Purpose and Scope

Provide technical support, performance and process expertise to ensure continued efficient operation, good plant availability, reliability and optimization as a member of the Engineering team.

Key Roles and Responsibilities

Technical Support

• Review technical documents.
• Work closely with operations, maintenance, business improvement, safety and procurement teams for improvement projects scoping alignment and execution coordination and review the selection of vendors.
• Review risk analysis on plant and equipment.
• Review the development and implementation of processes for asset integrity management systems.
• Facilitate the provision of discipline engineering support to plant O&M team to resolve issues that arise in the plant requiring expertise beyond the plant level and liaising with the OEMs/ vendors for problem solving. (eg. RCA)
• Formulate strategies for plant integrity and inspection with the maintenance team.
• Verify cross-functional integrity audit findings and recommend corrective and preventive measures.
• Drive equipment reliability and availability reviews to maximise equipment utilisation.
• Provide recommendations for equipment efficiency improvements, including new versus rebuilt equipment, existing versus new technologies and labour versus automation to achieve best value engineering solutions.
• Strategise the use of data analytics across the plant and derive actionable insights for alternative engineering solutions.

Performance and System Optimisation

• Monitor and analyse system performance, carry out troubleshooting and optimization (Steam production, Boiler etc).
• Work closely with the O&M team, establish and continuously improve the monitoring matrix to enable detection of short term and long-term process and performance abnormality.
• Lead the performance test data analysis, identify the gap and improvement area, recommend the actions for rectification and follow through the implementation for closure.
• Establish, improve and monitor the plant and system mass balance (heat, material, and water etc), identify the abnormality such as leaks, uncounted loss, meter/instrument inaccuracy, and efficiency deterioration etc. Lead and coordinate other stakeholders to rectify the issues.
• Provide technical expertise in the optimization initiative conceptualization and implementation. Keep track of the performance and cost savings benefits qualification and post implementation review of optimization initiatives.
• Provide technical and operation insight to support in plant improvement projects and new energy-from-Waste projects including process engineering review, calculations for mass/energy balances, equipment sizing, key equipment selection, material compatibility considerations and other duties assigned for process and engineering evaluation.

Qualification, Skills and Experience

• Bachelor’s Degree in Engineering or related field (Mechanical Engineering/ Chemical Engineering/ Electrical Engineering etc)
• Proven experience (minimum 5 years) in power/utilities plant operations and maintenance
• Experience in handling projects will be an advantage
• Knowledge of reliability methodologies, including FMEA, RCM, and condition-based maintenance
• Familiarity with relevant industry standards and best practices
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive attitude
• Good team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• 5 days, Tuas, Transport provided
• Hybrid work arrangement
• Lots of learning opportunties
• $4000 - $4200 basic, AWS
• Allowances, performance bonus

Administrative Support:

• Manage customer orders and data in ERP systems.
• Ensure timely reporting to stakeholders and maintain accurate records.

Sales and Customer Support:

• Provide solutions and technical advice to customers.
• Evaluate customer requirements and ensure compliance with company terms and conditions.
• Coordinate cost estimations and timelines for deliveries.

Order Management:

• Oversee order handling, ensuring timely delivery and accurate reporting.
• Coordinate with supply chain teams for logistics and transportation.

Teamwork and Innovation:

• Identify process improvements and support the development of innovative solutions.
• Foster collaboration among departments.

Quality Control:

• Inspect products to meet quality standards and customer expectations.

Requirements:

• Possess a Diploma in Engineering or Supply Chain Management
• MInimum 2-3 years of relevant experience in Engineering, Marine/Oil & gas environment
• Strong knowledge of parts sourcing, order processing, and client engagement.
• Ability to manage delivery and invoicing efficiently.
• Responsible and with positive attitude

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

No experience/Diploma in Precision/Mechanical/Mechatronic/Electrical/Electronic/Industrial or related engineering

Basic (no experiene / fresh)-start from $2400-$2800+OT+allowances>$3K++

Diploma in Engineering

Have AWS & Bonus

Japanese MNC

Address: Gul Circle (Have company bus transportation islandwide)

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to be leader

Requirements

• Diploma in Engineering
• No experience / Entry level welcome to apply
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Responsibilities

• Create firmware specifications based on design rules, internal processes, and product/system requirements.
• Design and develop embedded firmware in accordance with established design rules, processes, and specific customer/product requirements.
• Development and implementation of signal processing algorithms in embedded firmware, with cross functionality team.
• Create and conduct review on test methodologies, validate design performance to specifications, debug embedded software, and document final design.
• Support production implementation in the embedded software perspective
• Collaborate with cross functional teams to sustain product lifecycle including customer complaints, failure analysis, etc.
• Liaising with Headquarter on the technical support and technology transfer.
  Verify regulatory compliance with support from head office.

Job Requirements

• Master / Bachelor in Electronic / Computer Engineering or equivalent
• Minimum 3 years relevant experience in embedded software design and development
• Strong knowledge and direct experience with C & C++ programming languages
• Strong knowledge on digital electronics hardware including I2C, SPI, UART, PWM, ADC, USB, etc.
• Experience in designing, coding, debugging and validating on ARM Cortex microcontrollers are preferred.
• Knowledge on Python & Matlab

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Beng Hui Marine Electrical Pte Ltd (a subsidiary of BH Global Corporation Ltd) is looking for someone who is motivated and leads by example and is willing to drive sales through proactiveness and hard work. We always believe in rewarding results.

Responsibilities

• Sales Generation: Contribute to the team revenue in all aspects of the sales process, including lead generation, customer inquiries, order processing, and post-sales support.
• Customer Relationship Management: Maintain strong relationships with existing and potential customers by providing prompt and accurate information, addressing queries and concerns, and ensuring customer satisfaction.
• Proposal and Quotation Preparation: Create sales proposals and quotations, ensuring accuracy, and timely delivery to customers.
• Market Research: Conduct research on market trends, competitors, and customer needs to identify potential sales opportunities and develop effective sales strategies.
• Trade Shows and Events: Assist in the planning, coordination, and execution of trade shows, industry events, and customer demonstrations to promote products and services.
• Administrative Tasks: Perform various administrative tasks, including maintaining sales records, preparing sales documentation, managing calendars, and coordinating meetings and appointments.

Requirements

• Diploma or Certifications in Marine / Engineering or relevant fields.
• Candidate with experience in the marine or similar industry is preferred.
• Industry Technical Knowledge: Understanding of the marine or similar industry, including knowledge of similar products, services, market trends, and customer needs.
• Communication Skills: Good verbal and written communication skills, with the ability to effectively interact with customers, colleagues, and stakeholders at all levels.
• Organization and Attention to Detail: Good organizational skills, attention to detail, and the ability to multitask in a fast-paced environment.
• Problem-Solving Abilities: Good analytical and problem-solving skills to identify and address customer issues and sales challenges effectively.
• Team Player: Ability to work collaboratively with cross-functional teams and contribute to a positive and cooperative work environment.
• Adaptability: Flexibility to adapt to changing priorities and handle multiple tasks with tight deadlines.
• Professionalism: Demonstrated professionalism, integrity, and a customer-focused approach in all interactions.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Menicon is a contact lens specialist embracing precision craftsmanship to see life in detail. Join our family in Singapore, the first manufacturing facility outside Japan for daily disposable contact lens and a base for developing technologies and products with advanced, value-added features.

Be part of our journey toward digitalization, where you’ll play a key role in advancing automated systems and smart technologies to enhance efficiency. Join a team that leverages innovation to transform manufacturing processes and deliver exceptional quality.

Key Responsibilities:

• Provide control system support, to improve efficiency and reliability of manufacturing equipment and processes.
• Collaborate closely with mechanical, validation, and process engineers to optimize equipment & processes including data analysis for problem resolution.
• Initiate and spearhead software improvement projects on control systems and manage testing, validation and implementation
• Engage in cross-functional team projects aimed at machine and process improvements, embodying teamwork, responsibility, and a capacity for independent work.
• Lead training sessions to enhance the technical skills of operational and technical teams, ensuring smooth transfer and operation of automated equipment.

Minimum Requirements:

• Degree in Engineering or related field.
• 3 years work experience in designing control systems for manufacturing equipment
• Competent in SCADA and PLC programming
• Knowledge in C# will be an added advantage

Responsibilities

• To be the liaison for the coordination of M&E works to ensure works are carried out as per schedule and local authorities’ quality standard.
• To supervise and ensure that work done are in accordance with the required drawings and specifications as per the contract.
• To monitor closely and report promptly work progress to superior.
• Coordinate and prepare technical submissions with sub-contractors and suppliers to ensure timely work arrangements.
• Manage project documentation and maintain accurate records.
• Ensure compliance with all health and safety regulations.

Qualifications

• Diploma in Civil Engineering/Building Construction/Mechanical Engineering or any equivalent qualification or relevant on-the-job experience are welcome.
• More than 3-years of work experience in the Construction sector would be preferred.
• Good team player and able to work independently.
• Interested applicants are required to submit their detailed CV and state their current and expected salary.

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

Position Summary

• Ensure that all inspections comply with construction standards, approved procedures and drawings, client specifications, as well as class rules, codes, and regulations (AWS D1.1)
• Serve as the primary contact and advocate for the PaxOcean Quality Assurance Department, prioritizing all structural quality-related issues and any additional responsibilities assigned by the QA Head.
• Collaborate with colleagues within the QA Department and production teams to enhance quality execution through improved coordination.

Tasks and Responsibility

• Carry out Survey and Inspection on jobs in Ship Building / Ship Repair, Module, and Ship Conversion QC-related activity, as per Quality standards as per Surveyor and Client requirements on schedule time.
• To check all the Material verification.
• Prefabrication of Hull panels, assemblies, and units to blocks about approved drawings.
• Co-ordination between different engineering and Quality Assurance sections for resolving engineering and other quality & interdisciplinary checks.
• Checking the plate fit-ups of assemblies and units before final welding.
• Involved with the erection of structures from the entire assembly to the final block stage.
• Checking proper alignment of units/blocks using water tube checks & plumb checks.
• Welding consumable Quality Control.
• Sorting out all documents, related to each project and verifying production documents.
• Review Inspection & test plans by international codes and Client Specification Review Project Weld drawing, weld, and NDT map and welding Procedure Specification
• Oversee various tests, including air leak tests, hydrostatic tests, vacuum tests, hydraulic oil flushing, structural load tests, and hose tests
• Well-versed in monitoring preheating and post-weld heat treatment for welding joints by WPS and codes, particularly for structural and high-pressure pipe welding
• Perform Surveillance during inspection to verify compliance with specified yard procedures including preheat, inter-pass temperature control, and post-heat requirements
• Liaise with NDT team for NDT activities and verify reports
• Prepare the final documentation to ensure compliance with specifications and contract requirements

Job Requirements

• Minimum 5 years of experience in relevant field
• Experience in any degree/diploma
• CSWIP 3.1 and NDT Level-II certification

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Lead RTL design, simulation, and verification for company ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Main Responsibilities:

• Infrastructure Management: Administer servers, storage systems, hypervisors, and network equipment such as switches, firewalls and wireless access points.
• Network Administration: Manage network infrastructure, including routing protocols, DNS, Active Directory, and GPO. To also maintain current VPN connectivity.
• Technical Support: Provide Tier-2/Tier-3 in-person or remote support for escalated issues and troubleshoot hardware, software, and network incidents.
• Collaboration Tools & AV Support: Ensure smooth operation of Microsoft Teams, video conferencing, and meeting equipment.
• User Training: Conduct training and knowledge transfer for end-users on deployed systems, focusing on Microsoft 365 services.
• Peripheral Management: Oversee IP phones, printers, display TVs, CCTV systems, and door access, collaborating with vendors as needed.
• Cybersecurity: Support basic cybersecurity measures and compliance with IT policies.
• Project Support: Participate and/or take ownership in IT upgrades, deployments, and other technical initiatives.

Job requirements:

• Bachelor's Degree in IT / Computer Science / relevant field or higher, certifications in CCNA, VMware VCP, or Microsoft Certified: Azure Administrator is a plus.
• At least 5 years in IT infrastructure, with hands-on expertise in network protocols, virtualization practices, and Microsoft 365 administration and configuration.
• Proficiency in Active Directory, DNS, GPO, SQL Server, and backup solutions (e.g., Druva). Knowledgeable in networking topologies, protocols and methodologies and cybersecurity concepts will be an advantage.
• Excellent Problem-solving skills, good communication skills and fluent in common language, and teamwork ability.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Responsible for developing all electrical, controls, instrumentation documents and specification for the project.
• To carry out electrical, controls and instrumentation related detailed design and preparation of drawings and datasheets
• To interpret and interface with other engineering discipline documents like P&ID, GA, client control and instrumentation systems
• To check and review all electrical, controls, instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors and OEM to resolve technical issue at site and in office.
• To interface with engineers of other disciplines within the engineering department.
• To prepare procurement support including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree or Diploma in Controls, Electronics and Electrical Engineering.
• 3 years relevant experience required for Senior position
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantageous
• Experience in design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and international electrical codes and standards.
• Knowledge in MS, Autocad, Programming languages will be advantageous
• Strong analytical, communication and presentation skills.
• A self-motivated team player with a high level of creativity and initiative.
• Willing to travel occasionally.
• Able to work independently in a flexible, dynamic and fast-paced environment.

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Job Responsibilities:

• Supervise new erections, additions, and alterations (A&A) to existing buildings, including earth retaining and stabilizing systems, as well as specialist designs for demolition works.
• Plan and implement the project,ensuring all construction activities on-site align with the master and detailed work programs.
• Work independently and as an integral member of the Site Management team.
• Prepare, plan, and submit project-related documents such as schedules, method statements, design plans, risk assessments, monthly reports, etc.
• Supervise the execution of construction works to ensure compliance with contract specifications, construction drawings, the company’s quality standards, Environmental, Safety & Health (ESH) practices, and other contract documents.
• Coordinate and liaise with the client’s representatives, relevant authorities, consultants, subcontractors, suppliers, etc., to address both technical and non-technical issues and document resolutions.
• Plan and coordinate site works while resolving drawing details and discrepancies.
• Identify potential and existing problems impacting the work schedule, offering solutions to the relevant team/department.
• Liaise with clients or consultants for site inspections and technical report submissions, ensuring all necessary records are maintained on-site.
• Assist the Contracts Department (QS) in verifying progress payments and claims from contractors.
• Attend regular meetings with clients’ representatives, consultants, and contractors to ensure project progress is on schedule.
• Establish and maintain an effective document control system, conducting reviews of detailed design drawings, project documents, and specifications.

Job Requirements:

• A minimum of a Degree in Civil Engineering, Architecture, or an equivalent field.
• At least 10 years of project or site management experience, particularly in Demolition projects.
• A driven individual with the ability to work independently and lead site management activities effectively.
• Familiarity with wiresaw cutter and waterjet cutter methods for demolition is a must.

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.
• To take on PE Assignee Supervision Role

Job Requirement

• Degree in Civil Engineering or equivalent
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• RE Registration with IES of Singapore