· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description:

• Perform structural analyses for fixed and floating offshore structures, including global and local assessments.
• Design and optimize marine and offshore structures to meet project requirements and industry standards.
• Prepare structural design specifications, drawings, and technical documentation for fabrication and construction.
• Conduct finite element analysis for load-bearing structures, considering factors such as fatigue, buckling, and impact.
• Assist in the preparation of technical reports, including global analysis, fatigue life evaluation, and strength assessments.
• Assist in the preparation of technical reports, including global analysis, fatigue life evaluation, and strength assessments.
• Collaborate with multidisciplinary teams, including naval architects, mechanical engineers, and project managers.
• Provide support during fabrication, installation, and commissioning phases to ensure structural integrity.
• Coordinate with clients, classification societies, and third-party reviewers to obtain design approvals.

Requirements:

• Bachelor’s degree in Marine Engineering, Structural Engineering, or a related field.
• Minimum of 5 years of experience in structural engineering, preferably in marine & offshore projects.
• Proficiency in structural analysis software such as SACS, SESAM, or equivalent.
• Strong understanding of structural design principles, finite element analysis, and material behaviour.
• Knowledge of industry standards and codes, including AISC, API, ISO, DNV, or other relevant guidelines.
• Excellent problem-solving skills with attention to detail and accuracy in calculations.
• Strong communication and interpersonal skills for working in a multidisciplinary team environment.
• Ability to prepare clear and concise technical reports and documentation.

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

• Reports to the Design Manager
• Review/Develop design drawings and documents in accordance with project requirements
• Coordinate all design related matters and participate in regular/ad-hoc meetings with Clients / Design consultants / Viaduct specialists / Subcontractor
• Monitor and update design schedule regularly
• Prepare & review shop/fabrication drawings for temporary/viaduct structure
• Support Design manager & lead in-house design engineer/drafter

Job Requirements

• Minimum Degree in Civil Engineering or equivalent
• Minimum 3 years of relevant experience of design & construction of bridge/ viaducts/ roads/ highways
• Candidate with experience in LTA (Road/MRT/Viaduct) is preferred
• Technical expertise and knowledge of concrete material & structure design
• Proficient in proposal for structural systems
• Proficient in AutoCAD
• Proficient in Structural Analysis Software (MIDAS, SAP, STAAD etc.)
• Good attitude towards work and timeline
• Independent, analytical and good interpersonal skills
• Location : Woodlands
• Project : Viaducts

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice

JOB DESCRIPTION

Job Title

Civil and Structural Engineer

Occupation

Building Construction Engineer

Job Description & Requirements

Roles & Responsibilities

Job Descriptions:

• Perform Civil/Structure engineering design works
• Analysis on structural components with engineering software
• Determine best materials and methods with Professional Engineers
• Liaise with Architects on design and safety of structure
• Prepare drawings, specifications and computer models of structure
• Liaise with Clients, Consultants and Authorities for management of project
• Responsible for on-site technical / engineering / administrative matters
• Involve in project planning, implementation and close monitoring of projects
• Ad-hoc duties as assigned by the Senior Engineer

Requirements:

• Candidate must possess at least Degree in Civil/Structural Engineering (degree recognized by PE Board preferable)
• Minimum 1 years’ relevant experience requried; non entry level candidate is desired
• Required Skill(s): Good communication and interpersonal skills, ability to liaise with all levels of people
• Relevant experience in design of Buildings, Civil and Infrastructure works
• Preferably with project site co-ordination experience
• Familiar with local laws, design codes and submission requirements is advatangeous
• Knowledge of engineering software and MS Office
• Proficient in AUTOCAD and Civil and Structural Engineering software applications
• Entry Level candidates are encouraged to apply

Please indicate reason for leaving each employment and expected salary in your CV.

Salary package shall depends on candidates' working experiences and qualifications.

Job Description

To follow and understand works as per approved procedures, project specification and drawings for structural components for shop fabrication as per construction sequence and schedule.

To ensure compliance to HSE regulations and requirement.

To supervise the relevant sub-contractors to ensure the major output within the stipulated schedule without scarifying the HSE & Quality requirements.

• To prepare constructability slide and co-ordinate with other discipline about construction sequence•
• To conduct the daily tool box briefing with subcontractors to comply the project requirements.
• To coordinate the subcontractor's supervisor regarding daily man power allocation and schedule the activities
• To ensure all the workers follow our HSE policies and requirement.
• To attend the PSCC meeting and coordinate incompatible activities without any HSE issues and apply necessary Permits (PTW) and ensure the PTW is approved before commencement of works.
• To check all the activities to be done with proper Risk assessment and method statement and briefed all the workers involved in the job.
• To raise the NSI request forms for Project and temporary materials whichever not captured by EDD.
• To raise the E12 to EDD if required for any technical issues at site activities.
• To co-ordinate with EDD engineers / Clients for the shop /site related construction activities.
• To participate weekly PMT Meeting & sub-contractor meeting to meet the weekly and monthly progress as per planned schedule.
• To monitor the sub-contractor QC's checks and NDT checks shall happen as per project specification.
• To conduct internal audit and ensure the subcontractor's documents are latest.
• To send the progress status to Project engineer weekly or send to planning department for the Progress.
• To ensure all shop fabricated items shall be followed by release note system.
• To ensure the display board with relevant & latest WPS at all time in the Shop or Erection sites.
• To Ensure electrode store equipment's that all are calibrated/ monitor and supervise of the electrode store man / monitor and keep a record of daily consumables of electrodes / FCAW wires / SAW wires / Gouging carbons & sufficient available stock.
• To monitor gas consumption and notify to stores department to raise NsI as and when required.
• To attend Toolbox meeting in time particularly in the weekend and nightshift and hand over the activities with return forms.
• To Monitor the day shift and night shift Progress and allocate the jobs under his subordinates.

Job Requirements

• 5 -7 years of experience
• Good computer knowledge
• Day & Night shift with extendable working hours
• Good experience in EPC Projects for Oil & Gas, offshore Renewables & System

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Summary:

The Design Executive reports to the Project Manager and is responsible for creating, interfacing and facilitating design drawings throughout projects' life cycles based on contract drawings and latest information as well as facilitate the flow of information between the design team and project team.

Job Description:

• Prepare, manage and facilitate design drawings using BIM and CAD technologies for building construction
• Take charge of all coordination works of structural and architectural interface with main contractor(s) and other trades for cross-team support
• Ensure all models are compatible and BIM data are made available to all project participants
• Collaborate within design team and other relevant departments to ensure all drawings are in order as per design requirements
• Manage design changes and revisions, resolve discrepancies and queries between design and project teams
• Attend site meetings as required
• Any other tasks as may be assigned from time to time

Job Requirements:

• Diploma/Degree in Architectural/Civil/Structural Engineering or equivalent
• Minimum 5 years of related work experience in similar capacity for construction and architecture projects
• Proficient in MS Office, Tekla, Revit, Navisworks and AutoCAD software
• Knowledge of DGN, DWF, IFC and MicroStation
• Knowledge of native formats of BIM authoring or BIM related applications for design reviews
• Fluent in English with good interpersonal skills
• Strong project management and decision-making skills

JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• To prepare constructability slide and co-ordinate with other discipline about construction sequence
• To conduct the daily tool box briefing with subcontractors to comply the project requirements.
• To coordinate the subcontractor's supervisor regarding daily man power allocation and schedule the activities
• To ensure all the workeis follow our HSE policies and requirement.
• To attend the PSCC meeting and coordinate incompatible activities without any HSE issues and apply necessary Permits (PTW) and ensure the PTW is approved before commencement of works.
• To check all the activities to be done with proper Risk assessment and method statement and briefed all the workers involved in the job.
• To raise the NSI request forms for Project and temporary materials whichever not captured by EDD.
  To raise the E12 to EDD if required for any technical issues at site activities.
• To co-ordinate with EDD engineers / Clients for the shop /site related construction activities.
• To participate weekly PMT Meeting & sub-contractor meeting to meet the weekly and monthly progress as per planned schedule.
• To monitor the sub-contractor QC's checks and NDT checks shall happen as per project specification.
• To conduct internal audit and ensure the subcontractor's documents are latest.
• To send the progress status to Project engineer weekly or send to planning department for the Progress.
• To ensure all shop fabricated items shall be followed by release note system.
  To ensure the display board with relevant & latest WPS at all time in the Shop or Erection sites.
• To Ensure electrode store equipment's that all are calibrated/ monitor and supervise of the electrode store man / monitor and keep a record of daily consumables of electrodes / FCAW wires / SAW wires / Gouging carbons & sufficient available stock.
• To monitor gas consumption and notify to stores department to raise Nsi as and when required.
• To attend Tool box meeting in time particularly in the weekend and nightshift and hand over the activities with return forms.
• To Monitor the day hift and night shift Progress and allocate the jobs unden his sub ordinates.

Job Requirement

• 5 -7 years of experience
• Good computer knowledge
• Day & Night shift with extendable working hours
• Good experience in EPC Projects for Oil & Gas, offshore Renewables & System

Our Addresses:

Seatrium - Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Join Our Team at the School of Biological Sciences, Nanyang Technological University, Singapore

The School of Biological Sciences (SBS), part of the College of Science, was established in 2002 with a mission to advance biological and biomedical sciences. At SBS, our research spans various areas, including infectious diseases, immunology, neurodegenerative diseases, telomere biology, and genome function. Over the years, SBS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

Position Available: Research Fellow in Structural Biology

We are currently seeking a Research Fellow specializing in structural biology at SBS. The ideal candidate should possess technical expertise and knowledge in mycobacterial protein engineering, recombinant expression, enzymology, and 3D structure determination. Additionally, the candidate will provide leadership, effective communication skills, and mentorship to students within the team.

Key Responsibilities:

• Conduct research in structural biology, with emphasis on mycobacterial protein engineering, recombinant expression, enzymology, and 3D structure determination.
• Provide leadership, communication skills, and mentorship to students working in the team.

Job Requirements:

• PhD in a relevant field.
• Extensive technical experience and knowledge in mycobacterial proteins, cultivation of mycobacteria, and structural biology.

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Interested applicants are invited to apply directly at our NTU Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description:

• Drafting: Create precise civil and structural drawings, including plans, elevations, sections, and details using CAD software. Interpret and implement design concepts provided by engineers or architects into detailed and accurate drawings.
• Design Coordination: Coordinate with civil and structural engineers to ensure that drafting designs align with project specifications and requirements. Review design documents to identify potential conflicts or issues and propose solutions
• Document Management: Maintain organized and up-to-date documentation of all drawings, revisions, and related project files. Ensure that all drawings comply with company standards and industry regulations
• Quality Control: Conduct quality checks on drawings to ensure accuracy, completeness, and compliance with relevant codes and standards. Address feedback and revisions promptly to meet project deadlines.
• Communication: Collaborate with project teams, engineers, architects, and other stakeholders to address design-related queries and provide clarifications. Participate in design review meetings and contribute insights to improve the overall design process.
• Qualifications and Skills:
• Diploma or degree in Civil Engineering, Drafting, or a related field.
• Familiar with 3D CAD software (AutoCAD, Revit, etc.)
• Knowledge of Bentley, Fuzor, Synchro, Navisworks is advantageous
• Understanding of civil and structural engineering principles and construction methods.

Other Information:

• 5 day work-week
• 19 Kian Teck Road (Off Upper Jurong Road) / Chua Chu Kang

Responsibilities:

• Manages and coordinates a team of drafting and detailing engineers, cost estimators, fabrication and project team

• Ensures proper planning and execution of projects to meet or exceed performance indicators in terms of quality and timeframe

• Oversees the planning of project operations and resolves technical and scheduling issues on-site

• Main point of contact and liaison between project teams and the client's representatives, consultants, and relevant authorities

• Review contract, design drawings, specifications, and bid documents

• Implement effective contract and claim management to increase the contractual margin and protect the Company against liability claims

• Site visits to review the progress of your job

• Monitor compliance of work with workplace safety and health regulations

• This job description is not all-inclusive and may include other duties as assigned

• Candidates should be able to manage multiple projects of various sizes and levels of complexity.

Requirements

• Minimum 5 years of Project Management experience.

• Diploma or equivalent Bachelor's Degree in Construction Management, Structural/Civil Engineering

• Experience with fabrication and installation of structural steel and miscellaneous metals

• Strong analytical, written, and verbal skills.

• Strong computer skills, including AutoCAD, Microsoft Office Suite Project setup

Kindly provide your expected salary, last drawn salary, and reason for leaving in your CV/Resume

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience

Job Description & Requirements

• Supports technical solutions
• Recognizes problems that are beyond capabilities and is learning from the experts in the area
• Supports new capital equipment purchases and implementation
• Supports cell layouts and process improvement initiatives
• General understanding of Six Sigma and lean tools to improve processes
• General understanding of Design for Manufacturability and Assembly (DFMA) concepts and supports new product introduction
• Represents the company with our customers
• Supports updates to management on operations status
• Learns the steps involved to incorporate process improvements
• Supports the manufacturing floor for any process related questions
• Creates and maintains process documentation and updates work order documentation
• Supports implementation of basic engineering changes
• Adheres to applicable Quality System requirements
• Supports Process Flow Charts, PFMEA, and Control Plans
• Learns from more senior Operations Engineers. May guide/direct Manufacturing Specialists.

-To Project management Coordinate with main-con and consultant for drawing submission, material sample submission and meeting with main-con and consultant

-Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptade layout, single line diagrams, CCTV, data Telcom operational routing diagram, ELV systems, control schematic and writing diagrams

-Identify discrepancies in tender/contract/IFC drawings and raise queries for clarification, A and A ( R and R) + Constriction Filed

- Attend all operational matters related to the daily running of the project and Handle multiple projects simultaneously

-Testing and commissioning for Electrical apparatus

-QA/QC documentation review of engineering deliverables

-LV and HV cables sizing calculations and prepare a bill of material

-Planning workforce arrangement and supervision and working planning

-Giving progress reports regularly to teams and monitoring project schedules

-Prepare Electrical shop and As-builts SLD Rcp drawing

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

• Oversee daily construction activities, ensuring compliance with safety regulations, quality standards, and project specifications.
• Collaborate with architects, engineers, and other construction professionals to develop project plans and schedules.
• Monitor project expenses, track budgets, and implement cost-saving measures where possible.
• Conduct regular site inspections to ensure that construction work meets design specifications and safety standards.
• Address and resolve any issues or delays that arise during the construction process.
• Maintain accurate records of project progress, changes, and communications with stakeholders.
• Ensure all work complies with local building codes, regulations, and company policies.
• Prepare and present progress reports to project managers, clients, and other stakeholders.

Qualifications:

• Bachelor’s degree in Civil Engineering from an accredited institution.
• Preferably with atleast 2 years of experience in construction engineering or a related field.
• Proficiency in construction management software (e.g., Procore, Buildertrend)
• Strong understanding of construction methods, materials, and legal regulations.
• Excellent problem-solving and analytical skills.
• Effective communication and leadership abilities.