• Experienced in the design of water treatment plants (desalination, potable water, recycle water), wastewater treatment plants (municipal and industrial) and membranes systems (MBR, MF/UF, Reverse Osmosis, Nano-Filtration, etc.)

• Review Client’s Requirement, Technical Specifications & Tender Specifications to generate engineering deliverables (General Specification & Particular Specifications, Datasheets, Major Equipment List, Pipe List, Mass Balance, Hydraulic Profiles, Process Flow Diagram, Process & Instrumentation Diagram, etc.)

• Assist the Engineering Manager on engagement with Clients, Consultants, Sub-Contractors, Vendors, and others for the development of design, procurement, fabrication, construction, erection and commissioning works.

• Coordinate with inter-disciplines engineering team (Process, Mechanical, Electrical, Instrumentation & Control Automation, C&S, Piping & Systems/Skids Engineering and Drafting) on development of engineering deliverable on a timely basis.

• Reviewing and providing input to project schedule and ensure all planned dates and progress are realistic. Provide updates on engineering deliverables per schedules and implement catch-up actions where applicable.

• Procurement Services Support: Develop the applicable Equipment List/Package, Technical Specifications and Bill of Materials to support Procurement Department to issue Request for Quotation (RFQ). Assist to review the RFQ, prepare applicable technical & commercial clarifications with selected Sub-Contractors or Suppliers. Provide justification on the shortlisted Sub-Contractors or Suppliers for onward negotiations.

• Assist the Engineering Manager on the development of FAT, SAT, Pre-Commissioning, Start-up, Commissioning protocol and support the implementation.

• Development of Operational & Maintenance Manual.

• Assist the Engineering Manager to support project management team in project implementation related engineering, troubleshooting and maintenance requirement.

Responsibilities:

• Design, analysis and plan for Civil & Structural engineering works
• Prepare design calculations, drawings and carry out Authority submissions
• Responsible for timely submission of plans and reports to Consultant and Authorities
• To coordinate & liaise with consultant, sub-con and other trades eg M&E and architectural for projects specifications & other technical issues
• To assist in project coordination and oversee of all structural/Civil works on site and ensure all related activities are carried out as per drawings
• Attend meetings inclusive technical meetings (not withstanding to minutes down the meeting if necessary) and site walks during the construction phase of project
• Keep track of test reports, tests, ST, Green Mark scheme and constructability scheme
• Document control and compilation accordance to company ISO standard

Requirements:

• Diploma or Degree in Civil/Structural Engineering / Building
• Min 2 years structural coordinator experience
• Good knowledge of Structural specifications & requirements

Job Description:

Serves customers by identifying their needs and engineering adaptations of products, equipment, and services.

Job Responsibilities:

- Identify and develop new business accounts

- Establish good working relationships with customers and partners

- Follow-up and manage customers enquiries and order shipments

- Recommend suitable products and solutions to the customers

- Provide monthly sales update to the management

- Evaluate new potential products for customer

- Manage with system set up, paperwork, commissioning and ensure that delivered system performance is within specifications

- Attend local or overseas events, conferences and exhibitions

Job Requirements

- Diploma or Degree in Engineering (EEE; Electronic, Mechanics; Biomedical etc.) related discipline

- 2 years of sales experience in optics, laser, spectroscopy, and photonics is preferred.

West Region, Singapore

Sales Representatives/Consultants (Sales)

Full time

$3,500 – $5,000 per month (SGD)

Key Responsibilities:

• Promote and sell hygienic components, such as sanitary tubes, fittings, valves, and seals, to clients within the F&B, pharmaceutical, and semiconductor industries.
• Build and maintain strong relationships with key accounts, ensuring a high level of customer satisfaction.
• Identify and capitalize on new sales opportunities by understanding client requirements for hygienic components.
• Provide clients with detailed information on hygienic products, focusing on their applications within clean and contamination-sensitive environments.
• Meet or exceed sales targets, ensuring consistent growth in the market share of hygienic components.
• Collaborate with internal teams to address customer needs, ensuring timely delivery of products and solutions.
• Keep abreast of industry developments, trends, and regulatory requirements relevant to hygienic components.
• Assist in creating quotations, proposals, and contracts tailored to client specifications.
• Maintain detailed records of sales activities, customer interactions, and feedback.

Qualifications and Skills:

• Proven experience in sales, particularly in selling hygienic components to the F&B, pharmaceutical, or semiconductor sectors, is highly preferred.
• Strong communication, negotiation, and relationship-building skills.
• Bilingual in English and Chinese will be advantageous.
• Customer-oriented approach, with a focus on delivering tailored solutions to meet specific industry needs.
• Driver license with own transport will be advantageous.

Responsibilities

• Develop engineering designs based on project requirements, from conceptual to schematic and detailed designs.
• Carry out structural design analysis and calculations.
• Participate in the tendering processes and monitors the work of contractors and subcontractors.
• Maintain overall records of incoming and outgoing documents, drawing registers, RFI and shop drawings to ISO standard compliance.
• Assist Project Job Captains to resolve design and attend to site queries/ issues
• Review and approve contractor’s shop drawings and material submissions.

Qualifications

• Bachelor degree in Civil and Structural Engineering or equivalent
• 0 – 5 years of relevant working experience in a similar capacity.
• Positive attitude & meticulous, has an eye for details
• Good communication & inter-personal skills, team-player
• Fast learner & ability to multi-task & work independently
• Proficiency in Microsoft Excel, Microsoft Words, Powerpoint.
• English and Chinese proficiency

The Test Engineer will be based in Changi South reporting to NPI Manager.

Responsible for implementing and maintaining cost-effective methods of testing and troubleshooting systems, software, and/or equipment for state-of-the-art semiconductor component manufacturing equipment's.

Job Responsibilities

• Directs and/or coordinate test process flow for system Integration and modular testing of high precisions electromechanical assemblies.
• Directs and/or coordinate test solutions for system Integration and modular testing in collaboration with OEM to meet the product functional performance to achieve zero defects in field.
• Directs and/or coordinates electronic and electromechanical engineering and/or technical personnel in fabrication and design of testing and test control apparatus and equipment, or software and systems testing.
• Directs and coordinates electronic engineering activities concerned with development, procurement, installation and calibration of instruments, equipment and control devices required to test, and record test data.
• Interfaces and confers with engineering and technical personnel to resolve testing problems such as product or system malfunctions, incomplete test data, data interpretation or coding issues.
• Evaluates and interprets test data and prepares technical reports for monitoring and management purposes.
• Resolve test yield problems by performing evaluation of root causes, developing, and coordinating corrective action measures and monitoring improvements.
• Trains and instructs floor support, test technicians and test operators on test hardware and/or software, as well as problem solving techniques.
• Perform and support equipment verification and integration in production.
• May develop or use computer software and hardware to conduct tests on electronic products and systems or software.
• Create and maintain process documentation.
• Actively search for innovative technologies or procedures in the test sector.
• Defines conditions under which tests are to be conducted and sequences and phases of test operations.

Job Requirements

• Bachelor's degree in electrical and electronics or Mechatronics field or equivalent experience and training which requires at least 4 years of experience in test engineering in the high technology electronics industry or related area.
• Modular/ System Integration Testing: Product functional testing and troubleshooting various test solution at various level component, modular and final system
• Experience in functional software, measuring equipment’s (Oscilloscope, logic analyzer, sensors, measuring gauges etc.) and tools that are integrated to perform the functional test to cover the product functionality
• Experience on modify or updating existing software solutions to support product design changes or test enhancements
• Experience in creating and maintaining stand operating procedures to enable easy of manufacturing and meeting all audit compliance.
• Inspection: PCBA board, systems, components, cable and harness, microscope, measuring tools.
• Handling Mechanical & Electrical Tools: taps and dies, alignment tools, measuring tools.
• Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
• Ability to write reports, business correspondence and procedure manuals.
• Ability to effectively communicate with managers and employees of the organizations.
• Impacts the near-term (quarterly/semi-annual)operational success of the function. Enhances and provides input to functional processes or technologies. Assists in achieving section/sub-function objectives for a functional area. Demonstrates capability in leading a major initiative that may impact multiple sites/customers.

The Industrial Engineer will be based in Changi South reporting to NPI Manager.

Job Responsibilities

• Analyze production processes, schedules, and workflows to optimize efficiency.
• Develop and implement process improvements to enhance productivity.
• Conduct time and motion studies to identify areas for improvement.
• Design efficient systems integrating workers, machines, materials, and information.
• Establish quality control procedures to ensure product standards are met.
• Manage inventory control and warehouse operations.
• Develop safety procedures to ensure safe working environments.
• Use computer-aided design (CAD) software to create efficient layouts.
• Collaborate with management and staff to implement solutions.
• Monitor operational performance and sustain improvements.
• Use simulation software to simulate new line setup or upsize or downsize of capacity.

Job Requirements

• Typically requires a Bachelor’s degree Industrial Engineering or equivalent experience in addition to 5 years of experience in a manufacturing or related Industry.
• Experience with Lean Manufacturing and Six Sigma methodologies.
• Experience in setting up factory or area for Cleanroom requirements
• Proficiency in CAD and simulation software
• Strong project management skills
• Excellent problem-solving abilities
• Effective communication and teamwork skills
• Understanding of ergonomic principles
• Capability to manage multiple projects concurrently
• Proficiency with statistical analysis tools
• Experience with production planning and control
• Ability to work independently and as part of a team
• Experience and Knowledge of operating bulky and heavy product : 5Mx7M and 10-15 tons weight

Responsibilities:

• Carry out structural design and analysis to meet project requirement.
• Prepare design calculations & shop drawings for submission.
• Provide general technical support to the in-house operations team.
• Technical marketing of structural strengthening products.
• Attend meetings with clients for pre and post contract to meet project requirement.
• Accountable for effective co-ordination of projects as assigned.
• Ensure all safety and quality assurance procedures and standards are followed.

Requirements:

• Must possess at least a good Degree in Engineering (Civil) recognised by the Ministry of Manpower, Singapore and is familiar with the British American Design Standards, and Eurocodes.
• Able to perform structural analysis using design software such as STAADPro ETABS, Prokon etc.
• Familiar with AutoCAD application.
• Good command of spoken and written English.
• Possess initiative, analytical thinking abilities and able to work both independently and as a team.
• Possess positive attitude and interpersonal relationship skills.
• Foreigners: Minimum of two years' experience in local consultancy firms will be an advantage.

SOFTWARE ENGINEER

Job Responsibilities:

• Develop the control system/software for the projects assigned. Primary programming environment is C#, .NET and SQL.
• Perform on-site support, service, and installation of the equipment. Debug and test until final acceptance by customers. Willing to spend extended periods of time on-site during equipment installation.
• Generate and maintain design/test documentation.
• Improve and contribute to software application design, development and end-user’s experience.
• Analyze current programs including performance, diagnosis and troubleshooting of problem programs, and designing solutions to problematic programming.
• Study and research on schematic for build-to-print project.
• Understand the software requirements specification and deliver quality software fulfilled specification.
• Assist to maintain existing software/firmware application as well as create new function/feature.
• Be a team player and assist team members to complete assigned tasks and projects.
• Ensure project delivery and meet project timeline.

Job Requirements:

• Degree in Computer Science/Information Technology/Mechatronics Engineering/Electrical/Electronic Engineering or equivalent.
• Experienced or keen to learn equipment control system/machine automation programming.
• Working knowledge in SEMI GEM Secs is an added advantage.
• Programming experience of PLC, GUI device and Motion Controllers is a plus.
• Computer literate, pleasant personality and able to work independently

Proposal

• Responsible on project tender and proposal
• Assist and follow up on pre and post tender clarification
• Preparation of tender submission documents and compile of proposal
• Adhere to proposal submission by deadline
• Prepare the proposal for management approval
• Assist in paper work and follow up with affiliates if necessary

Requirements

• Bachelor Degree in Business Management or other related discipline
• At least 1 year experience in project proposal or sales coordinator
• Prior experience in petrochemicals and offshore field is preferred
• Keen eye for exploring business opportunities
• Driven, passionate about sales
• Strong sales acumen
• Good in establishing rapport with all levels of people
• Able to work in fast-paced environment and meet tight schedules

Jiangsu Miracle Logistics System Engineering Co., Ltd. is located in Wuxi, a famous city in regions south of the Yangtze River. Founded in 1984 and listed on the Shenzhen Stock Exchange in June 2004, it is the earliest listed company in the industry in China. Its technology and sales rank first in the industry in China.

Currently, we need to recruit college students majoring in chemical engineering, lithium batteries, materials, and energy, battery remanfacture.

Responsibilities:

• The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

• This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Summary

The role involves offering overarching guidance to ensure the successful completion of a project while maintaining adherence to the quality standards established by the company. Responsibilities include, but are not limited to, identifying critical aspects of project execution and proactively addressing potential issues before they arise. Additionally, the position requires the verification and management of man-hour consumption across various disciplines throughout the project's duration.

Duties & Responsibilities

• Involvement in projects with budgets that start at $3 million and can exceed $20 million.

• Assist Senior Project Engineer to oversee the planning, scheduling, execution, and coordination of the technical aspects of projects.

• Facilitate collaboration between various disciplines, including procurement and construction teams.

• Coordinate cost estimation for Engineering, Procurement, and Construction (EPC) activities.

• Maintain regular communication with assigned project clients to facilitate their engagement throughout the implementation process.

• Participate in client meetings to address and resolve project-related issues effectively.

• Oversee project documentation and manage design changes.

• Ensure the seamless execution of projects in alignment with established strategies and objectives across all phases, including feasibility studies, front-end engineering design (FEED), detailed design, construction, commissioning, start-up, and project handover.

• Guarantee that projects adhere to safety, cost, schedule, and quality standards.

• Conduct comprehensive contract reviews, risk assessments, and develop contingency plans.

• Organize proposal and project task forces, as well as allocate staff effectively.

• Initiate kick-off meetings with clients and internal teams.

• Prepare and analyse the overall budget cost plan.

• Monitor and evaluate project operations and timelines.

• Act as the company representative in interactions with clients.

• Develop project specifications and establish systems or processes for effective project execution.

Key Requirements

• Bachelor’s degree in mechanical engineering or a related engineering discipline, with minimum of 3 to 5 years of experience

• Comprehensive understanding of various engineering disciplines, including Process Technical knowledge.

Knowledge & Skills

• Proficient in Basic Design and Piping and Instrumentation Diagrams (P&ID).

• Familiarity with project management fundamentals, front-end engineering FEED, and relevant planning and scheduling tools is preferred.

• Demonstrated success in EPC Project Management within the Oil & Gas and Petrochemical sectors.

• A team-oriented individual who excels in collaboration, showcasing strong communication and interpersonal abilities, alongside outstanding presentation, technical, analytical, and troubleshooting skills.

• Highly self-driven, with the capacity to proactively create plans and carry out tasks with professionalism, diligence, and efficiency, while adhering to established company protocols.

• Design electrical systems for construction projects, including power distribution, lighting, and safety systems.
• Prepare detailed electrical drawings, specifications, and technical documents.
• Conduct load calculations and electrical system analysis to ensure efficiency and compliance with codes.
• Collaborate with architects and other engineers to integrate electrical systems into overall project designs.
• Review and approve electrical contractor submittals, shop drawings, and material samples.
• Conduct site inspections to monitor the progress of electrical installations and ensure compliance with specifications and standards.
• Troubleshoot and resolve electrical issues that arise during construction and commissioning phases.
• Ensure that all electrical systems are installed safely, efficiently, and in accordance with local codes and standards.
• Prepare progress reports and documentation for project management and stakeholders.

1. Understanding of protocols like HTTP/HTTPS/FTP/SFTP/AS2 etc
2. Programing experience in Java
3. Familiarity with Linux operating system and commands
4. Capability to troubleshoot integration issues efficiently
5. Handling a broad range of software and other programming tasks to ensure that their systems integrations are functional.
6. Six months contract (extendable)

To assist in the daily production operation, ensuring schedules of customer is met.

Create and develop quality reports based on drawings

Maintain measuring instruments calibration list.

Liaising with customers and suppliers

Fresh graduates are welcome to apply

Willing to learn and explore

Friendly environment

Engineering graduates prefer but open to others Diploma/ITE also

Versatile to different roles in the company

Position Overview:

In this role, you will be responsible for developing cutting-edge deep learning-based perception algorithms and advancing the state-of-the-art in computer vision. Your expertise in algorithm development and optimization will contribute to our mission of delivering innovative solutions in the field of AI perception.

Responsibilities:

• Design and implement advanced algorithms for various vision tasks, including object detection, lane detection, segmentation, and depth estimation. Enhance the accuracy and robustness of our perception systems.
• Continuously explore the latest advancements in computer vision literature. Bring innovative ideas to the team and contribute to the evolution of our perception algorithms.
• Contribute to our intellectual property portfolio by publishing patents and research papers. Share findings and insights with the scientific community to establish our leadership in AI perception.

Qualification/ Requirements:

• Bachelor's or Master's in Computer Science, Machine Learning, Electrical Engineering, or a related field.
• Research and development experience in one or more of the following areas:

- Strong programming skills with C/C++, with demonstrated delivery of robust, well-tested C++ software

- Experience in deploying AI models on a real-time system

- Strong written and verbal communication skills, to collaborate with stakeholders of various backgrounds

- Object detection and tracking.

- Strong analytical abilities to quickly grasp concepts and design solutions

- Multi-view geometry and 3D computer vision.

Responsibilities:

• Liaise and work closely with the consultant, clients and subcontractors on the progress of M&E work to meet the project schedule.
• To supervise and ensure works are in accordance to the contract drawings and specifications
• Prepare correspondence reports, suggesting corrective actions or value added recommendations according to best practice when applicable,
• Responsible for keeping daily work record, including additional work claim to the clients and from the subcontracts.
• Other ad-hoc duties when assigned

Requirements:

• Min Diploma / Degree in Mechanical Engineering with ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection background.
• Min 3 years working experienced and equipped with knowledge in M&E Services (Especially Machanical, ACMV, Electrical, Plumbing/Sanitary Services, Fire Protection) in the related field is required for this position.
• Knowledge of BIM or AutoCAD added Advantage
• Be able to work independently with minimum guidance and under pressure to meet tight deadlines.

Role Description

As an Automation Engineer, you will be responsible to provide engineering subject matter expertise support to the manufacturing plants, utilities and site facilities operation to ensure consistent product supply and deliver production target. You will be entrusted with the responsibility to ensure maximum plant capabilities through continuous improvement so that equipment and facilities will be optimized in accordance to Good Manufacturing Practice, Good Engineering Practice and in compliance with regulatory requirements as well as EHSS requirements.

Responsibilities

• Lead operational plant troubleshooting efforts and investigation of production process, equipment, systems and code/configuration
• Provides support for the development of new product launch, new capabilities and optimization operational project initiatives to facilitate technical transfer of new program into manufacturing and provide the automation solution
• Provides technical support for new equipment/process start-ups and operation
• Provide operational support to the GMP processes including some off-hours on-call support
• Perform Root Cause Analysis, develop corrective and preventive actions and develop technical solutions to prevent recurrence
• Make changes to manufacturing process control under strict GMP change control management process to optimize processes and maintain compliance
• Responsible for the execution of all design, build and run activities
• Ensure robust testing of new configuration features based on structure risk assessments
• Work closely with stakeholder to ensure production supply
• Collaborate with cross functional team to resolve incidents, events or deviations
• Update or develop standard operating procedures, work instructions, functional / design specifications associated with automation process control.
• Promote Safety, Quality and Compliance culture and continuous improvement mindset that lead to plant safety, quality and compliance to regulatory requirement
• Support engineering process performance management, audit and inspection
• Provide training to plant personnel on automation control process
• Support Service Owner and System Owner roles for DeltaV within the company

Interested candidates may apply through the application system. We regret to inform only Shortlisted candidates will be notified.

EA License No. 01C4394 • RCB No. 200007268E •Derrick Tiew Yong Han EA Registration No. R1877971

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Develop and maintain software applications using C, C++, and Unix/Linux-based environments.

Write efficient, scalable, and well-documented code to optimize system performance.

Troubleshoot, debug, and resolve complex system and application issues.

Collaborate with cross-functional teams to design and implement new features.

Utilize shell scripting and other Unix utilities for automation and system management.

Responsibilities:-

• Conduct QAQC daily checks
• Prepare monthly QAQC report for submission to Corporate QAQC Department
• Conducting monthly QAQC Training to Sub-contractors
• Issuance of QAQC Non-compliance to sub-contractors
• Attend monthly QAQC presentation and meeting at Corporate QAQC Department

Job Requirements:

• Architectural-trained or Structural-trained work experience
• Min 3 years experience

Scope of work requested for the services is to provide system support (level 1/2) to manage Government agency servers. It includes the following:

1. Incident Management

a. Monitoring new incidents

b. Working on incidents assigned

c. Troubleshoot and resolve system issues

d. Timely follow-up and closure of incidents

e. Updating and resolving incidents status in ITSM system

2. Service Request Fulfilment

a. Monitoring of new service request (SR)

b. Work on SR assigned

c. Setup and configure new systems

d. Hardening of OS and applications

e. Timely follow-up and closure of SR

f. Updating SR status in ITSM System and closure of SR

g. Updating Asset Management team on asset issued / returned

3. Monthly Patching

a. Patching of systems

b. Testing upon completion of patching

4. 24 x 7 standby support

a. 24 x 7 standby support and to go onsite as and when required

5. Daily health check / Escort vendor

a. Daily health check and submission of daily health check report

b. Escort vendor when request are raised

6. Other tasks

a. Conduct any other tasks as required of a system engineer role

6 PERSONNEL REQUIREMENTS

6.1 The Contractor’s support personnel managing the servers must be trained and minimally be proficient in the following areas:

Windows Server

(a) The System Engineer shall minimally possess the following requirement:

(i) At least three (3) years of experience in Microsoft Server administration;

and

(ii) Microsoft Certified Solutions Associate (MCSA);

Details of working hours

Monday to Thursday - 8.30am to 6pm

Friday - 8.30am to 6.00pm

ABOUT Defense and Security Engineering Team

Established in Singapore in 1973, Thales Singapore Engineering Team leads and pioneers innovative solutions for the Asia-Pacific region. Our coverage spans across an extensive spectrum of fields, encompassing proven solutions in Defence & Military, Security & Surveillance, Intelligence & Big Data, Secure Radio Communications, to Cybersecurity, Network & Infrastructure Security.

We are at the forefront of cutting-edge technology with a rich legacy in excellence and innovations. With the combined expertise of 2100 staff in Singapore, and over 80,000 professionals across 68 countries, Thales Singapore Engineering Team is the key contributor in keeping Asia-Pacific & the world safe and secure, protecting and changing lives every single step we take.

Along with other departments in Singapore, such as Thales Research & Technology, we engineer state-of-art technological solutions from dreams into reality for the world. If you are ready to make a difference on a global scale, our team is the place for you. Join us today and embark on an extraordinary journey of writing the next chapter of history for a better world.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Software Engineer, you are accountable for:

• Be part of the Security Development team to build innovative Security solutions for Homeland Security, Smart Cities and Critical Infrastructures.
• Be responsible for the technical/solution designs, code development, and component test execution to demonstrate alignment to the product/functional specification of the solution.
• Develop and demonstrate a broad set of technology skills in web application technologies, micro service design patterns, Open Source libraries and frameworks, and technology architecture concepts.
• Collaborate with product/solution architects to create, implement and maintain the product/solution development roadmap.
• Be the main contact point to represent the team, join agile ceremonies and communicate effectively with other development teams and product management team.
• Ensure all work adheres to Thales software development methodologies and processes
• Thoroughly document design to ensure the usability, supportability and maintainability of the developed
• Perform sub-system installation, configuration and integration to support Proof-Of-Concept (POC)/demo.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Experience required:

• 3+ years of hands-on experience of full web application development lifecycle of scalable micro-services-based architectures; including tools, best practices, continuous deployment, dependency/complexity management, scale/performance tuning, monitoring, resiliency, etc.
• Experience in SCRUM/Agile software development methodologies
• Strong knowledge of architectural styles and design patterns is good-to-have

Programming languages/frameworks/Technologies:

• Proficiency in Go Language, various Go frameworks and tools
• Proficiency in building responsive layouts with CSS and HTML5
• Proficiency in building complex Angular applications with Typescript
• Experience with Android (Kotlin)
• Familiar with database technologies such as Postgresql and ClickHouse
• Familiar with MQ and Apache Kafka
• Unit-test code for robustness, including edge cases, usability, and general reliability
• Strong knowledge in version control using GIT
• Maintain the CI/CD pipeline and familiar with Kubernetes. Knowledge about Ansible is good-to-have.
• Knowledge about Mapbox SDK (Android or iOS) is good-to-have.

Behaviour:

• Good communication skills and team-works

Analytical and problem-solving skills

Job Description:

A Singapore based precision optical company is looking for dedicated sales engineer who is fast learner, enthusiastic in sales and customer services

Job Responsibilities:

- Identify and develop new business accounts

- Establish good working relationships with customers and partners

- Follow-up and manage customers enquiries and order shipments

- Recommend suitable products and solutions to the customers

- Provide monthly sales update to the management

- Evaluate new potential products for customer

- Manage with system set up, paperwork, commissioning and ensure that delivered system performance is within specifications

- Attend local or overseas events, conferences and exhibitions

Job Requirements

- Diploma or Degree in Engineering (EEE; Electronic, Mechanics; Biomedical etc.) related discipline

- 2 years of sales experience in optics, laser, spectroscopy, and photonics is preferred.

- Fresh graduates who are keen to explore industrial sales or with engineering background are also welcome to apply

- Be keen on business travelling

- Self-driven and motivated team player

- Good presentation and communication skills with willingness to learn