BMS, Building Management System Engineer x 1

5 day week. Attend site rectification, able to work from home if site does not require.

Job Description

• Programme DDC panel
• Well verse in digital and analogue systems.
• High level interfacing with various communications. Modbus, IP, etc.
• Control, monitoring, systems.
• Hvac control, Electrical control, Power usuage
• Attend to fault call.
• Good troubleshooting skill and experience

Dip/ Degree in Engineering

Good understanding and hands on experience in programming of BMS systems is a MUST.

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

• Supply Chain Management / Procurement Exp
• Maintenance Industry / Electrical Spare Parts Exp
• Degree in Supply Chain / Business

Job Scope:

• Responsible for sourcing for direct / indirect materials, dealing with vendors and negotiating for the best price and payment term from local / overseas vendor
• Collaborate and maintain good working relationship with stakeholders and vendors, for planning and initiation of necessary procurement
• Liaison with vendors for timely delivery and monitor all purchases to avoid any shortages, overcharges and defects of materials
• Resolve supply, quality, service and invoicing issues with stakeholders, vendors and identify process bottleneck, propose and implement solutions to resolve issues in a timely manner
• Assist to implement internal procurement strategies
• Prepare, develop and review department contracts for new and existing supplier, and constantly monitoring the validity and expiry of each contract
• Prepare and develop various documentations (e.g. Tender, SOPs, Work Instruction, Reports, etc.) and monitor the validity & expiry of each documentation
• Assist as the System Administrator for section’s Maintenance Management System (MMS)
• Monitor and track Asset Life Cycle for planning of asset renewal and/or disposal
• Support Budgetary Planning and Costing
• Any other duties as assigned

Requirements:

• Possess a Degree in Business Admin / Supply Chain is preferred
• Possess 1 – 3 years of relevant working experience in Asset Management / Supply Chain Management / Procurement
• No experience are welcome and training will be provided
• Prior experience from equipment maintenance industry or with experience in electrical spare parts is advantageous
• Hands-on experience on Enterprise Resource Planning (ERP) Systems (e.g. ServiceNow, SAP, Maximo, Oracle) is advantageous
• Able to work well independently and in a team under a challenging and fast-paced environment

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

830am-6pm

Permanent, 5 days, Yishun

Our client

A MNC in airconditioning industry

Job scope

• First point of contact for new product (Chiller) before dispatching to customer site( (Testing)
• To handle commercial air cooled and water cooled chiller customer complaints
• Hands on technical fault rectification and preventive maintenance, testing n commissioning
• Involve in the entire product cycle from research n development to after sales service
• Documentation update and closing of service log.

Requirements:

Diploma in Mechanical Engineering

2 years of technical experience with knowledge in air-conditioning, chiller, ACMV or HVAC systems

Proficient with testing for new product implementation (NPI)

Added advantage

Class 3 driving license

District cooling project

Large commercial building project

• Design, develop, test, and implement Tableau dashboards and visualizations
• Supporting Business dashboards, projects, and ad-hoc requests
• Manage portfolio of existing and future Tableau dashboards and deliverables (data preparation, security design, access management, data visualizations design, testing, optimization and automation, enhancement roadmap, portfolio catalog, development prioritization, user adoption and training)
• Lead the implementation of enhanced dashboard access and data sharing security framework for Business dashboards requirements
• Deliver meaningful insights, trends, and analysis across all Business areas using a variety of internal and external data sources
• Participate in gathering requirements and consulting with customers to understand business problems and find the best way to visualize outcomes
• Participate in cross-functional projects
• Translate analysis outcomes into compelling data visualizations that are intuitive and prompt insights and actions
• Use data to tell stories by creating visually appealing reports, Tableau dashboards, and presentations for our internal customers

Job requirement

• Bachelor Degree in Computer Science or Information technology
• Basic knowledge of products, services and channels in fin tech industry
• Strong background in database concept.
• Expert in Data Visualization tools (e.g. Tableau, QlikView, Power BI etc.)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform -

https://sg.go.persolkelly.com/job/details/10579

We regret to inform that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E
EA License No. 01C4394 • EA Registration No. R1105286 (Ngiam Xinyi)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Job Description:

• Familiarization of ASME / API Codes & Standards, DNV Rules
• Proven experience of providing solutions on NDT inspection related problems
• Responsible for company NDT management and controls
• Responsible for trouble shot problems related to NDT
• Provide internal training technical guidance to QC Inspectors
• Develop/Review/approve NDT procedures, NDT techniques complying with project/code/regulatory requirements. Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval
• Monitor the performance of NDT personnel through system of review of qualification, competency assessment, Cross checks and reports review
• Risk assessment of NDT works and lead the risk assessment process of NDT in the yard
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about NDT requirements
• Co-ordinate with NDT contractors to develop and update their individual competency matrix
• Maintain all NDT personnel qualification records and update from time to time.
• Keep a copy of all NDT contractors’ certificates
• Review NDT operator qualification and submit for project approval
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing
• Perform Audit on NDT contractors to ensure compliance with project requirements
• Witness & provide technical guidance on standard PAUT validations
• Provide technical support for inspection auditing activities and provide effective audit programming for companywide NDT activities
• Reviewing and commenting on standards, specifications, and enquiries
• Work as part of a team to ensure all regulatory, quality and customer requirements are met
• Verify NDT reports for project requirements compliance
• Creative problem solving - able to suggest and develop new methods and ways of working
• Sound communication skills – able to communicate ideas and results to various stakeholders both in written reports and in meetings, presentations etc
• Understanding of clients’ needs and ability to suggest and apply “fit for purpose” solutions
• Willingness to be flexible and multi-task as part of a team, and contribute to company objectives

Job Requirement:

• Bachelor’s degree in Mechanical Engineering / Master Degree in NDT
• Minimum 5 years experience in fabrication environment as NDT Level III
• ASNT/PCN Level III qualification in UT/RT/MT/PT/ CSWIP (PAUT)
• Reports to Principal Welding and NDT Engineer

R1552011

Peak Ocean EA License No. 18C9336

We are seeking a seasoned Data Engineer with over 3 years of relevant experience in data engineering, business intelligence, and AI-driven analytics with overall 10 years + of experience. The ideal candidate will have a proven ability to design scalable data pipelines, implement machine learning models, and deliver data-driven solutions that optimize decision-making processes. This role requires close collaboration with cross-functional teams to align business needs with technical capabilities while ensuring data integrity, security, and compliance.

Key Responsibilities

• Design, implement, and maintain ETL workflows for managing large-scale datasets.

• Develop cloud-based data pipelines (AWS, Azure) for scalable and real-time analytics delivery.

• Optimize data models to ensure high performance and reliable reporting.

• Create advanced dashboards and visualizations using tools like Qlik Sense and Tableau.

• Incorporate predictive analytics and AI-driven insights to enhance decision-making.

• Automate trend analysis and forecasting using machine learning techniques.

• Develop and integrate machine learning models for real-time predictive analytics.

• Implement AI-driven algorithms for anomaly detection, trend identification, and operational efficiency.

• Establish and enforce data governance frameworks to maintain data integrity, security, and compliance.

• Perform regular audits to ensure high-quality and consistent data systems.

• Collaborate with cross-functional teams to develop tailored data solutions.

• Mentor and train teams on best practices for business intelligence and analytics tools.

• Engage with stakeholders to understand complex business requirements.

• Deliver customized reports and data-driven insights aligned with client strategies.

Qualifications

• Education:

• Bachelor’s in Computer Applications or related field.

• Technical Expertise:

• knowledge in Qlik Sense, Tableau, and other business intelligence tools.

• Hands-on experience with cloud platforms like AWS and Azure.

• Strong skills in ETL workflows, data pipelines, and data modeling.

• Advanced knowledge of AI and machine learning frameworks, including predictive modeling and analytics.

• Certifications (Preferred):

• Qlik Sense Business Analyst Certification.

• Qlik Sense Data Architect Certification.

• Experience:

• 3+ years in data engineering, business intelligence, and AI-driven analytics.

• Proven success in leading data-driven projects and implementing scalable solutions.

We are seeking for a motivated Design Engineer specializes in the design, analysis, and coordination of building works in construction projects. These professionals work closely with architects, structural engineers, and construction teams to ensure compliance with design specifications, and collaborating with various stakeholders to achieve project goals.

Responsibilities:

• Prepare and complete precast shop drawings within specific time and in accordance with the project timeline.
• Check for accuracy and update amendments to precast shop drawings.
• Produce precast layout plans and fabrication shop drawings of precast concrete elements for production and submission to clients.
• Liaise with consultants concerning drawing details and technical issues.
• Liaise internally with production and suppliers on the submission/ issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Incorporate on the drawings (2D and 3D) and update any amendment openings and recesses, architectural features, cast-in-items, lifting system and any other relevant details.
• Coordinate Structural, Architectural and M&E drawings to check and highlight any discrepancy and raise RFI to finalize precast shop drawings for production.
• Request any detail required for precast shop drawings.
• Check every detail and ensure precast drawings tally with construction drawings.
• Attend technical meetings with consultants/clients as and when required.
• Perform any other ad-hoc duties assigned.

Requirements:

· Bachelor's degree in Building/Civil Engineering or related as recognized by PE Board.

· Minimum 5 years’ experience in site planning and coordination works for building projects.

· Minimum of 3 years of relevant practical experience in Precast design for building works in Singapore.

· Familiar with both structural detailing (including rebar detail) and basic architectural detailing.

· Proficiency in software (e.g., AutoCAD, Revit, TELKA or All Plan).

· Excellent organizational and time management skills.

· Strong communication and interpersonal skills.

· Attention to detail and a commitment to quality.

· Ability to work independently and as part of a team.

Job Description:

• Apply cloud (AWS, Azure, GCP) computing skills to deploy upgrades and fixes.
• Put in place continuous integration (CI) and continuous deployment (CD) processes and tools to deliver quality software based on user feedback.
• Develop scripts to automate build, software release, application deployment and system and application management.
• Collaborate with team members to improve the company’s engineering tools, systems and procedures, and data security.
• Conduct automated system-level vulnerability security scan, harden system and application platform.
• Liaise with software and hardware vendors to manage and resolve incidents and technical issues.
• Liaise with 3rd party hosting providers to manage and resolve incidents and technical issues.
• Prepare and maintain technical documentation.

Job Requirements:

• Bachelor’s in Computer Science, Information Technology, Software Engineering, or a related field.
• Past track records in Solaris UNIX/Linux/Windows Systems Administration.
• Expert in code deployment tools (GIT, Nexus, Ansible, and Chef).
• Exhibit expertise in software development methodologies.
• Strong knowledge in setting up DevOps tools.
• Past track records in virtualisation/container technology and setting up continuous integration/continuous deployment processes and tools.
• Knowledge in application development and setting up of middleware.
• Knowledge in vulnerability assessment and remediation.
• Knowledge in setting up and maintaining databases.

Duties & Responsibilities:

Cost Estimation:
•Prepare detailed cost estimates for MEP (Mechanical, Electrical, Plumbing) projects;
•Analyze and evaluate project specifications and drawings to determine the scope of work and associated costs;

Quantity Take-off
•Perform quantity take-offs for materials and labour required for MEP installations;
•Collaborate with project teams to ensure accurate and comprehensive quantity assessments;

Budgeting and Cost-control
•Develop and manage project budgets, ensuring cost control throughout the project lifecycle;
•Monitor and report on cost variations, providing recommendations for cost-saving measures;

Tendering and Procurement
•Assist in the preparation of tender documents and participate in the procurement process;
•Evaluate subcontractor and supplier bids, ensuring competitiveness and adherence to project requirements;

Contract Administration
•Administer and manage contracts related to MEP works, including variations and claims;
•Monitor contractual compliance and resolve any disputes that may arise during the project;

Value Engineering
•Identify opportunities for value engineering to optimize project costs without compromising quality;
•Work closely with design and construction teams to implement value engineering recommendations;

Risk Management
•Identify and assess potential risks related to cost and contract issues;
•Develop strategies to mitigate risks and ensure project success;

Cost Reporting
•Generate regular cost reports to keep stakeholders informed of project financial status;
•Provide analysis and recommendations based on cost reporting data;

Collaboration
•Collaborate with architects, engineers, contractors, and other project stakeholders;
•Participate in project meetings and contribute to the overall success of the project;

Regulatory Compliance
•Ensure compliance with relevant regulations and standards in MEP construction;
•Stay updated on industry trends, codes, and best practices;

Ad-Hoc
•Undertake cost analysis for repair and maintenance project work;
•Other Ad-hoc duties as assigned by the HOD.

Qualifications & Experience:
• Degree / Diploma in Quantity Surveying / Engineering or equivalent from a recognized University.

• Minimum 5 years of related working experiences in industrial, commercial or data-centre projects.

• Good working knowledge in Mechanical and Electrical.

• Organizational skill with attention to detail, adaptable and flexible.

• Good communication and facilitation skills.

• Ability to work well in a team, independently and demonstrate initiative and commitment.

Role: Network Engineer

Work Location: Woodkands/Yishun

Shift Job: Yes

Benefits:

• Attractive Fixed Basic Salary
• Shift Allowance
• Performance Bonus
• 14 days AL & 14 days MC
• Health Insurance
• Very good learning opportunity

Job Description:

Shall administer the network equipment, either on-site or remotely, which shall minimally include

the following:

(a) Checking the logs of the network equipment and network links every morning to ensure no

abnormal activities;

(b) Install, maintain and upgrade all hardware, firmware and software used;

(c) Apply software and security patches as prescribed in Part 2C Patch Management Requirements;

(d) Fine-tune the network or system parameters;

(e) Patch/Re-Patch cables in patch panels, network points and all network equipment;

(f) Labelling of cables, patch panels, racks and equipment;

(g) Create, delete or modify access rights for the network equipment related user accounts in terms

of authentication, authorisation and accounting;

(h) Connect Customer-approved network equipment to the Customer’s network;

(i) Manage IP addresses and IP assignment scheme;

(j) Manage firewall rules setting and security configuration e.g. add, delete or modify firewall rules,

change encryption keys;

(k) Perform troubleshooting to resolve network issues;

(l) Manage incidents as specified in Part 2D Service Management Requirements;

(m) Document and maintain configurations of all network hardware, cabling information and

software used in the operating environment;

(n) Perform routine backup of network configuration for network equipment including firewall rules;

(o) Perform NAC ClearPass administration for security posture check enforcement which minimally

includes the following tasks:

 Review NAC error logs for failed authentications;

 Verify the NAC service is enabled and policies are active;

 Import Customer LDAP Data Interchange Format (LDF) file into the NAC local user

database;

 Housekeep the NAC local users and static host list;

 Update posture policies for endpoint protection and Windows patches;

 Perform NAC software updates and patching;

 Verify validity of certificates, trust lists and update status of Certificate Revocation Lists

(CRLs); and

 Downloading and viewing of authentication and posture reports.

(p) Analyse network utilization pattern and problems, recommend and implement corrective and

preventive measures;

(q) Recommend new or improved hardware, software, configurations, etc. to enhance the existing

system performance and management;

(r) Assist the Customer to evaluate new hardware and software for implementation in the operating

environment, when required by the Customer;

(s) Enforce physical access controls to the network room and the equipment, including escorting its

own Sub-Vendors and the Customer-appointed Supplier, and maintaining proper management of

keys and access logs at all times; and

(t) Provide standby and support service for network upgrades, network implementation or building

maintenance activities such as testing and servicing of building power generators, Uninterruptible

Power Supply (UPS), air-conditioning and fire suppression systems, which may affect the

operation of the equipment in the network rooms.

• Project execution including cost management, coordination with contractors and project related duties.
• Ensure project-engineering work is completed accurately and on schedule.
• To plan the works schedule and work out material requirement for purchasing department to place order.
• Provides regular update of engineering status, drawings, BOMs.
• To direct the daily activities of workers under his supervision. Brief the foremen and workers for every new job and monitor the progress with regular check to ensure satisfactory quality.
• Regular checking of material, equipment and tools to ensure no stoppages.
• Provide training & briefing to all new workers.
• Assess the skills of each worker and grade them accordingly.
• Regular check on workers’ punctuality and be aware of the accommodation & transport arrangement.
• Always advise workers to take necessary safety precautions and work safely.
• To report immediately any accidents, schedule falling behind, damage of equipment, etc.
• Any other duties that may be assigned by the company.

• Designing and implementing new network solutions and/or improving the efficiency of current networks
• Installing, configuring and supporting network equipment including routers, proxy servers, switches, WAN accelerators, DNS and DHCP
• Procuring network equipment and managing subcontractors involved with network installation
• Configuring firewalls,routing and switching to maximise network efficiency and security
• Maximising network performance through ongoing monitoring and troubleshooting
• Arranging scheduled upgrades
• Investigating faults in the network
• Updating network equipment to the latest firmware releases
• Reporting network status to key stakeholders
• An analytical mind
• An ability to learn new technologies quickly
• Good time management skills
• An ability to follow processes
• Strong documentation skills
• Good communication skills –both written and verbal
• Commercial and business awareness

Assist Project Manager in all on-site technical/ engineering matters and deal with Main Con Engineer Prepare submission of shop drawing / Materials / MOS/ Monthly Progress Claims and PM Reports. Lead in Site Coordination and execution relating to the construction project, Deal with Maincon Supervisor ,Workers and subcon. Progress meeting with Main contractor and Safety Team.

To update structural/architectural/ progress with scheduling tools. Supervise and monitor projects are carried out in accordance with the company’s operating procedures, quality standards & contractual specifications.
Ensuring supervisors meet clients’ regulatory work requirements.

With LTA and Bore experience for Road and MRT projects

Responsibilities:

· Overseeing projects at one or multiple stipulated sites.

· Assist project manager is the execution of the projects.

· Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

· Design and built Air Conditioning & Mechanical Ventilation systems.

• Cooling load calculations, Equipment selections, Ventilation Duct sizing & Static Pressure loss calculations

· Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

· Coordinate with Sub-contractor.

· Monitor and ensure progress of works are carried out according to project specification.

· Assist drafting team for design schematic drawing, layout drawing, P&ID drawing. Review and check drawing before submit to main contractor.

· Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

· Support project manager in the administration of contract, claim, variation and any dispute arise.

· Raise MR and order material & arrange manpower for necessary works.

· Advise site team for work schedule and technical issues.

· Make sure project is carried out according to schedule.

· Responsible for site supervision and implementation.

· Responsible for ensuring implementing safety measures.

· Attend periodic meetings on site co-ordination and progress matters.

Requirements:

· Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Mechanical) or equivalent.

· At least 2 Year(s) of working experience in the related field is required for this position.

· Required Skill(s): Excellent leadership, communication & interpersonal skills.

· Able to start work immediate or within short notice period

Job Responsibilities:

• To manage, review and update detailed building system report (tagging database) and their impact list periodically with customer.
• Able to read, understand and develop basic isometric drawings, P&ID, and PFD drawings with AutoCAD software.
• Work on assigned project tasks independently with engineering team, project owner and sub-contractors/ suppliers.
• Coordinate with lower tier subcontractors & suppliers to meet on-time delivery, optimum cost, quality, and safety performance.
• Preparation of BQ material, work-permit application & documentation/ drawing submittal in accordance to project requirement.
• Assist Project Manager to coordinate, monitor and control in accordance to project execution, schedule, cost, and scope baselines.
• Ensuring Quality standards, and all Health & Safety requirements are adhered to our client & company organization’s policy.
• Perform other ad-hoc duties as assigned by Project Manager.

Job Requirements:

• Minimum Diploma in Chemical/Mechanical / Mechatronics Engineering or equivalent.
• Will be advantages if the candidate has prior working experience in Chemical distribution system, Waste Chemical system, Slurry system for Wafer fabrication. Chemical process piping & chemical equipment installation and Tools install Hookup project related to semiconductor industry.
• Possess technical knowledge of ultrapure piping / tubing component & fittings installation, and cleanroom utilities hook-up construction in Bulk & Specialty Gas, Exhaust, UPW, Drain, etc
• Proficient in AutoCADdrawing.
• Proficient in Microsoft e.g. Excel spreadsheet in data entry and update.
• Candidates with at least 1 year of experience in Microelectronics, Semiconductor or Cleanroom Factory Automation environment will be preferred.
• Driven, responsible and matured team player with positive learning & work attitude.
• Good interpersonal, communication (verbal/ written) skills and organizational skills.

Duties & Responsibilities

• Conduct research on the theory and application of emerging new technologies for antenna innovations in wireless communications, including base stations and consumer terminals.
• Develop innovative antenna technologies, provide antenna solutions, and deliver them to product lines.
• Generate intellectual property on new antenna and product innovations.
• Collaborate with electric engineering, mechanical, and material teams on the feasibility study of innovative antenna solutions.
• Support the implementation of technical projects to product projects.
• Support the technology connection between academia and industry.

Qualifications

• PhD in electromagnetic (EM) field, antenna technology, microwave communication, or related fields.
• Deep understanding of EM field and antenna theory.
• Experience with antenna design, implementation, and measurement.
• Proficient in EM simulation tools such as CST, HFSS etc.

Preferred Additional Skills & Experience

• Familiar with the theory and design methodology of metamaterial, metasurface, and metaline, and their applications in various antenna design.
• Experience with the design of antenna elements and arrays for base stations or consumer terminals.
• Familiar with AI/machine learning/deep learning, especially its application to circuit and antenna design.

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

Job description

· Develop and monitor project schedules in consultation with project team.

· Coordinate and obtain inputs from project team, contractors and suppliers to support the development of project programs

· Work on progress forecast and prepare rolling program

· Coordinate with client’s planner on programme and progress matters.

· Update, track and report project progress against planned schedule

· Monitor and control progress to make sure that turnover and cost is in line with master construction program

· Ensure material submission and approval

· Ensure project orders and deliveries are in accordance to agreed schedules

Requirements

·Degree in Civil Engineering with 5 years’ experience preferably in Construction planning and programme coordinator in Water Reclamation Plant Construction Project

· Good knowledge of construction and general application of principles, theories and industry practices and standards

· Proficient in planning and scheduling techniques

· Ability to influence various stakeholders and build long-term relationships.

· Hands-on experience with Primavera P6 is a must

· Strong organizational and interpersonal skills.

· Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time

· Ability to analyse and synthesize complex issues quickly

· Able to start work on short notice is a plus

Resident Engineer (Civil & Structural)

MORE INFORMATION:

• 5 Years Contract
• Location: Nanyang Drive
• Salary : up to $7,000 depending on experience
• IMMEDIATE VACANCY

Our client is a prominent engineering consultancy specializing in water management and environmental services. As part of the global Binnies Group, the company delivers innovative solutions for infrastructure development and sustainability, partnering with public and private clients to enhance urban resilience and environmental stewardship.

RESPONSIBILITIES:

• Lead the site supervision team on all the Civil and Structural and Building Construction works.
• Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.
• Address and respond to all Contractor’s RFI’s and technical submittals.
• Other work scopes include but not limited to assess method statements/ instrumentation reading, coordinate with other discipline engineers and liaise with design team/ QP from HQ.
• Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

REQUIREMENTS

• Good graduate Degree in Civil & Structural Engineering, recognised by the PE Board, Singapore.
• Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.
• Registered with IES as Resident Engineer (Civil).
• A person with good communication and leadership skills.

Lim Pey Chyi (Apple) - [email protected]

Recruitment Consultant (R2090579)

Manpower Staffing Services (S) Pte Ltd

EA Licence: 02C3423

• Diploma / Degree in Civil Construction engineering industry.
• At leat 1 year experience in construction & 2 years MRT experience
• Site engineer with minimum of 2 years’ experience in underground/tunnelling projects
• Must have experience in diaphragm wall and bored-piling

Client: A1 Main Contractor
Location: Hougang Area
Working Hrs: 7.30am – 6pm, 7.30am -12pm (5.5 days week / 6 days)
Salary: $4000 – $5000, Depending on Qualification, Experience & Capability.

Annual Leave: 14 days + Performance Bonus

TO APPLY:

Send in your detailed resume to [email protected] or Whatsapp 89101675

Subject: Site Engineer / Senior Engineer > MRT Project

1) Use MS Word format. (No PDF File*)
2) BioData
3) State your Expected Salary, Current & Last Drawn salary for “ALL” previous employers
4) The Notice Required and Availability Date
5) State all projects handled eg. MRT project and duration

** Our Consultants will contact you for an interview.

Responsibilities:

• Assist Project Manager in all onsite technical, engineering matters and authority submissions
• Prepare submission of shop drawing, materials, method of statement, monthly progress claims and project management reports
• Lead in site coordination and execution relating to the construction project
• Planning of micro scheduling with other trades & disciplines against master programme
• Update structural / architectural / M&E progress with scheduling tools
• Supervise and monitor projects are carried out in accordance to company’s operating procedures, quality standards and contractual specifications
• Ensure supervisors & foremen meets clients’ regulatory work requirements
• Ensure compliance with Temporary Occupation Permit (TOP) checklist
• Responsible for all inspection activities being carried out
• Ensure environmental, safety and health practices are carried out at all times

Requirements:

• Degree in Civil or Structural Engineering recognised by Professional Engineers Board Singapore or Building and Construction Authority
• At least 5 years’ experience in building engineering projects
• Experience with Precast / Prefabricated Prefinished Volumetric Construction (PPVC) / Mass Engineered Timber (MET) projects will have an added advantage
• Completed Quality Mark (QM) project and a registered CoreTrade Foremen or Supervisor will have an added advantage
• Proficient in MS Office, AutoCAD and BIM
• Organised, meticulous with positive work attitude
• Able to work independently and a team player
• Excellent team player, good interpersonal skills and a “can-do” attitude
• Good analytical, supervision and communication skills
• Ability to multi-task in a fast paced and dynamic environment
• Mindset to work in a digital environment

Information provided in response to this job advertisement will be treated in strict confidence and be used for recruitment purpose only.

Job ID: 19411

• Location: Expo
• Working hours: 9am - 6pm
• Salary: up to $4,500 (Depending on experiences)

Job Description

• Provide technical support to customers either on-site or remotely.
• Troubleshoot and repair systems at customer site.
• Install new test systems and software upgrades.
• Work on projects such as creating manuals/SOPs etc.

Job Requirement

• Diploma or Degree in Electronics, Mechatronics, or a related field.
• Proficiency in Japanese (written and spoken) to effectively communicate with counterparts in Japan during weekly meetings, training, or troubleshooting.
• Intermediate skills in Microsoft Excel and Word.
• A team-oriented mindset with strong interpersonal and communication skills (oral and written).
• Willingness to travel frequently overseas on short notice.
• Flexibility to work overtime or on public holidays if necessary.
• A proactive attitude toward acquiring technical knowledge relevant to the role.
• Prior experience in a customer support role.
• Over 5 years of experience in the semiconductor industry.
• Familiarity with lasers, oscilloscopes, spectrum analyzers, or other similar instruments.
  

Interested applicants, kindly send your updated resume to Joanne (R21101135) [email protected] with the email subject header "Job Application for "19411, Assistant Engineer/Engineer".

Only shortlisted candidates will be notified, other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Pasona Singapore Pte Ltd

Joanne Yeo Min Qian
EA License No:90C4069

Registration No.: R21101135

Technical Sales Engineer
5 days
9am-6pm
Kallang
$4000-$6000

The Technical Sales Engineer is responsible for supporting the sales staff in presenting technical presentations of our products as well as assisting on installations of our products in both a pre and post-sales support role

Responsibilities:

• Provide pre- and post-sales technical support to customers
• Technical support of field service engineers and customers when required
• Evaluating and establishing vision system performance specifications
• Manage customer specific projects & documents

Requirements:

• Degree / Diploma in engineering discipline with minimum 1 year experience
• Knowledge in field servicing and semiconductor industry
• Knowledge in Die Sorter or Wafer Sorter will be preferred.
• Ability to troubleshoot electronics hardware system is an added advantage.
• Good Knowledge of PC hardware, OS and networking.
• Proficient in Microsoft application
• Min 1 year related experience. Technical and support to field service engineer and customer

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Our client, one of Asia-Pacific’s leading organizations is looking for:

Test Engineer

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including test planning, analyzing business and system requirements.

Responsibilities:

• Preparing the test environment, designing, and developing the test cases.
• Preparing the test environment, executing the test procedures.
• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.
• Create traceability to requirements, analyze gaps and address them.
• Logging and tracking defects to closure
• Conducting test reviews with internal and external stakeholders.
• Perform root cause analysis for production and user acceptance defects, address test gaps to ensure test efficiency.
• Develop design documents and user manuals which would effectively describe and provide clear instructions on the test automation solution to the end users who include testers and stakeholders.

Requirements:

• Bachelor's Degree in Information Technology or Engineering
• At least 3 years’ relevant experience in executing testing and developing test automation solutions involving devices (UI-based or embedded) and/or back-office systems with familiarity on the full system development lifecycle from requirement, development, to testing and deployment.
• Good written and verbal communication skills.
• Able to work well both independently as well as in a team.
• Certification in software testing preferred.
• Experience in Micro-payments/Automatic Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage.

-----------------------------------------------------------------------------------------------------

Interested applicants can also email CV at [email protected] (for faster processing, please state the exact job/position title applied “Test Engineer”)

Only shortlisted candidates will be notified.

-----------------------------------------------------------------------------------------------------

EA License Number: 10C3636
EA Personnel Name: Jagveer Singh Arora
EA Personnel Registration Number: R22109615

• Oversee the setup, upkeep, and management of servers, networks, and cloud infrastructure.
• Design, implement, migrate, troubleshoot, and maintain IT network infrastructure, focusing on backup, security, redundancy, and disaster recovery.
• Analyze and validate network architecture through usability testing, providing recommendations for upgrades.
• Monitor and report on network performance and status to key stakeholders.
• Plan and manage the deployment and maintenance of end-user computing devices.
• Coordinate and execute tasks for IT operations projects.
• Support the implementation of ISO27001 information security measures and associated security systems.

Qualifications

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Proven experience in digital infrastructure architecture, network design, and cybersecurity strategy.
• Proficiency in cloud platforms, network monitoring tools, and cybersecurity frameworks.
• Strong analytical skills and the ability to communicate complex technical concepts to non-technical stakeholders.

To apply, please visit www.gmprecruit.com and search for Job Reference:

To learn more about this opportunity, please contact Gia Grace at [email protected]

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA License: 11C3793 | EA Personnel: Bautista Gia Grace De Guzman | Registration No: R23111973

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.