Job Title for Posting

Assistant Laser Ablation Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 8.30am - 5.30pm / 2:30pm - 11:30pm / 9:00pm - 6.00am.
• Prepares substrates/precursors, loads samples, in charge of laser ablation process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

We are looking for an experienced IT software engineer to join our dynamic team!

Key responsibilities:

· Report to the IT Manager

· Design, implement, and maintain software applications.

· Monitor IT applications to proactively identify and resolve reported issues.

· Maintain accurate and up-to-date documentation for processes, procedures, and project updates.

· Understands UI, cross-browser compatibility, and general web functions and standards.

· Executes assignments with the use of web applications, scripts, and programming languages such as HTML, CSS, JavaScript, and APIs.

· Develops and validates test routines to ensure the quality of the external and internal interface.

· Plans and delivers software platforms and products across multiple organizational units.

· Designs assignments with web services like REST, SOAP, etc.

· Evaluates written code to ensure it meets industry standards and is compatible with all devices.

· Maintains a professional understanding of web development by tracking trends and participating in study groups.

· Handle ad-hoc tasks and projects as assigned, adapting to changing priorities.

The successful candidate should have:

• BA in Computer Science, Computer Engineering, Information Technology, Information Systems, Software Engineering, or related areas
• Min 3 Years of experience
• Proficiency in C# and/or JS programming languages.
• Proficiency in ASP.NET, .NET Framework, .NETCore, HTML, CSS, JavaScript, NodeJS, NextJS.
• Proficiency in Microsoft SQL Server and/or PostgreSQL.

Working location:

511 Kampong Bahru Road, #04-07, Keppel Distripark, Singapore 099447.

Working hours:

Mondays to Fridays

8:30am to 6:15pm

Whatsapp your resume to 87612258 to APPLY or ENQUIRE TODAY!

1.1. Broad Functions:

As part of the technical services team, the Chemist is responsible for managing and control of the lab polymerization facilities. They need to design, optimizing for creating polymer materials and support the production processes such as scale up, trouble shooting and improvement.

1.2. Job Description / Responsibilities:

1.2.1. Development

1.2.1.1. Design and synthesize new polymers with desired properties for various applications.
1.2.1.2. Conduct experiments to understand the relationship between polymer structure and its physical and chemical characteristics.
1.2.1.3. Analyse and interpret data from various techniques like spectroscopy, chromatography, and thermal analysis to characterize polymers.

1.2.2. Polymer Production and Processing

1.2.2.1. Develop and optimize production processes with productivity and cost effectiveness.
1.2.2.2. Troubleshooting issues arising during mass production and suggest solutions.
1.2.2.3. Collaborate with related department to ensure smooth integration of new polymers into existing production lines.

1.2.3. Material Characterization and Testing

1.2.3.1. Perform various tests to evaluate the mechanical, thermal, electrical, and other properties of polymers.
1.2.3.2. From the test results to make a judgement the suitability of polymers for specific application.
1.2.3.3. Proceed with modification to polymer formulation based on performance needs.

1.2.4. Communication and collaboration

1.2.4.1. Document research findings and experimental procedures in clear and concise report.
1.2.4.2. Present research results to colleagues, management, or external audiences.
1.2.4.3. Collaborate effectively with related parties to achieve project goals and to resolve issues.
1.2.4.4. Support training new products/process modification for related parties.
1.2.4.5. Train basic knowledge in lab for new staff

1.2.5. Laboratory Management

1.2.5.1. Safe operation and up-keep 5S of laboratory.
1.2.5.2. Training of new lab staff.
1.2.5.3. Lab work planning and scheduling.
1.2.5.4. Equipment & spare parts management.
1.2.5.5. Maintain chemical inventory.

1.2.6. Others

1.2.6.1. Perform any other tasks assigned by the manager

1.3. Requirements:

1.3.1. Degree in chemical engineering, Polymer synthesis chemistry, or equivalent.
1.3.2. Fresh graduate - Junior Chemist
1.3.3. At least 3 years of relevant working experience – Chemist
1.3.4. Understand the hazardous of materials from SDS + Singapore regulation and judge an appropriate instruct.
1.3.5. Basic knowledge and practical experience for chemical experiments.
1.3.6. In depth knowledge of polymerization mechanism and kinetics.
1.3.7. Expertise in polymer characterization evaluation techniques.
1.3.8. Operate spectroscopy, chromatography and thermal analysis.
1.3.9. Ability to interpret and analyse data.
1.3.10. Excellent written and verbal communication skills.
1.3.11. Ability to collaborate effectively with colleagues.
1.3.12. Understanding of relevant safety regulations and best practices.
1.3.13. Project management skills.
1.3.14. Intermediate MS Office skills
1.3.15. Self-disciplined as a role model for employees.
1.3.16. Meticulous in handling complex work.
1.3.17. A resourceful problem solver.
1.3.18. A person with high degree of integrity and patient.
1.3.19. Understand the Japanese culture to support working with Japanese colleagues. (Preferred)

1.4. Others:

1.4.1. Location: Jurong Island (Company Transport provided)
1.4.2. Commence work: ASAP.
1.4.3. Applicants can work in Singapore without requiring a work pass.
1.4.4. Working Hours: Mon ~ Fri from 8:00 am - 4:45 pm

Job Description:

• Monitoring the entire production line with quality issues.
• Work with internal teams to improve the quality of the products
• Familiar with various inspection techniques and able to act as an auditor for quality system

Requirements:

• Require to travel to our malaysia's plant
• Minimum 1 year working experience in manufacturing field
• Previous work experience as a QA Engineer or any similar role
• Minimum Diploma/ Post-secondary/ Polytechnic in engineering or equivalent

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

• Meet Ship Superintend at ongoing vessel at Anchorage or PSA, inspect
• refrigeration, accommodation air-conditioner systems, package type air-
• conditioner, split type air-conditioners.
• Repair the equipment as per customer’s requirement or services or retrofit,upgrade the entire system.
• Supply brand new refrigeration and air-conditioning compressor or re-
• conditioned compressors as per buyer requirement.
• Supply, install package type air-conditioners, split type air-conditioners.
• Supply refrigeration & accommodation air-conditioner compressor parts,
• lubrication oil and refrigerant.

• Programming, testing, commissioning, and handover of Electrical Systems (22KV Switch gears & transformers, protection relays, and hipot)
  Prepare and maintain all required commissioning documentation which includes client submission.
• Supervision and Monitoring of defined test procedures start-up sequences, reliability test runs, and performance tests.
• Monitoring of functional and operational tests of various equipment in order to prepare the equipment for the first start-up.
• Manage and supervise a team of experienced commissioning technicians to execute Live equipment testing in a highly professional and safe manner
  Ensure QAQC integration within commissioning processes and procedures
  Witness and provide contractor resources to support FAT as required.
• Preparation of inspection reports, certificates, progress reports, and site correspondence.
• Liaise closely with the client QAQC/Testing teams.
• Generating MSCR's (Maintenance System Change Request) at the project handover stage.
• Ensure that commissioning acceptance criteria is aligned with design specification and client requirements.
• Any other duties required by the Commissioning Manager.

Job Descriptions:

• Valve remote control and tank gauging system

• Hydraulic deck machinery testing/ commissioning/ service

• Installation, maintenance and upgrade these systems and related equipment , including inspection, testing and repair

• Carryout testing and inspections by company policies and procedures

• Must have relevant experience in Electrical/ Instrumentation/ Hydraulic fields

• Able to read and understand the electrical drawings and P&ID/ hydraulic circuits

• Need to work onboard the ship (shipyard, anchorage, offshore) if necessary

• Travel to overseas for service job when necessary

• Preferred background knowledges:

• Hydraulic/ Pneumatic/ Electric Actuator functions/ principles

• Hydraulic Power Units functions/ Trouble Shooting/ Service

• Electrical Motor Stater panel troubleshoot, solenoid control, instrumentation, Automation control troubleshoot

• Basic knowledge for the PLC Programming upload/ download/ Scada/ HMI

Requirements:

• Minimum Diploma/ Degree in Electrical/ Mechanical Engineer

• Minimum 3 years of relevant working especially in Marine/ Offshore/ Instrumentation & Control/ Hydraulic

• A self-starter

• Comfortable working independently and working with team members

• Innovative thinking, thinking outside-the-box, resourceful problem solver

• Excellent communication and interpersonal skills

Job Benefits

Excellent learning environment

Positive and closely knitted working environment

Working location:

15 Kwong Min Road

Singapore 628718

Shortlisted candidate will be notified

Job Summary

The Sales Engineer will be based in Singapore and is accountable to generate profitable sales revenue and increase operating income by broadening sales coverage, establishing new accounts, and providing total solutions for compressed air to customers in Singapore.

Responsibilities

• Identify and source new clients and business prospects (e.g., perform outreach to cold leads via calls and emails).
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with customers (incl. customer visits) to solicit for orders.
• Negotiate tender, contract terms and condition and prepare Sales contract.
• Prepare sales report, analysing cost and sales, quotations and maintaining and creating new client accounts.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Degree / Diploma in Mechanical Engineering or related fields.
• Sales experience with industrial products such as Air Compressors, Dryers, or other similar industrial equipment.

Travel & Work Arrangements/Requirements

Office-based, will be required to travel within Singapore to meet clients or overseas for business needs.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Commissions
• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Annual, Sick, Hospitalisation, Marriage, Exam, Compassionate, Maternity, Volunteerism Leaves.

Do you want to be part of the team that revolutionizes the resource exploration and navigation industry? Atomionics is working on quantum sensors based on cold atom interferometry where atoms are cooled down to almost absolute zero using lasers. At such cold temperatures, these atoms start behaving like waves, which allows us to precisely measure the forces acting on them.

This opens up a wide range of applications including, but not limited to, paving a path in the energy transition to zero-carbon, exponentially improving the performance of inertial navigation systems, and transforming the global positioning system. At Atomionics, you will get the chance to prototype, test, refine, finalize, and produce your designs toward making our devices compact and robust for field deployment with the only constraints being power and your imagination.

We are looking for an electronics engineer who:

1. Wants the freedom to innovate by being involved in deep tech research
2. Is excited by the prospect of working within an interdisciplinary team comprised of mechanical engineers, physicists, and software engineers
3. Would like to own their work via compelling equity offerings

We are a small, focused group in a high-energy environment. Our team consists of people at the top of their domains with a diverse set of experience, such as in advanced rocket engines, the first digital cameras, and high-resolution microscopes, apart from cold atom physics. In addition, we are backed by some fantastic investors from the private and public sectors, such as Wavemaker, SGInnovate, Cap Vista, 500 Startups, and other prominent angels.

Responsibilities

• Lead project development from hardware specifications, manufacturing methods and procedures, and manufacturing quality
• Design architecture to manage size, weight, and power of cold atom sensors to target specifications
• Propose new innovative solutions and technology

Must have skills

• Analog and digital design
• Microcontroller/microprocessor and FPGA based design, interface SPI, I2C, RS232, Parallel, USB, CAN, and SATA
• Schematic capture and PCB design layout
• Prototyping and debugging of boards
• Strong interest in and passion for technology

Nice to have skills

• Knowledgeable in RF test methodologies of RF modules and the use of RF test equipment
• Knowledgeable in solid-state and fiber-based lasers
• Knowledgeable in high power switching power supply and battery management
• Leads and owns projects
• Expertise in emerging technologies

The Service Engineer is responsible for carrying out after sales field service jobs including testing & commissioning, servicing, troubleshooting and overhaul of Ingersoll Rand’s air compressor at our installed bases. He/she will require technical knowledge of compressed air systems, customer orientation and strong ownership mindset to be successful in this role.

Responsibilities

• Perform installation, inspection, diagnose, maintenance and rectification on compressed air system at various commercial and industrial establishments.
• Conduct site and classroom training to customers on compressed air system.
• Recommend necessary actions to improve the efficiency and reliability of customer’s compressed air system.
• General service report writing for internal and external customers.
• Document and prepare field service quality reports. If there are quality problems, it is necessary to feedback specific product defects to the production department and assist customers to take corrective measures.
• Provide technical support for the Industrial Technologies & Services (ITS) products, including but not limited to Compressed Air System, Air Dryers System, Air Audit and IIOT system.

Basic Qualifications

• Degree in Mechanical/Electrical Engineering with strong field service experience in compressed air systems and PLC panel programming or related.
• Singapore Class 3 driving license.

Travel & Work Arrangements/Requirements

Office & Site-based within Singapore for field service jobs at installed bases.

Key Competencies

• Customer Orientation
• Ownership
• Independent
• Basic software applications such as Microsoft Office (e.g., Excel, Word, Outlook) and corporate systems (e.g., SAP).

What we Offer

• Equity Grant
• Employee Insurance
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental
• Overtime & Allowances

JOB RESPONSIBILITY

• Find tender opportunities GeBIZE.

• Prepare Tender and submission.

• Familiar with reinstatement and maintenance work.

• Review and analysis of Tenders Drawings & Documentation.

• Preparing Tender submissions and reviewing Procurement & Reviewing of Contracts, and ensuring compliance.

• Reviewing and commercial management of all projects, to ensure accurate and reliable reporting.

• Review all incoming correspondence from Clients, Consultants & Design Team to identify contractually critical items and to initiate replies.

• Estimating a range of projects in a variety of sectors.

• Improve and implement best practice commercial processes and accurate budgeting.

• Maintain accurate records and provide necessary detailed backup to support commercial tracking and costing.

• On Site measurement of Electrical Services.

• Preparation of specialist sub-contract work packages.

• Preparing monthly Commercial Progress reports.

• Other ad-hoc duties assigned by Construction Manager.

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Summary:

Seeking a Sales Manager / Engineer with a civil engineering background and sales experience in construction or building materials. This role involves liaising with consultants, professional engineers, architects, and façade contractors to drive sales and deliver presentations.

Job Responsibilities:

• Develop and execute sales strategies.
• Build relationships with industry professionals.
• Coordinate with the technical team to present aluminum and glass, façade and curtain wall solutions.
• Coordinate with project teams and provide regular sales updates.
• Follow up on claims and payments from clients to ensure timely processing.

Job Requirements:

• Degree in Civil Engineering
• Sales experience in construction / building materials
• Knowledge of façades, curtain walls, and glazing systems is an advantage
• Strong communication and presentation skills

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Responsibilities:

• Supervise new erections, additions, and alterations (A&A) to existing buildings, including earth retaining and stabilizing systems, as well as specialist designs for demolition works.
• Plan and implement the project,ensuring all construction activities on-site align with the master and detailed work programs.
• Work independently and as an integral member of the Site Management team.
• Prepare, plan, and submit project-related documents such as schedules, method statements, design plans, risk assessments, monthly reports, etc.
• Supervise the execution of construction works to ensure compliance with contract specifications, construction drawings, the company’s quality standards, Environmental, Safety & Health (ESH) practices, and other contract documents.
• Coordinate and liaise with the client’s representatives, relevant authorities, consultants, subcontractors, suppliers, etc., to address both technical and non-technical issues and document resolutions.
• Plan and coordinate site works while resolving drawing details and discrepancies.
• Identify potential and existing problems impacting the work schedule, offering solutions to the relevant team/department.
• Liaise with clients or consultants for site inspections and technical report submissions, ensuring all necessary records are maintained on-site.
• Assist the Contracts Department (QS) in verifying progress payments and claims from contractors.
• Attend regular meetings with clients’ representatives, consultants, and contractors to ensure project progress is on schedule.
• Establish and maintain an effective document control system, conducting reviews of detailed design drawings, project documents, and specifications.

Job Requirements:

• A minimum of a Degree in Civil Engineering, Architecture, or an equivalent field.
• At least 10 years of project or site management experience, particularly in Demolition projects.
• A driven individual with the ability to work independently and lead site management activities effectively.
• Familiarity with wiresaw cutter and waterjet cutter methods for demolition is a must.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore

Responsibilities:

• Tracks and report daily work progress to the Yard Manager
• Ensures that the repair, conversion and construction jobs defined in the Specifications to be performed are carried out in accordance to the budget and schedule set by the Project Manager.
• Appoints approved subcontractors in consultation with Subcontracts Dept and Yard Manager and authorize purchase of equipment, spares and materials
• Ensures that records of work done are copied to the billing and project manager for their follow-up actions
• Responds to customer complaints and take corrective and preventive actions on errors of staff, subcontractors and suppliers
• Implements and maintain the Safety Management and Quality Management Systems.
• Communicate progress, highlights, and prioritizes between Hull Shop and Hull Afloat.
• Carries out special project documentation and case studies including work methods improvements.
• Ensures the safety of personnel through compliance with Occupational Safety and Health and Environmental Regulations.
• Ensures that Health, Safety & Environmental operating procedures are followed and counsel employees about compliance as necessary.

Requirements:

• Diploma or Degree in Marine Engineering/ or related engineering disciplines
• At least 4 years of relevant working experience in FPSO EPC projects
• Ability to read and interpret technical blueprint, plan tools/ equipment/ material take off, prepare project schedule, and input manpower loading
• Willing to go on overseas assignment (2 - 3 months)
• Understands the yard’s various functional systems, ship repair knowledge and related commercial matters.
• Good Degree of planning, organisation, control, problem-solving, decision-making, interpersonal, communication and people management skills required.
• Good knowledge in standards and class requirements on various works in ship repair industry.
• Good knowledge on safety requirements and standards for various works carried out in the yard.
• Possess skill to assess the cost and time required for the additional works.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Assist the Business Development Manager and/or Management to support business unit growth and profit objectives, driving demand for select area of business
• Ensure to meet business unit objectives, sales goals and client retention goals; increase brand recognition; and enhances market position
• Manage PSC marketing efforts including marketing materials, website, social media, tradeshows and events
• Develop a thorough knowledge of products and services, business models, operations, competition, and the industry
• Develop and maintain technical sales expertise, stay updated on all trend and development related to product portfolio
• Track sales progress and support forecast efforts
• Identify business opportunities by identifying prospects and evaluating their position in the industry; researching and analysing sales options
• Support Sales staff in key account management through sales cycle in the preparation of quotations, proposals, service contracts, purchase orders, deliveries and manage customer payments
• Establish pricing strategy to improve on product sales and for new business opportunities
• Support local sales process in tender specification, configuration, product presentation and demonstration, trial, user training and support for onsite service coordination
• Manage customer satisfaction
• Follow up on submitted information by telephone or email
• Be committed to independence, neutrality and impartiality in dealing with colleagues, customers and supplier; safeguarding the confidentiality of customers and suppliers, will not disclose confidential information to third parties unless prior agreement has been provided

Requirements:

• Diploma or Degree in Chemical Engineering, Chemistry, Business Management or Marketing or equivalent. Preferably with experience in Services / Product Marketing
• Excellent Microsoft Office skills specifically Word and Excel
• Excellent administration skills
• Business-to-business marketing experience
• Excellent written and spoken English communication skills
• Good eye for detail
• Team player

We are seeking a highly skilled DevOps Engineer who specializes in AWS to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Hybrid working arrangement.
• Competitive remuneration package. (Monthly competency allowance + Variable bonus)

Responsibilities:

• Design, implement, and manage AWS cloud infrastructure to support scalable, reliable, and secure services.
• Design, implement, and maintain CI/CD pipelines to automate software build, test, and deployment processes.
• Maintain configuration management, build, continuous integration, and deployment tools.
• Source code management and collaborate with development teams on branching strategies and versioning.
• Monitoring automation to effectively detect/predict/prevent issues in the environment and code base.
• Streamline operational tasks, monitoring, and infrastructure provisioning.
• Design and implement production infrastructure architecture based on application requirements, ensuring scalability, availability, and security.

Job Requirements:

• Singaporean only.
• Minimum of 4 years of relevant Cloud/DevOps experience.
• Proficient in containerization technologies such as Docker and Kubernetes.
• Proficient in configuration management systems (Terraform, Packer, Ansible).
• Proficient in AWS (Related certification will be advantageous).
• Strong scripting skills in Python, Bash, JavaScript and shell scripting.
• Prior experience in government/public-facing projects is advantageous.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Description

· Technical & Helpdesk Support, IT/Computer - Hardware, IT/Computer Network/System/Database Admin, IT/Computer - Hardware

· Installation and configuration of office broadband, firewalls, servers, routers, and workstations, as well as office relocation

· Server and Storage Consolidation, Data Protection and Retention

· Virtualization and Cloud Computing Solutions. Inventory control of laptops and licenses and maintain serial numbers.

· To initiate approval and asset write-offs for IT equipment.

· Monitoring, assigning, and purchase requisition laptops and licenses.

· Evaluate the various PCs and laptops' performance and support levels, and make any required recommendations for future purchases.

· Assist with technical and help desk issues.

· Setup a Virtual Private Network (VPN).

· End-user support (Remote Access, Teamviewer support)

· Conduct an internal compliance audit on a regular basis to prevent illegal software and program downloads.

· Coordination of IT Compliance and Audits

· Review and improve company IT Policy

· Drive Security Awareness

· Keep laptops in good working order for troubleshooting, security, and other purposes.

· Responsible for cybersecurity of our system

Requirement:

· Bachelor Degree in Computer Science and /or with IT-related discipline in relevant professional certifications.

· Minimum of three years' experience working in an IT security-related capacity, with a thorough awareness of cybersecurity frameworks and standards.

· Automation Champion. Network Supervision.

· Citizens of Singapore are encouraged to apply

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B