We are seeking a highly skilled and experienced Design Engineer to join our Design team. The successful candidate will be responsible for designing and developing custom mechanical systems and components for Asphalt and Concrete plants, as well as overseeing their fabrication and testing.

Responsibilities:

• Design and develop custom mechanical systems and components using CAD software (e.g. SolidWorks, Inventor, Creo)
• Collaborate with cross-functional teams, including Electrical and Software Engineers, Project managers, and Fabrication Technicians, to ensure successful project outcomes.
• Oversee the fabrication and testing of mechanical systems and components
• Develop and maintain project timelines and budgets.
• Perform research and analysis on materials, components, and systems to ensure optimal performance and cost-effectiveness.
• Participate in project meetings and provide technical expertise and guidance as needed.
• Ensure compliance with all relevant safety regulations and standards.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 8 years experience in mechanical design and fabrication
• Proficiency in CAD software (SolidWorks preferred)
• Strong knowledge of mechanical design principles and practices
• Experience with the design and fabrication of complex mechanical systems and components
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal skills and the ability to converse and write in English.
• Ability to work independently as well as part of a team.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 5 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 4 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

Job Descriptions:

* Development & Implementation of IoT Application, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Implementation of IoT, Robotics, Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in IoT implementation

* Knowledge of Building Automation & Process Control

* Experience in IoT, BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in embeded programming, Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

* Willing to travel to overseas on short notice and work after office hour, weekend and public holiday.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Roles and Responsibilities:

• Responsible for preparation and delivery of process calculations, design drawings and other documents for water, wastewater treatment, and air treatment projects.
• Aware the requirements for full compliance to local authorities
• Conduct process calculations such as treatment unit sizing, pipe or ducting pressure losses for above mentioned projects.
• Design PFD, P&ID drawings for these projects.
• Select equipment or propose the parameters for selection of equipment such as pumps, fans.
• Design the layout and section views of the overall treatment system including process treatment units, equipment, and pipings and ductings with the help of drafters.
• Prepare other textual documents in process discipline such as control philosophy, datasheets.
• Evaluate technical documents from subcontractors and suppliers.
• Coordinate the works with mechanical engineers, and electrical, control and instrument engineers.
• Provide technical support to sales and project teams.
• Develop or provide design recommendations, value engineering and training to clients or co-workers
• Liaising with other departments (Project, QAQC or Commissioning) on schedule and deliverables timeline.
• Report to engineering manager.

Requirements:

• A recognized degree in environmental engineering, chemical engineering, mechanical engineering, or all other process related engineering.
• 3 years above work experience in water, wastewater treatment, or air treatment.
• Master degree holders with less experience will be considered.
• Proficiency in CAD, MS office or other design softwares.  Strong analytical and problem solving, critical thinking skills.
• Experiences in ultrapure water treatment, air treatment scrubbers, and thermal oxidizers are preferred.
• Good writing and communication skills.

• Manage & develop new customers based for spare part sales in the industrial, Marine & Offshore/Oil Gas market.
• Responsible for maintaining a high standard level of customer services and good customer relation.
• Responsible for maximizing a high level of profit margin and ensure meeting the pre-set sales target.
• Executing sales & marketing strategies to maximize opportunities in both domestic and international markets.
• Make sales presentation and provide technical support to customer
• Gather information on market demand, competition and latest technologies.
• Submission of weekly, monthly and quarterly reports.

The Senior Infrastructure Engineer is responsible to develop software based on design requirements and ensure software and subroutines are working to specification, program codes have conformed to standards and are delivered with quality meeting schedule and requirements. He will also implement systems in accordance to specifications & service level. Where relevant, perform the necessary system programming & configuration.

• Develop, test, and deploy scalable, secure, and high-performance web applications using Microsoft .Net framework, C#.Net, and ASP.Net

• Design and implement database solutions utilizing MS SQL Server and TSQL, ensuring optimal performance and data integrity

• Collaborate with cross-functional teams to gather requirements, analyze user needs, and translate business requirements into technical specifications

• Troubleshoot and debug issues in existing software applications, providing timely resolutions and enhancements

• Stay updated with industry trends and best practices, continuously enhancing technical expertise and contributing to the improvement of development processes

• Support existing applications and report generation

Required Skills:

• Bachelor’s degree in computer science, Engineering, or a related field

• At least 2 years of relevant experience in software development using .Net technologies

• Proficiency in Microsoft .Net framework, C#.Net, ASP.Net, and web technologies

• Strong experience in developing and optimizing database solutions using MS SQL Server and TSQL

• Solid understanding of software development methodologies, object-oriented programming principles, and design patterns

• Excellent problem-solving skills

• Effective communication and teamwork abilities.

Good to Have:

• Familiarity with PowerShell scripting for automation and system administration tasks

• Experience with Microsoft 365 (M365) platform and integration

• Knowledge of cloud platforms (e.g., Azure, AWS) and services

• Knowledge of google workspace.

We are seeking an Electric System Design Engineer to design hydraulic and electric systems for Ro-Ro equipment. As a key team member, you will be responsible for developing high-performance systems that meet safety, regulatory, and operational requirements in Marine Industry. Fresh graduates from Electrical, Mechatronics, or Mechanical Engineering backgrounds are encouraged to apply, as we provide training and development opportunities to enhance your skills.

Qualifications:

• Bachelor’s degree or higher in Electrical, Mechatronics or Mechanical Engineering.
• Strong problem-solving skills and active communication skills.
• Excellent interpersonal and collaboration skills.
• Experience in the design of hydraulic and electric system add value.
• Experience in both of Shipbuilding and Marine industry will be a significant plus.

ACMV Design/Site Engineer - Job Description

1. System Design: Create and optimise air-conditioning and mechanical ventilation systems, including load calculations and equipment selection.

2. Site Supervision: Oversee the installation, testing, and commissioning of ACMV systems on-site to ensure they meet design specifications and quality standards.

3. Technical Support: Provide on-site troubleshooting and technical guidance during construction, resolving any issues related to HVAC systems.

4. Regulatory Compliance: Ensure all designs and installations adhere to local and international codes and standards (e.g., ASHRAE,Green Mark).

5. Project Coordination: Collaborate with architects, contractors, and other stakeholders to ensure seamless integration of ACMV systems into the overall building design.

6. Client Communication: Interface with clients to address their needs, provide updates, and ensure satisfaction throughout the project lifecycle.

7. Minimum Requirements: Bachelor's degree in Mechanical Engineering, 3-5 years of experience in HVAC design and site supervision, proficiency in design and project management tools, and strong problem-solving skills.

ACMV Engineer Minimum Requirements

1. Education: Bachelor’s degree in Mechanical Engineering or related field; a diploma with extensive experience may be considered.

2. Professional Accreditation: Registration with the Professional Engineers Board (PEB) Singapore; Green Mark Accredited Professional (GMAP) is advantageous.

3. Experience: 3-5 years of relevant experience in HVAC or ACMV design, preferably within Singapore.

4. Technical Skills: Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP); strong understanding of Singapore's SS 553, SS 530, and SS 531 standards.

5. Regulatory Compliance: Knowledge of local building codes, fire safety regulations, and BCA standards, including Green Mark Certification requirements.

6. Soft Skills: Strong communication, problem-solving, and project management abilities.

7. Continuing Education: Commitment to Continuous Professional Development (CPD) as required by professional bodies like IES or PEB

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

• Provide technical advice to customers on pumps related inquiries.
• Selection of pumps based on the specification given by customers.
• Provide coordination support to Sales Engineers.
• Handle sales process from quotation to finished goods delivery.
• Handle walk-in customers.
• Work closely with customers and maintain good business relations.

Job Requirements:

• Min. Diploma in Mechanical Engineering or any Engineering background.
• A Meticulous and fast learner with good communication skills.
• Experience in pump industry is a plus.
• Fresh graduates are welcome to apply.

Overall Job Purpose

Responsible for configuring, implementing, and maintaining Project AVEVA Net/AIM and ISM instances. The incumbent will play a pivotal role in Project data capture, verification, and handover.

Core Responsibilities

• Be the Single Point of Contact for all matters related to setting up, maintaining, administering, upgrading, and troubleshooting the AVEVA NET system deployed on all MODEC

• Coordinate with the engineering disciplines assigned to the project and work closely with project management, procurement, HSE, QA/QC, operations, and the construction team. Meet or, where possible, exceed on-time deliverables while maintaining quality and safety in each activity.

• Establish and maintain the creation of a Class Library and define its structure and mapping techniques in ISM.

• Develop efficient data capture, validation, loading and handover work processes to meet Client/Project schedule requirements.

• Establish new project portals that effectively reflect client/project class libraries, data structure, and handover requirements.

• Ongoing Gateway configuration, maintenance, and development of AVEVA NET portals.

• Generation of Query Forms, SSRS and BI reports communicating data discrepancies, omissions, completion trending and status

• Raise the profile of information management and create a data-centric culture via effective portal development and deployment.

• Shall be capable of developing work instructions for users of AVEVA NET.

• Must understand company goals and implement management directives and policies.

• Anticipate potential problems and take preventive actions.

• Support the Product Manager in planning and delivering AVEVA NET solutions on projects.

• Shall train the MODEC users on the AVEVA NET application in projects.

• Interface with all disciplines to clarify/explain AVEVA NET intent and suggest alternatives when

• Contribute to continuous improvement of company work methodology/procedures.

• Conclude all open issues amicably.

Educational Qualification:

Certification(s):

• Training in AVEVA NET administration

Relevant Experience:

a) 5-10 years’ experience applying AVEVA NET in onshore/offshore Oil & Gas areas or FPSO line(s).

b) AVEVA NET/AIM and AVEVA ISM administration and implementation.

c) Be fully proficient in exception handling between the AVEVA system with associated Gateways and the Client system

d) Have extensive knowledge of AVEVA registers gateway interface with Client system

e) Experience in mapping Company data and document structures to Client structures. Have an in-depth understanding of FEED & Detailed Design deliverables, their execution methodology and their interdependencies with one another.

f) Have previous experience in engineering information management.

g) Possess previous experience with AVEVA Net Portal and ISM development and administration skills on Oil & Gas Projects, specifically for Major Capital Projects.

h) Knowledge of Engineering Design software like AVEVA E3D and AVEVA Engineering is a plus.

i) Possesses good working knowledge of the Oil & Gas Industry, including EPCs and owner-operators (preferred but not mandatory).

j) Shows evidence of good organizational skills.

k) Demonstrates ability to take the lead.

l) Good communication skills.

m) Commitment to take responsibility.

Job Description

• Co-ordination and supervision of M&E works
• Liaise with M&E Consultants
• Ascertain and make provision for all M&E and building services in collaboration with the project staff
• Monitor progress, quality of workmanship and compliance with authority requirements.
• Highlight and advise the project staff on the interfacing of M&E services and the building works
• Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission
• Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission
• Attend to technical clarifications as and when required to address technical issues and establish method statements
• Project Management and sites supervision works.
• Able to coordinate with contractors and consultants for engineering issues and drawing plans.
• Perform all duties in accordance with company policies, processes, systems and procedures.

Job Requirements:

• Minimum 8 years of engineering experience with recognised Degree in relevant field
• At least 5 years of supervision experience of E&M work in the construction site for projects of similar scale, complexity and nature of work
• Candidate must have LTA/ MRT/ rail projects background

Job Description & Requirements

Candidate must possess at least Diploma/ Dgree in Engineering (Electrical)

• Preferable with 2 Year(s) of working experience in the related field is required for this position.
• Entry level candidates are welcome to apply.
• Preferably Junior Executive specialized in Engineering - Electrical or equivalent.
• 6 days work week.
• Good interpersonal and communication skills.
• Rotating shift

Responsibilities:

• Responsible for all works related to Project Engineer duties
• Able to prepare shop drawings, as built drawings of electrical services
• Able to visualize site condition and make necessary proposal
• Will need to assist in other department

• Assists the Project Manager in managing and supervising the execution of production works and ensuring the delivery of assigned projects
• Assists the Project Manager in planning and prioritising the order of works and work methodology
• Liaises with the project team to allocate adequate manpower and equipment resources
• Monitors work progress on board vessels and in workshops
• Conducts production meetings between Yard’s subcontractors, supervisor and ship’s staff to clarify work scope, co-ordinate sequence of work, update schedules and other contractual matters, as and when required
• Ensures works are carried out according to the job specifications in terms of quantity, quality and meeting Class/Owner requirements by developing test plans and arranging for inspection and survey for the Superintendents and Classification
• Completes the process of mechanical completion and commissioning scope of work
• Any other associated tasks and responsibilities assigned from time to time

Requirements:

• Bachelor's Degree in Marine Engineering, Shipbuilding, Naval Architecture, Mechanical Engineering or relevant apprenticeship training in a marine trade
• Knowledge of various workshops dealing with specialised works in the industry
• Able to perform scheduled night duties when required
• Attend to vessel’s needs during weekends and public holidays
• Travel within the country or abroad for ship check
• Good knowledge of marine industry skills in any discipline
• Knowledge in Hull,Mechanical, Piping & Electrical will be advantageous
• Good planning,organization, control, problem-solving, interpersonal and communication skills
• Good knowledge of project management software and other planning softwares

Our Address:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Our Working Hours:

Mon – Thurs: 8:00am – 5:15pm

Fri: 8:00am – 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Supporting the Mechanical maintenance team, you will be responsible for the effective maintenance plant and equipment to achieve high reliability and availability in accordance with statutory, regulatory and safety requirement.

Responsibilities

• Perform scheduled plant inspection according to maintenance regime as well as ensuring that our gas plant, auxiliaries and common systems are maintained according to SOPs, and in compliance with regulations and requirements and in a safe manner.
• Coordination of all Mechanical Maintenance programmes (PM & CM)
• Manage and optimize all planned plant/equipment maintenance activities during minor and major overhauls and inspections.
• Responsible for the functional tests and analyse the failures related to mechanical systems and components and recommends corrective actions to prevent re-occurrence. Troubleshooting of faults/defects issues & carry out failure analysis.
• Study, evaluate and implement plant improvement projects to enhance overall plant reliability, availability and performance
• Execute approved plant improvement works
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Prepare technical specifications for equipment parts and work services. Manage the procurement of parts and services to meet the maintenance needs
• Track the year to date expenditure against the approved department budget
• Manage a team effectively through day-to-day activities.

Requirements

• Degree in Mechanical Engineering or equivalent recognized by the Professional Engineers Board.
• At least 15 years of relevant working experience in plant maintenance from the Power or Oil and Gas industries.
• Sound Mechanical engineering maintenance knowledge. Good knowledge of safety and statutory requirement will be an advantage.
• Self-motivated team player with analytical mind, strong planning and problem solving skills.
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Job Descriptions:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist for tender team.
• Research on the application and construction technology of new materials.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Calculation and design optimization of offshore photovoltaic structures.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Report on work progress during meetings.

Job Requirements:

• Preferably with a Degree in Engineering or related studies.
• Tender experience is preferable.
• Minimum 6 years of design engineering experience.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Act as team player.

JOB DUTIES :

• Design precision plastic injection molds according to requirements.
• Construct design layout and mold design review meeting.
• Communicate with customers in conference calls and on-site design meeting.
• Perform other duties as assigned.
• Required to develop junior engineers.

EXPERIENCE REQUIRED:

• Minimum 7 years relevant working experience
• Minimum Diploma in precision/ mechanical/ manufacturing engineering.
• Proficient in Siemens NX software and Microsoft office applications
• Strong leadership skills. Has positive attitude towards work and eager to learn new skills

Job Description Summary

All activities relating to enhancing services technology integrating customer data, or capturing engines/products reliability, availability, maintenance, safety and other performance parameters. Includes hourly, nonexempt and exempt employees as well as manager roles responsible solely for these activities. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures. Some judgment may be required but this is typically with guidance.

Roles and Responsibilities

• Development of repair and inspection technologies, process qualification, industrialization. Related program deliverables to repair facilities for new and updated processes.
• Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.
• In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.
• Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisions.
• A job at this level is likely to be an individual contributor with proven interpersonal skills or an early people leader who can hire and develop talent. Provides informal guidance to new team members

Required Qualifications

• Advanced experience in the Engineering/Technology & Repair Development. Knowledge level is comparable to a Bachelor's degree from an accredited university or college ( or a high school diploma with relevant experience).

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage