Production Engineer

• Working hours: 5 Days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong Island (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $6000

Interested applicants can also send your resume to WA:+65 8839 3566 (Ms Angel) and allow our Consultant to match you with our Clients.

No Charges will be incurred by Candidates for any service rendered.

LIEW ONN KEE REG NO : R22108518

THE SUPREME HR ADVISORY EA NO:14C7279

Responsibilities:

• Develop, review, and update all process control documents, procedures and operation condition sheet in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, trouble shooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utilities consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grade, new process and equipment with Production Technology Engineer.
• Optimize plant operating efficiency, yield optimization and energy conservation with feasibility study, make the necessary field test to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measure for customer complaint in technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ finding and recommend modification, improvement and potential investment projects such as debottlenecking, environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked up P&ID’s and the required technical information for cost estimation purpose.
• Coordinate with Technical department all plant improvement and modification activities working closely with Technical Process engineer to prepare detailed engineering design, prepare specification and requisitions for major equipment purchase, review of vendors’ document, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with Technical department for regular update of P&ID’s, instrument list and equipment list.
• Communicate with global EVAL process improvement team to build synergy for further technical updates of KAP EVAL plant.

Minimum Requirements:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in Chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.

Preferred Requirements:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction process, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programming and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

Morgan McKinley is looking for a skilled Machine Learning Engineer - Image Gen for a 12-months contract with our client in the tech industry.

As a Machine Learning Engineer within the ML Platform team, you will play a key role in building our platform for image processing and generation using GenAI. Your focus will be on designing infrastructure that is scalable and extensible to support platform users effectively.

Key Responsibilities:

• Develop the company's Image Generation Platform: Lead the creation of a configurable and scalable image generation platform with functionality similar to tools like ComfyUI. Ensure scalability for parallel processing and the fine-tuning of new models.
• Enable Adoption by the company's Data Science Community: Document the platform and assist users in onboarding to ensure widespread and effective adoption.
• Collaborate with the company's ML Platform Team: Work closely with the team to deploy and integrate the image generation solution into the company's broader ML Platform.

Requirements:

• With 3+ years of experience in Machine Learning Engineering
• Experience with image generation models like Stable Diffusion and Flux. Familiarity with ComfyUI is a plus.
• Proficiency in Python and the ML ecosystem.
• Strong expertise in developing and deploying systems on Kubernetes, with knowledge of GitOps tools like ArgoCD. Experience with Helm and Kustomize is an advantage.
• A solid DevOps background, including Infrastructure as Code (IaC) tools such as Terraform.
• Excellent written and verbal communication skills.

Interested candidates may apply through the application system or send it to [email protected]. Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to Morgan Mckinley Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.morganmckinley.com/sg/privacy-policy. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Morgan McKinley Pte Ltd
Koh Boon Sien
EA Licence No: 11C5502
EA Registration No. R1110345

Morgan McKinley is looking for a skilled Machine Learning Engineer - Ray for a 12-months contract with our client in the tech industry.

As a Machine Learning Engineer within the ML Platform team, you will play a key role in the creation of our new compute layer using Ray. You will help drive the set-up of the infrastructure for Ray on Kubernetes and its integration with the company's existing Data system.

Responsibilities:

• Develop and Deliver High-Quality AI Infrastructure: Collaborate with the Machine Learning Platform team to design and build infrastructure for distributed data processing and model training using Ray. Ensure reproducibility across Kubernetes clusters by leveraging GitOps for cloud infrastructure management.
• Enhance Observability for Ray: Build and integrate monitoring and alerting solutions within observability stack, which includes Datadog, Prometheus, and Grafana. Contribute to the development of runbooks and DevOps documentation.
• Facilitate Ray Adoption Among Data Scientists: Partner with the product team to promote the use of Ray and provide support for users running jobs on Ray clusters.

Qualifications:

• With 3+ years of experience in Machine Learning Engineering and Ray
• Expertise in ML-Ops and Distributed Computing: Strong knowledge of distributed computing frameworks for data processing. Experience with Ray is a plus, though familiarity with frameworks like Dask, Modin, Beam, Horovod, or Deepspeed is also appreciated.
• Proficiency in Python and ML Ecosystems: Solid experience in Python programming and associated machine learning tools.
• Kubernetes and GitOps Expertise: Deep understanding of developing and deploying systems on Kubernetes. Familiarity with GitOps tools like ArgoCD, along with knowledge of Helm and Kustomize, is preferred.
• Strong DevOps Background: Experience with Infrastructure as Code (IaC) tools like Terraform is desirable.

Interested candidates may apply through the application system or send it to [email protected]. Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to Morgan Mckinley Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.morganmckinley.com/sg/privacy-policy. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Morgan McKinley Pte Ltd
Koh Boon Sien
EA Licence No: 11C5502
EA Registration No. R1110345

(2 years contract renewable)

4 days, 12 hrs rotating shift from 7-7; first few months permanent night shift from 8.30pm-6am

Currently the 4 days shift is spread from Monday to Saturday, 2 days off. Sunday is rotating standby.

Salary: $2700 -$3000

Location: Bedok office

Job scope:

• To perform comprehensive maintenance for system
• To perform site supervision and hands on when required..
• To perform troubleshooting and devise resolution when issues or faults arises.
• To communicate/supervise contractors on safety and work related tasks.
• To execute job related tasks assigned by Engineer/Shift Engineer.
• To complete reports for jobs done.

Requirements:

• Diploma in Mechatronics, Electrical or Electronics
• Willing to work at height (6 meters) on outdoor public road on gantries.
• Experience in electrical and electronic works.
• Class 3 driving license is required
• Experience in basic Microsoft office.
• Understand basic Window system.
• Experience in site supervision work.
• Understand in Mechanical/Electrical/Electronic system
• Able to work in 12 hours rotating shift, first few months will be permanent night shifts

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform sales and business development for assigned region.
• Create and implement sales and marketing strategies to achieve sales target.
• Liaise with customers and design engineers to specify the products.
• Continuous search business opportunities and expand market share.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of sales experience with good connections in Petrochemical/EPC/Power Plants industry.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to[email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Location: Henderson Road

Working Hour: 5 Days work Week 9AM – 6PM

Salary: $4,500 - $5,000

Job Scope

• Be the primary technical contact for customers and in house repair jobs
• Assist customers in the repair and maintenance activities, but also with Providing spare parts and associate services
• Identify and translate customers’ requests ;
• Handle technical incidents and establish reports (troubleshooting, expertise, gathering useful information for analysis
• Guarantee, when necessary, the proper processing of offers : spare parts, onsite interventions and repairs.
• Coordinate onsite interventions actions and ensure an ongoing communication to the customer.
• Provide technical assistance to the Repairs Department and Field Service Technicians + Business Centers ;
• Occasionally promote to customers, technical training sessions and sales of spare parts and repairs ;
• Initiate, together with the appropriate stakeholders, the implementation of corrective actions that arose from customer complaints/claims.
• Be the technical interface within the departments, such as Engineering, Purchasing, Sales, Production, Global Service and customers
• Identify potential sales opportunities and forward the information to the sales teams.
• Identify the spare parts needed for Sales team to quote to customer
• Recommend spare parts needed for regular maintenance/during troubleshooting
• Acts as last form of technical checks to make sure the spares quoted is according to customer’s requirement
• curb warranty costs.
• Be responsible for the collection of outstanding payments for the Customer Service department
• Maintain proper records of interaction with customers within the CRM tool
• Control offers and order confirmation as per applicable procedures

Requirements

• Have 3 to 5 years of experience in Mechanical Engineering. Marine engineering with mechanical knowledge will also be considered.
• Degree in Mechanical Engineering
• With hands on experience on compressors, turbines and pumps mechanically
• Be willing to travel if needed.

Quah Siying (Jeslyn) R1982418

The Supreme HR Advisory Pte Ltd 14C7279

1.Provide First Call Resolution (FCR) technical support via phone and email. Ensure calls are answered and emails are responded in a timely manner.

2.Perform first level troubleshooting on all reported incidents and escalate incidents to 2nd level resolver groups as per work instructions.

3.Furnish and submit timely updates to customers on the status of outstanding issues within targeted Service Level

4.Maintain ownership of cases and follow-up on reported issues until closure and gather accurate and complete relevant information is recorded.

5.Manage customer expectations and notify Team Lead in the event of unusual surge in calls of a specific nature.

6.Handle initial classification/ prioritization of the incidents. Track the progress of resolution and provide regular updates for follow-up actions and incident status.

• Evaluate design package and prepare shop drawing of RC structural works and temporary works.
• Liaise structural design works with design-relevant counter parties and construction team.
• Design of temporary works related to structural design.
• Lead the project department in solving design related matters.
• Manage production, quality, design & engineering and schedule issue.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 5 years of civil & structural works experience in Infrastructure/LTA Projects.
• Proficient in STADD, AutoCAD, MicroStation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Deliver engineering support for wide range of products (RF / Mixed Signal / Digital) through all phases from development to production release.
• Liaise closely with test engineering team and production support team to drive debug activities, reliability qualification and yield enhancement.
• Maintain close interaction with Product Test Engineering team and communicate technical product status to management.

Requirements:

• Diploma in Electronics/Electrical Engineering or equivalent.
• At least 5 years of Product/Test Engineering experience with foundry process background.
• Hands-on experience with Advantest 93K ATE.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Carry out inspections of all roads and road-related facilities.
• Report defects picked up during inspections.
• Report immediately to the Supervisor and the Project Manager any incidents or defects posing immediate concern, safety or inconvenience to the public.
• Submit daily reports on the condition of the roads, footpaths & walkways, service roads & footways, and road-related facilities to the Authority.
• Minimum 3 years experience in civil/ structural engineering works or other engineering equivalent.
• Able to recognize and identify defects on the roads, footpaths & walkways, service roads & footways, and road-related facilities.
• Good knowledge of repair methods for defects identified on roads and road related facilities.
• Minimum qualification --- Degree in Civil

Interested candidates, please forward directly the detailed resume in to [email protected]

Please include following information in the resume

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary in Singapore Dollar

3) Expected salary in Singapore Dollar

4) Personal References

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

This role is required to managed and support 1-Net's IT Services business, including Cloud Services, Managed Services, DC services, and Business Continuity Management Services.

Responsibilities

• Providing 2nd/3rd level support to Network Services
• Problem resolution in customer network issues
• Plan, implement, review and project manage network infrastructure projects and operations
• Test, evaluate and recommend new networking products for customers
• Review and continuously enhance existing network services
• Improve network performance; optimize network usage and bandwidth usage and secure the core network
• Optimize routing policies and capacity management to ensure minimal network latencies and outages
• Secure network with relevant security policies
• Responsive to solve network issues, on standby 24x7
• Assist L1/L2 Engineers to handle customers' issues directly
• Recommend suitable and relevant solutions to solve customers' issues
• Provide maintenance support for all network infrastructure
• Provide monthly network infrastructure performance review report and capacity planning recommendations
• Ensure efficiency and effectiveness of the implemented solutions in meeting user's requirements and work processes and procedures.
• Ensure timeliness & quality of project delivery.
• Structured cabling system implementation and cross connect provisioning.

• Minimum Diploma or equivalent qualification.
• In depth practical experience in LAN/WAN implementation which include router & switches setup and configuration.
• Knowledge and experience with networking protocols, including BGP, VXLAN EVPN, OSPF, IOX-XR, NX-OS
• Structured Network Infrastructure for Layer 2 & 3 support.
• Certification in CCNA, CCNP is highly preferred
• Shift work required

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Responsible for the quality management of machined products to ensure that product quality.
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirements:

• Minimum Bachelor Degree in Mechanical or Industrial Engineering.
• At least 3 years of quality management experience in the machining industry.
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

• Design, build, and maintain CI/CD pipelines using various CI/CD platforms to streamline cloud deployments.

• Integrate automation solutions across applications to enhance operational efficiency.

• Ensure best practices and security are prioritized when developing CI/CD pipelines.

• Continuously improve operational workflows through task automation.

• Collaborate with subject matter experts to ensure automation solutions meet business requirements.

• Act as an innovative, hands-on DevOps engineer, focusing on both the technological and strategic aspects of the platform.

• Proven experience with Kubernetes and containerization technologies.

• Strong understanding about DevOps and DevSecOps terminology.

• Proficiency in automation tools such as Jenkins, GitLab Runner, AWS Lambda, AWS CodePipeline, and AWS CodeBuild.

• Hands-on experience with Infrastructure as Code (IaC) tools like Terraform and CloudFormation.

• Management configuration tool like Ansible, Puppet.

• Familiarity with scripting languages such as Python, Bash, and PowerShell.

• Experience working in multi-cloud environments, including AWS, Azure and GCP

• Exposure to latest technologies
• On the job training

About the company
Our Client is an established company within their industry. They have a well-established presence of more than 10 years. With rapid expansion plan, they are now looking for an IT Engineer / IT Specialist (System & Networks) to join their team.

About the job
Reporting to the IT Manager, your role involves:

• Providing technical support (Computer, printer, mobile device and etc) to users
• Handling networks (Routers, switches, VoIP)
• Supporting and maintaining the Windows Servers and Office 365
• Managing Active Directory (Print Servers, Backup and etc)
• Handling disaster recovery planning
• Managing external vendors, ensuring SLA is being adhered to

Skills and experience required
As a successful applicant, you will have at least 2 years of experience in IT Support. Exposure to IT networks or system will be of added advantage.

Candidates with proven track record in Office 365 / O365 will be of added advantage.

Whats on offer
This is an excellent opportunity to join an established end user environment with on the job training

To apply online please use the 'apply' function, alternatively you can reach me at https://www.linkedin.com/in/hoonteck-nologyrecruitment. (EA: 94C3609/ R1219669)

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

• Position: Desktop Support Engineer (Band 1)
• Working Location: Tuas / Jurong / Changi (Client Site)
• Working Days : 5 Days ( Mon- Fri)
• Working Hours: 8am-5pm
• Salary Range: $2,700-$3,200

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

• Desktop Technician will provide day to day local\remote desktop support, receive inbound calls, answer questions, troubleshoot and document steps performed to resolve challenges with hardware, software and application issues in a ticketing system.
• Facilitate customer resolution for calls and engage their supervisors and managers to ensure operational consistency across all shifts within the IT Support Center.
• Desktop Support Engineer provides Break Fix, fault diagnosis and resolution.
• Providing fault analysis to customer’s various core operating systems and platforms, as well be able to provide support and apply desktop fault resolution for the approved application suite.

Position Responsibilities and Functions

• Provide first/second level contact and problem resolution for customer issues.
• Work with Third Party Vendors to remediate complex AV issues as needed.
• Provide timely communication on issue status and resolution.
• Maintain ticket updates for all reported incidents.
• Install, upgrade, support and troubleshoot XP, Windows 7, Windows 8.1, Windows 10 and Microsoft Office 2010, Cisco Jabber, another authorized desktop application.
• Should have basic knowledge of Mac operating system, to support Apple pc users.
• Install, upgrade, support and troubleshoot for printers, computer hardware.
• Performs general preventative maintenance tasks on computers, laptops, printers.
• Performs remedial repairs on Desktops, laptops, printers and any other authorized peripheral equipment.
• Use diagnostic tools to troubleshoot problems associated with network connectivity, and workstation hardware/software.
• Broad experience of IT with basic understanding of Networks, Servers, Audio/Visual, Smart Devices and Telecoms.
• This position requires the ability to work in a project-based environment requiring flexibility and teamwork. Performs other duties as assigned.

Qualifications and Skills

• Bachelor Degree or equivalent in Computer Science or related field.
• CompTIA A+, Microsoft Certified Professional (MCP) or better.
• 1-2 years’ experience in Windows Desktop support.
• Windows 7-10, Microsoft Active Directory, utilization of GPOs, MS Office 365, PC hardware installation and troubleshooting, Enterprise anti-virus solutions, Helpdesk ticketing systems.
• Mobile device management including IOS and Android devices, Enterprise encryption solutions, Windows PC/laptop management via Active Directory.
• Proven analytical, troubleshooting and problem solving skills.
• Willing to work off-hours and weekends when required for projects or emergency support.

In addition the Band 1 Technician will mentor and assist Band 0 technicians in their work and provide support to Band 2 Technicians in resolving tickets.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

• Conducting maintenance service, commissioning of alarm systems
• Address to customer request on alarm and card access systems

Requirements:

• Basic Security certified
• At least 2 years of working experience
• Possess valid class 3 driving license

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client provides solutions from industries like pharmaceuticals, medical devices, automotive, electrical, industrial, and consumer goods.

• Assemble, troubleshoot, and install stations, ensuring correct pre-alignment and machine performance with support from the Manufacturing Manager.
• Deliver technical training to customers on hardware, pneumatics, setup, and maintenance processes.
• Assist with installations at customer sites and create project documentation.
• Collaborate with Project Engineers to meet deadlines, budgets, and share technical challenges.

Requirements:

• Nitec in Mechanical/Mechatronics engineering
• At least 3 years of experience in the automation or machine building industry.
• Familiar with project documentation and preparing manufacturing documents.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Windows and Linux Engineer

Job Role/Level Engineer, System Engineering

Mandatory Skills Red Hat Enterprise Linux (RHEL)

Preferred Skills Azure, VMware

Brief Job Description

• Plan, execute, monitor and control the various technical aspect of the project.

• Manage or participate in new setup or upgrade of system/network infrastructure projects.

• Responsible for supporting operational systems satisfying contractual Service Level Agreement

• Perform and manage routine preventive maintenance and operational activities

• Provide project documentation and reports

• Diagnose and rectify technical issue

• Managing and Operating Red Hat Linux, Windows VM Infrastructure

o Installation/Configuration/Hardening/Maintenance/Patching

o Maintain System Security

o Advanced Troubleshooting

o Performance Tuning

o Capacity Management

o Preventive/Proactive Support

o Incident/Change/Problem Management

o Provide system administration support and guidance for development team’s app configuration tasks

o Veritas Clustering Setup on RHEL VM would be added advantage

o Chef Automation would be added advantage

o AWS EC2 maintenance

• Managing and Operating VMware vSphere IT infrastructure

Other IT Infrastructure Related Tasks

• Red Hat Enterprise Linux (RHEL) and Windows Administration

• Professional understanding of networking related to RHEL and Windows

• Professional understanding of SAN Storage related to RHEL and Windows

• AWS Certified Solution Architect will be an advantage

• Good understanding of large Data Center Facilities operation

• Hands-On experience supporting various Infrastructure agents like NetBackup

• (Mid-Level) vSphere 7.x.

• Cross-team collaboration with storage, network, security and application delivery

• Technical leadership quality to handle technical challenge and sensitive situations

• Integrate the server automation process either by custom scripts or via third-party solutions(Ansible)

• Candidate should have the drive and intellectual horsepower to resolve user issues and support them through telephone, email, or via chat services as applicable

• Strong communications skills

• Excellent spoken and written English communication skills

Candidates with at least 1 year of relevant experience in RHEL preferred.

Candidates with some work experience and possess exposures/ knowledge in RHEL are welcome too.

Job Responsibilities:

• Will be assigned to a project to provide technical support and department relevant responsibilities.
• Assisting C&S lead/technical manager & in charge for all civil / structural engineering matters being tasked
• Attending and being proactive in design coordination meeting with consultants / client.
• Preparing and reviewing of shop drawings / materials / MOS
• Ensure drawing registry is maintained and latest drawings / BIM models are available for all parties involved (site staff, CTD, suppliers and subcontractors).
• Ensure transmittal forms / emails are issued for latest drawings / BIM models when issued to CTD, suppliers and subcontractors.
• To study & review drawings / specifications in identifying discrepancies and issue queries to consultants accordingly via RFI
• Resolve technical issues on drawings and liaise closely with Consultants, all trades and authorities.
• Ensure BIM team update the drawings / BIM Model with the latest information available timely.
• Upkeep all submission, response for the submission and approval. Monitor the status of the submission and pursue response from the relevant parties once the response is due.
• Prepare as-built drawings / BIM Model and compile O&M Manual for submission.
• Attending VDC for civil / structural related matters. Cross check BIM model with contract drawings.
• To ensure works are carried out in accordance with drawings, specifications and PE design.
• To ensure material testing are carried out in timely manner and as per the specifications.
• To identify and resolve any potential site issues at the work site from technical aspect
• Attending sub-con meetings and technical meetings for structural related matters; prepare and circulate meeting minutes in a timely manner.
• Ensure all structural submissions (as-built, ST COS etc) are done prior to TOP application.
• Work with senior, PM and Site Manager in planning and executing temporary works.
• Preparing as-built drawings and submission of O&M.
• Assisting senior for structural matters related to CONQUAS assessments / submissions.

Job Requirements:

• Degree in Civil / Structural or a related discipline
• A minimum of 3 years of relevant experience for Structural engineer & 6 years of relevant experience for Senior engineer
• Proficient in Microsoft Office, AutoCAD and proficiency in BIM.
• Understanding of structural engineering principles and practices.
• Knowledge of authority submission requirement
• Able to communicate with consultants, client, authority/government agencies and site supervisors.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.