Duties and Responsibilities

1. Be aligned and act in accordance to SMRT's Vision, Mission, Service Standard and Core Values.

2. Ensure good understanding, knowledge and skills needed for all maintenance activities and provide support for staff training.

3. Lead and supervise a team of Technical Officer(s) to perform preventive, corrective, overhaul, troubleshooting, engineering analysis, investigation or any assigned maintenance activities on all rolling stocks, depot and workshop equipment.

4. Assist to plan and coordinate staff deployment and shift roster to optimise resources utilisation.

5. Verify and ensure all tasks executed by the team are in accordance to latest Work Instructions, Quality, Maintenance, Operational and Safety Procedures, and to ensure personal and peers’ safety at all times.

6. Ensure spares, tools and equipment used are in good condition and calibrated if necessary.

7. Perform train shunting activities and operate depot equipment, maintenance vehicles and maintenance equipment to support maintenance activities of the group.

8. Verify and ensure work records done by the team are updated factually, accurately and timely on Work Records Form and on the Maintenance Management System

9. Report immediately any abnormalities or practices observed that are not in accordance to Work Instructions, Quality, Maintenance, Operational and Safety Procedures.

10. Adopt KAIZEN methodology (5M, 5S & 5W) to eliminate 8 Wastes and improve Productivity and Value of work performed.

11. Provide support to staff, contractors or any other personnel who are required to perform work on depot and all rolling stocks.

12. To support the group during incidents, accidents and emergencies.

13. Ensure excellent housekeeping are maintained within all work areas.

14. Maintain a high level of work discipline and standards.

15. Perform any other task as assigned.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

• Role and Responsibilities

1. Responsible for all aspects related to Access Control System during project deployment from system designs, installation and commissioning
2. Manage day-to-day operations of the project team, plan and deploy available resources effectively to ensure the projects are running smoothly on time.
3. Monitor site progress and make necessary arrangement.
4. Check and summit updated drawing accordingly.
5. Monitor the operations of project, technically and commercially.
6. Attend meetings and briefings by customer
7. Properly handover to customer completed project
8. Brief internal Service and Maintenance Team upon handover of completed projects
9. Deliver projects according to schedule, client satisfaction and installation standards.
10. Update and Reporting to the Project Manager and responsible for work completed documentation and follow up on quotations.
11. Co-ordinate with customer, contractor, and work closely with internal departments to ensure projects are completed on schedule.
12. Supervise and monitor progress of works on site

• Requirements
   1.Diploma in Professional Certificate/ NiTEC, Diploma, Engineering (Mechanical), Engineering(Others) or equivalent
   2.Good IT background knowledge
   3.Knowledge of AutoCAD drawing for basic setup
   4.Having PA & CCTV knowledge will be an advantage (Security / Communication Field).
   5.Possess good interpersonal skills and ability to handle pressure.
   5.Able to travel overseas whenever required.

Benefits:
 1. BONUS + ALLOWANCES BASED ON PERFORMANCE
 2. Annual Leave
 3. Marriage Leave
 4. Childcare / Parental leave
 5. Medical Claims
 6. Cell phone reimbursement
 7. Employee discount
 8. Travel allowance provided
9. Professional development

Roles and Responsibilities

a) Support cost optimisation got GCC environment

b) Project administration and documentation (procurement, audit etc)

c) Drive cloud-related initiatives with other teams (coordination)

d) Advise and support project teams with cloud-based domain knowledge

e) Support incident management (when needed)

f) Plan and organise workshops

g) Support operations for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)

h) Present and share new ideas or information with department or management committee

i) Analyse the Ministry of Manpower (MOM) needs, scope the problem and develop business case to address the problem

j) Document requirements, source and evaluate alternatives, and recommend solution that best fits the Ministry of Manpower’s needs

k) Work with MOM vendor and app vendor on the solutions and design to seek clarification and acceptance.

l) Assess and ensure applications are in full compliance to IM8 and security requirements laid out by Government Technology Agency (GovTech) or MOM

m) Remediate any non-compliance or security findings related to accounts in GCC environment

n) Perform scripting or low-code development

o) Review and refine existing processes and workflows to improve efficiencies

4. Knowledge and Skills

EDUCATIONAL QUALIFICATIONS

a) Tertiary education in Computer/Computer Science or Information Technology or equivalent

b) AWS certifications such Developer (Associate) Certification, AWS SysOps Administrator (Associate), AWS Solution Architect (Associate/Professional), AWS DevOps Engineer (Professional) is preferred

c) Knowledge of serverless architectures

d) Familiarity with various coding languages, such as Python, Java etc.

RELEVANT EXPERIENCE

a) Ability to work both independently and as part of a team with professionals at all levels

b) Results oriented

c) Hands-on experience in handling operations and incident management

d) Strong proficiency in AWS services and architecture

e) Experience with infrastructure-as-code tools (e.g., Terraform, CloudFormation)

f) Proficiency in scripting languages (e.g., Python, Java)

g) Familiarity with security tools and practices (e.g., SAST, DAST, IAST)

h) Understanding of cloud security best practices

i) Experience with monitoring and logging tools (e.g., CloudWatch)

j) Experience in supporting operation for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)

k) Familiarity with governance and adoption for enterprise IT environments

l) Strong analytical, conceptualisation and problem-solving skills

m) Team player with strong organization and people handling skills

n) Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders

o) Working experience in government environment and/or cybersecurity related fields will be an added advantage

p) Advantageous to have experience in the following areas:

• Government IM8 policies

Roles and Responsibilities

a) Support cost optimisation got GCC environment

b) Project administration and documentation (procurement, audit etc)

c) Drive cloud-related initiatives with other teams (coordination)

d) Advise and support project teams with cloud-based domain knowledge

e) Support incident management (when needed)

f) Plan and organise workshops

g) Support operations for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)

h) Present and share new ideas or information with department or management committee

i) Analyse the Ministry of Manpower (MOM) needs, scope the problem and develop business case to address the problem

j) Document requirements, source and evaluate alternatives, and recommend solution that best fits the Ministry of Manpower’s needs

k) Work with MOM vendor and app vendor on the solutions and design to seek clarification and acceptance.

l) Assess and ensure applications are in full compliance to IM8 and security requirements laid out by Government Technology Agency (GovTech) or MOM

m) Remediate any non-compliance or security findings related to accounts in GCC environment

n) Perform scripting or low-code development

o) Review and refine existing processes and workflows to improve efficiencies

4. Knowledge and Skills

EDUCATIONAL QUALIFICATIONS

a) Tertiary education in Computer/Computer Science or Information Technology or equivalent

b) AWS certifications such Developer (Associate) Certification, AWS SysOps Administrator (Associate), AWS Solution Architect (Associate/Professional), AWS DevOps Engineer (Professional) is preferred

c) Knowledge of serverless architectures

d) Familiarity with various coding languages, such as Python, Java etc.

RELEVANT EXPERIENCE

a) Ability to work both independently and as part of a team with professionals at all levels

b) Results oriented

c) Hands-on experience in handling operations and incident management

d) Strong proficiency in AWS services and architecture

e) Experience with infrastructure-as-code tools (e.g., Terraform, CloudFormation)

f) Proficiency in scripting languages (e.g., Python, Java)

g) Familiarity with security tools and practices (e.g., SAST, DAST, IAST)

h) Understanding of cloud security best practices

i) Experience with monitoring and logging tools (e.g., CloudWatch)

j) Experience in supporting operation for applications hosted on Amazon Web Services (AWS) or Government on Commercial Cloud (GCC)

k) Familiarity with governance and adoption for enterprise IT environments

l) Strong analytical, conceptualisation and problem-solving skills

m) Team player with strong organization and people handling skills

n) Excellent communication skills, both oral and written, with the ability to pitch ideas and influence stakeholders

o) Working experience in government environment and/or cybersecurity related fields will be an added advantage

p) Advantageous to have experience in the following areas:

• Government IM8 policies

Job Description:

POSITION OVERVIEW : Software Development Analyst

POSITION GENERAL DUTIES AND TASKS :

Understand Continuous Integration and Continuous Delivery (CICD) concepts and principles.

Implement a CICD Pipeline using the required DevOps tools as defined in the CICD architecture and adhering to CICD principles.

Design and implement each of the DevOps, DevSecOps & DevTestOps tools based on best practices.

Work with project teams to on board their project onto the DevOps pipeline.

Implement automation of development and operations for digital projects.

Support the DevOps pipeline and the relevant tools.

Support and maintain the relevant tools.

Example of activities includes are: product patching, issue troubleshooting, ensure service availability.

Tracking and assessing release performance

Takes accountability in considering business and regulatory compliance risks and takes appropriate steps to mitigate the risks.

Maintains awareness of industry trends on regulatory compliance, emerging threats and technologies in order to understand the risk and better safeguard the company.

Highlights any potential concerns /risks and proactively shares best risk management practices.

Our Requirements

Bachelor’s degree in a relevant field. (i.e. IT, Computer Science or Software Engineering)

At least 8 ~ 12 years of relevant experience.

Able to design, implement, use and integrate tools such as Bitbucket, Bamboo, Nexus, Ansible etc with consideration of the security controls required to deliver the CICD Pipeline.

Experience with DevSecOps Tools such as SonarQube, Blackduck, AquaSec, Coverity etc.

Familiar with Linux and Windows operating systems

Experience with monitoring and logging tools such as DynaTrace, ELK etc.

Familiarity with Containers technologies such as Openshift, Tanzu, Docker is a plus.

Strong understanding of best practices in using the DevOps Tools. Eg, Branching strategy, Artefact Management etc.

Good oral and written communication skills.

Must be proactive, resourceful and self-motivated with strong analytical skills.

Good interpersonal, written and communication skills.

Experience in software and application development that requires analysis and design work.

Strong understanding and experience in practicing Continuous Integration, Automated Testing and Continuous Deployment

Knowledge/Experience in Agile Development and Management tools, e.g. Jira and Confluence

High level of integrity, takes accountability of work and good attitude over teamwork.

Takes initiative to improve current state of things and adaptable to embrace new changes.

Electrical Engineer

Job Responsibilities:

• Supervise electrical equipment testing and commissioning on-site, including reviewing and submitting site acceptance test reports.
• Review Single Line Diagrams and Electrical Schematic Drawings.
• Assist with electrical equipment installation inspections.
• Attend site activities and meetings involving clients and contractors.
• Undertake tasks and assignments as directed by the Commissioning Lead.

Job Requirements:

• Diploma in Electrical Engineering.
• Minimum 2 years of local working experience in the related field.
• Initiative and ability to multi-task in a fast-paced environment.
• Experience with MV/LV electrical equipment (site installation, testing, commissioning, and maintenance testing) is an advantage.

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project
• Liaise with consultants and /or sub-contractors on the project matters
• Attend meetings with owner/client/contractors/sub-cons on the project related matters
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution
• Carry out in-progress inspection and joint inspection and to ensure that the works were executed to the required quality standard
• Update the project quality plan as and when appropriate
• Assist Project Manager on the tasks assigned

Requirements:

• Candidate must possess at least Bachelor's Degree/professional Degree in Engineering (Civil) or equivalent
• At least 3 year(s) of working experience in the related field is required for this position
• Preferably Seior Executive Specialized in Engineering- Civil/Construction/Structural or equivalent.

Candidates in Singapore, I'm hiring a Lead System Engineer for a global client. If you have proven experience

- with day 1 implementation of public cloud infrastructure for your environment
- engineering (not just support/administration) with WinOS and AD
- effectively managing 3rd party vendors to align tech strategy

we welcome you to apply for this opportunity and would be glad to provide more information.

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Job description

• Support agency in new cloud related projects implementation.

• Assist agency in reviewing access rights, and accounts control in cloud.

• Review and resolve the vulnerabilities reported from scan and/or alerts.

• Provide consultancy to new projects to onboard AWS cloud services.

• Strengthen the security posture of existing cloud infrastructure and propose enhancement.

• Raise service request to BAU Operations Team for in-scope cloud related tasks.

• To support and maintain AWS S3 Buckets and other AWS Storage services such as FSX.

• To support Trend Micro Cloud One Workload and Endpoint Security / AMHIPS as part of Agency Anti-Virus/ Anti-Malware system.

• To support and maintain ABLR Heavy Forwarder as part of Agency Audit Logging requirement.

• To support Agency Infrastructure using DevOps process or tools such as Terraform or AWS CloudFormation.

• To support Audit and security compliance activities.

• Work with BAU team, System Engineers, Cloud Engineers, and DBA to support and maintain agency environment.

• To support and maintain Central Account Management (CAM) servers as part of Agency Audit requirement.

• To support Disaster Recovery exercises.

• Possessing Cloud certifications is preferred.

If no relevant certification, a minimum of 4 years working experience in the IT field and at least 2 years working experience in a cloud environment will be required.

Job Responsibilities:

• To coordinate with customers and sub contractors on maintenance and upgrading works.
• To prepare sales quotations, service orders and breakdown reports.
• To visit customers to gain their feedback.

Job Requirements:

• Diploma in Electrical, Electronics or Mechanical Engineering.
• Preferably 3 years of relevant working experience.
• Work experience in Lift/Escalator/Service/Project/Building industry preferred.
• Good communication skills.
• Only Singaporean need to apply

What a Product Engineer does at HP:

• Coordinates and leads activities of internal and outsourced development and manufacturing partners to support manufacture of products.
• Performs engineering analysis of defective product units or sub- assemblies, along with root-cause analysis in case of production matters.
• Evaluates results of customer feedback and manufacturing, test, and quality assurance processes for products and communicates product and process issue analysis to product stakeholders.
• Require to set up high volume line audit and sampling test plan for NPI product.
• Collaborates with management, internal, and outsourced manufacturing and development partners to address issues, recommend and implement changes to product or process to reduce defects, improve quality, and lower costs.
• Represents product engineering team for all phases of larger and more- complex development and manufacturing projects.
• Solves difficult and complex problems with a fresh perspective, demonstrating good judgment in selecting creative solutions and managing projects independently.
• Develops recommendations on changes and design enhancements to manufacturing processes to improve reliability, safety, outputs.
• Leads moderate to high complexity projects, and supports the realization of operational and strategic plans.
• Delivers professionally written reports, and supports realization of operational and strategic plans.

Individuals who do well in this role at HP, usually possess:

• Four-year or Graduate Degree in Electrical Engineering, or any other related discipline or commensurate work experience or demonstrated competence.
• Typically has 0-1 years of work experience, preferably in electrical design and tools, software packages, architecture of electronic hardware, or a related field.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

Job Descriptions:

Simtrum was founded in 2019 with the core mission to serve the optical industry with innovation and efficiency. Our founding team has decades of research and development experiences (across NUS and A-star) in high-end microscope systems. We now focus on confocal, super-resolution microscopy and other related fields, catering to both academia research and high end industrial production needs. Our proprietary high resolution microscopes adopt state of the art optical technology, image processing algorithms, with excellent imaging performance to meet the high resolution and fast imaging needs of our technology partners.

Simtrum is a young startup with many exciting opportunities to offer to the right candidates with the right mindset. We are now seeking the following commercial talents to join our team, to expand our reach and support our growth:

Job Descriptions:

1. Visit university professors to promote the company's microscope products and complete sales tasks.

2. Develop regional business based on existing products and assist in collecting market information for products under development.

3. Identify potential markets and establish effective market entry methods.

4. Establish marketing plans and strategies to expand your customer base.

Basic Requirements:

1.Ideally you should have a foundational education in either Electronic Engineering, Photonics, or Physics;

2.exposure to Laser or Optics industry a huge plus. Candidates with at least 1-2 years of related sales, marketing or e-Commerce experiences will be given priority considerations.

3.We are also open for fresh graduates with the right attitude and willingness to learn. To do well in the Simtrum environment, you should be someone with initiative, curious, can-do attitude, flexible, and eager to learn.

My client is an established Main Con.

Site Engineer x 1

• Civils works and building works.
• Coordinate site activities
• Plan Schedule
• Assist in casting.
• Involved in Inspection prior to casting.
• Assist Project Engineer/ Project Manager when required

Dip in Civil & Structural

No experience required

Training will be provided.

Responsibilities:

• Prepare the contract & procurement, sourcing strategies and facilitate/coordinate workshop to finalise strategies under the guidance of the Procurement Manager / Business Manager.
• Establish contract & procurement plan and set up the procurement system for the subsequent phases
• Establish procurement schedule to support modularisation study with the engineering contractors.
• Establish Project Approved Vendor List, preliminary supplier qualification (include. qualification system) and include new Chinese Eco System to lower the CAPEX.
• Engage CNPC procurement and Chevron Procurement Representative to provide guidance on vendors and supplier list to support project optimal capex exercise.
• Review and finalise vendor and fabricator list for enquiry to support Phase 3 cost estimate
• Provide write up, deliverables and work with Project Team, Shareholders and SRC stakeholders to set up the procurement plan and establish procurement system for Phase 4.
• Establish strong collaboration with internal/external stakeholders and suppliers to deliver commercially innovative solutions.
• Develop negotiation strategies and facilitate commercial negotiatons with vendors/suppliers/fabricators/trade contractors
• Support and liaise with base refinery on contract placement and draft Contract Committee deliverables for approval.
• Carry out all open bid procurement activities, e.g. third party consultant services/studies etc.

Requirements:

• Minimum 8~10 years experience in procurement activities in Oil & Gas Industry
• Bachelor Degree in Engineering or equivalent.
• Understanding of strategic, technical, legal, finance, taxation and commercial issues, able to cope with complexity and uncertainty.
• Experience managing various Contract formats (Reimbursable/Re-measurable/Lump Sum) for Major and Mega-Projects
• A high degree of skill in written and oral communications.
• Local and/or regional procurement experience (China/Asia) in a MNC, or fabrication yard procurement experience would be an advantage.
• Good procurement experience in international market.

Roles and responsibilities of Instrumentation Engineer

• Execute operational activities of the project within the timeframe, resources, and contract specifications
• Lead and execute the geotechnical instrumentation installation and monitoring works
• Assist the SIE/PM to ensure the smooth delivery of the project
• Involve in the preparation and submission of drawings, reports, and relevant documents to stakeholder
• Plan daily site activities, monitor project progress and work done quantity
• Ensure works are in accordance with drawing requirements. Ensure good quality of work including calibration of monitoring equipment
• Obtain any authorities’ or in-house clearances before work commencement
• Coordinate with the main civil contractor on the daily site works. Handle subcontractors’ activities (if any)
• Involve in geotechnical instrumentation testing, data acquisition, data verification and processing
• Prepare, review, and submit the instrument monitoring report
• Attend project meetings and inspections. Resolve site operation issues
• Ensure good recordkeeping. Assist in the preparation of progress claim
• Comply with internal and external WSHE requirements in the course of work
• Other duties as may be assigned on a need basis

Job Description

• Review engineering drawing & specifications, design and execute engineering experiments, calculations and statistical control for new products & processes
• Delivering engineering activities to support and improve the company’s manufacturing & supply chain operations.
• Ensure manufacturing processes are capable of meeting and continue to meet quality, cost, delivery rate and lead time requirements to customers.
• Perform trouble shooting & analysis of production & process issues. Perform process redesign where required.
• Identify opportunities for new or improved processes to meet current or future requirements.
• Perform new equipment & materials validation using standards involving IQ, OQ & PQ methodology.
• Source new suppliers, qualify specifications & perform cost estimation to price out project expenses.

Experience

• General awareness of Manufacturing Systems e.g. CAD, CAM, CAPP, Manufacturing Execution System, ERP & Technical Publications.
• General experience with work flow Simulation software & Robotics applications e.g. Flexsim & UiPath.
• Experience with write-ups on work procedure workflow & instructions for production process.
• Experience with statistical process control & other quality/performance control tools.
• Ability to apply ISO13485, GDPMDS & other ISO standards to existing operations & into new businesses.
• LEAN/Six Sigma practitioner.
• Knowledge of ISO requirements.
• Knowledge on end-to-end processes from technical/material qualification, supplier audit, process qualification to manufacturing & supply chain logistics engineering.
• Resourceful, able to independently conduct research & apply new solution to business requirements.
• Proven Project management skills.
• Good presentation skills.
• Independent, self-motivated, process oriented & analytical.

• Plan, conceptualize, and create mechanical designs for new products
• Develop testing processes, and perform testing and validation of new designs
• Generate working prototypes for beta testing and customer demonstration
• Perform engineering calculations to support design work
• Create and review technical drawings, plans, and specifications using computer software
• Collaborate with multi-disciplinary engineering teams, and work with vendors and contractors
• Perform detailed documentation to track project development and design process
• Ensure project timeline is met and project stays within budget

The Project Engineer will be responsible for planning, designing, and overseeing the installation of medical devices at various OR, ICU, CSSD and other healthcare project sites. This role requires technical expertise, project management skills, and the ability to collaborate with various stakeholders to ensure successful project execution.

Key Responsibilities:

• Responsible for overall planning and implementation to ensure timely delivery and meet the customer's requirements.
• Coordinate with site supervisors and project managers to ensure project alignment.
• Attend project meetings with the customer, main contractor and other parties.
• Prepare the monthly project documents: project progress report, project claims, minutes of meeting…
• Assist the project manager to collate the necessary project documents: scope of works, project timeline, method of statement, risk assessment, T&C checklists, OMM and material for submission.
• Work with company design engineer to prepare the project drawings for submission (equipment setting out, utility requirement, equipment elevation views…).
• Coordination of the company internal resources (project, service, logistics…) and external parties (sub contractors, main contract) to ensure smooth project implementation.
• Conduct side surveys, technical assessments and feasibility studies.
• Monitor project progress and adjust plans as necessary.
• Ensure compliance with safety regulations, quality standards and company installation requirements.
• Provide technical support and troubleshooting during installation.

Requirements:

• Bachelor’s degree in Engineering, Construction Management, or related field.
• WSQ Workplace Safety and Health Management in Construction Industry - WSHMCI (Formerly known as WSQ SCWWSH, MOM BCSS)
• Experience in project engineering, preferably in the medical device industry.
• Excellent communication and teamwork abilities.
• Strong analytical and problem-solving skills.
• Proficiency in project management software and tools.

About the Role:
Are you passionate about ensuring the delivery of high-quality, impactful solutions? As a QA Engineer, you’ll play a critical role in transforming personalized healthcare by ensuring our cutting-edge AI and telehealth solutions meet the highest standards. Working closely with our Head of Engineering and a dynamic team, you’ll design and execute rigorous testing processes to support the development of game-changing healthcare technology for Asia.

This isn’t just about testing—it’s about building the future of healthcare. From ensuring the scalability of AI-driven relationship management to verifying personalized health insights and tailored treatments, you’ll help redefine what’s possible in telehealth.

Why Join Us?
This is more than just a job—it’s a mission. While there may be trade-offs in compensation, we offer the chance to be part of something transformative. You’ll take ownership of QA processes for impactful projects, working with a passionate team dedicated to using technology and innovation to change lives.

What You’ll Do:

• Review quality specifications and technical design documents to provide timely and meaningful feedback.
• Develop and maintain detailed, comprehensive, and well-structured test plans and test cases.
• Estimate, prioritize, plan, and coordinate quality testing activities across our engineering projects.
• Design and execute manual and automated test cases to validate AI and telehealth solutions.
• Identify, document, and track software defects to resolution, ensuring timely fixes.
• Collaborate with developers and the Head of Engineering to ensure seamless integration of QA processes into the development lifecycle.
• Continuously improve QA processes, tools, and techniques to support scalable, high-quality solutions.

Who You Are:

• You are passionate about delivering high-quality solutions that make a meaningful difference.
• You have experience in developing and executing manual and automated test cases.
• You’re skilled in reviewing technical design documents and creating test plans and cases.
• You’re familiar with QA tools, methodologies, and frameworks.
• You thrive in fast-paced, high-growth environments and enjoy building solutions from scratch.
• You have strong analytical and problem-solving skills and are detail-oriented.
• Experience in healthcare data or applications is a plus but not mandatory.

What We Offer:

• The chance to work on meaningful projects that transform healthcare in Asia.
• A collaborative and innovative team culture where your contributions matter.
• Ownership over impactful QA projects with the freedom to shape testing strategies.
• Flexibility to work remotely with occasional travel across Asia to collaborate with the team.
• An opportunity to join a mission-driven team passionate about making a real difference in healthcare.

Why Join Us?

• Impact: Play a pivotal role in ensuring the quality of transformative healthcare solutions.
• Ownership: Full responsibility over QA processes and the freedom to shape testing methodologies.
• Flexibility: Work remotely, with opportunities for travel across Asia.
• Mission-Driven: Join a team passionate about changing lives through technology and innovation.

Join us, and let’s redefine healthcare together.

Job Requirement

1. Minimum Bachelor degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Please email your resume to [email protected]

Location: Jurong West Area

Job Description:

. Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil/Mechanical Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

Job Description:

. Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil/Mechanical Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.