Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Overview:

This is an opportunity to directly work in a health services sector as an Application Support Engineer (System Analyst).

Responsibilities:

• Provide level 2 application support, liaise with level 1 and level 3 support teams within the company and other organizations to resolve incidents and recover service.
• Provide 24/7 primary application maintenance and support.
• Work with level 3 support teams to fulfill service requests and change requests.
• Document and track incidents, service requests, change requests and provide regular progress updates.
• Coordinate closely with support teams to test and deploy defect fixes, enhancements and patches to production environment.
• Lead and coordinate regular system maintenance and upgrade activities such as monthly maintenance, patching and hotfix deployments.
• Review and update project documentation and processes.
• Work with procurement team and vendors to procure necessary software and services.

Requirements:

• Must have Degree in Computer Science, Computer Engineering or equivalent.
• At least 1 year experience in application support and operations.
• Good understanding of IT technologies, methodologies and processes including SDLC and Agile.
• Experience in application support and maintenance for mobile applications and web portals.
• Good track record in managing business users and working with other support teams.
• Strong analytical skills and ability to work independently.
• Experience in healthcare industry is an added advantage.

Morgan McKinley Pte Ltd

Cedric Ferreras

EA Licence No: 11C5502

EA Registration No. R1870889

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Test Engineer

Our reputable client is looking for a System Test Engineer Lead (Selenium) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 5 years of System Test experience using Selenium.
• Experience in leading a Team of Engineers.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.

• Integrate automation solutions across applications to enhance operational efficiency.

• Ensure best practices and security are prioritized when developing CI/CD pipelines.

• Continuously improve operational workflows through task automation.

• Collaborate with subject matter experts to ensure automation solutions meet business requirements.

• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

• Proven experience with Kubernetes and containerization technologies.

• Strong understanding about DevOps and DevSecOps terminology.

• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.

• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.

• Management configuration tool like Ansible, Puppet.

• Familiarity with scripting languages such as Python, Bash, and PowerShell.

• Experience working in multi-cloud environments, including AWS, Azure and GCP

Job Responsibilities:

• Develop and deploy machine learning models: Design, build, optimize, and deploy machine learning models to address business challenges.
• Collaborate with cross-functional teams to define objectives and integrate models into production systems.
• Model training and evaluation: Train and fine-tune models using advanced algorithms, ensuring optimal performance through techniques like cross-validation and hyperparameter optimization.
• Model deployment and integration: Work with software engineers and DevOps to deploy models, implement APIs, and integrate solutions into existing applications for real-time decision-making.
• Performance monitoring and maintenance: Continuously monitor, refine, and enhance model performance, addressing anomalies and incorporating user feedback.
• Data analysis and insights: Conduct exploratory data analysis, generate insights, and present findings using statistical and visualization techniques.
• Stay up-to-date with the latest advancements: Stay updated with advancements in machine learning and AI, recommending tools and methodologies to improve workflows.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Data Science, Machine Learning, or equivalent experience.
• Minimum 2 years’ experience in a similar role, with hands-on expertise in designing, developing, and deploying machine learning models.
• Strong knowledge of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn).
• Experience with Large Language Models and Generative AI is a plus.

Technical skills:

• Proficiency in Python and machine learning frameworks (e.g., TensorFlow, PyTorch, Scikit-Learn).
• Strong foundation in statistical analysis, probability, and hypothesis testing.
• Familiarity with cloud-based machine learning tools (AWS, Azure, GCP) and distributed computing frameworks (e.g., Spark) is a plus.
• Analytical mindset with the ability to solve complex problems and develop innovative solutions.
• Excellent communication skills for conveying technical concepts to diverse audiences.
• Proven teamwork and multitasking capabilities.
• Adaptable and committed to continuous learning, with a focus on staying updated on advancements in machine learning and AI.
  

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Responsibilities

1. Work with business development, Engineering, system test and external customers to gather information and develop RF Test plans, specifications for product under test.
2. Perform RF testing using test equipment such as spectrum analyzer, noise figure meter, power meter, network analyzers, and signal generators.
3. Assembling/debugging the RF test system and device under test.
4. Hands on troubleshooting and repair of RF product till component level using RF and digital measurement tools & equipment.
5. Analyze test data and provide reports on yield.
6. Document test procedures, results, and any issues encountered during testing and debugging.
7. Assist in the development of new RF testing methodologies and best practices.
8. Do simple antenna parametric radiation measurement

Requirements

· Diploma /Bachelor in Electronics or Communication Engineering, or equivalence

· Preferably with at least 2 years of working experience in a product-based electronics manufacturing environment / product development.

Skills, Experiences & Knowledge

· Experience in automating test and measurements using bench test equipment.

· Knowledge of programming software in C, C#, Python or LabView.

· Experience with PCB design software

· Experience in antenna parameter measurement

· Preferably with soldering experience

· Excellent communication and documentation skills.

Kindly forward your resume in Word format to apply(at)tekvillage.com

EA Licence No: 18C9120

EA Personnel: R1764354

Note: Only shortlisted candidates will be notified.

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

Responsibilities:

· Execute field service activities per Company procedures and general practices of safety and cost-effectiveness.

· Perform basic troubleshooting, running tests, fine-tuning, adjustments, and trimming related to running performance on equipment.

· Independently perform significant/complex repairs and complete overhauls.

· Perform warranty and commissioning activities, delivering the equipment to the customer or a shipyard.

· Perform internal and external progress status reports of assigned work.

· Participate in briefings and debriefing for each service mission

· Create Service Work Reports.

· Collect and organize time sheets and expense reports. Report and inform the back office as required.

· Ensure the work is executed according to Company Quality, Health, Safety, and Environmental guidelines and customer site procedures.

· Issue WeCare and Non-Conformance Reports when appropriate to ensure "lesson learned" from experiences gained at service missions

· Execute Client Survey after each job

· Supervise the tasks performed by Company employees and subcontractors.

· Advice and promote company products and solutions to customers.

· Participate in other department work as directed by the Line manager.

Requirements:

· Bachelor degree in Process, Automation, Mechanical, Marine, Electronics, or Mechatronic Engineering

· 3-5 years hands-on experience in process and electrical & Automation disciplines

· Knowledge or Experience in LPG/LNG/VOC/IG, Flare Gas systems, and Renewable & General Gas handling would be considered as advantage

Responsibilities and Tasks
• Provide engineering study is to include good design practice for state-of-the-art system designs, system capacity and capability analysis, planning for future requirements, as well as code compliance.
• Maintain engineering data bases in support of capacity tracking, capital equipment facilitation, and cash flow project management for assigned systems/areas.
• Provide support for start-up of new equipment and ensure that all equipment will properly interface to other mechanical and electrical systems.
• Specify critical components for design projects and is responsible for assuring designs meet all applicable codes and regulations. The applicable code review and analysis utilizing (but not limited to): IFC, IBC, NEC, NFPA, FM, CGA and Semi standards. This requires continual review and analysis of new and existing equipment, applications, and technology.
• Perform engineering study on emerging facilities technologies to support cutting edge semiconductor processes.
• Participate in mid to long term infrastructure planning for facilities in support of the overall company plan.
• Work with in-house TGCM contractor and ensure chemical and Gas Delivery system running smoothly.
• Review and improve Operation and Maintenance SOP and RA.
• Respond to system issues. Perform Trouble Shooting with in-house TGCM contactors and OEMs.
• Verify all works done by Chemical and Gas section are in accordance with company safety guidelines;
ensure safety features are engineered into designs; and maintain good communication with other engineering disciplines and customers throughout the organization.
• All team members are required to complete their learning items within the stipulated time frame.

For business process and/or QMS component that one is responsible or accountable for:
a. ensuring the QMS/business process that is effective and conforms to requirements.
b. ensuring that the processes are delivering their intended outputs.
c. reporting on QMS/business process performance and opportunities for improvement to management.
d. ensuring the promotion of internal and external customer focus throughout the organization.
e. ensuring the maintenance of the integrity of the QMS/ business process when changes are planned and implemented.
f. ensuring customer requirements are met.

• Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws
and regulations.
• Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings.
• Prepares bid sheets and contracts for construction and facilities acquisition.
• Reviews and estimates design costs including equipment, installation, labor, materials,preparation and other related costs.
• Inspects construction and installation progress for conformance to established drawings, specifications, and schedules.
• Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Education

• Bachelor’s degree in Chemical Engineering or equivalent discipline.

Skills, Knowledge and Abilities

• Good team work and collaboration

• Excellent communication and presentation skills

• Strong problem solving and analytical skills

• Independent and able to work on own initiative

• Good organizational skills and ability to prioritize and schedule workload

• Good knowledge of Microsoft Office

Plans facilities changes for plant, office, and production equipment layouts, working toward economy of operation, maximum use of facilities and equipment, and compliance with laws and regulations. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation and other related costs. Inspects construction and installation progress for conformance to established drawings, specifications, and schedules. Develops criteria and performance specifications required to meet unique operating requirements and building and safety codes.

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Purpose: Responsible for establishing process steps to produce in-house-made parts and meet customer expectations concerning quality, lead time, cost, and technological needs. Process Engineer drives improvements in process methods to enhance performance and output.

Key Area of Responsibilities:

• Establish process steps to produce in-house-made parts and meet customer expectations in terms of quality, lead time, cost, and technological needs, without compromising health and safety.
• Create process routing (work instructions) & BOM in BaaN, and prepare an Inspection Method Sheet (IMS)/checklist.
• Read and interpret 2D drawing, 3D model and customer specifications on drawing.
• Ensure process routing is ready for both the first article and volume production.
• Perform sustaining engineering work (documentation of the process, optimization of resources, support production team, resolving technical/quality issues).
• Monitor process performance (quality, cost, lead time) and yield using tools (e.g.: SPC).
• Monitor First Article (FA) progress and resolve technical issues in a timely manner to ensure smooth production flow from FA to volume production.
• Drive improvements to process methods to enhance performance and output.
• Take accountability in leading special projects and processes, treating it like a specialist in the identified process assigned by a superior.

Qualification & Experiences:

• Degree in Mechanical, Precision Engineering, or other relevant discipline.
• Minimum 3 years of working experience in the precision machining industry.
• Strong knowledge of manufacturing processes
• Knowledge of interpretation of engineering drawing
• Knowledge of designing tools (GD&T)
• Problem Solving and Continuous Improvement

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

• MNC Company
• Basic $5000 - $6000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working days: Monday to Friday
• Working hours: 8.30am to 5.15pm
• Jurong Island. Company Transport provided
• Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF

Job Responsibilities:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.
• Liaise with local authorities for all EHS issues, License renewal and represent the RC/SICA/SORT and other relevant meetings.
• Other ad-hoc duties as assigned.

Requirements:

• Min Diploma in Chemical Engineering
• At least five years of primary experience handling safety responsibilities within HSE department
• At least 3 years of working experience in the oil or petrochemical industry. Preferably experienced in Jurong Island
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF
• Good command of English (spoken and written)
• Experience with ISO14001/ SS651(ISO45001) management systems

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are looking for a Civil and Structural engineer who has a strong interest in design and who is keen to learn and grow with a dynamic team. We welcome highly enthusiastic individuals who are energetic and flexible. Successful candidate will have the opportunity to work with a committed team of professionals to develop himself/herself and at the same time enhance the strength of the company.

Preferred Attributes:

• Honors Degree in Civil and Structural Engineering
• Masters Degree in Civil and Structural Engineering is a plus
• Interest in structural design and analysis
• Good attitude and communication skills

Job Scope:

• Create and analyze structural designs for buildings and infrastructure
• Oversee construction projects, ensuring timelines and budgets are met
• Conduct visits to assess compliance with design specifications
• Perform calculations for loads and stresses on structures
• Prepare design drawings, specifications, and reports
• Work with architects and engineers to integrate designs
• Ensure adherence to building codes and safety standards
• Address structural issues with innovative solutions
• Stay updated on materials and construction techniques
• Liaise with clients for project updates and requirements

Requirements:

• Minimum PhD or Master's degree in Civil and Structural Engineering (or equivalent)
• At least 2 years of relevant experience in Civil and Structural Engineering design
• Proficiency in steel 3D modeling, analysis, and design software (e.g., Rhino, Grasshopper)
• Proficiency in programming languages (C++, Python, Fortran)
• Ability to produce detailed layout drawings
• Experience in Tensile Membrane, ETFE Skylight, and Steelwork design is a plus
• Good command of English

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsible for Liaising with consultants, contractors & authorities on project.

To prepare M & E co-ordination drawings and M&E submission.

Supervise / coordinate M&E or structural works at site.

Assist the M&E engineer in planning and monitoring of construction work process.

Will be working closely to the clients, consultants and sub-contractors on technical matters

Supervise day-to-day site works

Execute mechanical and electrical works in building construction.

Handle the project supervision and documentation

Expertise in Site Supervision and Execution

Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress

Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions

Ensure of quality of works is achieved and safety regulations are complied with

Ensures that the works are carried out in compliance to approved design, drawings and local authorities' requirements and regulations.

To prepare quotation based on the BQ's and line drawings

Should be aware of BIM

Able to prepare AUTO CAD drawings

Should be skilled in REVIT Software

To inspect the site and provide quotes by coordinating with the client

Must have experience in preparing and quoting government tenders

Must have ability to bid and take projects

Analyzing and enhancing effieciency of existing systems and processes

Job Description & Requirements

• Perform end user IT Support
• Perform troubleshooting for client platform related problems
• Support Windows OS, office software, and other Desktop Related Software & Hardware Respond promptly to incident,
• investigate & provide temporary &/or permanent resolution of incidents escalated
• Liaise with support vendors for maintenance, support or issues resolution
• Monitor the agreed service level, document & maintain the configuration of the systems Involve in client platform implementation/upgrade project
• Any ad-hoc duties assigned / required.

• Basic up to $4,200, depending on experience
• No experience also welcomed to apply, with minimum qualifications required
• Annual Increment + Performance Bonus
• Disciplines in either M&E or Building Services

Responsibilities:

• Lead project phases, ensuring adherence to resource, quality, and risk standards, while managing project profitability.
• Coordinate administrative aspects of projects, including reporting, claims, and invoice processing, up to final handover documentation.
• Identify and address project issues, proposing quality, risk, and administrative process improvements.
• Foster effective communication and negotiation, liaising between internal and external stakeholders to ensure project cohesion.
• Manage subcontractor integration, ensuring compliance with technical requirements.
• Interpret project drawings, identify discrepancies across trades, and develop resolutions.
• Oversee project planning, scheduling, and execution of alteration and addition (A&A) works to ensure on-time completion.
• Regularly update management and clients on project progress, maintaining transparency and accountability.

Requirements:

• A Diploma or Bachelor's Degree in Mechanical/Electrical Engineering or Civil/Construction/Building Services Engineering, with a strong understanding of electrical installations or relevant field.
• Minimum 5 years of experience in a related field, with at least 3 years in facilities/building maintenance.
• Proven leadership ability, with the skills to manage and motivate a team effectively.
• Excellent organizational and multitasking skills, capable of managing multiple projects concurrently.
• Class 3 driving license is advantageous.
• Demonstrated commitment, positivity, and the drive to work independently and deliver excellence.

Tyson Jay Recruitment Pte Ltd | EA License No.: 16C7954

Tay Shiong Luan | EA Personnel No.: R23115166

Job Description

• Working with Process Engineer & Engineering team on QC requirement
• Documenting inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

Job Requirements:

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirement in PCB
• Assembly, quality requirement of plastic molding, die casting, extrusion, metal stamping and machining parts

*Please be notified that only shortlisted candidates will be notified*

By submtting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: Chan Jun Wei

EA Personnel No: R1543992

EA License No: 21C0845

Ship Repair Engineer | Up to $4k | 5 Days | Clementi

• Location: Penjuru lane ( Transport provided at Jurong East)
• Monday to Friday: 8:00 AM – 5:00 PM
• Saturday: 8:00 AM – 12:00 PM
• Salary: $3,300 - $4,000

Job scopes:

• Manage day-to-day operations and coordination of afloat repairs, load testing & inspection services on ships in Singapore and the region.
• Assist Service Manager in handling the company’s field service operations, in technical, operational and commercial matters
• Prepare quotations, costing for invoice, tools & equipment lists and procurement of parts.
• Manage and coordinate service job execution.
• Liaise with our customers, such as Ship Managers, Offshore Operators, Shipyards, Agents and others
• Manage the tools & equipment which are kept at our warehouse. Send for recertification periodically as required.
• Coordinate with Ship Agents, Ports & Ship Yards, handle permits and schedule service attendances.
• Coordinate and arrange transport of Engineers, tools & equipment to and from job sites
• Answer customer queries and provide remote technical support.

Job Requirements:

• Diploma in Marine Engineering or similar.
• Past experience in marine cranes & deck machinery required.
• Experience in coordinating marine service work, especially afloat repairs will be an advantage.
• Able to commit overtime.

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• American MNC
• Basic from $4,500 - $6,500
• AWS + transport allowance
• Monday – Friday, 8:30am – 5:15pm
• Location: Boon Lay

Responsibilities

• Identify and pursue new business opportunities by contacting potential customers, decision-makers, and target accounts, and analyse market strategies to evaluate options.
• Develop persuasive pitches and collaborate with regional and global teams to secure deals, build pipelines, and progress sales opportunities to closure while maintaining accurate CRM data.
• Cultivate relationships with end customers, influencers, and contractors through direct engagement or distribution partners, ensuring long-term collaboration.
• Set budget forecasts and sales volume targets for the SEA Data Centre market and guide distributors on pricing and quotation strategies.
• Promote the company at trade events, prepare technical papers, and provide marketing and technical support to distribution partners.
• Analyse sales and market data for management decision-making and monitor industry standards and power system solutions to maintain technical expertise.

Requirements

• Degree in Electrical or Mechanical Engineering with at least 5 years of sales experience in the power generation business.
• Proven track record in direct and channel sales, with strong presentation and negotiation skills for engaging senior executives.
• Results-oriented and highly motivated, with strong communication, interpersonal, and teamwork skills.
• Solid technical knowledge of power generation products and solutions, particularly for Data Centre applications, with familiarity in industry standards.
• Willing to travel frequently and work independently in a competitive environment.
• Bilingual in MANDARIN & English to liaise with Mandarin-speaking customers.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected]

**Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752
EA. Registration No.: R24123733 | Chen Yit Keat

Job description:

Customer support:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

Service administration

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma in Engineering

• Min. 1 to 2 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

Apply now by sending your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified

Alex Goh Hock Leong | CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Sciences) | 99C4599

RESPONSIBILITIES

• Parts teardown, re-assembly, re-certification and qualification
• Troubleshoot PCB Electronics

REQUIREMENTS

• Knowledge of soldering is required
• At least 5 - 8 years of soldering experience will be considered for Engineer position.
• Troubleshooting of electronics components or semiconductor components is preferred.
• Knowledge of Repairs in Semiconductor Industry is advantageous
• Up to board / component level experience is ideal.

Thank you for your application and we regret that only shortlisted applicants will be notified

By submitting any application or resume to us, you will be deemed to have agreed & consented to us collecting, using, retaining & disclosing your personal information to prospective employers with the services provided by us.

EA (18C9514/R23118479)

(Barcode and Office Automation solutions)

Working Day: Monday – Friday (8.30am – 6pm)
Working location: Ubi
Salary: SGD 2,200 – SGD 2,500 + Commission + Allowance

Job Description:

• Active canvasing for new customer base
• Achievement of agreed upon sales targets and outcomes within schedule
• Pre-sales activities to ensure healthy pipeline and good closure rate, with post-sales activities occasionally according to sales requirement
• Performance of sales cycle which includes sales quotation, order confirmation, purchase requisition, delivery (urgent case), installation (occasionally), payment collection

Requirements:

• Basic IT knowledge in Tele-Communication, Excel, PowerPoint
• Polytechnic Diploma - Electrical & Electronics Engineering is preferably.
• IT Solution selling and experiences in Electronics, Transport, Logistics, Aerospace, Hospitality industries is preferable.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279