Job Description

• Prepare and execute testing activities

1. in support to one or several Projects on railway signalling systems under the direction of his / her hierarchy
2. according to the testing procedure / documentation and following Sub-system T&C Leader and / or PrCOM instructions

• Ensure defects identification and correction (trouble shooting)
• In the event of a non-conformity observed during the commissioning phase, make a return experience (REX) towards the project, and ensure that all design related issues are correctly reported in the adequate tools, including the defect description and associated test context
• Ensure follow-up of detected issues and deliver the commissioning reports.
• Check that the test tools are in perfect working order and calibrated.
• Support V&V team and perform test in lab as per request
• Deliver the committed performance in terms of Quality, Costs and Deadlines and in compliance with client policies, local standards and regulations (in particular EHS and Railway Safety)

Requirements

• This role would suit an energetic and experienced quality engineer who has worked with main and subcontractors for over 10 years
• Master's degree in engineering (preferably electronics or embedded systems) or equivalent experience.
• Railway and signaling knowledge, Previous Engineering, V&V, T&C or Maintenance for Railway Signaling is an asset.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.

Job Responsibilities:

1. Circuit and system design of RF/analog transceiver IC based on CMOS technology

2. Schematic design, behavioral and circuit-level simulation, circuit implementation, layout design and test

Job Requirements:

1. A master's degree or above in microelectronics, communications, electronic engineering and other related majors; more than 3 years of relevant experience

2. Good know-how on RF/analog circuit theory and analysis; Good understanding of design process of RF/analog IC

3. Solid experience in the following module/block design and test: VCO, PLL, LNA, PA, MIXER, PMU, ADC, DAC, etc.

4. Good communication skills and team spirit.

5. Fresh MS graduates are welcome.

Responsibilities:

• Provide 2nd level onsite troubleshooting support in response to escalation from helpdesk to ensure consistently meet customer response / resolution times and objectives based on SLA
• Coordinate with equipment vendors and 3rd part suppliers to resolve issues
• Attend to customer enquiries (through phone and email) and follow-up on outstanding issues closely while ensuring that customers are kept updated on the progress
• Maintain call log database system and ensure all unresolved problems are escalated to the senior engineers
• Participate in adhoc projects when required

Requirements:

• Possess NITEC certification or Diploma in IT or relevant discipline
• Experience in desktop support and good working knowledge in Windows OS, Basic Network experience
• Minimum 2 to 3 years experience in customer support environment will be an added advantage
• Able to work under pressure and independently in a team environment
• Must be able to work in a fast-paced and dynamic environment
• Willing to travel around Singapore to multiple sites
• Able to work on rotating shifts

Job Description:

• 5+ years of experience in software testing.
• Strong experience in web services testing using SoapUI or Postman.
• Experience in web application testing is required.
• Familiarity with automation testing using Selenium, Cucumber, or QTP is a plus.
• Hands-on experience in testing activities, with a willingness to write and execute test cases on a daily basis.
• Proficiency in at least one test management tool and one defect management tool is required.
• Experience in sanity testing, regression testing, and system integration testing (SIT).
• Knowledge of the Software Testing Life Cycle (STLC) and testing processes is essential.
• Good attitude and strong communication skills are required.
• Willingness to learn and adapt during the ramp-up period; must be able to become hands-on quickly.
• Exposure to Selenium automation development is preferred.

Education:

Bachelor’s in computer science, Computer Engineering or equivalent/higher

Language:

Fluent written and spoken English

• Position: HSE Officer/Engineer/Lead
• Location: Gul Road (company transport provided)
• Working hours: 5.5 days work week
• Salary (commensurate with experience): Up to $6,000 + Performance Bonus (Up to 6 months) + Flexi Benefits + OT pay (if required)
• Duration: Permanent
• Industry: Marine & Construction Engineering (Listed & MNC Company)

Main Responsibilities:

• Ensure provision of the Act and Regulations are complied with
• Promote safe conduct of work in the yard
• Liaise with WSHO or Safety Coordinator on the matter with regards to safety, health and welfare of people working in the yard
• Conduct Safety Induction Programme
• Ensure that appropriate personal protective equipment is used by the employees, contractors' workers and visitors
• Conduct inspection tours at worksite
• Report any unsafe conditions, equipment and housekeeping
• Apply permit to work system as required by the procedures and regulations
• Liaise with subcontractors’ safety supervisors with respect to safety of work undertaken by subcontractors
• Ensure that all records of safety equipment are in order and properly maintained
• Assist WSHO in the event of any incidents
• Any other ad-hoc duties assigned

Requirements:

• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only
• Minimum Diploma in Workplace Safety & Health/Engineering or related discipline
• Minimum 3-5 years of experience in marine shipyard operations
• Ensure compliance with all legal and regulatory requirements

Email to: [email protected] for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Abby Pang

Deputy Consulting Director (APAC)

Reg no.: R2093867

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment.
• Designing and analyzing inspection and testing processes, mechanisms and equipment.
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks.
• Undertaking root cause analysis of incidents requiring corrective action.
• Ensure that corrective measures and deviation meet acceptable reliability standards and that documentation is compliant with requirements.

Job Duties & Responsibilities

• Research and analyze the project requirement, design the test case and develop test solution

• Take ownership of leading the quality of an assigned project and its features.

• Coordinate the execution of automated tests with a project’s testing cadence.

• Functional/ Regression testing verification.

• API and backend testing.

• Data analytics testing.

• UI and UX analysis and testing.

• Communicate with stakeholders and teammates of testing status and results.

• Contribute to collaboration with test automation team to continuously expand test coverage.

• Contribute to test case prioritization for manual and automated testing prioritization.

• Contribute to optimizing test case prioritization to increase testing velocity.

• Contribute to organisation’s Global QA improvement and project team’s quality process.

• Should have worked on Automation Tests for desktop based application

Job Requirements:

• Minimum Bachelor or Master Degree in IT/Computer Science or similar study background with 5 or more years of experience as a Software Developer Engineer in Testing (SDET)

• Good Knowledge of programming languages like Java, JavaScript and HTML

• Good to have knowledge on Banking or Finance.

• Expertise in automation testing tools like Selenium, Rest Assured , Cypress and Cucumber

• Expertise in BDD, Data Driven, Hybrid Test Automation Framework

• Hands on knowledge of desktop based app and its automation

• Able to adapt to changing business and project priorities.

• Proactive in bringing solutions to observed gaps in requirements and process.

• Proactive in test planning; able to identify and breakout tasks based on a test plan.

• Able to prioritize and execute QA tasks with minimal supervision.

• Execute tasks from QA lead or above.

• Mentor and guide junior level Associate QA Engineers and QA Engineers.

• Perform root cause analysis.

• Install and/or configure tests for systems.

• Optimize test cases for higher efficiency, especially for specific changes in code or features.

• Test client-server interaction.

• Test user behavior analytics.

• Analyze and test UI and UX requirements.

• JIRA and Confluence

Nice To Have Experience:

• Automation test result analysis and investigation of failures.

• Perform change impact analysis.

• Perform risk-based test analysis.

• Bonus skills and tools knowledge:

· GitHub and Bitbucket

· Docker

· Postman

· Jenkins CI

· JavaScript, Node.js & Selenium WebDriverIO

· Kubernetes

· Xray test case management tools

· AWS Cloud.

Interested applicants please send your resume in MS Word format and attention it to Joanna Tan (R1104661).

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

Business Registration Number: 200611680D. Licence Number: 10C5117

Responsibilities:

• Conduct daily preventive & corrective maintenance at remote work site
• Attend emergency site issues and response to site within service level of agreement
• Keep track and prepare service report for preventive & corrective maintenance
• Submit service report on daily basis
• To perform rotating standby duty
• To prepare spare part list and perform stock take of maintenance spares with client
• To liaise with other co-workers / departments and Customer
• Preparation of project submissions, ensure up-to-date documents and final submission of project documentation
• To responsibilities include project planning, co-ordinate, implement and manage security & communications related systems projects

Requirement:

• Diploma/Degree in Electrical & Electronics or IT discipline.
• At least 1 years hands-on experience in maintenance work in CCTV, Card Access Control, Intrusion Detection, ELV System,
• Good knowledge of Electrical / electronic control system
• Good knowledge on communication protocol will be advantage
• Strong execution and troubleshooting skills at remote site work
• Able to work independently with minimum supervision and under pressure
• Willing to work in outdoor environment
• Willing to be on standby on call duty

WHO YOU’LL WORK WITH

At NIKE, our purpose guides our culture and strategy. In Responsible Supply Chain we bring our purpose to life through strategy & targets, focused on product, planet and people. Our targets are ambitious, but achievable through clear goals, measures and accountability. We are transforming our supply chain with world-class and innovative programs that ensure our products are made responsibly and sustainably. Our progress depends on teamwork and end-to-end execution.

As Director, Responsible Supply Chain (RSC) in Singapore you will be part of the Global Responsible Supply Chain Leadership Team, reporting into the Senior Director, RSC, based in Nike’s World Headquarters in Beaverton Oregon. You will lead a team of sustainability subject matter experts, based in Singapore, driving performance against sustainability strategy and targets. Working closely with cross functional teams within global sustainability and supply chain.

WHO WE ARE LOOKING FOR

We’re looking for a Responsible Supply Chain Director in our Singapore office, to join the global Responsible Supply Chain leadership team. We operate one of the largest supply chains in the world and work with partners that make and move Nike products across the globe. Their leadership in sustainability is essential to ensure we meet our targets. To be successful in this role, we need someone with deep expertise in operationalizing strategies in global supply chains, preferably with experience in manufacturing, transportation and distribution.

The successful candidate will be able to think strategically, but also translate strategies into action with clear and aligned plans. They will be able to communicate our vision and motivate others into action, and able to drive organizational change. They will also be a trusted leader who fosters teamwork and develops others.

What they will bring:

• Bachelor’s degree or Master’s degree in sustainability or business related field preferred.
• 10+ years professional experience in Sustainability and Business leadership.
• Strong stakeholder and partner management skills.
• Excellent written and verbal communication skills.
• Ability to understand and use data to make the business case for RSC initiatives.
• Ability to network, influence and utilize internal and external resources.
• Project Management skills and a strong attention to detail.
• Ability to travel 10-20% of time.

WHAT YOU’LL WORK ON

The successful candidate will consult on Nike’s Enterprise Sustainability Strategy, Standards and targets, leading the implementation and execution of Nike’s Responsible Supply Chain (RSC) Strategy with Supply Chain Partners. Key responsibilities include:

• Delivering Nike’s Foundational Excellence program with Supply Chain Partners, driving performance against Code and Standards.
• Building Partner capabilities through Summits, Workshops and supporting Learning Communities.
• Driving continuous improvement and consistency in strategy creation, alignment, implementation and execution processes.
• Developing annual plans for Supply Chain Partner’s group level target implementation.
• Driving performance against Nike’s enterprise sustainability targets with Supply Chain Partners.
• Driving discipline in data management, analytics & reporting.
• Providing expert level tech expertise.

Overview:

Join Antina’s dynamic team as a Cybersecurity Project Engineer, where the successfully hired candidate will lead cutting-edge cybersecurity projects and ensure robust security operations. This role offers the perfect blend of technical expertise and project management, providing an exciting opportunity to make a significant impact in the cybersecurity landscape.

The 5G Exploratory Platform (5GEP) will serve as the dedicated testbed for 5G infrastructure. This platform will enable the discovery of vulnerabilities, the testing of network equipment, and to enhance the security and resilience of the 5G ecosystem.

Key Responsibilities:

1. Project Management:

• Lead cybersecurity projects from start to finish, ensuring timely and budget-friendly delivery.
• Develop project plans covering scope, schedule, resources, and risk management.
• Collaborate with vendors and internal teams for seamless project execution.
• Provide regular updates to stakeholders and document all project activities.
• Participate in requirement gathering, testing, training, and implementation phases.
• Meet project SLAs and manage potential risks.

2. Operations:

• Update network configurations, software versions, and procedures.
• Ensure security systems are tested and maintained.
• Assist in obtaining technical support from vendors and track system warranties.
• Implement and manage security measures like firewalls, IAM, SIEM, and SOAR systems.
• Respond to security incidents and provide detailed reports.
• Manage system and user functions, including access rights and maintenance.

Qualifications and Required Skills:

• Bachelor’s degree in Computer Science, IT, Cybersecurity, or related field.
• At least 2 years of project management experience.
• Proven experience in cybersecurity operations and project management.
• Strong knowledge of cybersecurity principles and technologies.
• Proficiency in IT, Networking, VMWare, and security tools.
• Excellent problem-solving and communication skills.
• Relevant certifications (CISSP, CISM, PMP, PCNSA/PCNSE) are a plus.
• Security clearance required.

An ideal candidate would possess the following abilities:

• Project Management: Lead and manage project timelines, coordinate with stakeholders, and implement security solutions.
• Network Infrastructure Management: Understand networking protocols, configure and troubleshoot firewalls, switches, routers, and load balancers.
• System Administration: Manage Windows and Linux operating systems, apply hardening techniques, and respond to breaches.
• SIEM: Customize dashboards, alerts, and reports; tune SIEM rules.
• Firewall Operations: Set up firewall rules and configurations, understand firewall logging and traffic monitoring.
• IAM: Knowledge of IAM principles and tools, implement multifactor authentication and single sign-on.
• Vulnerability Management: Use tools like Nessus or Qualys for vulnerability scanning, understand MITRE ATT&CK framework.

How to apply:

Visit our company website at www.antina.com.sg for more information or send your CV directly to [email protected].

Antina is a company driven by ability, performance, and hard work. We adopt fair employment practices and employment decisions will be based on merit, qualifications and abilities. Antina does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Position Summary:

This is for the Central Patch Management Service under the Systems Technologies which focuses on using BigFix for patch deployment, compliance, and reporting.

Roles And Responsibilities:

• Oversees the entire operation and understands how to use the tools & reports.
• In charge of the BigFix infrastructure, including servers, relays, SQL and updating of the software infrastructure.
• Control access to BigFix components.
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks related to patch management.
• Develops custom reports for stakeholders.
• Setting up content for distribution to endpoints.
• Creates baselines, writes custom fixlets and analysis.
• Develop and maintain groups inside of BigFix.

Requirements / Qualifications:

• Minimum Bachelor's Degree or Professional Degree in Computer Science / Information Technology or equivalent.
• Proficient in BigFix architecture or SCCM
• Minimum 5 years and above of relevant hands-on experience in system operation support and project management.
• Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.
• Experience in troubleshooting, resolving, and communicating complex incidents and deep underlying issues to identify root cause.
• Possesses strong analytical skills to diagnose and address application problems.
• Result and customer oriented with multi-tasking capabilities.

Equipment Engineer (Wet) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Copper Plating and Wet Etching process equipment working principle and how critical parameters will impact process and to work together with process counterpart to resolve complex integration issues
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance of Copper Plating and Wet Etching equipment
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Forecast financial budgets for equipment expenditures. Setup tracking system to monitor expenditures
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Self-audit and update specifications to meet company Quality Standard requirements
• Provide long term solution to address daily issues. Resolve department hardware chronicle issues.
• Possess knowledge on SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory
• Other ad-hoc duties as assigned

Requirements

• Minimum bachelor’s degree in electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• At least 3 years of relevant experience in equipment engineering, preferably in a semiconductor/LCD/Electronics / Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Candidates with no prior experience will be considered for junior position
• Proven ability to identify, assess and solve problems

Preferred Qualifications

• Prior experience in Advanced Packaging/LCD/foundry or similar industry background with SABRE/STRATUS/GPTC/SSEC experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

Main Responsibilities

1. Coordinate maintenance contractors, review checklists and ensure customer D.O. sign-off within the time.
2. Support Data analytics team with ongoing improvement on automation of data gathering, analysis and reporting, including fault detection and root cause identification
3. Prepare and maintain comprehensive energy conservation action plan to include previous and ongoing efforts and short, intermediate and long-term goals
4. Prepare operational and maintenance schedule as per MIS
5. Work closely and collaborate with the customer support team to ensure customer satisfaction.
6. Identify potential upselling opportunities at client site during regular or ad-hoc maintenance
7. Remote monitoring of the system operation and performance and reach site if any emergency.
8. Familiarization of Refrigeration System Chillers & Freezers, Compressors, Cooling towers, FCUs, Cold room, ETV doors and related controllers.
9. Working with a team and deliver the work within the planned schedule.
10. Collect the onsite operating parameters like cold room and space temperature and verify with SCADA.
11. Collaborate with Internal teams regarding any controls and programming related onsite works.

Qualifications

1. Diploma, Bachelor of Engineering Mechanical, Electrical or Equivalent
2. Electrical or Mechanical troubleshooting experience would be advantageous
3. HVAC knowledge of Chiller Plant, FCU, SCADA, Air side equipment
4. Strong communication and analytical skills.

This is a for a year contract subject to renew.

Responsibilities

· Assure sites are properly stocked with test tools. And test tools are periodically calibrated per AT standards.

· Participate in the Factory Acceptance Testing in the lab and preparation of FAT plan.

· Lead site commissioning activities of radio-based train control systems, including Functional tests and System Acceptance Test (SAT) and System Integration Test (SIT) and ensure that all interfaces to the signalling system are appropriately tested.

· Lead test and commissioning of the On-Board, Wayside, and Radio system system

· Liaise with Engineering / supplier for any design changes and modifications necessary subject to test results

· Record, report, and endorse test results when appropriate.

· Ensuring that testing activities are carried out in timely, logical and cost effective manners.

· Work with Engineering team for the evolution of drawings (ie. mark-up, change order, and transmittals) until the as-build stage.

· Develop productive relationships with client’s teams to ensure successful handover and post-implementation operation of projects.

· Plan and schedule site ITC activities in accordance to the rolling programme, that align with the master programme

· Produce red correction based on the released drawings and correct and rectify failures occurs during T&C phase.

· Raise NCR(None Confirmity) / MNCR (Material None Confirmty) / Fault report during fault found.

· Consolidate / track the following; records, software, hardwares, field changes.

· Implement field change orders

· Prepare installation and test and commissioning procedures / method statement for the communication-based train control system

· Verify the quality of installation works and raise concern if there is a quality issue.

· Troubleshooting, analysis in case of any issues encountered.

· Able to have a good collaboration with the vehicle testers and wayside testers during interface testing.

· Lead / Support the department for the payment milestones related to the test and commissioning

Requirements

·Bachelor’s degree in engineering or related field.

·Minimum 3 years of relevant experience.

Process Engineer (Wet) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in Wet process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer (Thin Film) is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor’s degree in Materials Science, Microelectronics, Chemical Engineering or relevant disciplines
• Minimum 3 years hands-on process experience in thin film process
• Experience working in Wafer-level Fanout packaging production line or LCD/FPD production line preferred
• Experience in process engineering, process control engineering and yield enhancement
• Experience in SPC, DOE, FEMA, and 8D reports

Process Engineer is responsible for development and establishment of production process.

Responsibilities

• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis. Lead and drive SPC control towards zero defects. Review and update FMEA, Control plan OCAP with cross-functional teams.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.

Requirement

• Minimum bachelor's degree in chemical engineering, materials science, microelectronics or similar disciplines.
• Knowledge in process engineering, process control engineering and yield enhancement preferred
• Knowledge in SPC, DOE, FEMA, and 8D reports
• Experience in semiconductor industry would be an added advantage
• Fresh graduates are welcome to apply

Process Engineer (Backend) is responsible for development and establishment of production process.

Responsibilities

• Responsible for Backend process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc.
• Establish, review and update specifications, workflow, quality and safety related documentation for production line.
• Troubleshoot process issue and improve process capabilities, yield and cycle time from customer NPI stage to LVM/HVM stage.
• Process sustaining and control through SPC and periodic defect Pareto Analysis.
• Lead and drive SPC control. Review and maintain FMEA, Control plan, OCAP with cross-functional teams.
• Handle and manage customer audits and 8D reports.
• Provide disposition for engineering and production lots.
• Conduct process characterization and qualification to establish process baseline.
• Coordinate and liaise with vendor/suppliers on process issue or quality issue.
• Support customer NPI activities and internal engineering activities.
• New material, process & machine development and qualification.
• Review and accept machine buyoff, setup pilot line process and transfer from pilot line to production line

Requirement

• Minimum bachelor's degree in material science, microelectronics, mechanical engineering or relevant engineering field
• Experience in semiconductor manufacturing industry and working in cleanroom environment
• Hands-on process experience in Backend Process: Pick and Place / SMT and SMD / Ball Drop / Reflow / Laser Marking / Tape and Reel / Singulation / Packing / AOI, etc within semiconductor IC packaging industry
• Experience in SPC, DPE, FMEA, OCAP, WI, CPK, PPK, 4D/8D report

Process Associate Engineer (Backend) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in Semiconductor and LCD processes are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machines related to production
• Monitor process via SPC chart/real time monitoring system
• Work on continuous improvement projects
• Perform lots on hold and disposition
• Support in recipe setup and qualification for production
• Troubleshoot process-related issue
• Collect engineering data
• Prepare manufacturing documents
• Maintain good housekeeping in the production area
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum Diploma in Electrical / Electronics / Mechatronics / Mechanical/ Microelectronics Engineering or similar disciplines
• Process experience in Backend Process: Pick and Place, SMT/SMD, Ball mounting, Reflow, Laser Marking and Package Sawing
• Experience in Packing (TnR, Tray, MBB, etc) is an added advantage
• Experience working in semiconductor manufacturing environment
• Experience in manufacturing documentation of SPC, WI, SOP, FMEA, etc.
• Able to work under various shift pattern. The selected candidate will start with normal office hours, and eventually transition to 12-hour rotating shift between day and night

COMPANY DESCRIPTION

As the world's leading owner and operator of LPG carriers with five decades of operating experience, BW LPG promotes competitive, sustainable solutions to secure value for society and our stakeholders.

Our global footprint spans seven countries with 17 nationalities represented across our workforce. Our fleet of 39 Very Large Gas Carriers (VLGC) offer a total carrying capacity of over 3 million CBM. From spot voyages and time charters to Contracts of Affreightments (CoAs), our emphasis on flexible, reliable service has earned the trust of leading oil companies as well as trading and utility companies. More information about BW LPG can be found at www.bwlpg.com.

BW LPG is associated with BW Group, a leading global maritime company involved in shipping, floating infrastructure, deepwater oil & gas production, and new sustainable technologies. Founded in 1955 by Sir YK Pao, BW controls a fleet of over 490 vessels transporting oil, gas and dry commodities, with its 200 LNG and LPG ships constituting the largest gas fleet in the world. In the renewables space, the group has investments in solar, wind, batteries, biofuels and water treatment. BW LPG, as a member of the BW Group, is one of Forbes World's Best Employers 2023.

RESPONSIBILITIES

Summary:

The Senior/ Data & Machine Learning Engineer is a hybrid role focusing on developing our modern Lakehouse including pipeline development, and the deployment of machine learning models.

This position combines the responsibilities of a Data Engineer and Machine Learning Engineer, ensuring robust data pipelines and scalable deployment of ML models.

The role involves building data ingestion and transformation processes, deploying machine learning models, and working with DevOps and CI/CD for automated deployments and monitoring.

Collaborating with Business Analysts to ensure business requirements are translated into data solutions.

Working with Data Analysts to deliver accurate and reliable datasets that power impactful analytics and dashboards.

Partnering with other Data Engineers and Analytics teams (e.g., Quantitative Research team) to support advanced analytics and provide datasets for reporting and insights.

They collaborate with System Analysts and the Business to understand the business logic and data lifecycle within our systems and translate this into technical analytical solutions.

Responsibilities

• Design and maintain data pipelines: Design, build, automate, and optimize ETL/ELT pipelines to support data flow, transformation, and availability across the Lakehouse platform.

• Collaborate on data storage and solutions: Partner with analysts to create scalable storage solutions, optimizing data structures for both analytics and ML applications.

• Implement data quality and governance standards: Establish monitoring and enforce data quality checks, ensuring data consistency, reliability, and compliance.

• Optimize and maintain model performance: Continuously monitor deployed models for performance, retraining or adjusting them as needed to ensure sustained accuracy.

• Deploy and monitor machine learning models: Design and implement CI/CD pipelines for model deployment, ensuring efficient and reliable delivery of ML models.

• Mentor junior team members: Guide and foster the professional development of junior data engineers, enabling their contribution to the team and ownership of project deliveries.

Expertise:

• Collaboration and Communication Skills: Excels at working in a team to align data solutions with business needs, focused on creative problem-solving in a fast-paced environment.

• Analytical Thinking & Communication: Strong skills in analyzing and translating data-driven insights and requirements to both technical and non-technical stakeholders.

• Data Pipeline Development Skills: Proficiency in designing and implementing data pipelines to support reliable data ingestion and transformation using Databricks and Spark.

• Data Modeling Expertise: Advanced SQL and Python skills for complex queries and data modeling, enabling efficient data access and transformation.

• Python & Model Deployment Proficiency: Expertise in Python for deploying models and developing APIs for serving predictions.

• Spark & Azure Databricks: Skilled in using Spark on Databricks for processing large-scale datasets and supporting machine learning workflows.

Knowledge of:

• CI/CD Pipeline Creation (incl. for ML Models): Experience in creating CI/CD pipelines, enabling automated testing, validation, and deployment of data pipelines and machine learning models using GitHub and GitHub Actions with Databricks.

• Monitoring & Model Maintenance: Ability to set up monitoring tools for models, track metrics (accuracy, latency), and maintain model performance.

• IaC for Infrastructure Automation: Experience in automating cloud infrastructure management for consistent deployment and scaling using Infrastructure as Code tools like Terraform.

• Power BI Integration: Basic understanding of Power BI for creating visualizations of model performance and metrics for stakeholders.

• Agile Methodologies in Data Engineering: Understanding of agile frameworks to work within iterative sprints and collaborate with cross-functional teams

Experience:

• At least 3 Years in Data Engineering: Proven experience building and maintaining data infrastructure, with a deep understanding of data engineering principles and best practices.

• 1 Year in Machine Learning Engineering: Track record in managing the lifecycle of machine learning models, including deployment, monitoring, and retraining.

• Business & Data Transformation: Experience working in supporting business transformation and process improvement into Data-Driven organizations and systems.

• Agile Mindset and Experience: Thrives in Agile Environments, with a strong resilience, adaptability and responsiveness to change in fast-paced settings.

The position will be based in Singapore.

Only shortlisted candidates will be notified.

Company Description

Higogame is a trailblazer in the mobile gaming and entertainment industry. Since our inception in late 2020, we have been dedicated to transforming the gaming landscape in Southeast Asia and beyond, delivering innovative and immersive experiences that engage millions of players around the globe.

• Our revenue has seen remarkable growth year after year, with operations extending across multiple regions worldwide.
• In just three years, we've risen to become one of the top two games of our kind in the local market.
• We proudly serve around 2 million active users daily and have a total monthly active user base of 5 million worldwide.
• Our team consists of over 200 talented employees, including a robust R&D division of more than 100 experts.
• We offer exceptional career development opportunities and foster a multinational culture that empowers everyone to reach their full potential.

Join us as we continue to push the boundaries of mobile gaming!

Job Responsibilities:

1. Responsible for the secure operation and maintenance and development of the core transaction system database and related foundational platform systems.

2. Design and implement high availability solutions for databases to ensure 99.99% or higher availability.

3. Perform fault diagnosis and emergency response, analyzing and resolving database performance issues while accurately identifying root causes in a timely manner.

4. Optimize SQL, providing suggestions for improvement and optimization of problematic SQL queries.

5. Conduct forward-looking research on database technologies and promote their implementation and usage.

6. Provide technical consultation and system support services to project managers or system leaders.

Qualifications:

1. Over 3 years of work experience, including at least 3 years in dedicated SQL Server database operation management and technical support.

2. Proficient in using Performance Dashboard, SQL Profiler, and related diagnostic tools

3. In-depth understanding of indexing, physical and logical storage, execution plans, and blocking and deadlocking

4. Skilled in backup and restoration, DBCC, database clustering, mirroring, replication, and distribution, with a strong understanding of relevant Windows platform knowledge (clustering/AD domain). Candidates with experience in two or more database technologies, including SQL Server, will be preferred.

5. Familiar with Linux, Windows, IIS, SQL Server, Apache/Nginx, MySQL.

6. Knowledgeable about the architecture, replication, high availability, monitoring, and backup mechanisms of SQL Server and MySQL, with practical maintenance experience preferred

7. Proficient in SQL statements for SQL Server and MySQL, including writing stored procedures and designing table structures.

8. Detail-oriented, patient, calm under pressure, responsible, willing to research technology, and highly interested in DBA work, with good communication skills and a spirit of teamwork.

Process Associate Engineer (Die Prep) is responsible to support the engineering activities as well as the daily production activities reliably and efficiently.

Candidates with related experience in semiconductor and/or electronics manufacturing industry are encouraged to apply for this position.

Responsibilities

• Ensure process integrity for machine related to production
• Process monitoring via SPC / real time monitoring system
• Work on process improvement projects
• Handle disposition and on hold lots
• Maintain good housekeeping in the production area
• Support in recipe setup and qualification for production
• Assist to troubleshoot process-related issue
• Collect engineering data
• Any other ad-hoc duties as assigned by reporting supervisor

Requirement

• Minimum diploma in electrical / mechatronics / mechanical/ microelectronics engineering or similar discipline
• Minimum 2 years’ experience working in semiconductor manufacturing environment
• Minimum 2 years of experience working in Die Preparation process such as Backgrind, Dicing and Laser-grooving.
• Knowledge in basic SPC and Microsoft Office
• Flexible to work under various shift pattern. The selected candidate will start with office hours first, and eventually work on 12-hour rotating shift (day and night)

Equipment Engineer (Pick and Place) will provide technical leadership to startup of next generation of Fanout packaging equipment, optimize equipment capability, quality, and utilization through CIP to meet company's goals.

Responsibilities

• Have an in-depth understanding of how Precision die PNP, Pick & Place process equipment working principle and how critical parameters will impact downstream process and to work together with process counterpart to resolve complex integration issues.
• Manage and plan new equipment start-up to support production
• Establish Preventive Maintenance (PM) plans for all equipment and optimize PM for quality, cost, and productivity.
• Liaise with vendors to resolve equipment issues and improve equipment performance
• Identify and assess any safety and product risks, recommends risk eliminations, and control risk through mitigations and safe work procedures.
• Work on continuous improvement projects to improve equipment efficiency and address issues
• Setup tracking system to monitor expenditures
• Provide feedback, guidance and training to AEs
• Familiar and follow up on SPSR, MRB, 8D, TECN, ECN ISO9001/QS9000/TQM documentation for closure of issues / setup system.
• Familiar and update specifications to meet company Quality Standard requirements
• Familiar with SPC, DOE, FDC, ECMS and all the statistical analysis tools to help optimizing equipment robustness.
• Establish and maintain essential spare parts stock inventory

Requirements

• Minimum bachelor's degree in Electrical / Electronics / Mechanical / Mechatronics / Microelectronics Engineering
• Minimum 3 years of relevant experience in equipment engineering, preferably in a semiconductir/LCD/Electronics/Electrical industry
• Hands-on experience in equipment maintenance or troubleshooting.
• Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.
• Proven ability to identify, assess and solve problem

Preferred Qualifications

• Prior experience in Advanced Packaging/foundry or similar industry background with high precision Pick & Place experience will be an added advantage
• Strong analytical with good interpersonal skills and Integrity
• Ability to work under pressure & in a Dynamic Environment

• Position : Sales & Project Engineer (Equipment) – Up to $4,000 Basic – Boon Lay - No Experience Required!
• Location : Boon Lay
• Working hours : 5 Days Work Week – 8.45 AM to 6.15 PM
• Salary (commensurate with experience): Up to $4,500 + Performance Bonus + Medical & Dental + Hospital Insurance + Company Van provided
• Duration : Permanent
• Industry : Supply of Equipment for Key Environmental Protection Projects

Main Responsibilities:

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and interpreting customers’ requirements by talking to them and assessing equipment needs, preparing and delivering of sales proposals, technical presentations, show how the company’s products are better than the competitors and following up with suppliers and stake holders.
• Execute and follow through the sales plan set by the manager with the aim to expand the company’s customer base and ensure its strong presence in Singapore.
• Work as a team to gather information to submit tender.
• Continuously improve on own’s knowledge on supplier’s products with the aim to introduce technology that add value to the customers.
• Review sales activities with the management on a weekly basis, including the status of prospective customers, plans to meet sales goals and status on deadlines.
• Working with the Sales Manager, produces report regularly to communicate with supplier on sales activities and status of project.
• Any other ad-hoc duties as assigned

Requirements:

• Minimum Diploma in Engineering
• Minimum 1 year of related experience or no experience is welcome too!
• Must posses Class 3 Driving License
• Bilingual in English and Mandarin to liaise with Chinese clients who can converse in Mandarin only

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jeslyn Tan

Associate Consulting Director (APAC)

Reg no.: R21101247 | EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.