Position Overview:

The Principal Electronics Engineer is a senior leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g., software, mechanical, electronics, system, testing, project etc) to assure and advise on the development and/or delivery of products. The Principal Electronics Engineer possess deep technical and industry knowledge with the ability to influence and guide company direction, ensuring strategic alignment. The Principal Electronics Engineer is also responsible for developing products and designs that support the product development and product goals of EOS DS.

The Principal Electronics Engineer will lead and mentor engineers, up to and including Senior Engineers. They may provide technical assistance to multiple teams and provide a high level of support to those teams. In consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

The Principal Electronics Engineer will have extensive engineering experience across the product lifecycle in a Defence environment, allowing them to provide leadership across engineering teams and execute technical authority as allocated.

Primary Duties:

Specific Functions & Tasks

• Provide necessary guidance and direction to produce electronics designs and analysis that satisfy defined product development requirements in the specified time frames and exercise allocated technical authority.
• Work with systems engineers to ensure all requirements are identified, captured and analysed.
• Lead conceptual design and schematic capture of complex electronic circuits.
• Ensure test and evaluation activities on electronics and system designs are undertaken to verify and sign-off of all design requirements.
• Initiate and/or participate in planning on electronics designs.
• Develop, review and champion the electronics engineering process within EOS DS.
• Ensure the preparation and review of all documentation to support designs.
• Perform conceptual, preliminary and detailed design of complex electronics assemblies.
• Simulate analogue and digital circuits.
• Document designs including calculations, design options and decisions.
• Prepare for and contribute to design reviews.
• Perform test, evaluation, characterisation, verification & validation of electronic subsystems in collaboration with test engineers.
• Prototype electronic circuits, wiring harnesses and other systems.
• Work closely with other engineering disciplines to ensure cohesive and complete electronic designs are delivered on time and on budget and meet project requirements.
• Apply DFx principles (manufacturability, testability, excellence).
• Review work and provide guidance and mentorship to Senior Electronics Engineers.
• Engage key stakeholders and subject matter experts across technical engineering and specialty areas to understand the concept of operations and user needs to elicit and decompose electrical requirements.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and influence strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and ensure a high level of leadership and deep industry, defence system knowledge and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence persuasively through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation, and verification activities on integrated system designs and prototypes to verify and provide recommendations for sign-off of all design/product requirements to the Chief Engineer and Design Authorities based on relevant legislative requirements, standards, and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Engineer.
• Support the leadership alongside with the EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide thorough engineering judgement for progress and the advancement of engineering solutions.
• Apply interdisciplinary, collaborative approach to requirements including analysis of functional and non-functional requirements and functional performance specifications to develop effective solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Engineer and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions.

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder
• Uses experience for sound judgement

Job Scope:

• Perform routine maintenance and troubleshooting of chiller systems to ensure optimal performance and efficiency.
• Provide exceptional customer service by addressing client inquiries and concerns regarding chiller operations and maintenance.
• Diagnose mechanical, electrical, and control system issues and implement effective solutions.
• Educate clients on proper operation and maintenance practices to extend the lifespan of their chiller systems.
• Prepare and submit detailed reports outlining service activities, findings, and recommendations for future improvements.
• Execute commissioning processes for new chiller installations, ensuring systems are installed correctly and functioning as designed.
• Other ad hoc duties assigned

Job Requirement:

• Min Diploma / Degree in Engineering
• Min 2 Years experience in chiller maintenance, commissioning, or related HVAC roles

All interested applicants, please send in your resume to: [email protected]

Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

About the Client:

Our client is a leading telecommunications company renowned for innovation, excellence, and a commitment to delivering superior connectivity solutions.

Responsibilities:

Manage integration services to ensure accurate configurations, seamless migrations, and optimized customer value within 12 months.

• Define integration strategies aligned with contracts to ensure customer value delivery.
• Prepare and validate configurations, scripts, and test cases for accurate execution.
• Perform troubleshooting, corrective actions, or escalate issues to ensure delivery quality.
• Execute integration and migration tasks per process frameworks and contractual terms.
• Drive process improvements for greater efficiency and higher-quality integration activities.

We are looking for a detail-oriented professional with a proven track record in network integration or migration projects.

Skills/Requirement:

• Strong experience in integration, migration, and testing processes within telecom environments.
• Proficiency in using tools like PCI, NeoLoad, NetAct, NetCracker, JIRA, Trello, TestRail and HP Quality Centre.
• Demonstrated ability to analyze, configure, and validate scripts with a high degree of accuracy.
• Exceptional troubleshooting skills and a proven ability to handle escalations effectively.
• Team management experience with a focus on mentoring and process enhancements.

Join a team where your skills will drive innovation and success. Apply now to become an integral part of this exciting journey!

To Apply: Apply online now or contact me to discuss this new opportunity at [email protected]

We regret to inform you that only shortlisted candidates will be contacted.

PERSOLKELLY Singapore Pte Ltd • EA License No.01C4394 • EA Registration No. R1330844 (Naveen Vasudevan)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

**********************************

Looking to expand your expertise to IT and Technology?

Captain's Eye Asia is looking to hire a junior IT - no prior knowledge required!

As an IT technician you will configure systems in the office and test it before delivery to the client.

We will supply full onboarding and training.

Captain's Eye has developed an amazing AI system for the maritime industry

• Company: Manufacture and Sales of Industrial Automation Equipment (Japanese Organization)
• Location: Mattar (Nearest MRT Station)
• Position: Senior Sales Engineer (Job ID: 19206)

Job Description:

• Manage and oversee the entire sales cycle, including customer meetings, quotation submission, sales order processing, and delivery follow-up.
• Provide advanced technical solutions and support to customers.
• Prospect and develop new accounts while maintaining and expanding relationships with existing accounts.
• Develop and implement strategies to achieve the company’s overall sales and marketing objectives.
• Mentor and guide junior sales engineers, providing training and/or support as needed.
• Collaborate with cross-functional teams to ensure customer satisfaction and address any technical or logistical challenges.
• Analyze market trends and customer feedback to identify opportunities for product and service improvements.

Job Requirements:

• Diploma or Degree in Mechanical, Mechatronics, Electrical, Electronics, or a related field.
• Possess own car (Car allowance provided)
• Minimum of 3 years of sales experience, with a proven track record in a technical sales role.
• Strong problem-solving skills and the ability to handle challenging customer situations
• Experience in a senior sales or sales engineering role within factory automation and/or semiconductor will be an advantage.

Interested applicants please apply directly for further shortlisting review.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Jeffrey Koh Kok Ann

EA Registration No: R1770345

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246

EA License No:90C4069

Responsibilities

• Collaborate with cross-functional teams, including, electrical engineers, mechanical engineers, designers, programmers, suppliers, and stakeholders, to plan, execute, and deliver engineering projects focused on green marine systems for marine vessels within defined timelines and budgets.
• Together with core technical teams, conduct feasibility studies, evaluate technical requirements, and develop project specifications and scopes of work for green marine system integration projects.
• Coordinate and oversee engineering activities throughout the project lifecycle, ensuring adherence to project plans, standards, and regulatory requirements.
• Together with technical team, review and interpret technical drawings, schematics, and specifications to ensure accurate implementation of green marine system designs and compliance with industry standards and regulations.
• Conduct risk assessments and develop mitigation strategies to ensure the safety, efficiency, and reliability of green marine system projects.
• Monitor project progress, identify potential issues or bottlenecks, and implement corrective actions to ensure project milestones and deliverables are met.
• Manage project budgets, track expenses, and provide regular cost reports to stakeholders.
• Coordinate and track procurement activities for green marine system components.
• Collaborate with the procurement team to ensure timely delivery of materials, equipment, and services required for green marine system projects.
• Conduct regular site visits and inspections to monitor installation and integration activities, resolve technical issues, and ensure compliance with project specifications.
• Prepare and deliver project progress reports, presentations, and technical documentation to stakeholders and senior management.
• Manage delivery of documentations, including but not limited to FAT, HAT, SAT, operational and maintenance manuals.

Requirements

• Bachelor’s degree in Marine Engineering, Mechanical Engineering, Electrical Engineering, or a related field.
• Proven experience as a Project Engineer, Marine Superintendent or similar role in the marine, shipbuilding or relevant industry, with a strong track record of successfully delivering engineering projects.
• Knowledge of marine vessels systems, including electric motors, generators, batteries, power management systems, and control systems is an advantage.
• Familiarity with marine vessel propulsion systems, including diesel engines, gas turbines, and electric propulsion technologies.
• Proficiency in using engineering software and tools, such as AutoCAD, SolidWorks, and project management software.
• Strong project management skills, with the ability to plan, prioritize tasks, manage deadlines, and adapt to changing project requirements.
• Excellent analytical and problem-solving abilities, with a keen attention to detail.
• Effective communication and interpersonal skills, with the ability to collaborate with cross-functional teams and stakeholders.
• Strong leadership skills, with the ability to motivate and guide project teams.
• Knowledge of procurement processes and experience in managing supplier relationships.
• Familiarity with industry safety standards and practices, and ship classification society requirements for marine vessels.
• Ability to travel to project sites and work in outdoor or shipyard environments as needed.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

Job Requirements:

• Degree in Information Technology or equivalent.
• Must have minimum 7-10 years of experience in System Administration.
• Must have minimum 5-7 years of experience in DevOps Engineering.
• Must have experience in AWS services including deployment and management of Cloud Infrastructure.
• Must have strong understanding of Linux server administration, with scripting proficiency in Bash.
• Must have experience maintaining efficient and developer-friendly CI/CD workflows, and optimizing build times.
• Experience in Infrastructure-as-Code (IaC) tools (e.g. Terraform, CloudFormation) for provisioning and managing cloud infrastructure.
• Must have solid knowledge of virtualization and networking concepts, including firewalls, DNS, and load balancers.
• Experience in Monitoring and Analytics with tools like Prometheus, Grafana, and ELK/Opensearch/Elasticsearch for monitoring, logging, and visualization.
• Experience in Containerization Technologies like Docker and Kubernetes
• Good to have hands-on experience in OpenShift.
• Excellent written and verbal communications skills

• Technically sound with at least 5 years of hands-on experience in Java, J2EE/JEE, Oracle, SQL/ PLSQL, Jasper report, APIs (RESTful and SOAP) and/or XML. Basic understanding of Solaris and/or Linux OS such as RHEL would be required.
• Having Unix shell scripting, RedHat Ansible knowledge, experience in AWS applications (CloudWatch, S3, RDS, EKS), IBM Connect Direct, IBM MQ, API Gateway, Apache Ignite, Solace PubSub+, ELK, micro services & containers, cloud-based architecture and/or DevSecOps technologies is a plus.
• Experience in Spring 4.x / 5.x / 6.x and Struts 2.x frameworks, SpringBoot and/or SpringBatch would be added advantage.
• Domain knowledge of Financial Clearing and Payment Systems and ISO20022 standard is a plus.

Location: Changi, Singapore

Roles & Responsibilities:

• Work closely with the project manager to design and implement control systems for various automation projects.

• Responsible for modifying and updating control designs, documents, and systems according to URS and industry standards.

• Participate in internal testing and validation operations such as FAT, SAT, and system debugging.

• Provide support throughout the project lifecycle, ensuring smooth execution and high-quality standards.

Requirements:

• Diploma in Engineering or equivalent qualification.

• Minimum 5 years of hands-on experience in control systems design.

• Experience in Mitsubishi, Schneider, and Siemens S7 programming.

• Familiarity with SCADA systems such as Ifix, Ignition, and GENESIS.

• Strong communication skills to work effectively with project teams and clients.

• Working experience in PUB

Working Hours:

• Monday to Friday, 8 AM to 6 PM

Responsibilities:-

• Ensure precast produced in accordance to shop drawings
• Update of precast production status
• Carry out checks between precast plants
• Ensure precast quality in accordance to specifications

Requirement

• Minimum 2-3 years’ experience in precast management as a supervisor /
• engineer
• Able to work independently with minimal supervision
• Applicants with Precast Concrete Construction Course certification will have an
• advantage

Job Description

• Undertake detailed design in one or more of the following field of expertise: Civil (drainage, sewage), Bridge/Tunnel, Underground Excavation and Tunnelling works
• Execution of projects and liaison with the Client, Client’s Consultants, Contractor, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Analysis on structural components using various engineering software

Requirements

• Degree in Civil and Structural Engineering or its equivalent
• Prefer degree recognized by the Professional Engineers Board of Singapore for Associate level
• Minimum 5 years relevant experience
• Good exposure in the analysis and design of geotechnical works, concrete structures, steel structures, civil works, or soil-structure interactions
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Job Responsibilities:

• Develop Low-Power Design Workflows:
  Own the design process to minimize power consumption while ensuring performance and reliability using advanced tools and techniques.
• Full-Chip Floor Planning and Routing:
  Lead floor planning and place-and-route efforts to optimize chip area and meet performance, area, and power goals.
• Power Network Design:
  Create and analyze robust power networks to ensure performance, minimize losses, and support low-power goals.
• Timing Closure and Signoff:
  Collaborate with teams to resolve timing issues and manage power and signal integrity for design verification.
• Physical Verification (DRC and LVS):
  Ensure compliance with layout and manufacturing rules through DRC and LVS for a tape-out-ready design.
• Cross-Team Collaboration:
  Work with engineers across functions to align designs with chip architecture and solve design challenges.
• Continuous Improvement:
  Stay updated on design advancements and improve workflows for better efficiency and low-power optimization.

Requirements:

• Educational Background:
  Bachelor’s degree or higher in Electronics, Computer Science, Electrical Engineering, or a related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience:
  Minimum X years in physical design with a focus on high-performance, low-power designs. Must have tape-out experience and familiarity with advanced semiconductor technologies (12nm and below).
• Technical Expertise:
  Proficient in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Strong knowledge of power network design, IR drop analysis, and timing closure with static timing analysis (STA) tools like PrimeTime.
• Software Knowledge:
  Experience with tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Experience:
  Hands-on expertise in place-and-route methodologies for optimizing performance, power, and area.
• Soft Skills:
  Excellent communication and collaboration skills to work effectively in multidisciplinary teams. Strong problem-solving and critical thinking abilities to address design challenges.
• Preferred Skills:
  Experience with advanced low-power techniques, deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, and design-for-manufacturing (DFM) principles.

Our client is from Semiconductor industry. They are now recruiting a Process Development Engineer to be part of their Engineer team to assist their team for the next phase of their business. They are located in the North - easily accessible.

Roles and Responsibilities:

• Conduct internal audits to ensure production processes align with ISO 45001 standards.
• Ensure all process documentation is accurate and up-to-date.
• Support the organization in achieving ISO 45001 recertification with zero findings.

Requirements:

• Degree in Engineering or related field.
• Min 3 years of experience in semiconductor or related industry
• Experience in Design for Manufacturing (DFM) / Design for Assembly (DFA) is a bonus

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R23118456
• EA Personnel Name: Law Yi Xin

Responsibilities:

• Responsible for the mechanical design and development of electronic automation equipment.
• Design and review projects to meet customer requirements.
• Work with Production department to optimize design to minimize error.

Requirements:

• Min. Diploma in Mechanical or Mechatronic Engineering
• 2 to 10 years experience in electronic automation equipment design
• Proficient in Solidworks software
• Knowledge of Pro Engineer software will be an added advantage

Interested applicants, please send in your detailed resume including your current & previous working experiences as well as current and expected salary to [email protected]

We regret that only shortlisted candidates will be notified.

• Supply Chain Management / Procurement Exp
• Maintenance Industry / Electrical Spare Parts Exp
• Degree in Supply Chain / Business

Job Scope:

• Responsible for sourcing for direct / indirect materials, dealing with vendors and negotiating for the best price and payment term from local / overseas vendors
• Collaborate and maintain good working relationship with stakeholders and vendors, for planning and initiation of necessary procurement
• Liaison with vendors for timely delivery and monitor all purchases to avoid any shortages, overcharges and defects of materials
• Resolve supply, quality, service and invoicing issues with stakeholders, vendors and identify process bottleneck, propose and implement solutions to resolve issues in a timely manner
• Assist to implement internal procurement strategies
• Prepare, develop and review department contracts for new and existing supplier, and constantly monitoring the validity and expiry of each contract
• Prepare and develop various documentations (e.g. Tender, SOPs, Work Instruction, Reports, etc.) and monitor the validity & expiry of each documentation
• Assist as the System Administrator for section’s Maintenance Management System (MMS)
• Monitor and track Asset Life Cycle for planning of asset renewal and/or disposal
• Support Budgetary Planning and Costing
• Any other duties as assigned

Requirements:

• Possess a Degree in Business Admin / Supply Chain is preferred
• Possess 1 – 3 years of relevant working experience in Asset Management / Supply Chain Management / Procurement
• No experience are welcome and training will be provided
• Prior experience from equipment maintenance industry or with experience in electrical spare parts is advantageous
• Hands-on experience on Enterprise Resource Planning (ERP) Systems (e.g. ServiceNow, SAP, Maximo, Oracle) is advantageous
• Able to work well independently and in a team under a challenging and fast-paced environment

To apply please click on the APPLY NOW button or email your resume with the following details inside your resume for faster processing:

• Reason for leaving each past & current employment

• Salary drawn for each past & current employment

• Expected Salary

• Earliest availability date

We regret only shortlisted candidates will be notified. By submitting any application or résumé to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Yoong Poh Feng

EA License | 14C7092

EA Registration Number | R1105076

Job Summary:
We are seeking an experienced OpenShift Resident Engineer with a strong background in OpenShift Container Platform (OCP). The ideal candidate will have a minimum of 3-4 years of relevant experience, including at least 1 year managing and optimizing OpenShift environments. This role involves designing, implementing, and maintaining OpenShift platforms, ensuring the high availability, scalability, and security of containerized applications.

Key Responsibilities:

• OpenShift Platform Management:
  Design, deploy, and maintain OpenShift environments in line with industry standards and business objectives.
• Troubleshooting & Support:
  Diagnose and resolve platform issues while ensuring minimal downtime.
• Collaboration & Optimization:
  Work closely with development and operations teams to enhance containerized application performance.
• CI/CD Implementation:
  Develop and maintain continuous integration and delivery (CI/CD) pipelines.
• Security & Compliance:
  Ensure platform security, compliance, and best practices are followed.
• Documentation & Reporting:
  Maintain detailed documentation of platform configurations, processes, and procedures.

Essential Qualifications:

• Experience:
  Minimum of 3-4 years working with OpenShift Container Platform.
  At least 1 year managing OpenShift environments.
• Technical Skills:
  Proficiency in containerization technologies such as Kubernetes and Docker.
  Hands-on experience with CI/CD tools (e.g., Jenkins, GitLab CI/CD).
  Strong troubleshooting and problem-solving skills.
• Soft Skills:
  Excellent communication and collaboration skills.
  Ability to work in a fast-paced, team-oriented environment.

Desirable Qualifications:

• Certifications:
  OpenShift certification or other related credentials.
• Cloud & Automation Tools:
  Experience with cloud platforms like AWS, Azure, or GCP.
  Familiarity with Infrastructure-as-Code (IaC) tools such as Terraform and Ansible.

• Work closely with project team to assist Quality and Validation Manager Asia region to the tasks on schedule and within quality standard compliance.
• Responsible completion of the Quality, Cost, and Time validation functions for customer projects.
• Create and maintain qualification/validation documentation for mechanical, software, and hardware components from the design phase of projects.
• Oversee the qualification and validation processes for projects in conducting risk analysis, protocol drafting, and test implementation during FAT & SAT process internally and partners’ sites.

Requirements:

• Diploma in Mechanical Engineering or equivalent
• At least 2 years of quality and validation of automated systems experience.
• Proficient in MS Office (Excel, Word and PowerPoint).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Visa’s Technology Organization is a community of problem solvers and innovators reshaping the future of commerce.   We operate the world’s most sophisticated processing networks capable of handling more than 65k secure transactions a second across 80M merchants, 15k Financial Institutions, and billions of everyday people.   While working with us you’ll get to work on complex distributed systems and solve massive scale problems centered on new payment flows, business and data solutions, cyber security, and B2C platforms.     

The Opportunity: 

We are looking for Versatile, curious, and energetic Software Engineers who embrace solving complex challenges on a global scale.  As a Visa Software Engineer, you will be an integral part of a multi-functional development team inventing, designing, building, and testing software products that reach a truly global customer base. While building components of powerful payment technology, you will get to see your efforts shaping the digital future of monetary transactions.   

The Work itself: 

• Design code and systems that touch 40% of the world population while influencing Visa’s internal standards for scalability, security, and reusability 
• Collaborate multi-functionally to create design artifacts and develop best-in-class software solutions for multiple Visa technical offerings 
• Actively contribute to product quality improvements, valuable service technology, and new business flows in diverse agile squads 
• Develop robust and scalable products intended for a myriad of customers including end-user merchants, b2b, and business to government solutions. 
• Leverage innovative technologies to build the next generation of Payment Services, Transaction Platforms, Real-Time Payments, and Buy Now Pay Later Technology 
• Opportunities to make a difference on a global or local scale through mentorship and continued learning opportunities 

Essential Functions:

• Demonstrates relevant technical working knowledge to understand requirements.
• Identifies and contributes to the development and solution strategies to team members that improve the design and functionality of interface features across one or more project features, under minimal guidance.
• Applies standard processes on the use of programming languages (e.g. HTML, C++, Java) to write code that fulfills website modification requests and technical requirements. 
• Collaborates with others to support the piloting of new technology capabilities and features that enhance the user website experience across e-commerce products.
• Analyzes bugs for simple issues and applies debugging tools to verify assumptions.

The Skills You Bring:

• Energy and Experience: A growth mindset that is curious and passionate about technologies and enjoys challenging projects on a global scale
• Challenge the Status Quo: Comfort in pushing the boundaries, ‘hacking’ beyond traditional solutions
• Language Expertise: Expertise in one or more general development languages (e.g., Java, C#, C++)
• Builder: Experience building and deploying modern services and web applications with quality and scalability
• Learner: Constant drive to learn new technologies such as Angular, React, Kubernetes, Docker, etc.
• Partnership: Experience collaborating with Product, Test, Dev-ops, and Agile/Scrum teams

**We do not expect that any single candidate would fulfill all of these characteristics. For instance, we have exciting team members who are really focused on building scalable systems but didn’t work with payments technology or web applications before joining Visa

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs. 

Job Description:

• Carry out installation and commissioning of air compressors and related systems at customer sites.
• Perform scheduled preventative maintenance (PM) on air compressor systems.
• Diagnose and resolve mechanical, electrical, and pneumatic issues in air compressor systems.
• Provide technical advice to clients on the proper use and maintenance of air compressor systems if necessary.
• Produce timely and detailed service reports.
• Maintain an inventory of parts, tools, and equipment required for on-site repairs.

Job Requirement:

• Good interpersonal and communication skill
• Possess valid class 3 license
• Willing to travel on site aif needed
• Must have hands on experience in servicing air compressor

AngelineMah
Reg No: R2096146
One Vogue Pte Ltd
EA License: 19C9629

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Information :

Working Hours : Mon~Fri 8:15am to 5:45pm

*Might required to work onboard the vessel and travel occasionally.*

Responsibilities :

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Requirements :

1. 2 years QA Experience in Marine or Industrial

2. Diploma in Electrical Engineering or ITE with relevant experiences

3. Able to speak Chinese

4. Required to work onboard the vessel and travel occasionally.

Interested candidate can send in your resume in Microsoft Words, along with a picture of yourself to :

[email protected]

We regret to inform that only shortlisted candidates will be notified.

Thank you for applying.

Carol Tan

EA License No.: 23C1894

EA Personnel No.: R24121972

Key Responsibilities:

• Installation, corrective maintenance, and fault finding of all equipment and systems carried out by the company.
• Attending to service calls, developing sales of security systems and equipment, quoting, and securing projects.
• Coordinating and assisting with projects secured by the company.
• Performing any other work assigned by the management consistent with the company's objectives.
• Maintain effective communication with client (local and overseas) in order to track and report the project status.
• Working in a heavy industries environment that is dirty and greasy can be a physically demanding such as Manual Labor e.g. Lifting heavy materials, working with tools, or operating machinery requires strength and stamina.
• You will be working in Confined Spaces and may need to navigate tight spaces, such as inside machinery or construction areas.
• You are require to stand the exposure to harsh Conditions which deal with extreme temperatures, grease, oil, dust, or other environmental factors that make the job physically taxing.
• You are able Climbing, Bending, or Crawling as this roles require physically demanding positions as part of the daily responsibilities.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Assist in the design, development, and implementation of physical security systems, including access control, CCTV, and intrusion detection systems, for industrial facilities
• Ensure designs adhere to security-by-design principles and industry standards
• Conduct site assessments to identify security risks and recommend appropriate solutions
• Collaborate with cross-functional teams, including but not limited to clients and site team to ensure seamless integration of security systems
• Prepare technical documentation and reports as required
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s degree in Electrical Engineering or a related field
• Minimum 3 years of experience in electrical engineering with a focus on physical security systems in industrial plants or similar settings
• Knowledge of security-by-design principles and best practices
• Familiarity with industry standards for security systems (e.g., ISO 27001, UL 294)
• Strong problem-solving skills and attention to detail
• Excellent communication and teamwork abilities

Product Engineer (Vision Department)
5 days
9am-6pm
Kallang
$4000-$5000

Responsibilities:

• Assist in component selection, engineering evaluation and testing of parts and sub-modules for vision inspection equipment
• Design of electrical parts and sub-modules for vision inspection equipment
• Maintain product design documents, drawing and BOM
• Works and manage suppliers to ensure all design requirements are met
• Provide troubleshooting expertise
• Planning/Coordination of releasing new designs to manufacturing

Requirements:

• Diploma/Degree in Engineering specializing in electrical/electronics
• familiar with CAD software for electrical and schematic design
• Familiar with PC hardware, Windows OS and Software
• Familiar with PCB/PCBA design/fabricate/test process is an added advantage
• Analytical with good troubleshooting skills

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

Responsibilities:

• Contribute to all phases of the software development life cycle, focusing on delivering innovative solutions.
• Collaborate with global teams and work independently on architecture, design, development, testing, and support.
• Interact with stakeholders to gather and document requirements, define user stories, and provide effort estimates.
• Build and integrate software products, test interfaces, and manage version control.
• Evaluate and recommend technologies to align with product and platform goals.
• Adhere to best practices in design and development and participate in code reviews.
• Break down features into development tasks, prioritize workloads, and address ad-hoc requests.

Qualifications:

• Bachelor’s degree in Computer Science or related field with 8+ years of software development experience.
• Strong knowledge of Data Structures, Algorithms, and Design Patterns.
• 3+ years of full-stack development experience with Java, Spring, JPA/Hibernate, and microservices.
• 6+ years of experience with test automation tools like Karate and Cypress.
• Familiarity with secure coding practices, including NexusIQ, SonarQube, DAST, and penetration testing.
• Experience with databases (Postgres, Oracle, Redis), cloud platforms (AWS, Azure, GCP), and container technologies (Docker).
• Nice to have: 2+ years of experience with JavaScript, ReactJS, and HTML5/CSS3.

EA License: R1873481

Company EA License: 11C4879