Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

About Beca

Beca is one of Asia Pacific’s largest independent advisory, design and engineering consultancies. After a century of operation, we have grown from a family-owned business to one of the most progressive, client-centric professional services consultancies in our region. We have more than 4,000 employees in 21 offices around the world and have delivered projects in more than 70 countries.

‘Creative people together transforming our world’ is our vision. It reflects our culture, our aspirations and our purpose - to make every day better. We create value through understanding and delivering successful solutions, exceptional service and our enduring relationships and use our skills and systems to empower innovation; helping our clients shape communities, optimise their assets and streamline their operations.

Our employee-ownership model remains key to our future. It underpins our commitment to building and sustaining long-term relationships with our clients, it helps drive our positive, purpose-driven and growth-oriented culture, it sets us apart from our competitors, and it gives meaning to our social contract.

While our experience has been 100 years in the making, it is the fresh talent we're nurturing, the innovative thinking we're developing and the connections that we're forging that get us most excited for the future.
We are a growing engineering consulting company based in Singapore, seeking for a fresh graduate to join us as an Engineer – Mechanical (Building Services).

About You

We’re looking for someone who loves to learn and share knowledge – someone who can bring a fresh perspective to ensure the development of the people around them and who constantly seeks better practice for the overall quality of our work and our client experience.

Your passion, design and problem-solving mindset will be matched with a desire to work on meaningful and significant projects with the team.

Responsibilities

In this role, you will be responsible to:

• Perform initial engineering task on the Mechanical services detailed design (including calculations, computer simulations, etc.) for building projects under the supervision of senior engineers.
• Prepare submission to authorities for approval of design
• Attend to project meeting with Client, PM and Consultants from other disciplines
• Attend site project meeting and site inspection, and respond to technical queries
• Liaise with authorities on plans submission and compliance

PRE-REQUISITES

• Degree in Mechanical Engineering discipline
• Able to work independently and exercise initiatives
• Excellent in both written and verbal communication skills
• A team player; Able to interact and work with colleagues and member of other consultants at various level
• Schedule driven and self-motivated

Job Highlights

• Career Development & Opportunities
• Medical Allowance
• AWS, Variable Bonus

Why Beca?

We offer a comprehensive career growth and development programme along with a vibrant and supportive team environment. If you enjoy working for an organization that values partnership, tenacity, enjoyment and cares for its people and clients, then look no further than Beca.

If this sounds like the opportunity you have been waiting for, apply now with your CV and cover letter online today.

Please include the following information in your resume:

• Education background
• Work experiences
• Reason(s)for leaving
• Current and Expected salary
• Date of availability / Notice Period

The Beca Group of Companies is an Equal Opportunity Employer and all applications are kept strictly confidential.

Our company is at the forefront of innovation in financial technology. Our mission is to develop AI-driven strategies that predict market trends.

We're looking for talented individuals to join our newly founded trading team in our Singapore office as Machine Learning Developers with a specialization in predictive finance.

Responsibilities:

• Develop and implement machine learning predictive models.
• Collaborate closely with team members to create data-driven trading strategies and algorithms.
• Conduct research on academic literature.
• Explore various data sources to craft insightful features for machine learning models.
• Continuously improve and monitor the performance of the ML models.
• Stay up-to-date with the latest trends in machine learning.

Qualifications:

• Bachelor’s, Master’s, or Ph.D. in Computer Science, Mathematics, or a related field.
• Experience: 5+ years of experience in machine learning.
• Technical Skills: Proficient in Python, R, TensorFlow, PyTorch, or similar machine learning frameworks.
• Financial Acumen: Interest in financial markets, trading, and economics. A deep understanding of these subjects is strongly preferred but not required.
• Problem-Solving: Outstanding problem-solving skills with the ability to apply machine learning techniques to complex market data.
• Communication: Strong verbal and written communication skills to work effectively within our collaborative team.

Preferred Qualifications:

• Experience with time-series analysis and forecasting.
• Knowledge of the financial industry and experience working with big data.
• Independent research experience.

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

1.1. Lead and manage the implementation, delivery and operations of digital services, including ICT governance, budget management, application architecture and stakeholder engagement to achieve digital services transformation for the agency.

1.2. Provide experienced technical leadership and direction for digital services

1.3. Define application architecture framework for various components in the end-to-end digital solution and build architecture roadmap.

1.4. Review existing design and implement solutions for improvement from performance, security and usability perspective

1.5. Involved in procurement and vendor management.

1.6. Develop risk identification, quantification and mitigation plan.

1.7. Understand and ensure compliance with policies, standards, and guidelines in Infocomm Technology and Smart Systems Management defined by Singapore Government.

1.8. Prepare technical documentation and design, and conduct sharing sessions

1.9. Improve relevant work systems, processes and SOPs to achieve consistent results.

1.10. Good knowledge of next generation IT, such as cloud technology, IoT, data analytics, system architecture, etc

1.11. Work with Project Manager and clients to handle resources, scope, and schedule

1.12. Design Technology and Application architecture.

1.13. Convert system requirements into software architecture and design documentation.

1.14. Interface and coordinate tasks with Module Leaders to ensure all modules within the system are progressing as planned, and modules can be integrated smoothly.

1.15. Understand and determine clients’ requirements, expectations and design the technical infrastructure.

Job Requirement

1.1. Relevant background in Computer Science/Computer Technology or equivalent.

1.2. Minimum 8 years of working experience in digital service implementation, IT outsourcing management and ICT security.

1.3. Hands-on experience across the spectrum of Web and mobile technologies, such as Microsoft .NET technologies (e.g. C#, ASP.NET MVC 5), HTML5, JQuery, JavaScript, CSS, Microsoft SQL Server/Oracle database management

Roles & Responsibilities

* Project management, system testing, technical analysis

* Providing engineering design support

* technical documentation

* Performing analysis and diagnostics for battery energy storage systems

* Managing battery energy storage systems

Job highlights

4 off days monthly, rest days depend on schedule

Competitive salary 3k and above

Positive and nurturing working environment

Work location: co location

Duration: permanent

Requirements

Qualifications - diploma or high school diploma above

Work experience- at least two year working experience in related fields

Job type- full time

Required languages: English and able to communicate with mandarin speaking customers

Job specialisation- services,engineering

If you have an interest in applying for this role, please WhatsApp me at 98198786 to apply. Only shortlisted candidates will be notified. Priority will be given to Singaporeans

Young hon Lim/ manager

Render private limited

EA licence no 15c7827

• Facilitates planning and development ofquality control systems for specifiedproducts or processes.
• Collaborates with teams of engineers andproduct specialists to ensure customer anddivision quality requirements are met.
• Identifies the root cause of qualityproblems, and coordinates modificationsor other corrective actions.
• Liaising of Calibration Program.
• Periodically inspect instrument accordingto the specified schedule date
• Reviews design, manufacturing, and testingdocumentation.
• Update our Quality Management system(QMS) with incidents, fixes andimprovement.
• Offers technical guidance and support inresponse to quality testing and analysis.
• Ensures contract compliance by reviewingand approving quality requirements forsupplier purchase orders, manufacturing,and other related services.
• Performs other duties as assigned.

Responsibilities:

• Understand Contract Specification.
• Understand Marine Class and Regulatory Requirement, Piping, Special Item and Valve Material Specification.
• Understand P&ID and Piping routines.
• Good knowledge in preparing Technical specification and Material take off (MTO).
• Review and comments technical proposal from vendor.
• Technical Bid Evaluation for procurement.
• Monitor procurement process to meet Project Schedule.
• Review vendor certified Document (VCD).
• Monitor piping bulk material usage, surplus material and warehouse balance utilisation.
• Interface with vendor, other discipline lead, procurement, production, commissioning.
• Attend factory acceptance test (FAT) if required.
• Able to perform piping procurement related activities with no or minimum supervision.

Requirements

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies.

By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in AutoCAD / BIM software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board
• Fluent in English , Good project management and communication skills

Responsibilities:

• Involved in technical reviews and clarifications with customer and suppliers.
• Involved in coordination of design with other engineering disciplines.
• Involved in all electrical engineering designs, calculations, preparing bill of materials including measurement and sizing, and liaise with customer and suppliers for any engineering query.
• Involved in design and construction document preparation and submissions.
• Involved in construction, installation, testing and commission activities.
• Able to use autocad/drafting software and also guide drafters for drafting

Requirements:

• Good team player. Can work with others harmoniously.
• Willing to learn new activities.
• Good communication skills in English both written & spoken.
• Must know basic electrical design knowledge.
• Know how to do electrical cable sizing, voltage drop, cable gland sizing and cable schedule.
• Know how to do lighting calculation and can operate lighting software like Dialux.
• Know how to do overcurrent protection device sizing and selection.
• Know how to do electrical equipment installation.
• Must know how to operate and draw in AutoCAD.
• Must know basic fire and gas detection knowledge.
• Must know how to operate MS office (minimum Word and Excel).
• Prepared to travel if required for overseas meeting
• Min Diploma/ Degree in Engineering or related field.

Job Description:

• Aggressively build, maintain and grow accounts & relationships with key clients to achieve sales earnings and management established targets & objectives
• Grow products sales revenue and earnings per client
• Create, identify and solicit aggressively new project potentials by proactively sourcing for sales opportunities
• Identify, Qualify, Present, Negotiate and Close complex deals
• Build and maintain strong relationships with major clients and trading partners
• Tender preparation / assessment of commercial viability to bid, review technical requirements, customer specification review, best vendor assessments, deriving costing estimates, product / vendor sourcing, commercial negotiations
• Maintain high level of customer satisfaction by following up closely with inter-departments, customers & vendors during pre-sales, order, or post -sales processes to deliver end results effectively
• Sales forecasting, project coordination, after sales support, sales presentations
• Participate in trade shows, exhibitions and conferences
• Prompt submission of reports
• Provide product on networking and data-communication products/solutions within an industrial application environment
• Developing solutions, design & consultancy
• Providing pre-sales advice and consultancy on systems
• Interface with principals on technical aspects of products and solutions
• Manage, develop, build and maintain strong relationship with principals and partners on focal products/solutions under its charge
• Keep abreast of new developments and innovations and/or improved related product applications in areas of responsibility
• Additional role may be assigned by management from time to time.

Job Requirement:

• Diploma or Higher in electrical & electronics engineering or equivalent
• At least 1 year of relevant experience in BD or sales role
• Experience in IT industry or related industries an advantage
• Knowledge of industrial & commercial telecommunication systems and its applications
• Experience in the promotion of industrial and/or telecommunication systems, with proven track records in securing projects related to Telecommunication Solutions (such as network, ex-proof and electrical products)
• Technical experience with industrial and/or telecommunication systems and good understanding of equipment specification is an advantage.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

Zen Career Pte Ltd | 24C2559
Wong Kaili (Kylie)| R21100484

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Job Description:

Are you ready to revolutionize the future of water and wastewater treatment systems while enjoying flexibility in your work environment? Join our innovative team and make a difference in shaping sustainable solutions for various industries. As a valued team member, you will:

• Contribute to the design of cutting-edge water and wastewater treatment systems throughout the tendering and project stages, leveraging your expertise to drive impactful change.
• Prepare meticulous documents and drawings, including Flow diagrams, GA, and technical specifications, ensuring precision and adherence to standards.
• Lead detailed engineering efforts for secured projects, crafting comprehensive plans encompassing PFD, PID, technical specifications, process descriptions, and control philosophies.
• Assess engineering requirements meticulously, from equipment sizing and material selection to piping specifications, ensuring optimal process functionality.
• Collaborate seamlessly within a team to craft compelling commercial and technical submissions for tenders and proposals, engaging with clients and suppliers to deliver outstanding results.
• Facilitate technical discussions and clarifications with stakeholders, fostering effective communication and alignment.
• Contribute to testing and commissioning activities, ensuring project success and client satisfaction.
• Support the preparation of operation and maintenance manuals, ensuring seamless project handover and continued excellence.

Requirements:

• Hold a Diploma or Degree in Engineering Discipline or Environmental Science.
• Possess a minimum of 4-6 years of experience in process design for wastewater industries; senior positions available for candidates with extensive experience.
• Demonstrate proficiency in Aerobic/Anerobic processes, membrane technology (UF, MBR), and sludge handling applications in water/wastewater treatment.
• Exhibit self-drive, results orientation, and the ability to excel both independently and collaboratively within a team.
• Fluent in Mandarin to facilitate effective communication with Chinese clients and vendors.
• Prefer immediate availability or a short notice period.
• Must hold Singaporean citizenship.

Other info:

Work hours: 9.00am to 6.00pm, Monday to Friday.

Medical and Dental Benefits

Insurance

Embark on a rewarding career journey with us and be at the forefront of shaping a cleaner, more sustainable world. Apply now to join our dynamic team!

OMS has built a long-standing commitment to the upstream energy industry as we manufacture and distribute products from facilities and business units around the world. We are an equal opportunity employer and process all employment applications following the relevant regulations in the countries we operate in.

We are now looking for a Product Design Engineer, with strong background in Mechanical Engineering to join the Engineering Team. The individual is responsible to prepare and generate detailed engineering work instructions and procedural specifications, provide technical support to sales function, guide and supervise junior product engineers for day to day work order preparation and perform other assigned duties as and when required. Work scope covers all OMS locations across the region.

Individuals with relevant product design experience in Conductor/Pipe Connectors, Wellhead Systems, Valves, Actuators, Choke, and/or Downhole Systems will be highly considered for this role.

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

We are looking for proactive marine service engineer who are familiar with 2-Stroke & 4-Stroke Engines, Engine Components Overhaul and maintenance, general mechanical dismantling and assembly works.

Job Description:

· Inspect, diagnose and troubleshoot and carryout repair, maintenance or reconditioning of marine engines 2 & 4

Stroke Main/Aux Engines, Crankshaft & Camshaft Replacement and other onboard machinery.

· Collaborating with internal teams to address customer needs and provide technical assistance.

· Performing on-site repairs, maintenance and reconditioning jobs onboard the vessels in shipyards, ports,

anchorage or voyage and offshore with the team of service technicians.

· Carry out removal and installation work onboard vessels and general servicing and repair in the workshop.

· Interact with customers during the work execution.

Requirements:

· Diploma/Degree in Mechanical, Marine or Engineering related field.

· At least 5 years relevant experience within the engine overhaul industry.

· Be able to work on board vessel's engine room environment, Shipyards, Anchorage etc and travel overseas for

assignments.

· Excellent technical knowledge and problem-solving skills.

· Possess positive and responsible attitude towards work.

· Able to work with other specialists of the same or lower skill level and successfully complete projects.

· Ability to work independently.

· Ability to create internal and external work reports.

· Able to do overtime and work during weekends and public holidays for urgent repair jobs.

· Salary will commensurate according to experience & qualifications.

Additional Information:

· 5 days’ work week

· Transport provided from Choa Chu Kang and Pioneer MRT and vice-versa.

· Variable bonus and better medical benefits.

· Career growth & learning opportunity.

Job Description:

• Conduct global structural analyses, including Ultimate Limit State (ULS), Accidental Limit State (ALS), and global fatigue analyses (FLS) for fixed and floating offshore platforms.
• Develop structural design specifications and provide precise fabrication and construction guidelines.
• Prepare detailed structural analysis reports for foundations, support structures, lifting operations, sea fastening, load-out, and dry/wet tow operations, ensuring adherence to classification society standards.
• Perform collision analyses to evaluate structural impacts and propose mitigation strategies.
• Coordinate with classification societies for design and analysis approvals.
• Ensure structural designs comply with offshore wind industry standards and health, safety, and environmental regulations.
• Collaborate with multidisciplinary teams to integrate structural designs with other engineering disciplines.
• Provide technical leadership and mentorship to junior engineers to ensure quality and timely project deliverables.

Requirements:

• Bachelor’s degree in Marine Engineering or Civil Engineering (minimum).
• At least 10 years of experience in Marine & Offshore projects, including conceptual studies, FEED, and detailed design.
• Proficiency in finite element methods and engineering software such as SESAM, SACS, etc.
• Experience or knowledge in wind farm foundations, offshore substations/structures, and floating wind design/analysis is highly desirable.
• Strong leadership abilities, with a commitment to personal and team development.
• Excellent team player with strong communication skills for interactions with clients and third parties.
• Familiarity with marine and offshore industry standards and codes.
• Exceptional verbal and written communication skills, with attention to detail and effective interpersonal abilities.

Key Result Areas:

1. Manage the quality assurance and control of products and services to meet company and customers’ expectations.

Monitor QA/QC and proper documentation for incoming materials, fabrication, and production for

overseas projects

• Prepare inspection and test plans for façade works (Chart H)

• Prepare documents and procedures for inspection/certification

• Implement schedule to ensure QC Inspectors carry out their duties timely and correctly

• Assign proper checking tools for QC Inspectors

• Identify training opportunities for QC Inspectors to attain qualification and upgrade in their jobs

• Assign work checklist and test plan to QC Inspectors

• Organize and implement QMS and audit, including ISO

• Inspect the proper documentation and filing of QA/QC documents

• Search for source information related to QA/QC matters

2. Ensure the quality of products and services provided by suppliers and vendors

Analyse products and services provided by suppliers and vendors

• Inspect key material supplies such as aluminium, extrusions and glass

• Examine prototypes provided by suppliers and vendors

• Supervise the information of supplies in QA/QC systems and inspection records.

3. Attain high QA/QC in manufacturing and installation processes and methods.

• Analyse manufacturing and installation processes and methods

• Inspect method statement and safety risk assessment

• Check tools, equipment calibration procedures and records

EDUCATIONAL QUALIFICATIONS

•General education/Diploma in QA/QC

RELEVANT EXPERIENCE

• Minimum 5 years of working experience in façade industry with good knowledge in product

specifications, reading drawings, industry standards, design, engineering, fabrication,

installation and quality.

PERSONAL CHARACTERISTICS & BEHAVIOURS

• Meticulous with an eye for details

• Decisive

• Collaborative

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Defines and develops the value proposition to lead the formulation and definition of AI use case objectives and technical requirements based on user needs, an understanding of business value industry requirements and machine learning and statistical models.

Conceptualizes, builds, develops, and enhances a client's analytical models. Determines the right modeling techniques to answer the use case, available structured and unstructured data, cost and timing constraints to solve the large and complex business issues and delivers compelling and clear business focused insights.

Works with large scale computing frameworks, data analysis systems, and modeling environments. Embeds AI and analytic models into enhanced large-scale business processes and operational systems by collaborating with Application Developers and Infrastructure Architects.

As a recognized subject matter expert and authority, applies analytics methods and adds value to problem domains.

Influences a client's strategic decisions by using deep industry expertise and deploying innovative AI solutions in the operational systems.

Education And Experience Required

• PhD degree in Computer Science, Engineering, Mathematics, Physics or related field with 5+ years of relevant experience.
• OR Master´s Degree in these areas and at least 8 years of relevant experience.

Knowledge and Skills

• Extensive knowledge of data science and data engineering methodologies including but not limited to classical regression, machine learning, deep learning, association rules, sequence analysis, cluster analysis, computer vision and natural language processing.
• Extensive knowledge of Python and expertise with deep learning frameworks such as PyTorch and TensorFlow.
• Experience with large scale training and inference, and machine learning pipelines in production systems.
• Knowledge of Generative AI and Large Language Models, including prompting and finetuning techniques.
• Understanding of software engineering methodologies and design patterns, as well as IT enterprise architectures (containers and container orchestrations solutions, cloud solutions).
• Ability to translate business requirements into mathematical models and data science objectives to achieve measurable business outcomes.
• Advanced communication and presentation skills.
• Strong analytical and problem-solving skills.
• Excellent interpersonal skills and effectiveness in working across geographical boundaries.

Business Acumen:

• Relates risks and challenges the customer should expect to encounter with the solution with other client efforts or projects (use of internal knowledge of organization; trusted advisor relationship).
• Develops Architecture Specification deliverables that map customer business requirements into complete information systems (technologies, processes and people) or operational solutions.
• Ability to consistently apply business management and financial concepts, capital investment, financial modeling, and general aspects of business contracts. Use this knowledge to analyze business needs and develop meaningful business recommendations.
• Ability to apply knowledge of how the industry uses IT to address business challenges using, for example, technical standards and infrastructure, cross-industry trends that impact IT investment, industry-specific roadmaps, and IT enablers.
• Ability to perform business process analysis/synthesis using modeling or simulation tools and techniques, such as workflows and diagrams to show interrelationships of multiple processes, tracking instances/characteristics of process elements.

Technical:

• Broad IT industry knowledge with depth in multiple areas.
• Has pulse on future technology or operational trends as they relate to and support customer business directions ("trusted advisor" role).
• Broad knowledge of IT and business standards and best practices and how to apply them appropriately in solutions.
• Expert or Master level of knowledge of multiple technologies or IT disciplines.
• Able to design planning for accessibility, scalability, and availability.

Engagement Delivery:

• Ability to write Statements of Work for large enterprise or global level solutions that span multiple technologies or operational areas.
• Ability to apply program/project management methods and processes to define, plan, cost, resource, track and ensure the accomplishment of targeted goals for large enterprise or global level projects.
• Successfully works on project teams (individual success defined by how the organization works as a team, including resource and skill sharing across the organization).

Opportunity Pursuit:

• Able to play a leadership role in business development activities for large, complex opportunities.
• Lead in identifying, qualifying, and closing large, complex opportunities.
• Positions the company offering against the competition.
• Is able to provide the company with the voice of the account.
• Play key role in preparing proposals and bids for large, complex opportunities.
• Manage internal reviews and contribute to solution governance processes for large, complex opportunities.
• Build rapport and trust with client.
• Demonstrates excellent consultative, solution selling skills.

Leadership:

• Collaborates effectively with the project manager to manage regional and global projects as necessary. For architectures of project scope may include the technical management of customer staff assigned to implementation team.
• Plays a leading role in the AI & Data Science profession at both local and regional level.
• Makes consistent and ongoing high quality contributions (at least 4 per year) to the company knowledge systems that are recognized by the AI & Data Science and Architect professions to represent best practice.
• Makes formal recommendations to improve the level of job satisfaction for other company employees working on the project.
• Can significantly contribute in the development of new company services and modifications to the methodology.
• Leads in development and delivery of training.
• Coaches and mentors junior level individuals within the AI & Data Science and Architect professions.
• Leads in the definition of the company unit's processes, standards, and policies.

Consulting:

• Build and manage long-term, strategic relationships at CEO and CIO level.
• Excellent customer influence and negotiation skills.
• Ability to strategically consider all sides of an issue within the contexts of time, breadth, and range of options.
• Ability to systematically gather, assess and apply critical organizational, technical, operational, and sales/marketing information for business decisions.
• Ability to prepare clear, concise, and persuasive communications for multiple audiences, including demonstrating effective writing and presentation skills, listening actively, and projecting a credible image.
• Ability to articulate technical or operational problems into understandable business terms appropriate for the audience.

Communication:

• Able to design and present high-impact messages to customer's Executive level management.
• Able to use a wide variety of presentation tools to persuasively communicate complex messages to multiple audience levels, including Executive level management.
• Ability to use prepared and create complete original materials to communicate with the customer. Communicates mostly strategic information and some tactical information.
• Has excellent speaking and writing skills with proven capability to represent the company at external customer and industry events.

Responsibilities:

• Coordinating and leading design consultants.
• Supervising design consultants and design engineers.
• Reviewing outcomes of design consultants.
• Assessing the risk of geological hazards and ensuring any factors affecting engineering works are identified and managed.
• Preparing reports for management to check design progress and identify risks.

Requirements:

• Minimum of 10 years of geotechnical engineering experience.
• With a Bachelor degree in Civil Engineering recognized by the PE Board, or a qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer. Alternatively, a recognized degree in the relevant field subject to the acceptance of the Engineer.
• More than 5 years of experience in Design and working on LTA projects.

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills