Job Descriptions

• Pre Project site evaluation of electrical product/meter location and perform range test
• Develops wiring diagrams, layout drawings, and as built drawings for system or equipment modifications or expansion and directs personnel performing installation and maintenance duties.
• Installation, testing and commissioning of repeaters or wireless devices
• Follow safe work procedures to remove/ Install electrical products/meter on site
• Conduct Testing and commissioning of installed electrical products
• Ensure Testing and Commissioning reports in proper order
• Preventive Maintenance (Thermoscan/ Eeprom Downloading/ Data/System Backup)
• Perform troubleshooting and perform appropriate corrective solutions for operational equipment where appropriate
• Soldering of electronics parts
• Internal wiring/ assembly of electrical products/meter
• Burning of firmware
• Testing of defective meters
• Project Coordination to ensure works being carry out as per schedule given by working with partners or contractors
• Manage enquiries, feedback and any other operational issues
• Carries out Site survey, Project management, documentation, testing, user training and commissioning
• To ensure timely completion of schedules and new projects start up through efficient coordination of all function groups both internal and external.
• Team player

Requirements:

• Minimum ITE, NTC/ITC, NITEC in Electrical Engineering or any similar qualifications
• Ability to read and comprehend electrical drawings
• Knowledge of firmware is a plus
• Ability to multi-task and effectively manage concurrent initiatives
• Strong interest in electronics engineering and firmware
• Ability to work effectively in a dynamic working environment.
• Applicant must be willing to work during weekend when required.
• Able to draw Autocad (Would be advantage)
• Minimum 3 years relevant experience

Only shortlisted candidates will be notified.

Job Description:
We are looking for a highly skilled Physical Chip Design Engineer to lead the development of low-power and high-performance chip design processes. This is a critical role that requires deep expertise in advanced semiconductor technologies and the ability to drive full-chip physical design workflows from start to finish.

Key Responsibilities:

• Low-Power Physical Design Workflows: Lead and optimize processes to enhance energy efficiency while maintaining chip performance.
• Full-Chip Floor Planning & Place-and-Route: Oversee floor planning to ensure optimal performance, power, and area. Manage place-and-route processes for efficient, functional designs.
• Power Network Design & Analysis: Design and optimize power distribution networks, perform grid analysis to ensure power integrity and low-power design.
• Timing Closure, Power Integrity, & Signal Integrity: Resolve timing challenges, ensure power and signal integrity signoff, and perform necessary optimizations.
• Physical Verification (DRC & LVS): Conduct thorough physical verification, including Design Rule Checks (DRC) and Layout Versus Schematic (LVS) to ensure compliance with design specifications.

Qualifications:

• Education: Bachelor’s degree or higher in Electronics, Electrical Engineering, Computer Science, or related field. Advanced degrees (Master’s/Ph.D.) are a plus.
• Experience: 4-5 years of hands-on experience in physical design, with expertise in low-power, high-performance chip design. Experience with 12nm and below semiconductor technologies and tape-out processes is essential.
• Technical Skills:
  • Expertise in full-chip floor planning, place-and-route methodologies, and physical verification (including DRC and LVS).
  • In-depth knowledge of power network design, IR drop analysis, and timing closure.
  • Proficiency in Synopsys IC Compiler, Cadence Innovus, or similar tools.
  • Proficiency with Static Timing Analysis (STA) tools.
• Programming Skills: Strong scripting skills in Perl, TCL, Python, and C++.

Job Summary:

We are looking for an Architecture Design Engineer to focus on the development and optimization of AI Chip hardware systems. This highly technical role involves designing simulators, optimizing AI chips at various levels, and developing front-end code to ensure AI chip functionality and performance.

Key Responsibilities:

• Simulator Design:
  Utilize tools like GEM5 to design and develop simulators for AI chips, ensuring accuracy and efficiency in simulating chip behavior across various workloads.
• Performance Optimization:
  Optimize AI chips at:
  • Algorithm Level: Enhance computational algorithms for efficiency.
  • Architecture Level: Design and refine the overall chip structure.
  • Circuit Level: Improve low-level electrical performance.
• Front-End Code Development:
  Write, test, and optimize front-end code for AI chip functionality, ensuring compatibility with the chip’s architecture.

Qualifications:

• Educational Background:
  Minimum Bachelor's degree in Computer Science, Electronics, or a related field. Advanced degrees are a plus.
• Technical Knowledge:
  • Strong understanding of computer architecture and AI hardware accelerators (e.g., GPUs).
  • Familiarity with memory access patterns in AI models and effective memory handling.

Job Description:
We are looking for a skilled and innovative AI System Hardware Engineer to join our team. In this role, you will take ownership of the full hardware R&D process, drive innovation, and ensure high-quality deliverables. If you’re passionate about cutting-edge hardware design and enjoy tackling complex challenges, we’d love to hear from you.

Key Responsibilities:

Lead the entire hardware R&D process, including:

• ASIC bring-up
• Developing hardware design schemes
• Selecting components
• Designing schematics and inspecting PCBs
• Conducting testing, debugging, and ensuring successful mass production
• Design innovative hardware solutions that enhance product functionality, performance, cost efficiency, and quality.

Qualifications:

• Education:Bachelor’s degree or higher in Computer Science, Electronics Engineering, or a related field.
• Technical Skills:Strong understanding of high-speed signal integrity and power distribution techniques.
  Familiarity with modern processors, including GPUs, FPGAs, and X86 architecture.
• Experience:Proven experience with ASIC bring-up and hardware validation.
  Proficient in using testing tools such as power sources, loads, and oscilloscopes.
• Tools:Expertise in hardware design software such as Cadence, Allegro, or similar tools.
  

Job Description:
We are seeking a skilled Data Engineer with expertise in AWS cloud computing and database administration to join our team. In this role, you will design, implement, and manage scalable data solutions while maintaining and optimizing databases to ensure high performance and reliability..

Job Responsibilities:

• Design, deploy, maintain, and optimize database systems (Oracle, MySQL, SQL Server), including installation, configuration, backup, and recovery.
• Monitor and optimize database performance to improve response time, stability, and reliability.
• Plan and expand database capacity to ensure scalability and meet business requirements.
• Deploy and manage cloud infrastructure on AWS, including servers, networks, storage, and other resources, to provide a stable and reliable environment.
• Create, configure, and maintain AWS services to align with business needs, selecting appropriate services based on requirements.
• Implement and manage monitoring tools to track the performance and operational status of databases and AWS environments, proactively identifying and resolving potential issues.
• Collaborate with cross-functional teams to deliver efficient, scalable, and reliable cloud and database solutions.

Job Requirements:

• Bachelor’s degree or higher in Computer Science, Information Systems, or related fields.
• Minimum of 3+ years of experience in database administration (with hands-on experience in Oracle, MySQL, or SQL Server).
• Strong experience with AWS services and managing cloud infrastructure.
• In-depth knowledge of database performance tuning, troubleshooting, and optimization techniques.
• Familiarity with cloud networking concepts and using monitoring tools for AWS environments.
• Strong communication and problem-solving skills to handle technical challenges effectively.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design, develop, prototype, integrate and test advanced robotic mechatronic system and sub-system (sensing, manipulation, control, human-interaction, etc…)
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for mechatronic system development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable mechatronic sub-systems to be integrated into various AMR platforms
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Troubleshooting of robotic system / subsystem / module using development tools, specialized equipment and standard lab equipment
• Adopting latest standards and/or methodology to work (standards, open source, common platform)

Requirements:

• Degree/Masters in Mechatronics or Electronics Engineering or equivalent
• 4-6 years of relevant experience in mechatronic system design, development, and integration
• Passionate in robotic manipulation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in mechatronics CAD design tools such as Altium, PADS, AutoCAD or similar
• Balanced skills and experiences in mechanical design, basic electrical circuitry and microcontroller programming
• Proficient in programming languages such as Python and C++, and/or other languages
• Hands on experience in commissioning of industrial robots/mobile robots/mobile manipulator
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player
• Strong in written and verbal communication in English

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

As a Senior Frontend (Full Stack) Engineer, you will be responsible for designing, developing, and maintaining our data product suite. You will work closely with cross-functional teams including data scientists, data engineers, and UX/UI developers to create scalable, robust, and user-friendly applications. Your expertise in both front-end and back-end development will be crucial in implementing innovative features and ensuring seamless integration between different components of our data products. This role requires strong problemsolving skills, a deep understanding of data processing and visualization techniques, and a passion for delivering high-quality software solutions.

Responsibilities

• Collaborate with product owner, data scientists, data engineers and designers to understand product requirements and translate them into technical specifications.
• Design and develop full-stack solutions, including user interfaces, APIs, data processing and storage.
• Implement data visualization components using modern front-end frameworks and libraries.
• Develop scalable and efficient back-end services to handle data from multiple data source with complex business logic.
• Optimize application performance and ensure high availability and reliability.
• Conduct code reviews, ensure seamless deployment and testing of the data products and provide constructive feedback.
• Stay updated with the latest industry trends and best practices in full-stack development, data engineering, and data visualization.
• Troubleshoot and resolve issues reported by users, ensuring a smooth user experience.
• Continuously improve software development processes and contribute to the overall technical excellence of the team

• Bachelor's or master's degree in Computer Science, Software Engineering, or a related field.
• 5+ years of professional experience as a Full Stack Engineer, with a focus on datadriven applications.
• Strong proficiency in JavaScript, HTML, CSS, and modern front-end frameworks (e.g., React is preferred as we use React in our team).
• Expertise in server-side programming languages such as Node.js, Python or Java.
• In-depth knowledge of databases and SQL, with experience in designing and optimizing data models.
• Familiarity with data processing frameworks (e.g., Apache Spark) and big data technologies (e.g., Kafka) is a plus.
• Solid understanding of RESTful APIs and microservices architecture.
• Experience with cloud platforms (e.g., Azure, AWS) and containerization technologies (e.g., Docker, Kubernetes).
• Proficiency in version control systems (e.g., Git)
• Excellent problem-solving skills and the ability to debug complex issues in a distributed system.
• Strong communication skills and the ability to work effectively in a collaborative team environment.
• Prior experience working on data products or analytics platforms is highly desirable.

Main Responsibilities

1. Plan and execute layout designs for modules or single-chip circuits, including routing and verification tasks such as DRC, LVS, and EM checks.
2. Enhance product performance through optimized layout design techniques.
3. Collaborate effectively with design engineers to achieve layout design objectives.
4. Prepare and review tape-out data for accuracy and completeness.
5. Draft layout design documentation.

Requirements

1. Bachelor’s degree or higher in Electronics, Microelectronics, or related fields.
2. Direct experience in analog and mixed-signal IC layout design; familiarity with EDA tools such as Virtuoso, Calibre, and EM verification tools.
3. Proficiency in CMOS/BCD MOS processes and device structures, as well as layout handling for common package types.
4. Familiarity with common ESD protection device structures, principles, and full-chip latch-up protection methods.

5. Strong written and verbal communication skills in both English and Chinese.

6. Proactive, diligent, and capable of working under pressure; excellent learning, communication, and teamwork skills.

This role welcomes both fresh graduates and experienced engineers.

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Engineer (System Security).

You will be looking after the governance of the infrastructure and systems for mission-critical Command and Control (C2) system that Thales Solutions Asia (TSA) have developed for government agency. You will be part of a team to manage the security of system, to ensure the system adhere to the security policies, and is well protected from any threats, risks or exploits.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Security Engineer, you are accountable for:

Provide security expertise and management services to support Authority in activities such as:

· Internal / external audits (IM8, Cybersecurity, etc)

· Policies compliance (IM8, Cybersecurity, etc), work with vendor on:

- Vulnerability management compliance reports and patch reports

- Filing of documents and Security Scorecard for audit purpose, to produce it as required

- Monthly logs review. E.g., privilege user activities

- Vulnerability/ Compliance Assessments

- Penetration Tests and Source Code Reviews

· Disaster Recovery (DR) and Business Continuity Planning (BCP):

- All relevant activities related to the DR and BCP planning

- Checks on system backup completion by vendor and datacentre

- Document update and implementations.

· ICT/Threat Risk Assessments (TRA)

· Monthly reviews of privileged accounts and non-privileged account, disable inactive accounts

· Seek security waivers (IM8, Cybersecurity Act, Circulars etc)

· Circulate security notifications/alerts to vendors and ensure status updates too all stakeholders including cybersecurity centre

· Security monitoring/tracking:

- Monitor alerts from SOC

- Update stakeholders regarding SOC alerts

- Review compliance reports with vendors to ensure that system is compliant

- Manage, track and update any security incidents/ issues to all stakeholders

- Review Incident Report (if any)

· Patching:

- Ensure patches are tested and verified before seeking approval for patching downtime

- Communicate system downtime to all stakeholders

- Ensure system availability after patching is completed

· Obsolescence management for software licenses, hardware, operating systems and certificates

· Security enhancement/ integration

· Support the submission of security clearance for related vendors

· Perform other related duties as assigned or requested

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Working hours will be 0830 hrs to 1800 hrs (for Monday to Thursday) and 0830 hrs to 1730hrs (for Friday), excluding weekends and Public Holidays

· Outside of working hours, to provide online support via emails and group chats when required based on the priority and severity of issues related to the system

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in cyber security and vulnerability management is preferred

· Strong knowledge of security principles, best practices, and industry standards, such as NIST, ISO 27001, and CIS Critical Security Controls

· Able to understand security posture of systems

· Prior working experience in Project Management is a plus point

· Able to understand the system and software architecture, and user operations environment

· Willingness to pick up any new technologies

Education

Diploma or Bachelor’s Degree in Cybersecurity/ InfoSec/ Information Technology / Information Systems / Business IT or its equivalent

Relevant professional certifications, such as CISSP, CISM, CEH, or other security certifications

Experience

Minimally 1-2 years of experience in cybersecurity and supporting mission critical systems with very stringent SLA e.g. 99.9%

Well-versed in cybersecurity best practices and establishing of its policies

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices

Pre-Sales Solution Engineer

Our Sales team is the driving force behind our company's growth, handling the entire sales cycle from prospecting and business development to expanding our services with existing clients through effective account management. We pride ourselves on our dynamic, fast-paced, and multicultural environment, where ambition and innovation thrive.

What is the role about?

We are now searching for an experienced Pre-Sales Solution Engineer to provide technical knowledge, advice, and support to sales representatives and customers during the sales process to resolve requests regarding products and technical issues and to maximize the benefits derived from the organizations’ products and or services.

Key responsibilities:

• Provides presales technical expertise to the Product teams and customers.
• Provides technical input into projects and technical documents and identifies additional sales opportunities with existing customers.
• Installs and demonstrates the products at customer sites.
• Collaborates with product teams to develop and recommend products and services to meet customer’s requirements.
• Assist customers to identify their technical specifications and determine what documentation is required to incorporate the organization’s products into customer applications.
• Maintains up-to-date and comprehensive knowledge of the organizations and competitor’s products and/or services.
• Writes blogs, white papers, and other technical material to promote the products and technical capability of the company.
• Helps the customer, if needed, in the implementation of the new products and makes sure the defined specifications are in place and helps implementing them.

Who are you?

• 7 - 10 years of Technical Solution experience within IT (mainly Cloud)
• BA/BS degree in Business Administration, Sales, or a relevant field
• Experience in the IT Industry (IaaS)
• Experience in writing blogs, attending events, and making presentations.
• Experience working cross-functionally with internal and external stakeholders.
• Fluency in English and one Asian language (both, verbally and in writing) to liase with stakeholders in the region.
• SAP experience is a plus.

Benefits:

• Competitive salary + AWS + annual bonus scheme
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• 18 days paid time off
• Multi-cultural work environment (our colleagues are from over 60 countries!) in a company where you can truly make a difference

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at life at Leaseweb. For questions, please reach out to Danisha Ardilla, Talent Acquisition Specialist, at: [email protected]

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

As an Infrastructure Support Engineer, you will be responsible for ensuring the smooth operation and support of our IT infrastructure. You will focus on end-user computing, account management, and asset management within our organization. The ideal candidate will have a strong understanding of Microsoft 365 and possess excellent problem-solving and communication skills.

Responsibilities

Microsoft 365 Administration:

• Administer and support Microsoft 365 services, including Exchange Online, SharePoint Online, Teams, and OneDrive.
• Configure, manage, and troubleshoot user accounts, licenses, and permissions within Microsoft 365.
• Assist with deployment and migration projects involving Microsoft 365.

End User Computing Support:

• Provide technical support for end-user devices, including desktops, laptops, and mobile devices.
• Troubleshoot and resolve hardware and software issues related to Windows OS and Office applications.
• Ensure users have the necessary tools and resources for effective productivity

Account Management:

• Manage user accounts within Active Directory and Microsoft 365, including onboarding and offboarding processes.
• Implement security best practices for user accounts, including role-based access controls and password management.

Asset Management:

• Maintain an accurate inventory of IT assets, including hardware, software, and licenses.
• Assist in procurement and deployment of IT assets according to company policies and budget constraints.
• Perform regular audits of IT asset utilization and compliance.

Documentation and Reporting:

• Create and maintain technical documentation for processes, configurations, and troubleshooting procedures.
• Provide regular reports on system performance, asset status, and support activities.

Qualifications

• Bachelor’s degree in Computer Science, Information Technology, or a related field (or equivalent experience).
• Proven experience in IT support, particularly in infrastructure support and end-user computing.
• Strong knowledge of Microsoft 365 services and administration.
• Familiarity with Active Directory and user account management.
• Proficient in hardware and software troubleshooting for various operating systems.
• Experience with asset management tools and methodologies.
• Excellent communication and interpersonal skills.
• Strong problem-solving abilities and a proactive attitude.

In Schneider Electric everything we do promotes progress and sustainability for all — our colleagues, customers, partners, and the communities and societies where we live and work. From the products, software, and services driving the digital transformation of energy management and automation to corporate citizenship and volunteer activities, we make an impact by helping people and organizations become more resilient and efficient, more electric and digital.

Which is where you come in. Working at Schneider Electric means working toward a cleaner, better world. You're part of a global team built on inclusion, mastery, purpose, action, curiosity, and teamwork, turning sustainability ambitions into actions.

We are looking for Service Engineer (PLC) to make an impact!

The Role:

As a Services Engineer, you will work within the Services operations team in Singapore and you will be responsible to support any job assign to you to ensure customer satisfaction with Schneider products and its services.

What will you do?

• Perform field service (customer site service) activities involving the installation supervision, commissioning, maintaining, modification, onsite training, system upgrade and repair of Schneider PLC.
• Responsible for a region or subgroup of field services.
• Performs installation supervision and commissioning of Schneider products including day to day service of the same.
• Performs maintenance for Schneider PLC.
• Trains customers on equipment operation and maintenance of Schneider PLC Product.
• Represents Schneider dealing with customer concerns.
• Responsible for identifying and reporting failure modes encountered when in the field. Also responsible for determining the cause of these failures.
• Solve Site problems at customers site and provides reports on these issues.
• Providing 24hrs telephone support for customers.
• Acquisition of Customer Service products.
• Support internal for spare parts warranty, preparation and assembly.
• Improve on site report and process.

What qualifications will make you successful?

• Min Diploma / Degree in Electrical & Electronics Engineering
• Min 3-5 yrs exp. in Oil & Gas sector, Power Generation, Petrochemical technical experience is an added advantage.
• Has experience and skilled in PLC. Technical knowledge of MV and LV equipment will be an added advantage.
• Willing to travel up to 80% within Region.
• Has teamwork and is customer oriented.
• Has good time management and able to work under pressure.
• Excellent verbal and written communication skills in English are essential.
• Ability to interface with all functional areas of the company.
• Skilled in Microsoft Office – Excel, Word and Power Point.

What’s in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee and dependents
• Worldwide Employee Stock Ownership
• …and more!

Let us learn about you! Apply today.

You must submit an online application to be considered for any position with us. This position will be posted until filled.

ROLE DESCRIPTION SUMMARY

In anticipation of future bids and projects in Defence and Public Security sectors, Engineering Department requires system engineers who has a track record of building, deploying and maintaining the IT infrastructure in an enterprise environment. Domain knowledge in enterprise data networks and/or cybersecurity is desirable.

The System Engineer is to assist with IT infrastructure solutions according to project requirements and drive transformation for internal/external customers by adopting established platforms. The candidate will be involved with the requirements gathering, preparation of proposals, and conduct of presentations to customers or system owners. Upon confirmation of projects, the candidate is expected to take on an active role in the definition, procurement, deployment and operations of the necessary IT infrastructure covering but not limited to server hardware, virtualisation middleware, operating system and backup solution etc. Where necessary, the candidate may be tasked to support data networking initiatives, cybersecurity implementations and other COTS deployment depending on the candidate’s technical background and interests. Therefore, a good understanding of cybersecurity principles and concepts such as network segmentation, network access controls and 802.1X is desirable.

KEY ACTIVITIES AND RESPONSIBILITIES

As an IT Infrastructure System Engineer, you are accountable for:

· Assist project or team leads in evaluating and recommending the appropriate IT infrastructure products (commercial or open source) that will meet project or customer requirements

· Take charge or support the deployment of said products, including integration and testing activities at the System-as-a-whole level

· Work with engineers from other disciplines (e.g. software, cybersecurity, integration) in the delivery of turn-key systems or proof-of-concept (POC) initiatives

· Monitor the health of infrastructure services and perform availability management for servers and its services, and assist in the resolution of operational issues

· Create & maintain technical documentation on Operations / Audit Best Practices, troubleshooting & related solutions knowledge base

· Manage the system recovery process (backup/restore of Infrastructure services and critical production server data and image) and assist in preparing incident reports in the event of outages

· Participate in failover or disaster recovery exercises of the IT infrastructure when required

· Deploy security fixes on Infrastructure services in accordance to enterprise vulnerability and patching strategy

· Administer servers, VMware/Hyper-V platforms and domain controllers/LDAP servers.

· Participate in the optimization of system performance and system capacity planning.

· Support deployment/configuration tasks of Cisco switches and network firewalls (Check Point / Fortinet / Palo Alto)

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Degree in Computer Science, Information Technology or related disciplines

· At least five years of relevant IT experience in designing (not mandatory but preferred), deploying and managing IT infrastructure systems.

· Required knowledge and experience with Windows Server 2k16/2k19, Linux, VMware/Hyper-V virtualization, and Azure Cloud

· Knowledge of infrastructure best practices, system technologies, operation processes and system engineering methodologies

· Working knowledge of cybersecurity technologies will be desirable

· Technical certification in cybersecurity, network or system technologies, such as CCNP, Microsoft Certified: Azure Administrator Associate, VCP (VMware), VMCE (Veeam), OSCP, SSCP etc. will be advantageous.

· Good written and oral communication skills

· Motivated team player with a keen eye for details, but able to work independently as well when required

· Candidate should also be willing to explore new technical domains in order to have a holistic technical view of the digital transformation landscape

Summary:

Being a new entrant in Singapore's R&D landscape, Skywork AI Singapore is dedicated to pushing the boundaries of Artificial General Intelligence (AGI) through foundational research, with a particular focus on Foundation Model 2.0 and Agents. Foundation Model 2.0 encompasses various dimensions, including pioneering new foundation models and applications, optimizing training and inference acceleration, and conducting theoretical studies to enhance interpretability. The work on Agents delives into both virtual and physical agents, propelling us into the forefront of AGI development.

Skywork AI Singapore is partnering with universities in Singapore, to invite motivated candidates to enroll in a PhD program and work at Skywork AI Singapore. Successful candidates will become full-time employees of Skywork AI and should qualify to be admitted into the PhD Programme at one of the universities in Singapore.

Candidate's Expectation:

• Work with our research scientists to conduct groundbreaking research in the AGI field, focusing on Foundation Model 2.0 and Agents
• Collaborate closely with our interdisciplinary team to publish influential research findings in top-tiered conferences and journals, making a significant impact on the AGI community
• Embrace the entrepreneurial spirit and actively explore technology transfer opportunities into business products

Desirable Experience:

• Demontrate a strong interest in a career in computer science
• Keen to study and perform research in areas such as Artificial Intelligence, Computer Vision, Deep Learning, Game AI, Natural Language Processing, Reinforcement Learning, and Speech Recognition. (Preferably but not limited to)
• Proficiency in differentiable programming frameworks such as PyTorch, TensorFlow, and JAX
• Possessed Bachelor's or Master's Degree in Computer Science/Engineering, Statistics, Mathematics, Data science, or related fields is highly desirable
• Not a recipient of, or hold any other scholarship or other award of a monetary nature (Excluding bursary and financial aid);
• Must meet the postgraduate admission and academic requirements
• For existing PhD candidates, must be 2 years or less into the postgraduate program

IPP trainees will be able to enjoy the following benefits:

• A Monthly salary of SGD6,000, in addition to CPF (for citizens and PRs), Medical Insurance, and many employment perks
• Sponsorship of tuition fee for 4 years
• Conference and travel allowances
• Computing equipment and GPU resources

Apply:

Interested candidates may send the latest Curriculum Vitae, transcripts, motivation letter and publication list to [email protected] to explore this exciting opportunity. Kindly indicate in your motivation letter, the University and intake that you have applied to e.g. NUS August 2025 intake.

We are committed to fostering diversity and welcome candidates from all backgrounds to apply. Join us in shaping the future of AGI at Kunlun-2050 Research Lab.

Job Position:- Resident Engineer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Civil or Structural Engineering or equivalent.
• Registered as Resident Engineer with BCA/IES/ACES.
• 3 to 10 years of relevant site supervision experience as a resident engineer.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:

• Architect and lead the development of high-performance, distributed backend systems.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure system reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in backend development, with experience in leading large-scale projects.
• Mastery of programming languages and frameworks (e.g., Go, Python, Java, Node.js, Spring, Django).
• Extensive experience with distributed systems, caching mechanisms, and messaging queues.
• Advanced knowledge of DevOps practices and CI/CD pipelines.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job Description:

• Architect and lead the development of high-performance, user-centric frontend systems.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure frontend reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in frontend development, with experience in leading large-scale projects.
• Mastery of modern frontend frameworks and libraries (e.g., React, Angular, Vue.js).
• Extensive experience with frontend optimization techniques and performance profiling tools.
• Advanced knowledge of web accessibility standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job Description:

• Lead the design and development of complex, scalable iOS applications.
• Mentor junior engineers and contribute to team growth.
• Collaborate with cross-functional teams to gather requirements and deliver solutions.
• Optimize application performance and ensure high-quality user experiences.
• Implement security best practices to safeguard user data.
• Drive continuous improvement in development processes and tools.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 3-7 years of experience in iOS development, with a proven track record of delivering complex applications.
• Expertise in Swift and Objective-C for iOS development.
• In-depth knowledge of iOS architecture components and MVVM/MVP patterns.
• Familiarity with tools like Xcode, CocoaPods, and Fastlane.
• Excellent communication and leadership skills.

As a global leader in power and thermal management solutions, Delta Electronics was founded in 1971 and is headquartered in Taipei, Taiwan with annual revenue exceeding $13 billion. Our wide range of products and solutions cover power supplies, energy management systems, display solutions, and industrial automation products.

We are known for our focus on innovation, sustainability, and energy efficiency. Active investment in research & development, and implementation of cutting-edge technologies ensures our business drives positive environmental impact.

Looking forward to having you join our 85,000 colleagues in building a Smarter and Greener future, Together!

Position Overview:

As a Datacenter Infrastructure Field Application Engineer or Presales Engineer, you will be responsible for supporting and driving the sales of solutions within the datacenter infrastructure field. In this role, you will work closely with customers, sales teams, and other technical personnel to ensure the successful deployment and integration of CDU/Cooling systems in datacenter environments.

Key Responsibilities:

• Expertise in CDU/Cooling Solutions: Possess in-depth knowledge of Data Center products, solutions, and services, keeping up-to-date with industry trends and technological advancements related to datacenter infrastructure.
• Sales Support: Collaborate with the sales team to participate in customer meetings and presentations, understanding customer needs, and proposing appropriate solutions.
• Technical Consultation: Engage in technical discussions with customers to understand their datacenter infrastructure requirements and propose tailored solutions.
• Solution Design and Proposal: Create detailed technical proposals and designs that address customer requirements, including system configurations, power distribution, backup options, and monitoring capabilities.
• Project Management: Collaborate with project managers, engineers, and installation teams to ensure the successful implementation and commissioning of systems in datacenter environments. Provide technical guidance and coordinate tasks throughout the project lifecycle.
• Demonstration and Training: Conduct technical demonstrations and training sessions for customers and sales teams to showcase the capabilities and benefits of solutions.
• Customer Relationship Management: Build and maintain strong relationships with customers, addressing their technical queries, providing post-sales support, and proactively identifying opportunities for additional solutions and services.
• Industry Expertise: Stay updated with the latest industry standards, regulations, and best practices related to datacenter infrastructure, power distribution, and systems.

Qualifications:

• Education: Bachelor's degree in Mechanical Engineering, Computer Science, or a related technical field is preferred.
• Experience: Prior experience as a Field Application Engineer, Presales Engineer, or a similar role within the datacenter infrastructure industry, with a focus on CDU/Cooling solutions and power management. Experience in supporting sales teams and customers is highly desirable.
• Communication Skills: Excellent verbal and written communication skills to effectively convey technical concepts and solutions to customers and internal stakeholders. Ability to deliver compelling presentations and demonstrations.
• Problem-solving Skills: Strong analytical and problem-solving abilities to identify customer requirements, propose effective solutions, and troubleshoot technical issues.
• Project Management: Familiarity with project management methodologies and tools to manage multiple projects simultaneously, ensuring timely delivery and customer satisfaction.
• Customer Focus: Demonstrated ability to understand customer needs and offer suitable solutions. Strong customer service orientation and ability to foster long-term customer relationships.

My client is a leading consulting company in the Lifesciences industry and works with big pharma players in the market for different engineering projects. Being in the consultancy business for over 10 years, one of the area they truly invest in is training and growing your career development.

My client believes in digital transformation and will be looking to hire talents with the following diciplines

Computer System Validation CSV Engineer

- Perform risk assessment and validation on CSV systems

- Execute validation protocols (IQ, OQ, PQ) and prepare detailed documentation

Laboratory Instruments/ Equipment Engineer

- Execute qualification protocols for lab equipments (HPLC, GC)

- Troubleshoot and resolve issues with lab equipments

CQV (Commissioning, Qualification and Validation)

- Manage and optimise HVAC systems, utilities and overall facilities infrastructure

- Oversee any facility upgrades and maintenance schedules

To be successful you should have

- Degree in Engineering/ Lifesciences or a related discipline

- Proven experience of at least 2 years in this filed

- Familiar with industry standards, regulations such as GxP, ISO, FDA, EMA)

Interested applicants, please send your profile to [email protected]

Gina Yeo

Life Sciences Consultant/ Head

CEI: R1660520 | Licence No: 19C9622 |

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Responsibilities:

• Solutions delivered on time and on budget.
• Perform maintenance on time.
• Provide timely and satisfactory issues resolutions.
• Conduct training, presentation to internal and external customers.
• Manage internal and external customers.

During System Implementation Phase:

• At site survey to ensure infra and network is in accordance to solutions requirements.
• Install, Configure solutions at sites.
• Manage User Acceptance testing at sites.
• Conduct User training at sites.
• Document handover items for customers at sites.

During Maintenance Phase:

• Ensure all delivered solutions are in operation.
• At site or remote to support and troubleshoot issues related to the delivered solutions.
• At site to perform solutions preventative action, monthly patching or upgrade.
• At site testing and delivery of Samsung devices.
• Work closely with the HQ Technical Support & R&D for critical issues escalation and VOC compilation.

Requirement:

• Diploma or Degree in Computer Science or Information System related fields
• Server and/or cloud certificate is highly preferred.
• At least 2 years of experience in network administration, QA testing, software installation and maintenance.
• Knowledge in the use of VM software and system OS (Windows Server, JAVA, Apache Tomcat, Redhat, Ubuntu, etc.).
• Knowledge in the configuration management such as AD, CA, DNS etc.
• Knowledge in the use of database: MSSQL, MYSQL etc.
• Knowledge on Cloud (i.e., AWS, Azure, or similar) and on-premises infrastructure deployment.
• Excellent problem solving, and analytical thinking.
• Good at documentation (specification, user guide creation)
• Excellent communication skills; able to present technical topics to non technical audience.
• Subject to government G50 clearance (compulsory)

Preferred Qualification:

• Knowledge in MDM related solutions and technology (such as Samsung Knox, Android Enterprise, VMWare Workspace ONE, MobileIron, Citrix Endpoint Management, Microsoft Intune, and etc) are a plus.
• Programing and software development skill in Java, XML, HTML, Android development are a plus.
• Project Management experience and/or certificate.
• Experience in designing cloud system environment, able to manage cloud resource with automation.
• Ability to take up a new technology and perform development based on client requirements.

Senior Data Engineer

Institution: National Healthcare Group
Family Group: Administration

The Senior Data Engineer leads the creation, maintenance, and strategic development of our advanced data analytics infrastructure, which is vital to the hospital's data-driven decision-making processes. This role oversees the acquisition, storage, retrieval, and optimization of data from various sources to support clinical, operational, and research initiatives. The position directly supports the work of the Group Chief Data Officer (GCDO) for Data Analytics and provides leadership to the data engineering team.

Leadership and Management:

• Lead and mentor a team of data engineers, fostering their professional growth and ensuring high-quality deliverables.

• Develop and implement best practices, standards, and architectural decisions for data engineering processes.

• Collaborate with cross-functional leadership to align data engineering strategies with organizational goals.

• Drive innovation in data engineering practices and technologies within the organization.

Strategic Planning and Execution:

• Develop and execute the long-term vision for the data engineering function, aligning with the institution's overall data strategy.

• Identify opportunities for process improvements and automation to enhance team efficiency and data quality.

• Manage resource allocation and capacity planning for data engineering projects.

Data Sourcing and Collection:

• Oversee the identification and evaluation of source systems.

• Guide the team in gathering requirements on frequency, volume, and types of data.

• Ensure robust data privacy and compliance measures are in place, liaising with legal and compliance teams as necessary.

Data Ingestion and Architecture:

• Lead the design and implementation of scalable, efficient data ingestion pipelines using Informatica IDMC, Spark, and Python.

• Establish architectural standards for reliability and fault tolerance of ingestion pipelines.

• Oversee data transformation strategies during ingestion.

• Manage vendor relationships and collaborations for data ingestion projects.

Data Lake Management and Integration:

• Direct the structuring of data in the DataBricks Lakehouse to ensure optimal usability and performance.

• Oversee data partitioning, indexing, and archival strategies.

• Lead integration efforts with DataBricks Lakehouse, ensuring seamless accessibility for data scientists and analysts.

Data Quality, Validation, and Security:

• Establish comprehensive data quality frameworks and validation protocols.

• Implement and oversee security measures, including access controls, data encryption, and regular audits.

• Collaborate with compliance officers to ensure adherence to healthcare data regulations.

Performance Management and Optimization:

• Set and monitor KPIs for data ingestion pipeline performance.

• Lead optimization efforts to meet and exceed SLAs.

• Conduct regular performance reviews and implement improvement strategies.

Strategic Collaboration and Communication:

• Serve as the primary liaison between the data engineering team and other departments, including data science, business analytics, and IT.

• Present data engineering strategies, progress, and challenges to senior management.

• Foster a culture of knowledge sharing and continuous learning within the team.

Qualifications:

• 8+ years of experience in data engineering, with at least 3 years in a leadership role.

• Strong technical expertise in data engineering tools and technologies, including Informatica IDMC, Spark, Python, and DataBricks.

• Excellent communication and interpersonal skills, with the ability to influence and collaborate across all levels of the organization.

Nice to Have:

• Proven track record of successfully leading data engineering projects in a healthcare setting.

• Advanced knowledge of healthcare data standards, privacy regulations, and compliance requirements

Hitachi Asia Ltd., a subsidiary of Hitachi, Ltd., serves as the regional headquarters for seven countries across Southeast Asia (Indonesia, Malaysia, Myanmar, Philippines, Singapore, Thailand, and Vietnam). We are constantly increasing our presence through our forays in information & telecommunication systems, power systems, social infrastructure & industrial systems, electronic systems and equipment, construction machinery, high functional materials and components, automotive systems, and home appliances, among many more.

Position Overview:

We are seeking a highly motivated and skilled IT Infrastructure Engineer to join our team. The successful candidate will play a critical role in system implementation, ongoing maintenance, and support of existing systems, as well as providing proposals for new projects. This role will primarily serve a key customer, a prominent Japanese bank in Singapore.

Job Duties:

• System Implementation: Lead end-to-end system implementation projects, including planning, design, setup, testing, and system release.
• System Maintenance & Support: Provide troubleshooting and issue resolution for existing systems to ensure smooth operations.
• Project Proposal & Requirements Gathering: Collaborate with clients to understand requirements, evaluate solutions, and prepare detailed project proposals.

Key Qualifications:

• Education: Bachelor’s degree in computer science, IT Engineering, or a related field.
• Experience: - 8+ years in IT projects, particularly within banking or financial institutions. - 5+ years of hands-on experience in system infrastructure implementation. - 3+ years of experience working with major banks in Japan is highly preferred.
• Technical Expertise: Strong knowledge of system infrastructure, including Windows OS, Oracle Database, VMware, and other system operation products. Familiarity with JP1 or similar enterprise-level system operation tools. Proficient in programming and scripting languages (e.g., WinBatch, PowerShell).
• Language Proficiency: Advanced skills in listening, reading, writing, and speaking in both English and Japanese language to effectively communicate with clients and teams.
• Customer-Focused: Strong customer service orientation, with the ability to understand and address client needs effectively.
• Additional Skills: Ability to diagnose and resolve software-related issues in collaboration with product support teams. Strong communication and negotiation skills, with experience in working cross-functionally with internal and external IT teams.

You will be at the core team of Delta Research Center leading disruptive technological advancement with strong business value that empower company’s new business in intelligence machines, robotics and automation. As a research engineer, you will collaborate with technical experts to develop state-of-the-art mobile robot products / solution. You will play a key role in continuously improving existing and new products /technology, as well as be part of a dynamic and growing ecosystem in this field. You will manage and execute research programs and projects – particularly in the domain of robotic manipulation that develop and deliver impactful research and business outcomes.

Responsibilities:

• Work within a cross-functional team of robotics scientists and engineers to develop next- generation autonomous mobile robots (AMR)
• Design system architecture, design and write software for robotic systems, sub-systems or modules in a continuous integration and continuous deployment (CI/CD) environment
• AMR setup, integration, programming and testing using different brands of mobile robots and mobile manipulators, including proprietary robots
• Providing hands-on on-site support for software development, integration, testing and troubleshooting of AMR platforms
• Translate new technology and research outputs into modular and re-useable software packages
• Design of experiments to benchmark system performance by adopting in-house and/or industrial test methodology
• Adopting latest standards and/or methodology to work (Agile, standards, open source, common platform)

Requirements:

• Degree/Masters in Electronics, Computing, Mechatronics Engineering or equivalent
• 4-6 years relevant experience in robotics software design, development and integration
• Passionate in robotic navigation, sensing/perception and control system design, prototyping and practical problem-solving; with hands-on experience with robotics system / hardware
• Proficient in programming languages such as Python and C++, and/or other languages
• Proficient in robot programming using Robot Operating System (ROS) and Linux environment
• Proficient in software development in as AGILE and collaborative environment using CI/CD tools and able to break down robotic software development into smaller tasks
• Experience in one or more of the following domains will be preferred: Localisation, Mapping, Navigation, Machine Vision, Path Planning, Motion Planning, and/or Mission Planning
• Experience with design and development of mobile robots or mobile manipulator will be a plus
• Must be result-orientated, independent and a self-driven team player