Responsibilities:

Project Preparation, Evaluation and Execution

• Initiate and monitor the master project schedule up to FID
• Develop high-level project descriptions including layout drawings and process drawings(P&ID)
• Prepare specifications in line with Vopak standards and estimate costs for the proposed new, modifications or expansions project
• Take lead in preparation and completion of the ITB document including Basis of Design (BoD).
• Develop bid & piping packages for smaller project portions and work with Vopak Managers to develop bid packages for larger turnkey construction project portions.
• Take lead in technical clarification with the guidance of Vopak Managers to fully assess completeness of tender proposal and detailed comparison with every tenderer
• Provide the necessary inputs on technical evaluation to identify the most appropriate proposal for awarding of tender
• Review consultant and contractor drawings, specifications and documentation in liaison with Vopak Team.
• Assist commissioning team during the commissioning stage
• Liaise with the procurement team for purchasing of equipment / material according to the approved vendor lists and prepare Request For proposal (RFP) for obtaining quotes from bidders, Tendering & BQ evaluation
• Be responsible for project record-keeping. Perform overall quality control of the work (budget, schedule, plans, and personnel’s performance) and report regularly on project status
• Provide an on-site technical and engineering service between contractor and Vopak to maintain control of construction, including site safety supervision and Safe Work Permit coordination
• Supervise and review Contractor Quality Inspection and Test Programmes. Coordinate specialist Third Party Inspections
• Review technical problems arising during construction, ensuring significant matters are formally resolved between contractor and Vopak.
• Investigate variation orders and make recommendations
• Monitor site OHS and environmental performance.
• Report to Project Manager and liaises with other discipline lead engineers to ensure proper coordination and interface among different disciplines
• Ensure that pertaining engineering activities (process, civil, marine, mechanical, piping, electrical, instrumentation and control, painting and insulation) are carried out in accordance with project requirements

Project Governance

• Support, deputise the Project Manager, and be accountable for the success of the project
• Support the Project Manager to evaluate the risk level; to seek mandate from the executive board prior to signing off; to provide leadership for the VPM roles and internal customer to manage project stakeholders; to coordinate all applicable project work streams

Compliance

• Take lead in overall compliance to Vopak Project Management (VPM) requirements.
• Conduct What-If risk assessment on changes under MOC
• Conduct Peer / Design Review as part of VPM requirement
• Keep abreast with the requirements of local legislative requirements and Vopak Corporate, Codes, Standards, and regulations
• Review of Method Statement and JSA(New)

Post Implementation Review

• Conduct project review on project and technical accomplishments
• Close-out the project and participate in a post implementation review

Stakeholder Relationship & Management

• Plan and deliver stakeholder engagement activities to develop effective project working relationships and to ensure that stakeholder needs and concerns are identified and met
• Manage internal and external stakeholder to ensure project is completed timely and safely
• Liaise with tax, legal, insurance, and treasury corporate departments / advisors on matters like e.g., contracting plan, and project execution plan

People Management

• Coach and guide other Project Team Members

Requirements:

• At least 5 to 8 years Oil & Petrochemical experience. 5 years project management experience, in similar industry
• Certified - Project Management
• Certified - Construction safety course for Project Managers
• Degree in Engineering preferably Mechanical or Process.
• Preferable to have piping experience.
• Experience in Construction and Maintenance of Jetty and Jetty topside equipments)
• Conversant with International standards such as API, ASME, ANSI, OCIMF, NFPA, Singapore Standard, Code of Practice.
• Preferable to have worked in Oil/Chemical Terminal experience
• Project or work exposure in tank engineering, construction or maintenance.
• Project or work exposure in process design or rotating equipment / terminal equipment maintenance,
• Sound Project Management skills and track record
• Project proficiency with Engineering and Operational knowledge background and experience in managing tank farms and similar projects.
• Knowledge of technical functional areas for better coordination and timely decision making
• Ability to work well in cross cultural environment
• Trustworthy, Integrity and independence
• Planning and organization skills
• Financial management skills
• Good communication (verbal and written) and interpersonal skills
• Effective problem solving skills

JOB DESCRIPTION:

• Preparation of material requisition based on project specification/standard and regulation for rotating equipment(such as centrifugal pumps, positive displacement pumps, air and utility compressor, steam/gas turbines, etc.,)
• Technical evaluation of acceptability in line with our material requisition for Vendor’s quotations.
• Review Vendor drawings and documents for their completeness, accuracy and compliance.
• Preparation of BOM (Bill of Material) for construction engineering.
• Review other discipline’s drawing and document for interconnection design with piping, civil, electrical and instrument design, but also process design.
• Provides technical/engineering support and preparation for quality work at supplier shop and Construction/Commissioning work at site.
• Resolves technical issues using acquired knowledge that may arise during the execution of package engineering, fabrication and post-delivery.
• Organize the interface meeting among vendors and other discipline etc. for technical clarification.
• Assist Lead/Senior engineer to execute project.

JOB REQUIREMENT:

• Bachelor Degree in Engineering.
• Minimum 5 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in off-shore application.
• Possess relevant experience working on EPC projects.
• Familiar with International Industry Codes such as ASME, API etc.

We are looking for a skilled System Engineer with a focus on hardware to design, implement, and maintain our systems infrastructure. As a System Engineer, you will play a key role in sourcing correct System on Module, System on Chip, or Single Board Computers to achieve desired design specfications. You will collaborate with cross-functional teams to analyze requirements, recommend hardware solutions, and contribute to the overall success of our projects.

Responsibilities:

1. Hardware Design and Implementation:Design, develop, and implement hardware solutions to meet system requirements.Conduct hardware evaluations and recommend appropriate technologies to enhance system performance.
   
2. System Integration:Integrate hardware components into the overall system architecture.
   Collaborate with software engineers to ensure seamless integration between hardware and software components.
   
3. Troubleshooting and Maintenance:Diagnose and resolve hardware-related issues promptly to minimize system downtime.Perform routine maintenance tasks to ensure the ongoing reliability of hardware systems.
   
4. Performance Optimization:Monitor system performance and recommend optimizations to enhance efficiency. Conduct performance testing and analysis to identify areas for improvement.
   
5. Documentation:Create and maintain comprehensive documentation for hardware configurations, processes, and procedures.Develop and update system engineering documentation as needed.
   
6. Collaboration:Work closely with cross-functional teams, including software engineers, network engineers, and project managers, to achieve project goals. Provide technical expertise and support to team members as required.
   

Qualifications:

• Bachelor's degree in Computer Science, Electrical Engineering, or a related field.
• Proven experience as a System Engineer with a focus on hardware.
• Strong knowledge of hardware components, architectures, and technologies.
• Proficiency in hardware design and integration.
• Experience with troubleshooting hardware issues and implementing solutions.
• Familiarity with performance monitoring and optimization tools.
• Excellent collaboration and communication skills.
• Detail-oriented with a strong problem-solving mindset.

If you are passionate about system engineering, possess excellent hardware skills, and are ready to contribute to innovative projects, we invite you to join our team. Apply now and be a part of our exciting journey towards success!

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

JOB RESPONSIBILITIES

• Operate, maintain, troubleshoot and repair electrical equipment in a data center environment. Provide Root Cause Analysis (RCA), recovery and prevention actions for service failure.
• Prepare and execute operation procedures, respond to work request/service failure and provide operational and technical expertise in required areas.
• Coordinate vendor support in repairs/replacement and support project implementation (e.g., site acceptance tests, factory acceptance tests, site inspection for defects, etc.).
• Develop an understanding of the infrastructure design and sequence of operation.
• Prepare and conduct training to the team. Ensure safety rules and regulations associated with operating infrastructure.

MINIMUM QUALIFICATIONS

• Associate's degree, trade school certification, in a relevant technical field, or equivalent practical experience.
• 2 years of experience with electrical, mechanical, and controls systems, including: Feeders, Transformers, Generators, Switchgears, Chillers, UPS systems, ATS/STS/PDU/PMM/Air handling and CRAC units.
• Experience with SCADA, power monitoring system, building monitoring system, PLC programming.

PREFERRED QUALIFICATIONS

• Experience in troubleshooting.
• Knowledge of industrial networking, with the ability to coordinate with others in order to determine problems and implement solutions.
• Ability to follow the site’s environmental health and safety policies.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions.
• Ability to work non-standard hours and differing rotations/shifts.
• Ability to work in varying outdoor temperature conditions, perform material handling (e.g., lifting/shifting), and work on platforms, ladders, and under raised floors.

Core Duties and Responsibilities

• Maintaining and administering computer networks and related computing environments including systems software, applications software, hardware, and configurations.
• Perform hands-on installation and maintenance tasks on network components such as routers, switches, and cables.
• Monitor network activity and configure network systems using complex computer software.
• Performing disaster recovery operations and data backups when required.
• Protecting data, software, and hardware by coordinating, planning, and implementing network security measures.
• Troubleshooting, diagnosing, and resolving hardware, software, and other network and system problems.
• Replacing faulty network hardware components when required.
• Maintaining, configuring, and monitoring virus protection software and email applications.
• Monitoring network performance to determine if adjustments need to be made.
• Conferring with network users about solving existing system problems.
• Operating master consoles to monitor the performance of networks and computer systems.
• Coordinating computer network access and use.
• Designing, configuring, and testing networking software, computer hardware, and operating system software.

Knowledge, Skills and Attributes

• Strong understanding of network infrastructure and network hardware
• Ability to think through problems and visualize solutions
• Ability to implement, administer, and troubleshoot network infrastructure devices, including wireless access points, firewalls, routers, switches, controllers
• Knowledge of application and network infrastructure protocols
• Ability to create accurate network diagrams and documentation for design and planning network communication systems
• Good analytical and problem-solving skills

Additional Requirements

• Diploma in information technology or related field of study with a network engineering focus.
• Relevant certifications, CCNA (Must), ITIL
• Knowledge on MS Windows administration, FortiGate FW, Radius, Tacacs

Responsibilities:

• Site viewing , co-ordination and oversee ongoing job progress for AV products
• Termination, testing, commissioning and project handover
• Perform preventive maintenance

Requirements:

• "O" Level/ITE/Diploma/Entry level preferable with electrical experience
• Computer/electrical/electronic knowledge will be added advantage
• Preferably possess Class 3 license
• Able to plan & work with sub-contractor to complete the project within a given time frame
• Possess good interpersonal and organization skills
• Good soldering skill on audio & video connectivity
• A good team player customer orientated

On behalf of our client who is in the building equipment space, we are looking for Service Engineer with the following details :

Description

• To lead a team of technicians to maintain a portfolio of equipment in servicing, repair, modifications, and callback.
• Customers' point of contact in terms of feedback or request pertaining to equipment, resolving issues, reports, etc to achieve customer satisfaction.
• Monitor equipment performance and handle problematic lifts & escalators to achieve targets as well as continual improvement
• Plan, Implement, Monitor & Control the progress of chargeable, non-chargeable works, monthly servicing schedules, and callback roster
• Provide leadership, technical guidance, and support to subordinates.
• Obtain required materials/resources for works as required
• Prepare and conduct training for maintenance field staff with monitoring to ensure MIP/Best Practices are properly implemented
• Complete office administrative works as required.
• To communicate with inter-department staff for solutions & resolve issues
• Report and assist Section Head on operations.

Requirement

• Diploma in Mechanic/Electrical/Mechatronic Engineering
• With at least 2-3 years of experience in a supervisory /team lead role
• To be 24/7 operationally ready to attend to issues (rostered)

EA registration : 22C0971 | EA License : R21101298

JOB DESCRIPTION:

• Prepare Engineering product according to other department’s product / ITB / Licensor’s Specification.
• Produce Instrument datasheet according to ITB/ Client ‘s Specification/applicable Code & Standard, technical consideration
• Evaluate the Vendor’s quotation if it is technically complying with the given requirement or having deviation,
• Review the nozzle dimension of vessel/equipment that installing instrument is require adjustment.
• Review Vendor prints following the design that proposed in quotation stage, submission is accordance with schedule.
• Estimate cost in proposal stage by getting cost data from similar previous project or asking to vendor.
• Co-work and collaborate with other engineering disciplines to resolve any issue arising during project execution.
• Have training experience of Instrument engineering tool software
• Review 3D modeling and check any interference between instruments and other construction

JOB REQUIREMENT

• The degree of Master of Bachelor
• At least 5 - 10 years project experiences as I&C Engineer.
• Have experience of designing & procurement of field instrument
• Have experience of estimating construction bulk material
• Have experience of preparing C&I related document
• Able to communicate in English and Japanese with internal stakeholders.
• Have knowledge of using engineering software such as, Intergraph Smart plant, AVEVA
• Have knowledge of proper usage of material for construction or field instruments
• Have knowledge of Control system such as DCS, MMS, ESD
• Working experience in oversea company/site
• Have understanding of Specification/Code & Standard
• Proficient in written and spoken English and Jap to interact with internal stakeholders.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Overview

We are looking for people with a strong background in Computation & data infrastructure and/or building data systems. They must be comfortable working with a range of stakeholders and functional teams including Students, Faculty, IT and External Collaborators. The right candidate will have a passion for working with numerous small research teams to assist in managing their Infrastructure needs and advise them on best practices to engineer their projects efficiently.

Responsibilities

INFRASTUCTURE MANAGEMENT (50%):
• Maintain servers, including file , web , proxy servers, including security patches.
• Allocation of compute / storage resources as needed.
• Analyse institute infrastructure needs to implement for services providing improvements to systems.
• Management of the Institute Website.
• Liaise with Global IT teams to ensure compliance to their policies and be a single point of contact for the institute for troubleshooting.
• Manage recording and streaming systems during regular seminars / Conferences and workshops.

DATA ENGINEERING (25%):
• Support research teams with advice on efficient Data Engineering practices including automation of data pipelines, data cleansing, integrity checks etc.
• Develop processes to handle remote data access / management in compliance with security best practices (and appropriate policies)
• Assess the effectiveness and accuracy of new data sources and data gathering techniques.

SYSTEM DEVELOPMENT (25%):
• Create APIs for integrate data source into functional blocks of software & services.
• Create APIs for downstream usage of Data models.
• Coordinate with different functional teams to implement models and monitor outcome
• Promote security best practices for application development

Requirements

• Bachelor degree in Computer Science, Operations Research, Engineering with more than 3 years relevant experience
• Experience in maintaining virtualised server infrastructure and creative problem solving within large IT infrastructure.
• Deep understanding of statistical analysis, data mining or machine learning
• Practical experience in working with large structured and unstructured data set
• Ability to think analytically and deliver results that drive business decision making
• Team player to build strong partnerships
• Have competency in one or more of the programming languages or tools: Python, R, Spark
• Experience in security engineering will be a plus
• Experience or knowledge in AWS/GCP environment will be a plus
• Prepared to take on new challenges and ad-hoc requests that need a quick turn-around
• Excellent written and verbal communication skills for coordinating across teams.

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring that corrective actions are in place and implemented for all non-conformances detected during audits
• Responsible for liaising with production side on the investigation of root cause of non-conformance and procedural failures
• Responsible for reviewing and approving required specifications and revisions in documentation prior releasing for production or customer
• Responsible for conducting process audit and internal quality scheduled/unscheduled audit
• Responsible for ensuring work is carried out in accordance with documented procedures

Requirements

• Min Diploma in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in CNC/ Precision/ Machining Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities & Duties

• Responsible for providing engineering expertise and technical assistance for the installation, maintenance, troubleshooting, repair and modification of facilities and equipment, development and implementation of maintenance procedures and techniques for safe, reliable and efficient operation of the plant.
• Responsible for participating in production machineries installation, modification and maintenance
• Responsible in ensuring that all process equipment, utility installations and electrical installations are maintained and running at optimum efficiency.
• Responsible for defining and generating evaluation plan, and execute qualification plan for alternate component replacement or cost reduction.
• Responsible for working with supplier and procurement team to drive cost reduction and quality issue.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 5 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for ensuring products produced meet the product and customers' quality requirement
• Responsible for developing and improving the processes to gain productivity, efficiency, quality and costs.
• Responsible for coordinating NPI/NPQ activities with details and meeting timeline.
• Responsible for supporting and resolving daily technical issues in operations
• Responsible for supporting analysis of failures from yield loss, reliability failures, new products, new materials.

Requirements

• Min Diploma in Electronic Engineering, Material Science or relevant
• Min 5 years of working experience in semicon assembly and test environment
• Experience in Assembly FOL of dicing, die attach, wire bond
• Experience in maintenance of assembly and test machines of dicing, die attach, wire bond encapsulation, testing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supporting new product development, new product introduction and cost out designing for existing product lines through sound execution of engineering principles and processes
• Responsible in interfaces with design engineering in coordinating the release of new products.
• Responsible for estimating manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines.

Requirements

• Min Degree in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics / Chemical Process Technology
• Min 5 years of working experience in Manufacturing Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities:

• Responsible for managing and planning manufacturing process sequence, from receipt of raw materials till finished parts shipment.
• Responsible for developing new processes solid modeling and create/update work instructions, in accordance with engineering drawings and specifications.
• Responsible for leading and supporting continuous improvement projects
• Responsible for providing technical support to Production to achieve technical and quality requirements.
• Responsible for supporting Request for Quote (RFQ) proposal development and process

Requirement

• Min Diploma or Degree in Mechanical/Manufacturing/Aeronautical Engineering
• Min 3 years’ experience in Precision Engineering/ Aerospace/ Oil &Gas Manufacturing

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for evaluating and qualify products to fulfil customer expectations regarding reliability, usability, and operating life

Requirements

• Min Diploma in Engineering
• Min 2 years of working experience in failure analysis of metals and materials related products
• Experience with test or life cycle management tools an advantage

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

The position, located in Singapore, is an exciting opportunity to be part of an Innovative & Dynamic team, within the Imaging Validation Team, part of the Imaging Division, working on different worldwide leading technology image sensors targeting various customers and markets (Consumer, Industrial, Automotive).

As a Functional Validation Engineer, you would be involved in the validation of the various products of the division. The objective of the job is to ensure the functional performances of the product is aligned with the specification. Two kinds of platforms will be used: FPGA prototyping platform in a first step, silicon platform with final product in a second step. You will be supported by a large team of technical experts in validation, Optic, Electronic, Mechanics, software.

As a Functional Validation Engineer, you:

• Will be responsible of validation environment development: Test suites definition, Laboratory test bench, test development, validation automation, documentation.
• Will be in charge of the analysis and the solution of technical challenges.
• Will support customer for the integration of the product in customer platform
• Will collaborate with different Product Development Teams: IC Design, IC Architecture & Algo, Embedded Software/Firmware
• Will collaborate with application team in order to provide best solution for the customer

Profile:

- Bachelors’ degree in Electrical Engineering or similar discipline.

- At least, 6 years of experience, in Validation, Testing or Electronic product development.

- Mandatory skills:

• Analog or Digital Electronic Knowledge
• Programming skills in Object Oriented Software Language (Python preferred)
• Data Base management tools (git, SVN)
• Strong verbal and written communication skills in English

- Softskills required:

• Engage and collaborate with cross-functional teams
• Good level of autonomy, methodology and rigor
• Ability to work in a multi-cultural environment.

- Minimum of 3 years’ experience in one of the following area:

• Electronic Component verification, validation, or industrial test
• Electronic System Development
• Microcontroller Firmware development

- Additional optional skills:

• Electronic System experience
• Thorough familiarity with lab measurement techniques and test equipment (Signal Generator, Oscilloscope, …)
• Standard electronic communication protocols knowledge: I2C, I 3C, MIPI CSI2
• Automatization tools experience (Jenkins, gerrit)
• Knowledge in CMOS image sensors and in image data processing

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven