General Description

• Responsible as Operation’s facility engineer for the development of Terminal’s new LNG Trucking facility. Incumbent shall support the Project team, ensure the Operability & Maintainability aspects of the new facility are taken care during engineering, design and construction phases. Incumbent shall also develop and execute “Ready to Operate” plans for the facility;
• Incumbent shall work closely as a team with Production Shift Teams, Maintenance Team and other Process Engineers providing process engineering expertise ensuring the Terminal and Trucking facilities operates safely, reliably and efficiently;
• Incumbent shall liaise closely with Commercial team to ensure the Terminal delivers the required services, inclusive of Jetty Operations, Gas supply and Trucking are incompliance to regulations, procedures and contractual agreements

Roles & Responsibilities

The incumbent roles include but not limited to following scope of tasks and duties:

• Evaluate operations activities, make recommendations and execute continuous process improvements in the areas of operational excellence;
• Recruit, train and supervise the Trucking Technicians assigned for operating the Trucking Facility.
• Lead troubleshooting, inspections, reviews and investigations of equipment or process system to support optimisation, drive root cause analysis and formulate remedial resolution. Incumbent shall also investigate Customer’s complaints related to equipment and process systems;
• Review the adequacy of standard operating procedures(SOP) to ensure safe and reliable operations with operational design limitations, includes commissioning, operations and maintenance phases of facilities;
• Provide specific instructions to Production Shift Teams, Maintenance Team, Trucking Team and Laboratory on LNG transfer operations, trucking, stowage plans and samplings requirements;
• Liaise with stakeholders in ensuring LNG surveyor’s reports, certificates of quality are accurate and consistent as per the procedures;
• Diligently review maintenance plans, method statements and risk assessment on the process safety aspects for the maintenance work related to the assigned equipment and systems;
• Compile data and measure Terminal’s performance including service availability and efficiency;
• Undertake alarm management for assigned area and proactively drive alarms analysis to ensure robust operations;
• Take lead role for Management of Change(MOC) for facilities modification, as required;
• Participate in reviews and evaluations such as HAZID, HAZOP, FMEA, SPF, 3D models, Safety Integrity Level, RAM analysis, design layout and process safety requirement in alignment with regulatory and business objectives;
• Report HSSE near miss/violation. Take an active role in HSSE activities and green initiatives;
• Assigned specific role and responsibility in emergency response;

Work Experience

• Minimum of eight (8) years work experience in process engineering function in an oil, gas and petrochemical facilities, complex utility, cryogenic or trucking facilities;
• Conversant with local/international codes, regulations, standards, best practices, equipment inspection and schedule requirements;
• Knowledge of installation, commissioning, start-up, maintenance and troubleshooting of processes system in oil, gas or petrochemical industry;
• Knowledge of Process Safety Management, Electrical, Instrumentation, Controls or Mechanical systems;
• Experience in Process Simulation (e.g. Hysys/Unisim or equivalent), Design Softwares(e.g. Fisher Specification Manager, Hydraulics, PSV sizing) or other related process software an advantage;
• Experience in Engineering design analysis including preliminary design development, heat and mass balance calculation, technology evaluation and equipment selection preferred;
• Experience in dealing with consultants and contractors involved in the Oil & Gas sector, including external agencies, utilities and government organizations;
• Basic knowledge of ship-shore interface and cryogenic transfer operations an advantage;
• Capable of lead and guide technicians ensuring the works are executed safely and effectively;

Education

• Incumbent must possess a Degree in Chemical Engineering from a recognised university.
• Process Engineering background with Mechanical and Instruments knowledge.

Primary Purpose

Functions as a technical specialist in water / wastewater treatment process. Performs all aspects of conventional design engineering and analysis independently. Broadens knowledge and skill set in area of discipline. Knowledge in other disciplines and/or functional areas.

Roles & Responsibilities

• Detailed design of process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants, sludge treatment plants, desalination process, etc.
• Detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems.
• Preparation of Process Flow Diagrams and P&IDs.
• General Arrangement and equipment layout drawings.
• Preparation of process equipment specifications.
• Review and evaluation of vendor submissions.
• Coordination with other disciplines e.g. civil, structural, electrical, mechanical, building services, instrumentation & control designers and digital water specialists.
• Able to lead meetings, HAZOP, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Prepare testing and commissioning plans
• Process Testing & Commissioning
• Keeping abreast with latest development in water treatment technology and suitably applies in the design

Candidate shall have minimum of 12 years’ experience in the process design of water / wastewater treatment (municipal and industrial) with the following attributes:

1. Degree in Chemical or Environmental Engineering.
2. Expertise in water / wastewater treatment process modeling and optimization (including biological treatment).
3. Proficient in BioWin/GPS-X/SUMO or other wastewater modelling software.
4. Possess knowledge of wastewater treatment processes such as Activated Sludge, SBR, MBR & MBBR/IFAS.
5. Experience in preparing PFDs/P&IDs and specifications for procurement of water and wastewater process equipment.
6. Proven ability to manage diverse and large scale water projects, prioritize tasks, effectively.
7. Utilize available resources and ensure timely completion of projects.
   Proficient in written and oral communication with good interpersonal skills.

Position Overview:

You would be part of a dynamic digital SoC design team that develops state-of-the-art video processing, neural processing, advanced video analytics accelerators, and the entire Camera Processor SoC. You would be joining the team to explore, evaluate and define innovative design SoC architectures, to meet or exceed the technical requirements of the SoC. You would be responsible for the successful implementation of the designs in Verilog/SystemVerilog coding, metrics measurement to meet key objectives & results, and follow-through in comprehensive verifications to successful silicon.

Requirements:

1. Experience in SoC architecture and design, and RTL coding with Verilog/SystemVerilog

2. Experience in ARM, RISC processor system

3. Experience in embedded C and assembly code programming

4. Experience in analysis of power, timing and area

5. Experience in at least one of scripting languages (e.g. Perl, Python, TCL, or Bash)

6. Disciplined, quality-minded, and highly driven for excellence

7. Excellent team player and good communication skills

8. MSEE/BSEE in Electrical Engineering or Computer Engineering

9. Candidates with relevant experiences would be offered as Staff, taking on higher responsibilities

10. Experience in always-on system, automotive system, secured system, bus interconnect, neural processing, video processing and video analytics is a plus

11. Experience in system modelling and simulation using emulator and SystemC is a plus

12. Passionate and strong in general programming is a plus

MacGregor shapes the offshore and marine industries by offering world-leading engineering solutions and services with a strong portfolio of MacGregor, Hatlapa, Porsgrunn, Pusnes and Triplex brands. Shipbuilders, owners and operators are able to optimise the lifetime profitability, safety, reliability and environmental sustainability of their operations by working in close cooperation with us.

Purpose of the position

As a Service Engineer with expertise in steel work, you will be responsible for supervising the structural steel repairs, including welding, fabrication, and modifications on Roll-on/Roll-off (RoRo) vessels and hatch covers on container vessels and bulk carriers. You will ensure that all steelwork adheres to industry standards and vessel safety regulations, while leading a team of engineers and subcontractors.

This role requires in-depth knowledge of steel structures and the

capability to manage projects efficiently and safely, ensuring high-quality service for MacGregor and third-party products when necessary

Main tasks and responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades on MacGregor equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety,and Environmental (QHSE) standards and site-specific safety protocols.

What you’ll need to succeed

Education:

• Diploma in Marine Engineering or an equivalent technical qualification in mechanical, marine, or steel fabrication fields.
• Engineering graduates are encouraged to apply.

Experience:

• Minimum of 5 years’ experience in supervising steelwork, particularly with RoRo/Hatch Cover systems or in marine environments.
• Strong background in mechanical, hydraulic, and steel structures is essential.
• Experience working in ports,onboard ships, and offshore environments is preferred

Skills & Competencies:

• Proficient in welding and steel fabrication techniques, with supervisory
• experience.
• Strong problem-solving abilities and the capability to lead teams and manage projects independently.
• Fluent in English; multilingual skills are an asset.
• Ability to perform under pressure and adapt to changing circumstances.

You will be part of

We offer you an opportunity to put your skills and experience into work and make an impact in our global organisation and the marine industry. You will work together with great colleagues from various backgrounds inspired by shared, ambitious goals. We value collaboration in our open and inclusive culture. With us, you will have the opportunity to develop yourself professionally. Join us to make a difference - and have fun while doing it.

Mandatory Skills

Job Description:

The suitable candidate will join a team of engineers and operations specialists in the support of DBS’ enterprise privileged access management infrastructure and operations. He/She will be responsible for the end to end design, deployment, operations and development of the bank’s privileged access management framework, infrastructure and processes.

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privileged accounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

NextLabs, a Silicon Valley technology company, is offering an exciting opportunity to software engineers to participate in the development of next generation information management products.

NextLabs is the leading provider of policy-driven information risk management software for large enterprises. NextLabs’ solutions automate the enforcement of security controls and compliance policies to secure information and enable secure information sharing across the extended enterprise. NextLabs has some of the largest global enterprises as customers and has strategic relationships with many industry leaders. For more information on NextLabs, please visit https://www.nextlabs.com.

We are looking for Web-PHP/Python developers with strong font-end programming experiences in joining our engineering team in developing applications for supporting our global IT and business operations.

Responsibilities:

• Write well designed, testable, efficient, reusable and maintainable code
• Develop web application frontend/user interface in Angular framework.
• Develop interaction with backend REST services
• Collaborate with web designers to match visual design intent
• Stay up-to-date with emerging technologies/industry trends and apply them into operations and activities.

Requirements:

• Possess at least a Bachelor's Degree in computer science or a related field.
• Proven working experience in JavaScript, HTML and CSS
• A strong understanding of how web applications work including security, session management, and best development practices.
• Solid understanding of SPA, PWA, material design, responsive design and OOP concept
• Solid working knowledge of Bootstrap/Flexbox and Angular.js/Angular 7+ is huge advantage
• Good knowledge of working with REST API and complex JSON data is a plus
• Good problem diagnosis and creative problem-solving skills.
• Ability to work and thrive in a fast-paced environment, learn rapidly and master diverse web technologies and techniques.
• Experience working remotely with global team is a plus
• Experience working with Java backend is a plus
• Prior working experience with PHP, JSP, JSF or any other frontend framework are welcome

Interested candidates may send resume to [email protected] or use our online form.

Job Description:

1. Oversee and manage building construction projects from planning to completion.

2. Ensure compliance with building codes, regulations, and industry standards.

3. Collaborate with architects, engineers, contractors, and stakeholders to resolve design and construction issues.

4. Conduct site inspections to monitor progress, quality, and safety.

5. Develop and manage project budgets, schedules, and resources.

6. Coordinate with contractors and suppliers to ensure timely delivery of materials and services.

7. Troubleshoot and resolve construction-related problems and disputes.

8. Ensure environmental sustainability and energy efficiency in building design and construction.

Requirements:

1. Qualifications: Bachelor's or Master's degree in Civil Engineering, Construction Engineering, or related field.

2. Experience: Minimum 5+ years of experience in building construction, engineering, or a related field.

3. Certifications: Professional Engineer (PE) license or equivalent; LEED AP or other sustainability certifications are a plus.

4. Skills:

- Strong knowledge of building codes, regulations, and industry standards.

- Excellent project management, leadership, and communication skills.

- Proficiency in construction management software, such as Procore, Autodesk, or Oracle.

- Strong problem-solving and analytical skills.

5. Soft Skills:

- Strong interpersonal and communication skills.

- Ability to work collaboratively in a fast-paced environment.

- Strategic thinking and business development skills.

- Adaptability and flexibility in a rapidly changing environment.

Job Description:

• Update and control of Mechanical Engineering specification,procedure and drawings in CMMS (Computerized maintenance management system).
• Register, control and maintenance of assets management in CMMS.
• Material Management including consumables,parts and spare units in CMMS.
• Respond to breakdowns, diagnosing faults, record and report in CMMS.
• Review and approve of service, repair and overhaul equipment, record and report.
• Managing staff “shift or on-call' work as necessary.
• Planning and supervising scheduled maintenance, improvement and investment works.
• Contract and evaluation of cost including technical proposal on improvement and investment works.
• Managing vendors, suppliers and contractors including performance appraisal.
• Managing staff KPI (Key Performance Indicator), appraisal and training plan.
• Ensuring compliance with machinery and equipment statutory requirements.
• Ensuring compliance with QEHS (Quality, Environment, Health and Safety) legislation.
• Managing routine 5S at the maintenance workshop, store and work area at site.
• Provide training to Supervisors and Technicians if needed.
• Responsible for maintaining and improving availability of rotating equipment across the Plant.
• Develop and ensure data quality for documents uploaded in the CMMS.
• Develop Mean Time Between Failure, Mean Time to Repair, Failure Mode Effect Analysis template for rotating equipment and implement it.
• Develop and monitor the performance of the rotating equipment.
• Deliver quick and effective technical solutions and proactively interface with other discipline leads for resolving issues.
• Identify bad actors in the plant and reliability improvement.
• Initiate the engineering management of change and execute the changes for plant improvement and modification work.
• Develop and maintain Standard Operating Procedures and Risk Assessments for the maintenance of rotating equipment.
• Planning and execution of all rotating equipment preventive and corrective maintenance.
• Condition monitoring of rotating equipment through online and offline vibration analysis, oil analysis and other techniques.
• Develop training plans for Operations & Maintenance Teams.
• Prepare estimates and budgets for rotating equipment.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group

Job Requirements:

• Degree or Diploma in Mechanical Engineering or Maintenance Reliability Engineering field.
• At least 6 years of working experience in engineering with EPC/EPCM contractors or in Operation & Maintenance in the Oil, Petrol or Chemical plant or similar.
• Knowledge in Refractory repair work is an advantage.
• Strong desire to work in a leading edge industrial environment with a strong focus on reliability and efficiency.
• Strong Verbal and written communication skills.
• Proficient in Computer Skills such as Microsoft Office, Microsoft Project, Auto Cad, CMMS, etc.
• Able to work independently and in a team to achieve departmental goal of lean production.
• Knowledge of Maintenance and Asset Management is an advantage.
• Good knowledge of industrial standards such as API, ASME etc.
• 
  

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Job Description:

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements
• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards
• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products
• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager
• Support safety related administrative functions
• Conduct failure investigation and prepares reports for problems or issues based on findings from facts, research, studies and makes necessary recommendations and submits to relevant authority for approval
• Prepare and studies technical drawings, specifications of mechanical systems inclusive of engine, transmission, powerpack and driveline, and scopes of work to ensure (Maintenance, Repair and Overhaul) MRO operations conform to standards and customer requirements
• Document work procedures based on technical requirements for the MRO components
• Analyse and interpret test information to resolve repaired related problems
• Design, maintain, service and implement components so to be able to integrate into in-service systems, and interpret specifications and mechanical drawings for any re-engineering work required
• Responsible include training technicians; planning, assigning, and directing work to a group of technicians; appraising addressing complaints and resolving problems
• Appoint to be lead for a Platform to ensure the MRO Component serviceability is met at all times
• Perform literature searches on the subject area for MRO in Mechanical System especially in engine and transmission
• Assist in providing technology solutions to overcome more complex MRO systems so to allow work focuses upon the effective integration of people, processes, tools and technology in order to improve the MRO into the next level

Job Requirements:

• Degree/ Diploma in Mechanical Engineering with 2 year of working experience related to Automotive fields or MRO Services
• Certified Reliability Engineer will be an added advantage
• Able to read and understand mechanical drawings
• Possess good interpersonal skills and strong ability to work within a team
• Good interpersonal & communication skills
• Ability to present ideas, approach and objectives clearly
• Work under pressure, independent and self-motivated
• Good listener, and able to understand customers problem or question and help them solve it
• Customer orientated
• Good analytical and problem solving skills
• Good communication skills and a strong team player
• Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Job Responsibilities:

• To develop E&I shop drawings based on client given information, specifications, calculations
• Able to make revisions and incorporate comments made by clients
• Make the drawings in keeping with Company standards
• To provide MTO based on drawing details
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/Leads
• Explain drawings to production or construction teams and provide adjustments as necessary
• Must be able to work in an environment with schedules and priorities
• Hands on knowledge on Auto-cad is essential

Job Requirements:

• Diploma/Bachelor Degree in Electrical Engineering or equivalent
• Hands on AutoCAD knowledge
• Able to work in an environment with tight schedules and priorities

• Marine & Offshore industry
• Basic $3000 - $4200
• 5 days (8.30am – 6.00pm)
• Location: West Area
• Transport provided from Jurong East, CCK, Serangoon, Bishan

Responsibilities

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).

Qualifications

• Min Diploma/ Degree in Electrical with no working experience are also welcome.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description & Requirements:

As a Frontend Engineer, you will be responsible for architecting and developing efficient, reusable, and visually appealing frontend systems for a trading application powered by AI models and LLMs. You'll work closely with cross-functional teams, including backend engineers, AI engineers, product managers, UI/UX designers, and the product design team to deliver a responsive, engaging user experience across web and mobile platforms. Your expertise will ensure a seamless blend of aesthetic and functionality.

Key Responsibilities:

• Architect, design, and develop efficient and reusable frontend systems (Web/Mobile)
• Collaborate with backend engineers, AI engineers, UI/UX designers, product managers, and other stakeholders to build comprehensive, architecturally sound, and visually appealing frontend solutions
• Optimize code to improve scalability, reliability, security, and performance of web and mobile applications
• Design interactive components, especially for chat-based and generative UI, to create dynamic LLM-powered user experiences
• Write comprehensive tests for all developed features to maintain software quality and reliability
• Documentation of design and architecture.

Qualification & Skills:

• Minimum 6 years of professional experience as a Frontend Engineer
• Expert in HTML5 / CSS3 / ECMAScript 6 + / TypeScript. Strong preference for candidates experienced with Tailwind CSS
• Proficient in modern frontend frameworks, including React and Vue, and/or React Native for mobile
• Skilled in state management tools such as Redux, Pinia
• Experience with API design principles, RESTful API integration and familiar with React Query
• Strong understanding of client-side performance, optimization.
• Deep knowledge of scalability, reliability, and security considerations in modern web development.
• Familiarity with LLM application development and generative UI/interactive components, particularly for chat-based applications
• Excellent collaboration and communication skills to work effectively across teams

• World-leading provider of cargo and load handling equipment (MNC)
• Basic $4,000 - $6,000
• Allowances + OT payable
• Office location: Jurong East-International Business Park

Responsibilities

• Steel Work Supervision: Supervise structural steel repairs, including welding, fabrication, and modifications on RoRo vessels, container vessels, and bulk carriers, ensuring compliance with industry and safety standards.
• Maintenance: Perform preventative maintenance, corrective actions, and upgrades equipment, including RoRo ramps, doors, and hatches.
• Inspections: Conduct thorough inspections of steel structures and mechanical systems to ensure compliance with safety and quality standards.
• Project Management: Lead and manage subcontractors during larger steel repair projects, ensuring the work is completed on time and within budget.
• Customer Support: Establish and maintain excellent relationships with internal and external customers, providing technical support and feedback to the relevant teams.
• Safety Compliance: Adhere to all Quality, Health, Safety, and Environmental (QHSE) standards and site-specific safety protocols.

Requirements

• Min with technical qualification in steel fabrication, marine or other relevant engineering fields.
• Min 2-3 years working experience in supervising steelworks or marine industry.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

• Supporting project communication systems Installation, Configuration, Integration and Testing at customer site to ensure timely project delivery.
• Working closely with subcontractors to ensure tasks on site are completed on schedule.
• Understanding the system and be able to perform system fault isolation and troubleshooting.
• Collaborating with fellow engineers / engineering team in system setup, system validation and problem resolution.
• Supporting the generation of project documentation

Requirements

Primary Work Location: Jurong East Hub

Working Hours : 8.30am – 6pm

Qualification : Diploma in Mechatronic, Mechanical, Electrical & Electronic

Tasks and Responsibilities

• Assist Section Project Lead in day to day operations.
• Perform the assigned mechanical task under quality and schedule.
• Advise the project’s design mode & standard
• Familiar with Class regulation/rules, product, standard
• Report the project daily discipline (Man-hour/Schedule etc.)
• Able to work with other team members for the overall progress of the project
• Feedback for profession’s design mode & standard
• Train & Guide the other project mechanical engineer (AE or draft man) to work together.
• Study & Solve the project issues under mechanical responsibility
• Attend and report in project and section meeting
• Complete the assigned task for different project drawings or documents.
• Support Project Section Lead in Mechanical Technical issue.
• Coordinate with Shipyard /Consultant / Vendor
• Responsible to Mechanical Project Section Lead/ Mechanical Technical Lead
• Project Handling- New building project, Repair, Upgrading, Conversion project.

Job Requirements

• Minimum 5 years of relevant work experience in the marine/offshore industry Machinery/ Piping new-building engineering design.
• Familiar with Auto-CAD/ Microsoft Office/ AVEVA
• Familiar with Rules and Regulation from Classification Society and Authorities.
• Familiar with theory and calculation of marine/offshore Mechanical & Piping Design.

- Responsible of designing the Electrical system required to operate facility projects.

- Ensure smooth and proper execution of projects/contracts

- Supervision of construction works and co-ordinate with client’s representation, consultants and sub-contractors on technical issues

- Ensure quality of work is achieved and compliance of safety regulations

- Report schedule to Project Manager

- Attend site meeting with contractor on co-ordination and resolution of site problems.

- Must have good knowledge of generator electrical installation

Job Responsibilities

• Provide scheduling support to assigned projects
• Develop and maintain detailed project schedules using scheduling software (e.g., Primavera P6, Microsoft Project).
• Develop tender schedules and resource plans, ensuring competitive and achievable timelines.
• Participate in updating the master schedule and enterprise reporting.
• Perform critical path and float analysis to identify schedule risks and ensure on-time delivery.
• Coordinate with project managers, contractors, and other stakeholders to define the work breakdown structure (WBS), milestones, and deadlines.
• Ensure the schedule is aligned with the overall project goals and deadlines.
• Work with project teams to ensure resource allocation is properly reflected in the schedule.
• Collaborate with Engineering, Procurement, and Construction teams to ensure timely delivery of materials, equipment, and execution.
• Identify potential risks that could affect the project schedule and develop mitigation strategies.
• Ensure proper documentation of project-related activities, including variations, revisions, and decisions.
• Maintain a thorough record of project milestones, timelines, and any schedule-related issues or changes.
• Provide accurate schedule forecasts to project management and execution teams, helping inform deadlines and decision-making.
• Prepare concise schedule narratives describing the status of assigned projects
• Check compliance with company scheduling standard operating procedures
• Maintain quality assurance and control on assigned project schedules
• Perform technical data analysis and synthesize findings into resources for local and regional planning and policy documents.
• Present qualitative and quantitative findings utilizing oral, written, and graphic communication skills.
• Liaising with Project Manager to discuss the progress of the project and address any issues that arise
• Track jobs to ensure they will finish on time and within budget
• Prepare and submit status, performance reports. Comprehensive progress reports that detail progress measurements, S-Curve updates, productivity metrics, and variance analysis.
• Ensure that the reports accurately reflect project performance, identify any deviations from the planned schedule, and provide actionable insights for continuous improvement.
• Schedule shift according to E&C needs
• Monitor workforce and other resource productivity during project execution.
• Gather manpower report, equipment and raw materials needed to cover production demand

Job Requirements

• Degree in Engineering or equivalent
• Minimum 3 years relevant experience in the Petrochemical, Oil and Gas industry, of which at least 2 years have been performed as Planner / Scheduler
• Knowledge in Primavera P6 planning software packages. Relevant experience with resource loading and scheduling to produce progress status reports.
• Experience in actual construction is added advantage.
• Willing to work at the project site

Job Summary:

We are seeking a highly skilled Marine Structural Analysis Engineer to join our team. The successful candidate will be responsible for performing detailed structural analyses and design evaluations for various marine structures, ensuring safety, reliability, and compliance with industry standards and regulations.

Key Responsibilities:

• Perform structural analysis and design of marine structures including ships, offshore platforms, and subsea installations.
• Utilize advanced finite element analysis (FEA) tools and software to conduct stress, fatigue, and dynamic analyses.
• Develop and validate structural models to simulate and predict performance under various loading conditions.
• Collaborate with multidisciplinary teams to integrate structural analysis results into overall project designs.
• Prepare detailed technical reports, design documentation, and presentations for stakeholders.
• Ensure compliance with relevant industry codes, standards, and regulatory requirements.
• Participate in design reviews, risk assessments, and failure mode analysis.
• Provide technical support during the construction, installation, and operational phases of projects.
• Stay updated with the latest advancements in marine structural engineering and analysis methodologies.

Qualifications:

• Bachelor’s or Master’s degree in Civil Engineering, Structural Engineering, Naval Architecture, or a related field.
• Proven experience in structural analysis and design of marine structures.
• Proficiency in using FEA software such as ANSYS, ABAQUS, or equivalent.
• Strong understanding of marine structural codes and standards (e.g., DNV GL, ABS, ISO).
• Excellent analytical, problem-solving, and decision-making skills.
• Strong communication skills, both written and verbal, with the ability to present complex technical information clearly.
• Ability to work effectively in a team environment and manage multiple projects simultaneously.
• Professional Engineer (PE) license or Chartered Engineer (CEng) status is preferred but not required.

Preferred Skills:

• Experience with structural analysis of offshore wind turbines, oil & gas platforms, and subsea structures and marine vessels.
• Familiarity with software tools such as MATLAB, Python, or other programming languages for custom analysis and automation.
• Knowledge of marine construction techniques and materials.

What We Offer:

• Competitive salary and benefits package.
• Opportunities for professional development and career advancement.
• A dynamic and collaborative work environment.
• The chance to work on innovative and challenging projects in the marine industry.

Job Description

We are looking for multiple seasoned Senior and Staff Software Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Inference libraries, drivers and sample applications
• Boot ROM, RTOS/OS BSP and platform SDKs and sample application
• SoC IP programming models

Responsibilities:

• Develop various features of deliverables
• Solution profiling, optimization and benchmarking
• Support internal developers directly and customers through FAEs
• Ensure compliance as required e.g.ASPICE, MISRA C, Coverity, BlackDuck
• System architecture, verification and validation of ASIC IPs
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C design, implementation, optimization and debugging using GCC-like toolchains
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with
• Python for prototyping, demo, verification and/or automation
• OS: GNU/Linux, proprietary RTOS, Bare metal
• Processor architectures: ARM/RISC-V symmetric multiprocessing with cache & internal buses, SIMD, Vector Processing
• Debugging tools: gdb, simulators, emulators, JTAG, Oscilloscope, Logic Analyzers

Any of the following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.
• FPGA and hardware interfacing and debugging

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded development experience.

In this role, you will have the unique opportunity to engage in field service, site installation, and perform Quality check on all completed machines.

Job Responsibilities:

• Provide site machine installation and maintenance.

• Attend to service call.

• To conduct in-house and on-site training for customer.

• Investigate and handle customer's complaints.

• Quality check on all completed machines to ensure stringent quality compliance before delivery to customer.

Requirements:

• Diploma in Electrical or Mechatronics Engineering

• Minimum 2 years of field service or QA experience in Industrial Automation projects

• Ability to build strong relationships, work with customers to solve problems

• Good team player with excellent interpersonal and communication skills.

• Meticulous, Quality conscious and Problem solving/troubleshooting skills.

JOB DESCRIPTION:

To carry out field service attendances to troubleshoot & repair cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

REQUIREMENTS:

To carry out field service attendances to troubleshoot & repair cranes, Grabs, Windlasses, Hatch Cover Hydraulics and Davits.

The successful candidate will have solid working experience with Crane and repair machinery makers such as:

MacGREGOR

IHI

MITSUBISHI

LIEBHERR

TTS

TSUJI

HATLAPA

PUSNES, NIPPON PUSNES etc.

THE SUCCESSFUL CANDIDATE WILL HAVE ALSO:

1. Experience in Inspection and Troubleshooting:

minimum of 3 years of experience in inspecting, troubleshooting, and repairing hydraulic systems, which is relevant to process industries that often utilize similar hydraulic machinery for operations.

2. Knowledge of PLC and Electro-Hydraulic Systems:

In-depth knowledge of PLC-controlled electro-hydraulic systems, as process industries frequently employ automation and control systems to enhance operational efficiency.

3. Reading Technical Diagrams:

The ability to read and comprehend electric and hydraulic diagrams, where understanding complex systems is essential for maintenance and troubleshooting.

4. Independent Problem Solving:

Stress the capability to independently troubleshoot electrical, hydraulic, and mechanical problems, which is vital in process industries where downtime can lead to significant losses.

5. Supervisory Skills:

The experience in supervising a team of mechanics and leading large repair projects can be translated to managing teams in process industries, ensuring that projects are completed efficiently and safely.

6. Technical Reporting and Communication:

The ability to write technical reports and communicate effectively with stakeholders is important in process industries for maintaining compliance and ensuring that all parties are informed about project statuses.

7. Additional Skills:

Mentioning experience with variable frequency drives (VFD) is particularly relevant, as VFDs are commonly used in process industries for controlling motor speeds and improving energy efficiency.

As a Sales Engineer / Senior Sales Engineer, you will join our dynamic sales force in developing new businesses and providing professional solutions to our potential clients. Identify new sales opportunities through prospecting.

Job Description:

• Originate and close opportunities to develop new market segments, product groups and channels.
• Identify and canvass new sales opportunities and market through prospecting.
• Develop and plan sales strategies to meet monthly sales targets and progressive KPIs.
• Respond efficiently to customers’ technical or commercial queries and consistently meets customers’ expectation.
• Work closely with Sales Manager and Director to develop and implement sales and service strategies to achieve committed sales target.
• Work closely within Sales Department to manage and expand existing business and contribute to meet sales KPI.
• Travelling to be expected.

Requirements:

• Diploma or Degree in Engineering, preferably in Marine, Mechanical or Mechatronics field.
• Have a strong and successful sales experience for more than 2 years in marine or oil and gas industry.
• Positive working attitude and self-motivated.
• Preferred who are familiar with valves and pumps or piping solution.

Build a career with confidence.

Carrier Global Corporation, global leader in intelligent climate and energy solutions is committed to creating solutions that matter for people and our planet for generations to come. From the beginning, we've led in inventing new technologies and entirely new industries. Today, we continue to lead because we have a world-class, diverse workforce that puts the customer at the center of everything we do.

About the role

This position is for a Refrigeration Airconditioning Lab Engineer, performing Engineering lab day to day operation. To work on continuous improvement on Engineering lab procedures and maintain a high level lab safety standard.

Key Responsibilities:

As a Refrigeration Airconditioning Lab Engineer, you’ll be responsible for:

• Prepare and conduct product audit tests on time, consolidate test data and generate test report.
• Ensure test assignments were conducted safely and efficiently, including system prototyping, measuring instrumentation and conducting testing.
• Plan and arrange for regular maintenance for lab facilities and tools. Follow up with repairing, addition and improvement works.
• Coordinate with factory facility and outside contractors for sub-contract jobs, make sure the work carried out by contractors meet specific requirement, and ensure contractors are following strictly with Carrier’s safety requirements.
• Maintain regular records and improve procedures for team CX and safety, including safe work procedures, TPMs, risk assessments.
• Comply with company and regulatory ethics and EH&S requirements.
• Comply with company expense approval requirements.
• Actively participate in CX activities.
• Support for company recreation committee activities.

Requirements

We are looking for people who have passion in Engineering. If this is you, get in touch.

As a minimum you must have:

• Recognized degree in Mechanical or Electrical Engineering
• Diploma holders with good track record will also be considered.
• Preferably 3 years of experience in air conditioning or refrigeration industry, candidates without prior relevant experience are welcomed to apply.

Benefits

We are committed to offering competitive benefits programs for all of our employees and enhancing our programs when necessary.

Our commitment to you

Our greatest assets are the expertise, creativity and passion of our employees. We strive to provide a great place to work that attracts, develops and retains the best talent, promotes employee engagement, fosters teamwork and ultimately drives innovation for the benefit of our customers. We strive to create an environment where you feel that you belong, with diversity and inclusion as the engine to growth and innovation. We develop and deploy best-in-class programs and practices, providing enriching career opportunities, listening to employee feedback and always challenging ourselves to do better. This is The Carrier Way.

Join us and make a difference.

Apply Now!

· Degree in Mechanical Engineering

· Minimum 5 years relative Design Experience in Marine Industry

· Able to independently do calculations, develop ship piping system Engine Room Layouts, HVAC, Shafting, etc

· Able to develop Specifications related to Machinery

· Knowledge of different classification Rules Regulations SOLAS,MARPOL,IMO,MEPC etc

· Able to liase with Class, Owner’s Yard & Clients

· Should have adequate knowledge of pipe routings,

· Knowledge of Piping Standards