Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Project Engineer (Mechanical / Electrical Engineering)

We are currently seeking a highly organized and detail-oriented individual to join our team as a Project Engineer. In this role, you will be responsible for overseeing and managing various engineering projects from conception to completion. You will work closely with cross-functional teams to ensure projects are delivered on time, within budget, and meet the required standards.

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders
• Good knowledge or certified in WSH.

Requirements

• Bachelor's degree in electrical/electronic/mechanical engineering with 2 years of experience
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application and AUTOCAD
• Proven experience in project management, preferably in an engineering or construction setting
• Strong knowledge of project management methodologies and tools
• Solid understanding of engineering principles and construction processes
• Exceptional problem-solving skills and the ability to think critically.
• Strong organizational and time management skills with the ability to prioritize tasks effectively.
• Ability to work well under pressure and meet tight deadlines.
• Detail-oriented and able to maintain a high level of accuracy in all work activities.
• Excellent team player with the ability to collaborate effectively with cross-functional teams.
• Professional certification in project management is a plus.
• Familiar with relevant WSH certification courses for commercial and industrial areas.

We are looking for a talented and ambitious candidate to join our team in developing next-generation quantum sensors. The position will focus on modeling the dynamics and fabricating cryogenic components for the superconducting levitation of ferromagnetic particles.

This levitated, freely precessing particle forms a system of correlated spins, capable of rapidly averaging out quantum uncertainty. By harnessing this system, we aim to develop quantum sensors with sensitivities that exceed the standard quantum limit.

This position is based in the Quantum Innovation Centre (Q.Inc) and Institute of Materials Research and Engineering (IMRE). The successful candidate will contribute to a range of innovative activities, including:

Key Responsibilities:

• Modeling the dynamics of the levitated particle
• Microfabrication of the particle, silicon pocket, and superconducting materials
• Learning to operate a dilution refrigerator

Job Requirements:

• Bachelor's or master’s in physics, Applied Physics, Precise Instrumentation, or related fields
• Past experience in the job activities listed above is preferred, but a strong willingness to learn is sufficient. Trainings will be provided.
• Strong motivation for multidisciplinary research
• Prior experience in superconductivity and/or quantum sensing is highly preferred
• Basic programming skills (e.g., Python, MATLAB)
• Mechanical design
• Ability to work as a team and communicate effectively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Position Summary / Project Description

Data Engineer for cloud migration projects (Primarily utilizing AWS, IDMC, Databricks and Tableau)

Role and Responsibilities

• Develop ETL (Extract, Transform, Load) processes to cleanse, transform, and enrich data, making it suitable for analytical purposes using Databricks' Spark capabilities and Informatica IDMC for data transformation and quality.

• Monitor and optimize data processing and query performance in both AWS and Databricks environments, making necessary adjustments to meet performance and scalability requirements. Utilize Informatica IDMC for optimizing data workflows.

• Implement security best practices and data encryption methods to protect sensitive data in both AWS and Databricks, while ensuring compliance with data privacy regulations. Employ Informatica IDMC for data governance and compliance.

• Implement automation for routine tasks, such as data ingestion, transformation, and monitoring, using AWS services like AWS Step Functions, AWS Lambda, Databricks Jobs, and Informatica IDMC for workflow automation.

• Maintain clear and comprehensive documentation of data infrastructure, pipelines, and configurations in both AWS and Databricks environments, with metadata management facilitated by Informatica IDMC.

• Collaborate with cross-functional teams, including data scientists, analysts, and software engineers, to understand data requirements and deliver appropriate solutions across AWS, Databricks, and Informatica IDMC.

• Identify and resolve data-related issues and provide support to ensure data availability and integrity in both AWS, Databricks, and Informatica IDMC environments.

• Optimize AWS, Databricks, and Informatica resource usage to control costs while meeting performance and scalability requirements.

• Stay up-to-date with AWS, Databricks, Informatica IDMC services, and data engineering best practices to recommend and implement new technologies and techniques.

Requirements / Qualifications

• Bachelor’s or master’s degree in computer science, data engineering, or a related field.

• Minimum 4 years of experience in data engineering, with expertise in AWS services, Databricks, and/or Informatica IDMC.

• Proficiency in programming languages such as Python, Java, or Scala for building data pipelines.

• Evaluate potential technical solutions and make recommendations to resolve data issues especially on performance assessment for complex data transformations and long running data processes.

• Strong knowledge of SQL and NoSQL databases.

• Familiarity with data modeling and schema design.

• Excellent problem-solving and analytical skills.

• Strong communication and collaboration skills.

• AWS certifications, Databricks certifications, and Informatica certifications are a plus.

Project Engineer (Electrical & Electronic)

As a Project Engineer, your role will involve analysing project requirements, developing project plans, conducting feasibility studies, and coordinating project resources. You will also be responsible for monitoring project progress, identifying potential issues, and implementing corrective actions when necessary. Additionally, you will collaborate with external stakeholders, such as clients and contractors, to ensure effective communication and successful project outcomes.

To excel in this position, you must possess strong project management skills, technical expertise, and excellent problem-solving abilities. You should be able to work well under pressure and manage multiple projects simultaneously. Exceptional communication and interpersonal skills are also essential for effectively collaborating with various stakeholders.

Responsibilities

• Develop and implement project plans based on project scope and objectives
• Conduct feasibility studies and perform risk assessments to ensure project viability
• Coordinate and allocate project resources, including personnel, materials, and equipment
• Monitor project progress and ensure adherence to timelines, budget, and quality standards
• Collaborate with cross-functional teams to identify and resolve project issues
• Conduct regular project meetings to provide updates, discuss challenges, and make decisions
• Prepare and present project reports, including status updates and performance metrics
• Maintain effective communication with clients, contractors, and other external stakeholders

Requirement

• Candidate must possess a Bachelor's Degree in Engineering (Electronic & Electrical).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Position: Project Engineer (Civil and Structural)

Responsibilities:

· To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.

· Prepare method statements, design plans, and specifications.

· Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.

· Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.

· Determine project requirements and estimate resources such as manpower, materials and equipment.

· Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.

· Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.

· Other job duties as assigned.

Requirements:

• Candidate must possess a Bachelor's Degree in Engineering (Civil and Structural).
• Familiar and experience in ISO certifications and WSH.
• Excellent communication and interpersonal skills, both verbal and written in English.
• Good skills in using MS Office application, AUTOCAD and SolidWorks.
• At least 2 years of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or Mechanical equivalent.
• Experience in handling both consultants and clients will be added advantage
• Strong working knowledge of relevant codes of practice, building regulations, and authority submission and approval procedures.
• Proficiency in engineering design software and analysis tools.
• Excellent communication, collaboration, and interpersonal skills.
• Ability to manage multiple tasks effectively and prioritise deadlines.

Key responsibilities:

• Provide IT support operation on daily basis, include below activities:

- IT asset management (include the hardware and software) – manage all company IT asset with proper traceability record;

- Support HR on all employee on-board/off-board process including IT training;

- Provide all IT system setup and admin work; (file control, VPN setup and special software admin work support);

- IT Level 1 helpdesk support to all company staff include remote user from worldwide, it could be PC issue, office printer, phone system or network related issues;

- Troubleshooting AD/DC, Exchange server, File Server and Application server issues and provide a solution.

- Troubleshoot and configure the firewall, router and switch when issues arises.

- Escalate to 3rd party IT support vendor if issue couldn’t be fixed within same day, coordinate with IT support vendor resolve issues within TAT, document down for all IT issues and solutions in return document;

- Liaise with IT vendor management, include IT hardware/software quotation, costing, PR process and make proposal if any recommend system tools).

• System maintenance work on regular basis, include below activities:

- All System backup (File server backup, NAS storage backup, offline backup activity), verify all system backup files are working properly;

- Coordinate department head on storage Clean up include File server, SharePoint and NetApp;

- Monitor Server room temperature and humidity, and make sure all server related equipment (E.g.: UPS) are working under good condition;

- Pulse check all on server, router and firewall log and flag out all abnormal activities immediately;

- Regular update antivirus related tools and window related system patches.

• IT governance and direction:

- Maintain all IT related record (contract, agreement, software authorization, etc.) and regularly updates or renew on time;

- Keep updating and release new IT P&P (Policy & Procedure), BCP(Business Continuity Plan) and DRP(Disaster Recovery Plan);

- Working with finance and country IT support on IT budgeting yearly basis and review it quarterly;

- Assist external or internal auditor on IT compliance or ISO related audit;

- Evaluate vendor proposal and provide justification to management.

• IT related projects management (Ad Hoc or on-going) and provide weekly basis updates to management):

- IT project plan, budgeting and proposal;

- IT project deployment after project approved;

- IT project verification and provide necessary training to end user;

- IT project sign off and documentation.

Additional responsibilities:

• Any reasonable task assigned by management and deemed to be within the individual’s capabilities to ensure smooth running of the business.
• As this is an evolving business, ongoing change is an integral part of the position. Management will liaise with the individual on any fundamental change to work practices. The individual is required to embrace and adopt any change to working practices.

About SHOKZ

As the first bone conduction headset manufacturer in China, Shokz pioneered the foray into patented bone conduction technology and has built itself as a world-renowned headphone brand with its signature open-ear design. Utilising numerous patented acoustics and health technologies, Shokz aims to accelerate the development of their True Wireless Stereo (“TWS”) series, their bone-conduction hearing aid and health product line.

Job Description：

Here, we explore the art of interaction between circuits and human body together. From the collection, processing to transmission of physiological signals, we listen to the body‘s whispers; from the design of status monitoring modules to the analysis of human body composition and signal quality, we objectively record the changes. We are the front-end of signal processing, the foundation of function realization, and the determinant of product ceiling!

Job Scope：

1.Understand systematic knowledge training and advanced training projects.

2.Handle physiological signal processing, including chip selection and architecture design, gain and filtering scheme design, embedded development, board making, and testing.

3.Design multi-circuit functional modules and establish the connection between the designed signals and the human body.

Job Requirement:

1.Bachelor's degree or above, majoring in electronic engineering, microelectronics, automation control, electronic information, mechanical engineering, physics, etc., or having project experience in electronics, sensors, etc., with excellent academic performance and solid professional basic knowledge.

2.Skilled in using electronic design software, with a good foundation in analog and digital electronics.

3.Focused, with a curiosity to explore the nature of things and a pursuit of technological excellence.

4.Clear-minded, good at problem-solving, able to quickly track the world's latest scientific research results, and capable of stimulating innovation.

5.Candidates who have participated in electronic design competitions and won awards, and have experience in electronic or sensor-related projects are preferred.

Permanent, Singapore-based Electronics Service/Application Engineer for Electronics Test and Measurement Instruments. 5 days week (9.00 AM to 6.00 PM) Located near Lavender MRT station.

· Perform hands-on troubleshooting, service and repairs either in house or on-site.

· Provide on-site implementation, commissioning, testing and system integration support.

· On-the-job training is provided.

· Support Existing and New Project

· Any other duties as assign by superior and management

Job Requirements:

· ITE /NiTEC, Diploma in Electronics Electrical Engineering.

· Fresh graduate or 1 year or more working experience

· Preferable experience in Electronics Test and Measurement Instrument/Power Engineering/Battery

· Class 2/3 driver licence.

· Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Job Type: Full-time

Job Types: Full-time, Permanent

Salary: $3,500.00 - $5,500.00 per month

Roles and Responsibilities

Cluster Setup and Maintenance:

• Install, configure, and maintain big data platforms like Hadoop Clusters, Elastic Search, Spark, Kafka, Hive etc.
• Set up and manage distributed file systems (HDFS) and NoSQL databases (HBase, Cassandra).
• Ensuring high availability and reliability of Hadoop, Kafka and Elasticsearch Clusters.

Performance Optimization:

• Monitor system performance, fine-tune jobs, and optimize cluster utilization.
• Manage and resolve performance bottlenecks in big data environments.

Security Management:

• Implement data security policies, user authentication (Kerberos), and access control (Ranger, Knox).
• Regularly review and plan patch systems to ensure data integrity.
• Apply updates, patches, and version upgrades to all managed systems.
• Ensuring the backward compatibility and minimal downtime during upgrades.

Backup and Recovery:

• Plan and implement backup and recovery strategies for big data environments.
• Develop disaster recovery solutions and test failover scenarios.

Workflow Automation:

• Design and implement workflows using tools like Apache Oozie or Apache Airflow.
• Automate cluster management tasks like upgrades and scaling.
• Developing shell scripts and Ansible Playbooks to automate routine tasks, including monitoring, backups, and deployments.

Monitoring and Support:

• Monitor logs, metrics, and system health using tools like Ambari, Cloudera Manager, or Prometheus.
• Provide 24/7 on-call support for production systems and resolve incidents.

Collaboration:

• Work closely with data engineers and developers to support ETL pipelines and data processing jobs.
• Collaborate with stakeholders to ensure big data systems meet organizational needs.
• Working transversally with other teams to guarantee high data quality and availability.

Cloud migration

• Migration planning from On-premises to GCP & AWS cloud

Required Skills and Qualifications

Technical Skills:

• Strong knowledge of big data ecosystems (Hadoop, HDFS, YARN, Hive, HBase, Spark, Kafka and Elastic Search).
• Proficiency in Linux/Unix system administration.
• Experience with monitoring tools like Nagios, Grafana, or Splunk, HPOMI.
• Scripting skills in Python, Ansible, Shell, or Bash.
• Familiarity with cloud platforms (AWS, Azure, GCP) and their big data services.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Effective communication and collaboration skills.
• Ability to handle high-pressure production environments.

Preferred Experience

• 8-9 years of experience in big data administration or similar roles.
• Hands-on experience in scaling and managing large, big data clusters in production environments.

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661)

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R1104661

Business Registration Number: 200611680D. Licence Number: 10C5117

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

This position is for FULL TIME morning/afternoon shifts, and will require some weekend shifts for maintenance and support activities. Work is non-routine and complex, involving the application of advanced technical/business skills in area of specialization. Provide direction and mentoring to others.

As a Principal Site Reliability Engineer, you will be part of the DevSecOps culture who will combine software and systems engineering to build, package, release and integrate tools and applications that will strengthen and innovate in the Cloud space within the Oracle SaaS-at-Customer and OCI DRCC infrastructure.

Responsibilities:

• Team members will engage in operational activities including monitoring, installation, patching, and upgrading of Oracle Fusion Middleware, Fusion Applications, and Oracle database implementations.
• Work on the SaaS Engineering Operations team with full stack deployment and support responsibilities.
• Address extremely complex, critical customer system issues on a routine basis and document technical solutions.
• Work directly with customers, product development, and product support to resolve critical customer application or performance issues in a timely basis.
• Understand the end-to-end configuration, technical dependencies, and overall behavioral characteristics of production services.
• Authority for end-to-end performance and operability.
• Perform frequent planned DR switchovers.
• Utilize a deep understanding of service topology and their dependencies required to troubleshoot issues and define mitigations.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Lead implementation of tools and processes using DevSecOps methodologies to innovate, design, develop, secure, build, release and support fully automated CI/CD pipelines for the development and maintenance of Cloud Infrastructure Services and relevant applications.
• Manage and operate the infrastructure and configuration of microservices with a focus on end-to-end automation and infrastructure as code.
• Perform code development, OCI DRCC region builds, monthly release deployments, operations engineering, and promotion to testing and production environments to support Sprint activities.
• Participate in developing, implementing, and enforcing policies to enhance cloud system security.
• Recommend technical policies and consult with development teams on remediation.
• Collaborate with team members to improve the team's engineering tools, systems, procedures, and security.
• Apply DevSecOps methodologies in assisting to determine the direction of current and future development projects.
• Evangelize security and application solutions and controls by creating and communicating presentations both internally and externally.
• Demonstrate flexibility and resilience in response to changing or ambiguous situations.
• Work across development and operational environments.
• Stay abreast of software testing technologies and best practices.

Minimum Required Experience

• Relevant experience to functional area with around 10 years of experience (7+ years of software engineering and at least 3 years of DevSecOps culture)
• Extensive experience with Oracle RDBMS, Real Application Cluster (RAC), Disaster recovery, WebLogic, Identity Management, Apache/HTTP, Apex and Fusion Middleware and/or other Oracle technologies.
• Experience with cloud solutions and security engineering/design experience on one of the major cloud platforms AWS, GCP, Azure, OCI (preferred).
• Extensive experience in using Terraform for orchestrating application resources and infrastructure in CI/CD platform.
• Extensive experience in DevSecOps culture.
• Extensive experience with scripting and coding languages like shell scripting (must), Python (must), Ruby (plus), Go (plus) but not limited to.
• Experience developing cloud native CI/CD workflows and tools such as Chef, Puppet, Jenkins, Ansible, Rundeck and Git.
• Experience with Release Management cycles and Git.
• Knowledge of storage (ZFS preferred), IP networking, VPN's, DNS, load balancing and firewall (F5).
• Experience with one or more of the following required (Docker, Kubernetes, Terraform, Kafka, Microservices, Machine Learning, Artificial Intelligence)
• Experience with full software development lifecycle and delivery using Agile practices.
• Extensive background in cloud applications, cloud platforms and/or experience providing cloud infrastructure platforms in complex environments.
• Highly self-motivated with the ability to work both independently and with members of a global team without close supervision.

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 24 months
• Start from: End January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of factory OR commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Job summary

Support project delivery across Software Development Life Cycle, including analysis, design, development, QA, UAT, maintenance, and ongoing support

Job Responsibilities:

• Support the delivery of projects in all aspects of Software Development Life Cycle including system analysis, design, development, quality assurance, UAT, maintenance and ongoing support
• Contribute to Agile software development lifecycle and be familiar with DevOps processes
• Collaborate with cross-functional teams to troubleshoot ERP system problems and streamline data exchange with external systems
• Assist in user training to enhance system understanding and utilization
• Analyze business processes to optimize system efficiency and align capabilities with organizational goals
• Gather and document system requirements from stakeholders for enhancement, ensuring data integrity and accuracy
• Customize and configure the ERP system to meet business needs, implementing access controls for security
• Develop reports, dashboards, and custom solutions using development tools and frameworks for insightful system performance analysis
• Stay updated on system releases, industry best practices and continuously identify opportunities for system improvement
• Assist with ad-hoc duties assigned by Manager

Job Requirements:

• Bachelor's degree in Information Technology/ Computer Science or related field
• Minimum 3 years of experience in full stack software development, including 3 cycles of implementation
• Proven expertise in ERP system support, analysis and customization
• Strong troubleshooting skills and proficiency in SQL and database management
• Solid understanding of object-oriented programming (OOP) concepts
• Proficiency in specific ERP development tools and frameworks (e.g., BAQS, Dashboards, BPMs, UD fields)
• Experienced in developing application using .NET Framework, C#
• Advantageous to have experience with Epicor, Navision and Microsoft development technologies like C/AL, Dynamics NAV/ Business Central, .NET and Azure
• Effective communication and interpersonal skills, able to work independently or within a team
• Strong analytical thinking and problem-solving skills, with a keen attention to detail and a commitment to delivering high-quality results

Job Description:

• Perform physical failure analysis using FIB techniques;

• Sample preparation for above related techniques;
• Prepare service report for related customers;
• Document new failure analysis operating procedures, training and certification specs;
• Communicate with customer for selecting proper analytical technique and data interpretation;
• Participate in new failure analysis techniques development and evaluation of new technologies.

Job Requirements:

•Diploma/Degree in Engineering,

• Fresh graduates are also welcome to apply;
• Experience of using FIB/SEM/EDX is highly desired;
• Knowledge of semiconductor devices, hard disk devices, LED etc is a plus;
• Keen to learn and able to perform independent work;
• Able to do night shift work with flexible working periods. (night shift)
• Very attractive allowance will be given for the night shift.

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During System Implementation Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

NetVirta is a fast growing, venture-backed startup in the fashion fit technology space. If you’ve had difficulty shopping online because you couldn’t find clothing or footwear that fit, you’ve experienced the problem we address. It’s an issue that troubles shoppers around the world and NetVirta is uniquely positioned to solve it.

Founded by two MIT graduates and located in Boston and Singapore, NetVirta is the world’s leading fit technology provider for medical, retail and sports equipment brands, helping customers order the right size with precision 3D body scanning. We began serving the medical industry in 2013, helping doctors scan medical patients to create custom-fit orthotics and prosthetics. In 2017, we expanded to enable NFL and NCAA football players to obtain custom-fit helmets. Fast forward to 2022, NetVirta’s closed deals with multiple clothing and footwear brands in North America, Europe, and Asia.

We are proud to be certified as Great Place to Work® in Singapore.

What can you expect?

We are seeking a Machine Learning Engineer / Researcher who will assist the development and deployment of advanced machine learning models to power our recommendation system and search engine. In this role, you will have opportunities to work with state-of-the-art AI techniques, including large language and vision models, integrating them to complement our recommendation system and search architecture. You will also play a vital role in maintaining and evolving our AI systems throughout the different growth stages.

Responsibilities

• Build scalable recommendation and search engines tailored to fashion content.
• Lead the design, development, and optimization of machine learning models, especially in the context of fashion recommendation systems and search engines.
• Integrate various techniques to help tackle cold start problems, including

1. Content-based recommendation
2. Leveraging implicit user interaction signals
3. Large language (vision) models

Required Skills & Experience

• Bachelor’s, Master’s or PhD degree in Machine Learning, Computer Science, or a related field.
• Experience with Python and machine learning frameworks (eg., TensorFlow, PyTorch).
• Prior hands-on experience with recommendation & search systems and knowledge of its key components (retrieval, re-ranking, cold-start, etc).
• Familiarity with using large language models and computer vision techniques.
• Ability to collaborate in a fast-paced, cross-functional environment with strong communication and teamwork skills.

Good-To-Have

• Knowledge of reinforcement learning (e.g. multi-armed bandits and related techniques).
• Prior industry experience with A/B tests in the context of recommendation systems.
• Good understanding of the infrastructure behind large-scale recommendation and search systems.

What else is awaiting you?

• Career development opportunities, like mentoring, career exploration through a Japanese concept called Ikigai.
• Learning is fundamental to our culture, your growth together with Netvirta's are paramount to how we can transform the industry.
• Besides hard work, we value your well-being and want you to have fun too! Attractive compensation and benefits as well as engagement and welfare activities awaits you.
• Work alongside with friendly colleagues in a positive environment.

You will be involved in the end-to-end agile development lifecycle for in-house RPA and AI/ ML projects starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Provide mentorship, evaluate submitted problem statements and work with Product Owner and/or Citizen Developers to automate potential day-to-day processes and workflows using Robotic Process Automation and AI/ ML (RPA)

2. Work with UI/ UX Designer as they engage the Product Owner and stakeholders for user research to produce the User Journey Maps and high-fidelity wireframes, which feeds into development sprints (where required)

3. Develop clean, efficient and extendable codes using C, C++, Java and other relevant programming languages, which includes understanding code refactoring and design patterns to reduce and/or eliminate technical debt (where required)

4. Work with Cloud Engineers to setup cloud services for deployment on Government Commercial Cloud (where required)

5. Work with Quality Assurance Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

6. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively (where required)

7. Maintain and update library of reusable code snippets, components and modules

8. Develop technical documentation to guide future RPA and AI/ ML development projects

9. Identify best practices and continuous improvement in deployed automations

10. Conduct RPA and AI/ML-related brown bags and information sessions for staff to share knowledge and increase adoption

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as Python, C, C++, Java and other relevant programming languages.

3. Good technical knowledge and experience working with RPA tools such as Blue Prism, UiPath, etc as well as basic understanding of foundation models from Microsoft, AWS and Google.

4. Participated in at least one full software or product development cycle, preferably using Agile Methodology

5. Excellent communication skills

6. Teamwork and collaboration skills

7. Possess critical thinking and problem-solving skills

Wärtsilä is a world leader in marine technology and leading the industry's transformation towards a decarbonised and sustainable future. With the world’s widest portfolio and service network, we – Wärtsilians - deliver efficient, safe and sustainable integrated products and solutions to enhance the business of our customers. The opportunities presented through digitalisation and new technologies are offering a new era of shipping. Did you know that shipping is the world’s most efficient mode of transportation and that approximately 90% of world trade is carried by sea?

We want to change the course towards an interconnected and cleaner maritime future and are constantly on the lookout for future-oriented talent to join our team and to work towards enabling sustainable societies through innovation in technology and services - together. Are you ready to jump onboard?

We are looking for a Service Engineer, 2-stroke Services. This is a permanent opportunity, and its location is Singapore.

As a Service Engineer, 2-stroke Services, your responsibilities for the role include:

- Perform Field Service activities according to the work plan

- Perform mechanical/electrical and troubleshooting on 2-stroke engines and ancillary equipment

- Perform technical advisory for repair activities executed on customers' responsibility

- Commissioning of service products

- On-site team leading and managing of the assigned team and related activities during the work execution

- Interact with customers during the work execution

- Interacting with Field Services back office and Technical Services during work execution

- Perform internal and external progress status up-dates of the assigned work

- Ensure that the work is executed according to Wärtsilä Quality, Health, Safety, and Environmental guidelines and customer site procedures.

- Create the Service Work Reports

- Proactively consulting, advising, and promoting available Wärtsilä solutions and products to customer

To be successful in this role, we expect you to have:

- BSC Degree with 2-5 years of working experience in the related field

- Diploma in mechanical, and marine engineering with more than 5 years of working experience in the related field

- Excellent technical knowledge and problem-solving skills

- Good command of English, both written and oral

- Ability to work independently

- Willingness and flexibility to travel up to 80% of the time

- Ability to create internal and external work reports

- Ability to communicate and interact well with customers and other stakeholders

- Literacy in Information Management Applications/ Tools such as MS Office

At Wärtsilä we value, respect and embrace all our differences, and are committed to diversity, inclusion and equal employment opportunities; everyone can be their true self and succeed based on their job-relevant merits and abilities.

This is Wärtsilä

Wärtsilä is a global leader in innovative technologies and lifecycle solutions for the marine and energy markets. Our team of 17,000 professionals, in more than 200 locations in 68 countries, shape the decarbonisation transformation of our industries across the globe. Read more on www.wartsila.com.

Contact & next steps

Does this sound like the job for you? If yes, we hope to hear from you before the application deadline by submitting your application through our careers portal. Are you still wondering if you should apply and would like to get something clarified? Please reach out to David Samuel, Talent Acquisition Specialist ([email protected]) with any questions related to this position.

#FSWSCareers

Job Description

• Deep dive into development lines, learning and understanding the mechanism of every application component, and promoting product scalability, stability and performance.
• Setup, manage and maintain product, middleware, big-data applications and services.
• Perform regular and ad-hoc server-side deployments, performance fine-tuning and troubleshooting.
• Design and develop automations for workflows.
• Capacity and Resource management.
• Responsible for the full-chain stress test to enhance the performance and remove redundancy of applications.
• Prepare routine operation documentation.

Job Requirements

• Bachelor’s or higher degree in Computer Science, Engineering, Information Systems or related fields.
• Minimum 3 years of working experience in Site Reliability Engineer roles.
• Extensive and hands-on knowledge with Linux operating systems (Ubuntu, CentOS, etc.).
• Knowledge of Computer Network(TCP/IP, DNS, etc.) and OS.
• Hands-on experience with at least one of the programming languages: Bash, Python, Go.
• Strong analytical and problem-solving skills with the ability to thrive under difficult and stressful situations.
• Passion and high sense of responsibility for work.
• Fast learning ability and a good team player.
• Detailed-oriented, cautious and prudent.

Skills below are optional but preferable:

• Experience with automation tools like Ansible, Jenkins.
• Experience with monitoring tools like Prometheus, Zabbix, Grafana etc.
• Experience with load balancing tools like LVS, Nginx, Openresty or HAProxy.
• Experience with container technology such as Docker, Kubernetes.
• Experience with Kafka and Codis

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.
CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment

Learn more about CQT at www.quantumlah.org

Job Description

The Centre for Quantum Technologies (CQT), National University of Singapore is looking for researchers and engineers to develop next generation quantum computers based on trapped ions. There are multiple positions available at different levels with a diverse set of expertise. This program is funded under the National Quantum Processor Initiative, a flagship program under the National Quantum Office Singapore. The aim of the program is to develop a full stack quantum processor based on Yb-Ba ions. This program brings together the unique capabilities of the existing ion trap groups in CQT expertizing on these two-ion species to explore scalability of the system.

The Centre for Quantum Technologies is a pioneering quantum centre in the world offering a diverse research culture at the intersection of three different fields namely, theoretical, experimental Physics and computer science. We offer competitive salary and enriching intellectual experience in a city state known for its forward outlook. This program also allows strong collaboration with leading academic and industrial groups within and outside the country.

The team members will work to build hardware for the next generation of the ion trap quantum processor. This includes design and implementation of the modular and compact optical system for the laser beam modulation using acousto-optical and electro-optical modulators, delivery of the beams to the inside the vacuum chamber, and implementation of the diffraction limited optical system for ion imaging and addressing of the individual ions with the laser beams.

The successful candidate will be involved in all stages of the development cycle: collaborate with team members to define technical requirements, design, test and integrate the optical systems in the final product.

Job Requirements

We are looking for several optical engineers to join the small team of scientists and engineers working on the next generation of the ion trap quantum processor. The candidate should have:

• Ph.D. in optical engineering, physics or related areas;
• At least 1-2 years of experience in optical design, implementation and testing of the optical or laser systems is preferred.
• Experience in optical design, familiar with optical (for example, Zemax or OSLO) and mechanical (Autodesk or Solidwork) CAD software, able to assemble and test complex optical systems.

Product area

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

Job description

Our thirst for technology is a part of everything we do. The Data Center Engineering team takes the physical design of our data centers into the future. Our lab mirrors a research and development department -- cutting-edge strategies are born, tested and tested again. Along with a team of great minds, you take on complex topics like how we use power or how to run state-of-the-art, environmentally-friendly facilities. You're a visionary who optimizes for efficiencies and never stops seeking improvements -- even small changes that can make a huge impact. You generate ideas, communicate recommendations to senior-level executives and drive implementation alongside facilities technicians.

With your technical expertise, you ensure compliance with codes and standards, develop infrastructure improvements and serve as an expert in your specialty (e.g., cooling, electrical).

Qualifications

Job responsibilities

• Define data center system-level, product architecture, and Research and Development, while helping to develop operations and maintenance procedures for systems/processes.
• Conduct engineering analysis and research designs and methods of data center equipment and facilities.
• Ensure designs and installations meet requirements (e.g., predicted cooling, structural, operational concerns, etc.).
• Serve as Technical Lead in the region. Collaborate with Operations, Execution, and Construction teams to develop new data center (DC) mechanical infrastructure products and systems.

Minimum qualifications

• Bachelor's degree in Mechanical or Industrial Engineering, related discipline, or equivalent practical experience.
• 10 years of experience in mission critical facility design and construction environments.
• Experience in mission critical facilities and their mechanical infrastructure.

Preferred qualifications

• Master's degree in Engineering, Business or relevant field, or professional engineering license.
• Experience in estimating, mechanical design, operation, and commissioning of mission critical data center mechanical equipment.
• Experience in design, construction, and commissioning of mechanical cooling plants, fire suppression systems, fuel oil systems, domestic water systems, and sanitary sewer systems in mission critical facility design and construction environment.
• Experience designing modular building scale assemblies, with an understanding of mechanical tolerances and tolerance analysis.
• Knowledge of mechanical engineering and design principles with expertise in medium-scale production, structural beams/elements, and international building codes.
• Operational knowledge of construction safety procedures.

Seeking a Frontend Software Engineer to design and implement user interface components for dynamic web applications in ReactJS.

This role involves translating wireframes and mockups into clean, efficient code and collaborating with cross-functional teams to ensure seamless integration with backend services.

You will be responsible for building reusable components, optimizing performance across devices and browsers, and contributing to the development of high-quality, scalable applications.

This is a permanent full-time role

YOUR NEW JOB

• Transform designs into high-quality, responsive Frontend code using ReactJS, HTML5, CSS3, WebSocket
• Develop, test, deploy, & maintain Frontend user interface components with a focus on usability & scalability
• Leverage modern web technologies to create dynamic, interactive web applications
• Build reusable components and frontend libraries to streamline future development
• Optimize web components for performance across a wide array of web-capable devices & browsers
• Collaborate with the design team to enhance overall UI/UX experiences
• Integrate APIs using RESTful services for seamless backend communication
• Work with cross-functional teams to plan, design, & maintain web-based applications built on Java technologies
• Deploy production systems and provide support post-implementation.
• Engage in all phases of the software development lifecycle, ensuring quality and consistency
• Investigate and resolve system issues, ensuring minimal downtime at all times
• Analyze service interdependencies (applications, systems, databases) to identify & address inefficiencies
• Propose and document opportunities for application & process improvements
• Deliver timely solutions while adhering to high development standards

WHAT IS NEEDED FROM YOU

• 3 years hands-on fulltime working experience in ReactJS
• Proven experience in developing web applications, web forms, & enterprise workflows
• 2+ years of expertise in systems analysis, design, and programming
• Hands-on proficiency in:
  Modern JavaScript frameworks such as ReactJS, with a solid understanding of core principles
  JavaScript, including DOM manipulation and modern ECMAScript features
  TypeScript or other type-safe JavaScript variants
  Advanced HTML5 and CSS3
  CSS pre-processors (e.g., SASS, SCSS, LESS) and bundlers (e.g., Webpack)
  RESTful API integration
  Basic knowledge of data structures and algorithms
  Version control systems like Git
• Strong skills in benchmarking and performance optimization
• Fluency in English and Mandarin for effective business communication with Client & Internally

WHAT WILL MAKE YOU STAND OUT

• Experience coding for Mobile Gaming applications
• Mobile App Development Experience (React Native, iOS, Android)
• Experience with WebSocket
• Familiarity with JQuery
• Knowledge of UI/UX design principles
• Understanding of npm & its usage
• Hands-on experience with AWS Services
• Setting up CI/CD Pipelines
• Writing Unit Tests or End To End Testing