Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Responsibilties

• Coordinating all O&M and plant outage activities to achieve safe, reliable and efficient operation of the Power Station
• Supporting and liaising with relevant Asset/Operation departments for long term power station turnaround planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation
• To fully develop and utilize the CMMS for efficient and effective O&M Planning practice and co-ordination with service provider for license management, backup, individual account management and software upgrade
• Fully utilizing the CMMS to ensure all O&M activities and experiences are recorded to comply with Station, legislative and company policy requirements
• To assist fully with and help implement all HSE practices and a Quality Management System as applied to the Power Station
• Perform review on maintenance plans, monthly maintenance report and consolidation of planned and unplanned outage reports
• Review the completeness and organize the filing of departmental documentations
• Additional tasks and responsibilities given by power plant management
• Provide close and constant liaison between operations and maintenance through the individual coordinators
• Provide data expert analysis and advise on maintenance / operations performance
• Responsible to track , safe keeping of the necessary documentation of “ Management of Change” and ensures the process is closed and updated the changes in CMMS & O&M manuals accordingly
• Preferably with MAXIMO, SAP & PREMAVERA and Microsoft project experience
• Organizing the meetings with 3rd party vendors & MMA( Major Maintenance Agreement) meeting

Job Requirements

• Degree / Diploma graduate in relevant engineering field
• Knowledge on operation and maintenance activities of Combined Cycle Power Plant
• Knowledge on project management and resource planning
• Knowledge in maintaining maintenance record in CMMS
• At least 2 years of relevant working experience in Power Plant Maintenance ideally on a CCPP (any manufacturing industry)
• Experience involvement in technical aspects of Power Plant operation and maintenance
• The post holder shall be medically fit and able to undertake the duties of the post and any additional duties as detailed in the Power Station Emergency Response Plan
• Plant availability, plant reliability, work order performance and outage duration
• Administrator for Power Station CMMS system
• Work in all areas of the plant site (both indoor & outdoor environment)

Project Design & Engineering Calculations and Proposal drawings to Client Management.

Preferable 2D & 3D knowledge in AutoCAD & Autodesk Inventor or Solid Works

Reverse Engineering as per Equipment sample or Site measurement studies

Analyse sub-contractor proposals, design and calculation feasibility study.

Coordinate with Government and various agencies.

Inspect and review projects to monitor compliance with safety codes, and other regulations.

Manpower planning, deployment and control and on-time schedule.

Coordinate to resolve engineering and construction issues and manage the schedule.

Safety mindset and ability to develop RA and permit to work application.

Maintain proper project documentation and ensure accuracy of all design submissions to comply with project specifications and clients’ requirements.

Monitoring of site activities, material requisition, cost control, project supervision and schedule of works

Ensure that works are executed within an acceptable standard of workmanship and in line with safety procedures

Understand and ensure compliance in project requirement and scope of work

Issuing of material requisition form, assist in purchasing materials/items required by production/customers, prepare marketing material & etc.

Prepare contracts and negotiate revisions, changes and additions to contractual agreements with Engineering approval from Authority, consultants, clients, suppliers and subcontractors.

Establish effective communications with the Client's field representative, through discussions, and such other arrangements as are required to maintain close working relationships.

Any adhoc duties as assigned by management.

Min 3-5 years’ of experience in Engineering mfg, Recycling, Oil & Gas and Chemical plant industry.

Applicable for Only Singaporeans & PR's.

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in promoting spare part sales, maintenance, operation, equipment installation supervision and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Promoting aftermarkets/replacement spare parts or services for existing and potential new customers

· Identify customer's needs and sales opportunities to help future growth

· Provide technical field assistance in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training or maintenance presentations to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD is a plus point.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

· Technically sound and consistently designed and delivered to client’s project requirements

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned.

· Assist Professional Engineer in management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Diploma in Mechanical Engineering from a recognized Polytechnic with more than 5 years of working experience in engineering design consulting practice on Building Services projects

· Degree in Mechanical Engineering from a recognized University and eligible for registration with the Professional Engineers Board with more than 3 years of working experience in engineering design consulting practice on Building Services projects.

· Being a Professional Engineer is an advantage.

· Strong project technical knowledge and design softwares

· Good supervision and project management skills

· Excellent with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Lead team of staff for successful delivery of projects

· Strong analytical skills would be preferred

· Excellent interpersonal, good written and verbal communication skills

· Strong time management and resources management skill

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

About Us

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT storage solution has an expected life span of 25 years and is proven to be one of the safest and most environmentally friendly battery technologies. VFT founders have deep experience in the renewable space, and Vanadium redox flow technology. VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU.

The Cloud Software Engineer must be able to work effectively in a collaborative, fast paced environment providing experience on energy storage systems. They will demonstrate strong project management, development, and execution capabilities. The successful candidate will be an innovative thinker, fast-learner, collaborative worker, and self-starter with a passion for the renewable energy industry holding a track record of success thriving in a high growth environment.

Responsibilities:

· Develop and Collaborate on IoT products and solution in cloud based IoT Platform by interfacing Energy Management Systems (EMS) and Battery Management System (BMS).

· Design, Development, Testing and Maintenance of IoT Cloud Software stack in Energy Management Systems (EMS) and Battery Management System (BMS).

· You should be familiar with the operation of ESS (Energy Storage Systems) and implement various energy and battery management graphs and data display and will need to have passion for battery and energy management solutions.

· You should follow software development lifecycle practices including design and reviews, testing and regression, revision control, and user documentation.

Requirements:

· Minimum Bachelor’s Degree in computer/electronics engineering or relevant discipline with minimum 2 years of relevant professional development experience.

· Must have software development experience in C/C++, Python, JavaScript, NodeJS, JSON and SQL or other relevant programming languages.

· Experience with IOT cloud technology, instrumental monitoring, remote monitoring and IoT Device knowledge (Gateway, Sensor).

· You should have knowledge of communication interfaces and protocols, such as RS232, RS485, CAN, Modbus-TCP, Modbus-RTU, etc.

· Familiar in DevOps practices and CI/CD pipelines

· You will be required to travel for business.

· Knowledge on battery technology would be ideal

Mandatory Skills

Key Responsibilities

• Create complex, enterprise-transforming applications in high-energy, collaborative teams.
• Work with the latest tools and techniques in a hands-on coding environment, often utilizing pair programming.
• Build high-quality, maintainable code in a collaborative team environment.
• Demonstrate a solid understanding of model implementation, data structures, data manipulation, distributed processing, application development, and automation.
• Possess knowledge of consumer financial products, data systems, environments, and processes critical for the implementation of Risk and Finance models.

Essential Skills & Prerequisites

• Bachelor’s/Master’s degree in Computer Science, Engineering, Sciences, Mathematics, or a numerate subject, with 6 years of relevant experience.
• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:
• Designing and developing applications using Python.
• Working on the Hadoop platform (Hive, HDFS, and Spark).
• 3–5 years of experience in Unix shell scripting and SQL.
• 2–3 years of experience in Spark programming.
• Knowledge of microservices architecture and cloud computing is an advantage.
• Familiarity with Java and Scala is beneficial.

Desired Skills

• Additional experience in developing service-based applications.
• Excellent analytical skills, including proficiency in MS Office and the ability to produce board-level documentation.
• Fluency in written and spoken English, with strong communication and interpersonal skills.
• Self-starter with the ability to meet challenging personal targets and maintain a big-picture outlook with attention to detail.
• Understanding of current technologies used by Tier 1 Investment Banking Institutions.
• Team-oriented mindset.
• Advantageous experience includes:
  • Working in the financial or banking industry.
  • Knowledge of Avaloq, Windows Batch Scripting, T-SQL, and Python.

Mandatory Skills Summary

• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:

· Python development.

· Hadoop platform (Hive, HDFS, Spark).

• 3–5 years of experience in:

· Unix shell scripting.

· SQL development.

• 2–3 years of experience in Spark programming.

Mandatory Skills

Key Responsibilities

• Create complex, enterprise-transforming applications in high-energy, collaborative teams.
• Work with the latest tools and techniques in a hands-on coding environment, often utilizing pair programming.
• Build high-quality, maintainable code in a collaborative team environment.
• Demonstrate a solid understanding of model implementation, data structures, data manipulation, distributed processing, application development, and automation.
• Possess knowledge of consumer financial products, data systems, environments, and processes critical for the implementation of Risk and Finance models.

Essential Skills & Prerequisites

• Bachelor’s/Master’s degree in Computer Science, Engineering, Sciences, Mathematics, or a numerate subject, with 6 years of relevant experience.
• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:
• Designing and developing applications using Python.
• Working on the Hadoop platform (Hive, HDFS, and Spark).
• 3–5 years of experience in Unix shell scripting and SQL.
• 2–3 years of experience in Spark programming.
• Knowledge of microservices architecture and cloud computing is an advantage.
• Familiarity with Java and Scala is beneficial.

Desired Skills

• Additional experience in developing service-based applications.
• Excellent analytical skills, including proficiency in MS Office and the ability to produce board-level documentation.
• Fluency in written and spoken English, with strong communication and interpersonal skills.
• Self-starter with the ability to meet challenging personal targets and maintain a big-picture outlook with attention to detail.
• Understanding of current technologies used by Tier 1 Investment Banking Institutions.
• Team-oriented mindset.
• Advantageous experience includes:
  • Working in the financial or banking industry.
  • Knowledge of Avaloq, Windows Batch Scripting, T-SQL, and Python.

Mandatory Skills Summary

• Hands-on development experience with PySpark, Scala Spark, and distributed computing.
• 4–6 years of experience in:

· Python development.

· Hadoop platform (Hive, HDFS, Spark).

• 3–5 years of experience in:

· Unix shell scripting.

· SQL development.

• 2–3 years of experience in Spark programming.

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Identify, propose and evaluate new business opportunities for business growth, with respect to the sale/purchase of refining products including procurement of intermediate components for value-added feedstock/blending entities, and third-party service collaboration.
• Coordinate with internal and external stakeholders to establish operating, commercial and accounting procedures for managing third-party contracts and agreements.
• Oversee day-to-day refinery performance and ensure stakeholders adherence to contractual quantity and obligations. Liaise and collaborate with stakeholders to resolve issues and concerns.
• Work closely with internal stakeholders to support the needs of refinery feedstock demand and supply of products, to achieve optimal refinery operation.

• Degree in Chemical Engineering

• At least 2 years' relevant experience in oil refinery/petrochemical.
• Experience in process/development engineering or commercial work knowledge will be advantageous

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Investigate and analyse incidents pertaining to rotating equipment failure or malfunction in order to identify root causes of problems and recommend & implement solutions.
• Identify, analyse and troubleshoot machinery deficiencies and make recommendation for improvement.
• Monitor and review implementation of Preventive Maintenance program to achieve high plant availability.
• Monitor Condition Monitoring program, analyse and propose recommendations for predictive maintenance.
• Establish programs and initiatives to maximize plant availability and equipment reliability

• Degree in Mechanical Engineering
• At least 4 years' experience in maintenance of plant equipment especially rotating machinery, preferably in oil/petrochemical or related industries

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

Introduction:

The Energetix Sustainability Suite is an Enterprise IoT platform using AI to integrate sensor data streams and intelligent controls to perform Energy Monitoring, optimise Lighting, Plug Loads and ACMV, manage Air Quality, Occupancy and Data Centre Infrastructure. Our customers have reduced energy consumption by up to 40%.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management.

Job Description:

• Overall responsible for all aspects of the project implementation lifecycle. Plan, coordinate, and execute IoT deployments to help digitalize the built environment, including the site assessments, installation and configuration of devices and sensors to monitor and optimize energy consumption. Collaborate with multidisciplinary teams, including software engineers, data analysts, and facility managers, to design and implement effective monitoring and control solutions. Provide field technical support and maintenance for projects, working closely with Helpdesk to troubleshoot and fix site related issues. Document project progress, findings, and recommendations for continuous improvement.
• Analyze and interpret data collected from IoT devices to generate actionable insights for clients and stakeholders and to feed AI engines. Provide technical support and training to clients and end-users on the operation and maintenance of IoT systems. Instrumentation / IoT Devices will include electrical meters, BTU meters, IAQ Sensors, Controllers and various types of sensors and controllers as well as interfacing with Building Management Systems and PLCs.
• Work closely with Account Managers, Consultants and Contractors to engage customers, drive understanding of our solutions, influence tender specifications, qualify and perform demos and POCs and Pilot projects.

Job Requirements:

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel within Singapore and Johor Malaysia.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• At least 4 year(s) of M&E working experience in the related field is required for this position.
• Familiar with construction site activities.
• Work Location: West Region
• Strong analytical and problem solving skills.
• Good communication and interpersonal skills.

· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The responsibilities shall include, but are not limited to, those contained in the following statements:

1. direct liaison with stakeholders in charge of project services (procurement/ draughting/ assets/ human resources);

2. specify scope of work and budgets for engineering activities, assets and 3rd party activities;

3. to be conversant with all items and conditions of the project both technically and commercially and to have a full understanding of the scope of work;

4. implementation, control and monitoring of overall safety and quality assurance in all project related activities as laid down in the company’s management system;

5. preparation and maintenance of budgets for the project assisted by the cost controller

6. preparation of the monthly reporting internal & external;

7. ensuring variations between actual costs and budget are monitored and controlled;

8. identifying and initiating any variations towards the client or approve/ reject variations from third parties on the basis of the contract T&C’s;

9. liaise with the client and ensure that project meetings are held with relevant personnel;

10. establishing all the resources from company’s departments needed to carry out the project.

11. encourage any technical developments or suggestions that will enhance the overall project engineering or operational efficiency;

12. ensure that all aspects of project administration, engineering and operations fulfil the contract requirements and are conducted in a safe, efficient and profitable manner;

13. conduct all activities within the management system, procedures and work instructions;

14. advise and assist commercial department with tenders for potential work;

15. ad-hoc duties as deemed required to complete the workscope.

Responsibilities:

• Perform feasibility study, concept design, front end engineering design (FEED) and detailed designs for concrete and steel structures in Energy and Industrial related facilities such as pile foundation, footings, pilecaps, pipe racks, sleepers, pipe bridge, equipment plinths, underground pipeline culvert, drainage, sewerage, road works
• Prepare related material take off (MTO) for cost estimates
• Prepare tender specifications, project requirement, carry out tender evaluation for projects
• Conduct project presentation to clients and stakeholders
• Project management for engineering works
• Perform authorities’ pre-consultation, submissions and liaison with authorities for necessary approvals and permits

Requirements:

• Degree in C&S Engineering, preferably from a university recognised by Singapore Professional Engineers’ Board (PEB), with strong competency in concrete, steel and foundation design.
• Able to perform concrete and steel structural analysis and design, and preferably also working knowledge in using application related to geotechnical design like Plaxis and Geoslope.
• Experience in marine facilities’ design would be an added advantage
• Minimum 5 years of relevant design experience in concrete, steel and foundation structures, drainage, sewerage and road works, preferably in a consultancy firm
• Candidate with more than 15 years of relevant design experience and/or a locally registered Professional Engineer will be considered for higher position
• Knowledge in Eurocodes, BS Codes. Knowledge in NFPA, API would be an added advantage
• Conversant with local authorities’ requirement, pre-consultations and submissions
• Experience in performing feasibility study, conceptual, FEED and detailed design, preferably, able to perform basic CAD drafting
• Possesses skill in project management, conducting presentation, effective communication and good report writing skills
• Good spoken and written English
• Fluency in spoken and written Chinese would be an advantage
• Able to travel for oversea projects at short notice

· Preparation of design report, calculation, drawings, specification, cost estimates and schedules for project assigned

· Management of preparation, liaison, and follow up with authority submission and approval.

· Liaison with client, architects, QS and other project consultants throughout the duration of projects.

· Supervise and guide employees assigned to the projects

· Role as project manager

· Implementation of QA/ QC

· Any other duties as assigned

Requirements:

· Degree in Electrical Engineering from a recognized University and eligible for registration with the Professional Engineers Board

· Professional Engineer Certification will be an advantage

· At least 6 years of working experience in engineering design consulting practice on mechanical projects.

· Good project technical knowledge and design softwares

· Good project management and technical skills

· Familiar with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Team player and able to work independent with minimum supervision

· Able to work under pressure with good time management skill

· Good analytical skills would be preferred

If you wish to have the opportunity to work in an international consultancy firm which offers attractive remuneration, a 5-day week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact number to

2 International Business Park #06-08

The Strategy Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified.)

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities：

1. Responsible for pre-sales support of products and problem solving solutions, assisting sales to research and analyze customer demand, formulating technical proposal and tender, expounding on technical solutions, demonstrating products and answering technical inquiries.

2. Assist sales to promote and sell products and problem solving solutions.

3. Collect and feed back customer’s opinions on products and technology to the technical department. Deepen solutions according to customer’s demand, and assist technical engineers to implement solutions.

4. Conduct relevant technical training for internal sales and pre-sales as well as external partners.

Requirements：

1. Bachelor degree or above; Computer, automatization or logistics majors are preferred.

2. Have three years and above experience in logistics automation, e-commerce or ERP-WMS; Experience in solution design, technical consultation, and project bidding is preferred.

3. Capable of analyzing, guiding demand and designing solutions in logistics, manufacturing storage, e-commerce and related IT systems.

4. Problem solving oriented , honest, pragmatic and responsible, highly enthusiastic and a team player.

5. Good communication and presentation skills, English can be used as working language; Proficiency in two or more foreign languages is preferred.

6. Willing to travel a lot.

...

Energy Engineer

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

About the Role:

In this role, you will support the site energy sustainability program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and manage projects to implement improvements.

Besides, you will support Engineering Services to meet profit plan targets, optimize cost effectiveness, and lower utility operation in accordance with cGMP and Safety guidelines, with emphasis on reliable and stable operation.

Critical Responsibilities but not limited to:

Cost Transformation and Energy Management

• Support cost transformation for utilities program. Will be the project owner, ensuring projects are implemented on schedule, validated in accordance to commitment and accuracy of reports. Conduct analysis; identify risks and proposal for mitigation and to report out to the governance committee.
• Support the site energy efficiency program and introduce good energy management practices to improve energy efficiency and reduce environmental impact. The program shall be in alignment with the global energy conservation program and Singapore Energy Act. Support site to analyze energy efficiency opportunities, leverage expertise and drive projects to implement improvements.
• Support the site energy conservation program with all stakeholders to ensure site wide consistency in energy awareness, energy conservation and active participation in our site energy conservation program
• Support the computerized energy monitoring system for the site to drive efficiency and sustainability
• Support the development of annual and long-term strategic energy capital projects to ensure continuous energy efficiency improvement and energy conservation sustainability, in alignment with the site’s energy policies.
• Provide expertise in conducting energy audit, evaluating options and providing solutions
• Promote energy efficiency program for the company to ensure high level of awareness by all employees in energy usage and energy efficiency in equipment operation
• Network with the energy subject matter experts from other sites, the Global Energy Team, other Pharma Energy Improvement team and the government to recommend proven or new energy savings program and initiatives and continuously seek new energy conservation technologies with subject matter experts
• Monitor and analyze key performance indices and take mitigation actions to ensure objectives are met and where appropriate to escalate

Engineering Services Support

• Coordinate with GES on site process engineering design, construction and equipment validation activities when appropriate
• Supports Energy Lead – Engineering to develop Profit Plan forecast, execute activities to meet production, cost effectiveness, and cost reduction targets
• Any other tasks as and when assigned by Energy Lead

Management of Maintenance, Utilities & Facilities

• Support utility / process / system energy efficiency program – compilation of data, analysis of data and recommendation to stakeholders to reduce wastage or find alternative energy efficient methodology
• Collaborate with maintenance and utilities managers to ensure all equipment have an effective PM or predictive program to ensure all equipment are in high energy efficiency operations
• Support the development of system and program to track energy conservation projects, cost savings from new initiatives and prepare stretch goal for each year to reduce cost of energy for the site
• Prepare utility budgets, monitor actual billing spending and track energy conservation projects against this budget. Analyze and report out risk and mitigation plans.
• Coordinate the implementation of energy projects with utilities operation with least impact to manufacturing

Management of Capital Plans & Projects

• Recommend energy efficient process, system or proven equipment to Project Engineers in their capital planning process or in their capital procurement plan
• Coordinate and update global energy project planning system to maintain a good energy conservation pipeline for each year and over a 3-5 years period to ensure energy sustainability and reducing site energy consumption levels
• Ensure projects are timely, on budget and completed in compliance to safety and quality
• Due to diversity of the site and the complexity of projects, priority of projects and changes of priority affects the planning process. This position is frequently required to take appropriate decisions and actions to engage stake holders from peer level or next level managers for resolution. For the energy reduction role, he is to analyze, develop projects, prioritize and plan for the resources to complete the projects.

SHE

• Consistently show safety leadership by demonstrating advance understanding of all safety procedures and standards
• Seek opportunities to improve company SHE standards and move company towards goal on injury free workplace & better environment

cGMP Standards

• Consistently demonstrates advanced understanding of the importance of cGMP and WQS standards
• Consistently demonstrates an advanced understanding of the importance of cGMP regulations related to their work and consistently develops and executes appropriate solutions
• Seek opportunities to improve company cGMP standards and move company towards goal of Sustainable Compliance
• Subsystem owner for QMS Chapter 18 – Plant Maintenance Calibration.

Requirements:

• Bachelor’s Degree in Engineering related fields
• Singapore Certified Energy Manager
• At least 5 years’ experience in energy engineering, manufacturing, consultancy or equivalent industry
• Demonstrate leadership behaviour
• Project management expertise to execute large and/or complex projects, work in cross-functional teams to complete projects successfully within budget, schedule and quality requirements.
• Knowledge of applicable regulations and divisional policies/guidelines, especially equipment design, equipment qualification, preventive maintenance, and calibration.
• Demonstrated capability in vendor service contracts management & knowledge of our System Life Cycle Methodology.
• Understands maintenance programs and requirements (reliability-centred, preventative, predictive).
• Stewardship awareness, including cGMP, regulatory inspection preparation, and SHE.

Reg No: R22104540

EA License no: 94C3609

Job Description:

Technical Support:

• Respond to and resolve IT support requests via phone, email or ticketing system
• Diagnose and troubleshoot hardware, software and network issues
• Install, configure and maintain computer systems and software applications

Hardware and Software Management:

• Manage the setup and maintenance of laptops, printers and other IT equipment
• Perform regular updates, patches and upgrades to ensure optimal performance and security

Network Support:

• Assist in maintaining LAN/WAN connectivity, Wi-Fi setups and VPN configurations
• Identify and resolve network related problems, including internet outages and connectivity issues

Incident and Problem Management:

• Log and track issues using a Service Desk Management tool
• Escalate unresolved problems to higher-level support teams or vendors
• Follow-up to ensure timely resolution of incidents

Security Compliance:

• Support adherence to IT security policies and procedures
• Assist with data backups and cybersecurity measures
• Maintain an accurate record of all service assets and configurations

Job Requirements:

• Applicant MUST meet these minimum qualifications to be considered an applicant
• Minimum 5 years of IT support or equivalent experience
• BS in Computer Science, Information Technology, or related field or equivalent experience preferred
• Experience in administration of Microsoft technologies such as Active Directory, Office 365, SharePoint
• Familiarity with networking fundamentals (TCP/IP, DNS, DHCP)
• To possess relevant certification with ITIL frameworks; Microsoft Certified
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal abilities
• Pleasant attitude, approachable and friendly demeanor
• Ability to manage time and multitask effectively
• Patience and adaptability in handling technical issues and working with users of varying technical proficiency

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING