Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

n the broadest sense, project managers (PMs) are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.

By overseeing complex projects from inception to completion, project managers have the potential to shape an organization’s trajectory, helping to reduce costs, maximize company efficiencies, and increase revenue.

The exact duties of a project manager will depend on their industry, organization, and the types of projects that a PM is tasked with overseeing. But across the board, all project managers share responsibilities across what’s commonly referred to as the “project life cycle,” which consists of five phases (or processes):

• Initiating
• Planning
• Executing
• Monitoring and Controlling
• Closing

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

• AUTO CAD Drafting for building & Steel Plate NESTING.
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Responsibilities

- To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labourforce and the work of any subcontractors

- Liaising with local authorities, client's representatives, sub-contractors and consultants.

- Checking and ensuring all plans and work are as per specifications

- Resolving any technical difficulties and problem that may arise on site.

Requirements

- Degree holder in Construction/Building or related discipline.

- Minimum 2years experience from Contruction background.

- Positive personality and good team player.

- Meticulous and responsible.

- Able to multi task and work in tight schedules.

- Able to start with short notice would be an advantage,

Main duties:

• Instrumentation team profile selection.
• Instrumentation works follow-up, correcting deviations with respect to the foreseen schedule.
• Instrumentation progress reporting.
• Interface with the Client
• Identification and assessment of client requirements out of scope.
• Works assignment within the instrumentation team.
• Co-ordination with other design disciplines,scheduling, cost control, Procurement and TR project management.
• Meetings with suppliers.
• Revision and approval of all instrumentation documents.

Main requirements:

• At least 5 years of experience in the same position in oil and gas projects.
• Enforcing obedience to Safety and Environment regulations, reviewing safety and environment manuals. Ensuring operational readiness off all emergency equipment in the Contractor.
• Knowledge of drafting tools: AutoCAD, uStation
• Experience in Fieldbus design
• Experience in DCS/ESD/F&G specifications.
• Knowledge of Process design.
• Knowledge of up-to-date instrumentation technologies and suppliers
• Proven experience in detail engineering of industrial plants.
• Intools expert user.
• Experience and understanding the EHS requirements

Working Place: Jurong Island

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

Work closely with project managers and stakeholders to coordinate project resources and information, ensuring that the project requirements are met. As a Project Engineer (PE) you will be responsible for working across multiple teams while executing project plans and revising as appropriate to meet changing needs and requirements.

Project Tasks

• Discipline in detailed documentation and reporting of projects plan, project status and issue logs.
• Identify and schedules customer-facing meetings to assure effective completion of projects Manages day-to-day operational aspects of a project schedule.
• To assist in install, setup, testing and provide technical support for the product installation team.
• Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Review technical documentation of projects and implementations as well as service deliverables.
• Manage customer relations by fostering productive and effective relationships with business users.
• Timely escalation of critical situations and any likely project risk that can impact project delivery scheduled to Manager.
• Effectively and accurately set client expectations and deliverables.
• Write documents describing functional specifications, protocols, test cases and maintenance guidelines for medical equipment.
• Keep documentation of implementation on all medical equipment.

Requirements

• At least 4 years of experience working in the IT industry, preferably involved in project delivery adopting SDL
• Familiar with Networking, Microsoft Operating System and SQL Server
• Relevant experience or interest in project management will be highly advantageous
• Excellent communication skills (both written and verbal) and interpersonal skills
• Great attention to details and results-oriented
• Ability to influence and present to the leadership team
• Committed to the values of integrity, accountability, transparency, scientific rigor and drive
• Good verbal and written communication skills

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Description:

• Perform preventative maintenance, repairs, installations, commissioning, and general servicing activities.
• Effective collaboration with management is vital to ensuring high levels of customer satisfaction through direct engagement.
• Regular communication with customers, the service team, and subcontractors is encouraged to foster positive relationships and enhance the overall customer experience.
• Timely responses to system breakdown and the execution of scheduled preventive maintenance are crucial responsibilities.
• Coordinate and monitor work progress with customers and relevant stakeholders to facilitate prompt installations, as well as supervising subcontractors' activities on-site.
• Ensure that all installations adhere to project specifications is critical. This role entails managing system applications, drafting, database generation, and the commissioning of the systems for which one is responsible.
• Available for 24/7 standby duty is expected to adequately address any complaints or breakdowns.

Job Requirement:

• Bachelor's degree in Engineering or its equivalent with minimum 3 years relevant working experience.
• Excellent communication and interpersonal abilities with a proven capability to work collaboratively with both internal and external partners.
• A proactive self-starter with strong initiative and a collaborative spirit.
• An adaptable individual who can thrive under pressure and handle multiple tasks in a fast-moving environment.

We are looking for a Desktop Support Engineer with expertise in Hardware Support in Desktop Systems, Mobile Devices and IPT. You will be part of the Client Services On-Site Delivery (OSD) team within Core Engineering that provides on-site technical support for internal business users, covering workplace systems, hardware, and multimedia support. The role involves hardware lifecycle management, infrastructure build-out, troubleshooting, and multimedia event support, with occasional data center services, cabling, and patching in regional offices.

Key Responsibilities

• Provide on-site support for workplace hardware and software, including desktop systems, mobile devices, and IPT.
• Handle hardware setup, provisioning, and lifecycle management, including inventory scanning and disposal.
• Offer second-level support for internal users and high-touch support for Platinum users.
• Perform Move, Add, Change (MAC) tasks, power-down execution, and BCP site maintenance.
• Troubleshoot Windows 10/11 systems, desktop builds, and software distribution processes.
• Document and update procedures, ensuring clarity and accessibility.
• Collaborate with engineering teams on workplace-related projects and pilot testing.
• Manage vendor coordination for project and operational needs.

Skills and Qualifications

• Strong knowledge of desktop hardware, telecom, multimedia, and mobile devices (e.g., BlackBerry).
• Expertise in Windows 10/11 troubleshooting and software distribution processes.
• Excellent communication and teamwork skills to engage with end users and offshore teams.
• Ability to prioritize tasks, track multiple assignments, and escalate issues when needed.
• Flexible schedule with the ability to work extended hours or weekends when required.
• Vendor management and coordination experience.

This role is on an initial 6 months contact role.

Position Overview:

We are looking for an experienced and motivated Vetronics Engineer to join our dynamic team. The Vetronics Engineer will be responsible for the design, development, and integration of electrical and electronics systems in specialty vehicles for Defence, Public Security and commercial applications. This role demands a strong understanding of electronics, vehicle systems, and relevant automotive and/or military standards, with a focus on ensuring high performance, reliability, and operational effectiveness.

Key Responsibilities:

• System Design: Develop detailed specifications and designs for electronic systems used in vehicles. This includes high and low voltage systems, communication interfaces, and sensor integration, electrical schematics and harness design.
• System Integration: Integrate and test electronic components and systems into various vehicle platforms, ensuring interoperability with existing systems and compliance with technical requirements.
• Testing & Validation: Perform comprehensive testing and validation of vetronics systems, including functional, environmental, and stress testing, to ensure systems meet relevant standards and performance criteria.
• Troubleshooting & Support: Provide technical support for troubleshooting and resolving issues related to vehicle electrical and electronics systems. Develop and implement corrective actions and improvements as needed.
• Documentation & Reporting: Prepare and maintain thorough documentation of design processes, integration procedures, test results, and system configurations. Create technical reports and presentations for internal and external stakeholders.
• Compliance & Standards: Ensure all designs and systems adhere to relevant automotive and/or military standards, regulatory requirements, and industry best practices. Maintain awareness of changes in standards and regulations.
• Cross-Functional Collaboration: Work closely with the engineering team, and other project team members to ensure seamless integration of electrical and electronic systems with vehicle hardware and software.
• Innovation & Improvement: Research and implement emerging technologies and innovative solutions to enhance system capabilities, performance, and reliability. Contribute to continuous improvement initiatives within the vetronics domain.

Qualifications:

• Education: Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field. Master’s degree or higher qualification is a plus.
• Experience: At least 2 years of experience in vetronics or a closely related field, with a proven track record in designing and integrating electronic systems for defense, military or vehicle applications.
• Technical Expertise: Strong knowledge of electronic circuit design, embedded systems, control systems, communication protocols (e.g., CAN) and sensor technologies.
• Software Skills: Proficiency with electronic circuit design tools (e.g. AutoCAD), simulation software (e.g., MATLAB/Simulink), and embedded software development tools.
• Problem-Solving: Excellent analytical and problem-solving skills, with the ability to diagnose and resolve complex technical issues effectively.
• Communication: Strong verbal and written communication skills, capable of conveying complex technical information to diverse audiences.
• Security Clearance: Ability to obtain and maintain a security clearance as required by the role.

Preferred Skills:

• Experience with automotive and/or military vehicle standards and protocols
• Familiarity with vehicle electronics design and environmental testing procedures.
• Knowledge of cybersecurity principles as they apply to vehicle electronics.
• Experience with project management and leadership in a technical environment.

Job Description

Key Responsibilities:

• Conduct thorough testing of the Applied Materials SmartFactory® MES solution to identify bugs, issues, and usability concerns.
• Develop and execute test plans, test cases or test scripts to ensure comprehensive test coverage.
• Collaborate with the development team to understand project requirements and functionality in order to create effective test scenarios.
• Report and track defects using appropriate bug tracking tools, and work closely with developers to resolve issues.
• Perform regression testing to ensure that previously identified defects have been fixed and that no new issues have been introduced.
• Participate in design and requirement reviews to provide input on testability and potential quality issues.
• Stay up-to-date with industry best practices, testing methodologies, and emerging technologies to continuously improve testing processes.
• Communicate test results and quality metrics to product owner in a clear and concise manner.
• Develops release note and detailed documentation.

Functional Knowledge:

• Have experience with GIT experience.
• Experience with Oracle DB or MSSQL Server is a must.
• Need some experience with Linux in clustered environment is a plus.
• Understanding of accessibility testing principles and guidelines.
• Experience in testing APIs and web services.

Business Expertise:

• Prior experience with MES/CIM Software is a plus.
• Prior working experience in semiconductor industry or semiconductor knowledge will be preferred.
• Understands key business drivers; uses this understanding to accomplish own work.

Leadership:

• No supervisory responsibilities but provides informal guidance to new team members.

Problem Solving:

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents.

Impact:

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills:

• Explains complex information to others in straightforward situations.

Travel:

• Regional travel is expected.

Experience:

• 3-5 years.
• More years of experience will be considered for senior position.

Key Responsibilities

• Develops code for moderately difficult software projects. Design and implement bug fixes
• Designs moderately difficult software projects
• Develops software documentation
• Troubleshoots a variety of moderately difficult software problems. Performs software tests on code and enhancements. Defines software specifications
• Interfaces with external customers regarding software issues
• Interfaces with internal customers for requirements analysis and schedule
• Compiles data for regularly scheduled or special reports, analysis and statements

Job Requirements:

• Bachelor degree in Electrical Engineering
• 4 - 5 years of proven experience in following technologies
• Familiarity with web technologies
• Windows Application development experience
  Track record of creating multiple Tier windows applications, using C# technologies with SQL DB backend
• Experienced C# Developer
  Experience with WPF MVVM design pattern.
  WPF experience
  GUI development
  Hardware integration knowledge.
• SQL database
  Queries
  DB creation, migration, efficiency improvement
  Indexing
  Stored Procedure

Work Location:

• Upper Changi (Bus 2, 5 and 37 available)

Work Arrangement:

• Fully Onsite

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are seeking an experienced CSA Engineer with expertise in waterproofing, piling, and structural review for GMP and cleanroom construction projects. The ideal candidate will be responsible for overseeing structural and architectural works, ensuring compliance with industry standards and regulations. The role requires a strong background in cold room and cleanroom construction within a Good Manufacturing Practice (GMP) environment.

Key Responsibilities

Structural & Architectural Engineering:

• Oversee and coordinate piling, waterproofing, and structural construction works.
• Review and assess engineering drawings, specifications, and technical documents for compliance with project requirements.
• Ensure proper execution of cold room and cleanroom construction according to GMP standards.
• Work closely with contractors and vendors to ensure quality control and adherence to design requirements.

Project Management & Site Coordination:

• Monitor construction progress, schedules, and site activities to meet project milestones.
• Identify and resolve technical issues related to structural, waterproofing, and piling works.
• Liaise with cross-functional teams, including MEP (Mechanical, Electrical & Plumbing) engineers, project managers, and QA/QC teams.
• Conduct regular site inspections, audits, and risk assessments to ensure construction quality and safety.

Compliance & Documentation:

• Ensure all structural and architectural works comply with GMP, cleanroom, and industry regulations.
• Prepare and review method statements, risk assessments, and work permits for construction activities.
• Maintain technical documentation for waterproofing, piling, and structural works.

Required Qualifications

• Bachelor’s degree in civil/structural engineering or related field.
• Minimum 5 years of experience in CSA engineering, preferably in GMP, cleanroom, or pharmaceutical construction projects.
• Strong knowledge of piling, waterproofing, cold room, and cleanroom construction techniques.
• Familiarity with GMP, BCA regulations, and cleanroom classification standards.
• Proficiency in AutoCAD, Revit, or structural analysis software is a plus.
• Strong ability to liaise with contractors, consultants, and project stakeholders.

Why join us?

• Generous Leave Policy including 3 days to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Job Overview

We are seeking an experienced Automation Engineer with expertise in DeltaV systems to support the commissioning, testing, and optimization of automation processes in a pharmaceutical manufacturing environment. This role focuses on ensuring compliance with GMP standards while driving efficient system performance.

Key Responsibilities

• Configure, maintain, and troubleshoot DeltaV automation systems to support manufacturing operations.
• Ensure reliable performance and minimal downtime of control systems.
• Lead the commissioning and testing of automation systems, ensuring readiness for operational use.
• Develop and execute protocols for FAT, SAT, IQ, OQ, and PQ phases.
• Ensure automation systems comply with GMP, GAMP 5, and FDA regulatory requirements.
• Maintain accurate documentation and support audits as required.
• Identify and implement improvements to enhance system efficiency and reliability.
• Conduct root cause analysis for automation issues and provide corrective actions.

Qualifications

• Education: Bachelor’s degree in Engineering, Automation, or a related field.
• Experience: 5-7 years in automation, with a strong focus on DeltaV systems, commissioning, and validation.
• Skills:Proficient in DeltaV configuration, commissioning, and troubleshooting.
  Hands-on experience with validation processes (FAT, SAT, IQ, OQ, PQ).
  Strong understanding of GMP and regulatory requirements.
  

Responsibilities:

• Set up, deploy, and maintain systems and networks for project requirements.
• Develop technical proposals and deliver solutions within quality standards and deadlines.
• Provide technical guidance, expertise, and support in problem-solving and decision-making.
• Participate in cybersecurity risk assessments, system hardening, and VAPT activities.
• Conduct UAT for systems, storage, switches, routers, and firewalls.
• Perform system and network hardening, VAPT tests, and recommend solutions.

Prerequisites:

• Degree in Information Technology, Computer Science, or a related field.
• Hands-on experience with designing, setting up, hardening, and deploying Windows/Linux OS, storage solutions, and MSSQL servers.
• Proficiency with Huawei/Cisco switches, routers, FortiGate firewalls, NMS, and MFA software.
• Skilled in preparing documentation for system setup, deployment, and hardening per project requirements.
• Strong knowledge of cybersecurity principles, hardening techniques, scripting, and related tools.
• Certifications such as CCNA, CISSP, Security+, or CISA are advantageous.
• Willing to provide support during off-hours for project-related system issues.

Job Description & Requirements

Job duties and responsibilities:

1. Perform certification of release to service

2. Perform and certify aircraft maintenance tasks

3. Inspect, troubleshoot, and repair all associated aircraft systems

4. Signing off tasks and complying with airworthiness requirements

Experience and Qualifications:

1. Minimum at least five years’ experience as an LAE capacity

2. A CAAS license or an Aircraft Maintenance License can be transferable to a CAAS license such as EASA, CASA, DCA, CAD or CAA.

3. Possess at least 2 B1 or B2 aircraft-type rating on A320, A330, A350, A380, B787, B777, B747, and/ or B737.

4. Well-written and spoken English essential.

5. Good computer and interpersonal skills

Responsibilities

• Responsible for the design, development, maintenance of applications and systems as well as IT production and management of the Bank's technical infrastructures.
• At the forefront of technological innovation, its teams provide technical and functional support for the development activities and projects of the various Corporate and Investment Banking professions in an international environment.
• Develop and implement advanced machine learning and deep learning models to automate and transform business processes in the capital markets value chain
• Use and create data science models to produce strategic insights, develop sophisticated predictive models and deploy solutions meeting current standards.
• Use generative AI models to create synthetic financial data, simulate market scenarios, generate new investment ideas, automate post-trade processes, and enrich seller interactions with relevant stakeholders.
• Collaborate with quantitative analysts and traders to design solutions based on artificial intelligence.
• Develop a product mindset on the exploitation of AI models to improve and build functional blocks in the IS ecosystem
• Work closely with technical and business teams to resolve complex problems.

Qualifications

• Experience required 10 years minimum in an IT functional architecture position
• expertise in machine learning, deep learning, generative AI and MLOps.
• Knowledge of data management practices to clean, preprocess and transform data sets for model training
• Mastery of AI algorithms and frameworks (e.g., Tensorflow, PyTorch, Scikit, etc.)
• Knowledge of GEN AI and LLM technologies on the public Cloud using RAG patterns
• Understanding the ethical principles to better generate embeddings for GenAI.
• Expertise in Python, .NET or Java, DevOps / MLOps / LLMOps (GitLab CI/CD, Kubernetes, AWS Cloud)
• Only Singaporeans

Next Step

• Prepare your updated resume and expected package.
• Simply click on 'Apply here' or email to [email protected] to drop your resume
• All shortlisted candidates will be contacted.

Tamanna Bilandi

EA Licence No. 91C2918

Personnel Registration No. R2096241

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Infrastructure Engineer

Job Description:

• Operate, manage, and maintain VMWare ESX and HCI technologies

• Knowledge of administering Windows Server 2016, SQL 2016 and Windows Clustering technology

• Red Hat administration

• Plan, coordinate, and execute product installations, product upgrades, patch installations and hot fix installations

• Create, manage, and maintain documentation related to the managed systems and operation

• Perform hardening benchmarks adhering to defined procedure and checklist. Maintain the infrastructure in such a way that it is secure against unauthorized access.

• Deploy and deliver the project deliverables as stated in the project scopes extracted from the proposal/contract.

• Update the Infrastructure team lead on the project progress and status.

• Implement changes through Change Management Process on system components. Ensure change impact is evaluated, contingency plan and test plans are created to support the change request.

• Build, configure, and rollout new releases through Release Management Process on system components that affect operations. Organize training for new releases where necessary.

• Identify, isolate, resolve, escalate and close incident/problem ticket according to ITSM Incident/Problem Management Process.

• Ensure backup and recovery of system components is carried out, so that critical services can continue in the event of a disaster.

• Perform daily system health check

Requirements:

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Computer Science/Information Technology, Engineering (Computer/Telecommunication), Engineering (Electrical/Electronic) or equivalent.

• At least 3 year(s) of working experience in the related field is required for this position would be advantageous.

• Preferably possess certifications such as Microsoft MCITP, VMWare certified professional or equivalent

• Full-Time position(s) available.

Follow the Project Management Process from award until handover including all statutory requirements and deliverables

• Develop comprehensive project plan for multiple projects

• Coordinate and be involved in pre-& post tender survey / ordering and pre-con survey on the existing building.

• Provide regular project management reports for management during Work in progress (WIP) review. • Directs and coordinates activities of project team which includes attend site meeting, involve in all internal and external inspection / handover of projects for public use with no critical defects

• Coordinate daily activities and resolve technical problems

• Strong project management skills.

• Good planning, analytical and organizational skills.

• Financial ability.

• Elevator modernization knowledge and experience.

• Great interpersonal skills and customer-oriented behaviour.

• Collaborative approach, strong team-working skills and self-motivated

• Demonstrate leadership ability.

• Desired university / diploma education in Mechanical, Electrical.

• Familiarity of elevator and escalator products knowledge. • Minimum 4 years of project management in lifts & escalator (preferred) or other relevant experience. • Good spoken and written English / Mandarin (Added adavantage)

• Preferably possesses own transport

Design & Drafting: Assist in creating and refining electrical drawings, ensuring they align with project specifications and industry standards.

Calculations: Perform basic load calculations and other engineering analyses required for project development.

Material Management: Generate material take-offs to aid in accurate project planning and cost management.

Project Execution: Support the timely execution of deliverables by coordinating project schedules, resources, and deliverables.

Coordination & Support: Assist in the arrangement of equipment installation, testing, and commissioning activities, ensuring smooth project completion.

Problem-Solving: Collaborate with the manager to address client inquiries and provide effective solutions for electrical issues.

Stakeholder Communication: Maintain consistent communication with clients, vendors, contractors, and sub-contractors to ensure project alignment and success.

Client Relations: Build and nurture strong relationships with customers and clients to foster trust and satisfaction.

Personal Attributes:

• Detail-oriented with a proactive problem-solving attitude.
• Excellent team player with the ability to work independently when required.

Training & Development:

• Specialized training in PLC programming to enhance your skills and career trajectory.
• Opportunities for professional development and certifications.

Additional Perks: Comprehensive support for career growth within a supportive team environment

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with office in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local / MNC like SIA, CBRE, JLL, Shiseido, TotalEnergies, Certis, Engie, and many more!

Responsibilities:

- Project Management of IOT/sensor deployments

- On site visits & surveys before project confirmation

- Coordinate and manages technicians and vendors

- Coordinates procurement with purchasing dept

- Experience in green building (e.g. energy monitoring) deployments

- Keep track of project progress & updates stakeholders

- Propose/validate solutions

Requirements:

- Technical/engineering background and/or experience in Computer / Electronics / Sustainability / Facility Management

- Min 2 years of relevant experience

- Can multitasks

- Work well in team

- Proficient in MS Excel, MS Word

- Strong interest in new exciting world of IOT

Benefits

1. Rewarding career at the leading IOT company in Singapore

2. Good compensation commensurate with experience and skill

3. Free transportation to/fro office and home

4. Free lunch in office

5. 5 working days per week