Undertake a variety of projects, managing scope, cost, time, risk, resources, procurements, quality and communications in accordance with company policies, processes and procedures, whilst adhering to client contractual obligations. Regular client liaison will take place, managing expectations, and ensuring appropriate stakeholder satisfaction is apparent via pro-active management of project scope ensuring all milestones are met.

· Ensuring all assigned projects are administered in accordance with company’s Quality Management System and to agreed contractual obligations.

· Implementing projects according to contract terms, project goals and objectives, in a pro-active manner, including regular interface with all stakeholders such as clients, certifying authorities, contractors/suppliers and staff/personnel as necessary.

· Ensuring project definition is apparent, clarifying scope, estimates and assumptions with sales team during project handovers.

· Ensuring all appropriate projects are kicked off, their meetings are effective, congruent with the project scope and set the tone for success.

· Attendance to client meetings regarding appropriate project matters as and when required.

· Preparation of project plans in a timely manner.

· Creating and updating project schedules, ensuring critical path activities are understood and communicated.

· Ensuring project procurements are considered in terms of cost, time and quality.

· Understanding project commercial drivers and costs, controlling activities to limit adverse impact upon project finances.

· Preparation of documentation packs for workshop activities to enable efficient product realisation and mobilisation within time demands of the project, ensuring appropriate reviews take place with necessary personnel.

· Preparation of documentation packs for worksite execution (On/Offshore) ensuring appropriate reviews take place with necessary personnel including pre- and post-briefings.

· Ensuring the Design Engineering department is appraised of the project scope such that all engineering activities and calculations are carried out to verify the suitability of equipment

· Where contractually obliged, attendance offshore to assure project execution and fulfilment.

• Leading project planning sessions
• Coordinating staff and internal resources
• Managing project progress and adapt work as required
• Ensuring projects meet deadlines
• Managing relationships with clients and stakeholders
• Designing and signing off on contracts
• Overseeing all incoming and outgoing project documentation
• Participating in tender process i.e. design, submission and review
• Designing risk mitigation plan
• Conducting project review and creating detailed reports for executive staff
• Optimising and improving processes and the overall approach where necessary
• Securing growth opportunities and initiating new projects
• Managing large and diverse teams

We are looking for Mechanical Engineer :

Job Description:

- Provide support to operations maintenance staff in their work flow, maintaining, repairing and installation of HVAC units and Refrigeration systems. (Main tasks of the job scope)

- Mechanical general work

- Other ad-hoc duties as assigned

Job Requirements:

- Monday to Friday, 8am to 5pm

- Saturaday, 8am to 12pm

- Must be able to support OT on weekdays / weekends if needed

Interested applicant, please resume to [email protected]

• Design: Create plans, blueprints, and models, and design systems like heating, ventilation, lighting, and air conditioning
• Review: Review and evaluate blueprints and designs, and identify and fix issues
• Analyze: Analyze structures to ensure they can withstand their intended use and environmental conditions
• Comply: Understand and comply with regulations and building codes
• Test: Ensure safety and test systems
• Monitor: Use computer-based software to design and monitor systems
• Collaborate: Work with architects, civil engineers, or construction crews to develop solutions to structural problems

1. JOB SUMMARY

The SAAC Engineer handles security operations, oversees officers, ensures systems, and supports compliance under EHSS leadership.

1. KEY RESPONSIBILITIES

Security Operations:

- Develop and implement security protocols to ensure the safety of personnel, assets, and property.
- Oversee and coordinate the deployment and performance of security officers provided by external security agencies.
- Monitor and address security incidents, ensuring timely and effective resolution.
- Conduct risk assessments, threat & vulnerability assessments, gap analysis, and site audits to evaluate and improve security measures.
- Draft, implement, and enforce Standard Operating Procedures (SOPs) for security operations.

Security Infrastructure and Systems:

- Design, install, and maintain physical security systems, including CCTV, access control, and alarm systems.
- Identify and rectify deficiencies in existing security infrastructure to maintain functionality and compliance.
- Plan and execute upgrades or modifications to security systems and infrastructure.
- Evaluate advancements in physical security technology and recommend improvements.

Documentation and Compliance:

- Prepare and maintain all security-related documentation, such as incident reports, risk assessments, and compliance records.
- Ensure that all security operations and infrastructure comply with local laws, regulations, and corporate policies.
- Provide detailed reports and updates to the Head of EHSS regarding security operations and incidents.
- Maintain accurate records of inspections, maintenance activities, and system updates.

RBA and SAAC Responsibilities:

- Ensure compliance with anti-corruption policies and RBA Code of Conduct requirements within security operations and the broader supply chain.
- Manage documentation and preparation for RBA audits, including supplier contracts, training records, incident reports, and corrective action plans.
- Conduct risk assessments and implement corrective actions to address non-compliance findings.
- Support anti-corruption training and awareness programs for internal teams, suppliers, and vendors.
- Monitor and report progress on RBA-related compliance activities to the Head of EHSS.

Stakeholder Coordination:

- Work closely with internal stakeholders to address security concerns and implement solutions.
- Liaise with external security agencies, suppliers, and vendors to ensure their compliance with security and anti-corruption requirements.
- Serve as the point of contact for regulatory authorities and auditors during compliance inspections and RBA audits.

1. MINIMUM ACADEMIC REQUIREMENT

- Bachelor’s degree or Diploma in Security Management, Engineering, EHS, or a related field (or equivalent experience).

- Minimally graded as SS by PLRD
- Significant experience in physical security operations, infrastructure management, and stakeholder coordination.
- Expertise in physical security systems, such as CCTV, access control, and intrusion detection systems.
- A background in Environmental, Health, and Safety (EHS) is strongly preferred.
- Proficiency in preparing and managing security documentation, including compliance reports.
- Familiarity with RBA standards, corporate security, and anti-corruption practices.
- Certifications in relevant security or EHS fields (e.g., CPP, PSP, NEBOSH, WSQ Advanced Certificate in WSH) are an advantage.

- Fresh graduates are encouraged to apply

Job Responsibilities:

• Establish, implement and maintain effective Quality Management System (QMS) in compliance with the requirements established by the Company and relevant industry standards (e.g. API Q1 requirements).
• Establish and lead internal audit program covering all operations and functions to ensure adherence to QMS requirements, provide report on internal audit results, and follow-up audit results to ensure close out of corrective/ preventive actions.
• Lead and drive continuous improvement efforts in QMS.
• Lead root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely response to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Manage and supervise the daily operations of Quality Control.
• Supervision and management of QC resources – Inspectors, Quality Coordinator.
• Provide technical expertise and training to Inspectors and Quality Coordinator.
• Ensure proper control and maintenance of quality documents and records.
• Prepare Quality performance metrics and reports on a weekly and monthly basis.

Job Requirements:

• At least a Professional Certificate/NiTec, Bachelor Degree, Post Graduate Diploma, Professional Degree in Mechanical Engineering, Quality, or related.
• Good knowledge of ISO /API Q1 is preferred.
• Strong hands-on experience on quality inspection & measurement is preferred.
• Knowledge/certificate in NDT is preferred.
• Possess good interpersonal and planning skills.
• Minimum 2 years work experience in Quality Management System of manufacturing environment.
• Prefer having experiences in non-electronic industries such as raw material suppliers, metal cutting, oil & gas, mechanical , surface treatment/coating etc.

- Responsible for achieving sales targets and providing technical support to our customers

- Diploma or ITC / NTC2 in Mechanical / Electrical or Marine Engineering

- Entry-Level graduates may apply

- Sales and product training will be provided

- Excellent interpersonal, communication & negotiation skills

- Must possess Class 3 licence and own a car

• Advanced CAD Skills – Proficiency in using advanced computer-aided design (CAD) software to create detailed 3D models and engineering drawings.
• Mechanical Engineering Knowledge – Strong understanding of mechanics, materials science, thermodynamics, and manufacturing processes.
• Problem-Solving – Ability to identify issues in design and find innovative solutions, considering both technical and cost constraints.
• Design for Manufacturability – Knowledge of how to design products that can be easily and cost-effectively manufactured.
• Project Management – Ability to lead and manage projects, including timelines, resources, and cross-functional collaboration.
• Finite Element Analysis – Experience with FEA tools to predict the behavior of mechanical components under various conditions.
• Communication Skills – Ability to clearly communicate technical ideas and collaborate with other teams, including engineers and manufacturers.
• Attention to Detail – A keen eye for detail to ensure designs are accurate and meet all specifications and safety standards.

Requirements:

· Diploma / Degree in Engineering Or ITE with Vast Experience

· Minimum 8 years working experience in related field and 3 years working experience in a Managerial Position

· Strong persuasion and negotiation skill with a variety of people at all levels

· Ability to manage foreign workers

· Possess good leadership qualities

· Excellent communication and problem solving skills

· Able to handle unexpected challenges

· Strong project management skill. Ability to manage multiple projects, plan against timeline and meet deadline, and forecast, budget and monitor project costs

· Previous working experience in ship building Projects will be an advantage.

. Shipyard, shipbuilding/shiprepair experience is a MUST for this position

. Team player with leadership qualities

. Able to plan, coordinate and monitor ship building and repair actiivites

. Able to work under pressure and tight schedules

. Professionally sound and to be able to trouble shoot mechanical / hydraulic defects at Riding crew at Sea / Anchorage.

. Able to work Extended working hours and week ends too

. MOM relevant certificates required

Responsibilities

• Responsible for the planning, leading and supervision of production team to ensure that works are carried out in a safe, timely and cost-effective manner
• Discussion, advising and coordination of works with all relevant parties
• Preparation of reports as required
• Observe and maintain safety rules and regulations

Job Description

1. Design & Development for Special/New Product

2. Claim Handling -Investigate and response to customer claim

3. Conduct Functional & Life Testing

4. Involve in Production rationalization & SDG projects

5. Global Supplier Expansion – Evaluation and qualification of supplier, parts, process

6. Install & Commissioning of production facilities

7. Improvement Project Work:

• Study, propose, and implement projects.
• Rationalize processes and facilities for improve efficiency, quality, cost, and safety.
• Set up new processes or facilities.
• Design and build facilities.

Job Requirements

1. Technical Skills:

· Passion for mechanical automation technology.

· Strong technical inclination, including understanding system design and working principles.

· Hands-on approach – willing to engage in practical work, not just desk-based tasks.

· Minimum 2 years of experience in a related engineering field.

· Preferably possesses knowledge in CAD, PLC, Machine Vision, and Robotics.

2. Personality Traits:

· Committed and self-initiative, with a proactive approach to problem-solving.

· Creative problem solver, thinking innovatively to address challenges.

· Curious with a thirst for knowledge, willing to refer to manuals and undertake self-study.

· Logical thinker with a hands-on mentality, implementing improvements and troubleshooting effectively.

· Sense of responsibility and urgency in addressing issues independently.

3. Communication Skills:

· Cooperative and able to work effectively in a team.

· Proficient in technical report writing.

· Strong communication skills to convey ideas and solutions effectively.

· Able to communicate in Japanese will be an added advantage

Summary

Identify, develop and drive strategic engineering initiatives particularly in relation to Quality, Cost, Productivity improvement. Lead NPI and Product Transfer Projects to successful completion.

Key acountabilities

• Responsible for site Engineering activities, identify and propose opportunities including Out/In-sourcing ideas, EOL management, alternate sourcing and others
• Lead NPI and Product Transfer projects to successful completion
• Initiate value engineering projects to enhance operational capabilities to meet new business needs and raise operational efficiency
• Lead material localization projects for improvements in product cost, quality and operational excellence
• Work closely with cross functional teams to understand engineering related issues in order to provide effective solutions
• Drive yield improvement, reduce COPQ and drive shopfloor productivity through automation and process enhancement
• Improve site Safety through hazard identification and prevention

Requirements

• Bachelor’s Degree in Engineering / Science disciplines
• At least 8 - 10 years of relevant experience in manufacturing engineering in Analytical instruments industry
• Experience in NPI and product transfers is preferred
• Knowledge in manufacturing process of analytical instruments such as Inductively Coupled Plasma- Optical Emission Spectroscopy (ICP-OES), Inductively Coupled Plasma- Mass Spectrometry (ICP-MS), Gas Chromatography (GC), Atomic Absorption Spectroscopy (AAS)
• Good oral and written communications
• Strong analytical and interpersonal skills
• Project Management experience and leadership skills
• Strong drive for results, balanced with effective decision making and problem-solving skills
• Lean manufacturing and Six Sigma Methodology
• Knowledge in ISO 9001, ISO14001 and ISO45001

JD FOR SALES ENGINEER

We are seeking a dynamic and motivated Sales Engineer to join our team.

Job Description

Technical Sales Support: Present product features and benefits, offer technical assistance, and address customer queries. Understand client needs, able to recommend appropriate products. Relationship Management: Cultivate long-term client relationships, provide ongoing support, and collect feedback to improve products. Market Knowledge: Stay up-to-date on industry trends and competitor activities, while training the sales team on technical product details. Sales Growth: Help achieve sales targets, identify opportunities for upselling, and represent the company at events and trade shows. Documentation: Maintain accurate client records and provide reports on sales performance and market trends.

Benefits:
• AWS
• Bonus
• Transport Allowance
• Entitled to commission

Responsibilities:
• To meet assigned Sales Targets
• To manage existing customer accounts and seek new leads
• Establish a good business relationship with customers long term

Requirements:
• Possess own car
• Candidate must possess at least a Diploma & Above
• Good communication skills, team player & target oriented.
• Familiar with MS Excel and MS Word.

· To identify project : Active participation and identification of prospective project through regular contacts with customer (face to customer)

· To liaise with allocated customer for sales acquisition

· To review customer requirements and prepare offers to allocated customer and follow-up offers with customer and keep updated project information

· To finalise and negotiate on contract with customers

· To commit and achieve the order intake budget

· To prepare project schedules

· To maintain existing account and help expand sales network

· Good contact with M&E Contractors & Consultant

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

• Candidate must be able to read 2D and 3D drawings
• Candidate must be able to fabricate materials according to drawings
• Candidate must be a team player as well as a leader, he/she must be able to lead his team during major projects
• He must always keep a lookout for his colleagues with regards to safety issues etc

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Job Title for Posting

Assistant Laser Ablation Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 8.30am - 5.30pm / 2:30pm - 11:30pm / 9:00pm - 6.00am.
• Prepares substrates/precursors, loads samples, in charge of laser ablation process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Cyber Security Engineer (Shift)

Job Description:

• Perform remote standby during weekends, public holidays, and after office hours for Monday – Friday.
• Provide phone/email and on-site (if required) support, resolving, mitigation, troubleshooting and investigating issues pertaining to cybersecurity solutions the company has implemented for its clients.
• Log incidents (either via phone or email) into incident management system (ITSM).
• Track and handle all incidents within client’s SLA.
• Coordinate with stakeholders for service recovery and follow through all the necessary escalation to respective team(s).
• Follow up with client on pending tickets for closure.
• Provide daily handover report after each shift.
• Onsite training during office hours as part of onboarding process and occasional trainings to keep up to date with the product

Job Requirements:

• Professional certifications in Information Technology or related fields.
• Self-motivated, always keen to learn new technologies and able to work independently.
• Possess logical thinking process in solving technical problems.
• A well-natured team player with strong customer centric mindset.
• Good communication skills with clients and various stakeholders.
• Experience or knowledge in Microsoft Windows and Server, Microsoft SQL, Networking and Virtualisation is an added advantage.

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Responsibilities:

• Install, maintain, and repair electrical systems and components.
• Conduct regular inspections of electrical systems to ensure compliance with safety regulations.
• Troubleshoot electrical issues, including diagnosing faults and repairing equipment in a timely manner.
• Assist with the design and layout of electrical systems for new projects or modifications.
• Interpret electrical blueprints, wiring diagrams, and technical specifications.
• Adhere to all safety and quality control standards.

Qualifications:

• Associate's degree or higher in Electrical Engineering, Electrical Technology, or a related field.
• Proficient in troubleshooting and repairing electrical systems and machinery.
• Strong knowledge of electrical codes and safety regulations.
• Familiarity with electrical testing equipment and tools.
• Ability to read and interpret technical drawings and schematics.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for DevSecOps Engineer

Internal Code: A24123

What will you do?

• Support cost optimisation got GCC environment
• Project administration and documentation (procurement, audit etc)
• Drive cloud-related initiatives with other teams (coordination)
• Advise and support project teams with cloud-based domain knowledge
• Support incident management (when needed)
• Plan and organise workshops
• Support operations for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)
• Present and share new ideas or information with department or management committee
• Document requirements, source and evaluate alternatives, and recommend solutions
• Work with the vendors on the solutions and design to seek clarification and acceptance.
• Assess and ensure applications are in full compliance to IM8 and security requirements laid out by Government Agencies.
• Remediate any non-compliance or security findings related to accounts in GCC environment
• Perform scripting or low-code development
• Review and refine existing processes and workflows to improve efficiencies.

What are we looking for?

• Tertiary education in Computer/Computer Science or Information Technology or equivalent
• AWS certifications such Developer (Associate) Certification, AWS SysOps Administrator (Associate), AWS Solution Architect (Associate/Professional), AWS DevOps Engineer (Professional) is preferred
• Knowledge of serverless architectures
• Familiarity with various coding languages, such as Python, Java etc.
• Ability to work both independently and as part of a team with professionals at all levels
• Results oriented
• Hands-on experience in handling operations and incident management
• Strong proficiency in AWS services and architecture
• Experience with infrastructure-as-code tools (e.g., Terraform, CloudFormation)
• Proficiency in scripting languages (e.g., Python, Java)
• Familiarity with security tools and practices (e.g., SAST, DAST, IAST)
• Understanding of cloud security best practices
• Experience with monitoring and logging tools (e.g., CloudWatch)
• Experience in supporting operation for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)
• Familiarity with governance and adoption for enterprise IT environments
• Strong analytical, conceptualisation and problem-solving skills
• Team player with strong organization and people handling skills
• Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders
• Working experience in government environment and/or cybersecurity related fields will be an added advantage
• Advantageous to have experience in the following areas: Government IM8 policies.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24124

What will you do?

We are seeking a highly skilled and motivated Senior Software Quality Assurance Engineer to join our dynamic tech team.

In this role, you will be instrumental in ensuring the quality and reliability of our platform, working closely with cross-functional teams to implement robust testing strategies and drive continuous improvement in our development processes.

Test Strategy and Planning:

• Develop and implement comprehensive QA strategies that cover all aspects of the software development lifecycle.
• Design, maintain, and execute test plans, test cases, and test scripts for both manual and automated testing.

Automation and Tooling:

• Lead the development of automated testing frameworks using Cypress/Playwright for end-to-end testing.
• Implement performance and load testing using tools like Gatling, K6, and Autocannon to ensure platform scalability.

Quality Assurance:

• Conduct contract testing with Pact.js to validate interactions between microservices.
• Perform thorough regression testing when bugs are resolved and new features are implemented.
• Collaborate with developers to ensure code quality and adherence to best practices.
• Maintaining the E2E pipeline and promptly addressing any issues to prevent blocking or delays.

Cross-Functional Collaboration:

• Work closely with product managers, developers, and DevOps engineers to understand requirements and deliver high-quality software.
• Participate in agile ceremonies, providing QA insights and contributing to sprint planning.
• Collaborate with other QEs and team members to prepare the weekly deployment and lead the deployment activities.

Issue Resolution and Reporting:

• Identify, document, and track software defects using industry-standard tools.
• Conduct root cause analysis for critical issues and implement corrective actions.
• Provide regular reports on QA activities, test results, and quality metrics.

Mentorship and Leadership:

• Mentor junior QA engineers, fostering a culture of quality and continuous improvement.
• Stay updated with emerging QA technologies and methodologies, introducing relevant innovations to the team.

What are we looking for?

• Bachelor's degree in Computer Science, Software Engineering, or a related field.
• Minimum of 5 years of professional experience in Software Quality Assurance.
• Proven experience with automation testing, particularly using Cypress for E2E testing.
• Hands-on experience with performance testing tools like Gatling and Autocannon.
• Experience with contract testing frameworks such as Pact.js.
• Proficiency in JavaScript (TypeScript) and familiarity with Go.
• Solid understanding of frontend and backend technologies, including ReactJS, ExpressJS, and Gin-gonic.
• Experience with AWS services, Docker, and Kubernetes.
• Familiarity with CI/CD pipelines using GitLab and ArgoCD.
• Knowledge of relational databases (MySQL, PostgreSQL) and caching solutions (Redis).
• Understanding of REST API, GraphQL API, JWT authentication, and Elasticsearch.
• Experience with logging and monitoring tools like Splunk or OpenSearch

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

We are seeking highly skilled and motivated talents to join our Mapping and Localization Team for Autonomous Driving. This role involves working on cutting-edge technologies to enable high-precision localization and mapping systems that are essential for the safe and efficient operation of autonomous vehicles. The ideal candidate will have deep expertise in algorithms, sensor fusion, computer vision, and robotics, with a passion for advancing autonomous driving capabilities.

Job Responsibilities

• Design, implement and optimize algorithms (e.g. SLAM) for real-time, high-precision localization of autonomous vehicles using sensor fusion of GNSS/IMU/DR, LiDAR, cameras, HD Map, and other sensors.
• Develop and maintain high-definition (HD) maps for autonomous driving applications. Work on the creation, updating, and management of detailed maps that include lane information, road geometry, traffic lights/signs, and other relevant features.
• Improve perception models for feature detection and tracking. Use deep learning and computer vision techniques to detect key features such as road boundaries, obstacles, and dynamic objects to enhance mapping and localization accuracy.
• Develop test plans, perform validation, and run simulations and testing to ensure the accuracy, reliability, and safety of mapping and localization systems in both controlled and real-world environments.
• Stay up to date with the latest advancements in localization, mapping, and autonomous driving technologies. Lead efforts to continuously improve the performance and capabilities of our mapping and localization systems.
• Write professional design and technical documentation.

Job Qualifications

• Master’s or Ph.D. degree in Robotics, Computer Science, Electrical and Electronic Engineering, Computer Vision, Deep Learning and AI, or a related field.
• Working experience in localization, mapping, or autonomous driving systems is preferred.
• Expertise in key mapping and localization techniques including GNSS/IMU/INS, SLAM, and especially deep learning-based perception and sensor fusion.
• Strong analytical and problem-solving skills, strong programming skills in Linux C/C++, excellent communication skills, ability to work collaboratively with the team, etc.