About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

An established Civil & Structural Engineering Consulting firm in Singapore requires the following:

Senior Inspector / Inspector – Civil & Structural

Responsibilities:

• To assist QP(Supervision) and QAQC engineer on the QAQC and inspection of precast concrete segment in the precast yard (Singapore)
• To review contractor’s submission and attend meetings whenever necessary

Requirements:

• Registered with IES as RE/ RTO in Singapore
• Minimum 3 - 5 years of relevant experience in the inspection and quality control monitoring of precast concrete elements.

Interested applicants, please write-in with detailed resume, stating personal particulars, current & expected salaries, availability and experiences to [email protected]

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Job Description:-

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawings.
• Supervise and monitor workers / welders on site for installation or maintenance.
• attend site meetings with clients / architects and authorities on project technical matters.

Requirements:-

• Minmum Diploma in either mechanical or Mechatronics Engineering or other relevant discipline.
• Required skill(s), MS Office, MS Project AutoCad.
• Has work experience in construction sites and project management.
• Responsible team player with the ability to work independently in challenging projects and timelines.

• Plan and execute work plans on site.
• Prepare weekly progress reports and weekly work plan on project work.
• Work with design engineers for as-built drawings, section drawing.
• Work with purchaser to source & make orders for all materials required and purchase the required materials according to project timeline.
• Supervise and monitor workers / welders on site for installation or maintenance.
• Attend site meetings with clients / architects and authorities on project technical matter.

Requirement:-

• Minimum Dipoma and Degree in Mechanical Engineering.
• Required skill(s) MS Office, MS project, Autocad.
• Has work experience in consruction sites and project management.
• Responsible, detail-oriented and able to multi task.
• proactive team player with the ability to work independently in challenging projects and timelines.
• Possess Class 3 driving license will be an advantage.

Responsibility

• Co-ordinate and supervise site works and subcontractors.
• Keep track of the site schedule to ensure works are on time.
• Able to interpret drawings and calculations of site materials
• Liaise with QS to monitor work schedule , claim and Vos.
• Report to Construction Manager / Project Manager on site matters and progress of work.
• Attend to site meetings
• Compliance to safe work procedures and maintain good house-keeping

Requirements:

• At least Bachelor's Degree or equivalent in civil engineering or equivalent.
• At least 5 years experience in civil engineering , relevant experiences in construction of civil infrastructure project , LTA project.
• Practical experience and knowledge of tendering works
• Good command of English
• Able to draw 2D / 3D

1. Create simple lighting designs for external Design offices/Clients and Sales representative/Sales manager. Lighting designs may include:

• request analyses (availability of all necessary input parameters, if request is in accordance with norms, suggest alternative proposals in accordance with good lighting practise)   
• lighting calculations performed within in house or external lighting software,
• luminaire specifications and descriptions
• elaboration of alternative proposals
• technical application notes (technical reports),
• drawings with luminaire disposition and all necessary details and/or visualizations.

1. Provide simple lighting calculations according to the requirements:

• inputs parameters analyses
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

1. Provide necessary support in creation of city lighting reconstruction studies:

• inputs parameters analyses (road geometry, existing lighting installation, road categorization),
• on-site data collection
• determination of typical street profiles in accordance with road geometry and lighting class
• perform lighting calculations and analyses with alternative proposals and/or competitor analyses.

Prepare street lighting categorization proposal, perform lighting calculations and analyses with alternative proposals in cooperation with direct Manager / responsible Sales rep/ Sales manager.

1. Consideration and application of the relevant lighting standards.

1. Develops, implements and/or delivers product training / presentations for Clients (e.g. Ulysse, training, ...).

1. Organize and perform on-site lighting trials and provides after-sales technical support in fine- tuning (e.g. decorative illumination).

Coordinate with the engineering team and provide detailed drawings for installation

Updating layout, panel drawings for approval and as-built submissions.

Other ad-hoc duties that may be assigned from time to time

At least 5 years working experience in the construction industry （Electrical Works )

Basic knowledge on MEP construction works

Experienced with AutoCAD software

Chinese speaking preferred

JOB DESCRIPTION:

• Hands on experience in design, implementation of Splunk architecture.
• Experience on Linux and Windows administration
• Able to do data onboarding, fields extraction according to Splunk best practices.
• Able to provide Splunk guide and Splunk operation document
• Able to setup forwarders and onboard new data sources into the environment.
• Able to troubleshoot and identify Splunk issue relating to performance and searches.
• Able to fine tune Splunk use cases (rule) and optimize searches performance.
• Able to create new dashboard to enhance the visualization of the data and create Splunk use cases for alerts/reports.
• Knowledge on index segregation and user restriction setup
• Knowledge on using Splunk Enterprise Security
• Able to do Common Informational Model for Enterprise Security.
• Good in communication and able to understand the requirements.

Performs site engineer responsibilities for

managing all aspects of the construction,

installation, maintenance, and repair of

electrical power lines, electrical systems,

fixtures, apparatus, and appliances.

This individual is responsible for planning,

scheduling, assigning, participating in, and

inspecting the works of power linesmen,

electricians, and trades helpers. The employee

also has responsibility for supervising the

operation of an electrical repair shop. Work

includes the design and construction of

special electrical apparatus and fixtures and

the preparation of specifications and

estimates for construction, repair, and

installation projects. Large scale and complex

jobs are normally inspected upon completion

for conformance with specifications; smaller

jobs are checked for satisfactory operation by

the users of the equipment. Work is

performed under general direction of an

administrative superior and is reviewed

through discussions and inspection of

completed work.

DUTIES AND RESPONSIBILITIES

Plans, assigns, schedules, and supervises the

work of power linesmen, electricians, and

helpers engaged in the construction,

installation, maintenance, and repair of university power lines, electrical systems, fixtures, apparatus, and appliances;

participates in the more difficult work.

Trains and instructs subordinates on detailed

procedures. Conducts periodic inspections and gives onsite

supervision over hazardous or unusual

work assignment is; assures availability of

equipment, materials, and supplies.

Estimates the time and material costs

required for projected jobs; keeps cost and

job records and submits reports; initiates

requisitions for supplies, tools, and

equipment. Troubleshooting of all Electrical &

ELVS PLC Knowledge preferred

Perform & Supervises the installation of all

Electrical & ELVS

Enforces safety regulations, rules, and working

conditions.

Recruits and trains personnel in the safe

operation of equipment and tools.

EDUCATION AND EXPERIENCE:-

Degree or Higher ; 4 years of related

experience including site engineer or lead

experience and considerable experience as a

Lead Site Engineer or any equivalent

combination of training and experience.

Excellent communication skills.

KNOWLEDGE, SKILLS AND ABILITIES:-

Thorough knowledge of the practices,

methods, equipment, materials, and tools of

the electrical trade.

Thorough knowledge of the occupational

hazards and safety precautions of the work.

Ability to supervise the work k of skilled

workers.

Considerable knowledge of the National

Electrical Code for electrical installations.

Ability to interpret and work from instructions,

pencilled plans and sketches, and blue prints.

Ability to communicate and coordinate with

superiors, subordinates, vendors and Ability to estimate materials and labour costs.

Skill in the use and care of all hand and shop

tools and equipment of the electrician's trade.

n the broadest sense, project managers (PMs) are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.

By overseeing complex projects from inception to completion, project managers have the potential to shape an organization’s trajectory, helping to reduce costs, maximize company efficiencies, and increase revenue.

The exact duties of a project manager will depend on their industry, organization, and the types of projects that a PM is tasked with overseeing. But across the board, all project managers share responsibilities across what’s commonly referred to as the “project life cycle,” which consists of five phases (or processes):

• Initiating
• Planning
• Executing
• Monitoring and Controlling
• Closing

• Perform preparation of design specifications
• Incorporate special features which relate to the project at hand into specifications. These include order of work, physical conditions at the site, construction work schedules, method of payment and measurement, construction procedures and special methods, and coordination with contractors and other stakeholders
• Perform technical review on specifications to ensure clarity, completeness, and exactness, and to remove restrictive descriptions so as to ensure competitive bidding
• Prepare project for advertisement by compiling contract specification into Electronic Bid Set (EBS)
• Visit proposed project site to obtain necessary information for use in creating project specification. This include condition and location of project site, location of storage and staging areas, and character and scope of work
• Provide guidance and technical advice to various persons and departments, including engineering personnel, Branch Chief, Section Chief, Engineering and Construction Department, and Architect-Engineer firms where necessary to develop basic specification procedure and policies to cover new types of projects and structures, and to make clearer various phases of the construction work
• Communicate with higher authorities on issues concerning specifications, engineering interpretations and explanations, supply of items, and items of work, and offer recommendations on reviewing specifications.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

• AUTO CAD Drafting for building & Steel Plate NESTING.
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Responsibilities

- To assist Project Manager on the day-to-day management of the site, including supervising and monitoring the site labourforce and the work of any subcontractors

- Liaising with local authorities, client's representatives, sub-contractors and consultants.

- Checking and ensuring all plans and work are as per specifications

- Resolving any technical difficulties and problem that may arise on site.

Requirements

- Degree holder in Construction/Building or related discipline.

- Minimum 2years experience from Contruction background.

- Positive personality and good team player.

- Meticulous and responsible.

- Able to multi task and work in tight schedules.

- Able to start with short notice would be an advantage,

Main duties:

• Instrumentation team profile selection.
• Instrumentation works follow-up, correcting deviations with respect to the foreseen schedule.
• Instrumentation progress reporting.
• Interface with the Client
• Identification and assessment of client requirements out of scope.
• Works assignment within the instrumentation team.
• Co-ordination with other design disciplines,scheduling, cost control, Procurement and TR project management.
• Meetings with suppliers.
• Revision and approval of all instrumentation documents.

Main requirements:

• At least 5 years of experience in the same position in oil and gas projects.
• Enforcing obedience to Safety and Environment regulations, reviewing safety and environment manuals. Ensuring operational readiness off all emergency equipment in the Contractor.
• Knowledge of drafting tools: AutoCAD, uStation
• Experience in Fieldbus design
• Experience in DCS/ESD/F&G specifications.
• Knowledge of Process design.
• Knowledge of up-to-date instrumentation technologies and suppliers
• Proven experience in detail engineering of industrial plants.
• Intools expert user.
• Experience and understanding the EHS requirements

Working Place: Jurong Island

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

Work closely with project managers and stakeholders to coordinate project resources and information, ensuring that the project requirements are met. As a Project Engineer (PE) you will be responsible for working across multiple teams while executing project plans and revising as appropriate to meet changing needs and requirements.

Project Tasks

• Discipline in detailed documentation and reporting of projects plan, project status and issue logs.
• Identify and schedules customer-facing meetings to assure effective completion of projects Manages day-to-day operational aspects of a project schedule.
• To assist in install, setup, testing and provide technical support for the product installation team.
• Monitoring compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Review technical documentation of projects and implementations as well as service deliverables.
• Manage customer relations by fostering productive and effective relationships with business users.
• Timely escalation of critical situations and any likely project risk that can impact project delivery scheduled to Manager.
• Effectively and accurately set client expectations and deliverables.
• Write documents describing functional specifications, protocols, test cases and maintenance guidelines for medical equipment.
• Keep documentation of implementation on all medical equipment.

Requirements

• At least 4 years of experience working in the IT industry, preferably involved in project delivery adopting SDL
• Familiar with Networking, Microsoft Operating System and SQL Server
• Relevant experience or interest in project management will be highly advantageous
• Excellent communication skills (both written and verbal) and interpersonal skills
• Great attention to details and results-oriented
• Ability to influence and present to the leadership team
• Committed to the values of integrity, accountability, transparency, scientific rigor and drive
• Good verbal and written communication skills

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Job Description & Requirements

· Responsible for planning and monitoring schedule for all projects

· Work closely with drafters and perform quality check of all drawings before production on site.

· Ensure the execution of works, products and services are in accordance with the customers’ requirements, drawings and specifications, etc and direct the carrying out of remedial measures to any non-conformances immediately upon discovery.

· Liaise with Project teams, authorities, client, architects and various contractors to ensure project work is carried out smoothly.

· Conduct periodic inspection of structural works.

Requirements:

· Degree in Civil/Structural Engineering recognized by P.E. Board

· Min. 3 years relevant experience in building and construction related field

· Able to work independently and in a team

Do you have a strong passion for writing good, maintainable and robust code? Join us and be part of the family that believes in good software design, delivering quality well tested solutions. Help establish Ufinity as the trusted partner by constantly achieving a pinnacle of excellence in our ideas, solutions and services.

As a Software Engineer with Ufinity, you will have the opportunity to deliver a quality solution to our clients. Your broad responsibilities include:

• Software design and Agile software development
• Testing and ensuring quality in the development lifecycle
• Support the software in the production environment

Role Requirements:

• Possess at least a Bachelor’s Degree, Post Graduate Diploma, of Professional Degree in Computer Science / Information Technology, Engineering (Computer / Telecommunication)
• Fresh graduates are welcome to apply.

Required skills:

• Java, Spring, Spring Boot
• HTML, CSS, Javascript
• Unit/Integration tests
• SQL (MySQL)
• Proficiency in javascript (ES2015 and above)
• Spring Batch
• Excellent communication and collaboration skills

Good to have: React, Vue.js