure all work complies with industry standards, safety regulations, and company policies.

· Maintain accurate service records, inspection reports, and parts inventory.

Collaboration

· Liaise with internal teams (sales, engineering, and procurement) to ensure seamless service delivery.

· Provide feedback to improve product design, reliability, and customer experience.

Leadership

· Leading and guide team members

We are a Singaporean SME located in Jurong area, manufacturer and agent for Weighing and Weighing Related Equipment, Electronic Measurement & Control Devices, Powder Processing Equipment and Systems, and Packaging Equipment. The foundation of our continued success over the past 69 years is a dedicated and professional team that strives relentlessly to overcome all challenges.

We are looking for suitable and qualified professionals to join us and contribute to our dynamic organization.

You will be part of the Engineering team to provide service to both local and overseas customer, which will involve maintenance and servicing of process equipment, installation, testing and commissioning.

THE ROLE: __________________________________________________________

* Conduct all aspects of service activities; include attendance to technical meeting and discussion with client, and overseas travel to support our regional market.

* Comprehend Electrical/ Mechanical/ Process and Instrument design and shop drawings.

* Working closely with Sales and Project teams in projects execution, plants and equipment installation, testing, commissioning, training, repairing and servicing.

* Candidate with prior experiences will have the opportunity to design and build customized solutions for client.

* Identify variation works and submit accurate cost implication

* Schedule, supervise and control sub-contractors to carry out their works accurately and timely in accordance to the contract drawings, specifications and approved QA/QC checklists

THE PERSON: ________________________________________________________

* At least Diploma in Mechanical / Mechatronics Engineering or its equivalent

* Working experience in related field of Solids Bulk Handling, Powder Processing Machineries, Bulk Packaging Machines.

* Fresh graduates are welcome to apply.

* Possess good communication and facilitation skills, and the use of Microsoft Project, ACAD, Solidworks

* Valid Class 3 driving license in Singapore as added advantage

* Hands-on, practical and independent person who is able to travel

Department: R&D

Report to: R&D Director

Xnergy is a multi-VC funded and Sovereign-backed power solutions Pre-IPO company，the first in the world in high power universal contactless charging for global electrified mobility. Xnergy was voted a APAC 25 company in 2020 by Cleantech Group.

* The APAC 25 is an annual list of private sustainable innovation companies that have gained the attention of market experts. The 25 companies are regarded as having the potential to make a significant impact in a five-to-ten-year time frame.

Xnergy has a subsidiary company in Suzhou and an office in Boston. For more information, please visit Xnergy website: www.xnergytech.com.

This role is based in Singapore and responsible for assisting R&D team on all Electrical and Electronics/Power Electronics concepts, design and fabrication for high power (3 kW and beyond) new contactless charger products.

Essential Functions/Responsibilities

1. Assist on design and implement power/control circuit for power converters, conduct design.
2. validation tests and work cross-functionally with other development groups.
3. Work closely with R&D Team, mechanical, field applications, and production teams for specifications, design, prototyping, and fabrication.
4. Plan and schedule to meet goals, deliverables and deadlines.

Education and Experience

1. Bachelor’s/Master’s/PhD degree in Electrical/Electronic/Power Electronics Engineering.
2. Possess 1 to 2 years of relevant work experience. Candidates with more than 2 years of experience can consider for senior role.
3. Basic knowledge in power electronics and power converters design, e.g., AC/DC, PFC, DC/DC, DC/AC, LLC and resonant converter.
4. Good fundamentals in circuit design, circuit analysis and simulations, analog electronics and synthesis skills.
5. Basic understanding of the characteristics of power semiconductors/passives components.
6. Experience with wideband gap device, e.g., SiC and GaN is preferred.
7. Practical and hands-on experience in PCB/PCA development (preferable Altium Designer), schematics design, PCB layout, library environment and PCBA production for product.
8. Good interpersonal skills to enable global, cross-cultural, and cross-functional engagements.
9. Able to work in start-up environment.

About Mun Siong Engineering Limited

One of Singapore’s leading integrated service providers since 1969, Mun Siong Engineering Limited offers a range of mechanical and electrical & instrumentation services for oil & gas, petrochemical, energy, chemicals, and power industries. As a one-stop solution provider, the Mun Siong Group caters for engineering, procurement, fabrication, construction, maintenance of plants and equipment, and specialised products and service solutions.

Job Description

Electrical Instrument Engineers are responsible for designing, configuring, and overseeing automated systems and power distribution projects, focusing on enhancing productivity, reliability, safety, and optimization in industrial facilities, from warehouses to complex EPC contracts, while managing contractors and ensuring system stability.

Responsibilities

• Serve as a knowledge resource for instrumentation, control systems, and process automation.
• Develop and maintain project documentation, including P&IDs, Instrument Index, and I/O Lists, across all project phases.
• Prepare and review engineering calculations, specifications, and requisition packages for inquiry and purchase, ensuring compliance with client standards and project requirements.
• Provide technical direction for material selection, vendor compliance, and equipment specifications; perform technical bid evaluations and make purchase recommendations.
• Coordinate with process engineers, mechanical equipment vendors, and external workshare offices to ensure compliance with project requirements and schedules.
• Plan, design, and oversee the construction, installation, and maintenance of electrical and instrumentation systems, ensuring compliance with codes, standards, and safety requirements.
• Prepare technical and construction scope of work documents for instrumentation, control systems, and electrical systems.
• Conduct inspections, testing, and vendor data reviews to ensure specifications and operational standards are met.
• Utilize computer-assisted engineering and design software to perform tasks and develop deliverables.
• Develop TIC cost estimates, effort-hour estimates, and budgets for labor, materials, and construction costs.
• Oversee project execution, ensuring timely completion within budget while maintaining quality and safety standards.
• Investigate customer complaints and recommend corrective measures; conduct field surveys to identify and resolve system issues.
• Supervise and train project team members as necessary.
• Prepare technical reports, system studies, and budgets for new projects, capital programs, and major repairs

Requirements & Professional Skills

• Diploma/Degree in Electrical Engineering
• Able to read and understand circuit diagrams as well as to detect discrepancies for combined services
• Well-versed in all local and international codes and standards on the related field
• Good knowledge in building M&E services, with project site experience in fire protection and electrical systems for M&E specifications, installation and maintenance.
• Positive attitudes/Drive for result.
• Mature personality and able to work independently.
• Good interpersonal, management and decision-making skills.

Job Description

• Coordinated with client, engineers, technicians and provided necessary support for process and Safety groups
• Electrical and instrumentation installation work, wiring and terminations.
• Preparation of Electrical and instrument QA/QC documents.
• Performing loop check, safety interlock functioning test.
• Performing the site testing and commissioning of field Instruments.
• Perform Instrument construction, testing, commissioning work. Preparation of punch list and ensure all the punch list items are rectified before client Final Acceptance.
• Preparation of Electrical & Instrument Index, Instrument IO lists, Instruments datasheets/specifications against the P&ID for the proper construction activities.
• Attend emergency site issues and response to site within service level of agreement

Requirements:

• Diploma/Degree in Electrical/Electronic Engineering
• Relevant experience in Pharma, oil & Gas industry of at least 4-8 year.
• Possess basic safety & health experience and computer skills
• Resourceful, earnest, good team player, meticulous and responsible
• Self-motivated,able to multitask
• Good communication and interpersonal skills, ability to liaise with all levels of people
• Good knowledge of local industry
• Good fundamentals of electrical safety and area classifications.
• Good knowledge of Ingress Protection and explosion prof equipment.

♦ Close supervision, Management and execution of construction works at site, including monitoring work progress and quality

♦ Manage, vendors, contractors and Sub Con for progression of work

♦ Responsible for all the site implementation and completion towards management target, client’s expectation and compliance to authorities' regulations.

♦ Responsible for the project quality and safety plan.

♦ Liaise with consultant and contractor for Green Mark certification processes

♦ Ensure company ISO and OHSAS requirements are fully implemented on project.

♦ Coordinating with authorities, clients, consultants and subcontractors on all project aspects.

♦ Work closely with Engineering team on any technical issues arising from site and lead the supervision and resolution of work onsite

♦ Ensure proper documentation and records of site works are carried out

1，Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Environmental/Health/Safety) or equivalent.

2. At least 3 year relevant experience construction.

3，Required skill(s): MS Office, AutoCad.

4，Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.,

5，Independent, proactive positive work attitude

*We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

• Attend to Client’s site surveys, meetings and maintain constant contact/communication regarding project works (In progress and new)
• Work closely with the drafting department to come out with preliminary design (for client’s approval), material take off and cost estimation for the new potential projects
• Carry out cost estimation and prepare quotation for clients
• Procurement of materials and consumables required to carry out the fabrication work
• Work closely with clients during project execution with regards to schedule, determination of hold points (for testing and inspection) and project close up
• Overall in charge of project’s delivery schedule, cost control, quality and safety (i.e. ensure that projects are carried out within budget, schedule and with zero rework and safety incident)
• Carry out daily meeting with the supervisors to plan, prioritize, review and update status of projects
• Prepare Risk Assessment for Clients review and approval prior to work start
• Update project status during the project weekly meeting
• Check and ensure proper documentation (such as test packages, as-built drawings etc) are in place prior to project close up
• Ensure D.Os, Job Completion forms and invoices are in place (signed, submitted and filed promptly) within 1 week of project close up
• Maintain accountability to the individual client site based on sales records, quality control and safety records
• Ensure overall safety well being of workers in the workshop as well as the on site during project execution
• Carry out at least one Monthly safety Audit using the Audit Checklist
• Attend and participate all Safety Meetings organized by Clients

Education & Work experience Requirements:

1. At least Bachelor's degree in Automation, Control Engineering, Internet of Things (IoT), or related fields.

2. At least 3 years of relevant work experience in the structural steel industry.

Job Description:

1. Develop and optimize automation solutions based on production requirements, and coordinate with teams to deploy automated inventory management systems.

2. Design and improve automated steel structure production processes, integrating industry-standard software (e.g., Tekla) with processing equipment to achieve automated cutting, assembly, and welding.

3. Maintain existing production lines and propose improvements to minimize manual intervention and increase efficiency.

4. Collaborate with teams to ensure seamless integration of automated systems with existing production management systems, and provide training and guidance on new equipment and systems.

5. Generating reports outlining new automation ideas, machine and software upkeep best practices, test results.

Key Skill & Competency Requirements:

1. Proficiency in sensor principles and applications, with the ability to design and optimize sensor-based monitoring and control systems.

2. Proficiency in embedded systems design, including embedded hardware development, microcontroller programming (e.g., ARM, STM32), and real-time operating systems (RTOS).

3. Familiar with C# programming.

4. Familiar with mainstream automation development tools and software, such as LabVIEW, MATLAB/Simulink, Siemens TIA Portal, and AVEVA System Platform.

5. Familiar with industrial automation technologies, including PLC programming, servo control, and industrial robotics.

6. Familiar with smart manufacturing technologies (e.g., Industry 4.0, MES systems, IoT devices) and their applications in steel structure manufacturing.

• Research, design, and develop new circuits, technology, modules, and devices
• Strategise on architectural and electronic designs, product pipelines, and new potential technology and devices
• Identify, analyse, recommend, and develop next-generation improvements for existing circuits, technology, modules, and devices
• Conduct evaluations and recommend modifications on existing designs and prototypes based on performance in quality test and customer feedback
• Ensure reliable and consistent performance and function of existing designs for circuits, technology, modules, and devices in operating environments
• Perform circuit analysis, run simulations, create schematic drawing and PCB layouts, and produce wiring programs using respective softwares
• Design, develop, and execute testing and investigation methods / procedures for circuits, technology, modules, and devices with the use of Automated Test Equipment (ATE)
• Prepare engineering sketches and specifications, design and test documentation, product specification or Bill of Materials (BOM), and product development timeline
• Coordinate with relevant teams to ensure design manufacturability and testability
• Keep updated on technology and regulation development

Requirements:

• Good understanding of electrical engineering codes, electronic systems, component materials and safety standards
• Possess hands-on experience using design and calculation software
• Strong analytical, problem solving and conceptualisation ability
• Strong interest in technology
• Ability to think outside the box and manage complexity
• Strong team player and customer-oriented with strong interpersonal and communications skills
• Proactive, enthusiastic with “can do” attitude
• Meticulous, self-reliant and strong sense of urgency
• Committed, motivated and able to handle multiple tasks simultaneously

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities

• Developing and designing network architecture and computer systems infrastructure.
• Overseeing the development, installation, and administration of computer systems.
• Monitoring computer systems and networks for viruses, malfunctions, and errors.
• Analyzing network data and infrastructure to determine inefficiencies and problems.
• Plan, design and manage AWS cloud implementations.
• Evaluate cyber security posture and recommend improvement.

Job Requirements

• Bachelor’s degree in Computer Science / Information Technology / or similar field.
• Solid working knowledge of networking (e.g. CCNA), Windows Domain, Office 365 administration, AWS cloud technologies and network security.
• At least 3 years of systems and network engineering related experience.
• Good communication skills in English.
• Good communication skills in Korean will be an added advantage

Career Highlights:

• Good career advancement opportunity
• Competitive compensation benefits
• Company’s transport available.

Job Responsibilities:

• Prepare and conduct Project Specific Quality requirements training to production Supervisors and sub-contractors QC Personnel.
• Establishing Work Procedures and Instructions.
• Act as Project Lead QA/QC and control the entire project Quality Assurance and Control activities during construction phase.
• Oversees the Inspector’s performance on the project towards monitoring and control of workmanship towards quality.
• Updating of inspection status and records on daily basis.
• Attend weekly client progress review, Internal and Sub-Contractors meeting to discuss Quality issues.
• Liaise with client in relation to Quality on Project Specific.
• Schedule and conduct Project Specific Quality Audit as per agreed Plan.
• Monitor the compiling of Piping Test Packages.
• Monitor administration and submission of ITRs for Project.
• Prepare and maintain Weekly Weld Rejection Rate Summary.
• Monitor the issue and close-out of NCR’s for the project and maintain its register.
• Monitor progressive compilation of the MDR for the project as work progress.

Job Requirements:

• Degree/Diploma in Mechanical Engineering.
• Min 6 years QA/QC experience in Marine shipyard
• Mandatory of Welding Inspectors certifications (AWS or CSWIP).
• With Lead Auditor certificate is preferred
• Experience with TOPside piping fabrication or TOPside module fabrication, welding inspections of structural, welding jobs including Non-Destructive testing.
• Experience in piping line walk, reinstatement inspections by clear understanding of Isometric drawings.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description:

• Day-to-day customer service and procurement activities - Responsible for managing daily customer service operations and manage entire supply chain process from procurement to distribution to ensure timely and cost-effective delivery of products.
• Demand planning - Work closely with sales and marketing teams to forecast demand accurately.
• Production Planning - Collaborate with Operations team to develop production schedules and optimize the production planning that align with demand forecasts.
• Inventory Management - Work within the team to implement robust inventory control measures to maintain optimal stock levels. Monitor and analyze inventory turnover, taking proactive measures to prevent shortages or overstock situations.
• Logistics Coordination - Coordinate logistics activities, including transportation, shipping, and customs clearance. Optimize transportation routes and methods to reduce costs and enhance efficiency.
• Relationship Management - Build and maintain strong relationships with local and overseas suppliers and customers. Develop good vendor management with warehouse personnel for effective inventory control.
• Licensing - Manage all license requirements for Import/Export & transportation with compliance to Government Authority of Singapore.
• Collaboration and Communication - Work with product management team to review product specification/technical data. Collaborate with quality control teams to ensure that all products meet industry standards and customer specifications.
• Perform any other ad hoc tasks assigned by Team leader / Management.

Job Requirements:

• Degree in Chemistry / Chemical Engineering or any Engineering field.
• Minimum of 2 Years of working experience in a related field.
• Preferably with related experience in Chemical Distribution/ Semiconductor industries.
• Excellent written and spoken communication skills in English and ideally proficient in Chinese (in order to negotiate and handle queries with overseas Mandarin speaking suppliers/vendors in regards with the import & export shipment arrangement matters).
• Hands on experience using SAP/Navision system, strong in Microsoft Office, especially Excel would be an advantage.
• Experience in ISO9001, ISO14001 and ISO 45001.
• Ability to prioritize workload, make systematic decisions under pressure.
• Possess an entrepreneurial ‘can do’ mindset, able to work in a start-up environment.
• Possess excellent interpersonal skills, strong problem-solving skills and sense of ownership.
• Willing to travel if required.

A Day in Your Life at MKS:

As an Application Engineer , you will partner with Sales and Customers to support FEC process activities and improvement.

You Will Make an Impact By:

• Perform characterization study on new products and document the results in customer presentations for marketing purposes
• Presentation of products capability and performance to management and customers
• Provide on-site new process installations (Beta Site Evaluation) at customers for new products de-veloped
• Provide training to customers and applicators
• Support Functional Electronic Coatings (FEC) business in the Far East by processing samples for customers, evaluations/qualifications and conducting lab scale experiments to troubleshoot cus-tomer problems
• Responsible to ensure the FEC Laboratory cleanliness and maintenance through practicing good housekeeping methods.
• Ensure work time is recorded and uploaded into the SAP platform for all projects completed and in-hand.
• Health, Safety & Environment (HSE) Responsibilities: Safety remains our number 1 priority. Making HSE as an integral part of all activities. The successful candidate must agree to comply with our in-ternal HSE & QS policy and other relevant local regulations.
• Other jobs / tasks assigned by the Application Manager and Business Manager
• Travel Requirements : 30% of travel is required

Skills You Bring:

• Degree in Chemistry or equivalent. Masters or PHD in chemistry can be considered.
• Minimum of 3 years working experience in the related function /industry.
• Good knowledge of electrochemistry and surface finishing technology
• Good command in English.
• Good communication and interpersonal skills.
• Candidate should be proactive, highly motivated, goal-oriented and customer-oriented person
• Good communication skills, resilience, good reporting
• Excellent analytical thinking, able to work under minimum supervision and independently, at the same time a highly committed team player.